public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ben Dooks <ben-linux@fluff.org>
To: Ben Dooks <ben-linux@fluff.org>
Cc: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
	dbrownell@users.sourceforge.net
Subject: Re: GPIO: Fix probe() error return in gpio driver probes
Date: Sun, 14 Dec 2008 21:33:49 +0000	[thread overview]
Message-ID: <20081214213349.GA19483@fluff.org.uk> (raw)
In-Reply-To: <20081212152426.745254309@fluff.org.uk>

On Fri, Dec 12, 2008 at 03:24:27PM +0000, Ben Dooks wrote:
> A number of drivers in drivers/gpio return -ENODEV when confronted
> with missing setup parameters such as the platform data. However,
> returning -ENODEV causes the driver layer to silently ignore the
> driver as it assumes the probe did not find anything and was only
> speculative.
> 
> To make life easier to discern why a driver is not being attached,
> change to returning -EINVAL, which is a better description of the
> fact that the driver data was not valid.
> 
> Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Has anyone reveiwed this patch? Are there any comments, or can this
be commited at somepoint (even if it is during the next merge window)?

> Index: linux.git7/drivers/gpio/max7301.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/max7301.c	2008-12-12 13:35:42.000000000 +0000
> +++ linux.git7/drivers/gpio/max7301.c	2008-12-12 13:36:12.000000000 +0000
> @@ -218,7 +218,7 @@ static int __devinit max7301_probe(struc
>  
>  	pdata = spi->dev.platform_data;
>  	if (!pdata || !pdata->base)
> -		return -ENODEV;
> +		return -EINVAL;
>  
>  	/*
>  	 * bits_per_word cannot be configured in platform data
> Index: linux.git7/drivers/gpio/max732x.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/max732x.c	2008-12-12 13:36:22.000000000 +0000
> +++ linux.git7/drivers/gpio/max732x.c	2008-12-12 13:36:28.000000000 +0000
> @@ -268,7 +268,7 @@ static int __devinit max732x_probe(struc
>  
>  	pdata = client->dev.platform_data;
>  	if (pdata == NULL)
> -		return -ENODEV;
> +		return -EINVAL;
>  
>  	chip = kzalloc(sizeof(struct max732x_chip), GFP_KERNEL);
>  	if (chip == NULL)
> Index: linux.git7/drivers/gpio/mcp23s08.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/mcp23s08.c	2008-12-12 14:10:01.000000000 +0000
> +++ linux.git7/drivers/gpio/mcp23s08.c	2008-12-12 14:11:19.000000000 +0000
> @@ -311,7 +311,7 @@ static int mcp23s08_probe(struct spi_dev
>  
>  	pdata = spi->dev.platform_data;
>  	if (!pdata || !gpio_is_valid(pdata->base))
> -		return -ENODEV;
> +		return -EINVAL;
>  
>  	for (addr = 0; addr < 4; addr++) {
>  		if (!pdata->chip[addr].is_present)
> Index: linux.git7/drivers/gpio/pca953x.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/pca953x.c	2008-12-12 13:33:47.000000000 +0000
> +++ linux.git7/drivers/gpio/pca953x.c	2008-12-12 13:33:55.000000000 +0000
> @@ -201,7 +201,7 @@ static int __devinit pca953x_probe(struc
>  
>  	pdata = client->dev.platform_data;
>  	if (pdata == NULL)
> -		return -ENODEV;
> +		return -EINVAL;
>  
>  	chip = kzalloc(sizeof(struct pca953x_chip), GFP_KERNEL);
>  	if (chip == NULL)
> Index: linux.git7/drivers/gpio/pcf857x.c
> ===================================================================
> --- linux.git7.orig/drivers/gpio/pcf857x.c	2008-12-12 13:34:33.000000000 +0000
> +++ linux.git7/drivers/gpio/pcf857x.c	2008-12-12 13:34:54.000000000 +0000
> @@ -189,7 +189,7 @@ static int pcf857x_probe(struct i2c_clie
>  
>  	pdata = client->dev.platform_data;
>  	if (!pdata)
> -		return -ENODEV;
> +		return -EINVAL;
>  
>  	/* Allocate, initialize, and register this gpio_chip. */
>  	gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
> @@ -249,7 +249,7 @@ static int pcf857x_probe(struct i2c_clie
>  			status = i2c_read_le16(client);
>  
>  	} else
> -		status = -ENODEV;
> +		status = -EINVAL;
>  
>  	if (status < 0)
>  		goto fail;
> 
> -- 
> Ben (ben@fluff.org, http://www.fluff.org/)
> 
>   'a smiley only costs 4 bytes'
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

-- 
Ben (ben@fluff.org, http://www.fluff.org/)

  'a smiley only costs 4 bytes'

  reply	other threads:[~2008-12-14 21:34 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-12 15:24 GPIO: Fix probe() error return in gpio driver probes Ben Dooks
2008-12-14 21:33 ` Ben Dooks [this message]
2008-12-15  0:11   ` David Brownell
2008-12-15  7:46     ` Jean Delvare
2008-12-15 10:16       ` Ben Dooks
2008-12-15 10:22         ` Jean Delvare
2008-12-18 18:16           ` David Brownell
2008-12-18 22:29             ` Ben Dooks
2008-12-15 10:15     ` Ben Dooks
  -- strict thread matches above, loose matches on Subject: below --
2009-01-07 12:56 ben
2009-01-08 12:20 ` Ben Dooks
2009-01-07 13:03 Ben Dooks

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081214213349.GA19483@fluff.org.uk \
    --to=ben-linux@fluff.org \
    --cc=dbrownell@users.sourceforge.net \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox