Re: [Regression] Build failure in current mainline - firmware related

["Rafael J. Wysocki" <rjw@sisk.pl>]

On Saturday 03 January 2009, Sam Ravnborg wrote:
> On Sat, Jan 03, 2009 at 09:49:48PM +0100, Sam Ravnborg wrote:
> > On Sat, Jan 03, 2009 at 12:47:14PM +0100, Rafael J. Wysocki wrote:
> > > Hi,
> > > 
> > > I get the following error from 'make modules_install' on my test boxes:
> > > 
> > >   HOSTCC  firmware/ihex2fw                                                             
> > > /home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system                                            
> > > compilation terminated.                                                                
> > > make[3]: *** [firmware/ihex2fw] Error 1                                                
> > > make[2]: *** [_modinst_post] Error 2                                                   
> > > make[1]: *** [sub-make] Error 2                                                        
> > > make: *** [all] Error 2
> > > 
> > > where the configuration is that the kernel is compiled on a build box
> > > with 'make O=<destdir> -j5' and then <destdir> is mounted over NFS read-only by
> > > each test box (full path to this directory is the same on the build box and on
> > > the test boxes).  Then, I cd into <destdir>, run 'make modules_install' and get
> > > the error above.
> > > 
> > > 2.6.28 didn't have this problem.
> > 
> > 
> > Strange...
> > 1) The string "opening dependency file" does not occur in my freshly pulled kernel
> > 2) Line 268 is last line of ihex2fw.c
> > 
> > Could you try to do a "make modules_install V=1" to see the exact arguments supplied ti ihex2fw.c
> > 
> > I gave up on all the firmware stuff long time ago and has
> > never properly reviewed the implementation so I really
> > have no clue what is actually happening.
> > 
> > Walking through the 179 lines Makefile has not yet benn on my
> > "fun to do" list - and it most likely take a while before it hits it.
> 
> Took a quick peek. The Makefile uses "order only" in three spots.
> This alone demand make version 3.80 IIRC and Documetnation/Changes
> says 3.79.1...
> 
> The "order only" is so rare that Paul Smith once said that
> coming up with a good example of usage was not easy.
> 
> For the headers_* stuff I recall when I reworked it I could
> kill the usage of "order only" there but now it crept
> back - sigh!

Well, in the meantime I ran 'make modules_install V=1' and this is the
last thing printed (the previous ones are not really interesting):

make -f /home/rafael/src/linux-2.6/scripts/Makefile.fwinst obj=firmware __fw_modinst
  gcc -Wp,-MD,firmware/.ihex2fw.d -Ifirmware -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -o firmware/ihex2fw /home/rafael/src/linux-2.6/firmware/ihex2fw.c
/home/rafael/src/linux-2.6/firmware/ihex2fw.c:268: fatal error: opening dependency file firmware/.ihex2fw.d: Read-only file system
compilation terminated.
make[3]: *** [firmware/ihex2fw] Error 1
make[2]: *** [_modinst_post] Error 2
make[1]: *** [sub-make] Error 2
make: *** [all] Error 2

It fails because of the attempt to compile ihex2fw .

Thanks,
Rafael