From: Alessandro Zummo <alessandro.zummo@towertech.it>
To: BARRE Sebastien <sbarre@sdelcc.com>
Cc: Ed Swierk <eswierk@aristanetworks.com>,
"i2c@lm-sensors.org" <i2c@lm-sensors.org>,
David Brownell <david-b@pacbell.net>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH] rtc-ds1307: True SMBus compatibility
Date: Tue, 6 Jan 2009 23:06:33 +0100 [thread overview]
Message-ID: <20090106230633.251c199e@i1501.lan.towertech.it> (raw)
In-Reply-To: <C1C62166118DFA4A8BBA01A2411F0D171224AECDC1@PRI-MBX-101.dom1.vinci-energies.net>
On Tue, 6 Jan 2009 14:35:05 +0100
BARRE Sebastien <sbarre@sdelcc.com> wrote:
> > Reading or writing registers repeatedly until they stick is rather
> > nauseating but I'm aiming for correctness if not elegance. I would
> > appreciate any suggestions for improvement.
> >
> > Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
>
> I've read your patch quicly, I will test it on my board as soon as possible.
Ok, I'll wait for a Tested-by before acking it.
--
Best regards,
Alessandro Zummo,
Tower Technologies - Torino, Italy
http://www.towertech.it
next prev parent reply other threads:[~2009-01-06 22:06 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-05 17:36 [PATCH] rtc-ds1307: True SMBus compatibility Ed Swierk
2009-01-06 13:35 ` BARRE Sebastien
2009-01-06 22:06 ` Alessandro Zummo [this message]
2009-01-06 22:13 ` Ed Swierk
2009-01-07 14:22 ` BARRE Sebastien
-- strict thread matches above, loose matches on Subject: below --
2009-01-05 17:41 Ed Swierk
2009-01-06 22:48 ` David Brownell
2009-01-07 13:24 ` Jean Delvare
2009-01-07 15:22 ` Ed Swierk
2009-01-07 15:27 ` Jean Delvare
2009-01-07 15:43 ` Ed Swierk
2009-01-07 15:49 ` Jean Delvare
2009-01-19 23:59 ` Ed Swierk
2009-01-20 10:43 ` Jean Delvare
2009-01-26 6:33 ` Ed Swierk
2009-01-26 9:37 ` Jean Delvare
2009-01-26 21:06 ` David Brownell
2009-01-26 21:54 ` Ed Swierk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090106230633.251c199e@i1501.lan.towertech.it \
--to=alessandro.zummo@towertech.it \
--cc=akpm@linux-foundation.org \
--cc=david-b@pacbell.net \
--cc=eswierk@aristanetworks.com \
--cc=i2c@lm-sensors.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sbarre@sdelcc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox