public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Ingo Molnar <mingo@elte.hu>
To: Avuton Olrich <avuton@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>, LKML <linux-kernel@vger.kernel.org>
Subject: Re: Fail to early boot with v2.6.27-rc2 to at least v2.6.29-rc2 due to dc1e35c
Date: Thu, 22 Jan 2009 09:28:01 +0100	[thread overview]
Message-ID: <20090122082801.GA10012@elte.hu> (raw)
In-Reply-To: <3aa654a40901211826s430487c1i882fb5c4b8fa92a9@mail.gmail.com>


* Avuton Olrich <avuton@gmail.com> wrote:

> On Wed, Jan 21, 2009 at 4:38 PM, H. Peter Anvin <hpa@zytor.com> wrote:
> > Avuton Olrich wrote:
> >>
> >> Hello,
> >>
> >> My computer fails to make it past 'Unpacking kernel' with anything
> >> later than dc1e35, to at least v2.6.29-rc2 due to dc1e35c, at least so
> >> git bisect told me. While writing this bug I discovered I was using
> >> gcc-4.1.1 when I thought I was using gcc-4.3.2; I upgraded, recompiled
> >> 2.6.28.1 and same results so I assume the same results would come from
> >> me doing the 4 hour bisect again.
> >>
> >
> > Hi Avuton,
> >
> > Could you apply these two patches and verify that they work, even with the
> > BIOS CPUID level limit enabled?
> 
> Worked perfect, again thanks!

Thanks Avuton - i've updated the commit with your Tested-by tag, see the 
final commit below.

	Ingo

--------------------->
>From 066941bd4eeb159307a5d7d795100d0887c00442 Mon Sep 17 00:00:00 2001
From: H. Peter Anvin <hpa@linux.intel.com>
Date: Wed, 21 Jan 2009 15:04:32 -0800
Subject: [PATCH] x86: unmask CPUID levels on Intel CPUs

Impact: Fixes crashes with misconfigured BIOSes on XSAVE hardware

Avuton Olrich reported early boot crashes with v2.6.28 and
bisected it down to dc1e35c6e95e8923cf1d3510438b63c600fee1e2
("x86, xsave: enable xsave/xrstor on cpus with xsave support").

If the CPUID limit bit in MSR_IA32_MISC_ENABLE is set, clear it to
make all CPUID information available.  This is required for some
features to work, in particular XSAVE.

Reported-and-bisected-by: Avuton Olrich <avuton@gmail.com>
Tested-by: Avuton Olrich <avuton@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
---
 arch/x86/kernel/cpu/intel.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 8ea6929..43c1dcf 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -29,6 +29,16 @@
 
 static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
 {
+	u64 misc_enable;
+
+	/* Unmask CPUID levels if masked */
+	if (!rdmsrl_safe(MSR_IA32_MISC_ENABLE, &misc_enable) &&
+	    (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID)) {
+		misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID;
+		wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable);
+		c->cpuid_level = cpuid_eax(0);
+	}
+
 	if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
 		(c->x86 == 0x6 && c->x86_model >= 0x0e))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);

      reply	other threads:[~2009-01-22  8:28 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-19 14:04 Fail to early boot with v2.6.27-rc2 to at least v2.6.29-rc2 due to dc1e35c Avuton Olrich
2009-01-19 14:28 ` Avuton Olrich
2009-01-19 18:55 ` H. Peter Anvin
2009-01-19 19:31   ` Avuton Olrich
2009-01-19 20:07     ` H. Peter Anvin
2009-01-19 20:11       ` Suresh Siddha
2009-01-19 21:46         ` Avuton Olrich
2009-01-19 21:57           ` Suresh Siddha
2009-01-19 22:07             ` H. Peter Anvin
2009-01-19 22:14               ` Suresh Siddha
2009-01-19 22:24                 ` H. Peter Anvin
2009-01-21  5:20               ` Andi Kleen
2009-01-22 22:22                 ` Suresh Siddha
2009-01-22 22:40                   ` H. Peter Anvin
2009-01-22 22:56                     ` Suresh Siddha
2009-01-20  3:35             ` Valdis.Kletnieks
2009-01-20  6:36               ` H. Peter Anvin
2009-01-22  0:38 ` H. Peter Anvin
2009-01-22  2:26   ` Avuton Olrich
2009-01-22  8:28     ` Ingo Molnar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090122082801.GA10012@elte.hu \
    --to=mingo@elte.hu \
    --cc=avuton@gmail.com \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox