From: Philipp Matthias Hahn <pmhahn@titan.lahn.de>
To: Kernel Mailing List <linux-kernel@vger.kernel.org>,
Yinghai Lu <yhlu.kernel@gmail.com>,
Tobias Diedrich <ranma+kernel@tdiedrich.de>,
Ayaz Abdulla <aabdulla@nvidia.com>, Jeff Garzik <jeff@garzik.org>,
"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: WOL with forcedeth broken since f55c21fd9a92a444e55ad1ca4e4732d56661bf2e
Date: Thu, 29 Jan 2009 07:31:18 +0100 [thread overview]
Message-ID: <20090129063118.GA3586@pmhahn.de> (raw)
Hello!
Somewhere between 2.6.26 and 2.6.27 WOL stopped working on my MS-7350
motherboard with an "nVidia Corporation MCP51 Ethernet Controller (rev a3)".
"etherwake 00:19:db:f2:e1:35" did not work
"etherwake 35:e1:f2:db:19:00" did work
Since I did a BIOS update during the same time window I (wrongly) put
the fault on the BIOS. (See /sys/class/dmi/id/modalias for yourself:
dmi:bvnAmericanMegatrendsInc.:bvrV1.7:bd07/29/2008:svnMSI:pnMS-7350:pvr1.0:rvnMSI:rnMS-7350:rvr1.0:cvnToBeFilledByO.E.M.:ct3:cvrToBeFilledByO.E.M.:
)
Today I finally found the time to test various old versions of
"drivers/net/forcedeth.c" and also did a "git-bisect v2.6.26 v2.6.27"
which lead to the following culprit:
f55c21fd9a92a444e55ad1ca4e4732d56661bf2e is first bad commit
commit f55c21fd9a92a444e55ad1ca4e4732d56661bf2e
Author: Yinghai Lu <yhlu.kernel@gmail.com>
Date: Sat Sep 13 13:10:31 2008 -0700
forcedeth: call restore mac addr in nv_shutdown path
after
| commit f735a2a1a4f2a0f5cd823ce323e82675990469e2
| Author: Tobias Diedrich <ranma+kernel@tdiedrich.de>
| Date: Sun May 18 15:02:37 2008 +0200
|
| [netdrvr] forcedeth: setup wake-on-lan before shutting down
|
| When hibernating in 'shutdown' mode, after saving the image the suspend hook
| is not called again.
| However, if the device is in promiscous mode, wake-on-lan will not work.
| This adds a shutdown hook to setup wake-on-lan before the final shutdown.
|
| Signed-off-by: Tobias Diedrich <ranma+kernel@tdiedrich.de>
| Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
my servers with nvidia ck804 and mcp55 will reverse mac address with kexec.
it turns out that we need to restore the mac addr in nv_shutdown().
[akpm@linux-foundation.org: fix typo in printk]
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Tobias Diedrich <ranma+kernel@tdiedrich.de>
Cc: Ayaz Abdulla <aabdulla@nvidia.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 0b6ecef..eeb55ed 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -5643,6 +5643,7 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
dev->dev_addr[4] = (np->orig_mac[0] >> 8) & 0xff;
dev->dev_addr[5] = (np->orig_mac[0] >> 0) & 0xff;
writel(txreg|NVREG_TRANSMITPOLL_MAC_ADDR_REV, base + NvRegTransmitPoll);
+ printk(KERN_DEBUG "nv_probe: set workaround bit for reversed mac addr\n");
}
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
@@ -5890,14 +5891,12 @@ static void nv_restore_phy(struct net_device *dev)
}
}
-static void __devexit nv_remove(struct pci_dev *pci_dev)
+static void nv_restore_mac_addr(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- unregister_netdev(dev);
-
/* special op: write back the misordered MAC address - otherwise
* the next nv_probe would see a wrong address.
*/
@@ -5905,6 +5904,15 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
writel(np->orig_mac[1], base + NvRegMacAddrB);
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
base + NvRegTransmitPoll);
+}
+
+static void __devexit nv_remove(struct pci_dev *pci_dev)
+{
+ struct net_device *dev = pci_get_drvdata(pci_dev);
+
+ unregister_netdev(dev);
+
+ nv_restore_mac_addr(pci_dev);
/* restore any phy related changes */
nv_restore_phy(dev);
@@ -5975,6 +5983,8 @@ static void nv_shutdown(struct pci_dev *pdev)
if (netif_running(dev))
nv_close(dev);
+ nv_restore_mac_addr(pdev);
+
pci_disable_device(pdev);
if (system_state == SYSTEM_POWER_OFF) {
if (pci_enable_wake(pdev, PCI_D3cold, np->wolenabled))
:040000 040000 8c603aa1f71b79f3f4a94bef066a830a249c8d2a e85d84f3c509421a33fd4b71bacddeb4b9fbe896 M drivers
Reverting that patch on top of drivers/net/forcedeth.c from 2.6.28.2
resolves the problem for me.
I DON'T use kexec, just simple poweroff.
BYtE
Philipp
--
/ / (_)__ __ ____ __ Philipp Hahn
/ /__/ / _ \/ // /\ \/ /
/____/_/_//_/\_,_/ /_/\_\ pmhahn@titan.lahn.de
next prev reply other threads:[~2009-01-29 6:58 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-04 10:55 2.6.29-rc3-git6: Reported regressions 2.6.27 -> 2.6.28 Rafael J. Wysocki
2009-01-29 6:31 ` Philipp Matthias Hahn [this message]
2009-01-30 6:53 ` WOL with forcedeth broken since f55c21fd9a92a444e55ad1ca4e4732d56661bf2e Yinghai Lu
2009-01-30 8:35 ` Yinghai Lu
2009-01-30 21:20 ` Rafael J. Wysocki
2009-02-05 23:23 ` Philipp Matthias Hahn
2009-02-05 23:35 ` Yinghai Lu
2009-02-06 5:33 ` Philipp Matthias Hahn
2009-02-06 6:59 ` Philipp Matthias Hahn
2009-02-07 8:34 ` Philipp Matthias Hahn
2009-02-06 0:13 ` Rafael J. Wysocki
2009-02-08 15:18 ` Tobias Diedrich
2009-02-08 16:52 ` Tobias Diedrich
2009-02-09 7:28 ` Philipp Matthias Hahn
2009-02-04 10:56 ` [Bug #11849] default IRQ affinity change in v2.6.27 (breaking several SMP PPC based systems) Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12061] snd_hda_intel: power_save: sound cracks on powerdown Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12159] 2.6.28-rc6-git1 -- No sound produced from Intel HDA ALSA driver Rafael J. Wysocki
2009-02-04 13:37 ` Miles Lane
2009-02-05 1:29 ` Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12160] networking oops after resume from s2ram (2.6.28-rc6) Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12208] uml is very slow on 2.6.28 host Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12224] journal activity on inactive partition causes inactive harddrive spinup Rafael J. Wysocki
2009-02-05 2:00 ` Theodore Tso
2009-02-05 2:36 ` Andrew Morton
2009-02-04 10:58 ` [Bug #12209] oldish top core dumps (in its meminfo() function) Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12265] FPU emulation broken in 2.6.28-rc8 ? Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12264] i915: switching from kwin in opengl mode to a VT then back to x11, x11 freezes Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12263] Sata soft reset filling log Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12337] ~100 extra wakeups reported by powertop Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12391] Processor does not go below C2 state until usb.autosuspend is enabled Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12395] 2.6.28-rc9: oprofile regression Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12393] debugging in dosemu causes lots of 'scheduling while atomic' Rafael J. Wysocki
2009-02-05 2:44 ` Michal Suchanek
2009-02-05 16:09 ` Rafael J. Wysocki
2009-02-05 16:25 ` Ray Lee
2009-02-04 10:58 ` [Bug #12396] hwinfo problem since 2.6.28 Rafael J. Wysocki
2009-02-04 14:03 ` Beschorner Daniel
2009-02-05 1:32 ` Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12401] 2.6.28 regression: xbacklight broken on ThinkPad X61s Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12406] 2.6.28 thinks that my PS/2 mouse is a touchpad Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12403] TTY problem on linux-2.6.28-rc7 Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12405] oops in __bounce_end_io_read under kvm Rafael J. Wysocki
2009-02-06 8:13 ` Christoph Hellwig
2009-02-06 15:46 ` Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12404] Oops in 2.6.28-rc9 and -rc8 -- mtrr issues / e1000e Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12407] Kernel 2.6.28 regression: Hang after hibernate Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12408] Funny problem with 2.6.28: Kernel stalls Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12411] 2.6.28: BUG in r8169 Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12409] NULL pointer dereference at get_stats() Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12426] TMDC Joystick no longer works in kernel 2.6.28 Rafael J. Wysocki
2009-02-04 13:54 ` Jiri Kosina
2009-02-05 1:34 ` Rafael J. Wysocki
2009-02-06 14:09 ` Andrew S. Johnson
2009-02-06 15:11 ` Jiri Kosina
2009-02-04 10:58 ` [Bug #12465] KVM guests stalling on 2.6.28 (bisected) Rafael J. Wysocki
2009-02-05 19:35 ` Kevin Shanahan
2009-02-05 22:37 ` Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12500] r8169: NETDEV WATCHDOG: eth0 (r8169): transmit timed out Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12520] Cannot boot 2.6.28 under Dell OptiPlex 960 Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12559] Huawei E169 doesn't work as mass storage anymore Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12612] hard lockup when interrupting cdda2wav Rafael J. Wysocki
2009-02-05 13:16 ` Matthias Reichl
2009-02-05 16:10 ` Rafael J. Wysocki
2009-02-06 7:33 ` FUJITA Tomonori
2009-02-04 10:58 ` [Bug #12614] WOL with forcedeth broken since f55c21fd9a92a444e55ad1ca4e4732d56661bf2e Rafael J. Wysocki
2009-02-04 10:58 ` [Bug #12619] Regression 2.6.28 and last - boot failed Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090129063118.GA3586@pmhahn.de \
--to=pmhahn@titan.lahn.de \
--cc=aabdulla@nvidia.com \
--cc=jeff@garzik.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ranma+kernel@tdiedrich.de \
--cc=rjw@sisk.pl \
--cc=yhlu.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox