From: Rusty Russell <rusty@rustcorp.com.au>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, Eric Biederman <ebiederm@xmission.com>
Subject: [PATCH] modules: Use a better scheme for refcounting
Date: Tue, 3 Feb 2009 13:31:36 +1030 [thread overview]
Message-ID: <200902031331.36336.rusty@rustcorp.com.au> (raw)
From: Eric Dumazet <dada1@cosmosbay.com>
(Linus, please apply. This has become critical with NR_CPUS 4096: we
currently use an astonishing 1GB additional space for 2000 modules.)
Current refcounting for modules (done if CONFIG_MODULE_UNLOAD=y)
is using a lot of memory.
Each 'struct module' contains an [NR_CPUS] array of full cache lines.
This patch uses existing infrastructure (percpu_modalloc() &
percpu_modfree()) to allocate percpu space for the refcount storage.
Instead of wasting NR_CPUS*128 bytes (on i386), we now use
nr_cpu_ids*sizeof(local_t) bytes.
On a typical distro, where NR_CPUS=8, shiping 2000 modules, we reduce
size of module files by about 2 Mbytes. (1Kb per module)
Instead of having all refcounters in the same memory node - with TLB misses
because of vmalloc() - this new implementation permits to have better
NUMA properties, since each CPU will use storage on its preferred node,
thanks to percpu storage.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
---
include/linux/module.h | 25 ++++++++++++++++---------
kernel/module.c | 35 +++++++++++++++++++++++++----------
2 files changed, 41 insertions(+), 19 deletions(-)
diff --git a/include/linux/module.h b/include/linux/module.h
--- a/include/linux/module.h
+++ b/include/linux/module.h
@@ -219,11 +219,6 @@ void *__symbol_get_gpl(const char *symbo
#endif
-struct module_ref
-{
- local_t count;
-} ____cacheline_aligned;
-
enum module_state
{
MODULE_STATE_LIVE,
@@ -344,8 +339,11 @@ struct module
/* Destruction function. */
void (*exit)(void);
- /* Reference counts */
- struct module_ref ref[NR_CPUS];
+#ifdef CONFIG_SMP
+ char *refptr;
+#else
+ local_t ref;
+#endif
#endif
};
#ifndef MODULE_ARCH_INIT
@@ -395,13 +393,22 @@ void __symbol_put(const char *symbol);
#define symbol_put(x) __symbol_put(MODULE_SYMBOL_PREFIX #x)
void symbol_put_addr(void *addr);
+static inline local_t *__module_ref_addr(struct module *mod, int cpu)
+{
+#ifdef CONFIG_SMP
+ return (local_t *) (mod->refptr + per_cpu_offset(cpu));
+#else
+ return &mod->ref;
+#endif
+}
+
/* Sometimes we know we already have a refcount, and it's easier not
to handle the error case (which only happens with rmmod --wait). */
static inline void __module_get(struct module *module)
{
if (module) {
BUG_ON(module_refcount(module) == 0);
- local_inc(&module->ref[get_cpu()].count);
+ local_inc(__module_ref_addr(module, get_cpu()));
put_cpu();
}
}
@@ -413,7 +420,7 @@ static inline int try_module_get(struct
if (module) {
unsigned int cpu = get_cpu();
if (likely(module_is_live(module)))
- local_inc(&module->ref[cpu].count);
+ local_inc(__module_ref_addr(module, cpu));
else
ret = 0;
put_cpu();
diff --git a/kernel/module.c b/kernel/module.c
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -573,13 +573,13 @@ static char last_unloaded_module[MODULE_
/* Init the unload section of the module. */
static void module_unload_init(struct module *mod)
{
- unsigned int i;
+ int cpu;
INIT_LIST_HEAD(&mod->modules_which_use_me);
- for (i = 0; i < NR_CPUS; i++)
- local_set(&mod->ref[i].count, 0);
+ for_each_possible_cpu(cpu)
+ local_set(__module_ref_addr(mod, cpu), 0);
/* Hold reference count during initialization. */
- local_set(&mod->ref[raw_smp_processor_id()].count, 1);
+ local_set(__module_ref_addr(mod, raw_smp_processor_id()), 1);
/* Backwards compatibility macros put refcount during init. */
mod->waiter = current;
}
@@ -717,10 +717,11 @@ static int try_stop_module(struct module
unsigned int module_refcount(struct module *mod)
{
- unsigned int i, total = 0;
+ unsigned int total = 0;
+ int cpu;
- for (i = 0; i < NR_CPUS; i++)
- total += local_read(&mod->ref[i].count);
+ for_each_possible_cpu(cpu)
+ total += local_read(__module_ref_addr(mod, cpu));
return total;
}
EXPORT_SYMBOL(module_refcount);
@@ -894,7 +895,7 @@ void module_put(struct module *module)
{
if (module) {
unsigned int cpu = get_cpu();
- local_dec(&module->ref[cpu].count);
+ local_dec(__module_ref_addr(module, cpu));
/* Maybe they're waiting for us to drop reference? */
if (unlikely(!module_is_live(module)))
wake_up_process(module->waiter);
@@ -1464,7 +1465,10 @@ static void free_module(struct module *m
kfree(mod->args);
if (mod->percpu)
percpu_modfree(mod->percpu);
-
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+ if (mod->refptr)
+ percpu_modfree(mod->refptr);
+#endif
/* Free lock-classes: */
lockdep_free_key_range(mod->module_core, mod->core_size);
@@ -2011,6 +2015,14 @@ static noinline struct module *load_modu
if (err < 0)
goto free_mod;
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+ mod->refptr = percpu_modalloc(sizeof(local_t), __alignof__(local_t),
+ mod->name);
+ if (!mod->refptr) {
+ err = -ENOMEM;
+ goto free_mod;
+ }
+#endif
if (pcpuindex) {
/* We have a special allocation for this section. */
percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
@@ -2018,7 +2030,7 @@ static noinline struct module *load_modu
mod->name);
if (!percpu) {
err = -ENOMEM;
- goto free_mod;
+ goto free_percpu;
}
sechdrs[pcpuindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
mod->percpu = percpu;
@@ -2282,6 +2294,9 @@ static noinline struct module *load_modu
free_percpu:
if (percpu)
percpu_modfree(percpu);
+#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
+ percpu_modfree(mod->refptr);
+#endif
free_mod:
kfree(args);
free_hdr:
next reply other threads:[~2009-02-03 3:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-03 3:01 Rusty Russell [this message]
-- strict thread matches above, loose matches on Subject: below --
2008-05-15 20:40 [PATCH] modules: Use a better scheme for refcounting Eric Dumazet
2008-05-15 21:57 ` Andi Kleen
2008-05-16 4:44 ` Eric Dumazet
2008-05-16 0:09 ` Rusty Russell
2008-05-16 5:29 ` Eric Dumazet
2008-05-16 13:41 ` Mike Travis
2008-05-17 5:33 ` Rusty Russell
2008-05-17 7:36 ` Eric Dumazet
2008-05-18 14:31 ` Rusty Russell
2008-05-19 16:42 ` Christoph Lameter
2008-05-19 16:41 ` Christoph Lameter
2008-05-19 18:04 ` Mike Travis
2008-05-19 16:39 ` Christoph Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200902031331.36336.rusty@rustcorp.com.au \
--to=rusty@rustcorp.com.au \
--cc=ebiederm@xmission.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox