From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: linux-ide@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/9] ide: add ide_end_rq()
Date: Mon, 09 Feb 2009 21:00:57 +0100 [thread overview]
Message-ID: <20090209200057.7985.71084.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090209200042.7985.94247.sendpatchset@localhost.localdomain>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] ide: add ide_end_rq()
* Move request dequeuing from __ide_end_request() to ide_end_request().
* Rename __ide_end_request() to ide_end_rq() and export it.
* Fix ide_end_rq() to pass original blk_end_request() return value.
* ide_end_dequeued_request() is used only in cdrom_end_request()
so inline it there and then remove the function.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/ide/ide-cd.c | 6 ++++--
drivers/ide/ide-io.c | 45 ++++++++++-----------------------------------
include/linux/ide.h | 2 +-
3 files changed, 15 insertions(+), 38 deletions(-)
Index: b/drivers/ide/ide-cd.c
===================================================================
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -264,8 +264,10 @@ static void cdrom_end_request(ide_drive_
* now end the failed request
*/
if (blk_fs_request(failed)) {
- if (ide_end_dequeued_request(drive, failed, 0,
- failed->hard_nr_sectors))
+ BUG_ON(!blk_rq_started(rq));
+
+ if (ide_end_rq(drive, failed, 0,
+ failed->hard_nr_sectors << 9))
BUG();
} else {
if (blk_end_request(failed, -EIO,
Index: b/drivers/ide/ide-io.c
===================================================================
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -54,10 +54,9 @@
#include <asm/uaccess.h>
#include <asm/io.h>
-static int __ide_end_request(ide_drive_t *drive, struct request *rq,
- int uptodate, unsigned int nr_bytes, int dequeue)
+int ide_end_rq(ide_drive_t *drive, struct request *rq, int uptodate,
+ unsigned int nr_bytes)
{
- int ret = 1;
int error = 0;
if (uptodate <= 0)
@@ -83,14 +82,9 @@ static int __ide_end_request(ide_drive_t
ide_dma_on(drive);
}
- if (!blk_end_request(rq, error, nr_bytes))
- ret = 0;
-
- if (ret == 0 && dequeue)
- drive->hwif->rq = NULL;
-
- return ret;
+ return blk_end_request(rq, error, nr_bytes);
}
+EXPORT_SYMBOL_GPL(ide_end_rq);
/**
* ide_end_request - complete an IDE I/O
@@ -107,6 +101,7 @@ int ide_end_request (ide_drive_t *drive,
{
unsigned int nr_bytes = nr_sectors << 9;
struct request *rq = drive->hwif->rq;
+ int rc;
if (!nr_bytes) {
if (blk_pc_request(rq))
@@ -115,33 +110,13 @@ int ide_end_request (ide_drive_t *drive,
nr_bytes = rq->hard_cur_sectors << 9;
}
- return __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
-}
-EXPORT_SYMBOL(ide_end_request);
-
-/**
- * ide_end_dequeued_request - complete an IDE I/O
- * @drive: IDE device for the I/O
- * @uptodate:
- * @nr_sectors: number of sectors completed
- *
- * Complete an I/O that is no longer on the request queue. This
- * typically occurs when we pull the request and issue a REQUEST_SENSE.
- * We must still finish the old request but we must not tamper with the
- * queue in the meantime.
- *
- * NOTE: This path does not handle barrier, but barrier is not supported
- * on ide-cd anyway.
- */
-
-int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
- int uptodate, int nr_sectors)
-{
- BUG_ON(!blk_rq_started(rq));
+ rc = ide_end_rq(drive, rq, uptodate, nr_bytes);
+ if (rc == 0)
+ drive->hwif->rq = NULL;
- return __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
+ return rc;
}
-EXPORT_SYMBOL_GPL(ide_end_dequeued_request);
+EXPORT_SYMBOL(ide_end_request);
void ide_complete_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat, u8 err)
{
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1128,8 +1128,8 @@ int generic_ide_ioctl(ide_drive_t *, str
extern int ide_vlb_clk;
extern int ide_pci_clk;
+int ide_end_rq(ide_drive_t *, struct request *, int, unsigned int);
int ide_end_request(ide_drive_t *, int, int);
-int ide_end_dequeued_request(ide_drive_t *, struct request *, int, int);
void ide_kill_rq(ide_drive_t *, struct request *);
void __ide_set_handler(ide_drive_t *, ide_handler_t *, unsigned int,
next prev parent reply other threads:[~2009-02-09 20:00 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-09 20:00 [PATCH 0/9] ide: unify request completion methods Bartlomiej Zolnierkiewicz
2009-02-09 20:00 ` [PATCH 1/9] ide: make ide_special_rq() BUG() on unknown requests Bartlomiej Zolnierkiewicz
2009-02-09 20:00 ` Bartlomiej Zolnierkiewicz [this message]
2009-02-09 20:01 ` [PATCH 3/9] ide: sanitize ide_end_rq() Bartlomiej Zolnierkiewicz
2009-02-09 20:01 ` [PATCH 4/9] ide: pass error value to ide_complete_rq() Bartlomiej Zolnierkiewicz
2009-02-09 20:01 ` [PATCH 5/9] ide: move rq->errors quirk out from ide_end_request() Bartlomiej Zolnierkiewicz
2009-02-09 20:01 ` [PATCH 6/9] ide: remove BUG() from ide_complete_rq() Bartlomiej Zolnierkiewicz
2009-02-09 20:01 ` [PATCH 7/9] ide: pass number of bytes to complete to ide_complete_rq() Bartlomiej Zolnierkiewicz
2009-02-09 20:01 ` [PATCH 8/9] ide: use ide_end_rq() in ide_complete_rq() Bartlomiej Zolnierkiewicz
2009-02-09 20:01 ` [PATCH 9/9] ide: remove ide_end_request() Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090209200057.7985.71084.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox