From: Andrew Morton <akpm@linux-foundation.org>
To: david@lang.hm
Cc: Matthew Wilcox <matthew@wil.cx>, Yinghai Lu <yinghai@kernel.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-scsi@vger.kernel.org, DL-MPTFusionLinux@lsi.com,
linux-pci@vger.kernel.org
Subject: Re: [PATCH] pci: enable MSI on 8132
Date: Wed, 18 Feb 2009 10:04:48 -0800 [thread overview]
Message-ID: <20090218100448.7f7c5b86.akpm@linux-foundation.org> (raw)
In-Reply-To: <alpine.DEB.1.10.0902180426420.25606@asgard.lang.hm>
On Wed, 18 Feb 2009 04:27:28 -0800 (PST) david@lang.hm wrote:
> On Wed, 18 Feb 2009, Matthew Wilcox wrote:
>
> > On Tue, Feb 17, 2009 at 08:40:09PM -0800, Yinghai Lu wrote:
> >>
> >> Impact: workaround BIOS that doesn't enable that bit
> >>
> >> David reported that LSI sas doesn't work with MSI.
> >> it turns out that BIOS doesn't enable HT MSI
> >> 8132 does support HT MSI.
> >> add quirk to enable it
> >>
> >> Reported-by: David Lang <david@lang.hm>
> >> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> >
> > Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
> >
> > Jesse, I think this should go into Linus' tree sooner rather than later.
>
> please forward to -stable as well. this is a regression since the card
> works with older kernels.
>
Which kernel version introduced the regression?
Do we not need mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch as
well, to fix this regression?
I sent mpt-fix-enable-lsi-sas-to-use-msi-as-default.patch to the
maintainers a week ago and it was ignored, along with everything else.
If this happens again I shall merge it under my own cognisance, along
with everything else.
next prev parent reply other threads:[~2009-02-18 18:05 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-17 22:24 mpt fusion broken sometime since 2.6.24 david
2009-02-17 21:44 ` david
2009-02-17 23:00 ` Matthew Wilcox
2009-02-17 23:07 ` david
2009-02-17 23:11 ` Matthew Wilcox
2009-02-17 23:20 ` Yinghai Lu
2009-02-17 23:21 ` david
2009-02-17 23:11 ` Yinghai Lu
2009-02-17 23:20 ` david
2009-02-17 23:22 ` Yinghai Lu
2009-02-17 23:37 ` david
2009-02-18 2:01 ` Yinghai Lu
2009-02-18 2:03 ` david
2009-02-18 2:14 ` Yinghai Lu
2009-02-18 2:32 ` david
2009-02-18 2:28 ` Yinghai Lu
2009-02-18 2:34 ` david
2009-02-18 2:40 ` david
2009-02-18 2:49 ` Yinghai Lu
2009-02-18 3:26 ` david
2009-02-18 3:28 ` Yinghai Lu
2009-02-18 3:35 ` david
2009-02-18 3:45 ` david
2009-02-18 3:47 ` Yinghai Lu
2009-02-18 4:14 ` david
2009-02-18 4:36 ` Yinghai Lu
2009-02-18 5:06 ` Yinghai Lu
2009-02-18 5:10 ` Yinghai Lu
2009-02-18 4:40 ` [PATCH] pci: enable MSI on 8132 Yinghai Lu
2009-02-18 12:21 ` Matthew Wilcox
2009-02-18 12:27 ` david
2009-02-18 18:04 ` Andrew Morton [this message]
2009-02-18 18:18 ` david
2009-02-18 18:32 ` Greg KH
2009-02-18 18:38 ` James Bottomley
2009-02-18 18:40 ` david
2009-02-18 19:08 ` Yinghai Lu
2009-02-18 19:14 ` James Bottomley
2009-02-18 19:25 ` Yinghai Lu
2009-02-18 20:12 ` Jeff Garzik
2009-02-18 20:18 ` James Bottomley
2009-02-18 19:15 ` Andrew Morton
2009-02-18 19:29 ` Yinghai Lu
2009-02-18 19:33 ` James Bottomley
2009-02-19 4:21 ` Prakash, Sathya
2009-02-18 19:00 ` Jesse Barnes
2009-02-19 3:39 ` Robert Hancock
2009-02-21 7:50 ` Eric W. Biederman
2009-02-21 8:31 ` Yinghai Lu
2009-02-21 8:58 ` Eric W. Biederman
2009-02-21 10:23 ` Yinghai Lu
2009-02-21 18:59 ` Robert Hancock
2009-02-22 12:08 ` Prakash Punnoor
2009-02-22 12:54 ` Eric W. Biederman
2009-02-22 15:17 ` Prakash Punnoor
2009-02-22 21:45 ` Yinghai Lu
2009-02-22 22:07 ` Yinghai Lu
2009-02-23 6:18 ` Yinghai Lu
2009-02-23 18:21 ` Prakash Punnoor
2009-02-23 18:50 ` Yinghai Lu
2009-02-23 19:01 ` Prakash Punnoor
2009-02-23 19:51 ` [PATCH] pci: don't enable too many HT MSI mapping Yinghai Lu
2009-02-24 17:37 ` Jesse Barnes
2009-02-27 6:52 ` Prakash Punnoor
2009-02-27 20:59 ` Yinghai Lu
2009-02-28 8:25 ` Prakash Punnoor
2009-02-28 20:57 ` Yinghai Lu
2009-02-28 22:43 ` Yinghai Lu
2009-03-01 7:50 ` Prakash Punnoor
2009-03-01 7:58 ` Prakash Punnoor
2009-03-01 8:12 ` Yinghai Lu
2009-03-01 8:29 ` Prakash Punnoor
2009-03-04 7:15 ` Prakash Punnoor
2009-03-04 8:21 ` Yinghai Lu
2009-03-05 17:01 ` Matthew Wilcox
2009-03-05 17:15 ` Matthew Wilcox
2009-03-05 23:26 ` Yinghai Lu
2009-03-05 23:45 ` Prakash Punnoor
2009-03-06 1:10 ` Matthew Wilcox
2009-03-06 4:15 ` Yinghai Lu
2009-03-06 9:10 ` Prakash Punnoor
2009-03-21 2:29 ` [PATCH] pci: don't enable too much HT MSI mapping -v5 -resend Yinghai Lu
2009-03-26 23:10 ` Jesse Barnes
2009-03-28 12:34 ` Prakash Punnoor
2009-03-28 13:31 ` Prakash Punnoor
2009-03-28 20:18 ` Yinghai Lu
2009-03-28 22:11 ` Prakash Punnoor
2009-03-28 20:52 ` Yinghai Lu
2009-03-28 22:16 ` Prakash Punnoor
2009-03-28 23:15 ` Yinghai Lu
2009-03-29 1:33 ` Yinghai Lu
2009-03-29 9:15 ` Prakash Punnoor
2009-03-29 9:32 ` Yinghai Lu
2009-03-29 12:50 ` Prakash Punnoor
2009-03-29 19:27 ` Yinghai Lu
2009-03-29 19:30 ` [PATCH] pci: don't enable too much HT MSI mapping -v6 Yinghai Lu
2009-03-30 19:17 ` Jesse Barnes
2009-02-22 23:42 ` [PATCH] pci: enable MSI on 8132 Matthew Wilcox
2009-02-22 3:42 ` Grant Grundler
2009-02-18 3:12 ` mpt fusion broken sometime since 2.6.24 david
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090218100448.7f7c5b86.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=DL-MPTFusionLinux@lsi.com \
--cc=david@lang.hm \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=matthew@wil.cx \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox