From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Tomasz Chmielewski <mangoo@wpkg.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
dri-devel@lists.sourceforge.net,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: Initialized radeon -> Oops: 0000 [#1] SMP
Date: Sat, 7 Mar 2009 22:16:32 +0100 [thread overview]
Message-ID: <200903072216.33271.rjw@sisk.pl> (raw)
In-Reply-To: <49B1754C.50109@wpkg.org>
On Friday 06 March 2009, Tomasz Chmielewski wrote:
> Don't really know where one should send Oops... Is there a better place than linux-kernel?
dri-devel@lists.sourceforge.net for one example (CCed).
Is this a regression and if so, then what's the last good kernel?
> First time I see such an oops on this multiseat system. Everything still works fine though.
>
> pci 0000:02:05.0: enabling device (0000 -> 0003)
> pci 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [drm] Initialized drm 1.1.0 20060810
> pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [drm] Initialized radeon 1.29.0 20080528 on minor 0
> BUG: unable to handle kernel NULL pointer dereference at 00000320
> IP: [<f864709c>] dri_library_name+0xc/0x50 [radeon]
> *pde = 00000000
> Oops: 0000 [#1] SMP
> last sysfs file: /sys/class/drm/card1/dri_library_name
> Modules linked in: radeon(+) drm uhci_hcd mt2060 ehci_hcd fuse af_packet ipv6 binfmt_misc loop dm_mirror dm_region_hash dm_log dm_mod cpufreq_ondemand cpufreq_conservative cpufreq_powersave p4_clockmod speedstep_lib freq_table joydev usbhid hid snd_intel8x0 snd_ac97_codec ac97_bus snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device dvb_usb_dibusb_mc dvb_usb_dibusb_common snd_pcm_oss dib3000mc dibx000_common snd_pcm dvb_usb dvb_core snd_timer rng_core snd_mixer_oss snd r8169 soundcore mii intel_agp agpgart i2c_i801 i2c_core shpchp snd_page_alloc iTCO_wdt iTCO_vendor_support pci_hotplug thermal sg processor sr_mod button rtc_cmos evdev usbcore ata_generic ide_pci_generic pata_acpi piix ide_gd_mod ide_core ahci ata_piix libatasd_mod scsi_mod crc_t10dif ext4 jbd2 crc16 [last unloaded: ehci_hcd]
>
> Pid: 2973, comm: hald Not tainted (2.6.29-0.rc7.1mdv #1) MS-6728
> EIP: 0060:[<f864709c>] EFLAGS: 00010286 CPU: 0
> EIP is at dri_library_name+0xc/0x50 [radeon]
> EAX: 00000000 EBX: f4c77000 ECX: f8647090 EDX: f4c77000
> ESI: f84d4ac0 EDI: f84bf5c0 EBP: f623df0c ESP: f623defc
> DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
> Process hald (pid: 2973, ti=f623c000 task=f6043040 task.ti=f623c000)
> Stack:
> 000280d0 00000001 00000010 00000001 f623df28 f84bf5e0 c04bc484 000b8097
> 00000000 f4c523c0 fffffffb f623df3c c02b21d4 c04af980 f68fc780 f4c52570
> f623df6c c01f4bdd f623df6c c01a6088 00001000 b8097000 f68fc794 c04af980
> Call Trace:
> [<f84bf5e0>] ? show_dri+0x20/0x50 [drm]
> [<c02b21d4>] ? dev_attr_show+0x24/0x50
> [<c01f4bdd>] ? sysfs_read_file+0x7d/0x110
> [<c01a6088>] ? rw_verify_area+0x48/0xc0
> [<c01a67e9>] ? vfs_read+0x99/0x160
> [<c01f4b60>] ? sysfs_read_file+0x0/0x110
> [<c01a696d>] ? sys_read+0x3d/0x70
> [<c0103eeb>] ? sysenter_do_call+0x12/0x2f
> Code: 08 01 00 00 8b 40 10 83 c0 40 89 10 31 c0 5d c3 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 90 55 89 e5 83 ec 10 8b 80 2c 02 00 00 <0f> b7 88 20 03 00 00 b8 c8 de 65 f8 83 f9 04 7e 0a 83 f9 08 b8
> EIP: [<f864709c>] dri_library_name+0xc/0x50 [radeon] SS:ESP 0068:f623defc
> ---[ end trace 64a71e320bae00a0 ]---
> [drm] Initialized radeon 1.29.0 20080528 on minor 1
> [drm] Setting GART location based on new memory map
> [drm] Loading R200 Microcode
> [drm] writeback test succeeded in 2 usecs
> agpgart-intel 0000:00:00.0: AGP 3.0 bridge
> agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
> pci 0000:01:00.0: putting AGP V3 device into 8x mode
> [drm] Setting GART location based on new memory map
> [drm] Loading R300 Microcode
> [drm] Num pipes: 1
> [drm] writeback test succeeded in 1 usecs
>
>
> $ lspci
> 00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
> 00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
> 00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
> 00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
> 00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
> 00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600]
> 01:00.1 Display controller: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary)
> 02:05.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
> 02:05.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
> 02:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
>
>
> $ lspci -v (video cards only)
> 01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600] (prog-if 00 [VGA controller])
> Subsystem: ATI Technologies Inc RV350 AR [Radeon 9600]
> Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
> Memory at c0000000 (32-bit, prefetchable) [size=256M]
> I/O ports at a800 [size=256]
> Memory at ffcf0000 (32-bit, non-prefetchable) [size=64K]
> Expansion ROM at ffcc0000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel modules: radeonfb
>
> 01:00.1 Display controller: ATI Technologies Inc RV350 AR [Radeon 9600] (Secondary)
> Subsystem: ATI Technologies Inc Device 4153
> Flags: bus master, 66MHz, medium devsel, latency 32
> Memory at b0000000 (32-bit, prefetchable) [size=256M]
> Memory at ffce0000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
>
> 02:05.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA controller])
> Subsystem: Device 0001:0001
> Flags: bus master, medium devsel, latency 32, IRQ 17
> Memory at e4000000 (32-bit, prefetchable) [size=64M]
> I/O ports at b800 [size=256]
> Memory at ffde0000 (32-bit, non-prefetchable) [size=64K]
> Expansion ROM at dff00000 [disabled] [size=128K]
> Capabilities: <access denied>
> Kernel modules: radeonfb
>
> 02:05.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01)
> Subsystem: Device 0001:0000
> Flags: bus master, medium devsel, latency 32
> Memory at e8000000 (32-bit, prefetchable) [size=64M]
> Memory at ffdf0000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: <access denied>
>
> $ cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
> stepping : 1
> cpu MHz : 3000.000
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> apicid : 0
> initial apicid : 0
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl cid xtpr
> bogomips : 6000.67
> clflush size : 64
> power management:
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 15
> model : 4
> model name : Intel(R) Pentium(R) 4 CPU 3.00GHz
> stepping : 1
> cpu MHz : 3000.000
> cache size : 1024 KB
> physical id : 0
> siblings : 2
> core id : 0
> cpu cores : 1
> apicid : 1
> initial apicid : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2ss ht tm pbe constant_tsc pebs bts pni dtes64 monitor ds_cpl cid xtpr
> bogomips : 5999.17
> clflush size : 64
> power management:
next prev parent reply other threads:[~2009-03-07 21:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-06 19:11 Initialized radeon -> Oops: 0000 [#1] SMP Tomasz Chmielewski
2009-03-07 21:16 ` Rafael J. Wysocki [this message]
2009-03-07 23:13 ` Tomasz Chmielewski
2009-03-08 22:47 ` Tomasz Chmielewski
2009-03-07 23:22 ` Arjan van de Ven
2009-03-07 23:25 ` Tomasz Chmielewski
2009-03-07 23:41 ` Arjan van de Ven
2009-03-07 23:43 ` Dave Airlie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200903072216.33271.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=benh@kernel.crashing.org \
--cc=dri-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=mangoo@wpkg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox