From: Alex Chiang <achiang@hp.com>
To: jbarnes@virtuousgeek.org
Cc: shimada-yxb@necst.nec.co.jp, achiang@hp.com,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 00/12] PCI core learns hotplug
Date: Wed, 18 Mar 2009 16:39:25 -0600 [thread overview]
Message-ID: <20090318222426.887.1008.stgit@bob.kio> (raw)
We're getting close to the new merge window, and I _think_ this
patch series is ready for consideration. Notably:
- multiple rescans/removes of devices with and without bridges
- verified that resource allocation after multiple remove/rescan
cycles is the same as what we had during initial boot
- fixes the complete suckage of fakephp (that I created)
- doesn't affect existing hotplug drivers
- tested on x86 and ia64 platforms
Please review, and consider testing. For testing ease, you can pull
from my git branch:
git://git.kernel.org/pub/scm/linux/kernel/git/achiang/pci-hotplug.git
branch 'test-20090318' is what you want
Note, this test branch does contain the small assorted patches in AER
and the PCIe portdriver that I fixed along the way, but does not contain
the sysfs callback mutex that I introduced to protect myself from
Vegard Nossum. ;) If you want to hammer away at the sysfs interface,
please apply this patch on top:
http://thread.gmane.org/gmane.linux.kernel/806648
What I'm continuing to do:
- investigate converting existing hotplug drivers to use
new pci_rescan_bus() interface
Thanks.
/ac
v3 -> v4:
- protect sysfs interfaces with mutex
- undo changes in pci_do_scan_bus
- introduce pci_rescan_bus instead
- do not initialize bridges more than once
v2 -> v3:
- properly remove device with internal bridge
- added Kenji Kaneshige's pci_is_root_bus() interface
- dropped whitespace cleanups for another time
v1 -> v2:
- incorporated lots of Trent Piepho's work
- beefed up pci_do_scan_bus as heavy lifter for rescanning
- small bugfixes folded into earlier patches to get everything working
---
Alex Chiang (8):
PCI Hotplug: schedule fakephp for feature removal
PCI Hotplug: rename legacy_fakephp to fakephp
PCI: Introduce /sys/bus/pci/devices/.../rescan
PCI: Introduce /sys/bus/pci/devices/.../remove
PCI: Introduce /sys/bus/pci/rescan
PCI: Introduce pci_rescan_bus()
PCI: do not initialize bridges more than once
PCI: always scan child buses
Kenji Kaneshige (1):
PCI: pci_is_root_bus helper
Trent Piepho (3):
PCI Hotplug: restore fakephp interface with complete reimplementation
PCI: pci_scan_slot() returns newly found devices
PCI: don't scan existing devices
Documentation/ABI/testing/sysfs-bus-pci | 27 ++
Documentation/feature-removal-schedule.txt | 32 ++
Documentation/filesystems/sysfs-pci.txt | 10 +
drivers/pci/hotplug/fakephp.c | 443 +++++++---------------------
drivers/pci/pci-driver.c | 1
drivers/pci/pci-sysfs.c | 95 ++++++
drivers/pci/pci.h | 6
drivers/pci/probe.c | 103 ++++---
drivers/pci/setup-bus.c | 3
include/linux/pci.h | 12 +
10 files changed, 358 insertions(+), 374 deletions(-)
next reply other threads:[~2009-03-18 22:39 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-18 22:39 Alex Chiang [this message]
2009-03-18 22:39 ` [PATCH v4 01/12] PCI: pci_is_root_bus helper Alex Chiang
2009-03-18 22:39 ` [PATCH v4 02/12] PCI: don't scan existing devices Alex Chiang
2009-03-18 22:39 ` [PATCH v4 03/12] PCI: pci_scan_slot() returns newly found devices Alex Chiang
2009-03-18 22:39 ` [PATCH v4 04/12] PCI: always scan child buses Alex Chiang
2009-03-18 22:39 ` [PATCH v4 05/12] PCI: do not initialize bridges more than once Alex Chiang
2009-03-18 22:39 ` [PATCH v4 06/12] PCI: Introduce pci_rescan_bus() Alex Chiang
2009-03-19 9:27 ` Andrew Morton
2009-03-19 17:05 ` Alex Chiang
2009-03-19 17:42 ` Greg KH
2009-03-19 17:49 ` Alex Chiang
2009-03-19 18:09 ` Matthew Wilcox
2009-03-19 18:09 ` Greg KH
2009-03-19 9:29 ` Andrew Morton
2009-03-19 17:11 ` Alex Chiang
2009-03-18 22:40 ` [PATCH v4 07/12] PCI: Introduce /sys/bus/pci/rescan Alex Chiang
2009-03-19 9:34 ` Andrew Morton
2009-03-19 17:11 ` Alex Chiang
2009-03-19 22:55 ` Trent Piepho
2009-03-19 23:21 ` Alex Chiang
2009-03-18 22:40 ` [PATCH v4 08/12] PCI: Introduce /sys/bus/pci/devices/.../remove Alex Chiang
2009-03-19 9:43 ` Andrew Morton
2009-03-19 16:06 ` Greg KH
2009-03-19 16:30 ` Alex Chiang
2009-03-19 14:17 ` Kenji Kaneshige
2009-03-19 16:41 ` Alex Chiang
2009-03-19 20:43 ` Trent Piepho
2009-03-19 20:46 ` Alex Chiang
2009-03-19 23:19 ` Kenji Kaneshige
2009-03-20 3:53 ` Alex Chiang
2009-03-18 22:40 ` [PATCH v4 09/12] PCI: Introduce /sys/bus/pci/devices/.../rescan Alex Chiang
2009-03-18 22:40 ` [PATCH v4 10/12] PCI Hotplug: restore fakephp interface with complete reimplementation Alex Chiang
2009-03-19 9:45 ` Andrew Morton
2009-03-19 17:00 ` Alex Chiang
2009-03-19 19:24 ` Trent Piepho
2009-03-18 22:40 ` [PATCH v4 11/12] PCI Hotplug: rename legacy_fakephp to fakephp Alex Chiang
2009-03-18 22:40 ` [PATCH v4 12/12] PCI Hotplug: schedule fakephp for feature removal Alex Chiang
2009-03-19 8:12 ` [PATCH v4 00/12] PCI core learns hotplug Kenji Kaneshige
2009-03-19 17:07 ` Alex Chiang
2009-03-20 4:15 ` Alex Chiang
2009-03-19 14:09 ` Kenji Kaneshige
2009-03-19 17:13 ` Alex Chiang
2009-03-20 5:16 ` Alex Chiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090318222426.887.1008.stgit@bob.kio \
--to=achiang@hp.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=shimada-yxb@necst.nec.co.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox