From: Jean Delvare <khali@linux-fr.org>
To: Luca Tettamanti <kronos.it@gmail.com>
Cc: Hans de Goede <hdegoede@redhat.com>,
linux-kernel@vger.kernel.org, Matthew Garrett <mjg@redhat.com>,
Len Brown <lenb@kernel.org>, Thomas Renninger <trenn@suse.de>,
linux-acpi@vger.kernel.org, Pavel Machek <pavel@ucw.cz>
Subject: Re: [PATCH] ACPI: add "auto" to acpi_enforce_resources
Date: Mon, 30 Mar 2009 09:36:41 +0200 [thread overview]
Message-ID: <20090330093641.66bd520b@hyperion.delvare> (raw)
In-Reply-To: <20090329220127.GA12822@dreamland.darkstar.lan>
On Mon, 30 Mar 2009 00:01:27 +0200, Luca Tettamanti wrote:
> here's a revised patch:
> ---
>
> The following patch changes the default value for option "acpi_enforce_resource"
> to strict. It enforces strict resource checking - disallowing access by native
> drivers to IO ports and memory regions claimed by ACPI firmware.
>
> The patch is mainly aimed to block native hwmon drivers from touching
> monitoring chips that ACPI thinks it own.
>
> Signed-off-by: Luca Tettamanti <kronos.it@gmail.com>
Acked-by: Jean Delvare <jdelvare@suse.de>
> ---
> Documentation/kernel-parameters.txt | 16 ++++++++++++++++
> drivers/acpi/osl.c | 6 +++---
> 2 files changed, 19 insertions(+), 3 deletions(-)
>
> Index: b/Documentation/kernel-parameters.txt
> ===================================================================
> --- a/Documentation/kernel-parameters.txt 2009-03-29 23:58:11.574893074 +0200
> +++ b/Documentation/kernel-parameters.txt 2009-03-29 23:58:31.582894852 +0200
> @@ -259,6 +259,22 @@
> to assume that this machine's pmtimer latches its value
> and always returns good values.
>
> + acpi_enforce_resources= [ACPI]
> + { strict | lax | no }
> + Check for resource conflicts between native drivers
> + and ACPI OperationRegions (SystemIO and SystemMemory
> + only). IO ports and memory declared in ACPI might be
> + used by the ACPI subsystem in arbitrary AML code and
> + can interfere with legacy drivers.
> + strict (default): access to resources claimed by ACPI
> + is denied; legacy drivers trying to access reserved
> + resources will fail to bind to device using them.
> + lax: access to resources claimed by ACPI is allowed;
> + legacy drivers trying to access reserved resources
> + will bind successfully but a warning message is logged.
> + no: ACPI OperationRegions are not marked as reserved,
> + no further checks are performed.
> +
> agp= [AGP]
> { off | try_unsupported }
> off: disable AGP support
> Index: b/drivers/acpi/osl.c
> ===================================================================
> --- a/drivers/acpi/osl.c 2009-03-29 23:58:11.942913535 +0200
> +++ b/drivers/acpi/osl.c 2009-03-29 23:58:31.586892815 +0200
> @@ -1070,9 +1070,9 @@
> * in arbitrary AML code and can interfere with legacy drivers.
> * acpi_enforce_resources= can be set to:
> *
> - * - strict (2)
> + * - strict (default) (2)
> * -> further driver trying to access the resources will not load
> - * - lax (default) (1)
> + * - lax (1)
> * -> further driver trying to access the resources will load, but you
> * get a system message that something might go wrong...
> *
> @@ -1084,7 +1084,7 @@
> #define ENFORCE_RESOURCES_LAX 1
> #define ENFORCE_RESOURCES_NO 0
>
> -static unsigned int acpi_enforce_resources = ENFORCE_RESOURCES_LAX;
> +static unsigned int acpi_enforce_resources = ENFORCE_RESOURCES_STRICT;
>
> static int __init acpi_enforce_resources_setup(char *str)
> {
>
>
> Luca
--
Jean Delvare
next prev parent reply other threads:[~2009-03-30 7:37 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-25 21:05 [PATCH] ACPI: add "auto" to acpi_enforce_resources Luca Tettamanti
2009-01-26 8:37 ` Hans de Goede
2009-01-29 10:30 ` Thomas Renninger
2009-01-29 15:16 ` Luca Tettamanti
2009-01-29 16:29 ` Thomas Renninger
2009-01-29 18:58 ` Hans de Goede
2009-01-29 21:31 ` Jean Delvare
2009-01-30 14:29 ` Thomas Renninger
2009-02-01 21:22 ` Luca Tettamanti
2009-02-02 9:11 ` Jean Delvare
2009-02-02 11:38 ` Luca Tettamanti
2009-02-02 17:22 ` [PATCH 1/2] RFC: ACPI: Interface for ACPI drivers to place quirk code which gets executed early Thomas Renninger
2009-02-02 20:22 ` Luca Tettamanti
2009-02-03 13:08 ` Thomas Renninger
2009-02-03 13:45 ` Luca Tettamanti
2009-02-03 14:19 ` Jean Delvare
2009-02-04 13:37 ` Thomas Renninger
2009-02-02 17:22 ` [PATCH 2/2] RFC: ACPI: Set enforce_resources to strict if a ATK0110 device is found in namespace Thomas Renninger
2009-02-02 20:29 ` Luca Tettamanti
2009-02-02 11:38 ` [PATCH] ACPI: add "auto" to acpi_enforce_resources Thomas Renninger
2009-01-29 21:15 ` Luca Tettamanti
2009-02-04 5:52 ` Len Brown
2009-02-04 6:05 ` Matthew Garrett
2009-02-04 8:37 ` Hans de Goede
2009-02-04 13:17 ` Matthew Garrett
2009-02-04 13:26 ` Jean Delvare
2009-02-04 14:20 ` Matthew Garrett
2009-02-10 13:57 ` Jean Delvare
2009-02-10 14:08 ` Matthew Garrett
2009-02-10 15:32 ` Hans de Goede
2009-02-10 16:24 ` Jean Delvare
2009-02-27 13:27 ` Pavel Machek
2009-03-24 12:39 ` Luca Tettamanti
2009-03-24 13:21 ` Hans de Goede
2009-03-24 13:43 ` Jean Delvare
2009-03-24 14:29 ` Hans de Goede
2009-03-29 20:16 ` Luca Tettamanti
2009-03-29 20:33 ` Pavel Machek
2009-03-29 20:55 ` Jean Delvare
2009-03-29 22:01 ` Luca Tettamanti
2009-03-30 7:36 ` Jean Delvare [this message]
2009-04-02 22:59 ` Len Brown
2009-04-03 9:40 ` Jean Delvare
2009-02-12 12:44 ` Jean Delvare
2009-04-02 22:45 ` polling (Re: [PATCH] ACPI: add "auto" to acpi_enforce_resources) Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090330093641.66bd520b@hyperion.delvare \
--to=khali@linux-fr.org \
--cc=hdegoede@redhat.com \
--cc=kronos.it@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mjg@redhat.com \
--cc=pavel@ucw.cz \
--cc=trenn@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox