[PATCH 6/6] perf_counter: update mmap() counter read

[Peter Zijlstra <a.p.zijlstra@chello.nl>]

[-- Attachment #1: perf_counter-mmap_counter_read.patch --]
[-- Type: text/plain, Size: 2648 bytes --]

Paul noted that we don't need SMP barriers for the mmap() counter read
because its always on the same cpu (otherwise you can't access the hw
counter anyway).

So remove the SMP barriers and replace them with regular compiler
barriers.

Further, update the comment to include a race free method of readin
said hardware counter. The primary change is putting the pmc_read
inside the seq-loop, otherwise we can still race and read rubbish.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
---
 include/linux/perf_counter.h |   30 ++++++++++++++----------------
 kernel/perf_counter.c        |    4 ++--
 2 files changed, 16 insertions(+), 18 deletions(-)

Index: linux-2.6/include/linux/perf_counter.h
===================================================================
--- linux-2.6.orig/include/linux/perf_counter.h
+++ linux-2.6/include/linux/perf_counter.h
@@ -173,30 +173,28 @@ struct perf_counter_mmap_page {
 	/*
 	 * Bits needed to read the hw counters in user-space.
 	 *
-	 * The index and offset should be read atomically using the seqlock:
-	 *
-	 *   __u32 seq, index;
-	 *   __s64 offset;
-	 *
-	 * again:
-	 *   rmb();
-	 *   seq = pc->lock;
+	 *   u32 seq;
+	 *   s64 count;
 	 *
+	 * again:
+	 *   seq = pc->lock;
 	 *   if (unlikely(seq & 1)) {
 	 *     cpu_relax();
-	 *     goto again;
-	 *   }
+	 *     goto again;
+	 *   }
 	 *
-	 *   index = pc->index;
-	 *   offset = pc->offset;
+	 *   if (pc->index) {
+	 *     count = pmc_read(pc->index - 1);
+	 *     count += pc->offset;
+	 *   } else
+	 *     goto regular_read;
 	 *
-	 *   rmb();
+	 *   barrier();
 	 *   if (pc->lock != seq)
 	 *     goto again;
 	 *
-	 * After this, index contains architecture specific counter index + 1,
-	 * so that 0 means unavailable, offset contains the value to be added
-	 * to the result of the raw timer read to obtain this counter's value.
+	 * NOTE: for obvious reason this only works on self-monitoring
+	 *       processes.
 	 */
 	__u32	lock;			/* seqlock for synchronization */
 	__u32	index;			/* hardware counter identifier */
Index: linux-2.6/kernel/perf_counter.c
===================================================================
--- linux-2.6.orig/kernel/perf_counter.c
+++ linux-2.6/kernel/perf_counter.c
@@ -1340,13 +1340,13 @@ void perf_counter_update_userpage(struct
 	 */
 	preempt_disable();
 	++userpg->lock;
-	smp_wmb();
+	barrier();
 	userpg->index = counter->hw.idx;
 	userpg->offset = atomic64_read(&counter->count);
 	if (counter->state == PERF_COUNTER_STATE_ACTIVE)
 		userpg->offset -= atomic64_read(&counter->hw.prev_count);
 
-	smp_wmb();
+	barrier();
 	++userpg->lock;
 	preempt_enable();
 unlock:

--