Re: microcode driver newly spews warnings

[Ingo Molnar <mingo@elte.hu>]

(added Cc:s)

* Jeff Garzik <jeff@garzik.org> wrote:

> Jeff Garzik wrote:
>>
>> Kernel: 2.6.30-rc1-00306-g8371f87
>> Hardware: ICH10 x86-64
>>
>> This is a regression from 2.6.29.  Microcode spews the following 
>> WARNING multiple times during boot:
>>
>>> ------------[ cut here ]------------
>>> WARNING: at fs/sysfs/group.c:138 sysfs_remove_group+0xeb/0xf0()
>>> Hardware name:         sysfs group ffffffffa0209700 not found for  
>>> kobject 'cpu0'
>>> Modules linked in: microcode(-) kvm_intel kvm uinput sr_mod i2c_i801  
>>> cdrom i2c_c
>>> ore ata_generic sg firewire_ohci snd_hda_codec_realtek pata_marvell  
>>> snd_hda_inte
>>> l snd_hda_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc  
>>> e1000e ahci lib
>>> ata sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ehci_hcd [last  
>>> unloaded: scsi_w
>>> ait_scan]
>>> Pid: 2161, comm: rmmod Not tainted 2.6.30-rc1-00306-g8371f87 #1
>>> Call Trace:
>>>  [<ffffffff80241a2f>] warn_slowpath+0xaf/0x110
>>>  [<ffffffff80324046>] ? sysfs_addrm_finish+0x1a6/0x250
>>>  [<ffffffff802294d9>] ? __phys_addr+0x9/0x50
>>>  [<ffffffff802294d9>] ? __phys_addr+0x9/0x50
>>>  [<ffffffff8036c49d>] ? kobject_release+0x5d/0xa0
>>>  [<ffffffff802ba7c2>] ? __vunmap+0x12/0x110
>>>  [<ffffffff80325a8b>] sysfs_remove_group+0xeb/0xf0
>>>  [<ffffffffa0207468>] mc_sysdev_remove+0x38/0x50 [microcode]
>>>  [<ffffffff803fc2f8>] sysdev_driver_unregister+0x68/0xa0
>>>  [<ffffffffa0207eed>] microcode_exit+0x39/0x65 [microcode]
>>>  [<ffffffff8026c511>] sys_delete_module+0x191/0x250
>>>  [<ffffffff8020b5bb>] system_call_fastpath+0x16/0x1b
>>> ---[ end trace 0a72bfd99e89dde6 ]---
>>> ------------[ cut here ]------------
>>
>>
>> Full dmesg and lspci attached.
>
> Whoops, forgot kernel config.  Attached.
>
> 	Jeff
>
>
>