[PATCH 0/6] [GIT PULL] x86,ring_buffer,tracing: updates for tip

[PATCH 0/6] [GIT PULL] x86,ring_buffer,tracing: updates for tip

[Steven Rostedt]

Ingo,

Please pull the latest tip/tracing/ftrace-1 tree, which can be found at:

  git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
tip/tracing/ftrace-1


Chris Wright (1):
      x86: use native register access for native tlb flushing

Lai Jiangshan (1):
      ring_buffer: compressed event header

Steven Rostedt (4):
      tracing/wakeup: move access to wakeup_cpu into spinlock
      tracing: increase size of number of possible events
      tracing: add size checks for exported ftrace internal structures
      tracing: fix cut and paste macro error

----
 arch/x86/include/asm/tlbflush.h   |    8 ++--
 include/linux/ftrace_event.h      |    5 ++-
 include/linux/ring_buffer.h       |   16 ++++---
 include/trace/define_trace.h      |    8 ++--
 kernel/trace/ring_buffer.c        |   83 ++++++++++++++++++-------------------
 kernel/trace/trace_events.c       |    5 ++-
 kernel/trace/trace_export.c       |    4 ++
 kernel/trace/trace_output.c       |    2 +
 kernel/trace/trace_sched_wakeup.c |    6 +-
 9 files changed, 75 insertions(+), 62 deletions(-)
-- 

[PATCH 1/6] tracing/wakeup: move access to wakeup_cpu into spinlock

[Steven Rostedt]

[-- Attachment #1: 0001-tracing-wakeup-move-access-to-wakeup_cpu-into-spinl.patch --]
[-- Type: text/plain, Size: 1946 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

The code had the following outside the lock:

        if (next != wakeup_task)
                return;

        pc = preempt_count();

        /* The task we are waiting for is waking up */
        data = wakeup_trace->data[wakeup_cpu];

On initialization, wakeup_task is NULL and wakeup_cpu -1. This code
is not under a lock. If wakeup_task is set on another CPU as that
task is waking up, we can see the wakeup_task before wakeup_cpu is
set. If we read wakeup_cpu while it is still -1 then we will have
a bad data pointer.

This patch moves the reading of wakeup_cpu within the protection of
the spinlock used to protect the writing of wakeup_cpu and wakeup_task.

[ Impact: remove possible race causing invalid pointer dereference ]

Reported-by: Maneesh Soni <maneesh@in.ibm.com>
Signed-off-by: Steven Rostedt <srostedt@redhat.com>
---
 kernel/trace/trace_sched_wakeup.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c
index b8b13c5..eacb272 100644
--- a/kernel/trace/trace_sched_wakeup.c
+++ b/kernel/trace/trace_sched_wakeup.c
@@ -138,9 +138,6 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
 
 	pc = preempt_count();
 
-	/* The task we are waiting for is waking up */
-	data = wakeup_trace->data[wakeup_cpu];
-
 	/* disable local data, not wakeup_cpu data */
 	cpu = raw_smp_processor_id();
 	disabled = atomic_inc_return(&wakeup_trace->data[cpu]->disabled);
@@ -154,6 +151,9 @@ probe_wakeup_sched_switch(struct rq *rq, struct task_struct *prev,
 	if (unlikely(!tracer_enabled || next != wakeup_task))
 		goto out_unlock;
 
+	/* The task we are waiting for is waking up */
+	data = wakeup_trace->data[wakeup_cpu];
+
 	trace_function(wakeup_trace, CALLER_ADDR0, CALLER_ADDR1, flags, pc);
 	tracing_sched_switch_trace(wakeup_trace, prev, next, flags, pc);
 
-- 
1.6.2.1

-- 

[PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

[-- Attachment #1: 0002-tracing-increase-size-of-number-of-possible-events.patch --]
[-- Type: text/plain, Size: 2362 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

With the new event tracing registration, we must increase the number
of events that can be registered. Currently the type field is only
one byte, which leaves us only 256 possible events.

Since we do not save the CPU number in the tracer anymore (it is determined
by the per cpu ring buffer that is used) we have an extra byte to use.

This patch increases the size of type from 1 byte (256 events) to
2 bytes (65,536 events).

It also adds a WARN_ON_ONCE if we exceed that limit.

[ Impact: allow more than 255 events ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
---
 include/linux/ftrace_event.h |    5 ++++-
 kernel/trace/trace_events.c  |    2 +-
 kernel/trace/trace_output.c  |    2 ++
 3 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 2a4a407..07e0a6d 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -16,13 +16,16 @@ struct dentry;
  *     bash-15816 [01]   235.197585: idle_cpu <- irq_enter
  */
 struct trace_entry {
-	int			type;
+	unsigned short		type;
 	unsigned char		flags;
 	unsigned char		preempt_count;
 	int			pid;
 	int			tgid;
 };
 
+#define FTRACE_MAX_EVENT						\
+	((1 << (sizeof(((struct trace_entry *)0)->type) * 8)) - 1)
+
 /*
  * Trace iterator - used by printout routines who present trace
  * results to users and which routines might sleep, etc:
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 5d6e879..9887131 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -398,7 +398,7 @@ static int trace_write_header(struct trace_seq *s)
 				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
 				"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
 				"\n",
-				FIELD(int, type),
+				FIELD(unsigned short, type),
 				FIELD(unsigned char, flags),
 				FIELD(unsigned char, preempt_count),
 				FIELD(int, pid),
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index 83a8abb..06997e7 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -537,6 +537,8 @@ int register_ftrace_event(struct trace_event *event)
  out:
 	mutex_unlock(&trace_event_mutex);
 
+	WARN_ON_ONCE(next_event_type > FTRACE_MAX_EVENT);
+
 	return ret;
 }
 EXPORT_SYMBOL_GPL(register_ftrace_event);
-- 
1.6.2.1

-- 

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Li Zefan]

> From: Steven Rostedt <srostedt@redhat.com>
> 
> With the new event tracing registration, we must increase the number
> of events that can be registered. Currently the type field is only
> one byte, which leaves us only 256 possible events.
> 
> Since we do not save the CPU number in the tracer anymore (it is determined
> by the per cpu ring buffer that is used) we have an extra byte to use.
> 
> This patch increases the size of type from 1 byte (256 events) to
> 2 bytes (65,536 events).
> 

You forgot to change this:

@@ -198,7 +198,7 @@ ftrace_define_fields_##call(void)					\
 	struct ftrace_event_call *event_call = &event_##call;		\
 	int ret;							\
 									\
-	__common_field(int, type);					\
+	__common_field(unsigned short, type);				\

And we can apply the check in 3/6 to __common_field(). :)

> It also adds a WARN_ON_ONCE if we exceed that limit.
> 

WARN_ON_ONCE() may not be sufficient IMO:

We can reach 65536 this way (It took me 15 mins):

while (foo_bar.id < 65536) {
	insmod trace-events-sample.ko
	rmmod trace-events-sample.ko
}

Now next id will be 0! Then do this:

console 1:
 # cat /debug/tracing/trace_pipe

console 2:
while (1) {
	insmod trace-events-sample.ko
	echo foo_bar > /debug/tracing/set_event
	rmmod trace-events-sample.ko
}

I got this immediately:

BUG: unable to handle kernel NULL pointer dereference at 0000006f
IP: [<c05210f3>] bstr_printf+0x2ce/0x302
...
Call Trace:
 [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
 [<c0477569>] ? trace_bprint_print+0x58/0x6c
 [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
 [<c0428a41>] ? sub_preempt_count+0x85/0xa0
 [<c04758cf>] ? tracing_read_pipe+0x118/0x191
 [<c04757b7>] ? tracing_read_pipe+0x0/0x191
 [<c04b09f9>] ? vfs_read+0x8f/0x136
 [<c04b0da3>] ? sys_read+0x40/0x65
 [<c0402a68>] ? sysenter_do_call+0x12/0x36

(We can even get other crashes..)

So I think we should fail the initialization of the event, instead of
WARN_ON().

> @@ -537,6 +537,8 @@ int register_ftrace_event(struct trace_event *event)
>   out:
>  	mutex_unlock(&trace_event_mutex);
>  
> +	WARN_ON_ONCE(next_event_type > FTRACE_MAX_EVENT);
> +

This WARN_ON is triggered when we create an event with id == 65535,
but not 65536.

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Ingo Molnar]

* Li Zefan <lizf@cn.fujitsu.com> wrote:

> > From: Steven Rostedt <srostedt@redhat.com>
> > 
> > With the new event tracing registration, we must increase the number
> > of events that can be registered. Currently the type field is only
> > one byte, which leaves us only 256 possible events.
> > 
> > Since we do not save the CPU number in the tracer anymore (it is determined
> > by the per cpu ring buffer that is used) we have an extra byte to use.
> > 
> > This patch increases the size of type from 1 byte (256 events) to
> > 2 bytes (65,536 events).
> > 
> 
> You forgot to change this:
> 
> @@ -198,7 +198,7 @@ ftrace_define_fields_##call(void)					\
>  	struct ftrace_event_call *event_call = &event_##call;		\
>  	int ret;							\
>  									\
> -	__common_field(int, type);					\
> +	__common_field(unsigned short, type);				\
> 
> And we can apply the check in 3/6 to __common_field(). :)
> 
> > It also adds a WARN_ON_ONCE if we exceed that limit.
> > 
> 
> WARN_ON_ONCE() may not be sufficient IMO:
> 
> We can reach 65536 this way (It took me 15 mins):
> 
> while (foo_bar.id < 65536) {
> 	insmod trace-events-sample.ko
> 	rmmod trace-events-sample.ko
> }
> 
> Now next id will be 0! Then do this:
> 
> console 1:
>  # cat /debug/tracing/trace_pipe
> 
> console 2:
> while (1) {
> 	insmod trace-events-sample.ko
> 	echo foo_bar > /debug/tracing/set_event
> 	rmmod trace-events-sample.ko
> }
> 
> I got this immediately:
> 
> BUG: unable to handle kernel NULL pointer dereference at 0000006f
> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
> ...
> Call Trace:
>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
>  [<c04b09f9>] ? vfs_read+0x8f/0x136
>  [<c04b0da3>] ? sys_read+0x40/0x65
>  [<c0402a68>] ? sysenter_do_call+0x12/0x36
> 
> (We can even get other crashes..)
> 
> So I think we should fail the initialization of the event, instead of
> WARN_ON().

Hm, i think this might also call for a 32-bit event ID after all, 
right? Especially if we get some more dynamic form of injecting such 
tracepoints, 64K does not sound all that far in the future anymore. 
It is stretching things, but still it would be a silly limit to 
leave in place, hm?

	Ingo

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

On Fri, 24 Apr 2009, Ingo Molnar wrote:

> 
> * Li Zefan <lizf@cn.fujitsu.com> wrote:
> 
> > > From: Steven Rostedt <srostedt@redhat.com>
> > > 
> > > With the new event tracing registration, we must increase the number
> > > of events that can be registered. Currently the type field is only
> > > one byte, which leaves us only 256 possible events.
> > > 
> > > Since we do not save the CPU number in the tracer anymore (it is determined
> > > by the per cpu ring buffer that is used) we have an extra byte to use.
> > > 
> > > This patch increases the size of type from 1 byte (256 events) to
> > > 2 bytes (65,536 events).
> > > 
> > 
> > You forgot to change this:
> > 
> > @@ -198,7 +198,7 @@ ftrace_define_fields_##call(void)					\
> >  	struct ftrace_event_call *event_call = &event_##call;		\
> >  	int ret;							\
> >  									\
> > -	__common_field(int, type);					\
> > +	__common_field(unsigned short, type);				\
> > 
> > And we can apply the check in 3/6 to __common_field(). :)
> > 
> > > It also adds a WARN_ON_ONCE if we exceed that limit.
> > > 
> > 
> > WARN_ON_ONCE() may not be sufficient IMO:
> > 
> > We can reach 65536 this way (It took me 15 mins):
> > 
> > while (foo_bar.id < 65536) {
> > 	insmod trace-events-sample.ko
> > 	rmmod trace-events-sample.ko
> > }
> > 
> > Now next id will be 0! Then do this:
> > 
> > console 1:
> >  # cat /debug/tracing/trace_pipe
> > 
> > console 2:
> > while (1) {
> > 	insmod trace-events-sample.ko
> > 	echo foo_bar > /debug/tracing/set_event
> > 	rmmod trace-events-sample.ko
> > }
> > 
> > I got this immediately:
> > 
> > BUG: unable to handle kernel NULL pointer dereference at 0000006f
> > IP: [<c05210f3>] bstr_printf+0x2ce/0x302
> > ...
> > Call Trace:
> >  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
> >  [<c0477569>] ? trace_bprint_print+0x58/0x6c
> >  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
> >  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
> >  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
> >  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
> >  [<c04b09f9>] ? vfs_read+0x8f/0x136
> >  [<c04b0da3>] ? sys_read+0x40/0x65
> >  [<c0402a68>] ? sysenter_do_call+0x12/0x36
> > 
> > (We can even get other crashes..)
> > 
> > So I think we should fail the initialization of the event, instead of
> > WARN_ON().
> 
> Hm, i think this might also call for a 32-bit event ID after all, 
> right? Especially if we get some more dynamic form of injecting such 
> tracepoints, 64K does not sound all that far in the future anymore. 
> It is stretching things, but still it would be a silly limit to 
> leave in place, hm?

I would like to keep the size of the buffer down as much as possible. 
There are only 22,000 functions (with full function tracing) so 65000 
events should be more than enough.

The problem happens when we load and unload modules. If 65000 is not 
enough, 4G wont be enough either. We would only need to run the module 
load/unload a bit longer ;-)

I'll work on adding a way to reuse event keys.

-- Steve

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

On Fri, 24 Apr 2009, Li Zefan wrote:

> > From: Steven Rostedt <srostedt@redhat.com>
> > 
> > With the new event tracing registration, we must increase the number
> > of events that can be registered. Currently the type field is only
> > one byte, which leaves us only 256 possible events.
> > 
> > Since we do not save the CPU number in the tracer anymore (it is determined
> > by the per cpu ring buffer that is used) we have an extra byte to use.
> > 
> > This patch increases the size of type from 1 byte (256 events) to
> > 2 bytes (65,536 events).
> > 
> 
> You forgot to change this:
> 
> @@ -198,7 +198,7 @@ ftrace_define_fields_##call(void)					\
>  	struct ftrace_event_call *event_call = &event_##call;		\
>  	int ret;							\
>  									\
> -	__common_field(int, type);					\
> +	__common_field(unsigned short, type);				\
> 
> And we can apply the check in 3/6 to __common_field(). :)

Heh, that's what happens when I forward port a patch. I did not look at 
all the changes that had happened.

Thanks.

> 
> > It also adds a WARN_ON_ONCE if we exceed that limit.
> > 
> 
> WARN_ON_ONCE() may not be sufficient IMO:
> 
> We can reach 65536 this way (It took me 15 mins):
> 
> while (foo_bar.id < 65536) {
> 	insmod trace-events-sample.ko
> 	rmmod trace-events-sample.ko
> }
> 

Grumble, this patch was also written before events could be in modules.
I need to change the way register events works to reuse events.

I could have it search the list of events on overflow to find a new 
number.

> Now next id will be 0! Then do this:
> 
> console 1:
>  # cat /debug/tracing/trace_pipe
> 
> console 2:
> while (1) {
> 	insmod trace-events-sample.ko
> 	echo foo_bar > /debug/tracing/set_event
> 	rmmod trace-events-sample.ko
> }
> 
> I got this immediately:
> 
> BUG: unable to handle kernel NULL pointer dereference at 0000006f
> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
> ...
> Call Trace:
>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
>  [<c04b09f9>] ? vfs_read+0x8f/0x136
>  [<c04b0da3>] ? sys_read+0x40/0x65
>  [<c0402a68>] ? sysenter_do_call+0x12/0x36

Ooh, that looks like a different bug. Thanks, I'll investigate that one.

> 
> (We can even get other crashes..)
> 
> So I think we should fail the initialization of the event, instead of
> WARN_ON().
> 
> > @@ -537,6 +537,8 @@ int register_ftrace_event(struct trace_event *event)
> >   out:
> >  	mutex_unlock(&trace_event_mutex);
> >  
> > +	WARN_ON_ONCE(next_event_type > FTRACE_MAX_EVENT);
> > +
> 
> This WARN_ON is triggered when we create an event with id == 65535,
> but not 65536.

Or search for an available number and fail (and warn on) if it fails.

Thanks,

-- Steve

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

On Fri, 24 Apr 2009, Li Zefan wrote:
> 
> console 1:
>  # cat /debug/tracing/trace_pipe
> 
> console 2:
> while (1) {
> 	insmod trace-events-sample.ko
> 	echo foo_bar > /debug/tracing/set_event
> 	rmmod trace-events-sample.ko
> }
> 
> I got this immediately:
> 
> BUG: unable to handle kernel NULL pointer dereference at 0000006f
> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
> ...
> Call Trace:
>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
>  [<c04b09f9>] ? vfs_read+0x8f/0x136
>  [<c04b0da3>] ? sys_read+0x40/0x65
>  [<c0402a68>] ? sysenter_do_call+0x12/0x36
> 
> (We can even get other crashes..)
> 

Can you send me your full bootlog and config. I'm not able to reproduce 
this.

-- Steve

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

On Fri, 24 Apr 2009, Steven Rostedt wrote:

> 
> On Fri, 24 Apr 2009, Li Zefan wrote:
> > 
> > console 1:
> >  # cat /debug/tracing/trace_pipe
> > 
> > console 2:
> > while (1) {
> > 	insmod trace-events-sample.ko
> > 	echo foo_bar > /debug/tracing/set_event
> > 	rmmod trace-events-sample.ko
> > }
> > 
> > I got this immediately:
> > 
> > BUG: unable to handle kernel NULL pointer dereference at 0000006f
> > IP: [<c05210f3>] bstr_printf+0x2ce/0x302
> > ...
> > Call Trace:
> >  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
> >  [<c0477569>] ? trace_bprint_print+0x58/0x6c
> >  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
> >  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
> >  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
> >  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
> >  [<c04b09f9>] ? vfs_read+0x8f/0x136
> >  [<c04b0da3>] ? sys_read+0x40/0x65
> >  [<c0402a68>] ? sysenter_do_call+0x12/0x36
> > 
> > (We can even get other crashes..)
> > 
> 
> Can you send me your full bootlog and config. I'm not able to reproduce 
> this.

And the SHA1 of the HEAD of the git repo you are using.

Thanks,

-- Steve

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Li Zefan]

[-- Attachment #1: Type: text/plain, Size: 2828 bytes --]

Steven Rostedt wrote:
> On Fri, 24 Apr 2009, Steven Rostedt wrote:
> 
>> On Fri, 24 Apr 2009, Li Zefan wrote:
>>> console 1:
>>>  # cat /debug/tracing/trace_pipe
>>>
>>> console 2:
>>> while (1) {
>>> 	insmod trace-events-sample.ko
>>> 	echo foo_bar > /debug/tracing/set_event
>>> 	rmmod trace-events-sample.ko
>>> }
>>>
>>> I got this immediately:
>>>
>>> BUG: unable to handle kernel NULL pointer dereference at 0000006f
>>> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
>>> ...
>>> Call Trace:
>>>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
>>>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
>>>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
>>>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
>>>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
>>>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
>>>  [<c04b09f9>] ? vfs_read+0x8f/0x136
>>>  [<c04b0da3>] ? sys_read+0x40/0x65
>>>  [<c0402a68>] ? sysenter_do_call+0x12/0x36
>>>
>>> (We can even get other crashes..)
>>>
>> Can you send me your full bootlog and config. I'm not able to reproduce 
>> this.
> 
> And the SHA1 of the HEAD of the git repo you are using.
> 
> Thanks,
> 

the HEAD: 9ce5424d75e56891905b77d1589924765e62059a + this patch

(I commented out "hi" from the sample module)

I think it's because "type" is wrapped back to 0. I changed the test script
like this:

while (foo_bar.id < 65536)
{
	insmod trace-events-sample.ko
	rmmod trace-events-sample.ko
}

for ((; ;))
{
        insmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
        echo trace-events-sample:foo_bar > /mnt/tracing/set_event
        sleep 1
        cat /mnt/tracing/trace
        rmmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
}

See what I saw:

# tracer: nop
#
#           TASK-PID    CPU#    TIMESTAMP  FUNCTION
#              | |       |          |         |
           <...>-8449  [000]  1305.284303: Unknown type 0
           <...>-8449  [000]  1305.376875: Unknown type 0
           <...>-8457  [000]  1306.384178:  <-
           <...>-8457  [000]  1306.476297:  <-
           <...>-8467  [000]  1307.501050:  1819043176:111:R ==> [-1478325281] 1819017216:  0:R <...>
           <...>-8467  [000]  1307.589070:  1819043176:111:R ==> [-1629971735] 1819017216:  1:R <...>
           <...>-8476  [000]  1308.611875:  1819043176:111:R   + [-1444866625] 1819017216:  0:R <...>
           <...>-8476  [000]  1308.700941:  1819043176:111:R   + [1819017216] 1819017216:  1:R <...>
           <...>-8485  [001]  1309.710751:
 <=
 <=
 <= 0
 <=
 <=
 <=
 <=
           <...>-8485  [001]  1309.807031:
 <=
 <=
 <=
 <=
 <=
 <=
 <=
           <...>-8493  [001]  1310.815615: : o./test.sh: line 15:  8505 Killed                  cat /mnt/tracing/trace
(OOPS!!)

.config and full log are attached

(ps: I will be on vacation, and won't be able to reply to any mail in the
 following one week..)

[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 28995 bytes --]

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.30-rc3-tip (root@localhost.localdomain) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #114 SMP PREEMPT Sun Apr 26 14:16:01 CST 2009
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003bff0000 (usable)
 BIOS-e820: 000000003bff0000 - 000000003bff3000 (ACPI NVS)
 BIOS-e820: 000000003bff3000 - 000000003c000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3bff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C7FFF write-protect
  C8000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 03C000000 mask FFC000000 uncachable
  2 base 0D0000000 mask FF8000000 write-combining
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 37d0d000 - 37fefd3b
Allocated new RAMDISK: 00100000 - 003e2d3b
Move RAMDISK from 0000000037d0d000 - 0000000037fefd3a to 00100000 - 003e2d3a
ACPI: RSDP 000f7560 00014 (v00 AWARD )
ACPI: RSDT 3bff3040 0002C (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3bff30c0 00074 (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3bff3180 03ABC (v01 AWARD  AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3bff0000 00040
ACPI: APIC 3bff6c80 00084 (v01 AWARD  AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
71MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
  node 0 low ram: 00000000 - 377fe000
  node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
  #3 [0000400000 - 0000c7727c]    TEXT DATA BSS ==> [0000400000 - 0000c7727c]
  #4 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  #5 [0000c78000 - 0000c7c0ed]              BRK ==> [0000c78000 - 0000c7c0ed]
  #6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
  #7 [0000100000 - 00003e2d3b]      NEW RAMDISK ==> [0000100000 - 00003e2d3b]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00f5ad0] f5ad0
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x0003bff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003bff0
On node 0 totalpages: 245631
free_area_init_node: node 0, pgdat c077dc40, node_mem_map c1000340
  DMA zone: 52 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3931 pages, LIFO batch:0
  Normal zone: 2834 pages used for memmap
  Normal zone: 220396 pages, LIFO batch:31
  HighMem zone: 234 pages used for memmap
  HighMem zone: 18184 pages, LIFO batch:3
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 40000000 (gap: 3c000000:c2c00000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 15 pages at c1c3b000, static data 37716 bytes
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 242511
Kernel command line: ro root=LABEL=/ rhgb quiet
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Preemptible RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=c1c3b000 soft=c1c3c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 2800.071 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES:  8
... MAX_LOCK_DEPTH:          48
... MAX_LOCKDEP_KEYS:        8191
... CLASSHASH_SIZE:          4096
... MAX_LOCKDEP_ENTRIES:     8192
... MAX_LOCKDEP_CHAINS:      16384
... CHAINHASH_SIZE:          8192
 memory used by lock dependency info: 2847 kB
 per task-struct memory footprint: 1152 bytes
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 4914560 bytes of page_cgroup
please try cgroup_disable=memory option if you don't want
Initializing HighMem for node 0 (000377fe:0003bff0)
Memory: 952236k/982976k available (2274k kernel code, 30104k reserved, 1428k data, 340k init, 73672k highmem)
virtual kernel memory layout:
    fixmap  : 0xffedf000 - 0xfffff000   (1152 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc07a2000 - 0xc07f7000   ( 340 kB)
      .data : 0xc06389dd - 0xc079dd58   (1428 kB)
      .text : 0xc0400000 - 0xc06389dd   (2274 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 5600.14 BogoMIPS (lpj=2800071)
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 12315 entries in 25 pages
Failed to register trace ftrace module notifier
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
lockdep: fixing up alternatives.
CPU 1 irqstacks, hard=c1c4b000 soft=c1c4c000
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5599.19 BogoMIPS (lpj=2799595)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (11199.33 BogoMIPS).
CPU0 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 1 0
net_namespace: 436 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbda0, last bus=1
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
pci 0000:00:02.5: reg 20 io port: [0x4000-0x400f]
pci 0000:00:02.5: PME# supported from D3cold
pci 0000:00:02.5: PME# disabled
pci 0000:00:02.7: reg 10 io port: [0xd000-0xd0ff]
pci 0000:00:02.7: reg 14 io port: [0xd400-0xd47f]
pci 0000:00:02.7: supports D1 D2
pci 0000:00:02.7: PME# supported from D3hot D3cold
pci 0000:00:02.7: PME# disabled
pci 0000:00:03.0: reg 10 32bit mmio: [0xe1104000-0xe1104fff]
pci 0000:00:03.1: reg 10 32bit mmio: [0xe1100000-0xe1100fff]
pci 0000:00:03.2: reg 10 32bit mmio: [0xe1101000-0xe1101fff]
pci 0000:00:03.3: reg 10 32bit mmio: [0xe1102000-0xe1102fff]
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:05.0: reg 10 io port: [0xd800-0xd807]
pci 0000:00:05.0: reg 14 io port: [0xdc00-0xdc03]
pci 0000:00:05.0: reg 18 io port: [0xe000-0xe007]
pci 0000:00:05.0: reg 1c io port: [0xe400-0xe403]
pci 0000:00:05.0: reg 20 io port: [0xe800-0xe80f]
pci 0000:00:05.0: PME# supported from D3cold
pci 0000:00:05.0: PME# disabled
pci 0000:00:0e.0: reg 10 io port: [0xec00-0xecff]
pci 0000:00:0e.0: reg 14 32bit mmio: [0xe1103000-0xe11030ff]
pci 0000:00:0e.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:00:0e.0: supports D1 D2
pci 0000:00:0e.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0xe1000000-0xe101ffff]
pci 0000:01:00.0: reg 18 io port: [0xc000-0xc07f]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:01.0: bridge 32bit mmio: [0xe1000000-0xe10fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 14 15)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
Failed to register trace events module notifier
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: iomem range 0xc8000-0xcbfff has been reserved
system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
system 00:00: iomem range 0xfc000-0xfffff could not be reserved
system 00:00: iomem range 0x3bff0000-0x3bffffff could not be reserved
system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0x100000-0x3bfeffff could not be reserved
system 00:00: iomem range 0xffee0000-0xffefffff has been reserved
system 00:00: iomem range 0xfffe0000-0xfffeffff has been reserved
system 00:00: iomem range 0xfec00000-0xfecfffff has been reserved
system 00:00: iomem range 0xfee00000-0xfeefffff has been reserved
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0x800-0x805 has been reserved
system 00:02: ioport range 0x290-0x297 has been reserved
system 00:02: ioport range 0x880-0x88f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: 0xc000-0xcfff
pci 0000:00:01.0:   MEM window: 0xe1000000-0xe10fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d8000000-0x000000dfffffff
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xe1000000-0xe10fffff]
pci_bus 0000:01: resource 2 mem: [0xd8000000-0xdfffffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...
rootfs image is initramfs; unpacking...
Freeing initrd memory: 2955k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
msgmni has been set to 1722
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor ACPI_CPU:00: registered as cooling_device1
processor ACPI_CPU:01: registered as cooling_device2
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (58 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-sis 0000:00:00.0: SiS chipset [1039/0661]
agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 340k freed
Write protecting the kernel text: 2276k
Write protecting the kernel read-only data: 1124k
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.3: cache line size of 128 is not supported
ehci_hcd 0000:00:03.3: irq 23, io mem 0xe1102000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xe1104000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xe1100000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xe1101000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
pata_sis 0000:00:02.5: version 0.5.2
pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15
input: ImPS/2 Logitech Wheel Mouse as /class/input/input0
input: AT Translated Set 2 keyboard as /class/input/input1
sata_sis 0000:00:05.0: version 1.0
sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
scsi2 : sata_sis
scsi3 : sata_sis
ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe800 irq 17
ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xe400 bmdma 0xe808 irq 17
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3808110AS, 3.AAE, max UDMA/133
ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST3808110AS      3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 2:0:0:0: [sda] Attached SCSI disk
ata4: SATA link down (SStatus 0 SControl 300)
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting.  Commit interval 5 seconds
sd 2:0:0:0: Attached scsi generic sg0 type 0
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [FUTS]
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:00:0e.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:00:0e.0: no PCI Express capability
eth0: RTL8110s at 0xf842e000, 00:16:ec:2e:b7:e0, XID 04000000 IRQ 18
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ramfs: bad mount option: maxsize=512
EXT3 FS on sda8, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda7, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1052216k swap on /dev/sda6.  Priority:-1 extents:1 across:1052216k 
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
kudzu[1109] general protection ip:8056968 sp:bfaf9190 error:0
r8169: eth0: link up
r8169: eth0: link up
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 0 1
CPU1 attaching sched-domain:
 domain 0: span 0-1 level CPU
  groups: 1 0
------------[ cut here ]------------
WARNING: at kernel/trace/trace_output.c:540 register_ftrace_event+0x100/0x116()
Hardware name: Aspire SA85
Modules linked in: trace_events_sample(+) autofs4 parport_pc r8169 parport mii button sg sata_sis pata_sis ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: trace_events_sample]
Pid: 8438, comm: insmod Not tainted 2.6.30-rc3-tip #114
Call Trace:
 [<c04319e5>] warn_slowpath+0x79/0x8f
 [<c045305d>] ? __lock_acquire+0x6d8/0x73e
 [<c0450c06>] ? mark_held_locks+0x3d/0x58
 [<c0635def>] ? __mutex_unlock_slowpath+0xfc/0x118
 [<c0450d42>] ? trace_hardirqs_on_caller+0x121/0x14c
 [<c0450d78>] ? trace_hardirqs_on+0xb/0xd
 [<c04768d6>] register_ftrace_event+0x100/0x116
 [<fc26606f>] ftrace_raw_init_event_foo_bar+0x12/0x44 [trace_events_sample]
 [<c047e526>] event_create_dir+0x188/0x258
 [<c047e774>] trace_module_notify+0x75/0xd7
 [<c0446f08>] notifier_call_chain+0x2b/0x4a
 [<c04470dd>] __blocking_notifier_call_chain+0x3c/0x51
 [<c0447103>] blocking_notifier_call_chain+0x11/0x13
 [<c045b2a5>] sys_init_module+0x7b/0x19a
 [<c0402a68>] sysenter_do_call+0x12/0x36
---[ end trace c9a7650689381993 ]---
BUG: unable to handle kernel NULL pointer dereference at 0000006f
IP: [<c05210f3>] bstr_printf+0x2ce/0x302
*pde = 00000000 
Oops: 0000 [#1] PREEMPT SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/irq
Modules linked in: trace_events_sample autofs4 parport_pc r8169 parport mii button sg sata_sis pata_sis ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: trace_events_sample]

Pid: 8505, comm: cat Tainted: G        W  (2.6.30-rc3-tip #114) Aspire SA85
EIP: 0060:[<c05210f3>] EFLAGS: 00010206 CPU: 0
EIP is at bstr_printf+0x2ce/0x302
EAX: f7047194 EBX: 00000fd2 ECX: 0000006f EDX: f651e09d
ESI: 0000006f EDI: d0abdea8 EBP: d0abdebc ESP: d0abde78
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 8505, ti=d0abd000 task=ed7220a0 task.ti=d0abd000)
Stack:
 00000fd2 f651e09d f651e09d f651f06f f7047194 d0abdec0 00000000 00000000
 00000000 00000000 00000000 00000000 c06f66c8 d0abdecc 00000fd2 f651e070
 0000006f d0abded4 c0476d12 f7047194 f7047180 f651e070 00000001 d0abdee8
Call Trace:
 [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
 [<c0477569>] ? trace_bprint_print+0x58/0x6c
 [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
 [<c0472cb9>] ? find_next_entry_inc+0x75/0x97
 [<c047067d>] ? ring_buffer_read+0x44/0x65
 [<c0473766>] ? s_show+0x274/0x28b
 [<c0472d11>] ? s_next+0x36/0x5c
 [<c04c4f25>] ? seq_read+0x22e/0x30d
 [<c04c4cf7>] ? seq_read+0x0/0x30d
 [<c04b09f9>] ? vfs_read+0x8f/0x136
 [<c04b0da3>] ? sys_read+0x40/0x65
 [<c0402a68>] ? sysenter_do_call+0x12/0x36
Code: c1 fe 1f 83 ec 18 b9 18 00 00 00 8d 55 d4 89 e0 e8 97 07 00 00 8b 55 c8 8b 45 c4 56 53 e8 4c ed ff ff 89 45 c4 83 c4 20 8b 75 d0 <80> 3e 00 0f 85 a7 fd ff ff 83 7d bc 00 74 17 8b 45 c8 39 45 c4 
EIP: [<c05210f3>] bstr_printf+0x2ce/0x302 SS:ESP 0068:d0abde78
CR2: 000000000000006f
---[ end trace c9a7650689381994 ]---
BUG: unable to handle kernel NULL pointer dereference at 0000006f
IP: [<c05210f3>] bstr_printf+0x2ce/0x302
*pde = 00000000 
Oops: 0000 [#2] PREEMPT SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/irq
Modules linked in: trace_events_sample autofs4 parport_pc r8169 parport mii button sg sata_sis pata_sis ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: trace_events_sample]

Pid: 8536, comm: cat Tainted: G      D W  (2.6.30-rc3-tip #114) Aspire SA85
EIP: 0060:[<c05210f3>] EFLAGS: 00010206 CPU: 0
EIP is at bstr_printf+0x2ce/0x302
EAX: f7047194 EBX: 00000fd2 ECX: 0000006f EDX: d0afa09d
ESI: 0000006f EDI: d0ad1ea8 EBP: d0ad1ebc ESP: d0ad1e78
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 8536, ti=d0ad1000 task=ed7261e0 task.ti=d0ad1000)
Stack:
 00000fd2 d0afa09d d0afa09d d0afb06f f7047194 d0ad1ec0 00000000 00000000
 00000000 00000000 00000000 00000000 c06f66c8 d0ad1ecc 00000fd2 d0afa070
 0000006f d0ad1ed4 c0476d12 f7047194 f7047180 d0afa070 00000001 d0ad1ee8
Call Trace:
 [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
 [<c0477569>] ? trace_bprint_print+0x58/0x6c
 [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
 [<c0472cb9>] ? find_next_entry_inc+0x75/0x97
 [<c047067d>] ? ring_buffer_read+0x44/0x65
 [<c0473766>] ? s_show+0x274/0x28b
 [<c0472d11>] ? s_next+0x36/0x5c
 [<c04c4f25>] ? seq_read+0x22e/0x30d
 [<c04c4cf7>] ? seq_read+0x0/0x30d
 [<c04b09f9>] ? vfs_read+0x8f/0x136
 [<c04b0da3>] ? sys_read+0x40/0x65
 [<c0402a68>] ? sysenter_do_call+0x12/0x36
Code: c1 fe 1f 83 ec 18 b9 18 00 00 00 8d 55 d4 89 e0 e8 97 07 00 00 8b 55 c8 8b 45 c4 56 53 e8 4c ed ff ff 89 45 c4 83 c4 20 8b 75 d0 <80> 3e 00 0f 85 a7 fd ff ff 83 7d bc 00 74 17 8b 45 c8 39 45 c4 
EIP: [<c05210f3>] bstr_printf+0x2ce/0x302 SS:ESP 0068:d0ad1e78
CR2: 000000000000006f
---[ end trace c9a7650689381995 ]---
BUG: unable to handle kernel NULL pointer dereference at 0000006f
IP: [<c05210f3>] bstr_printf+0x2ce/0x302
*pde = 00000000 
Oops: 0000 [#3] PREEMPT SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/irq
Modules linked in: trace_events_sample autofs4 parport_pc r8169 parport mii button sg sata_sis pata_sis ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: trace_events_sample]

Pid: 8567, comm: cat Tainted: G      D W  (2.6.30-rc3-tip #114) Aspire SA85
EIP: 0060:[<c05210f3>] EFLAGS: 00010206 CPU: 1
EIP is at bstr_printf+0x2ce/0x302
EAX: f7047194 EBX: 00000fd2 ECX: 0000006f EDX: d0af209d
ESI: 0000006f EDI: ed707ea8 EBP: ed707ebc ESP: ed707e78
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 8567, ti=ed707000 task=e14c4c20 task.ti=ed707000)
Stack:
 00000fd2 d0af209d d0af209d d0af306f f7047194 ed707ec0 00000000 00000000
 00000000 00000000 00000000 00000000 c06f66c8 ed707ecc 00000fd2 d0af2070
 0000006f ed707ed4 c0476d12 f7047194 f7047180 d0af2070 00000001 ed707ee8
Call Trace:
 [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
 [<c0477569>] ? trace_bprint_print+0x58/0x6c
 [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
 [<c0472cb9>] ? find_next_entry_inc+0x75/0x97
 [<c047067d>] ? ring_buffer_read+0x44/0x65
 [<c0473766>] ? s_show+0x274/0x28b
 [<c0472d11>] ? s_next+0x36/0x5c
 [<c04c4f25>] ? seq_read+0x22e/0x30d
 [<c04c4cf7>] ? seq_read+0x0/0x30d
 [<c04b09f9>] ? vfs_read+0x8f/0x136
 [<c04b0da3>] ? sys_read+0x40/0x65
 [<c0402a68>] ? sysenter_do_call+0x12/0x36
Code: c1 fe 1f 83 ec 18 b9 18 00 00 00 8d 55 d4 89 e0 e8 97 07 00 00 8b 55 c8 8b 45 c4 56 53 e8 4c ed ff ff 89 45 c4 83 c4 20 8b 75 d0 <80> 3e 00 0f 85 a7 fd ff ff 83 7d bc 00 74 17 8b 45 c8 39 45 c4 
EIP: [<c05210f3>] bstr_printf+0x2ce/0x302 SS:ESP 0068:ed707e78
CR2: 000000000000006f
---[ end trace c9a7650689381996 ]---
BUG: unable to handle kernel NULL pointer dereference at 0000006f
IP: [<c05210f3>] bstr_printf+0x2ce/0x302
*pde = 00000000 
Oops: 0000 [#4] PREEMPT SMP 
last sysfs file: /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/irq
Modules linked in: trace_events_sample autofs4 parport_pc r8169 parport mii button sg sata_sis pata_sis ata_generic libata sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last unloaded: trace_events_sample]

Pid: 8598, comm: cat Tainted: G      D W  (2.6.30-rc3-tip #114) Aspire SA85
EIP: 0060:[<c05210f3>] EFLAGS: 00010206 CPU: 1
EIP is at bstr_printf+0x2ce/0x302
EAX: f7047194 EBX: 00000fd2 ECX: 0000006f EDX: d0af409d
ESI: 0000006f EDI: e15ddea8 EBP: e15ddebc ESP: e15dde78
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process cat (pid: 8598, ti=e15dd000 task=ed723660 task.ti=e15dd000)
Stack:
 00000fd2 d0af409d d0af409d d0af506f f7047194 e15ddec0 00000000 00000000
 00000000 00000000 00000000 00000000 c06f66c8 e15ddecc 00000fd2 d0af4070
 0000006f e15dded4 c0476d12 f7047194 f7047180 d0af4070 00000001 e15ddee8
Call Trace:
 [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
 [<c0477569>] ? trace_bprint_print+0x58/0x6c
 [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
 [<c0472cb9>] ? find_next_entry_inc+0x75/0x97
 [<c047067d>] ? ring_buffer_read+0x44/0x65
 [<c0473766>] ? s_show+0x274/0x28b
 [<c0472d11>] ? s_next+0x36/0x5c
 [<c04c4f25>] ? seq_read+0x22e/0x30d
 [<c04c4cf7>] ? seq_read+0x0/0x30d
 [<c04b09f9>] ? vfs_read+0x8f/0x136
 [<c04b0da3>] ? sys_read+0x40/0x65
 [<c0402a68>] ? sysenter_do_call+0x12/0x36
Code: c1 fe 1f 83 ec 18 b9 18 00 00 00 8d 55 d4 89 e0 e8 97 07 00 00 8b 55 c8 8b 45 c4 56 53 e8 4c ed ff ff 89 45 c4 83 c4 20 8b 75 d0 <80> 3e 00 0f 85 a7 fd ff ff 83 7d bc 00 74 17 8b 45 c8 39 45 c4 
EIP: [<c05210f3>] bstr_printf+0x2ce/0x302 SS:ESP 0068:e15dde78
CR2: 000000000000006f
---[ end trace c9a7650689381997 ]---

[-- Attachment #3: myconfig --]
[-- Type: text/plain, Size: 64134 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc3
# Fri Apr 24 14:41:05 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
# CONFIG_CLASSIC_RCU is not set
# CONFIG_TREE_RCU is not set
CONFIG_PREEMPT_RCU=y
CONFIG_RCU_TRACE=y
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_PREEMPT_RCU_TRACE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_CGROUP_MEM_RES_CTLR=y
CONFIG_CGROUP_MEM_RES_CTLR_SWAP=y
CONFIG_MM_OWNER=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_HIGHPTE=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x400000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=1999
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=y
CONFIG_X86_SPEEDSTEP_SMI=y
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=y
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
# CONFIG_PCMCIA_IOCTL is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
# CONFIG_TCP_CONG_VEGAS is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_CBQ is not set
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_DSMARK is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set

#
# Classification
#
CONFIG_NET_CLS=y
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_TCINDEX is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_RSVP is not set
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_CLS_CGROUP=y
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
CONFIG_PARIDE=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
# CONFIG_PARIDE_PT is not set
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
# CONFIG_PARIDE_ATEN is not set
# CONFIG_PARIDE_BPCK is not set
# CONFIG_PARIDE_BPCK6 is not set
# CONFIG_PARIDE_COMM is not set
# CONFIG_PARIDE_DSTR is not set
# CONFIG_PARIDE_FIT2 is not set
# CONFIG_PARIDE_FIT3 is not set
# CONFIG_PARIDE_EPAT is not set
# CONFIG_PARIDE_EPIA is not set
# CONFIG_PARIDE_FRIQ is not set
# CONFIG_PARIDE_FRPW is not set
# CONFIG_PARIDE_KBIC is not set
# CONFIG_PARIDE_KTTI is not set
# CONFIG_PARIDE_ON20 is not set
# CONFIG_PARIDE_ON26 is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
# CONFIG_SCSI_SRP_TGT_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
CONFIG_SCSI_ACARD=m
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
CONFIG_SCSI_ADVANSYS=m
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_FLASHPOINT is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
CONFIG_PCMCIA_QLOGIC=m
# CONFIG_PCMCIA_SYM53C500 is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=m
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=m
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIS=m
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
CONFIG_PATA_ATIIXP=m
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=m
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_PATA_SCH is not set
# CONFIG_MD is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
CONFIG_LXT_PHY=m
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
CONFIG_EL3=m
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_LANCE is not set
CONFIG_NET_VENDOR_SMC=y
# CONFIG_ULTRA is not set
# CONFIG_SMC9194 is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_ISA=y
# CONFIG_E2100 is not set
# CONFIG_EWRK3 is not set
# CONFIG_EEXPRESS is not set
# CONFIG_EEXPRESS_PRO is not set
# CONFIG_HPLAN is not set
# CONFIG_LP486E is not set
# CONFIG_ETH16I is not set
CONFIG_NE2000=m
# CONFIG_ZNET is not set
# CONFIG_SEEQ8005 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
CONFIG_FORCEDETH_NAPI=y
# CONFIG_CS89x0 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
CONFIG_NE2K_PCI=m
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_NET_PCMCIA=y
# CONFIG_PCMCIA_3C589 is not set
# CONFIG_PCMCIA_3C574 is not set
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_MPPE is not set
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SIMTEC=m

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m

#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_ISA=m
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_STUB=m
# CONFIG_SCx200_ACB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
CONFIG_SENSORS_AD7418=m
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
CONFIG_VIDEO_IR_I2C=m

#
# Encoders/decoders and other helper chips
#

#
# Audio decoders
#
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
# CONFIG_VIDEO_CS5345 is not set
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set

#
# Video decoders
#
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_BT866=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
# CONFIG_VIDEO_TCM825X is not set
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_SAA7191=m
# CONFIG_VIDEO_TVP514X is not set
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m

#
# Video and audio decoders
#
CONFIG_VIDEO_CX25840=m

#
# MPEG video encoders
#
CONFIG_VIDEO_CX2341X=m

#
# Video encoders
#
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m

#
# Video improvement chips
#
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_PMS is not set
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
CONFIG_VIDEO_ZORAN=m
# CONFIG_VIDEO_ZORAN_DC30 is not set
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
# CONFIG_VIDEO_ZORAN_DC10 is not set
CONFIG_VIDEO_ZORAN_LML33=m
# CONFIG_VIDEO_ZORAN_LML33R10 is not set
# CONFIG_VIDEO_ZORAN_AVS6EYES is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
CONFIG_VIDEO_IVTV=m
# CONFIG_VIDEO_FB_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_ALI=y
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
CONFIG_AGP_NVIDIA=y
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
CONFIG_AGP_EFFICEON=y
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
CONFIG_FB_TRIDENT=m
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_BACKLIGHT_PROGEAR=m
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_USBAT=m
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
CONFIG_UIO=m
# CONFIG_UIO_CIF is not set
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4DEV_COMPAT=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_FS_XIP=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_HIGHMEM=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_PREEMPT_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_ENABLE_EVENT_TRACING=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BOOT_TRACER=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_POWER_TRACER=y
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_MMIOTRACE_TEST=m
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_MARKERS is not set
# CONFIG_SAMPLE_TRACEPOINTS is not set
CONFIG_SAMPLE_TRACE_EVENTS=m
# CONFIG_SAMPLE_KOBJECT is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

Hi Li,


On Sun, 26 Apr 2009, Li Zefan wrote:

> Steven Rostedt wrote:
> > On Fri, 24 Apr 2009, Steven Rostedt wrote:
> > 
> >> On Fri, 24 Apr 2009, Li Zefan wrote:
> >>> console 1:
> >>>  # cat /debug/tracing/trace_pipe
> >>>
> >>> console 2:
> >>> while (1) {
> >>> 	insmod trace-events-sample.ko
> >>> 	echo foo_bar > /debug/tracing/set_event
> >>> 	rmmod trace-events-sample.ko
> >>> }
> >>>
> >>> I got this immediately:
> >>>
> >>> BUG: unable to handle kernel NULL pointer dereference at 0000006f
> >>> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
> >>> ...
> >>> Call Trace:
> >>>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
> >>>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
> >>>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
> >>>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
> >>>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
> >>>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
> >>>  [<c04b09f9>] ? vfs_read+0x8f/0x136
> >>>  [<c04b0da3>] ? sys_read+0x40/0x65
> >>>  [<c0402a68>] ? sysenter_do_call+0x12/0x36
> >>>
> >>> (We can even get other crashes..)
> >>>
> >> Can you send me your full bootlog and config. I'm not able to reproduce 
> >> this.
> > 
> > And the SHA1 of the HEAD of the git repo you are using.
> > 
> > Thanks,
> > 
> 
> the HEAD: 9ce5424d75e56891905b77d1589924765e62059a + this patch
> 
> (I commented out "hi" from the sample module)

I found that commenting out the "hi" too helped in causing races.

> 
> I think it's because "type" is wrapped back to 0. I changed the test script
> like this:
> 
> while (foo_bar.id < 65536)
> {
> 	insmod trace-events-sample.ko
> 	rmmod trace-events-sample.ko
> }
> 
> for ((; ;))
> {
>         insmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
>         echo trace-events-sample:foo_bar > /mnt/tracing/set_event
>         sleep 1
>         cat /mnt/tracing/trace
>         rmmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
> }
> 

Could you try my git repo with my latest changes?

git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git

 branch: rfc/debugfs

Thanks,

-- Steve

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Li Zefan]

(Sorry for the delayed reply)

Steven Rostedt wrote:
> Hi Li,
> 
> 
> On Sun, 26 Apr 2009, Li Zefan wrote:
> 
>> Steven Rostedt wrote:
>>> On Fri, 24 Apr 2009, Steven Rostedt wrote:
>>>
>>>> On Fri, 24 Apr 2009, Li Zefan wrote:
>>>>> console 1:
>>>>>  # cat /debug/tracing/trace_pipe
>>>>>
>>>>> console 2:
>>>>> while (1) {
>>>>> 	insmod trace-events-sample.ko
>>>>> 	echo foo_bar > /debug/tracing/set_event
>>>>> 	rmmod trace-events-sample.ko
>>>>> }
>>>>>
>>>>> I got this immediately:
>>>>>
>>>>> BUG: unable to handle kernel NULL pointer dereference at 0000006f
>>>>> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
>>>>> ...
>>>>> Call Trace:
>>>>>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
>>>>>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
>>>>>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
>>>>>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
>>>>>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
>>>>>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
>>>>>  [<c04b09f9>] ? vfs_read+0x8f/0x136
>>>>>  [<c04b0da3>] ? sys_read+0x40/0x65
>>>>>  [<c0402a68>] ? sysenter_do_call+0x12/0x36
>>>>>
>>>>> (We can even get other crashes..)
>>>>>
>>>> Can you send me your full bootlog and config. I'm not able to reproduce 
>>>> this.
>>> And the SHA1 of the HEAD of the git repo you are using.
>>>
>>> Thanks,
>>>
>> the HEAD: 9ce5424d75e56891905b77d1589924765e62059a + this patch
>>
>> (I commented out "hi" from the sample module)
> 
> I found that commenting out the "hi" too helped in causing races.
> 
>> I think it's because "type" is wrapped back to 0. I changed the test script
>> like this:
>>
>> while (foo_bar.id < 65536)
>> {
>> 	insmod trace-events-sample.ko
>> 	rmmod trace-events-sample.ko
>> }
>>
>> for ((; ;))
>> {
>>         insmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
>>         echo trace-events-sample:foo_bar > /mnt/tracing/set_event
>>         sleep 1
>>         cat /mnt/tracing/trace
>>         rmmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
>> }
>>
> 
> Could you try my git repo with my latest changes?
> 
> git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
> 
>  branch: rfc/debugfs
> 

The bug won't be triggered with your latest changes, but it has nothing
to do with the debugfs patch, it's because this patch:
	"tracing/events: reuse trace event ids after overflow"

But that patch just hides the bug not fixes it.. I thought I explained
the bug clearly. :(

I think the bug is triggered because a wrong trace_event->trace() is called.


Before the above patch:
   id overflowed
 =>foo_bar.id == 6 == TRACE_BPRINT
 =>echo foo_bar > set_event
 =>sleep N secs
 =>rmmod sample
 =>cat trace
   =>trace_bprint_event->trace() is called!!
     =>oops!!!


After the above patch:

   Suppose id 0 ~ 65534 are used, only 65535 is left, and we have 2 different
   sample module trace_event subsystems foo and bar.
 =>insmod foo.ko, and foo.id == 65535
 =>echo foo > set_event
 =>sleep N secs
 =>rmmod foo.ko
 =>insmod bar.ko, and bar.id == 65535
 =>cat trace
   =>bar->trace() will be called on events which were generated by foo!

So is it possible/sane to discard corresponding events from ring buffer when
we unload a module?

Correct me if I'm wrong..

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

On Mon, 4 May 2009, Li Zefan wrote:
> >>>>>  # cat /debug/tracing/trace_pipe
> >>>>>
> >>>>> console 2:
> >>>>> while (1) {
> >>>>> 	insmod trace-events-sample.ko
> >>>>> 	echo foo_bar > /debug/tracing/set_event
> >>>>> 	rmmod trace-events-sample.ko
> >>>>> }
> >>>>>
> >>>>> I got this immediately:
> >>>>>
> >>>>> BUG: unable to handle kernel NULL pointer dereference at 0000006f
> >>>>> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
> >>>>> ...
> >>>>> Call Trace:
> >>>>>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
> >>>>>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
> >>>>>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
> >>>>>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
> >>>>>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
> >>>>>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
> >>>>>  [<c04b09f9>] ? vfs_read+0x8f/0x136
> >>>>>  [<c04b0da3>] ? sys_read+0x40/0x65
> >>>>>  [<c0402a68>] ? sysenter_do_call+0x12/0x36
> >>>>>
> >>>>> (We can even get other crashes..)
> >>>>>
> >>>> Can you send me your full bootlog and config. I'm not able to reproduce 
> >>>> this.
> >>> And the SHA1 of the HEAD of the git repo you are using.
> >>>
> >>> Thanks,
> >>>
> >> the HEAD: 9ce5424d75e56891905b77d1589924765e62059a + this patch
> >>
> >> (I commented out "hi" from the sample module)
> > 
> > I found that commenting out the "hi" too helped in causing races.
> > 
> >> I think it's because "type" is wrapped back to 0. I changed the test script
> >> like this:
> >>
> >> while (foo_bar.id < 65536)
> >> {
> >> 	insmod trace-events-sample.ko
> >> 	rmmod trace-events-sample.ko
> >> }
> >>
> >> for ((; ;))
> >> {
> >>         insmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
> >>         echo trace-events-sample:foo_bar > /mnt/tracing/set_event
> >>         sleep 1
> >>         cat /mnt/tracing/trace
> >>         rmmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
> >> }
> >>
> > 
> > Could you try my git repo with my latest changes?
> > 
> > git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
> > 
> >  branch: rfc/debugfs
> > 
> 
> The bug won't be triggered with your latest changes, but it has nothing
> to do with the debugfs patch, it's because this patch:
> 	"tracing/events: reuse trace event ids after overflow"
> 
> But that patch just hides the bug not fixes it.. I thought I explained
> the bug clearly. :(
> 
> I think the bug is triggered because a wrong trace_event->trace() is called.
> 
> 
> Before the above patch:
>    id overflowed
>  =>foo_bar.id == 6 == TRACE_BPRINT
>  =>echo foo_bar > set_event
>  =>sleep N secs
>  =>rmmod sample
>  =>cat trace
>    =>trace_bprint_event->trace() is called!!
>      =>oops!!!
> 
> 
> After the above patch:
> 
>    Suppose id 0 ~ 65534 are used, only 65535 is left, and we have 2 different
>    sample module trace_event subsystems foo and bar.
>  =>insmod foo.ko, and foo.id == 65535
>  =>echo foo > set_event
>  =>sleep N secs
>  =>rmmod foo.ko
>  =>insmod bar.ko, and bar.id == 65535
>  =>cat trace
>    =>bar->trace() will be called on events which were generated by foo!
> 
> So is it possible/sane to discard corresponding events from ring buffer when
> we unload a module?
> 
> Correct me if I'm wrong..

OK, I understand what you are saying.

You are saying that if we reuse the event id, then there is a case that 
the event can be used by another module, and if we have old data in the 
ring buffer the other module's callback will be called with the previous 
module's data.

Right?


A module should not be storing pointers into the ring buffer. We do 
that with the trace_print, but I think we were suppose to do something 
special if we detect that it is a module being called.

  Frederic?

If the module only stores data and never a pointer, then the worst thing 
stale data would do is show junk.

Scanning the ring buffer and discarding the module data can be very racy. 
We would need to disable the ring buffer while doing this. Probably the 
best thing to do is to simpy reset the ring buffers if it detects that a 
module is being unloaded and has callbacks. The data in the ring buffer is 
garbage anyway, so might as well reset it.

-- Steve

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Li Zefan]

Steven Rostedt wrote:
> On Mon, 4 May 2009, Li Zefan wrote:
>>>>>>>  # cat /debug/tracing/trace_pipe
>>>>>>>
>>>>>>> console 2:
>>>>>>> while (1) {
>>>>>>> 	insmod trace-events-sample.ko
>>>>>>> 	echo foo_bar > /debug/tracing/set_event
>>>>>>> 	rmmod trace-events-sample.ko
>>>>>>> }
>>>>>>>
>>>>>>> I got this immediately:
>>>>>>>
>>>>>>> BUG: unable to handle kernel NULL pointer dereference at 0000006f
>>>>>>> IP: [<c05210f3>] bstr_printf+0x2ce/0x302
>>>>>>> ...
>>>>>>> Call Trace:
>>>>>>>  [<c0476d12>] ? trace_seq_bprintf+0x28/0x41
>>>>>>>  [<c0477569>] ? trace_bprint_print+0x58/0x6c
>>>>>>>  [<c0472ffc>] ? print_trace_line+0x2c5/0x2df
>>>>>>>  [<c0428a41>] ? sub_preempt_count+0x85/0xa0
>>>>>>>  [<c04758cf>] ? tracing_read_pipe+0x118/0x191
>>>>>>>  [<c04757b7>] ? tracing_read_pipe+0x0/0x191
>>>>>>>  [<c04b09f9>] ? vfs_read+0x8f/0x136
>>>>>>>  [<c04b0da3>] ? sys_read+0x40/0x65
>>>>>>>  [<c0402a68>] ? sysenter_do_call+0x12/0x36
>>>>>>>
>>>>>>> (We can even get other crashes..)
>>>>>>>
>>>>>> Can you send me your full bootlog and config. I'm not able to reproduce 
>>>>>> this.
>>>>> And the SHA1 of the HEAD of the git repo you are using.
>>>>>
>>>>> Thanks,
>>>>>
>>>> the HEAD: 9ce5424d75e56891905b77d1589924765e62059a + this patch
>>>>
>>>> (I commented out "hi" from the sample module)
>>> I found that commenting out the "hi" too helped in causing races.
>>>
>>>> I think it's because "type" is wrapped back to 0. I changed the test script
>>>> like this:
>>>>
>>>> while (foo_bar.id < 65536)
>>>> {
>>>> 	insmod trace-events-sample.ko
>>>> 	rmmod trace-events-sample.ko
>>>> }
>>>>
>>>> for ((; ;))
>>>> {
>>>>         insmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
>>>>         echo trace-events-sample:foo_bar > /mnt/tracing/set_event
>>>>         sleep 1
>>>>         cat /mnt/tracing/trace
>>>>         rmmod /home/lizf/linux-2.6-tip/samples/trace_events/*.ko
>>>> }
>>>>
>>> Could you try my git repo with my latest changes?
>>>
>>> git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace.git
>>>
>>>  branch: rfc/debugfs
>>>
>> The bug won't be triggered with your latest changes, but it has nothing
>> to do with the debugfs patch, it's because this patch:
>> 	"tracing/events: reuse trace event ids after overflow"
>>
>> But that patch just hides the bug not fixes it.. I thought I explained
>> the bug clearly. :(
>>
>> I think the bug is triggered because a wrong trace_event->trace() is called.
>>
>>
>> Before the above patch:
>>    id overflowed
>>  =>foo_bar.id == 6 == TRACE_BPRINT
>>  =>echo foo_bar > set_event
>>  =>sleep N secs
>>  =>rmmod sample
>>  =>cat trace
>>    =>trace_bprint_event->trace() is called!!
>>      =>oops!!!
>>
>>
>> After the above patch:
>>
>>    Suppose id 0 ~ 65534 are used, only 65535 is left, and we have 2 different
>>    sample module trace_event subsystems foo and bar.
>>  =>insmod foo.ko, and foo.id == 65535
>>  =>echo foo > set_event
>>  =>sleep N secs
>>  =>rmmod foo.ko
>>  =>insmod bar.ko, and bar.id == 65535
>>  =>cat trace
>>    =>bar->trace() will be called on events which were generated by foo!
>>
>> So is it possible/sane to discard corresponding events from ring buffer when
>> we unload a module?
>>
>> Correct me if I'm wrong..
> 
> OK, I understand what you are saying.
> 
> You are saying that if we reuse the event id, then there is a case that 
> the event can be used by another module, and if we have old data in the 
> ring buffer the other module's callback will be called with the previous 
> module's data.
> 
> Right?
> 

You got it. :)

> 
> A module should not be storing pointers into the ring buffer. We do 
> that with the trace_print, but I think we were suppose to do something 
> special if we detect that it is a module being called.
> 
>   Frederic?
> 
> If the module only stores data and never a pointer, then the worst thing 
> stale data would do is show junk.
> 
> Scanning the ring buffer and discarding the module data can be very racy. 
> We would need to disable the ring buffer while doing this. Probably the 
> best thing to do is to simpy reset the ring buffers if it detects that a 
> module is being unloaded and has callbacks. The data in the ring buffer is 
> garbage anyway, so might as well reset it.
> 

I agree, if no better way.

[tip:tracing/core] tracing: reset ring buffer when removing modules with events

[tip-bot for Steven Rostedt]

Commit-ID:  9456f0fa6d3cb944d3b9fc31c9a244e0362c26ea
Gitweb:     http://git.kernel.org/tip/9456f0fa6d3cb944d3b9fc31c9a244e0362c26ea
Author:     Steven Rostedt <srostedt@redhat.com>
AuthorDate: Wed, 6 May 2009 21:54:09 -0400
Committer:  Steven Rostedt <rostedt@goodmis.org>
CommitDate: Wed, 6 May 2009 23:11:41 -0400

tracing: reset ring buffer when removing modules with events

Li Zefan found that there's a race using the event ids of events and
modules. When a module is loaded, an event id is incremented. We only
have 16 bits for event ids (65536) and there is a possible (but highly
unlikely) race that we could load and unload a module that registers
events so many times that the event id counter overflows.

When it overflows, it then restarts and goes looking for available
ids. An id is available if it was added by a module and released.

The race is if you have one module add an id, and then is removed.
Another module loaded can use that same event id. But if the old module
still had events in the ring buffer, the new module's call back would
get bogus data.  At best (and most likely) the output would just be
garbage. But if the module for some reason used pointers (not recommended)
then this could potentially crash.

The safest thing to do is just reset the ring buffer if a module that
registered events is removed.

[ Impact: prevent unpredictable results of event id overflows ]

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <49FEAFD0.30106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>


---
 kernel/trace/trace.c        |   10 ++++++++++
 kernel/trace/trace.h        |    2 ++
 kernel/trace/trace_events.c |    9 +++++++++
 3 files changed, 21 insertions(+), 0 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 4164a34..dd40d23 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -639,6 +639,16 @@ void tracing_reset_online_cpus(struct trace_array *tr)
 		tracing_reset(tr, cpu);
 }
 
+void tracing_reset_current(int cpu)
+{
+	tracing_reset(&global_trace, cpu);
+}
+
+void tracing_reset_current_online_cpus(void)
+{
+	tracing_reset_online_cpus(&global_trace);
+}
+
 #define SAVED_CMDLINES 128
 #define NO_CMDLINE_MAP UINT_MAX
 static unsigned map_pid_to_cmdline[PID_MAX_DEFAULT+1];
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 777c6c3..ba25793 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -409,6 +409,8 @@ int tracing_is_enabled(void);
 void trace_wake_up(void);
 void tracing_reset(struct trace_array *tr, int cpu);
 void tracing_reset_online_cpus(struct trace_array *tr);
+void tracing_reset_current(int cpu);
+void tracing_reset_current_online_cpus(void);
 int tracing_open_generic(struct inode *inode, struct file *filp);
 struct dentry *trace_create_file(const char *name,
 				 mode_t mode,
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 8d579ff..6d2c842 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -932,9 +932,11 @@ static void trace_module_remove_events(struct module *mod)
 {
 	struct ftrace_module_file_ops *file_ops;
 	struct ftrace_event_call *call, *p;
+	bool found = false;
 
 	list_for_each_entry_safe(call, p, &ftrace_events, list) {
 		if (call->mod == mod) {
+			found = true;
 			if (call->enabled) {
 				call->enabled = 0;
 				call->unregfunc();
@@ -957,6 +959,13 @@ static void trace_module_remove_events(struct module *mod)
 		list_del(&file_ops->list);
 		kfree(file_ops);
 	}
+
+	/*
+	 * It is safest to reset the ring buffer if the module being unloaded
+	 * registered any events.
+	 */
+	if (found)
+		tracing_reset_current_online_cpus();
 }
 
 static int trace_module_notify(struct notifier_block *self,

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Ingo Molnar]

* Steven Rostedt <rostedt@goodmis.org> wrote:

> From: Steven Rostedt <srostedt@redhat.com>
> 
> With the new event tracing registration, we must increase the number
> of events that can be registered. Currently the type field is only
> one byte, which leaves us only 256 possible events.
> 
> Since we do not save the CPU number in the tracer anymore (it is determined
> by the per cpu ring buffer that is used) we have an extra byte to use.
> 
> This patch increases the size of type from 1 byte (256 events) to
> 2 bytes (65,536 events).
> 
> It also adds a WARN_ON_ONCE if we exceed that limit.
> 
> [ Impact: allow more than 255 events ]

> -	int			type;
> +	unsigned short		type;

Hm, the changelog is not valid anymore - as here we really cut it 
down from 4 billion to 64K, right?

	Ingo

Re: [PATCH 2/6] tracing: increase size of number of possible events

[Steven Rostedt]

On Fri, 24 Apr 2009, Ingo Molnar wrote:

> 
> * Steven Rostedt <rostedt@goodmis.org> wrote:
> 
> > From: Steven Rostedt <srostedt@redhat.com>
> > 
> > With the new event tracing registration, we must increase the number
> > of events that can be registered. Currently the type field is only
> > one byte, which leaves us only 256 possible events.
> > 
> > Since we do not save the CPU number in the tracer anymore (it is determined
> > by the per cpu ring buffer that is used) we have an extra byte to use.
> > 
> > This patch increases the size of type from 1 byte (256 events) to
> > 2 bytes (65,536 events).
> > 
> > It also adds a WARN_ON_ONCE if we exceed that limit.
> > 
> > [ Impact: allow more than 255 events ]
> 
> > -	int			type;
> > +	unsigned short		type;
> 
> Hm, the changelog is not valid anymore - as here we really cut it 
> down from 4 billion to 64K, right?

[ Impact: wrong changelog due to forward port of patch ]

;-)

-- Steve

[PATCH 3/6] tracing: add size checks for exported ftrace internal structures

[Steven Rostedt]

[-- Attachment #1: 0003-tracing-add-size-checks-for-exported-ftrace-interna.patch --]
[-- Type: text/plain, Size: 1958 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

The events exported by TRACE_EVENT are automated and are guaranteed
to be correct when used.

The internal ftrace structures on the other hand are more manually
exported. These require the ftrace maintainer to make sure they
are up to date.

This patch adds a size check to help flag when a type changes in
an internal ftrace data structure, and the update needs to be reflected
in the export.

If a export is incorrect, then the only harm is that the user space
tools will not know how to correctly read the internal structures of
ftrace.

[ Impact: help prevent inconsistent ftrace format print outs ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
---
 kernel/trace/trace_events.c |    3 +++
 kernel/trace/trace_export.c |    4 ++++
 2 files changed, 7 insertions(+), 0 deletions(-)

diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 9887131..b920815 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -381,8 +381,11 @@ event_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
 	return cnt;
 }
 
+extern char *__bad_type_size(void);
+
 #undef FIELD
 #define FIELD(type, name)						\
+	sizeof(type) != sizeof(field.name) ? __bad_type_size() :	\
 	#type, "common_" #name, offsetof(typeof(field), name),		\
 		sizeof(field.name)
 
diff --git a/kernel/trace/trace_export.c b/kernel/trace/trace_export.c
index 48fc02f..0cb1a14 100644
--- a/kernel/trace/trace_export.c
+++ b/kernel/trace/trace_export.c
@@ -19,8 +19,12 @@
 #undef TRACE_STRUCT
 #define TRACE_STRUCT(args...) args
 
+extern void __bad_type_size(void);
+
 #undef TRACE_FIELD
 #define TRACE_FIELD(type, item, assign)					\
+	if (sizeof(type) != sizeof(field.item))				\
+		__bad_type_size();					\
 	ret = trace_seq_printf(s, "\tfield:" #type " " #item ";\t"	\
 			       "offset:%u;\tsize:%u;\n",		\
 			       (unsigned int)offsetof(typeof(field), item), \
-- 
1.6.2.1

-- 

[PATCH 4/6] x86: use native register access for native tlb flushing

[Steven Rostedt]

[-- Attachment #1: 0004-x86-use-native-register-access-for-native-tlb-flush.patch --]
[-- Type: text/plain, Size: 1285 bytes --]

From: Chris Wright <chrisw@sous-sol.org>

currently these are paravirtulaized, doesn't appear any callers rely on
this (no pv_ops backends are using native_tlb and overriding cr3/4
access).

[ Impact: fix lockdep warning with paravirt and function tracer ]

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
LKML-Reference: <20090423172138.GR3036@sequoia.sous-sol.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 arch/x86/include/asm/tlbflush.h |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h
index d3539f9..e2927c5 100644
--- a/arch/x86/include/asm/tlbflush.h
+++ b/arch/x86/include/asm/tlbflush.h
@@ -17,7 +17,7 @@
 
 static inline void __native_flush_tlb(void)
 {
-	write_cr3(read_cr3());
+	native_write_cr3(native_read_cr3());
 }
 
 static inline void __native_flush_tlb_global(void)
@@ -32,11 +32,11 @@ static inline void __native_flush_tlb_global(void)
 	 */
 	raw_local_irq_save(flags);
 
-	cr4 = read_cr4();
+	cr4 = native_read_cr4();
 	/* clear PGE */
-	write_cr4(cr4 & ~X86_CR4_PGE);
+	native_write_cr4(cr4 & ~X86_CR4_PGE);
 	/* write old PGE again and flush TLBs */
-	write_cr4(cr4);
+	native_write_cr4(cr4);
 
 	raw_local_irq_restore(flags);
 }
-- 
1.6.2.1

-- 

[PATCH 5/6] tracing: fix cut and paste macro error

[Steven Rostedt]

[-- Attachment #1: 0005-tracing-fix-cut-and-paste-macro-error.patch --]
[-- Type: text/plain, Size: 2216 bytes --]

From: Steven Rostedt <srostedt@redhat.com>

In case a module uses the TRACE_EVENT macro for creating automated
events in ftrace, it may choose to use a different file name
than the defined system name, or choose to use a different path than
the default "include/trace/events" include path.

If this is done, then before including trace/define_trace.h the
header would define either "TRACE_INCLUDE_FILE" for the file
name or "TRACE_INCLUDE_PATH" for the include path.

If it does not define these, then the define_trace.h defines them
instead. If define trace defines them, then define_trace.h should
also undefine them before exiting. To do this a macro is used
to note this:

 #ifndef TRACE_INCLUDE_FILE
 # define TRACE_INCLUDE_FILE TRACE_SYSTEM
 # define UNDEF_TRACE_INCLUDE_FILE
 #endif

[...]

 #ifdef UNDEF_TRACE_INCLUDE_FILE
 # undef TRACE_INCLUDE_FILE
 # undef UNDEF_TRACE_INCLUDE_FILE
 #endif

The UNDEF_TRACE_INCLUDE_FILE acts as a CPP variable to know to undef
the TRACE_INCLUDE_FILE before leaving define_trace.h.

Unfortunately, due to cut and paste errors, the macros between
FILE and PATH got mixed up.

[ Impact: undef TRACE_INCLUDE_FILE and/or TRACE_INCLUDE_PATH when needed ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 include/trace/define_trace.h |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/include/trace/define_trace.h b/include/trace/define_trace.h
index 7f1f23d..abc611f 100644
--- a/include/trace/define_trace.h
+++ b/include/trace/define_trace.h
@@ -44,7 +44,7 @@
 
 #ifndef TRACE_INCLUDE_PATH
 # define __TRACE_INCLUDE(system) <trace/events/system.h>
-# define UNDEF_TRACE_INCLUDE_FILE
+# define UNDEF_TRACE_INCLUDE_PATH
 #else
 # define __TRACE_INCLUDE(system) __stringify(TRACE_INCLUDE_PATH/system.h)
 #endif
@@ -64,13 +64,13 @@
 
 /* Only undef what we defined in this file */
 #ifdef UNDEF_TRACE_INCLUDE_FILE
-# undef TRACE_INCLUDE_PATH
+# undef TRACE_INCLUDE_FILE
 # undef UNDEF_TRACE_INCLUDE_FILE
 #endif
 
-#ifdef UNDEF_TRACE_INCLUDE_FILE
+#ifdef UNDEF_TRACE_INCLUDE_PATH
 # undef TRACE_INCLUDE_PATH
-# undef UNDEF_TRACE_INCLUDE_FILE
+# undef UNDEF_TRACE_INCLUDE_PATH
 #endif
 
 /* We may be processing more files */
-- 
1.6.2.1

-- 

[PATCH 6/6] ring_buffer: compressed event header

[Steven Rostedt]

[-- Attachment #1: 0006-ring_buffer-compressed-event-header.patch --]
[-- Type: text/plain, Size: 11120 bytes --]

From: Lai Jiangshan <laijs@cn.fujitsu.com>

RB_MAX_SMALL_DATA = 28bytes is too small for most tracers, it wastes
an 'u32' to save the actually length for events which data size > 28.

This fix uses compressed event header and enlarges RB_MAX_SMALL_DATA.

[ Impact: saves about 0%-12.5%(depends on tracer) memory in ring_buffer ]

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <49F13189.3090000@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
---
 include/linux/ring_buffer.h |   16 +++++----
 kernel/trace/ring_buffer.c  |   83 +++++++++++++++++++++----------------------
 2 files changed, 50 insertions(+), 49 deletions(-)

diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index fac8f1a..1c2f809 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -11,7 +11,7 @@ struct ring_buffer_iter;
  * Don't refer to this struct directly, use functions below.
  */
 struct ring_buffer_event {
-	u32		type:2, len:3, time_delta:27;
+	u32		type_len:5, time_delta:27;
 	u32		array[];
 };
 
@@ -24,7 +24,8 @@ struct ring_buffer_event {
  *				  size is variable depending on how much
  *				  padding is needed
  *				 If time_delta is non zero:
- *				  everything else same as RINGBUF_TYPE_DATA
+ *				  array[0] holds the actual length
+ *				  size = 4 + length (bytes)
  *
  * @RINGBUF_TYPE_TIME_EXTEND:	Extend the time delta
  *				 array[0] = time delta (28 .. 59)
@@ -35,22 +36,23 @@ struct ring_buffer_event {
  *				 array[1..2] = tv_sec
  *				 size = 16 bytes
  *
- * @RINGBUF_TYPE_DATA:		Data record
- *				 If len is zero:
+ * <= @RINGBUF_TYPE_DATA_TYPE_LEN_MAX:
+ *				Data record
+ *				 If type_len is zero:
  *				  array[0] holds the actual length
  *				  array[1..(length+3)/4] holds data
- *				  size = 4 + 4 + length (bytes)
+ *				  size = 4 + length (bytes)
  *				 else
- *				  length = len << 2
+ *				  length = type_len << 2
  *				  array[0..(length+3)/4-1] holds data
  *				  size = 4 + length (bytes)
  */
 enum ring_buffer_type {
+	RINGBUF_TYPE_DATA_TYPE_LEN_MAX = 28,
 	RINGBUF_TYPE_PADDING,
 	RINGBUF_TYPE_TIME_EXTEND,
 	/* FIXME: RINGBUF_TYPE_TIME_STAMP not implemented */
 	RINGBUF_TYPE_TIME_STAMP,
-	RINGBUF_TYPE_DATA,
 };
 
 unsigned ring_buffer_event_length(struct ring_buffer_event *event);
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index 61dbdf2..9692f10 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -28,8 +28,8 @@ int ring_buffer_print_entry_header(struct trace_seq *s)
 {
 	int ret;
 
-	ret = trace_seq_printf(s, "\ttype        :    2 bits\n");
-	ret = trace_seq_printf(s, "\tlen         :    3 bits\n");
+	ret = trace_seq_printf(s, "# compressed entry header\n");
+	ret = trace_seq_printf(s, "\ttype_len    :    5 bits\n");
 	ret = trace_seq_printf(s, "\ttime_delta  :   27 bits\n");
 	ret = trace_seq_printf(s, "\tarray       :   32 bits\n");
 	ret = trace_seq_printf(s, "\n");
@@ -37,8 +37,8 @@ int ring_buffer_print_entry_header(struct trace_seq *s)
 			       RINGBUF_TYPE_PADDING);
 	ret = trace_seq_printf(s, "\ttime_extend : type == %d\n",
 			       RINGBUF_TYPE_TIME_EXTEND);
-	ret = trace_seq_printf(s, "\tdata        : type == %d\n",
-			       RINGBUF_TYPE_DATA);
+	ret = trace_seq_printf(s, "\tdata max type_len  == %d\n",
+			       RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
 
 	return ret;
 }
@@ -204,7 +204,10 @@ EXPORT_SYMBOL_GPL(tracing_is_on);
 
 #define RB_EVNT_HDR_SIZE (offsetof(struct ring_buffer_event, array))
 #define RB_ALIGNMENT		4U
-#define RB_MAX_SMALL_DATA	28
+#define RB_MAX_SMALL_DATA	(RB_ALIGNMENT * RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
+
+/* define RINGBUF_TYPE_DATA for 'case RINGBUF_TYPE_DATA:' */
+#define RINGBUF_TYPE_DATA 0 ... RINGBUF_TYPE_DATA_TYPE_LEN_MAX
 
 enum {
 	RB_LEN_TIME_EXTEND = 8,
@@ -213,17 +216,18 @@ enum {
 
 static inline int rb_null_event(struct ring_buffer_event *event)
 {
-	return event->type == RINGBUF_TYPE_PADDING && event->time_delta == 0;
+	return event->type_len == RINGBUF_TYPE_PADDING
+			&& event->time_delta == 0;
 }
 
 static inline int rb_discarded_event(struct ring_buffer_event *event)
 {
-	return event->type == RINGBUF_TYPE_PADDING && event->time_delta;
+	return event->type_len == RINGBUF_TYPE_PADDING && event->time_delta;
 }
 
 static void rb_event_set_padding(struct ring_buffer_event *event)
 {
-	event->type = RINGBUF_TYPE_PADDING;
+	event->type_len = RINGBUF_TYPE_PADDING;
 	event->time_delta = 0;
 }
 
@@ -232,8 +236,8 @@ rb_event_data_length(struct ring_buffer_event *event)
 {
 	unsigned length;
 
-	if (event->len)
-		length = event->len * RB_ALIGNMENT;
+	if (event->type_len)
+		length = event->type_len * RB_ALIGNMENT;
 	else
 		length = event->array[0];
 	return length + RB_EVNT_HDR_SIZE;
@@ -243,12 +247,12 @@ rb_event_data_length(struct ring_buffer_event *event)
 static unsigned
 rb_event_length(struct ring_buffer_event *event)
 {
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		if (rb_null_event(event))
 			/* undefined */
 			return -1;
-		return rb_event_data_length(event);
+		return  event->array[0] + RB_EVNT_HDR_SIZE;
 
 	case RINGBUF_TYPE_TIME_EXTEND:
 		return RB_LEN_TIME_EXTEND;
@@ -272,7 +276,7 @@ rb_event_length(struct ring_buffer_event *event)
 unsigned ring_buffer_event_length(struct ring_buffer_event *event)
 {
 	unsigned length = rb_event_length(event);
-	if (event->type != RINGBUF_TYPE_DATA)
+	if (event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
 		return length;
 	length -= RB_EVNT_HDR_SIZE;
 	if (length > RB_MAX_SMALL_DATA + sizeof(event->array[0]))
@@ -285,9 +289,9 @@ EXPORT_SYMBOL_GPL(ring_buffer_event_length);
 static void *
 rb_event_data(struct ring_buffer_event *event)
 {
-	BUG_ON(event->type != RINGBUF_TYPE_DATA);
+	BUG_ON(event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX);
 	/* If length is in len field, then array[0] has the data */
-	if (event->len)
+	if (event->type_len)
 		return (void *)&event->array[0];
 	/* Otherwise length is in array[0] and array[1] has the data */
 	return (void *)&event->array[1];
@@ -988,7 +992,7 @@ static void rb_update_overflow(struct ring_buffer_per_cpu *cpu_buffer)
 		if (RB_WARN_ON(cpu_buffer, rb_null_event(event)))
 			return;
 		/* Only count data entries */
-		if (event->type != RINGBUF_TYPE_DATA)
+		if (event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
 			continue;
 		cpu_buffer->overrun++;
 		cpu_buffer->entries--;
@@ -1133,28 +1137,21 @@ static void
 rb_update_event(struct ring_buffer_event *event,
 			 unsigned type, unsigned length)
 {
-	event->type = type;
+	event->type_len = type;
 
 	switch (type) {
 
 	case RINGBUF_TYPE_PADDING:
-		break;
-
 	case RINGBUF_TYPE_TIME_EXTEND:
-		event->len = DIV_ROUND_UP(RB_LEN_TIME_EXTEND, RB_ALIGNMENT);
-		break;
-
 	case RINGBUF_TYPE_TIME_STAMP:
-		event->len = DIV_ROUND_UP(RB_LEN_TIME_STAMP, RB_ALIGNMENT);
 		break;
 
-	case RINGBUF_TYPE_DATA:
+	case 0:
 		length -= RB_EVNT_HDR_SIZE;
-		if (length > RB_MAX_SMALL_DATA) {
-			event->len = 0;
+		if (length > RB_MAX_SMALL_DATA)
 			event->array[0] = length;
-		} else
-			event->len = DIV_ROUND_UP(length, RB_ALIGNMENT);
+		else
+			event->type_len = DIV_ROUND_UP(length, RB_ALIGNMENT);
 		break;
 	default:
 		BUG();
@@ -1562,7 +1559,7 @@ ring_buffer_lock_reserve(struct ring_buffer *buffer, unsigned long length)
 	if (length > BUF_PAGE_SIZE)
 		goto out;
 
-	event = rb_reserve_next_event(cpu_buffer, RINGBUF_TYPE_DATA, length);
+	event = rb_reserve_next_event(cpu_buffer, 0, length);
 	if (!event)
 		goto out;
 
@@ -1634,7 +1631,9 @@ EXPORT_SYMBOL_GPL(ring_buffer_unlock_commit);
 
 static inline void rb_event_discard(struct ring_buffer_event *event)
 {
-	event->type = RINGBUF_TYPE_PADDING;
+	/* array[0] holds the actual length for the discarded event */
+	event->array[0] = rb_event_data_length(event) - RB_EVNT_HDR_SIZE;
+	event->type_len = RINGBUF_TYPE_PADDING;
 	/* time delta must be non zero */
 	if (!event->time_delta)
 		event->time_delta = 1;
@@ -1786,8 +1785,7 @@ int ring_buffer_write(struct ring_buffer *buffer,
 		goto out;
 
 	event_length = rb_calculate_event_length(length);
-	event = rb_reserve_next_event(cpu_buffer,
-				      RINGBUF_TYPE_DATA, event_length);
+	event = rb_reserve_next_event(cpu_buffer, 0, event_length);
 	if (!event)
 		goto out;
 
@@ -2035,7 +2033,7 @@ rb_update_read_stamp(struct ring_buffer_per_cpu *cpu_buffer,
 {
 	u64 delta;
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		return;
 
@@ -2066,7 +2064,7 @@ rb_update_iter_read_stamp(struct ring_buffer_iter *iter,
 {
 	u64 delta;
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		return;
 
@@ -2181,7 +2179,8 @@ static void rb_advance_reader(struct ring_buffer_per_cpu *cpu_buffer)
 
 	event = rb_reader_event(cpu_buffer);
 
-	if (event->type == RINGBUF_TYPE_DATA || rb_discarded_event(event))
+	if (event->type_len <= RINGBUF_TYPE_DATA_TYPE_LEN_MAX
+			|| rb_discarded_event(event))
 		cpu_buffer->entries--;
 
 	rb_update_read_stamp(cpu_buffer, event);
@@ -2262,7 +2261,7 @@ rb_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 
 	event = rb_reader_event(cpu_buffer);
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		if (rb_null_event(event))
 			RB_WARN_ON(cpu_buffer, 1);
@@ -2334,7 +2333,7 @@ rb_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 
 	event = rb_iter_head_event(iter);
 
-	switch (event->type) {
+	switch (event->type_len) {
 	case RINGBUF_TYPE_PADDING:
 		if (rb_null_event(event)) {
 			rb_inc_iter(iter);
@@ -2393,7 +2392,7 @@ ring_buffer_peek(struct ring_buffer *buffer, int cpu, u64 *ts)
 	event = rb_buffer_peek(buffer, cpu, ts);
 	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2421,7 +2420,7 @@ ring_buffer_iter_peek(struct ring_buffer_iter *iter, u64 *ts)
 	event = rb_iter_peek(iter, ts);
 	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2466,7 +2465,7 @@ ring_buffer_consume(struct ring_buffer *buffer, int cpu, u64 *ts)
  out:
 	preempt_enable();
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2559,7 +2558,7 @@ ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts)
  out:
 	spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
 
-	if (event && event->type == RINGBUF_TYPE_PADDING) {
+	if (event && event->type_len == RINGBUF_TYPE_PADDING) {
 		cpu_relax();
 		goto again;
 	}
@@ -2766,7 +2765,7 @@ static void rb_remove_entries(struct ring_buffer_per_cpu *cpu_buffer,
 		if (RB_WARN_ON(cpu_buffer, rb_null_event(event)))
 			return;
 		/* Only count data entries */
-		if (event->type != RINGBUF_TYPE_DATA)
+		if (event->type_len > RINGBUF_TYPE_DATA_TYPE_LEN_MAX)
 			continue;
 		cpu_buffer->entries--;
 	}
-- 
1.6.2.1

--