Re: cpuspeed vs x

[Ed Tomlinson <edt@aei.ca>]

On Saturday 02 May 2009 22:01:36 Gene Heskett wrote:
> Greetings all;
> 
> I'm not sure where I should send this.
> 
> When 30-rc4 came out, I built it, but this time I enabled the cpuspeed 
> governor stuffs, picking middle of the road options just to see if I could 
> feel any difference on this quad core phenom.
> 
> Booted up just fine, and ran till I left long enough for the blank screen & 
> monitor powerdown to take place.  An hour later I come in and jog the mouse to 
> wake things up & 30 seconds later its still blanked but I can see the lcd's 
> backlight is on, so I poke a few keys and I think the screen may have blinked 
> on for maybe one frame once.
> 
> Ctl-alt-bsp, terminal screen is fine, and startx works.  An hour later, whole 
> machine is powered down while I'm elsewhere again.  I fool with this, trying 
> to make sense of it for another half a day, then reboot to -rc3 and rebuild 
> -rc4 without that option, and something around 24 hours later it is still just 
> fine.
> 
> Is this a kernel problem, or an x problem?

rc4 has been unstable here with the same setup used with rc3.   An rc4 kernel
will not stay up 8 hours - rc3 would last days.  Stall symptoms differ.  Sometimes
X stalls, other times X will not respond but the cursor can be moved.  The strangest
was one that happened with X down.  In this case sysrq would not output anything
other than the title for the function requested...

I am not sure how to go about getting good debug info for this one.

I am using gentoo on amd64 (a 8450 on 790gx based mb) with gcc 4.3.3

Ed