From: Jarod Wilson <jarod@redhat.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
Neil Horman <nhorman@tuxdriver.com>
Subject: [PATCH] crypto: add ctr(aes) test vectors
Date: Mon, 4 May 2009 16:24:44 -0400 [thread overview]
Message-ID: <200905041624.45060.jarod@redhat.com> (raw)
In-Reply-To: <20090504111010.GA4991@gondor.apana.org.au>
On Monday 04 May 2009 07:10:10 Herbert Xu wrote:
> On Tue, Apr 28, 2009 at 09:18:22PM -0400, Jarod Wilson wrote:
> > Per the NIST AESAVS document, Appendix A[1], it isn't possible to
> > have automated self-tests for counter-mode AES, but people are
> > misled to believe something is wrong by the message that says there
> > is no test for ctr(aes). Simply suppress all 'no test for ctr(aes*'
> > messages if fips_enabled is set to avoid confusion.
>
> This is not true at all. In our implementation the counter is
> set through the IV so it definitely is possible to test counter
> mode algorithms in Linux.
Indeed, the first enc/dec operation after we set the counter *is*
completely deterministic across all implementations, the AESAVS
is referring to tests with multiple operations, which aren't
possible, due to varying implementations of counter increment
routines. This patch adds test vectors for ctr(aes), using the
first block input values from Appendix F.5 of NIST Special Pub
800-38A.
Was also necessary to rename the rfc3686(ctr(aes)) components
slightly, to resolve a namespace collision.
Signed-off-by: Jarod Wilson <jarod@redhat.com>
---
crypto/testmgr.c | 23 +++++++++++--
crypto/testmgr.h | 92 ++++++++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 109 insertions(+), 6 deletions(-)
diff --git a/crypto/testmgr.c b/crypto/testmgr.c
index ffe7963..0efdda7 100644
--- a/crypto/testmgr.c
+++ b/crypto/testmgr.c
@@ -1518,6 +1518,21 @@ static const struct alg_test_desc alg_test_descs[] = {
}
}
}, {
+ .alg = "ctr(aes)",
+ .test = alg_test_skcipher,
+ .suite = {
+ .cipher = {
+ .enc = {
+ .vecs = aes_ctr_enc_tv_template,
+ .count = AES_CTR_ENC_TEST_VECTORS
+ },
+ .dec = {
+ .vecs = aes_ctr_dec_tv_template,
+ .count = AES_CTR_DEC_TEST_VECTORS
+ }
+ }
+ }
+ }, {
.alg = "cts(cbc(aes))",
.test = alg_test_skcipher,
.suite = {
@@ -1967,12 +1982,12 @@ static const struct alg_test_desc alg_test_descs[] = {
.suite = {
.cipher = {
.enc = {
- .vecs = aes_ctr_enc_tv_template,
- .count = AES_CTR_ENC_TEST_VECTORS
+ .vecs = aes_ctr_rfc3686_enc_tv_template,
+ .count = AES_CTR_3686_ENC_TEST_VECTORS
},
.dec = {
- .vecs = aes_ctr_dec_tv_template,
- .count = AES_CTR_DEC_TEST_VECTORS
+ .vecs = aes_ctr_rfc3686_dec_tv_template,
+ .count = AES_CTR_3686_DEC_TEST_VECTORS
}
}
}
diff --git a/crypto/testmgr.h b/crypto/testmgr.h
index c1c709b..0a11285 100644
--- a/crypto/testmgr.h
+++ b/crypto/testmgr.h
@@ -2854,8 +2854,10 @@ static struct cipher_testvec cast6_dec_tv_template[] = {
#define AES_LRW_DEC_TEST_VECTORS 8
#define AES_XTS_ENC_TEST_VECTORS 4
#define AES_XTS_DEC_TEST_VECTORS 4
-#define AES_CTR_ENC_TEST_VECTORS 7
-#define AES_CTR_DEC_TEST_VECTORS 6
+#define AES_CTR_ENC_TEST_VECTORS 3
+#define AES_CTR_DEC_TEST_VECTORS 3
+#define AES_CTR_3686_ENC_TEST_VECTORS 7
+#define AES_CTR_3686_DEC_TEST_VECTORS 6
#define AES_GCM_ENC_TEST_VECTORS 9
#define AES_GCM_DEC_TEST_VECTORS 8
#define AES_CCM_ENC_TEST_VECTORS 7
@@ -3998,6 +4000,92 @@ static struct cipher_testvec aes_xts_dec_tv_template[] = {
static struct cipher_testvec aes_ctr_enc_tv_template[] = {
+ { /* From NIST Special Publication 800-38A, Appendix F.5 */
+ .key = "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+ "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+ .klen = 16,
+ .iv = "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+ "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+ .input = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a",
+ .ilen = 16,
+ .result = "\x87\x4d\x61\x91\xb6\x20\xe3\x26"
+ "\x1b\xef\x68\x64\x99\x0d\xb6\xce",
+ .rlen = 16,
+ }, {
+ .key = "\x8e\x73\xb0\xf7\xda\x0e\x64\x52"
+ "\xc8\x10\xf3\x2b\x80\x90\x79\xe5"
+ "\x62\xf8\xea\xd2\x52\x2c\x6b\x7b",
+ .klen = 24,
+ .iv = "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+ "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+ .input = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a",
+ .ilen = 16,
+ .result = "\x1a\xbc\x93\x24\x17\x52\x1c\xa2"
+ "\x4f\x2b\x04\x59\xfe\x7e\x6e\x0b",
+ .rlen = 16,
+ }, {
+ .key = "\x60\x3d\xeb\x10\x15\xca\x71\xbe"
+ "\x2b\x73\xae\xf0\x85\x7d\x77\x81"
+ "\x1f\x35\x2c\x07\x3b\x61\x08\xd7"
+ "\x2d\x98\x10\xa3\x09\x14\xdf\xf4",
+ .klen = 32,
+ .iv = "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+ "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+ .input = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a",
+ .ilen = 16,
+ .result = "\x60\x1e\xc3\x13\x77\x57\x89\xa5"
+ "\xb7\xa7\xf5\x04\xbb\xf3\xd2\x28",
+ .rlen = 16,
+ }
+};
+
+static struct cipher_testvec aes_ctr_dec_tv_template[] = {
+ { /* From NIST Special Publication 800-38A, Appendix F.5 */
+ .key = "\x2b\x7e\x15\x16\x28\xae\xd2\xa6"
+ "\xab\xf7\x15\x88\x09\xcf\x4f\x3c",
+ .klen = 16,
+ .iv = "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+ "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+ .input = "\x87\x4d\x61\x91\xb6\x20\xe3\x26"
+ "\x1b\xef\x68\x64\x99\x0d\xb6\xce",
+ .ilen = 16,
+ .result = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a",
+ .rlen = 16,
+ }, {
+ .key = "\x8e\x73\xb0\xf7\xda\x0e\x64\x52"
+ "\xc8\x10\xf3\x2b\x80\x90\x79\xe5"
+ "\x62\xf8\xea\xd2\x52\x2c\x6b\x7b",
+ .klen = 24,
+ .iv = "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+ "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+ .input = "\x1a\xbc\x93\x24\x17\x52\x1c\xa2"
+ "\x4f\x2b\x04\x59\xfe\x7e\x6e\x0b",
+ .ilen = 16,
+ .result = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a",
+ .rlen = 16,
+ }, {
+ .key = "\x60\x3d\xeb\x10\x15\xca\x71\xbe"
+ "\x2b\x73\xae\xf0\x85\x7d\x77\x81"
+ "\x1f\x35\x2c\x07\x3b\x61\x08\xd7"
+ "\x2d\x98\x10\xa3\x09\x14\xdf\xf4",
+ .klen = 32,
+ .iv = "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7"
+ "\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff",
+ .input = "\x60\x1e\xc3\x13\x77\x57\x89\xa5"
+ "\xb7\xa7\xf5\x04\xbb\xf3\xd2\x28",
+ .ilen = 16,
+ .result = "\x6b\xc1\xbe\xe2\x2e\x40\x9f\x96"
+ "\xe9\x3d\x7e\x11\x73\x93\x17\x2a",
+ .rlen = 16,
+ }
+};
+
+static struct cipher_testvec aes_ctr_rfc3686_enc_tv_template[] = {
{ /* From RFC 3686 */
.key = "\xae\x68\x52\xf8\x12\x10\x67\xcc"
"\x4b\xf7\xa5\x76\x55\x77\xf3\x9e"
--
Jarod Wilson
jarod@redhat.com
next prev parent reply other threads:[~2009-05-04 20:25 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-29 1:18 [PATCH] crypto: don't raise alarm for no ctr(aes*) tests in fips mode Jarod Wilson
2009-04-29 10:50 ` Neil Horman
2009-04-29 12:46 ` Jarod Wilson
2009-04-30 21:13 ` [PATCH v2] crypto: don't raise alarm for no ctr(aes) tests Jarod Wilson
2009-05-01 11:54 ` Neil Horman
2009-05-04 11:10 ` [PATCH] crypto: don't raise alarm for no ctr(aes*) tests in fips mode Herbert Xu
2009-05-04 18:56 ` Jarod Wilson
2009-05-05 1:08 ` Herbert Xu
2009-05-05 3:45 ` Jarod Wilson
2009-05-05 5:29 ` Herbert Xu
2009-05-05 13:04 ` Jarod Wilson
2009-05-04 20:24 ` Jarod Wilson [this message]
2009-05-05 13:18 ` [PATCH] crypto: add ctr(aes) test vectors Herbert Xu
2009-05-05 13:55 ` Jarod Wilson
2009-05-05 14:42 ` [PATCH v2] " Jarod Wilson
2009-05-06 9:30 ` Herbert Xu
2009-05-06 12:51 ` Jarod Wilson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200905041624.45060.jarod@redhat.com \
--to=jarod@redhat.com \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox