From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755259AbZEHPVV (ORCPT ); Fri, 8 May 2009 11:21:21 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753651AbZEHPVK (ORCPT ); Fri, 8 May 2009 11:21:10 -0400 Received: from zone0.gcu-squad.org ([212.85.147.21]:1501 "EHLO services.gcu-squad.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754300AbZEHPVI (ORCPT ); Fri, 8 May 2009 11:21:08 -0400 Date: Fri, 8 May 2009 17:21:00 +0200 From: Jean Delvare To: Antonino Daplas Cc: inux-fbdev-devel@lists.sourceforge.net, LKML , Andrew Morton Subject: |PATCH] fbdev: Remove outdated advice about I2C configuration Message-ID: <20090508172100.1f010efc@hyperion.delvare> X-Mailer: Claws Mail 3.5.0 (GTK+ 2.14.4; x86_64-suse-linux-gnu) Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org The required I2C modules are now selected automatically by the means of select statements in Kconfig, so there is no point in confusing the users with options he/she would be supposed to enable manually. Signed-off-by: Jean Delvare Cc: Antonino Daplas --- Already sent on: * 2009-3-24 drivers/video/Kconfig | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) --- linux-2.6.29-rc8.orig/drivers/video/Kconfig 2009-03-22 14:55:07.000000000 +0100 +++ linux-2.6.29-rc8/drivers/video/Kconfig 2009-03-23 11:16:19.000000000 +0100 @@ -1128,13 +1128,6 @@ config FB_INTEL 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. Say Y if you have and plan to use such a board. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - To compile this driver as a module, choose M here: the module will be called intelfb. @@ -1207,11 +1200,10 @@ config FB_MATROX_G pixel and 32 bpp packed pixel. You can also use font widths different from 8. - If you need support for G400 secondary head, you must first say Y to - "I2C support" in the character devices section, and then to - "Matrox I2C support" and "G400 second head support" here in the - framebuffer section. G450/G550 secondary head and digital output - are supported without additional modules. + If you need support for G400 secondary head, you must say Y to + "Matrox I2C support" and "G400 second head support" right below. + G450/G550 secondary head and digital output are supported without + additional modules. The driver starts in monitor mode. You must use the matroxset tool (available at ) to @@ -1310,13 +1302,6 @@ config FB_RADEON a framebuffer device. There are both PCI and AGP versions. You don't need to choose this to run the Radeon in plain VGA mode. - If you say Y here and want DDC/I2C support you must first say Y to - "I2C support" and "I2C bit-banging support" in the character devices - section. - - If you say M here then "I2C support" and "I2C bit-banging support" - can be build either as modules or built-in. - There is a product page at http://apps.ati.com/ATIcompare/ -- Jean Delvare