public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Joerg Roedel <joro@8bytes.org>
To: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Ingo Molnar <mingo@elte.hu>,
	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
	the arch/x86 maintainers <x86@kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Xen-devel <xen-devel@lists.xensource.com>,
	Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Subject: Re: [PATCH 1/9] xen: make sure swiotlb allocation is physically contigious
Date: Mon, 11 May 2009 15:55:33 +0200	[thread overview]
Message-ID: <20090511135532.GA8671@8bytes.org> (raw)
In-Reply-To: <1241741842-7966-2-git-send-email-jeremy@goop.org>

On Thu, May 07, 2009 at 05:17:14PM -0700, Jeremy Fitzhardinge wrote:
> Impact: make swiotlb allocation suitable for Xen
> 
> When allocating the swiotlb buffer under Xen, make sure the memory is
> physically contiguous so that its really suitable for DMA.
> 
> Do this by allocating the memory as usual, but then call a Xen
> function to rearrange the underlying pages to be physically
> contiguous.
> 
> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com>
> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
> ---
>  arch/x86/kernel/pci-swiotlb.c |   10 ----------
>  arch/x86/xen/Makefile         |    1 +
>  arch/x86/xen/pci-swiotlb.c    |   27 +++++++++++++++++++++++++++
>  drivers/pci/xen-iommu.c       |   16 ++++++++++++++++
>  include/xen/swiotlb.h         |    6 ++++++
>  5 files changed, 50 insertions(+), 10 deletions(-)
>  create mode 100644 arch/x86/xen/pci-swiotlb.c
>  create mode 100644 include/xen/swiotlb.h
> 
> diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c
> index 34f12e9..bc09da7 100644
> --- a/arch/x86/kernel/pci-swiotlb.c
> +++ b/arch/x86/kernel/pci-swiotlb.c
> @@ -13,16 +13,6 @@
>  
>  int swiotlb __read_mostly;
>  
> -void * __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
> -{
> -	return alloc_bootmem_low_pages(size);
> -}
> -
> -void *swiotlb_alloc(unsigned order, unsigned long nslabs)
> -{
> -	return (void *)__get_free_pages(GFP_DMA | __GFP_NOWARN, order);
> -}
> -
>  dma_addr_t swiotlb_phys_to_bus(struct device *hwdev, phys_addr_t paddr)
>  {
>  	return paddr;
> diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
> index c4cda96..caede49 100644
> --- a/arch/x86/xen/Makefile
> +++ b/arch/x86/xen/Makefile
> @@ -12,3 +12,4 @@ obj-y		:= enlighten.o setup.o multicalls.o mmu.o irq.o \
>  obj-$(CONFIG_SMP)		+= smp.o spinlock.o
>  obj-$(CONFIG_XEN_DEBUG_FS)	+= debugfs.o
>  obj-$(CONFIG_XEN_DOM0)		+= vga.o
> +obj-$(CONFIG_PCI_XEN)		+= pci-swiotlb.o
> \ No newline at end of file
> diff --git a/arch/x86/xen/pci-swiotlb.c b/arch/x86/xen/pci-swiotlb.c
> new file mode 100644
> index 0000000..25f0365
> --- /dev/null
> +++ b/arch/x86/xen/pci-swiotlb.c
> @@ -0,0 +1,27 @@
> +#include <linux/bootmem.h>
> +#include <linux/gfp.h>
> +
> +#include <xen/swiotlb.h>
> +#include <asm/xen/hypervisor.h>
> +
> +/* 
> + * This file defines overrides for weak functions with default
> + * implementations in lib/swiotlb.c.
> + */
> +
> +void * __init swiotlb_alloc_boot(size_t size, unsigned long nslabs)
> +{
> +	void *ret = alloc_bootmem_low_pages(size);
> +
> +	if (ret && xen_pv_domain())
> +		xen_swiotlb_fixup(ret, size, nslabs);
> +
> +	return ret;
> +}
> +
> +void *swiotlb_alloc(unsigned order, unsigned long nslabs)
> +{
> +	/* Never called on x86.  Warn, just in case. */

Can't this function be removed completly then?

> +	WARN_ON(1);
> +	return NULL;
> +}
> diff --git a/drivers/pci/xen-iommu.c b/drivers/pci/xen-iommu.c
> index 32a8b49..c593058 100644
> --- a/drivers/pci/xen-iommu.c
> +++ b/drivers/pci/xen-iommu.c
> @@ -12,6 +12,7 @@
>  #include <xen/grant_table.h>
>  #include <xen/page.h>
>  #include <xen/xen-ops.h>
> +#include <xen/swiotlb.h>
>  
>  #include <asm/iommu.h>
>  #include <asm/swiotlb.h>
> @@ -34,6 +35,21 @@ do {							\
>  	(unsigned long long)addr + size);		\
>  } while (0)
>  
> +
> +void xen_swiotlb_fixup(void *buf, size_t size, unsigned long nslabs)
> +{
> +	unsigned order = get_order(size);
> +
> +	printk(KERN_DEBUG "xen_swiotlb_fixup: buf=%p size=%zu order=%u\n",
> +		buf, size, order);
> +
> +	if (WARN_ON(size != (PAGE_SIZE << order)))
> +		return;
> +
> +	if (xen_create_contiguous_region((unsigned long)buf,
> +					 order, 0xffffffff))
                                                DMA_32BIT_MASK?

> +		printk(KERN_ERR "xen_create_contiguous_region failed\n");
> +}
>  static inline int address_needs_mapping(struct device *hwdev,
>  						dma_addr_t addr)
>  {
> diff --git a/include/xen/swiotlb.h b/include/xen/swiotlb.h
> new file mode 100644
> index 0000000..67b7b42
> --- /dev/null
> +++ b/include/xen/swiotlb.h
> @@ -0,0 +1,6 @@
> +#ifndef _XEN_SWIOTLB_H
> +#define _XEN_SWIOTLB_H
> +
> +extern void xen_swiotlb_fixup(void *buf, size_t size, unsigned long nslabs);
> +
> +#endif /* _XEN_SWIOTLB_H */
> -- 
> 1.6.0.6
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

  parent reply	other threads:[~2009-05-11 13:55 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-05-08  0:17 [GIT PULL] xen: swiotlb support for Xen dom0 Jeremy Fitzhardinge
2009-05-08  0:17 ` [PATCH 1/9] xen: make sure swiotlb allocation is physically contigious Jeremy Fitzhardinge
2009-05-08  7:47   ` [Xen-devel] [PATCH 1/9] xen: make sure swiotlb allocation isphysically contigious Jan Beulich
2009-05-08 15:51     ` Jeremy Fitzhardinge
2009-05-11  3:40   ` [PATCH 1/9] xen: make sure swiotlb allocation is physically contigious FUJITA Tomonori
2009-05-11 13:55   ` Joerg Roedel [this message]
2009-05-11 18:42     ` Jeremy Fitzhardinge
2009-05-08  0:17 ` [PATCH 2/9] xen swiotlb: fixup swiotlb is chunks smaller than MAX_CONTIG_ORDER Jeremy Fitzhardinge
2009-05-08  0:17 ` [PATCH 3/9] xen: add hooks for mapping phys<->bus addresses in swiotlb Jeremy Fitzhardinge
2009-05-11  3:40   ` FUJITA Tomonori
2009-05-11 14:11   ` Joerg Roedel
2009-05-08  0:17 ` [PATCH 4/9] xen/swiotlb: add swiotlb_arch_range_needs_mapping hook for xen Jeremy Fitzhardinge
2009-05-11  3:40   ` FUJITA Tomonori
2009-05-11 14:16   ` Joerg Roedel
2009-05-08  0:17 ` [PATCH 5/9] xen: enable swiotlb for xen domain 0 Jeremy Fitzhardinge
2009-05-11  3:40   ` FUJITA Tomonori
2009-05-11 14:21   ` Joerg Roedel
2009-05-08  0:17 ` [PATCH 6/9] swiotlb: use swiotlb_alloc_boot to allocate emergency pool Jeremy Fitzhardinge
2009-05-08  0:17 ` [PATCH 7/9] xen/swiotlb: improve comment on gfp flags in xen_alloc_coherent() Jeremy Fitzhardinge
2009-05-08  0:17 ` [PATCH 8/9] xen/swiotlb: add sync functions Jeremy Fitzhardinge
2009-05-08  0:17 ` [PATCH 9/9] xen/swiotlb: update to new new dma_ops Jeremy Fitzhardinge
2009-05-08 11:19 ` [GIT PULL] xen: swiotlb support for Xen dom0 Ingo Molnar
2009-05-11  3:40 ` FUJITA Tomonori
2009-05-11 16:59   ` Jeremy Fitzhardinge
2009-05-11 22:45     ` FUJITA Tomonori
2009-05-11 13:04 ` Ingo Molnar
2009-05-11 16:57   ` Jeremy Fitzhardinge
  -- strict thread matches above, loose matches on Subject: below --
2009-03-31 22:52 [PATCH] swiotlb updates " Jeremy Fitzhardinge
2009-03-31 22:52 ` [PATCH 1/9] xen: make sure swiotlb allocation is physically contigious Jeremy Fitzhardinge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090511135532.GA8671@8bytes.org \
    --to=joro@8bytes.org \
    --cc=fujita.tomonori@lab.ntt.co.jp \
    --cc=jeremy.fitzhardinge@citrix.com \
    --cc=jeremy@goop.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=x86@kernel.org \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox