[PATCH v2] [BUGFIX] x86/x86_64: fix CPU offlining triggered inactive device IRQ interrruption

[PATCH v2] [BUGFIX] x86/x86_64: fix CPU offlining triggered inactive device IRQ interrruption

[Gary Hade]

Impact: Eliminates a race that can leave the system in an
        unusable state

During rapid offlining of multiple CPUs there is a chance
that an IRQ affinity move destination CPU will be offlined
before the IRQ affinity move initiated during the offlining
of a previous CPU completes.  This can happen when the device
is not very active and thus fails to generate the IRQ that is
needed to complete the IRQ affinity move before the move
destination CPU is offlined.  When this happens there is an
-EBUSY return from __assign_irq_vector() during the offlining
of the IRQ move destination CPU which prevents initiation of
a new IRQ affinity move operation to an online CPU.  This
leaves the IRQ affinity set to an offlined CPU.

I have been able to reproduce the problem on some of our
systems using the following script.  When the system is idle
the problem often reproduces during the first CPU offlining
sequence.

#!/bin/sh

SYS_CPU_DIR=/sys/devices/system/cpu
VICTIM_IRQ=25
IRQ_MASK=f0

iteration=0
while true; do
  echo $iteration
  echo $IRQ_MASK > /proc/irq/$VICTIM_IRQ/smp_affinity
  for cpudir in $SYS_CPU_DIR/cpu[1-9] $SYS_CPU_DIR/cpu??; do
    echo 0 > $cpudir/online
  done
  for cpudir in $SYS_CPU_DIR/cpu[1-9] $SYS_CPU_DIR/cpu??; do
    echo 1 > $cpudir/online
  done
  iteration=`expr $iteration + 1`
done

The proposed fix takes advantage of the fact that when all
CPUs in the old domain are offline there is nothing to be done
by send_cleanup_vector() during the affinity move completion.
So, we simply avoid setting cfg->move_in_progress preventing
the above mentioned -EBUSY return from __assign_irq_vector().
This allows initiation of a new IRQ affinity move to a CPU
that is not going offline.

Successfully tested with Ingo's linux-2.6-tip (32 and 64-bit
builds) on the IBM x460, x3550 M2, x3850, and x3950 M2.

v2: modified to integrate with Yinghai Lu's
    "x86/irq: remove leftover code from NUMA_MIGRATE_IRQ_DESC"
    patch which modified intersecting lines.  Only comment 
    changes were affected.  The actual change to the code 
    is the same.  

Signed-off-by: Gary Hade <garyhade@us.ibm.com>

---
 arch/x86/kernel/apic/io_apic.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

Index: linux-2.6-tip/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6-tip.orig/arch/x86/kernel/apic/io_apic.c	2009-05-14 14:06:30.000000000 -0700
+++ linux-2.6-tip/arch/x86/kernel/apic/io_apic.c	2009-05-14 14:09:42.000000000 -0700
@@ -1218,8 +1218,11 @@ next:
 		current_vector = vector;
 		current_offset = offset;
 		if (old_vector) {
-			cfg->move_in_progress = 1;
 			cpumask_copy(cfg->old_domain, cfg->domain);
+			if (cpumask_intersects(cfg->old_domain,
+					       cpu_online_mask)) {
+				cfg->move_in_progress = 1;
+			}
 		}
 		for_each_cpu_and(new_cpu, tmp_mask, cpu_online_mask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq;