From: "K.Prasad" <prasad@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>,
Frederic Weisbecker <fweisbec@gmail.com>,
Steven Rostedt <rostedt@goodmis.org>,
Andrew Morton <akpm@linux-foundation.org>,
Benjamin Herrenschmidt <benh@au1.ibm.com>,
maneesh@linux.vnet.ibm.com, Roland McGrath <roland@redhat.com>,
Masami Hiramatsu <mhiramat@redhat.com>,
"K.Prasad" <prasad@linux.vnet.ibm.com>
Subject: [Patch 12/12] Reset bits in dr6 after the corresponding exception is handled
Date: Sat, 16 May 2009 06:01:50 +0530 [thread overview]
Message-ID: <20090516003150.GM16792@in.ibm.com> (raw)
In-Reply-To: 20090515105133.629980476@prasadkr_t60p.in.ibm.com
[-- Attachment #1: dr6_changes_12 --]
[-- Type: text/plain, Size: 4284 bytes --]
This patch resets the bit in dr6 after the corresponding exception is
handled in code.
Signed-off-by: K.Prasad <prasad@linux.vnet.ibm.com>
---
arch/x86/kernel/hw_breakpoint.c | 13 +++++++++++--
arch/x86/kernel/kgdb.c | 6 ++++++
arch/x86/kernel/kprobes.c | 9 ++++++++-
arch/x86/kernel/traps.c | 4 ++--
arch/x86/mm/kmmio.c | 8 +++++++-
5 files changed, 34 insertions(+), 6 deletions(-)
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/traps.c
===================================================================
--- linux-2.6-tip.hbkpt.orig/arch/x86/kernel/traps.c
+++ linux-2.6-tip.hbkpt/arch/x86/kernel/traps.c
@@ -550,8 +550,8 @@ dotraplinkage void __kprobes do_debug(st
/* Store the virtualized DR6 value */
tsk->thread.debugreg6 = dr6;
- if (notify_die(DIE_DEBUG, "debug", regs, dr6, error_code,
- SIGTRAP) == NOTIFY_STOP)
+ if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
+ SIGTRAP) == NOTIFY_STOP)
return;
/* It's safe to allow irq's after DR6 has been saved */
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/kgdb.c
===================================================================
--- linux-2.6-tip.hbkpt.orig/arch/x86/kernel/kgdb.c
+++ linux-2.6-tip.hbkpt/arch/x86/kernel/kgdb.c
@@ -43,6 +43,7 @@
#include <linux/smp.h>
#include <linux/nmi.h>
+#include <asm/debugreg.h>
#include <asm/apicdef.h>
#include <asm/system.h>
@@ -433,6 +434,11 @@ single_step_cont(struct pt_regs *regs, s
"resuming...\n");
kgdb_arch_handle_exception(args->trapnr, args->signr,
args->err, "c", "", regs);
+ /*
+ * Reset the BS bit in dr6 (pointed by args->err) to
+ * denote completion of processing
+ */
+ (*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
return NOTIFY_STOP;
}
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/kprobes.c
===================================================================
--- linux-2.6-tip.hbkpt.orig/arch/x86/kernel/kprobes.c
+++ linux-2.6-tip.hbkpt/arch/x86/kernel/kprobes.c
@@ -54,6 +54,7 @@
#include <asm/pgtable.h>
#include <asm/uaccess.h>
#include <asm/alternative.h>
+#include <asm/debugreg.h>
void jprobe_return_end(void);
@@ -967,8 +968,14 @@ int __kprobes kprobe_exceptions_notify(s
ret = NOTIFY_STOP;
break;
case DIE_DEBUG:
- if (post_kprobe_handler(args->regs))
+ if (post_kprobe_handler(args->regs)) {
+ /*
+ * Reset the BS bit in dr6 (pointed by args->err) to
+ * denote completion of processing
+ */
+ (*(unsigned long *)ERR_PTR(args->err)) &= ~DR_STEP;
ret = NOTIFY_STOP;
+ }
break;
case DIE_GPF:
/*
Index: linux-2.6-tip.hbkpt/arch/x86/mm/kmmio.c
===================================================================
--- linux-2.6-tip.hbkpt.orig/arch/x86/mm/kmmio.c
+++ linux-2.6-tip.hbkpt/arch/x86/mm/kmmio.c
@@ -540,8 +540,14 @@ kmmio_die_notifier(struct notifier_block
struct die_args *arg = args;
if (val == DIE_DEBUG && (arg->err & DR_STEP))
- if (post_kmmio_handler(arg->err, arg->regs) == 1)
+ if (post_kmmio_handler(arg->err, arg->regs) == 1) {
+ /*
+ * Reset the BS bit in dr6 (pointed by args->err) to
+ * denote completion of processing
+ */
+ (*(unsigned long *)ERR_PTR(arg->err)) &= ~DR_STEP;
return NOTIFY_STOP;
+ }
return NOTIFY_DONE;
}
Index: linux-2.6-tip.hbkpt/arch/x86/kernel/hw_breakpoint.c
===================================================================
--- linux-2.6-tip.hbkpt.orig/arch/x86/kernel/hw_breakpoint.c
+++ linux-2.6-tip.hbkpt/arch/x86/kernel/hw_breakpoint.c
@@ -301,8 +301,12 @@ int __kprobes hw_breakpoint_handler(stru
{
int i, cpu, rc = NOTIFY_STOP;
struct hw_breakpoint *bp;
- /* The DR6 value is stored in args->err */
- unsigned long dr7, dr6 = args->err;
+ unsigned long dr7, dr6;
+ unsigned long *dr6_p;
+
+ /* The DR6 value is pointed by args->err */
+ dr6_p = (unsigned long *)ERR_PTR(args->err);
+ dr6 = *dr6_p;
/* Do an early return if no trap bits are set in DR6 */
if ((dr6 & DR_TRAP_BITS) == 0)
@@ -346,6 +350,11 @@ int __kprobes hw_breakpoint_handler(stru
continue;
(bp->triggered)(bp, args->regs);
+ /*
+ * Reset the 'i'th TRAP bit in dr6 to denote completion of
+ * exception handling
+ */
+ (*dr6_p) &= ~(DR_TRAP0 << i);
}
if (dr6 & (~DR_TRAP_BITS))
rc = NOTIFY_DONE;
next prev parent reply other threads:[~2009-05-16 0:32 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090515105133.629980476@prasadkr_t60p.in.ibm.com>
2009-05-15 10:55 ` [Patch 01/12] Prepare the code for Hardware Breakpoint interfaces K.Prasad
2009-05-15 10:56 ` [Patch 02/12] Introducing generic hardware breakpoint handler interfaces K.Prasad
2009-05-15 10:56 ` [Patch 03/12] x86 architecture implementation of Hardware Breakpoint interfaces K.Prasad
2009-05-15 10:57 ` [Patch 04/12] Modifying generic debug exception to use thread-specific debug registers K.Prasad
2009-05-15 10:57 ` [Patch 05/12] Use wrapper routines around debug registers in processor related functions K.Prasad
2009-05-15 10:58 ` [Patch 06/12] Use the new wrapper routines to access debug registers in process/thread code K.Prasad
2009-05-15 10:58 ` [Patch 07/12] Modify signal handling code to refrain from re-enabling HW Breakpoints K.Prasad
2009-05-15 10:59 ` [Patch 08/12] Modify Ptrace routines to access breakpoint registers K.Prasad
2009-05-15 10:59 ` [Patch 09/12] Cleanup HW Breakpoint registers before kexec K.Prasad
2009-05-15 10:59 ` [Patch 10/12] Sample HW breakpoint over kernel data address K.Prasad
2009-05-15 11:00 ` [Patch 11/12] ftrace plugin for kernel symbol tracing using HW Breakpoint interfaces - v5 K.Prasad
2009-05-15 11:00 ` [Patch 12/12] Reset bits in dr6 after the corresponding exception is handled K.Prasad
2009-05-16 0:24 ` [Patch 01/12] Prepare the code for Hardware Breakpoint interfaces K.Prasad
2009-05-16 0:25 ` [Patch 02/12] Introducing generic hardware breakpoint handler interfaces K.Prasad
2009-05-25 18:36 ` Frederic Weisbecker
2009-05-26 3:22 ` K.Prasad
2009-05-26 10:19 ` Frederic Weisbecker
2009-05-16 0:27 ` [Patch 03/12] x86 architecture implementation of Hardware Breakpoint interfaces K.Prasad
2009-05-16 0:28 ` [Patch 04/12] Modifying generic debug exception to use thread-specific debug registers K.Prasad
2009-05-16 0:28 ` [Patch 05/12] Use wrapper routines around debug registers in processor related functions K.Prasad
2009-05-16 0:29 ` [Patch 06/12] Use the new wrapper routines to access debug registers in process/thread code K.Prasad
2009-05-16 0:29 ` [Patch 07/12] Modify signal handling code to refrain from re-enabling HW Breakpoints K.Prasad
2009-05-16 0:30 ` [Patch 08/12] Modify Ptrace routines to access breakpoint registers K.Prasad
2009-05-16 0:30 ` [Patch 09/12] Cleanup HW Breakpoint registers before kexec K.Prasad
2009-05-16 0:30 ` [Patch 10/12] Sample HW breakpoint over kernel data address K.Prasad
2009-05-16 0:31 ` [Patch 11/12] ftrace plugin for kernel symbol tracing using HW Breakpoint interfaces - v5 K.Prasad
2009-05-16 0:31 ` K.Prasad [this message]
[not found] <20090601180605.799735829@prasadkr_t60p.in.ibm.com>
2009-06-01 18:17 ` [Patch 12/12] Reset bits in dr6 after the corresponding exception is handled K.Prasad
[not found] <20090530103857.715014561@prasadkr_t60p.in.ibm.com>
2009-05-30 10:55 ` K.Prasad
[not found] <20090521095613.834622717@prasadkr_t60p.in.ibm.com>
2009-05-21 14:03 ` K.Prasad
[not found] <20090513160546.592373797@prasadkr_t60p.in.ibm.com>
2009-05-13 16:16 ` K.Prasad
[not found] <20090511114422.133566343@prasadkr_t60p.in.ibm.com>
2009-05-11 11:55 ` K.Prasad
[not found] <20090424055710.764502564@prasadkr_t60p.in.ibm.com>
2009-04-24 6:19 ` K.Prasad
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090516003150.GM16792@in.ibm.com \
--to=prasad@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=benh@au1.ibm.com \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=maneesh@linux.vnet.ibm.com \
--cc=mhiramat@redhat.com \
--cc=mingo@elte.hu \
--cc=roland@redhat.com \
--cc=rostedt@goodmis.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox