From: Alex Chiang <achiang@hp.com>
To: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: [PATCH v2 00/11] Dynamic ACPI-PCI binding
Date: Wed, 03 Jun 2009 23:58:16 -0600 [thread overview]
Message-ID: <20090604054504.18802.21690.stgit@bob.kio> (raw)
Hi Len,
I hope this isn't too late for the .31 merge window. If so, no big deal;
this patchset isn't urgent, it's just a nice cleanup that was inspired
from investigating the recent bug in acpi_pci_bind() (fixed by dacd254).
This patch series eliminates static boot-time binding of ACPI
and PCI devices, and introduces an API to perform this lookup
during runtime.
This change has the following advantages:
- eliminates struct acpi_device vs struct pci_dev lifetime issues
- lays groundwork for eliminating .bind/.unbind from acpi_device_ops
- lays more groundwork for eliminating .start from acpi_device_ops
and thus simplifying ACPI drivers
- whacks out a lot of code
This patchset is based on lenb/test (66c74fa1d4), and has been boot
tested on ia64 and x86. I also performed physical PCI hotplug tests
using acpiphp on ia64. I do not have an acpiphp-capable x86 platform.
I didn't test the changes in the video driver either, as I don't have
the hardware.
v1 -> v2
- rearrange series into a more logical order
- much simpler acpi_is_root_bridge() implementation
- no longer export acpi_pci_find_root()
- no longer leak memory in acpi_get_pci_dev()
- no longer leak references in acpi_pci_unbind/acpi_pci_bind
- convert video driver to use acpi_get_pci_dev()
- kill off acpi_get_physical_pci_device()
- incorporate Bjorn's other comments. :)
---
Alex Chiang (11):
ACPI: kill acpi_get_physical_pci_device()
ACPI: video: convert to acpi_get_pci_dev
ACPI: kill acpi_get_pci_id
PCI Hotplug: acpiphp: convert to acpi_get_pci_dev
ACPI: acpi_pci_unbind should clean up properly after acpi_pci_bind
ACPI: simplify acpi_pci_irq_del_prt() API
ACPI: simplify acpi_pci_irq_add_prt() API
ACPI: eviscerate pci_bind.c
ACPI: Introduce acpi_get_pci_dev()
ACPI: Introduce acpi_is_root_bridge()
ACPI: make acpi_pci_bind() static
drivers/acpi/glue.c | 40 -----
drivers/acpi/pci_bind.c | 315 +++++-------------------------------
drivers/acpi/pci_irq.c | 17 +-
drivers/acpi/pci_root.c | 112 ++++++++++++-
drivers/acpi/video.c | 6 -
drivers/acpi/video_detect.c | 9 +
drivers/pci/hotplug/acpi_pcihp.c | 40 -----
drivers/pci/hotplug/acpiphp_glue.c | 27 +--
include/acpi/acpi_bus.h | 2
include/acpi/acpi_drivers.h | 10 -
include/linux/pci_hotplug.h | 1
11 files changed, 179 insertions(+), 400 deletions(-)
next reply other threads:[~2009-06-04 5:58 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-04 5:58 Alex Chiang [this message]
2009-06-04 5:58 ` [PATCH v2 01/11] ACPI: make acpi_pci_bind() static Alex Chiang
2009-06-04 5:58 ` [PATCH v2 02/11] ACPI: Introduce acpi_is_root_bridge() Alex Chiang
2009-06-04 5:58 ` [PATCH v2 03/11] ACPI: Introduce acpi_get_pci_dev() Alex Chiang
2009-06-04 5:58 ` [PATCH v2 04/11] ACPI: eviscerate pci_bind.c Alex Chiang
2009-06-04 5:58 ` [PATCH v2 05/11] ACPI: simplify acpi_pci_irq_add_prt() API Alex Chiang
2009-06-04 5:58 ` [PATCH v2 06/11] ACPI: simplify acpi_pci_irq_del_prt() API Alex Chiang
2009-06-04 5:58 ` [PATCH v2 07/11] ACPI: acpi_pci_unbind should clean up properly after acpi_pci_bind Alex Chiang
2009-06-04 8:42 ` Kenji Kaneshige
2009-06-04 23:35 ` Alex Chiang
2009-06-05 15:49 ` Bjorn Helgaas
2009-06-05 15:59 ` Alex Chiang
2009-06-09 19:14 ` Alex Chiang
2009-06-08 3:23 ` Kenji Kaneshige
2009-06-09 19:09 ` Alex Chiang
2009-06-04 5:58 ` [PATCH v2 08/11] PCI Hotplug: acpiphp: convert to acpi_get_pci_dev Alex Chiang
2009-06-11 21:48 ` Jesse Barnes
2009-06-11 22:17 ` Jesse Barnes
2009-06-04 5:59 ` [PATCH v2 09/11] ACPI: kill acpi_get_pci_id Alex Chiang
2009-06-04 5:59 ` [PATCH v2 10/11] ACPI: video: convert to acpi_get_pci_dev Alex Chiang
2009-06-04 5:59 ` [PATCH v2 11/11] ACPI: kill acpi_get_physical_pci_device() Alex Chiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090604054504.18802.21690.stgit@bob.kio \
--to=achiang@hp.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox