From: "Michael S. Zick" <lkml@morethan.org>
To: tomaz.mertelj@guest.arnes.si
Cc: Harald Welte <HaraldWelte@viatech.com>,
Jean Delvare <khali@linux-fr.org>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature
Date: Fri, 12 Jun 2009 10:12:34 -0500 [thread overview]
Message-ID: <200906121012.36832.lkml@morethan.org> (raw)
In-Reply-To: <200906120957.27223.lkml@morethan.org>
On Fri June 12 2009, Michael S. Zick wrote:
> On Fri June 12 2009, tomaz.mertelj@guest.arnes.si wrote:
> > > >
> > > > Ah, 25 degrees C is room temperature - real hard for the junction
> > temperature
> > > > to be 25 degrees C with power applied; lacking an infinitely perfect
> > heatsink.
> > > >
> > > > Look for an "off by one" error in shifting or masking the value.
> > >
> > > there is no shifting and the masking is 0xffffffff :)
> > >
> > > it might be that the BIOS is doing something wrong when programming the
> > > calibration MSR's at early botoup. I would need the contents of MSR
> > > 0x1160 ... 0x116C as well as 0x1152 and 0x1153 to be able to determine
> > that.
> > >
> >
> > This is what I get on VB7002.. vith C7-D cpu:
> >
> >
> > DEBNAS:/home# sensors
> >
> > via-cputemp-isa-0000
> > Adapter: ISA adapter
> > Core 0: +27.0 C
> >
> > DEBNAS:/home# for r in 0x1160 0x1161 0x1162 0x1163 0x1164 0x1165 0x1166
> > 0x1167
> > 0x1168 0x1169 0x116a 0x116b 0x116c 0x1152 0x1153 ; do ./rdmsr $r ; done
> > MSR register 0x1160 => 08:04:98:10:b8:0b:6f:f4
> > MSR register 0x1161 => 08:04:98:10:b8:0a:8f:f4
> > MSR register 0x1162 => 08:04:98:10:b7:f7:7f:f4
> > MSR register 0x1163 => 08:04:98:10:b7:f1:1f:f4
> > MSR register 0x1164 => 08:04:98:10:b7:ee:cf:f4
> > MSR register 0x1165 => 08:04:98:10:b8:0b:4f:f4
> > MSR register 0x1166 => 08:04:98:10:b7:f7:7f:f4
> > MSR register 0x1167 => 08:04:98:10:b7:ef:8f:f4
> > MSR register 0x1168 => 08:04:98:10:b7:fc:3f:f4
> > MSR register 0x1169 => 08:04:98:10:b8:0d:6f:f4
> > MSR register 0x116a => 08:04:98:10:b7:f3:8f:f4
> > MSR register 0x116b => 08:04:98:10:b8:0b:bf:f4
> > MSR register 0x116c => 08:04:98:10:b8:00:6f:f4
> > MSR register 0x1152 => 08:04:98:10:b7:f2:2f:f4
> > MSR register 0x1153 => 08:04:98:10:b8:0b:3f:f4
> > DEBNAS:/home#
> >
> >
>
> The author had a problem in that routine -
> try this one (32bit machines only) -
>
That tool has more than one problem -
Try installing your distro's msr-tools package instead.
Mike
> Mike
> > Tomaz Mertelj
> >
> >
> >
>
>
>
next prev parent reply other threads:[~2009-06-12 15:12 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-12 14:46 [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature= tomaz.mertelj
2009-06-12 14:57 ` [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature Michael S. Zick
2009-06-12 15:12 ` Michael S. Zick [this message]
-- strict thread matches above, loose matches on Subject: below --
2009-06-12 18:16 [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature= tomaz.mertelj
2009-06-12 18:20 ` [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature Michael S. Zick
2009-06-12 15:25 [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature= tomaz.mertelj
2009-06-12 15:31 ` [lm-sensors] [PATCH] hwmon: Add driver for VIA CPU core temperature Michael S. Zick
2009-06-12 16:04 ` Michael S. Zick
2009-06-12 17:38 ` Michael S. Zick
2009-06-09 8:34 Harald Welte
2009-06-10 17:40 ` Tomaz Mertelj
2009-06-11 22:32 ` Andrew Morton
2009-06-12 8:12 ` [lm-sensors] " Jean Delvare
2009-06-12 9:11 ` Tomaz Mertelj
2009-06-12 9:27 ` Harald Welte
2009-06-12 11:46 ` Michael S. Zick
2009-06-12 12:54 ` Harald Welte
2009-06-12 13:09 ` Michael S. Zick
2009-06-12 13:41 ` Michael S. Zick
2009-06-12 13:47 ` Michael S. Zick
2009-06-12 14:23 ` Michael S. Zick
2009-06-19 21:11 ` Jean Delvare
2009-06-27 18:34 ` Juerg Haefliger
2009-08-13 18:42 ` Juerg Haefliger
2009-08-19 14:32 ` Harald Welte
2009-08-19 16:52 ` Juerg Haefliger
2009-12-09 7:17 ` Harald Welte
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200906121012.36832.lkml@morethan.org \
--to=lkml@morethan.org \
--cc=HaraldWelte@viatech.com \
--cc=akpm@linux-foundation.org \
--cc=khali@linux-fr.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=tomaz.mertelj@guest.arnes.si \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox