Re: [PATCH 1/3 v3] at91/USB: Add USB gadget driver selection for at91sam9g45 series

[David Brownell <david-b@pacbell.net>]

On Tuesday 23 June 2009, Nicolas Ferre wrote:
> Add gadget USB drivers for at91sam9g45 series. Those SOC include
> high speed USB interfaces.
> The gadget driver is the already available atmel_usba_udc.
> 
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Acked-by: David Brownell <dbrownell@users.sourceforge.net>

SAM9G45 patches aren't in mainine yet, right?  So I
assume these can wait (maybe until 2.6.32-early).


> ---
> v2 -> v3: split patch to:
> - gadget
> - ohci
> - ehci
> 
>  drivers/usb/gadget/Kconfig |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
> index 080bb1e..9beea52 100644
> --- a/drivers/usb/gadget/Kconfig
> +++ b/drivers/usb/gadget/Kconfig
> @@ -124,7 +124,7 @@ choice
>  
>  config USB_GADGET_AT91
>  	boolean "Atmel AT91 USB Device Port"
> -	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9
> +	depends on ARCH_AT91 && !ARCH_AT91SAM9RL && !ARCH_AT91CAP9 && !ARCH_AT91SAM9G45
>  	select USB_GADGET_SELECTED
>  	help
>  	   Many Atmel AT91 processors (such as the AT91RM2000) have a
> @@ -143,7 +143,7 @@ config USB_AT91
>  config USB_GADGET_ATMEL_USBA
>  	boolean "Atmel USBA"
>  	select USB_GADGET_DUALSPEED
> -	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL
> +	depends on AVR32 || ARCH_AT91CAP9 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
>  	help
>  	  USBA is the integrated high-speed USB Device controller on
>  	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
> -- 
> 1.5.3.7
> 
>