* ACPI issues on HP DL585 G2
@ 2009-06-28 3:40 Stephen Frost
2009-06-28 4:26 ` Yinghai Lu
2009-06-28 17:20 ` Alex Chiang
0 siblings, 2 replies; 26+ messages in thread
From: Stephen Frost @ 2009-06-28 3:40 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 771 bytes --]
Greetings,
When running pretty much anything newer than 2.6.22, both the cciss
module and the bnx2 module get stuck in a "Loading" state in
/proc/modules. As cciss contains my root partition, I get dropped
into an initrd after a while because root can't be found. After some
googleing, etc, I saw a bunch of recommendations to add
"pci=noapic noapic" to the command-line. After I did that, the box
booted fine under 2.6.29. I figured people might like to hear about
this issue though. Attached are a dmesg from 2.6.22 and a dmesg from
2.6.29 (w/ the noapic options). I've also included the output of
hpasmcli -s "show server". If there's anything else that would be
useful to help figure this out, please let me know.
Thanks,
Stephen
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: dmesg-acpi --]
[-- Type: text/plain; charset=utf-8, Size: 27857 bytes --]
Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007
Command line: root=/dev/cciss/c0d0p1 ro
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523856) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 4718591) 2 entries of 3200 used
end_pfn_map = 4718591
DMI 2.3 present.
ACPI: RSDP 000F4F00, 0024 (r2 HP )
ACPI: XSDT 7FE50780, 005C (r1 HP A07 2 Ò\x04 162E)
ACPI: FACP 7FE50800, 00F4 (r3 HP A07 2 Ò\x04 162E)
ACPI: DSDT 7FE50900, 42FF (r1 HP DSDT 1 INTL 20030228)
ACPI: FACS 7FE500C0, 0040
ACPI: SPCR 7FE50100, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E)
ACPI: MCFG 7FE50180, 003C (r1 HP ProLiant 1 0)
ACPI: HPET 7FE501C0, 0038 (r1 HP A07 2 Ò\x04 162E)
ACPI: SPMI 7FE50200, 0040 (r5 HP ProLiant 1 Ò\x04 162E)
ACPI: APIC 7FE50240, 0106 (r1 HP 00000083 2 0)
ACPI: SRAT 7FE50380, 01A0 (r1 AMD HAMMER 1 AMD 1)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-80000000
Entering add_active_range(0, 0, 159) 1 entries of 3200 used
Entering add_active_range(0, 256, 523856) 1 entries of 3200 used
SRAT: Node 0 PXM 0 0-180000000
Entering add_active_range(0, 0, 159) 2 entries of 3200 used
Entering add_active_range(0, 256, 523856) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used
SRAT: Node 1 PXM 1 180000000-280000000
Entering add_active_range(1, 1572864, 2621440) 3 entries of 3200 used
SRAT: Node 2 PXM 2 280000000-380000000
Entering add_active_range(2, 2621440, 3670016) 4 entries of 3200 used
SRAT: Node 3 PXM 3 380000000-480000000
Entering add_active_range(3, 3670016, 4718591) 5 entries of 3200 used
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
Bootmem setup node 1 0000000180000000-0000000280000000
Bootmem setup node 2 0000000280000000-0000000380000000
Bootmem setup node 3 0000000380000000-000000047ffff000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 4718591
early_node_map[6] active PFN ranges
0: 0 -> 159
0: 256 -> 523856
0: 1048576 -> 1572864
1: 1572864 -> 2621440
2: 2621440 -> 3670016
3: 3670016 -> 4718591
On node 0 totalpages: 1048047
DMA zone: 56 pages used for memmap
DMA zone: 1034 pages reserved
DMA zone: 2909 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505480 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
On node 2 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
On node 3 totalpages: 1048575
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14335 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Processor #4
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Processor #5
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xf7cf0000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xf7cf0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xf7fd0000] gsi_base[24])
IOAPIC[1]: apic_id 9, address 0xf7fd0000, GSI 24-30
ACPI: IOAPIC (id[0x0a] address[0xf7fe0000] gsi_base[31])
IOAPIC[2]: apic_id 10, address 0xf7fe0000, GSI 31-37
ACPI: IOAPIC (id[0x0b] address[0xf7ff0000] gsi_base[38])
IOAPIC[3]: apic_id 11, address 0xf7ff0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: NMI_SRC (dfl dfl global_irq 28)
ACPI: NMI_SRC (dfl dfl global_irq 35)
Setting APIC routing to flat
ACPI: HPET id: 0x10228201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000007fe50000 - 000000007fe58000
swsusp: Registered nosave memory region: 000000007fe58000 - 0000000080000000
swsusp: Registered nosave memory region: 0000000080000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000
swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000
swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000
swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37896 bytes of per cpu data
Built 4 zonelists. Total pages: 4128229
Kernel command line: root=/dev/cciss/c0d0p1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2812.961 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ bde2000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 16438940k/18874364k available (2008k kernel code, 336156k reserved, 945k data, 296k init)
Calibrating delay using timer specific routine.. 5628.99 BogoMIPS (lpj=11257985)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12557870
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/8 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 5625.95 BogoMIPS (lpj=11251900)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/8 APIC 0x4
Initializing CPU#2
Calibrating delay using timer specific routine.. 5625.94 BogoMIPS (lpj=11251888)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/8 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 5626.04 BogoMIPS (lpj=11252096)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 4/8 APIC 0x1
Initializing CPU#4
Calibrating delay using timer specific routine.. 5626.08 BogoMIPS (lpj=11252170)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 5/8 APIC 0x3
Initializing CPU#5
Calibrating delay using timer specific routine.. 5626.16 BogoMIPS (lpj=11252324)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 6/8 APIC 0x5
Initializing CPU#6
Calibrating delay using timer specific routine.. 5626.18 BogoMIPS (lpj=11252370)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 5625.97 BogoMIPS (lpj=11251943)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Brought up 8 CPUs
migration_cost=458,599
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at 80000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
PCI: Probing PCI hardware (bus 40)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid IPI0001
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0A06
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0003
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x700-0x73f has been reserved
pnp: 00:01: iomem range 0x80000000-0x8fffffff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: 2000-3fff
MEM window: f7d00000-f7efffff
PREFETCH window: e8000000-efffffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:40:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:10.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: 90000000-900fffff
PCI: Bridge: 0000:40:11.0
IO window: 4000-4fff
MEM window: fdf00000-fdffffff
PREFETCH window: 90100000-901fffff
PCI: Setting latency timer of device 0000:40:0b.0 to 64
PCI: Setting latency timer of device 0000:40:0c.0 to 64
PCI: Setting latency timer of device 0000:40:0d.0 to 64
PCI: Setting latency timer of device 0000:40:0e.0 to 64
NET: Registered protocol family 2
Time: hpet clocksource has been installed.
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 2097152 (order: 13, 50331648 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 2097152 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 7574k freed
audit: initializing netlink socket (disabled)
audit(1246055003.828:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found enabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:0e.0
Boot video device is 0000:01:03.0
pci 0000:01:04.4: HCRESET not completed yet!
PCI: Found enabled HT MSI Mapping on 0000:40:0b.0
PCI: Found enabled HT MSI Mapping on 0000:40:0c.0
PCI: Found enabled HT MSI Mapping on 0000:40:0d.0
PCI: Found enabled HT MSI Mapping on 0000:40:0e.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:40:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0b.0:pcie00]
PCI: Setting latency timer of device 0000:40:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0c.0:pcie00]
PCI: Setting latency timer of device 0000:40:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0d.0:pcie00]
PCI: Setting latency timer of device 0000:40:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0e.0:pcie00]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:09' and the driver 'serial'
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 296k freed
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7cd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
SCSI subsystem initialized
HP CISS Driver (v 3.6.14)
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 163
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a3) UDMA133 controller
ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007)
ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 31
eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fa000000, IRQ 31, node addr 001cc4f094fa
ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 32
eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f8000000, IRQ 32, node addr 001cc4f094fc
ACPI: PCI Interrupt 0000:42:02.0[A] -> GSI 26 (level, low) -> IRQ 26
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00003800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
blocks= 860051248 block_size= 512
heads=255, sectors=32, cylinders=105399
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
cciss/c0d0: p1 p2
blocks= 860051248 block_size= 512
heads=255, sectors=32, cylinders=105399
cciss/c0d1: unknown partition table
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7ce0000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 10 ports detected
libata version 2.21 loaded.
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
usb 2-1: new full speed USB device using uhci_hcd and address 2
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
usb 2-1: configuration #1 chosen from 1 choice
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-2: new full speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
hub 2-2:1.0: USB hub found
hub 2-2:1.0: 7 ports detected
usb 3-3: new low speed USB device using ohci_hcd and address 2
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usb 3-3: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HP Virtual Keyboard as /class/input/input0
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input1
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: Avocent HP 336047-B21 as /class/input/input2
input: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3
input: Avocent HP 336047-B21 as /class/input/input3
input: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
EXT3 FS on cciss/c0d0p1, internal journal
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ipmi message handler version 39.1
ipmi device interface
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7df0000, slave address 0x0, irq 16
Using irq 16
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k
NET: Registered protocol family 15
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: MII link monitoring set to 100 ms
bonding: bond0: Adding slave eth0.
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bonding: bond0: Adding slave eth1.
bonding: bond0: enslaving eth1 as a backup interface with a down link.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): bond0: link is not ready
Initializing XFRM netlink socket
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: dmesg-no-acpi --]
[-- Type: text/plain; charset=utf-8, Size: 57992 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.29-2-amd64 (Debian 2.6.29-4) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-8) ) #1 SMP Sun May 3 11:38:27 UTC 2009
[ 0.000000] Command line: root=/dev/cciss/c0d0p1 ro pci=noapic noapic
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)
[ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)
[ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
[ 0.000000] PCI: Unknown option `noapic'
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000
[ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fe57000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000
[ 0.000000] last_map_addr: 7fe57000 end: 7fe57000
[ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000
[ 0.000000] 0100000000 - 047fe00000 page 2M
[ 0.000000] 047fe00000 - 047ffff000 page 4k
[ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000
[ 0.000000] last_map_addr: 47ffff000 end: 47ffff000
[ 0.000000] RAMDISK: 37783000 - 37fef87c
[ 0.000000] ACPI: RSDP 000F4F00, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT 7FE4ED00, 0074 (r1 HP ProLiant 2 Ò\x04 162E)
[ 0.000000] ACPI: FACP 7FE4ED80, 00F4 (r3 HP A07 2 Ò\x04 162E)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 7FE4EE80, 498A (r1 HP DSDT 1 INTL 20030228)
[ 0.000000] ACPI: FACS 7FE4E100, 0040
[ 0.000000] ACPI: SPCR 7FE4E140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E)
[ 0.000000] ACPI: HPET 7FE4E1C0, 0038 (r1 HP ProLiant 2 Ò\x04 162E)
[ 0.000000] ACPI: SPMI 7FE4E200, 0040 (r5 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: ERST 7FE4E240, 01D0 (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: APIC 7FE4E440, 00C6 (r1 HP ProLiant 2 0)
[ 0.000000] ACPI: SRAT 7FE4E580, 01A0 (r1 AMD FAM_F_10 2 AMD 1)
[ 0.000000] ACPI: FFFF 7FE4E980, 0176 (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: BERT 7FE4EB00, 0030 (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: HEST 7FE4EB40, 0170 (r1 HP ProLiant 1 Ò\x04 162E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000
[ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000
[ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000
[ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000
[ 0.000000] NUMA: Allocated memnodemap from 19000 - 22080
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000
[ 0.000000] NODE_DATA [0000000000022080 - 000000000002a07f]
[ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0180000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS ==> [0000200000 - 00007ed74c]
[ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK ==> [0037783000 - 0037fef87c]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #6 [000000a000 - 0000019000] PGTABLE ==> [000000a000 - 0000019000]
[ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP ==> [0000019000 - 0000022080]
[ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000
[ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff]
[ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20
[ 0.000000] (8 early reservations) ==> bootmem [0180000000 - 0280000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS
[ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #6 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP
[ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000
[ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff]
[ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20
[ 0.000000] (8 early reservations) ==> bootmem [0280000000 - 0380000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS
[ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #6 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP
[ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000
[ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff]
[ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20
[ 0.000000] (8 early reservations) ==> bootmem [0380000000 - 047ffff000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS
[ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #6 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000f4f80] 000f4f80
[ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
[ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
[ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff880280200000-ffff8802839fffff] on node 2
[ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff880380200000-ffff8803839fffff] on node 3
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0047ffff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe4e
[ 0.000000] 0: 0x0007fe56 -> 0x0007fe57
[ 0.000000] 0: 0x00100000 -> 0x00180000
[ 0.000000] 1: 0x00180000 -> 0x00280000
[ 0.000000] 2: 0x00280000 -> 0x00380000
[ 0.000000] 3: 0x00380000 -> 0x0047ffff
[ 0.000000] On node 0 totalpages: 1048046
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1644 pages reserved
[ 0.000000] DMA zone: 2299 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 517120 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034239 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: HP
[ 0.000000] MPTABLE: Product ID: PROLIANT
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #8 Version 32 at 0xD9CF0000.
[ 0.000000] I/O APIC #9 Version 32 at 0xD9FD0000.
[ 0.000000] I/O APIC #10 Version 32 at 0xD9FE0000.
[ 0.000000] Processors: 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 38
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe56000
[ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Allocating 53248 bytes of per cpu data
[ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 4127617
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/cciss/c0d0p1 ro pci=noapic noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2813.240 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 16464280k/18874364k available (2546k kernel code, 2099272k absent, 310812k reserved, 1320k data, 552k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.48 BogoMIPS (lpj=11252960)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014230] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.020141] Mount-cache hash table entries: 256
[ 0.020510] Initializing cgroup subsys ns
[ 0.020573] Initializing cgroup subsys cpuacct
[ 0.020639] Initializing cgroup subsys devices
[ 0.020702] Initializing cgroup subsys freezer
[ 0.020766] Initializing cgroup subsys net_cls
[ 0.020873] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.020945] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.021009] CPU 0/0x0 -> Node 0
[ 0.021068] tseg: 0000000000
[ 0.021081] CPU: Physical Processor ID: 0
[ 0.021142] CPU: Processor Core ID: 0
[ 0.021208] using C1E aware idle routine
[ 0.022533] ACPI: Core revision 20081204
[ 0.030729] ACPI: setting ELCR to 0200 (from 8c20)
[ 0.031017] Setting APIC routing to flat
[ 0.031082] CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.032001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5625.85 BogoMIPS (lpj=11251710)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 1/0x2 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 0
[ 0.120174] CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.120985] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5625.89 BogoMIPS (lpj=11251797)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 2/0x4 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 0
[ 0.208210] CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.209028] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5625.92 BogoMIPS (lpj=11251857)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 3/0x6 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 0
[ 0.300192] CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.300903] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#4
[ 0.004000] Calibrating delay using timer specific routine.. 5625.88 BogoMIPS (lpj=11251766)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 4/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.388198] CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.388778] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#5
[ 0.004000] Calibrating delay using timer specific routine.. 5625.90 BogoMIPS (lpj=11251806)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 5/0x3 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 1
[ 0.476249] CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.477037] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.004000] Initializing CPU#6
[ 0.004000] Calibrating delay using timer specific routine.. 5625.88 BogoMIPS (lpj=11251772)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 6/0x5 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 1
[ 0.568202] CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.569002] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.004000] Initializing CPU#7
[ 0.004000] Calibrating delay using timer specific routine.. 5625.87 BogoMIPS (lpj=11251745)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 7/0x7 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 1
[ 0.656199] CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.656784] Brought up 8 CPUs
[ 0.656845] Total of 8 processors activated (45007.70 BogoMIPS).
[ 0.657027] CPU0 attaching sched-domain:
[ 0.657029] domain 0: span 0,4 level CPU
[ 0.657031] groups: 0 4
[ 0.657034] domain 1: span 0-7 level NODE
[ 0.657036] groups: 0,4 1,5 2,6 3,7
[ 0.657042] CPU1 attaching sched-domain:
[ 0.657043] domain 0: span 1,5 level CPU
[ 0.657044] groups: 1 5
[ 0.657047] domain 1: span 0-7 level NODE
[ 0.657048] groups: 1,5 2,6 3,7 0,4
[ 0.657054] CPU2 attaching sched-domain:
[ 0.657055] domain 0: span 2,6 level CPU
[ 0.657056] groups: 2 6
[ 0.657059] domain 1: span 0-7 level NODE
[ 0.657060] groups: 2,6 3,7 0,4 1,5
[ 0.657065] CPU3 attaching sched-domain:
[ 0.657067] domain 0: span 3,7 level CPU
[ 0.657068] groups: 3 7
[ 0.657071] domain 1: span 0-7 level NODE
[ 0.657072] groups: 3,7 0,4 1,5 2,6
[ 0.657077] CPU4 attaching sched-domain:
[ 0.657078] domain 0: span 0,4 level CPU
[ 0.657080] groups: 4 0
[ 0.657082] domain 1: span 0-7 level NODE
[ 0.657084] groups: 0,4 1,5 2,6 3,7
[ 0.657089] CPU5 attaching sched-domain:
[ 0.657090] domain 0: span 1,5 level CPU
[ 0.657092] groups: 5 1
[ 0.657094] domain 1: span 0-7 level NODE
[ 0.657095] groups: 1,5 2,6 3,7 0,4
[ 0.657100] CPU6 attaching sched-domain:
[ 0.657102] domain 0: span 2,6 level CPU
[ 0.657103] groups: 6 2
[ 0.657106] domain 1: span 0-7 level NODE
[ 0.657107] groups: 2,6 3,7 0,4 1,5
[ 0.657112] CPU7 attaching sched-domain:
[ 0.657114] domain 0: span 3,7 level CPU
[ 0.657115] groups: 7 3
[ 0.657118] domain 1: span 0-7 level NODE
[ 0.657119] groups: 3,7 0,4 1,5 2,6
[ 0.657335] net_namespace: 1888 bytes
[ 0.657335] Booting paravirtualized kernel on bare hardware
[ 0.657335] regulator: core version 0.5
[ 0.657335] NET: Registered protocol family 16
[ 0.657335] node 0 link 1: io port [1000, 2fff]
[ 0.657335] node 1 link 2: io port [3000, ffff]
[ 0.657335] TOM: 0000000080000000 aka 2048M
[ 0.657335] node 0 link 1: mmio [d0000000, d9efffff]
[ 0.657335] node 1 link 2: mmio [d9f00000, dfefffff]
[ 0.657335] node 0 link 1: mmio [e0000000, e3ffffff]
[ 0.657335] node 1 link 2: mmio [e4000000, e7ffffff]
[ 0.657335] node 0 link 1: mmio [a0000, bffff]
[ 0.657335] TOM2: 0000000480000000 aka 18432M
[ 0.657335] bus: [00,3f] on node 0 link 1
[ 0.657335] bus: 00 index 0 io port: [0, 2fff]
[ 0.657335] bus: 00 index 1 mmio: [80000000, d9efffff]
[ 0.657335] bus: 00 index 2 mmio: [dff00000, e3ffffff]
[ 0.657335] bus: 00 index 3 mmio: [a0000, bffff]
[ 0.657335] bus: 00 index 4 mmio: [e8000000, ffffffff]
[ 0.657335] bus: 00 index 5 mmio: [480000000, fcffffffff]
[ 0.657335] bus: [40,7f] on node 1 link 2
[ 0.657335] bus: 40 index 0 io port: [3000, ffff]
[ 0.657335] bus: 40 index 1 mmio: [d9f00000, dfefffff]
[ 0.657335] bus: 40 index 2 mmio: [e4000000, e7ffffff]
[ 0.657335] ACPI: bus type pci registered
[ 0.657335] PCI: Using configuration type 1 for base access
[ 0.657335] PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort.
[ 0.660277] bio: create slab <bio-0> at 0
[ 0.660435] ACPI: EC: Look up EC in DSDT
[ 0.668759] ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1)
[ 0.669531] ACPI: Interpreter enabled
[ 0.669592] ACPI: (supports S0 S4 S5)
[ 0.669741] ACPI: Using PIC for interrupt routing
[ 0.676178] ACPI: No dock devices found.
[ 0.676256] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.676358] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff]
[ 0.676358] pci 0000:00:02.0: supports D1 D2
[ 0.676358] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.676358] pci 0000:00:02.0: PME# disabled
[ 0.676358] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff]
[ 0.676358] pci 0000:00:02.1: supports D1 D2
[ 0.676358] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.676358] pci 0000:00:02.1: PME# disabled
[ 0.676422] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f]
[ 0.676464] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.676535] pci 0000:00:0c.0: PME# disabled
[ 0.676621] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.676691] pci 0000:00:0d.0: PME# disabled
[ 0.676772] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.676842] pci 0000:00:0e.0: PME# disabled
[ 0.677135] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.677140] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
[ 0.677145] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff]
[ 0.677160] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.677179] pci 0000:01:03.0: supports D1 D2
[ 0.677195] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
[ 0.677200] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff]
[ 0.677232] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 0.677302] pci 0000:01:04.0: PME# disabled
[ 0.677382] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
[ 0.677387] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff]
[ 0.677392] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff]
[ 0.677397] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff]
[ 0.677409] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.677431] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[ 0.677501] pci 0000:01:04.2: PME# disabled
[ 0.677594] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
[ 0.677622] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
[ 0.677692] pci 0000:01:04.4: PME# disabled
[ 0.680022] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff]
[ 0.680058] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
[ 0.680128] pci 0000:01:04.6: PME# disabled
[ 0.680216] pci 0000:00:09.0: transparent bridge
[ 0.680279] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
[ 0.680282] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff]
[ 0.680284] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.680387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.680478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 0.680598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
[ 0.680716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
[ 0.680830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
[ 0.684265] ACPI: PCI Root Bridge [PCI1] (0000:40)
[ 0.684313] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.684313] pci 0000:40:0b.0: PME# disabled
[ 0.684313] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.684359] pci 0000:40:0c.0: PME# disabled
[ 0.684451] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.684522] pci 0000:40:0d.0: PME# disabled
[ 0.684613] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.684684] pci 0000:40:0e.0: PME# disabled
[ 0.684776] pci 0000:40:10.0: Enabling HT MSI Mapping
[ 0.684905] pci 0000:40:11.0: Enabling HT MSI Mapping
[ 0.685156] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 0.685169] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.685189] pci 0000:41:01.0: PME# supported from D3hot D3cold
[ 0.685258] pci 0000:41:01.0: PME# disabled
[ 0.685338] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 0.685351] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.685371] pci 0000:41:02.0: PME# supported from D3hot D3cold
[ 0.685439] pci 0000:41:02.0: PME# disabled
[ 0.685523] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 0.685546] pci 0000:42:02.0: reg 10 64bit mmio: [0xdfef0000-0xdfef1fff]
[ 0.685550] pci 0000:42:02.0: reg 18 io port: [0x3000-0x30ff]
[ 0.685556] pci 0000:42:02.0: reg 1c 64bit mmio: [0xdfe80000-0xdfebffff]
[ 0.685563] pci 0000:42:02.0: reg 30 32bit mmio: [0x000000-0x03ffff]
[ 0.685583] pci 0000:42:02.0: supports D1
[ 0.685606] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff]
[ 0.685608] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.685629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
[ 0.685710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
[ 0.685921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
[ 0.686049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
[ 0.686172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
[ 0.688045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
[ 0.688308] ACPI: PCI Interrupt Link [LNKW] (IRQs 5 7 10 11) *0, disabled.
[ 0.688600] ACPI: PCI Interrupt Link [LNKX] (IRQs 5 7 10 11) *0, disabled.
[ 0.689025] ACPI: PCI Interrupt Link [LNKY] (IRQs 5 7 10 11) *0, disabled.
[ 0.692017] ACPI: PCI Interrupt Link [LNKZ] (IRQs 5 7 10 11) *0, disabled.
[ 0.692443] ACPI: PCI Interrupt Link [LNU0] (IRQs *5 7 10 11)
[ 0.692816] ACPI: PCI Interrupt Link [LNU2] (IRQs 5 7 10 *11)
[ 0.693191] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *0, disabled.
[ 0.693615] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
[ 0.694042] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
[ 0.694462] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
[ 0.694764] usbcore: registered new interface driver usbfs
[ 0.694764] usbcore: registered new interface driver hub
[ 0.696023] usbcore: registered new device driver usb
[ 0.696081] PCI: Using ACPI for IRQ routing
[ 0.696184] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.696254] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.716121] PCI-DMA: Disabling AGP.
[ 0.716292] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.716292] PCI-DMA: using GART IOMMU.
[ 0.716292] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.716911] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.717072] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.740013] Switched to high resolution mode on CPU 0
[ 0.740185] Switched to high resolution mode on CPU 4
[ 0.740200] Switched to high resolution mode on CPU 2
[ 0.740204] Switched to high resolution mode on CPU 6
[ 0.740212] Switched to high resolution mode on CPU 5
[ 0.740220] Switched to high resolution mode on CPU 1
[ 0.740234] Switched to high resolution mode on CPU 3
[ 0.740239] Switched to high resolution mode on CPU 7
[ 0.748011] pnp: PnP ACPI init
[ 0.748069] ACPI: bus type pnp registered
[ 0.754229] pnp: PnP ACPI: found 16 devices
[ 0.754292] ACPI: ACPI bus type pnp unregistered
[ 0.754366] system 00:01: ioport range 0x408-0x40f has been reserved
[ 0.754435] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.754505] system 00:01: ioport range 0x700-0x73f has been reserved
[ 0.754575] system 00:01: ioport range 0x800-0x8fe has been reserved
[ 0.754645] system 00:01: ioport range 0x900-0x9fe has been reserved
[ 0.754714] system 00:01: ioport range 0x9ff-0x9ff has been reserved
[ 0.754784] system 00:01: ioport range 0xa00-0xafe has been reserved
[ 0.754854] system 00:01: ioport range 0xaff-0xaff has been reserved
[ 0.754923] system 00:01: ioport range 0xb00-0xbfe has been reserved
[ 0.754993] system 00:01: ioport range 0xbff-0xbff has been reserved
[ 0.755063] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 0.755133] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 0.755202] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
[ 0.755273] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 0.755343] system 00:01: ioport range 0xca0-0xca1 has been reserved
[ 0.755413] system 00:01: ioport range 0xca4-0xca5 has been reserved
[ 0.755483] system 00:01: ioport range 0xc00-0xc03 has been reserved
[ 0.755552] system 00:01: ioport range 0x2f8-0x2ff has been reserved
[ 0.761161] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.761230] pci 0000:00:09.0: IO window: 0x1000-0x2fff
[ 0.761297] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff
[ 0.761366] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.761465] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08
[ 0.761534] pci 0000:00:0c.0: IO window: disabled
[ 0.761598] pci 0000:00:0c.0: MEM window: disabled
[ 0.761663] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.761730] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[ 0.761797] pci 0000:00:0d.0: IO window: disabled
[ 0.761862] pci 0000:00:0d.0: MEM window: disabled
[ 0.761926] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.761993] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.762061] pci 0000:00:0e.0: IO window: disabled
[ 0.762125] pci 0000:00:0e.0: MEM window: disabled
[ 0.762189] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.762261] pci 0000:00:09.0: setting latency timer to 64
[ 0.762264] pci 0000:00:0c.0: setting latency timer to 64
[ 0.762267] pci 0000:00:0d.0: setting latency timer to 64
[ 0.762271] pci 0000:00:0e.0: setting latency timer to 64
[ 0.762276] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f
[ 0.762343] pci 0000:40:0b.0: IO window: disabled
[ 0.762408] pci 0000:40:0b.0: MEM window: disabled
[ 0.762473] pci 0000:40:0b.0: PREFETCH window: disabled
[ 0.762541] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c
[ 0.762608] pci 0000:40:0c.0: IO window: disabled
[ 0.762673] pci 0000:40:0c.0: MEM window: disabled
[ 0.762738] pci 0000:40:0c.0: PREFETCH window: disabled
[ 0.762806] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49
[ 0.762873] pci 0000:40:0d.0: IO window: disabled
[ 0.762938] pci 0000:40:0d.0: MEM window: disabled
[ 0.763003] pci 0000:40:0d.0: PREFETCH window: disabled
[ 0.763071] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46
[ 0.763138] pci 0000:40:0e.0: IO window: disabled
[ 0.763203] pci 0000:40:0e.0: MEM window: disabled
[ 0.763268] pci 0000:40:0e.0: PREFETCH window: disabled
[ 0.763336] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41
[ 0.763404] pci 0000:40:10.0: IO window: disabled
[ 0.763469] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff
[ 0.763538] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x000000d9ffffff
[ 0.763639] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42
[ 0.763707] pci 0000:40:11.0: IO window: 0x3000-0x3fff
[ 0.763774] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.763842] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x000000de0fffff
[ 0.763944] pci 0000:40:0b.0: setting latency timer to 64
[ 0.763949] pci 0000:40:0c.0: setting latency timer to 64
[ 0.763953] pci 0000:40:0d.0: setting latency timer to 64
[ 0.763957] pci 0000:40:0e.0: setting latency timer to 64
[ 0.763964] pci_bus 0000:00: resource 0 io: [0x00-0x2fff]
[ 0.763965] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff]
[ 0.763967] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff]
[ 0.763968] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
[ 0.763970] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff]
[ 0.763972] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff]
[ 0.763974] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]
[ 0.763975] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff]
[ 0.763977] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xd7ffffff]
[ 0.763978] pci_bus 0000:01: resource 3 io: [0x00-0x2fff]
[ 0.763980] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff]
[ 0.763982] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff]
[ 0.763983] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
[ 0.763985] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff]
[ 0.763986] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff]
[ 0.763988] pci_bus 0000:08: resource 0 mem: [0x0-0x0]
[ 0.764005] pci_bus 0000:08: resource 1 mem: [0x0-0x0]
[ 0.764006] pci_bus 0000:08: resource 2 mem: [0x0-0x0]
[ 0.764008] pci_bus 0000:08: resource 3 mem: [0x0-0x0]
[ 0.764009] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
[ 0.764010] pci_bus 0000:05: resource 1 mem: [0x0-0x0]
[ 0.764012] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
[ 0.764013] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
[ 0.764015] pci_bus 0000:02: resource 0 mem: [0x0-0x0]
[ 0.764016] pci_bus 0000:02: resource 1 mem: [0x0-0x0]
[ 0.764018] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
[ 0.764019] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.764021] pci_bus 0000:40: resource 0 io: [0x3000-0xffff]
[ 0.764023] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff]
[ 0.764024] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff]
[ 0.764026] pci_bus 0000:4f: resource 0 mem: [0x0-0x0]
[ 0.764027] pci_bus 0000:4f: resource 1 mem: [0x0-0x0]
[ 0.764029] pci_bus 0000:4f: resource 2 mem: [0x0-0x0]
[ 0.764030] pci_bus 0000:4f: resource 3 mem: [0x0-0x0]
[ 0.764032] pci_bus 0000:4c: resource 0 mem: [0x0-0x0]
[ 0.764033] pci_bus 0000:4c: resource 1 mem: [0x0-0x0]
[ 0.764034] pci_bus 0000:4c: resource 2 mem: [0x0-0x0]
[ 0.764036] pci_bus 0000:4c: resource 3 mem: [0x0-0x0]
[ 0.764037] pci_bus 0000:49: resource 0 mem: [0x0-0x0]
[ 0.764039] pci_bus 0000:49: resource 1 mem: [0x0-0x0]
[ 0.764040] pci_bus 0000:49: resource 2 mem: [0x0-0x0]
[ 0.764042] pci_bus 0000:49: resource 3 mem: [0x0-0x0]
[ 0.764043] pci_bus 0000:46: resource 0 mem: [0x0-0x0]
[ 0.764045] pci_bus 0000:46: resource 1 mem: [0x0-0x0]
[ 0.764046] pci_bus 0000:46: resource 2 mem: [0x0-0x0]
[ 0.764047] pci_bus 0000:46: resource 3 mem: [0x0-0x0]
[ 0.764049] pci_bus 0000:41: resource 0 mem: [0x0-0x0]
[ 0.764050] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff]
[ 0.764052] pci_bus 0000:41: resource 2 mem: [0xd9f00000-0xd9ffffff]
[ 0.764053] pci_bus 0000:41: resource 3 mem: [0x0-0x0]
[ 0.764055] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff]
[ 0.764057] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.764058] pci_bus 0000:42: resource 2 mem: [0xde000000-0xde0fffff]
[ 0.764060] pci_bus 0000:42: resource 3 mem: [0x0-0x0]
[ 0.764271] NET: Registered protocol family 2
[ 0.836568] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.840992] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.846583] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.847318] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.847389] TCP reno registered
[ 0.856310] NET: Registered protocol family 1
[ 0.856533] checking if image is initramfs... it is
[ 1.431615] Freeing initrd memory: 8626k freed
[ 1.440313] audit: initializing netlink socket (disabled)
[ 1.440394] type=2000 audit(1246157873.440:1): initialized
[ 1.441867] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.442386] VFS: Disk quotas dquot_6.5.2
[ 1.442506] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.442683] msgmni has been set to 32173
[ 1.442938] alg: No test for stdrng (krng)
[ 1.443118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.443217] io scheduler noop registered
[ 1.443278] io scheduler anticipatory registered
[ 1.443341] io scheduler deadline registered
[ 1.443475] io scheduler cfq registered (default)
[ 1.476024] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.476101] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.476175] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.476270] pci 0000:01:03.0: Boot video device
[ 1.476286] pci 0000:01:04.4: HCRESET not completed yet!
[ 1.476379] pci 0000:40:0b.0: Found enabled HT MSI Mapping
[ 1.476457] pci 0000:40:0c.0: Found enabled HT MSI Mapping
[ 1.476535] pci 0000:40:0d.0: Found enabled HT MSI Mapping
[ 1.476613] pci 0000:40:0e.0: Found enabled HT MSI Mapping
[ 1.476907] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.476928] alloc irq_desc for 38 on cpu 0 node 0
[ 1.476930] alloc kstat_irqs on cpu 0 node 0
[ 1.476941] pcieport-driver 0000:00:0c.0: irq 38 for MSI/MSI-X
[ 1.477028] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.477046] alloc irq_desc for 39 on cpu 0 node 0
[ 1.477048] alloc kstat_irqs on cpu 0 node 0
[ 1.477053] pcieport-driver 0000:00:0d.0: irq 39 for MSI/MSI-X
[ 1.477133] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.477151] alloc irq_desc for 40 on cpu 0 node 0
[ 1.477152] alloc kstat_irqs on cpu 0 node 0
[ 1.477156] pcieport-driver 0000:00:0e.0: irq 40 for MSI/MSI-X
[ 1.477251] pcieport-driver 0000:40:0b.0: setting latency timer to 64
[ 1.477288] alloc irq_desc for 41 on cpu 0 node 0
[ 1.477291] alloc kstat_irqs on cpu 0 node 0
[ 1.477302] pcieport-driver 0000:40:0b.0: irq 41 for MSI/MSI-X
[ 1.477439] pcieport-driver 0000:40:0c.0: setting latency timer to 64
[ 1.477467] alloc irq_desc for 42 on cpu 0 node 0
[ 1.477468] alloc kstat_irqs on cpu 0 node 0
[ 1.477473] pcieport-driver 0000:40:0c.0: irq 42 for MSI/MSI-X
[ 1.477576] pcieport-driver 0000:40:0d.0: setting latency timer to 64
[ 1.477603] alloc irq_desc for 43 on cpu 0 node 0
[ 1.477605] alloc kstat_irqs on cpu 0 node 0
[ 1.477610] pcieport-driver 0000:40:0d.0: irq 43 for MSI/MSI-X
[ 1.477709] pcieport-driver 0000:40:0e.0: setting latency timer to 64
[ 1.477736] alloc irq_desc for 44 on cpu 0 node 0
[ 1.477738] alloc kstat_irqs on cpu 0 node 0
[ 1.477742] pcieport-driver 0000:40:0e.0: irq 44 for MSI/MSI-X
[ 1.482998] Linux agpgart interface v0.103
[ 1.483040] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.483223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.483368] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.483877] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.486606] brd: module loaded
[ 1.486743] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.487067] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.488782] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.488828] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.512152] mice: PS/2 mouse device common for all mice
[ 1.512303] rtc_cmos 00:0a: RTC can wake from S4
[ 1.512438] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 1.512500] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.512603] cpuidle: using governor ladder
[ 1.512644] cpuidle: using governor menu
[ 1.512689] No iBFT detected.
[ 1.513078] TCP cubic registered
[ 1.513118] NET: Registered protocol family 17
[ 1.513377] registered taskstats version 1
[ 1.513698] rtc_cmos 00:0a: setting system clock to 2009-06-28 02:57:54 UTC (1246157874)
[ 1.513822] Freeing unused kernel memory: 552k freed
[ 1.614405] processor ACPI_CPU:00: registered as cooling_device0
[ 1.614551] processor ACPI_CPU:01: registered as cooling_device1
[ 1.614678] processor ACPI_CPU:02: registered as cooling_device2
[ 1.614812] processor ACPI_CPU:03: registered as cooling_device3
[ 1.614938] processor ACPI_CPU:04: registered as cooling_device4
[ 1.615065] processor ACPI_CPU:05: registered as cooling_device5
[ 1.615193] processor ACPI_CPU:06: registered as cooling_device6
[ 1.615324] processor ACPI_CPU:07: registered as cooling_device7
[ 1.657949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.658286] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 11
[ 1.658334] PCI: setting IRQ 11 as level-triggered
[ 1.658338] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 11 (level, low) -> IRQ 11
[ 1.658443] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.658446] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.658612] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.658709] ehci_hcd 0000:00:02.1: debug port 1
[ 1.658751] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.658759] ehci_hcd 0000:00:02.1: irq 11, io mem 0xd9cd0000
[ 1.665613] Uniform Multi-Platform E-IDE driver
[ 1.670705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.672039] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.672137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.672186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.672245] usb usb1: Product: EHCI Host Controller
[ 1.672287] usb usb1: Manufacturer: Linux 2.6.29-2-amd64 ehci_hcd
[ 1.672330] usb usb1: SerialNumber: 0000:00:02.1
[ 1.672440] usb usb1: configuration #1 chosen from 1 choice
[ 1.672508] hub 1-0:1.0: USB hub found
[ 1.672557] hub 1-0:1.0: 10 ports detected
[ 1.672750] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.672794] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3)
[ 1.672851] amd74xx 0000:00:06.0: IDE port disabled
[ 1.672901] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.672950] ide0: BM-DMA at 0x0500-0x0507
[ 1.672996] Probing IDE interface ide0...
[ 1.682210] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.9.3 (March 17, 2009)
[ 1.682567] ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 10
[ 1.682613] PCI: setting IRQ 10 as level-triggered
[ 1.682617] bnx2 0000:41:01.0: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10
[ 1.694019] SCSI subsystem initialized
[ 1.698233] HP CISS Driver (v 3.6.20)
[ 1.762381] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.036014] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 2.160042] bnx2 0000:41:01.0: firmware: requesting bnx2-06-4.6.16.fw
[ 2.165414] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 10, node addr 00:1c:c4:f0:94:fa
[ 2.170717] ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 11
[ 2.170764] cciss 0000:42:02.0: PCI INT A -> Link[LNKY] -> GSI 11 (level, low) -> IRQ 11
[ 2.171216] usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
[ 2.171275] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.171399] usb 1-6: configuration #1 chosen from 1 choice
[ 2.171617] hub 1-6:1.0: USB hub found
[ 2.171735] hub 1-6:1.0: 4 ports detected
[ 2.288015] IRQ 11/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 2.288077] cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 11 using DAC
[ 2.289014] blocks= 286677120 block_size= 512
[ 2.289141] heads=255, sectors=32, cylinders=35132
[ 2.289142]
[ 2.289463] blocks= 286677120 block_size= 512
[ 2.289584] heads=255, sectors=32, cylinders=35132
[ 2.289585]
[ 2.289675] cciss/c0d0: p1 p2
[ 2.290205] blocks= 860051248 block_size= 512
[ 2.290310] heads=255, sectors=32, cylinders=105399
[ 2.290311]
[ 2.290568] blocks= 860051248 block_size= 512
[ 2.290684] heads=255, sectors=32, cylinders=105399
[ 2.290685]
[ 2.290776] cciss/c0d1: unknown partition table
[ 2.303181] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 10
[ 2.303228] bnx2 0000:41:02.0: PCI INT A -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
[ 2.416129] hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
[ 2.748059] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.748840] hda: UDMA/33 mode selected
[ 2.749272] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.749407] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
[ 2.749478] uhci_hcd 0000:01:04.4: UHCI Host Controller
[ 2.749617] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2
[ 2.749684] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[ 2.749740] uhci_hcd 0000:01:04.4: HCRESET not completed yet!
[ 2.749797] uhci_hcd 0000:01:04.4: irq 10, io base 0x00001800
[ 2.749888] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.749941] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.750004] usb usb2: Product: UHCI Host Controller
[ 2.750046] usb usb2: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd
[ 2.750089] usb usb2: SerialNumber: 0000:01:04.4
[ 2.750174] usb usb2: configuration #1 chosen from 1 choice
[ 2.750243] hub 2-0:1.0: USB hub found
[ 2.750288] hub 2-0:1.0: 2 ports detected
[ 2.750700] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 5
[ 2.750743] PCI: setting IRQ 5 as level-triggered
[ 2.750747] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 5 (level, low) -> IRQ 5
[ 2.750845] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.750847] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.750948] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 2.751023] ohci_hcd 0000:00:02.0: irq 5, io mem 0xd9ce0000
[ 2.780274] bnx2 0000:41:02.0: firmware: requesting bnx2-06-4.6.16.fw
[ 2.785730] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 10, node addr 00:1c:c4:f0:94:fc
[ 2.806032] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.806086] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.806145] usb usb3: Product: OHCI Host Controller
[ 2.806186] usb usb3: Manufacturer: Linux 2.6.29-2-amd64 ohci_hcd
[ 2.806229] usb usb3: SerialNumber: 0000:00:02.0
[ 2.806352] usb usb3: configuration #1 chosen from 1 choice
[ 2.806420] hub 3-0:1.0: USB hub found
[ 2.806468] hub 3-0:1.0: 10 ports detected
[ 2.819166] libata version 3.00 loaded.
[ 2.827113] ide-cd driver 5.00
[ 2.829247] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 2.829435] Uniform CD-ROM driver Revision: 3.20
[ 2.910065] device-mapper: uevent: version 1.0.3
[ 2.910249] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.943632] kjournald starting. Commit interval 5 seconds
[ 2.943642] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.060014] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.206861] usb 2-1: New USB device found, idVendor=03f0, idProduct=1027
[ 3.206921] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.206967] usb 2-1: Product: Virtual Keyboard
[ 3.207007] usb 2-1: Manufacturer: HP
[ 3.207126] usb 2-1: configuration #1 chosen from 1 choice
[ 3.324023] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 3.471454] usb 2-2: New USB device found, idVendor=03f0, idProduct=1327
[ 3.471514] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.471560] usb 2-2: Product: Virtual Hub
[ 3.471600] usb 2-2: Manufacturer: HP
[ 3.471716] usb 2-2: configuration #1 chosen from 1 choice
[ 3.476940] hub 2-2:1.0: USB hub found
[ 3.479146] hub 2-2:1.0: 7 ports detected
[ 3.660188] udev: starting version 141
[ 3.672022] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 3.717779] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.733288] ACPI: Power Button (FF) [PWRF]
[ 3.756072] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 3.764269] hpilo 0000:01:04.2: PCI INT B -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
[ 3.786787] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.803472] ipmi message handler version 39.2
[ 3.810775] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 3.810913] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[ 3.811017] k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
[ 3.811127] k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
[ 3.827837] shpchp 0000:40:10.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
[ 3.827905] shpchp 0000:40:10.0: Cannot reserve MMIO region
[ 3.827975] shpchp 0000:40:11.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
[ 3.828037] shpchp 0000:40:11.0: Cannot reserve MMIO region
[ 3.828108] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.843713] IPMI System Interface driver.
[ 3.843761] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 3.849065] usbcore: registered new interface driver hiddev
[ 3.853184] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.0/input/input3
[ 3.888172] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
[ 3.891045] usb 3-3: New USB device found, idVendor=0624, idProduct=0341
[ 3.891103] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.891149] usb 3-3: Product: HP 336047-B21
[ 3.891188] usb 3-3: Manufacturer: Avocent
[ 3.891316] usb 3-3: configuration #1 chosen from 1 choice
[ 3.901667] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.1/input/input4
[ 3.937388] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.940117] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[ 3.946242] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 3.946310] IPMI kcs interface initialized
[ 3.946360] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 3.946423] ipmi_si: duplicate interface
[ 3.947321] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input5
[ 3.960092] ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10
[ 3.960158] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, slave address 0x0, irq 10
[ 3.976097] generic-usb 0003:0624:0341.0003: input,hidraw2: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input0
[ 3.984450] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input6
[ 4.037055] generic-usb 0003:0624:0341.0004: input,hidraw3: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input1
[ 4.037144] usbcore: registered new interface driver usbhid
[ 4.037188] usbhid: v2.6:USB HID core driver
[ 4.044016] IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
[ 4.044067] Using irq 10
[ 4.244525] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 4.244614] IPMI kcs interface initialized
[ 5.541780] EXT3 FS on cciss/c0d0p1, internal journal
[ 6.490708] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 6.490770] All bugs added by David S. Miller <davem@redhat.com>
[ 6.501484] ipmi device interface
[ 7.581197] kjournald starting. Commit interval 5 seconds
[ 7.581313] EXT3 FS on dm-1, internal journal
[ 7.581393] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.601860] kjournald starting. Commit interval 5 seconds
[ 7.601977] EXT3 FS on dm-2, internal journal
[ 7.602055] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.633870] kjournald starting. Commit interval 5 seconds
[ 7.634010] EXT3 FS on dm-4, internal journal
[ 7.634084] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.641979] kjournald starting. Commit interval 5 seconds
[ 7.652121] EXT3 FS on dm-0, internal journal
[ 7.652201] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.752963] Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k
[ 8.216114] NET: Registered protocol family 15
[ 8.231384] alg: No test for cipher_null (cipher_null-generic)
[ 8.231512] alg: No test for digest_null (digest_null-generic)
[ 8.231595] alg: No test for compress_null (compress_null-generic)
[ 8.615567] NET: Registered protocol family 10
[ 8.616350] lo: Disabled Privacy Extensions
[ 8.633924] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[ 8.633975] bonding: MII link monitoring set to 100 ms
[ 8.672186] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 8.675086] bonding: bond0: Adding slave eth0.
[ 8.812032] bonding: bond0: enslaving eth0 as a backup interface with a down link.
[ 8.814592] bonding: bond0: Adding slave eth1.
[ 8.944136] bonding: bond0: enslaving eth1 as a backup interface with a down link.
[ 9.368629] Initializing XFRM netlink socket
[ 11.880402] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[ 11.964017] bonding: bond0: link status up for interface eth0, enabling it in 10000 ms.
[ 12.067990] bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
[ 12.164013] bonding: bond0: link status up for interface eth1, enabling it in 10000 ms.
[ 21.964014] bonding: bond0: link status definitely up for interface eth0.
[ 21.964064] bonding: bond0: making interface eth0 the new active one.
[ 21.964159] bonding: bond0: first active interface up!
[ 21.967154] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 22.164014] bonding: bond0: link status definitely up for interface eth1.
[ 32.348014] bond0: no IPv6 routers present
[ 34.821259] Fusion MPT base driver 3.04.07
[ 34.821434] Copyright (c) 1999-2008 LSI Corporation
[ 34.823818] Fusion MPT misc device (ioctl) driver 3.04.07
[ 34.824041] mptctl: Registered with Fusion MPT base driver
[ 34.824219] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 37.029775] lp: driver loaded but no devices found
[ 37.041141] ppdev: user-space parallel port driver
[-- Attachment #4: lspci-output --]
[-- Type: text/plain, Size: 3549 bytes --]
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev b1)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:1a.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:1a.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:1a.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:1a.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
00:1b.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:1b.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:1b.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:1b.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03)
01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03)
01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller
01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART
40:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
40:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev b1)
40:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
40:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
40:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
40:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
40:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12)
40:10.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12)
40:11.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12)
40:11.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12)
41:01.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02)
41:02.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02)
42:02.0 RAID bus controller: Hewlett-Packard Company Smart Array P600
[-- Attachment #5: proc-interrupts --]
[-- Type: text/plain, Size: 2684 bytes --]
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 45 1 0 0 1 0 0 0 XT-PIC-XT timer
1: 2 0 0 0 0 0 0 0 XT-PIC-XT i8042
2: 0 0 0 0 0 0 0 0 XT-PIC-XT cascade
3: 4 0 1 0 2 0 1 0 XT-PIC-XT serial
4: 4 0 0 0 2 0 0 0 XT-PIC-XT
5: 20 1 5 0 10 0 1 0 XT-PIC-XT ohci_hcd:usb3
7: 10336 96993 100292 100678 98680 100812 100704 101045 XT-PIC-XT
8: 1 0 0 0 0 0 0 0 XT-PIC-XT rtc0
9: 0 0 0 0 0 0 0 0 XT-PIC-XT acpi
10: 59622 2604 485 547 1719 324 278 251 XT-PIC-XT uhci_hcd:usb2, ipmi_si, eth0, eth1
11: 23514 1731 541 100 978 200 395 24 XT-PIC-XT ehci_hcd:usb1, cciss0
12: 3 1 0 0 0 0 0 0 XT-PIC-XT i8042
14: 7924 65 58 2 29 10 20 1 XT-PIC-XT ide0
NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 336945 208438 267680 138102 30869 39594 481144 70316 Local timer interrupts
RES: 13214 6855 9075 4379 12955 13070 23612 13817 Rescheduling interrupts
CAL: 91 212 217 230 218 217 223 223 Function call interrupts
TLB: 1986 613 559 447 2931 4132 3842 3516 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
ERR: 709540
MIS: 0
[-- Attachment #6: server-info --]
[-- Type: text/plain, Size: 1165 bytes --]
System : ProLiant DL585 G2
Serial No. : XXXXXXXXXXXXXX
ROM version : A07 03/11/2009
iLo present : Yes
Embedded NICs : 2
NIC1 MAC: XXXXXXXXXXXXXXXXX
NIC2 MAC: XXXXXXXXXXXXXXXXX
Processor: 0
Name : AMD Opteron
Stepping : 3
Speed : 2800 MHz
Bus : 0 MHz
Core : 2
Thread : 2
Socket : 1
Level2 Cache : 2048 KBytes
Status : Ok
Processor: 1
Name : AMD Opteron
Stepping : 3
Speed : 2800 MHz
Bus : 0 MHz
Core : 2
Thread : 2
Socket : 2
Level2 Cache : 2048 KBytes
Status : Ok
Processor: 2
Name : AMD Opteron
Stepping : 3
Speed : 2800 MHz
Bus : 0 MHz
Core : 2
Thread : 2
Socket : 3
Level2 Cache : 2048 KBytes
Status : Ok
Processor: 3
Name : AMD Opteron
Stepping : 3
Speed : 2800 MHz
Bus : 0 MHz
Core : 2
Thread : 2
Socket : 4
Level2 Cache : 2048 KBytes
Status : Ok
Processor total : 4
Memory installed : 16384 MBytes
ECC supported : Yes
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: ACPI issues on HP DL585 G2
2009-06-28 3:40 ACPI issues on HP DL585 G2 Stephen Frost
@ 2009-06-28 4:26 ` Yinghai Lu
2009-06-28 14:17 ` Stephen Frost
2009-06-28 22:31 ` Stephen Frost
2009-06-28 17:20 ` Alex Chiang
1 sibling, 2 replies; 26+ messages in thread
From: Yinghai Lu @ 2009-06-28 4:26 UTC (permalink / raw)
To: Stephen Frost; +Cc: linux-kernel
On Sat, Jun 27, 2009 at 8:40 PM, Stephen Frost<sfrost@snowman.net> wrote:
> Greetings,
>
> When running pretty much anything newer than 2.6.22, both the cciss
> module and the bnx2 module get stuck in a "Loading" state in
> /proc/modules. As cciss contains my root partition, I get dropped
> into an initrd after a while because root can't be found. After some
> googleing, etc, I saw a bunch of recommendations to add
> "pci=noapic noapic" to the command-line. After I did that, the box
> booted fine under 2.6.29. I figured people might like to hear about
> this issue though. Attached are a dmesg from 2.6.22 and a dmesg from
> 2.6.29 (w/ the noapic options). I've also included the output of
> hpasmcli -s "show server". If there's anything else that would be
> useful to help figure this out, please let me know.
[ 0.000000] nr_irqs_gsi: 38
in madt
ACPI: IOAPIC (id[0x08] address[0xf7cf0000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xf7cf0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xf7fd0000] gsi_base[24])
IOAPIC[1]: apic_id 9, address 0xf7fd0000, GSI 24-30
ACPI: IOAPIC (id[0x0a] address[0xf7fe0000] gsi_base[31])
IOAPIC[2]: apic_id 10, address 0xf7fe0000, GSI 31-37
ACPI: IOAPIC (id[0x0b] address[0xf7ff0000] gsi_base[38])
IOAPIC[3]: apic_id 11, address 0xf7ff0000, GSI 38-61
please try to 2.6.29.x stable
or
try 2.6.30
YH
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-28 4:26 ` Yinghai Lu
@ 2009-06-28 14:17 ` Stephen Frost
2009-06-28 22:31 ` Stephen Frost
1 sibling, 0 replies; 26+ messages in thread
From: Stephen Frost @ 2009-06-28 14:17 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 346 bytes --]
Yinghai,
* Yinghai Lu (yhlu.kernel@gmail.com) wrote:
> please try to 2.6.29.x stable
> try 2.6.30
Thanks for the suggestion. Technically, it's Debian kernel 2.6.29-4,
which includes 2.6.29.2. Is there a specific change in a later version
that fixes this issue?
I'll try and schedule downtime to try a later kernel soon.
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-28 4:26 ` Yinghai Lu
2009-06-28 14:17 ` Stephen Frost
@ 2009-06-28 22:31 ` Stephen Frost
2009-06-29 1:49 ` Yinghai Lu
1 sibling, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-06-28 22:31 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 381 bytes --]
Yinghai,
* Yinghai Lu (yhlu.kernel@gmail.com) wrote:
> try 2.6.30
dmesg from 2.6.30 (w/ pci=noapic noapic) attached. Box didn't boot
again, but we did get a "hung process" message from the kernel after a
while. I don't have more info than that about the boot w/o pci=noapic
noapic, sorry. I can try and get that info at another time if this
isn't enough.
Thanks,
Stephen
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: dmesg-no-apic-2.6.30 --]
[-- Type: text/plain; charset=utf-8, Size: 58842 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009
[ 0.000000] Command line: root=/dev/cciss/c0d0p1 ro pci=noapic noapic
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)
[ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)
[ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
[ 0.000000] PCI: Unknown option `noapic'
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000480000000 aka 18432M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fe57000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000
[ 0.000000] 0100000000 - 047fe00000 page 2M
[ 0.000000] 047fe00000 - 047ffff000 page 4k
[ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000
[ 0.000000] RAMDISK: 3772d000 - 37fef723
[ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000007fe4ed00 00074 (v01 HP ProLiant 00000002 Ò\x04 0000162E)
[ 0.000000] ACPI: FACP 000000007fe4ed80 000F4 (v03 HP A07 00000002 Ò\x04 0000162E)
[ 0.000000] ACPI: DSDT 000000007fe4ee80 0498A (v01 HP DSDT 00000001 INTL 20030228)
[ 0.000000] ACPI: FACS 000000007fe4e100 00040
[ 0.000000] ACPI: SPCR 000000007fe4e140 00050 (v01 HP SPCRRBSU 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: HPET 000000007fe4e1c0 00038 (v01 HP ProLiant 00000002 Ò\x04 0000162E)
[ 0.000000] ACPI: SPMI 000000007fe4e200 00040 (v05 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: ERST 000000007fe4e240 001D0 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: APIC 000000007fe4e440 000C6 (v01 HP ProLiant 00000002 00000000)
[ 0.000000] ACPI: SRAT 000000007fe4e580 001A0 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: FFFF 000000007fe4e980 00176 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: BERT 000000007fe4eb00 00030 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: HEST 000000007fe4eb40 00170 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000
[ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000
[ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000
[ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000
[ 0.000000] NUMA: Allocated memnodemap from 19000 - 22040
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000
[ 0.000000] NODE_DATA [0000000000022040 - 000000000002a03f]
[ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0180000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc]
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK ==> [003772d000 - 0037fef723]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [00007da000 - 00007da114] BRK ==> [00007da000 - 00007da114]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE ==> [000000a000 - 0000019000]
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP ==> [0000019000 - 0000022040]
[ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000
[ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff]
[ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0180000000 - 0280000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000
[ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff]
[ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0280000000 - 0380000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000
[ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff]
[ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0380000000 - 047ffff000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80
[ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
[ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
[ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff880280200000-ffff8802839fffff] on node 2
[ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff880380200000-ffff8803839fffff] on node 3
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0047ffff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe4e
[ 0.000000] 0: 0x0007fe56 -> 0x0007fe57
[ 0.000000] 0: 0x00100000 -> 0x00180000
[ 0.000000] 1: 0x00180000 -> 0x00280000
[ 0.000000] 2: 0x00280000 -> 0x00380000
[ 0.000000] 3: 0x00380000 -> 0x0047ffff
[ 0.000000] On node 0 totalpages: 1048046
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1622 pages reserved
[ 0.000000] DMA zone: 2321 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 517120 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034239 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: HP
[ 0.000000] MPTABLE: Product ID: PROLIANT
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #8 Version 32 at 0xD9CF0000.
[ 0.000000] I/O APIC #9 Version 32 at 0xD9FD0000.
[ 0.000000] I/O APIC #10 Version 32 at 0xD9FE0000.
[ 0.000000] Processors: 8
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 38
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe56000
[ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Allocated 19 4k pages, static data 76256 bytes
[ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 4127639
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/cciss/c0d0p1 ro pci=noapic noapic
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:710
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2812.754 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 16463800k/18874364k available (2782k kernel code, 2099272k absent, 311292k reserved, 1398k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.50 BogoMIPS (lpj=11251016)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014472] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.020421] Mount-cache hash table entries: 256
[ 0.020747] Initializing cgroup subsys ns
[ 0.020811] Initializing cgroup subsys cpuacct
[ 0.020876] Initializing cgroup subsys devices
[ 0.020939] Initializing cgroup subsys freezer
[ 0.021002] Initializing cgroup subsys net_cls
[ 0.021117] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.021189] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.021253] CPU 0/0x0 -> Node 0
[ 0.021312] tseg: 0000000000
[ 0.021325] CPU: Physical Processor ID: 0
[ 0.021386] CPU: Processor Core ID: 0
[ 0.021454] using C1E aware idle routine
[ 0.022097] ACPI: Core revision 20090320
[ 0.030314] ACPI: setting ELCR to 0200 (from 8c20)
[ 0.030604] Setting APIC routing to flat
[ 0.030670] CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.032001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5625.90 BogoMIPS (lpj=11251814)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 1/0x2 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.116602] CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.117461] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5625.85 BogoMIPS (lpj=11251703)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 2/0x4 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.208627] CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.209509] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5625.88 BogoMIPS (lpj=11251771)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 3/0x6 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.300702] CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.301486] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#4
[ 0.004000] Calibrating delay using timer specific routine.. 5625.92 BogoMIPS (lpj=11251846)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 4/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.392533] CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.393375] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#5
[ 0.004000] Calibrating delay using timer specific routine.. 5625.85 BogoMIPS (lpj=11251704)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 5/0x3 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.484620] CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.485462] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.004000] Initializing CPU#6
[ 0.004000] Calibrating delay using timer specific routine.. 5625.84 BogoMIPS (lpj=11251693)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 6/0x5 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.576609] CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.577468] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.004000] Initializing CPU#7
[ 0.004000] Calibrating delay using timer specific routine.. 5625.91 BogoMIPS (lpj=11251837)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 7/0x7 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.668713] CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.669370] Brought up 8 CPUs
[ 0.669429] Total of 8 processors activated (45006.69 BogoMIPS).
[ 0.669610] CPU0 attaching sched-domain:
[ 0.669612] domain 0: span 0,4 level CPU
[ 0.669614] groups: 0 4
[ 0.669618] domain 1: span 0-7 level NODE
[ 0.669620] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[ 0.669628] CPU1 attaching sched-domain:
[ 0.669630] domain 0: span 1,5 level CPU
[ 0.669632] groups: 1 5
[ 0.669635] domain 1: span 0-7 level NODE
[ 0.669636] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[ 0.669644] CPU2 attaching sched-domain:
[ 0.669646] domain 0: span 2,6 level CPU
[ 0.669648] groups: 2 6
[ 0.669651] domain 1: span 0-7 level NODE
[ 0.669652] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[ 0.669660] CPU3 attaching sched-domain:
[ 0.669662] domain 0: span 3,7 level CPU
[ 0.669663] groups: 3 7
[ 0.669666] domain 1: span 0-7 level NODE
[ 0.669668] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[ 0.669676] CPU4 attaching sched-domain:
[ 0.669678] domain 0: span 0,4 level CPU
[ 0.669679] groups: 4 0
[ 0.669682] domain 1: span 0-7 level NODE
[ 0.669684] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[ 0.669692] CPU5 attaching sched-domain:
[ 0.669693] domain 0: span 1,5 level CPU
[ 0.669695] groups: 5 1
[ 0.669698] domain 1: span 0-7 level NODE
[ 0.669700] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[ 0.669707] CPU6 attaching sched-domain:
[ 0.669709] domain 0: span 2,6 level CPU
[ 0.669711] groups: 6 2
[ 0.669714] domain 1: span 0-7 level NODE
[ 0.669715] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[ 0.669723] CPU7 attaching sched-domain:
[ 0.669725] domain 0: span 3,7 level CPU
[ 0.669727] groups: 7 3
[ 0.669730] domain 1: span 0-7 level NODE
[ 0.669731] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[ 0.669940] net_namespace: 1936 bytes
[ 0.669940] Booting paravirtualized kernel on bare hardware
[ 0.669940] regulator: core version 0.5
[ 0.669940] NET: Registered protocol family 16
[ 0.669940] node 0 link 1: io port [1000, 2fff]
[ 0.669940] node 1 link 2: io port [3000, ffff]
[ 0.669940] TOM: 0000000080000000 aka 2048M
[ 0.669940] node 0 link 1: mmio [d0000000, d9efffff]
[ 0.669940] node 1 link 2: mmio [d9f00000, dfefffff]
[ 0.669940] node 0 link 1: mmio [e0000000, e3ffffff]
[ 0.669940] node 1 link 2: mmio [e4000000, e7ffffff]
[ 0.669940] node 0 link 1: mmio [a0000, bffff]
[ 0.669940] TOM2: 0000000480000000 aka 18432M
[ 0.669940] bus: [00,3f] on node 0 link 1
[ 0.669940] bus: 00 index 0 io port: [0, 2fff]
[ 0.669940] bus: 00 index 1 mmio: [80000000, d9efffff]
[ 0.669940] bus: 00 index 2 mmio: [dff00000, e3ffffff]
[ 0.669940] bus: 00 index 3 mmio: [a0000, bffff]
[ 0.669940] bus: 00 index 4 mmio: [e8000000, ffffffff]
[ 0.669940] bus: 00 index 5 mmio: [480000000, fcffffffff]
[ 0.669940] bus: [40,7f] on node 1 link 2
[ 0.669940] bus: 40 index 0 io port: [3000, ffff]
[ 0.669940] bus: 40 index 1 mmio: [d9f00000, dfefffff]
[ 0.669940] bus: 40 index 2 mmio: [e4000000, e7ffffff]
[ 0.669940] ACPI: bus type pci registered
[ 0.672026] PCI: Using configuration type 1 for base access
[ 0.672074] PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort.
[ 0.672266] bio: create slab <bio-0> at 0
[ 0.672384] ACPI: EC: Look up EC in DSDT
[ 0.680244] ACPI: SSDT 000000007fe58000 00AC4 (v02 HP PNOWSSDT 00000002 HP 00000001)
[ 0.680949] ACPI: Interpreter enabled
[ 0.681010] ACPI: (supports S0 S4 S5)
[ 0.681164] ACPI: Using PIC for interrupt routing
[ 0.688194] ACPI: No dock devices found.
[ 0.688249] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.688327] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff]
[ 0.688327] pci 0000:00:02.0: supports D1 D2
[ 0.688327] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.688327] pci 0000:00:02.0: PME# disabled
[ 0.688327] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff]
[ 0.688327] pci 0000:00:02.1: supports D1 D2
[ 0.688327] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.688327] pci 0000:00:02.1: PME# disabled
[ 0.688331] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f]
[ 0.688370] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.688415] pci 0000:00:0c.0: PME# disabled
[ 0.688476] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.688522] pci 0000:00:0d.0: PME# disabled
[ 0.688581] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.688626] pci 0000:00:0e.0: PME# disabled
[ 0.688906] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.688911] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
[ 0.688916] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff]
[ 0.688930] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.688942] pci 0000:01:03.0: supports D1 D2
[ 0.688965] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
[ 0.688970] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff]
[ 0.688996] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 0.689066] pci 0000:01:04.0: PME# disabled
[ 0.689154] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
[ 0.689160] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff]
[ 0.689165] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff]
[ 0.689171] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff]
[ 0.689183] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.689197] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[ 0.689267] pci 0000:01:04.2: PME# disabled
[ 0.689368] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
[ 0.689389] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
[ 0.689459] pci 0000:01:04.4: PME# disabled
[ 0.689543] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff]
[ 0.689571] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
[ 0.689640] pci 0000:01:04.6: PME# disabled
[ 0.689728] pci 0000:00:09.0: transparent bridge
[ 0.689792] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
[ 0.689794] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff]
[ 0.689797] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 0.689900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.689980] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 0.690088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
[ 0.690189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
[ 0.690290] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
[ 0.692195] ACPI: PCI Root Bridge [PCI1] (0000:40)
[ 0.692294] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.692294] pci 0000:40:0b.0: PME# disabled
[ 0.692294] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.692357] pci 0000:40:0c.0: PME# disabled
[ 0.692450] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.692521] pci 0000:40:0d.0: PME# disabled
[ 0.692613] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.692684] pci 0000:40:0e.0: PME# disabled
[ 0.692781] pci 0000:40:10.0: Enabling HT MSI Mapping
[ 0.696067] pci 0000:40:11.0: Enabling HT MSI Mapping
[ 0.696330] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 0.696343] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.696356] pci 0000:41:01.0: PME# supported from D3hot D3cold
[ 0.696425] pci 0000:41:01.0: PME# disabled
[ 0.696512] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 0.696525] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.696538] pci 0000:41:02.0: PME# supported from D3hot D3cold
[ 0.696607] pci 0000:41:02.0: PME# disabled
[ 0.696692] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 0.696723] pci 0000:42:02.0: reg 10 64bit mmio: [0xdfef0000-0xdfef1fff]
[ 0.696727] pci 0000:42:02.0: reg 18 io port: [0x3000-0x30ff]
[ 0.696733] pci 0000:42:02.0: reg 1c 64bit mmio: [0xdfe80000-0xdfebffff]
[ 0.696740] pci 0000:42:02.0: reg 30 32bit mmio: [0x000000-0x03ffff]
[ 0.696753] pci 0000:42:02.0: supports D1
[ 0.696776] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff]
[ 0.696779] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.696798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
[ 0.696871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
[ 0.697061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
[ 0.697172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
[ 0.697287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
[ 0.697392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
[ 0.697626] ACPI: PCI Interrupt Link [LNKW] (IRQs 5 7 10 11) *0, disabled.
[ 0.700166] ACPI: PCI Interrupt Link [LNKX] (IRQs 5 7 10 11) *0, disabled.
[ 0.704167] ACPI: PCI Interrupt Link [LNKY] (IRQs 5 7 10 11) *0, disabled.
[ 0.704580] ACPI: PCI Interrupt Link [LNKZ] (IRQs 5 7 10 11) *0, disabled.
[ 0.704995] ACPI: PCI Interrupt Link [LNU0] (IRQs *5 7 10 11)
[ 0.705360] ACPI: PCI Interrupt Link [LNU2] (IRQs 5 7 10 *11)
[ 0.708280] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *0, disabled.
[ 0.708695] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
[ 0.709112] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
[ 0.709526] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
[ 0.709823] usbcore: registered new interface driver usbfs
[ 0.709823] usbcore: registered new interface driver hub
[ 0.709823] usbcore: registered new device driver usb
[ 0.709823] PCI: Using ACPI for IRQ routing
[ 0.709823] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.709823] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.724118] PCI-DMA: Disabling AGP.
[ 0.724292] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.724292] PCI-DMA: using GART IOMMU.
[ 0.724292] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.724831] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.724993] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.744012] Switched to high resolution mode on CPU 0
[ 0.744506] Switched to high resolution mode on CPU 4
[ 0.744592] Switched to high resolution mode on CPU 2
[ 0.744597] Switched to high resolution mode on CPU 6
[ 0.744613] Switched to high resolution mode on CPU 1
[ 0.744620] Switched to high resolution mode on CPU 5
[ 0.744723] Switched to high resolution mode on CPU 3
[ 0.744733] Switched to high resolution mode on CPU 7
[ 0.756010] pnp: PnP ACPI init
[ 0.756089] ACPI: bus type pnp registered
[ 0.761634] pnp: PnP ACPI: found 16 devices
[ 0.761697] ACPI: ACPI bus type pnp unregistered
[ 0.761773] system 00:01: ioport range 0x408-0x40f has been reserved
[ 0.761844] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.761914] system 00:01: ioport range 0x700-0x73f has been reserved
[ 0.761985] system 00:01: ioport range 0x800-0x8fe has been reserved
[ 0.762055] system 00:01: ioport range 0x900-0x9fe has been reserved
[ 0.762125] system 00:01: ioport range 0x9ff-0x9ff has been reserved
[ 0.762195] system 00:01: ioport range 0xa00-0xafe has been reserved
[ 0.762266] system 00:01: ioport range 0xaff-0xaff has been reserved
[ 0.762336] system 00:01: ioport range 0xb00-0xbfe has been reserved
[ 0.762406] system 00:01: ioport range 0xbff-0xbff has been reserved
[ 0.762476] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 0.762547] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 0.762617] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
[ 0.762689] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 0.762759] system 00:01: ioport range 0xca0-0xca1 has been reserved
[ 0.762830] system 00:01: ioport range 0xca4-0xca5 has been reserved
[ 0.762900] system 00:01: ioport range 0xc00-0xc03 has been reserved
[ 0.762970] system 00:01: ioport range 0x2f8-0x2ff has been reserved
[ 0.768472] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.768541] pci 0000:00:09.0: IO window: 0x1000-0x2fff
[ 0.768608] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff
[ 0.768678] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 0.768777] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08
[ 0.768845] pci 0000:00:0c.0: IO window: disabled
[ 0.768910] pci 0000:00:0c.0: MEM window: disabled
[ 0.768975] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.769042] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[ 0.769110] pci 0000:00:0d.0: IO window: disabled
[ 0.769175] pci 0000:00:0d.0: MEM window: disabled
[ 0.769240] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.769309] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.769376] pci 0000:00:0e.0: IO window: disabled
[ 0.769441] pci 0000:00:0e.0: MEM window: disabled
[ 0.769509] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.769581] pci 0000:00:09.0: setting latency timer to 64
[ 0.769585] pci 0000:00:0c.0: setting latency timer to 64
[ 0.769588] pci 0000:00:0d.0: setting latency timer to 64
[ 0.769591] pci 0000:00:0e.0: setting latency timer to 64
[ 0.769597] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f
[ 0.769665] pci 0000:40:0b.0: IO window: disabled
[ 0.769731] pci 0000:40:0b.0: MEM window: disabled
[ 0.769796] pci 0000:40:0b.0: PREFETCH window: disabled
[ 0.769864] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c
[ 0.769932] pci 0000:40:0c.0: IO window: disabled
[ 0.769997] pci 0000:40:0c.0: MEM window: disabled
[ 0.770062] pci 0000:40:0c.0: PREFETCH window: disabled
[ 0.770130] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49
[ 0.770198] pci 0000:40:0d.0: IO window: disabled
[ 0.770263] pci 0000:40:0d.0: MEM window: disabled
[ 0.770328] pci 0000:40:0d.0: PREFETCH window: disabled
[ 0.770396] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46
[ 0.770464] pci 0000:40:0e.0: IO window: disabled
[ 0.770529] pci 0000:40:0e.0: MEM window: disabled
[ 0.770594] pci 0000:40:0e.0: PREFETCH window: disabled
[ 0.770663] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41
[ 0.770731] pci 0000:40:10.0: IO window: disabled
[ 0.770797] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff
[ 0.770866] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x000000d9ffffff
[ 0.770967] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42
[ 0.771036] pci 0000:40:11.0: IO window: 0x3000-0x3fff
[ 0.771103] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.771173] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x000000de0fffff
[ 0.771275] pci 0000:40:0b.0: setting latency timer to 64
[ 0.771279] pci 0000:40:0c.0: setting latency timer to 64
[ 0.771283] pci 0000:40:0d.0: setting latency timer to 64
[ 0.771288] pci 0000:40:0e.0: setting latency timer to 64
[ 0.771294] pci_bus 0000:00: resource 0 io: [0x00-0x2fff]
[ 0.771296] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff]
[ 0.771299] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff]
[ 0.771301] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
[ 0.771303] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff]
[ 0.771305] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff]
[ 0.771307] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]
[ 0.771309] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff]
[ 0.771311] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 0.771313] pci_bus 0000:01: resource 3 io: [0x00-0x2fff]
[ 0.771315] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff]
[ 0.771317] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff]
[ 0.771319] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
[ 0.771321] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff]
[ 0.771323] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff]
[ 0.771326] pci_bus 0000:40: resource 0 io: [0x3000-0xffff]
[ 0.771328] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff]
[ 0.771330] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff]
[ 0.771333] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff]
[ 0.771335] pci_bus 0000:41: resource 2 pref mem [0xd9f00000-0xd9ffffff]
[ 0.771337] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff]
[ 0.771339] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.771341] pci_bus 0000:42: resource 2 pref mem [0xde000000-0xde0fffff]
[ 0.771558] NET: Registered protocol family 2
[ 0.824548] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.828927] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.834765] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.835482] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.835554] TCP reno registered
[ 0.856271] NET: Registered protocol family 1
[ 0.856412] Trying to unpack rootfs image as initramfs...
[ 1.114138] Freeing initrd memory: 8969k freed
[ 1.122618] audit: initializing netlink socket (disabled)
[ 1.122702] type=2000 audit(1246228060.120:1): initialized
[ 1.124178] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.124695] VFS: Disk quotas dquot_6.5.2
[ 1.124817] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.124985] msgmni has been set to 32173
[ 1.125420] alg: No test for stdrng (krng)
[ 1.125596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.125696] io scheduler noop registered
[ 1.125760] io scheduler anticipatory registered
[ 1.125823] io scheduler deadline registered
[ 1.125958] io scheduler cfq registered (default)
[ 1.156025] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 1.156078] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 1.156153] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 1.156252] pci 0000:01:03.0: Boot video device
[ 1.156269] pci 0000:01:04.4: HCRESET not completed yet!
[ 1.156361] pci 0000:40:0b.0: Found enabled HT MSI Mapping
[ 1.156440] pci 0000:40:0c.0: Found enabled HT MSI Mapping
[ 1.156520] pci 0000:40:0d.0: Found enabled HT MSI Mapping
[ 1.156599] pci 0000:40:0e.0: Found enabled HT MSI Mapping
[ 1.156920] alloc irq_desc for 38 on cpu 0 node 0
[ 1.156922] alloc kstat_irqs on cpu 0 node 0
[ 1.156932] pcieport-driver 0000:00:0c.0: irq 38 for MSI/MSI-X
[ 1.156938] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.157065] alloc irq_desc for 39 on cpu 0 node 0
[ 1.157067] alloc kstat_irqs on cpu 0 node 0
[ 1.157071] pcieport-driver 0000:00:0d.0: irq 39 for MSI/MSI-X
[ 1.157076] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.157185] alloc irq_desc for 40 on cpu 0 node 0
[ 1.157187] alloc kstat_irqs on cpu 0 node 0
[ 1.157193] pcieport-driver 0000:00:0e.0: irq 40 for MSI/MSI-X
[ 1.157197] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.157341] alloc irq_desc for 41 on cpu 0 node 0
[ 1.157345] alloc kstat_irqs on cpu 0 node 0
[ 1.157358] pcieport-driver 0000:40:0b.0: irq 41 for MSI/MSI-X
[ 1.157366] pcieport-driver 0000:40:0b.0: setting latency timer to 64
[ 1.157538] alloc irq_desc for 42 on cpu 0 node 0
[ 1.157540] alloc kstat_irqs on cpu 0 node 0
[ 1.157547] pcieport-driver 0000:40:0c.0: irq 42 for MSI/MSI-X
[ 1.157553] pcieport-driver 0000:40:0c.0: setting latency timer to 64
[ 1.157687] alloc irq_desc for 43 on cpu 0 node 0
[ 1.157689] alloc kstat_irqs on cpu 0 node 0
[ 1.157694] pcieport-driver 0000:40:0d.0: irq 43 for MSI/MSI-X
[ 1.157700] pcieport-driver 0000:40:0d.0: setting latency timer to 64
[ 1.157836] alloc irq_desc for 44 on cpu 0 node 0
[ 1.157838] alloc kstat_irqs on cpu 0 node 0
[ 1.157844] pcieport-driver 0000:40:0e.0: irq 44 for MSI/MSI-X
[ 1.157850] pcieport-driver 0000:40:0e.0: setting latency timer to 64
[ 1.162854] Linux agpgart interface v0.103
[ 1.162897] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.163076] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.163211] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.163688] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.166165] brd: module loaded
[ 1.166297] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.166618] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.168231] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.168279] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.168551] mice: PS/2 mouse device common for all mice
[ 1.168677] rtc_cmos 00:0a: RTC can wake from S4
[ 1.168801] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 1.168863] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.168956] cpuidle: using governor ladder
[ 1.168997] cpuidle: using governor menu
[ 1.169040] No iBFT detected.
[ 1.169443] TCP cubic registered
[ 1.169698] NET: Registered protocol family 10
[ 1.170418] lo: Disabled Privacy Extensions
[ 1.170752] Mobile IPv6
[ 1.170791] NET: Registered protocol family 17
[ 1.171032] registered taskstats version 1
[ 1.171366] rtc_cmos 00:0a: setting system clock to 2009-06-28 22:27:40 UTC (1246228060)
[ 1.171516] Freeing unused kernel memory: 560k freed
[ 1.171850] Write protecting the kernel read-only data: 3792k
[ 1.295791] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.296237] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 11
[ 1.296286] PCI: setting IRQ 11 as level-triggered
[ 1.296291] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 11 (level, low) -> IRQ 11
[ 1.296405] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 1.296407] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 1.296583] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 1.296680] ehci_hcd 0000:00:02.1: debug port 1
[ 1.296722] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 1.296732] ehci_hcd 0000:00:02.1: irq 11, io mem 0xd9cd0000
[ 1.302965] Uniform Multi-Platform E-IDE driver
[ 1.305305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.308122] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 1.308222] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.308272] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.308331] usb usb1: Product: EHCI Host Controller
[ 1.308373] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[ 1.308416] usb usb1: SerialNumber: 0000:00:02.1
[ 1.308534] usb usb1: configuration #1 chosen from 1 choice
[ 1.308606] hub 1-0:1.0: USB hub found
[ 1.308654] hub 1-0:1.0: 10 ports detected
[ 1.309133] amd74xx 0000:00:06.0: UDMA133 controller
[ 1.309177] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3)
[ 1.309236] amd74xx 0000:00:06.0: IDE port disabled
[ 1.309287] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 1.309337] ide0: BM-DMA at 0x0500-0x0507
[ 1.309381] Probing IDE interface ide0...
[ 1.323671] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (May 6, 2009)
[ 1.324027] ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 10
[ 1.324073] PCI: setting IRQ 10 as level-triggered
[ 1.324078] bnx2 0000:41:01.0: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10
[ 1.333785] SCSI subsystem initialized
[ 1.335882] HP CISS Driver (v 3.6.20)
[ 1.337112] ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 11
[ 1.337167] cciss 0000:42:02.0: PCI INT A -> Link[LNKY] -> GSI 11 (level, low) -> IRQ 11
[ 1.402244] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.402692] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 10
[ 1.402743] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
[ 1.402813] uhci_hcd 0000:01:04.4: UHCI Host Controller
[ 1.402951] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2
[ 1.403021] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[ 1.403076] uhci_hcd 0000:01:04.4: HCRESET not completed yet!
[ 1.403130] uhci_hcd 0000:01:04.4: irq 10, io base 0x00001800
[ 1.403222] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.403269] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.403330] usb usb2: Product: UHCI Host Controller
[ 1.403371] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 1.403415] usb usb2: SerialNumber: 0000:01:04.4
[ 1.403502] usb usb2: configuration #1 chosen from 1 choice
[ 1.403572] hub 2-0:1.0: USB hub found
[ 1.403618] hub 2-0:1.0: 2 ports detected
[ 1.420265] IRQ 11/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 1.420331] cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 11 using DAC
[ 1.421294] blocks= 286677120 block_size= 512
[ 1.421416] heads=255, sectors=32, cylinders=35132
[ 1.421417]
[ 1.421725] blocks= 286677120 block_size= 512
[ 1.421844] heads=255, sectors=32, cylinders=35132
[ 1.421845]
[ 1.421937] cciss/c0d0: p1 p2
[ 1.422442] blocks= 860051248 block_size= 512
[ 1.422561] heads=255, sectors=32, cylinders=105399
[ 1.422562]
[ 1.422806] blocks= 860051248 block_size= 512
[ 1.422922] heads=255, sectors=32, cylinders=105399
[ 1.422923]
[ 1.423012] cciss/c0d1: unknown partition table
[ 1.672013] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 1.804443] usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
[ 1.804502] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.804624] usb 1-6: configuration #1 chosen from 1 choice
[ 1.804834] hub 1-6:1.0: USB hub found
[ 1.804962] hub 1-6:1.0: 4 ports detected
[ 1.812282] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
[ 1.817093] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
[ 1.820889] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 10, node addr 00:1c:c4:f0:94:fa
[ 1.821061] bnx2 0000:41:02.0: PCI INT A -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
[ 1.920263] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 2.044094] hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
[ 2.067560] usb 2-1: New USB device found, idVendor=03f0, idProduct=1027
[ 2.067621] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.067667] usb 2-1: Product: Virtual Keyboard
[ 2.067708] usb 2-1: Manufacturer: HP
[ 2.067829] usb 2-1: configuration #1 chosen from 1 choice
[ 2.079417] usbcore: registered new interface driver hiddev
[ 2.084182] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.0/input/input1
[ 2.084307] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
[ 2.090657] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.1/input/input2
[ 2.090786] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[ 2.090875] usbcore: registered new interface driver usbhid
[ 2.090919] usbhid: v2.6:USB HID core driver
[ 2.188014] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 2.308017] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
[ 2.312895] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
[ 2.317152] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 10, node addr 00:1c:c4:f0:94:fc
[ 2.338637] usb 2-2: New USB device found, idVendor=03f0, idProduct=1327
[ 2.338695] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.338741] usb 2-2: Product: Virtual Hub
[ 2.338781] usb 2-2: Manufacturer: HP
[ 2.338902] usb 2-2: configuration #1 chosen from 1 choice
[ 2.344102] hub 2-2:1.0: USB hub found
[ 2.346329] hub 2-2:1.0: 7 ports detected
[ 2.384040] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 2.384822] hda: UDMA/33 mode selected
[ 2.385257] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.386392] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 5
[ 2.386436] PCI: setting IRQ 5 as level-triggered
[ 2.386440] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 5 (level, low) -> IRQ 5
[ 2.386575] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 2.386578] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 2.386704] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 2.386778] ohci_hcd 0000:00:02.0: irq 5, io mem 0xd9ce0000
[ 2.446034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.446080] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.446139] usb usb3: Product: OHCI Host Controller
[ 2.446181] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 2.446224] usb usb3: SerialNumber: 0000:00:02.0
[ 2.446314] usb usb3: configuration #1 chosen from 1 choice
[ 2.446384] hub 3-0:1.0: USB hub found
[ 2.446431] hub 3-0:1.0: 10 ports detected
[ 2.458769] libata version 3.00 loaded.
[ 2.465903] ide-cd driver 5.00
[ 2.468063] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 2.468257] Uniform CD-ROM driver Revision: 3.20
[ 2.594975] device-mapper: uevent: version 1.0.3
[ 2.595181] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.636308] kjournald starting. Commit interval 5 seconds
[ 2.636317] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.820017] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 3.037058] usb 3-3: New USB device found, idVendor=0624, idProduct=0341
[ 3.037117] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.037164] usb 3-3: Product: HP 336047-B21
[ 3.037204] usb 3-3: Manufacturer: Avocent
[ 3.037326] usb 3-3: configuration #1 chosen from 1 choice
[ 3.056287] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input3
[ 3.056409] generic-usb 0003:0624:0341.0003: input,hidraw2: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input0
[ 3.069382] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input4
[ 3.069497] generic-usb 0003:0624:0341.0004: input,hidraw3: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input1
[ 3.333460] udev: starting version 141
[ 3.405192] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.405263] ACPI: Power Button [PWRF]
[ 3.435325] processor ACPI_CPU:00: registered as cooling_device0
[ 3.435413] processor ACPI_CPU:01: registered as cooling_device1
[ 3.435493] processor ACPI_CPU:02: registered as cooling_device2
[ 3.435574] processor ACPI_CPU:03: registered as cooling_device3
[ 3.435657] processor ACPI_CPU:04: registered as cooling_device4
[ 3.435739] processor ACPI_CPU:05: registered as cooling_device5
[ 3.435820] processor ACPI_CPU:06: registered as cooling_device6
[ 3.435903] processor ACPI_CPU:07: registered as cooling_device7
[ 3.444361] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 3.464688] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.467816] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 3.468511] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[ 3.468657] k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
[ 3.468789] k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
[ 3.471812] shpchp 0000:40:10.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
[ 3.471882] shpchp 0000:40:10.0: Cannot reserve MMIO region
[ 3.475646] hpilo 0000:01:04.2: PCI INT B -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
[ 3.475951] shpchp 0000:40:11.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
[ 3.476022] shpchp 0000:40:11.0: Cannot reserve MMIO region
[ 3.476139] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.493696] ipmi message handler version 39.2
[ 3.524122] IPMI System Interface driver.
[ 3.524175] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 3.557512] Error: Driver 'pcspkr' is already registered, aborting...
[ 3.690171] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 3.690240] IPMI kcs interface initialized
[ 3.690294] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 3.690359] ipmi_si: duplicate interface
[ 3.724348] ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10
[ 3.724416] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, slave address 0x0, irq 10
[ 3.932019] IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
[ 3.932072] Using irq 10
[ 4.131150] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 4.131241] IPMI kcs interface initialized
[ 4.485741] EXT3 FS on cciss/c0d0p1, internal journal
[ 5.509026] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 5.509088] All bugs added by David S. Miller <davem@redhat.com>
[ 5.516696] ipmi device interface
[ 6.549485] kjournald starting. Commit interval 5 seconds
[ 6.549595] EXT3 FS on dm-1, internal journal
[ 6.549677] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.558196] kjournald starting. Commit interval 5 seconds
[ 6.558300] EXT3 FS on dm-2, internal journal
[ 6.558378] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.590480] kjournald starting. Commit interval 5 seconds
[ 6.590623] EXT3 FS on dm-4, internal journal
[ 6.590699] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.598331] kjournald starting. Commit interval 5 seconds
[ 6.598514] EXT3 FS on dm-0, internal journal
[ 6.598593] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.693332] Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k
[ 7.164426] NET: Registered protocol family 15
[ 7.178659] alg: No test for cipher_null (cipher_null-generic)
[ 7.178756] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 7.178844] alg: No test for digest_null (digest_null-generic)
[ 7.178932] alg: No test for compress_null (compress_null-generic)
[ 7.223356] Intel AES-NI instructions are not detected.
[ 7.619308] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
[ 7.619374] bonding: MII link monitoring set to 100 ms
[ 7.657178] ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 7.659749] bonding: bond0: Adding slave eth0.
[ 7.789496] bonding: bond0: enslaving eth0 as a backup interface with a down link.
[ 7.791929] bonding: bond0: Adding slave eth1.
[ 7.944004] bonding: bond0: enslaving eth1 as a backup interface with a down link.
[ 8.378827] Initializing XFRM netlink socket
[ 10.973236] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[ 11.053511] bonding: bond0: link status up for interface eth0, enabling it in 10000 ms.
[ 11.298418] bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
[ 11.353508] bonding: bond0: link status up for interface eth1, enabling it in 10000 ms.
[ 21.053509] bonding: bond0: link status definitely up for interface eth0.
[ 21.053558] bonding: bond0: making interface eth0 the new active one.
[ 21.053645] bonding: bond0: first active interface up!
[ 21.056555] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 21.353508] bonding: bond0: link status definitely up for interface eth1.
[ 31.305513] bond0: no IPv6 routers present
[ 32.438602] Fusion MPT base driver 3.04.07
[ 32.438647] Copyright (c) 1999-2008 LSI Corporation
[ 32.441740] Fusion MPT misc device (ioctl) driver 3.04.07
[ 32.441838] mptctl: Registered with Fusion MPT base driver
[ 32.441881] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 34.476948] lp: driver loaded but no devices found
[ 34.485496] ppdev: user-space parallel port driver
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-28 22:31 ` Stephen Frost
@ 2009-06-29 1:49 ` Yinghai Lu
2009-06-29 1:57 ` Stephen Frost
0 siblings, 1 reply; 26+ messages in thread
From: Yinghai Lu @ 2009-06-29 1:49 UTC (permalink / raw)
To: Stephen Frost; +Cc: linux-kernel
On Sun, Jun 28, 2009 at 3:31 PM, Stephen Frost<sfrost@snowman.net> wrote:
> Yinghai,
>
> * Yinghai Lu (yhlu.kernel@gmail.com) wrote:
>> try 2.6.30
>
> dmesg from 2.6.30 (w/ pci=noapic noapic) attached. Box didn't boot
> again, but we did get a "hung process" message from the kernel after a
> while. I don't have more info than that about the boot w/o pci=noapic
> noapic, sorry. I can try and get that info at another time if this
> isn't enough.
>
your BIOS doesn't assign resource for some devices
[ 0.688930] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.689183] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.696343] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.696525] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.696740] pci 0000:42:02.0: reg 30 32bit mmio: [0x000000-0x03ffff]
and acpi ioapic
ACPI: IOAPIC (id[0x08] address[0xf7cf0000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xf7cf0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xf7fd0000] gsi_base[24])
IOAPIC[1]: apic_id 9, address 0xf7fd0000, GSI 24-30
ACPI: IOAPIC (id[0x0a] address[0xf7fe0000] gsi_base[31])
IOAPIC[2]: apic_id 10, address 0xf7fe0000, GSI 31-37
ACPI: IOAPIC (id[0x0b] address[0xf7ff0000] gsi_base[38])
IOAPIC[3]: apic_id 11, address 0xf7ff0000, GSI 38-61
mptable report
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: HP
[ 0.000000] MPTABLE: Product ID: PROLIANT
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] I/O APIC #8 Version 32 at 0xD9CF0000.
[ 0.000000] I/O APIC #9 Version 32 at 0xD9FD0000.
[ 0.000000] I/O APIC #10 Version 32 at 0xD9FE0000.
are you sure these two come from same BIOS ?
YH
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-29 1:49 ` Yinghai Lu
@ 2009-06-29 1:57 ` Stephen Frost
2009-06-29 3:47 ` Yinghai Lu
0 siblings, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-06-29 1:57 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 539 bytes --]
* Yinghai Lu (yhlu.kernel@gmail.com) wrote:
> are you sure these two come from same BIOS ?
They might not.. I did upgrade the BIOS to the latest revision and I
don't recall if the last 2.6.22 boot was before or after the BIOS
upgrade. The 2.6.29 and 2.6.30 boots (both w/o APIC) are from the same
BIOS. Would it help to try booting under 2.6.22 with the BIOS that's on
there now?
Is there some other information I could provide while the machine is
running? Unfortunately, this is a rather important box for us.
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-29 1:57 ` Stephen Frost
@ 2009-06-29 3:47 ` Yinghai Lu
2009-06-29 13:23 ` Stephen Frost
0 siblings, 1 reply; 26+ messages in thread
From: Yinghai Lu @ 2009-06-29 3:47 UTC (permalink / raw)
To: Stephen Frost; +Cc: linux-kernel
On Sun, Jun 28, 2009 at 6:57 PM, Stephen Frost<sfrost@snowman.net> wrote:
> * Yinghai Lu (yhlu.kernel@gmail.com) wrote:
>> are you sure these two come from same BIOS ?
>
> They might not.. I did upgrade the BIOS to the latest revision and I
> don't recall if the last 2.6.22 boot was before or after the BIOS
> upgrade. The 2.6.29 and 2.6.30 boots (both w/o APIC) are from the same
> BIOS. Would it help to try booting under 2.6.22 with the BIOS that's on
> there now?
that would help
>
> Is there some other information I could provide while the machine is
> running? Unfortunately, this is a rather important box for us.
put debug in /boot/grub/grub.conf for the kernel
and boot with serial console enabled...
to capture all.
YH
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-29 3:47 ` Yinghai Lu
@ 2009-06-29 13:23 ` Stephen Frost
0 siblings, 0 replies; 26+ messages in thread
From: Stephen Frost @ 2009-06-29 13:23 UTC (permalink / raw)
To: Yinghai Lu; +Cc: linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 793 bytes --]
Yinghai,
* Yinghai Lu (yhlu.kernel@gmail.com) wrote:
> On Sun, Jun 28, 2009 at 6:57 PM, Stephen Frost<sfrost@snowman.net> wrote:
> > They might not.. I did upgrade the BIOS to the latest revision and I
> > don't recall if the last 2.6.22 boot was before or after the BIOS
> > upgrade. The 2.6.29 and 2.6.30 boots (both w/o APIC) are from the same
> > BIOS. Would it help to try booting under 2.6.22 with the BIOS that's on
> > there now?
>
> that would help
attached.
> >
> > Is there some other information I could provide while the machine is
> > running? Unfortunately, this is a rather important box for us.
>
> put debug in /boot/grub/grub.conf for the kernel
> and boot with serial console enabled...
> to capture all.
attached.
Thanks,
Stephen
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.2: dmesg-2.6.22-apic --]
[-- Type: text/plain; charset=utf-8, Size: 29704 bytes --]
Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007
Command line: root=/dev/cciss/c0d0p1 ro debug
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)
BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)
BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)
BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 523854) 1 entries of 3200 used
Entering add_active_range(0, 523862, 523863) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 4718591) 3 entries of 3200 used
end_pfn_map = 4718591
DMI 2.4 present.
ACPI: RSDP 000F4F00, 0024 (r2 HP )
ACPI: XSDT 7FE4ED00, 0074 (r1 HP ProLiant 2 Ò\x04 162E)
ACPI: FACP 7FE4ED80, 00F4 (r3 HP A07 2 Ò\x04 162E)
ACPI: DSDT 7FE4EE80, 498A (r1 HP DSDT 1 INTL 20030228)
ACPI: FACS 7FE4E100, 0040
ACPI: SPCR 7FE4E140, 0050 (r1 HP SPCRRBSU 1 Ò\x04 162E)
ACPI: HPET 7FE4E1C0, 0038 (r1 HP ProLiant 2 Ò\x04 162E)
ACPI: SPMI 7FE4E200, 0040 (r5 HP ProLiant 1 Ò\x04 162E)
ACPI: ERST 7FE4E240, 01D0 (r1 HP ProLiant 1 Ò\x04 162E)
ACPI: APIC 7FE4E440, 00C6 (r1 HP ProLiant 2 0)
ACPI: SRAT 7FE4E580, 01A0 (r1 AMD FAM_F_10 2 AMD 1)
ACPI: FFFF 7FE4E980, 0176 (r1 HP ProLiant 1 Ò\x04 162E)
ACPI: BERT 7FE4EB00, 0030 (r1 HP ProLiant 1 Ò\x04 162E)
ACPI: HEST 7FE4EB40, 0170 (r1 HP ProLiant 1 Ò\x04 162E)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: PXM 2 -> APIC 4 -> Node 2
SRAT: PXM 2 -> APIC 5 -> Node 2
SRAT: PXM 3 -> APIC 6 -> Node 3
SRAT: PXM 3 -> APIC 7 -> Node 3
SRAT: Node 0 PXM 0 0-a0000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
SRAT: Node 0 PXM 0 0-80000000
Entering add_active_range(0, 0, 159) 1 entries of 3200 used
Entering add_active_range(0, 256, 523854) 1 entries of 3200 used
Entering add_active_range(0, 523862, 523863) 2 entries of 3200 used
SRAT: Node 0 PXM 0 0-180000000
Entering add_active_range(0, 0, 159) 3 entries of 3200 used
Entering add_active_range(0, 256, 523854) 3 entries of 3200 used
Entering add_active_range(0, 523862, 523863) 3 entries of 3200 used
Entering add_active_range(0, 1048576, 1572864) 3 entries of 3200 used
SRAT: Node 1 PXM 1 180000000-280000000
Entering add_active_range(1, 1572864, 2621440) 4 entries of 3200 used
SRAT: Node 2 PXM 2 280000000-380000000
Entering add_active_range(2, 2621440, 3670016) 5 entries of 3200 used
SRAT: Node 3 PXM 3 380000000-480000000
Entering add_active_range(3, 3670016, 4718591) 6 entries of 3200 used
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000180000000
Bootmem setup node 1 0000000180000000-0000000280000000
Bootmem setup node 2 0000000280000000-0000000380000000
Bootmem setup node 3 0000000380000000-000000047ffff000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 4718591
early_node_map[7] active PFN ranges
0: 0 -> 159
0: 256 -> 523854
0: 523862 -> 523863
0: 1048576 -> 1572864
1: 1572864 -> 2621440
2: 2621440 -> 3670016
3: 3670016 -> 4718591
On node 0 totalpages: 1048046
DMA zone: 56 pages used for memmap
DMA zone: 1034 pages reserved
DMA zone: 2909 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 505479 pages, LIFO batch:31
Normal zone: 7168 pages used for memmap
Normal zone: 517120 pages, LIFO batch:31
On node 1 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
On node 2 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
On node 3 totalpages: 1048575
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14335 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
Processor #2
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
Processor #4
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
Processor #6
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
Processor #3
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
Processor #5
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0])
IOAPIC[0]: apic_id 8, address 0xd9cf0000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24])
IOAPIC[1]: apic_id 9, address 0xd9fd0000, GSI 24-30
ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31])
IOAPIC[2]: apic_id 10, address 0xd9fe0000, GSI 31-37
ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38])
IOAPIC[3]: apic_id 11, address 0xd9ff0000, GSI 38-61
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
ACPI: NMI_SRC (dfl dfl global_irq 28)
ACPI: NMI_SRC (dfl dfl global_irq 35)
Setting APIC routing to flat
ACPI: HPET id: 0x10228201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
swsusp: Registered nosave memory region: 000000007fe4e000 - 000000007fe56000
swsusp: Registered nosave memory region: 000000007fe57000 - 0000000080000000
swsusp: Registered nosave memory region: 0000000080000000 - 00000000e0000000
swsusp: Registered nosave memory region: 00000000e0000000 - 00000000f0000000
swsusp: Registered nosave memory region: 00000000f0000000 - 00000000fec00000
swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000
swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000
swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000
swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000
swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
PERCPU: Allocating 37896 bytes of per cpu data
Built 4 zonelists. Total pages: 4128228
Kernel command line: root=/dev/cciss/c0d0p1 ro debug
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2812.969 MHz processor.
Console: colour VGA+ 80x25
Checking aperture...
CPU 0: aperture @ 20000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 16438936k/18874364k available (2008k kernel code, 336156k reserved, 945k data, 296k init)
Calibrating delay using timer specific routine.. 5629.02 BogoMIPS (lpj=11258051)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12557905
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/8 APIC 0x2
Initializing CPU#1
Calibrating delay using timer specific routine.. 5625.95 BogoMIPS (lpj=11251916)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/2 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 2/8 APIC 0x4
Initializing CPU#2
Calibrating delay using timer specific routine.. 5626.12 BogoMIPS (lpj=11252243)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 2/4 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 3/8 APIC 0x6
Initializing CPU#3
Calibrating delay using timer specific routine.. 5626.08 BogoMIPS (lpj=11252169)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 3/6 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 0
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 4/8 APIC 0x1
Initializing CPU#4
Calibrating delay using timer specific routine.. 5626.05 BogoMIPS (lpj=11252119)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 4/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 5/8 APIC 0x3
Initializing CPU#5
Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=11251922)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 5/3 -> Node 1
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 6/8 APIC 0x5
Initializing CPU#6
Calibrating delay using timer specific routine.. 5625.94 BogoMIPS (lpj=11251896)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 6/5 -> Node 2
CPU: Physical Processor ID: 2
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
SMP alternatives: switching to SMP code
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 5625.97 BogoMIPS (lpj=11251944)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 7/7 -> Node 3
CPU: Physical Processor ID: 3
CPU: Processor Core ID: 1
Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
Brought up 8 CPUs
migration_cost=461,611
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:40)
PCI: Probing PCI hardware (bus 40)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *11
ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid IPI0001
pnp: ACPI device : hid PNP0103
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0303
pnp: ACPI device : hid PNP0F13
pnp: ACPI device : hid PNP0A06
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0003
pnp: ACPI device : hid PNP0003
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Time: hpet clocksource has been installed.
ACPI: RTC can wake from S4
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:01' and the driver 'system'
pnp: 00:01: ioport range 0x408-0x40f has been reserved
pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:01: ioport range 0x700-0x73f has been reserved
PCI: Bridge: 0000:00:09.0
IO window: 1000-2fff
MEM window: d9d00000-d9efffff
PREFETCH window: d0000000-d7ffffff
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:40:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:40:10.0
IO window: disabled.
MEM window: da000000-ddffffff
PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:40:11.0
IO window: 3000-3fff
MEM window: dfe00000-dfefffff
PREFETCH window: 88100000-881fffff
PCI: Setting latency timer of device 0000:40:0b.0 to 64
PCI: Setting latency timer of device 0000:40:0c.0 to 64
PCI: Setting latency timer of device 0000:40:0d.0 to 64
PCI: Setting latency timer of device 0000:40:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 2097152 (order: 13, 50331648 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 2097152 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 7574k freed
audit: initializing netlink socket (disabled)
audit(1246277507.840:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found enabled HT MSI Mapping on 0000:00:0c.0
PCI: Found enabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:0e.0
Boot video device is 0000:01:03.0
pci 0000:01:04.4: HCRESET not completed yet!
PCI: Found enabled HT MSI Mapping on 0000:40:0b.0
PCI: Found enabled HT MSI Mapping on 0000:40:0c.0
PCI: Found enabled HT MSI Mapping on 0000:40:0d.0
PCI: Found enabled HT MSI Mapping on 0000:40:0e.0
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:40:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0b.0:pcie00]
PCI: Setting latency timer of device 0000:40:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0c.0:pcie00]
PCI: Setting latency timer of device 0000:40:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0d.0:pcie00]
PCI: Setting latency timer of device 0000:40:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:40:0e.0:pcie00]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:09' and the driver 'serial'
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd'
pnp: the driver 'i8042 aux' has been registered
pnp: match found with the PnP device '00:07' and the driver 'i8042 aux'
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 296k freed
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
SCSI subsystem initialized
HP CISS Driver (v 3.6.14)
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 163
ACPI: PCI Interrupt 0000:42:02.0[A] -> GSI 26 (level, low) -> IRQ 26
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007)
ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 31
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a3) UDMA133 controller
ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 31, node addr 001cc4f094fa
ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 32
eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 32, node addr 001cc4f094fc
cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
blocks= 860051248 block_size= 512
heads=255, sectors=32, cylinders=105399
blocks= 286677120 block_size= 512
heads=255, sectors=32, cylinders=35132
cciss/c0d0: p1 p2
blocks= 860051248 block_size= 512
heads=255, sectors=32, cylinders=105399
cciss/c0d1: unknown partition table
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb 1-6: configuration #1 chosen from 1 choice
hub 1-6:1.0: USB hub found
hub 1-6:1.0: 4 ports detected
hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
libata version 2.21 loaded.
hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000
USB Universal Host Controller Interface driver v3.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17
uhci_hcd 0000:01:04.4: UHCI Host Controller
uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:04.4: HCRESET not completed yet!
uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 2-3: new low speed USB device using ohci_hcd and address 2
usb 2-3: configuration #1 chosen from 1 choice
udev: starting version 141
udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
usb 3-1: new full speed USB device using uhci_hcd and address 2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
shpchp: shpc_init: cannot reserve MMIO region
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pnp: the driver 'rtc_cmos' has been registered
pnp: match found with the PnP device '00:0a' and the driver 'rtc_cmos'
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
pnp: Device 00:0a does not support disabling.
rtc_cmos: probe of 00:0a failed with error -16
usb 3-1: configuration #1 chosen from 1 choice
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 7 ports detected
usbcore: registered new interface driver hiddev
input: Avocent HP 336047-B21 as /class/input/input0
input: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3
input: Avocent HP 336047-B21 as /class/input/input1
input: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3
input: HP Virtual Keyboard as /class/input/input2
input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
input: HP Virtual Keyboard as /class/input/input3
input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
EXT3 FS on cciss/c0d0p1, internal journal
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ipmi message handler version 39.1
ipmi device interface
IPMI System Interface driver.
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: duplicate interface
ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16
ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, slave address 0x0, irq 16
Using irq 16
ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
IPMI kcs interface initialized
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k
NET: Registered protocol family 15
Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
bonding: MII link monitoring set to 100 ms
bonding: bond0: Adding slave eth0.
bonding: bond0: enslaving eth0 as a backup interface with a down link.
bonding: bond0: Adding slave eth1.
bonding: bond0: enslaving eth1 as a backup interface with a down link.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_UP): bond0: link is not ready
Initializing XFRM netlink socket
bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
bonding: bond0: link status up for interface eth0, enabling it in 10000 ms.
bnx2: eth1 NIC Link is Up, 1000 Mbps full duplex
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
bonding: bond0: link status up for interface eth1, enabling it in 10000 ms.
bonding: bond0: link status definitely up for interface eth0.
bonding: bond0: making interface eth0 the new active one.
bonding: bond0: first active interface up!
ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bonding: bond0: link status definitely up for interface eth1.
eth1: no IPv6 routers present
eth0: no IPv6 routers present
bond0: no IPv6 routers present
Fusion MPT base driver 3.04.04
Copyright (c) 1999-2007 LSI Logic Corporation
Fusion MPT misc device (ioctl) driver 3.04.04
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.3: boot-with-debug-2.6.30 --]
[-- Type: text/plain; charset=utf-8, Size: 53835 bytes --]
Probing EDD (edd=off to disable)... ok
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009
[ 0.000000] Command line: root=/dev/cciss/c0d0p1 ro debug console=ttyS1,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)
[ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)
[ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000480000000 aka 18432M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fe57000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000
[ 0.000000] 0100000000 - 047fe00000 page 2M
[ 0.000000] 047fe00000 - 047ffff000 page 4k
[ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000
[ 0.000000] RAMDISK: 3772d000 - 37fef723
[ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000007fe4ed00 00074 (v01 HP ProLiant 00000002 Ò\x04 0000162E)
[ 0.000000] ACPI: FACP 000000007fe4ed80 000F4 (v03 HP A07 00000002 Ò\x04 0000162E)
[ 0.000000] ACPI: DSDT 000000007fe4ee80 0498A (v01 HP DSDT 00000001 INTL 20030228)
[ 0.000000] ACPI: FACS 000000007fe4e100 00040
[ 0.000000] ACPI: SPCR 000000007fe4e140 00050 (v01 HP SPCRRBSU 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: HPET 000000007fe4e1c0 00038 (v01 HP ProLiant 00000002 Ò\x04 0000162E)
[ 0.000000] ACPI: SPMI 000000007fe4e200 00040 (v05 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: ERST 000000007fe4e240 001D0 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: APIC 000000007fe4e440 000C6 (v01 HP ProLiant 00000002 00000000)
[ 0.000000] ACPI: SRAT 000000007fe4e580 001A0 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: FFFF 000000007fe4e980 00176 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: BERT 000000007fe4eb00 00030 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: HEST 000000007fe4eb40 00170 (v01 HP ProLiant 00000001 Ò\x04 0000162E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000
[ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000
[ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000
[ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000
[ 0.000000] NUMA: Allocated memnodemap from 19000 - 22040
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000
[ 0.000000] NODE_DATA [0000000000022040 - 000000000002a03f]
[ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0180000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc]
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK ==> [003772d000 - 0037fef723]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [00007da000 - 00007da114] BRK ==> [00007da000 - 00007da114]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE ==> [000000a000 - 0000019000]
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP ==> [0000019000 - 0000022040]
[ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000
[ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff]
[ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0180000000 - 0280000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000
[ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff]
[ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0280000000 - 0380000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000
[ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff]
[ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0380000000 - 047ffff000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [003772d000 - 0037fef723] RAMDISK
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80
[ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
[ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
[ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff880280200000-ffff8802839fffff] on node 2
[ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff880380200000-ffff8803839fffff] on node 3
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0047ffff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe4e
[ 0.000000] 0: 0x0007fe56 -> 0x0007fe57
[ 0.000000] 0: 0x00100000 -> 0x00180000
[ 0.000000] 1: 0x00180000 -> 0x00280000
[ 0.000000] 2: 0x00280000 -> 0x00380000
[ 0.000000] 3: 0x00380000 -> 0x0047ffff
[ 0.000000] On node 0 totalpages: 1048046
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1622 pages reserved
[ 0.000000] DMA zone: 2321 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 517120 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034239 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xd9cf0000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xd9fd0000, GSI 24-30
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31])
[ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xd9fe0000, GSI 31-37
[ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38])
[ 0.000000] IOAPIC[3]: apic_id 11, version 0, address 0xd9ff0000, GSI 38-61
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 28)
[ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 35)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 62
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe56000
[ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Allocated 19 4k pages, static data 76256 bytes
[ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 4127639
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/cciss/c0d0p1 ro debug console=ttyS1,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:1118
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2813.220 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [ttyS1] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 20000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 16463796k/18874364k available (2782k kernel code, 2099272k absent, 311296k reserved, 1398k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.44 BogoMIPS (lpj=11252880)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.005448] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.019021] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.025049] Mount-cache hash table entries: 256
[ 0.025428] Initializing cgroup subsys ns
[ 0.025944] Initializing cgroup subsys cpuacct
[ 0.026946] Initializing cgroup subsys devices
[ 0.027938] Initializing cgroup subsys freezer
[ 0.028004] Initializing cgroup subsys net_cls
[ 0.029064] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.030050] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.031000] CPU 0/0x0 -> Node 0
[ 0.032002] tseg: 0000000000
[ 0.032994] CPU: Physical Processor ID: 0
[ 0.034006] CPU: Processor Core ID: 0
[ 0.035034] using C1E aware idle routine
[ 0.036583] ACPI: Core revision 20090320
[ 0.046374] Setting APIC routing to flat
[ 0.048421] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.092558] CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.104001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5625.98 BogoMIPS (lpj=11251976)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 1/0x2 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.196646] CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.204110] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5626.00 BogoMIPS (lpj=11252017)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 2/0x4 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.300611] CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.316183] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5625.99 BogoMIPS (lpj=11251993)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 3/0x6 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.408736] CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.416687] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#4
[ 0.004000] Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=11251933)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 4/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.512533] CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.528175] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#5
[ 0.004000] Calibrating delay using timer specific routine.. 5626.00 BogoMIPS (lpj=11252000)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 5/0x3 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.620606] CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.628739] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.004000] Initializing CPU#6
[ 0.004000] Calibrating delay using timer specific routine.. 5626.01 BogoMIPS (lpj=11252033)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 6/0x5 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.724628] CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.736213] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.004000] Initializing CPU#7
[ 0.004000] Calibrating delay using timer specific routine.. 5625.96 BogoMIPS (lpj=11251925)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 7/0x7 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.832703] CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
[ 0.840009] Brought up 8 CPUs
[ 0.841323] Total of 8 processors activated (45008.37 BogoMIPS).
[ 0.844152] CPU0 attaching sched-domain:
[ 0.848005] domain 0: span 0,4 level CPU
[ 0.849811] groups: 0 4
[ 0.854015] domain 1: span 0-7 level NODE
[ 0.856840] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[ 0.876005] CPU1 attaching sched-domain:
[ 0.880008] domain 0: span 1,5 level CPU
[ 0.888003] groups: 1 5
[ 0.889280] domain 1: span 0-7 level NODE
[ 0.891170] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[ 0.904902] CPU2 attaching sched-domain:
[ 0.908005] domain 0: span 2,6 level CPU
[ 0.912003] groups: 2 6
[ 0.920004] domain 1: span 0-7 level NODE
[ 0.924837] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[ 0.952004] CPU3 attaching sched-domain:
[ 0.956004] domain 0: span 3,7 level CPU
[ 0.962700] groups: 3 7
[ 0.964255] domain 1: span 0-7 level NODE
[ 0.968003] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[ 0.982117] CPU4 attaching sched-domain:
[ 0.984004] domain 0: span 0,4 level CPU
[ 0.992003] groups: 4 0
[ 1.000004] domain 1: span 0-7 level NODE
[ 1.004835] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[ 1.015035] CPU5 attaching sched-domain:
[ 1.016004] domain 0: span 1,5 level CPU
[ 1.024003] groups: 5 1
[ 1.032004] domain 1: span 0-7 level NODE
[ 1.036842] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[ 1.060108] CPU6 attaching sched-domain:
[ 1.062024] domain 0: span 2,6 level CPU
[ 1.064773] groups: 6 2
[ 1.066034] domain 1: span 0-7 level NODE
[ 1.067910] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[ 1.077805] CPU7 attaching sched-domain:
[ 1.080004] domain 0: span 3,7 level CPU
[ 1.082771] groups: 7 3
[ 1.088004] domain 1: span 0-7 level NODE
[ 1.092839] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[ 1.109100] net_namespace: 1936 bytes
[ 1.112064] Booting paravirtualized kernel on bare hardware
[ 1.116123] regulator: core version 0.5
[ 1.120164] NET: Registered protocol family 16
[ 1.124041] node 0 link 1: io port [1000, 2fff]
[ 1.128005] node 1 link 2: io port [3000, ffff]
[ 1.132004] TOM: 0000000080000000 aka 2048M
[ 1.136004] node 0 link 1: mmio [d0000000, d9efffff]
[ 1.140079] node 1 link 2: mmio [d9f00000, dfefffff]
[ 1.145009] node 0 link 1: mmio [e0000000, e3ffffff]
[ 1.148105] node 1 link 2: mmio [e4000000, e7ffffff]
[ 1.152109] node 0 link 1: mmio [a0000, bffff]
[ 1.155937] TOM2: 0000000480000000 aka 18432M
[ 1.156005] bus: [00,3f] on node 0 link 1
[ 1.160004] bus: 00 index 0 io port: [0, 2fff]
[ 1.164004] bus: 00 index 1 mmio: [80000000, d9efffff]
[ 1.168004] bus: 00 index 2 mmio: [dff00000, e3ffffff]
[ 1.172004] bus: 00 index 3 mmio: [a0000, bffff]
[ 1.176004] bus: 00 index 4 mmio: [e8000000, ffffffff]
[ 1.180004] bus: 00 index 5 mmio: [480000000, fcffffffff]
[ 1.184004] bus: [40,7f] on node 1 link 2
[ 1.188004] bus: 40 index 0 io port: [3000, ffff]
[ 1.192004] bus: 40 index 1 mmio: [d9f00000, dfefffff]
[ 1.196004] bus: 40 index 2 mmio: [e4000000, e7ffffff]
[ 1.200013] ACPI: bus type pci registered
[ 1.204039] PCI: Using configuration type 1 for base access
[ 1.208010] PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort.
[ 1.212268] bio: create slab <bio-0> at 0
[ 1.216390] ACPI: EC: Look up EC in DSDT
[ 1.227390] ACPI: SSDT 000000007fe58000 00AC4 (v02 HP PNOWSSDT 00000002 HP 00000001)
[ 1.232517] ACPI: Interpreter enabled
[ 1.236005] ACPI: (supports S0 S4 S5)
[ 1.240379] ACPI: Using IOAPIC for interrupt routing
[ 1.248824] ACPI: No dock devices found.
[ 1.252018] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.256091] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff]
[ 1.260016] pci 0000:00:02.0: supports D1 D2
[ 1.264004] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.268005] pci 0000:00:02.0: PME# disabled
[ 1.269905] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff]
[ 1.272018] pci 0000:00:02.1: supports D1 D2
[ 1.276006] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.280005] pci 0000:00:02.1: PME# disabled
[ 1.284027] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f]
[ 1.288042] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.292010] pci 0000:00:0c.0: PME# disabled
[ 1.296025] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.300004] pci 0000:00:0d.0: PME# disabled
[ 1.304023] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.308005] pci 0000:00:0e.0: PME# disabled
[ 1.312245] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 1.316007] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
[ 1.320007] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff]
[ 1.324016] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.328017] pci 0000:01:03.0: supports D1 D2
[ 1.332026] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
[ 1.336007] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff]
[ 1.340027] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 1.344005] pci 0000:01:04.0: PME# disabled
[ 1.348031] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
[ 1.352008] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff]
[ 1.356008] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff]
[ 1.360008] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff]
[ 1.364014] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 1.368016] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[ 1.372006] pci 0000:01:04.2: PME# disabled
[ 1.376041] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
[ 1.380023] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
[ 1.384006] pci 0000:01:04.4: PME# disabled
[ 1.388026] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff]
[ 1.392032] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
[ 1.396006] pci 0000:01:04.6: PME# disabled
[ 1.400029] pci 0000:00:09.0: transparent bridge
[ 1.404005] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
[ 1.408005] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff]
[ 1.412005] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 1.416106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.420084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 1.424111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
[ 1.428106] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
[ 1.432103] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
[ 1.440145] ACPI: PCI Root Bridge [PCI1] (0000:40)
[ 1.444130] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.448006] pci 0000:40:0b.0: PME# disabled
[ 1.452035] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.456005] pci 0000:40:0c.0: PME# disabled
[ 1.460034] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.464006] pci 0000:40:0d.0: PME# disabled
[ 1.465912] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.468005] pci 0000:40:0e.0: PME# disabled
[ 1.470000] pci 0000:40:10.0: Enabling HT MSI Mapping
[ 1.472067] pci 0000:40:11.0: Enabling HT MSI Mapping
[ 1.476209] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.480016] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.484016] pci 0000:41:01.0: PME# supported from D3hot D3cold
[ 1.488005] pci 0000:41:01.0: PME# disabled
[ 1.489914] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.492015] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.496016] pci 0000:41:02.0: PME# supported from D3hot D3cold
[ 1.500005] pci 0000:41:02.0: PME# disabled
[ 1.504027] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.508035] pci 0000:42:02.0: reg 10 64bit mmio: [0xdfef0000-0xdfef1fff]
[ 1.512007] pci 0000:42:02.0: reg 18 io port: [0x3000-0x30ff]
[ 1.516009] pci 0000:42:02.0: reg 1c 64bit mmio: [0xdfe80000-0xdfebffff]
[ 1.520009] pci 0000:42:02.0: reg 30 32bit mmio: [0x000000-0x03ffff]
[ 1.524015] pci 0000:42:02.0: supports D1
[ 1.528027] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff]
[ 1.532006] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 1.536022] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
[ 1.540070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
[ 1.544161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
[ 1.548116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
[ 1.552112] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
[ 1.556111] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
[ 1.560238] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
[ 1.566832] ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
[ 1.570622] ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
[ 1.575267] ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
[ 1.578851] ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
[ 1.582271] ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *11
[ 1.584571] ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
[ 1.592869] ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
[ 1.600881] ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
[ 1.608885] ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
[ 1.616736] usbcore: registered new interface driver usbfs
[ 1.620026] usbcore: registered new interface driver hub
[ 1.624022] usbcore: registered new device driver usb
[ 1.628024] PCI: Using ACPI for IRQ routing
[ 1.632125] Expanded resource reserved due to conflict with PCI Bus #00
[ 1.636005] Expanded resource reserved due to conflict with PCI Bus #00
[ 1.652117] PCI-DMA: Disabling AGP.
[ 1.656125] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.660006] PCI-DMA: using GART IOMMU.
[ 1.664007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.668708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.678342] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.700014] Switched to high resolution mode on CPU 0
[ 1.700509] Switched to high resolution mode on CPU 4
[ 1.700590] Switched to high resolution mode on CPU 2
[ 1.700595] Switched to high resolution mode on CPU 6
[ 1.700614] Switched to high resolution mode on CPU 1
[ 1.700622] Switched to high resolution mode on CPU 5
[ 1.700728] Switched to high resolution mode on CPU 3
[ 1.700734] Switched to high resolution mode on CPU 7
[ 1.940009] pnp: PnP ACPI init
[ 1.957524] ACPI: bus type pnp registered
[ 1.967669] pnp: PnP ACPI: found 16 devices
[ 1.990145] ACPI: ACPI bus type pnp unregistered
[ 2.017455] system 00:01: ioport range 0x408-0x40f has been reserved
[ 2.046150] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 2.083139] system 00:01: ioport range 0x700-0x73f has been reserved
[ 2.086009] system 00:01: ioport range 0x800-0x8fe has been reserved
[ 2.110157] system 00:01: ioport range 0x900-0x9fe has been reserved
[ 2.124136] system 00:01: ioport range 0x9ff-0x9ff has been reserved
[ 2.149160] system 00:01: ioport range 0xa00-0xafe has been reserved
[ 2.186185] system 00:01: ioport range 0xaff-0xaff has been reserved
[ 2.212150] system 00:01: ioport range 0xb00-0xbfe has been reserved
[ 2.249156] system 00:01: ioport range 0xbff-0xbff has been reserved
[ 2.275152] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 2.311161] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 2.347167] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
[ 2.375057] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 2.411166] system 00:01: ioport range 0xca0-0xca1 has been reserved
[ 2.425452] system 00:01: ioport range 0xca4-0xca5 has been reserved
[ 2.443744] system 00:01: ioport range 0xc00-0xc03 has been reserved
[ 2.464192] system 00:01: ioport range 0x2f8-0x2ff has been reserved
[ 2.506582] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 2.539152] pci 0000:00:09.0: IO window: 0x1000-0x2fff
[ 2.570472] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff
[ 2.574146] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 2.618165] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08
[ 2.641147] pci 0000:00:0c.0: IO window: disabled
[ 2.669373] pci 0000:00:0c.0: MEM window: disabled
[ 2.698239] pci 0000:00:0c.0: PREFETCH window: disabled
[ 2.700685] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[ 2.729181] pci 0000:00:0d.0: IO window: disabled
[ 2.757167] pci 0000:00:0d.0: MEM window: disabled
[ 2.786181] pci 0000:00:0d.0: PREFETCH window: disabled
[ 2.788628] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 2.791277] pci 0000:00:0e.0: IO window: disabled
[ 2.809490] pci 0000:00:0e.0: MEM window: disabled
[ 2.838163] pci 0000:00:0e.0: PREFETCH window: disabled
[ 2.840610] pci 0000:00:09.0: setting latency timer to 64
[ 2.843016] pci 0000:00:0c.0: setting latency timer to 64
[ 2.873151] pci 0000:00:0d.0: setting latency timer to 64
[ 2.881135] pci 0000:00:0e.0: setting latency timer to 64
[ 2.912200] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f
[ 2.946172] pci 0000:40:0b.0: IO window: disabled
[ 2.963206] pci 0000:40:0b.0: MEM window: disabled
[ 2.981201] pci 0000:40:0b.0: PREFETCH window: disabled
[ 2.983638] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c
[ 3.012182] pci 0000:40:0c.0: IO window: disabled
[ 3.039516] pci 0000:40:0c.0: MEM window: disabled
[ 3.047943] pci 0000:40:0c.0: PREFETCH window: disabled
[ 3.077157] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49
[ 3.079815] pci 0000:40:0d.0: IO window: disabled
[ 3.104195] pci 0000:40:0d.0: MEM window: disabled
[ 3.130465] pci 0000:40:0d.0: PREFETCH window: disabled
[ 3.153179] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46
[ 3.187165] pci 0000:40:0e.0: IO window: disabled
[ 3.215256] pci 0000:40:0e.0: MEM window: disabled
[ 3.244170] pci 0000:40:0e.0: PREFETCH window: disabled
[ 3.274221] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41
[ 3.308178] pci 0000:40:10.0: IO window: disabled
[ 3.336189] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff
[ 3.371211] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x000000d9ffffff
[ 3.415171] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42
[ 3.418746] pci 0000:40:11.0: IO window: 0x3000-0x3fff
[ 3.421189] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff
[ 3.445169] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x000000de0fffff
[ 3.468981] pci 0000:40:0b.0: setting latency timer to 64
[ 3.498222] pci 0000:40:0c.0: setting latency timer to 64
[ 3.500669] pci 0000:40:0d.0: setting latency timer to 64
[ 3.526170] pci 0000:40:0e.0: setting latency timer to 64
[ 3.546183] pci_bus 0000:00: resource 0 io: [0x00-0x2fff]
[ 3.566494] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff]
[ 3.603196] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff]
[ 3.628197] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
[ 3.651265] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff]
[ 3.670843] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff]
[ 3.673813] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]
[ 3.676354] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff]
[ 3.703416] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 3.742370] pci_bus 0000:01: resource 3 io: [0x00-0x2fff]
[ 3.753214] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff]
[ 3.779205] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff]
[ 3.815204] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
[ 3.827199] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff]
[ 3.853497] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff]
[ 3.884189] pci_bus 0000:40: resource 0 io: [0x3000-0xffff]
[ 3.905203] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff]
[ 3.913677] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff]
[ 3.934225] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff]
[ 3.971546] pci_bus 0000:41: resource 2 pref mem [0xd9f00000-0xd9ffffff]
[ 3.974579] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff]
[ 4.000243] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 4.037538] pci_bus 0000:42: resource 2 pref mem [0xde000000-0xde0fffff]
[ 4.040775] NET: Registered protocol family 2
[ 4.116540] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 4.162713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 4.200152] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 4.239278] TCP: Hash tables configured (established 524288 bind 65536)
[ 4.276228] TCP reno registered
[ 4.312283] NET: Registered protocol family 1
[ 4.336325] Trying to unpack rootfs image as initramfs...
[ 4.624886] Freeing initrd memory: 8969k freed
[ 4.657805] audit: initializing netlink socket (disabled)
[ 4.687272] type=2000 audit(1246278158.687:1): initialized
[ 4.720954] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.756685] VFS: Disk quotas dquot_6.5.2
[ 4.778321] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.814913] msgmni has been set to 32173
[ 4.837641] alg: No test for stdrng (krng)
[ 4.860377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.892210] io scheduler noop registered
[ 4.893971] io scheduler anticipatory registered
[ 4.896038] io scheduler deadline registered
[ 4.919312] io scheduler cfq registered (default)
[ 4.976024] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 5.007663] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 5.021253] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 5.027515] pci 0000:01:03.0: Boot video device
[ 5.052257] pci 0000:01:04.4: HCRESET not completed yet!
[ 5.083283] pci 0000:40:0b.0: Found enabled HT MSI Mapping
[ 5.114281] pci 0000:40:0c.0: Found enabled HT MSI Mapping
[ 5.145240] pci 0000:40:0d.0: Found enabled HT MSI Mapping
[ 5.165247] pci 0000:40:0e.0: Found enabled HT MSI Mapping
[ 5.197482] alloc irq_desc for 62 on cpu 0 node 0
[ 5.201454] alloc kstat_irqs on cpu 0 node 0
[ 5.228248] pcieport-driver 0000:00:0c.0: irq 62 for MSI/MSI-X
[ 5.251251] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 5.287406] alloc irq_desc for 63 on cpu 0 node 0
[ 5.291383] alloc kstat_irqs on cpu 0 node 0
[ 5.341232] pcieport-driver 0000:00:0d.0: irq 63 for MSI/MSI-X
[ 5.352289] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 5.367374] alloc irq_desc for 64 on cpu 0 node 0
[ 5.371351] alloc kstat_irqs on cpu 0 node 0
[ 5.420258] pcieport-driver 0000:00:0e.0: irq 64 for MSI/MSI-X
[ 5.443244] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 5.469462] alloc irq_desc for 65 on cpu 0 node 0
[ 5.473414] alloc kstat_irqs on cpu 0 node 0
[ 5.523272] pcieport-driver 0000:40:0b.0: irq 65 for MSI/MSI-X
[ 5.546260] pcieport-driver 0000:40:0b.0: setting latency timer to 64
[ 5.580680] alloc irq_desc for 66 on cpu 0 node 0
[ 5.584652] alloc kstat_irqs on cpu 0 node 0
[ 5.633290] pcieport-driver 0000:40:0c.0: irq 66 for MSI/MSI-X
[ 5.635925] pcieport-driver 0000:40:0c.0: setting latency timer to 64
[ 5.669437] alloc irq_desc for 67 on cpu 0 node 0
[ 5.673408] alloc kstat_irqs on cpu 0 node 0
[ 5.723247] pcieport-driver 0000:40:0d.0: irq 67 for MSI/MSI-X
[ 5.745270] pcieport-driver 0000:40:0d.0: setting latency timer to 64
[ 5.782390] alloc irq_desc for 68 on cpu 0 node 0
[ 5.786362] alloc kstat_irqs on cpu 0 node 0
[ 5.836269] pcieport-driver 0000:40:0e.0: irq 68 for MSI/MSI-X
[ 5.859301] pcieport-driver 0000:40:0e.0: setting latency timer to 64
[ 5.891293] Linux agpgart interface v0.103
[ 5.914267] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 5.927833] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.962398] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 5.996727] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.029795] brd: module loaded
[ 6.046372] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 6.090544] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 6.133907] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.161286] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.189546] mice: PS/2 mouse device common for all mice
[ 6.219412] rtc_cmos 00:0a: RTC can wake from S4
[ 6.246395] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 6.280302] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 6.319331] cpuidle: using governor ladder
[ 6.342304] cpuidle: using governor menu
[ 6.344081] No iBFT detected.
[ 6.359679] TCP cubic registered
[ 6.378510] NET: Registered protocol family 10
[ 6.403987] lo: Disabled Privacy Extensions
[ 6.415737] Mobile IPv6
[ 6.429491] NET: Registered protocol family 17
[ 6.455522] registered taskstats version 1
[ 6.478963] rtc_cmos 00:0a: setting system clock to 2009-06-29 12:22:45 UTC (1246278165)
[ 6.524723] Freeing unused kernel memory: 560k freed
[ 6.552719] Write protecting the kernel read-only data: 3792k
Loading, please wait...
[ 6.714798] Uniform Multi-Platform E-IDE driver
[ 6.716253] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.718659] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.807693] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
[ 6.839316] alloc irq_desc for 23 on cpu 0 node 0
[ 6.843279] alloc kstat_irqs on cpu 0 node 0
[ 6.893319] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23
[ 6.897178] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 6.913406] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (May 6, 2009)
[ 6.913439] alloc irq_desc for 31 on cpu 0 node 0
[ 6.913442] alloc kstat_irqs on cpu 0 node 0
[ 6.913458] bnx2 0000:41:01.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 7.060694] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 7.063192] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 7.063307] SCSI subsystem initialized
[ 7.107049] ehci_hcd 0000:00:02.1: debug port 1
[ 7.131294] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 7.170326] ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000
[ 7.205670] HP CISS Driver (v 3.6.20)
[ 7.216011] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 7.216038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.216040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.216042] usb usb1: Product: EHCI Host Controller
[ 7.216043] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[ 7.216045] usb usb1: SerialNumber: 0000:00:02.1
[ 7.216115] usb usb1: configuration #1 chosen from 1 choice
[ 7.216143] hub 1-0:1.0: USB hub found
[ 7.216152] hub 1-0:1.0: 10 ports detected
[ 7.416946] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
[ 7.417379] alloc irq_desc for 26 on cpu 0 node 0
[ 7.417383] alloc kstat_irqs on cpu 0 node 0
[ 7.417397] cciss 0000:42:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
[ 7.532512] alloc irq_desc for 22 on cpu 0 node 0
[ 7.534343] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.584509] alloc kstat_irqs on cpu 0 node 0
[ 7.612264] IRQ 26/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 7.612288] cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC
[ 7.645263] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 7.716471] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22
[ 7.765763] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 7.774088] usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
[ 7.774091] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.774188] usb 1-6: configuration #1 chosen from 1 choice
[ 7.774358] hub 1-6:1.0: USB hub found
[ 7.774454] hub 1-6:1.0: 4 ports detected
[ 7.899333] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 7.929391] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 7.932286] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
[ 7.937068] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
[ 7.941190] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 31, node addr 00:1c:c4:f0:94:fa
[ 7.941290] alloc irq_desc for 32 on cpu 0 node 0
[ 7.941292] alloc kstat_irqs on cpu 0 node 0
[ 7.941302] bnx2 0000:41:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 8.154356] ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000
[ 8.164594] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
[ 8.196362] alloc irq_desc for 17 on cpu 0 node 0
[ 8.200350] alloc kstat_irqs on cpu 0 node 0
[ 8.250368] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
[ 8.276389] uhci_hcd 0000:01:04.4: UHCI Host Controller
[ 8.306431] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 3
[ 8.349350] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[ 8.356320] uhci_hcd 0000:01:04.4: HCRESET not completed yet!
[ 8.388361] uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
[ 8.421398] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.460435] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.502322] usb usb3: Product: UHCI Host Controller
[ 8.508363] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 8.543335] usb usb3: SerialNumber: 0000:01:04.4
[ 8.570386] usb usb3: configuration #1 chosen from 1 choice
[ 8.601398] hub 3-0:1.0: USB hub found
[ 8.603183] hub 3-0:1.0: 2 ports detected
[ 8.607130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.625375] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.636264] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
[ 8.641072] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
[ 8.645176] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 32, node addr 00:1c:c4:f0:94:fc
[ 8.805389] usb usb2: Product: OHCI Host Controller
[ 8.812333] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 8.847786] usb usb2: SerialNumber: 0000:00:02.0
[ 8.874426] usb usb2: configuration #1 chosen from 1 choice
[ 8.877051] hub 2-0:1.0: USB hub found
[ 8.886360] hub 2-0:1.0: 10 ports detected
[ 8.910980] amd74xx 0000:00:06.0: UDMA133 controller
[ 8.938379] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3)
[ 8.960110] amd74xx 0000:00:06.0: IDE port disabled
[ 8.985450] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 9.026428] ide0: BM-DMA at 0x0500-0x0507
[ 9.051405] Probing IDE interface ide0...
[ 9.192017] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 9.375201] usb 3-1: New USB device found, idVendor=03f0, idProduct=1027
[ 9.413398] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.422346] usb 3-1: Product: Virtual Keyboard
[ 9.437788] usb 3-1: Manufacturer: HP
[ 9.442454] usb 3-1: configuration #1 chosen from 1 choice
[ 9.486596] usbcore: registered new interface driver hiddev
[ 9.521509] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.0/input/input1
[ 9.561484] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
[ 9.591571] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb3/3-1/3-1:1.1/input/input2
[ 9.621540] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[ 9.648886] usbcore: registered new interface driver usbhid
[ 9.680681] usbhid: v2.6:USB HID core driver
[ 9.796016] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 9.812130] hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
[ 10.007035] usb 3-2: New USB device found, idVendor=03f0, idProduct=1327
[ 10.044421] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.066465] usb 3-2: Product: Virtual Hub
[ 10.068375] usb 3-2: Manufacturer: HP
[ 10.070200] usb 3-2: configuration #1 chosen from 1 choice
[ 10.105448] hub 3-2:1.0: USB hub found
[ 10.128174] hub 3-2:1.0: 7 ports detected
[ 10.148060] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 10.148839] hda: UDMA/33 mode selected
[ 10.149279] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 10.163218] libata version 3.00 loaded.
[ 10.170479] ide-cd driver 5.00
[ 10.172036] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 10.172041] Uniform CD-ROM driver Revision: 3.20
[ 10.464011] usb 2-3: new low speed USB device using ohci_hcd and address 2
[ 10.720152] usb 2-3: New USB device found, idVendor=0624, idProduct=0341
[ 10.747414] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.774710] usb 2-3: Product: HP 336047-B21
[ 10.791406] usb 2-3: Manufacturer: Avocent
[ 10.793456] usb 2-3: configuration #1 chosen from 1 choice
[ 10.842417] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input3
[ 10.882848] generic-usb 0003:0624:0341.0003: input,hidraw2: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input0
[ 10.948470] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.1/input/input4
[ 11.003649] generic-usb 0003:0624:0341.0004: input,hidraw3: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input1
[ 20.501306] uhci_hcd 0000:01:04.4: HCRESET not completed yet!
[ 20.533029] Restarting system.
[ 20.550720] machine restart
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-28 3:40 ACPI issues on HP DL585 G2 Stephen Frost
2009-06-28 4:26 ` Yinghai Lu
@ 2009-06-28 17:20 ` Alex Chiang
2009-06-28 17:35 ` Stephen Frost
2009-06-28 22:32 ` Stephen Frost
1 sibling, 2 replies; 26+ messages in thread
From: Alex Chiang @ 2009-06-28 17:20 UTC (permalink / raw)
To: Stephen Frost
Cc: linux-kernel, Daniel Frazier, David Altobelli,
nagananda.chumbalkar
Hi,
I'm just scanning mail on the weekend, but what version of the
BIOS are you on? Do you have the latest?
Thanks.
/ac
* Stephen Frost <sfrost@snowman.net>:
> Greetings,
>
> When running pretty much anything newer than 2.6.22, both the cciss
> module and the bnx2 module get stuck in a "Loading" state in
> /proc/modules. As cciss contains my root partition, I get dropped
> into an initrd after a while because root can't be found. After some
> googleing, etc, I saw a bunch of recommendations to add
> "pci=noapic noapic" to the command-line. After I did that, the box
> booted fine under 2.6.29. I figured people might like to hear about
> this issue though. Attached are a dmesg from 2.6.22 and a dmesg from
> 2.6.29 (w/ the noapic options). I've also included the output of
> hpasmcli -s "show server". If there's anything else that would be
> useful to help figure this out, please let me know.
>
> Thanks,
>
> Stephen
> Linux version 2.6.22-3-amd64 (Debian 2.6.22-6) (maks@debian.org) (gcc version 4.1.3 20071019 (prerelease) (Debian 4.1.2-17)) #1 SMP Sun Nov 4 18:18:09 UTC 2007
> Command line: root=/dev/cciss/c0d0p1 ro
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe50000 (usable)
> BIOS-e820: 000000007fe50000 - 000000007fe58000 (ACPI data)
> BIOS-e820: 000000007fe58000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> Entering add_active_range(0, 256, 523856) 1 entries of 3200 used
> Entering add_active_range(0, 1048576, 4718591) 2 entries of 3200 used
> end_pfn_map = 4718591
> DMI 2.3 present.
> ACPI: RSDP 000F4F00, 0024 (r2 HP )
> ACPI: XSDT 7FE50780, 005C (r1 HP A07 2 ?\x04 162E)
> ACPI: FACP 7FE50800, 00F4 (r3 HP A07 2 ?\x04 162E)
> ACPI: DSDT 7FE50900, 42FF (r1 HP DSDT 1 INTL 20030228)
> ACPI: FACS 7FE500C0, 0040
> ACPI: SPCR 7FE50100, 0050 (r1 HP SPCRRBSU 1 ?\x04 162E)
> ACPI: MCFG 7FE50180, 003C (r1 HP ProLiant 1 0)
> ACPI: HPET 7FE501C0, 0038 (r1 HP A07 2 ?\x04 162E)
> ACPI: SPMI 7FE50200, 0040 (r5 HP ProLiant 1 ?\x04 162E)
> ACPI: APIC 7FE50240, 0106 (r1 HP 00000083 2 0)
> ACPI: SRAT 7FE50380, 01A0 (r1 AMD HAMMER 1 AMD 1)
> SRAT: PXM 0 -> APIC 0 -> Node 0
> SRAT: PXM 0 -> APIC 1 -> Node 0
> SRAT: PXM 1 -> APIC 2 -> Node 1
> SRAT: PXM 1 -> APIC 3 -> Node 1
> SRAT: PXM 2 -> APIC 4 -> Node 2
> SRAT: PXM 2 -> APIC 5 -> Node 2
> SRAT: PXM 3 -> APIC 6 -> Node 3
> SRAT: PXM 3 -> APIC 7 -> Node 3
> SRAT: Node 0 PXM 0 0-a0000
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> SRAT: Node 0 PXM 0 0-80000000
> Entering add_active_range(0, 0, 159) 1 entries of 3200 used
> Entering add_active_range(0, 256, 523856) 1 entries of 3200 used
> SRAT: Node 0 PXM 0 0-180000000
> Entering add_active_range(0, 0, 159) 2 entries of 3200 used
> Entering add_active_range(0, 256, 523856) 2 entries of 3200 used
> Entering add_active_range(0, 1048576, 1572864) 2 entries of 3200 used
> SRAT: Node 1 PXM 1 180000000-280000000
> Entering add_active_range(1, 1572864, 2621440) 3 entries of 3200 used
> SRAT: Node 2 PXM 2 280000000-380000000
> Entering add_active_range(2, 2621440, 3670016) 4 entries of 3200 used
> SRAT: Node 3 PXM 3 380000000-480000000
> Entering add_active_range(3, 3670016, 4718591) 5 entries of 3200 used
> NUMA: Using 31 for the hash shift.
> Bootmem setup node 0 0000000000000000-0000000180000000
> Bootmem setup node 1 0000000180000000-0000000280000000
> Bootmem setup node 2 0000000280000000-0000000380000000
> Bootmem setup node 3 0000000380000000-000000047ffff000
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 4718591
> early_node_map[6] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 523856
> 0: 1048576 -> 1572864
> 1: 1572864 -> 2621440
> 2: 2621440 -> 3670016
> 3: 3670016 -> 4718591
> On node 0 totalpages: 1048047
> DMA zone: 56 pages used for memmap
> DMA zone: 1034 pages reserved
> DMA zone: 2909 pages, LIFO batch:0
> DMA32 zone: 14280 pages used for memmap
> DMA32 zone: 505480 pages, LIFO batch:31
> Normal zone: 7168 pages used for memmap
> Normal zone: 517120 pages, LIFO batch:31
> On node 1 totalpages: 1048576
> DMA zone: 0 pages used for memmap
> DMA32 zone: 0 pages used for memmap
> Normal zone: 14336 pages used for memmap
> Normal zone: 1034240 pages, LIFO batch:31
> On node 2 totalpages: 1048576
> DMA zone: 0 pages used for memmap
> DMA32 zone: 0 pages used for memmap
> Normal zone: 14336 pages used for memmap
> Normal zone: 1034240 pages, LIFO batch:31
> On node 3 totalpages: 1048575
> DMA zone: 0 pages used for memmap
> DMA32 zone: 0 pages used for memmap
> Normal zone: 14335 pages used for memmap
> Normal zone: 1034240 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x908
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> Processor #2
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
> Processor #4
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
> Processor #6
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> Processor #3
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
> Processor #5
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> Processor #7
> ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xf7cf0000] gsi_base[0])
> IOAPIC[0]: apic_id 8, address 0xf7cf0000, GSI 0-23
> ACPI: IOAPIC (id[0x09] address[0xf7fd0000] gsi_base[24])
> IOAPIC[1]: apic_id 9, address 0xf7fd0000, GSI 24-30
> ACPI: IOAPIC (id[0x0a] address[0xf7fe0000] gsi_base[31])
> IOAPIC[2]: apic_id 10, address 0xf7fe0000, GSI 31-37
> ACPI: IOAPIC (id[0x0b] address[0xf7ff0000] gsi_base[38])
> IOAPIC[3]: apic_id 11, address 0xf7ff0000, GSI 38-61
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 high edge)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ9 used by override.
> ACPI: NMI_SRC (dfl dfl global_irq 28)
> ACPI: NMI_SRC (dfl dfl global_irq 35)
> Setting APIC routing to flat
> ACPI: HPET id: 0x10228201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
> swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
> swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
> swsusp: Registered nosave memory region: 000000007fe50000 - 000000007fe58000
> swsusp: Registered nosave memory region: 000000007fe58000 - 0000000080000000
> swsusp: Registered nosave memory region: 0000000080000000 - 00000000fec00000
> swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fed00000
> swsusp: Registered nosave memory region: 00000000fed00000 - 00000000fee00000
> swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fee10000
> swsusp: Registered nosave memory region: 00000000fee10000 - 00000000ffc00000
> swsusp: Registered nosave memory region: 00000000ffc00000 - 0000000100000000
> Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
> SMP: Allowing 8 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 37896 bytes of per cpu data
> Built 4 zonelists. Total pages: 4128229
> Kernel command line: root=/dev/cciss/c0d0p1 ro
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> Marking TSC unstable due to TSCs unsynchronized
> time.c: Detected 2812.961 MHz processor.
> Console: colour VGA+ 80x25
> Checking aperture...
> CPU 0: aperture @ bde2000000 size 32 MB
> Aperture too small (32 MB)
> No AGP bridge found
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Mapping aperture over 65536 KB of RAM @ 4000000
> Memory: 16438940k/18874364k available (2008k kernel code, 336156k reserved, 945k data, 296k init)
> Calibrating delay using timer specific routine.. 5628.99 BogoMIPS (lpj=11257985)
> Security Framework v1.0.0 initialized
> SELinux: Disabled at boot.
> Capability LSM initialized
> Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 0/0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> Using local APIC timer interrupts.
> result 12557870
> Detected 12.557 MHz APIC timer.
> SMP alternatives: switching to SMP code
> Booting processor 1/8 APIC 0x2
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 5625.95 BogoMIPS (lpj=11251900)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 1/2 -> Node 1
> CPU: Physical Processor ID: 1
> CPU: Processor Core ID: 0
> Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 2/8 APIC 0x4
> Initializing CPU#2
> Calibrating delay using timer specific routine.. 5625.94 BogoMIPS (lpj=11251888)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 2/4 -> Node 2
> CPU: Physical Processor ID: 2
> CPU: Processor Core ID: 0
> Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 3/8 APIC 0x6
> Initializing CPU#3
> Calibrating delay using timer specific routine.. 5626.04 BogoMIPS (lpj=11252096)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 3/6 -> Node 3
> CPU: Physical Processor ID: 3
> CPU: Processor Core ID: 0
> Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 4/8 APIC 0x1
> Initializing CPU#4
> Calibrating delay using timer specific routine.. 5626.08 BogoMIPS (lpj=11252170)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 4/1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 5/8 APIC 0x3
> Initializing CPU#5
> Calibrating delay using timer specific routine.. 5626.16 BogoMIPS (lpj=11252324)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 5/3 -> Node 1
> CPU: Physical Processor ID: 1
> CPU: Processor Core ID: 1
> Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 6/8 APIC 0x5
> Initializing CPU#6
> Calibrating delay using timer specific routine.. 5626.18 BogoMIPS (lpj=11252370)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 6/5 -> Node 2
> CPU: Physical Processor ID: 2
> CPU: Processor Core ID: 1
> Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> SMP alternatives: switching to SMP code
> Booting processor 7/8 APIC 0x7
> Initializing CPU#7
> Calibrating delay using timer specific routine.. 5625.97 BogoMIPS (lpj=11251943)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 7/7 -> Node 3
> CPU: Physical Processor ID: 3
> CPU: Processor Core ID: 1
> Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> Brought up 8 CPUs
> migration_cost=458,599
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at 80000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: Using configuration type 1
> ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1)
> ACPI: Interpreter enabled
> ACPI: (supports S0 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Transparent bridge - 0000:00:09.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
> ACPI: PCI Root Bridge [PCI1] (0000:40)
> PCI: Probing PCI hardware (bus 40)
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
> ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
> ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
> ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
> ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
> ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
> ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10
> ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: ACPI device : hid PNP0A03
> pnp: ACPI device : hid PNP0C02
> pnp: ACPI device : hid IPI0001
> pnp: ACPI device : hid PNP0103
> pnp: ACPI device : hid PNP0200
> pnp: ACPI device : hid PNP0800
> pnp: ACPI device : hid PNP0303
> pnp: ACPI device : hid PNP0F13
> pnp: ACPI device : hid PNP0A06
> pnp: ACPI device : hid PNP0501
> pnp: ACPI device : hid PNP0003
> pnp: ACPI device : hid PNP0A03
> pnp: ACPI device : hid PNP0003
> pnp: ACPI device : hid PNP0003
> pnp: ACPI device : hid PNP0003
> pnp: PnP ACPI: found 15 devices
> ACPI: ACPI bus type pnp unregistered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> PCI-DMA: Disabling AGP.
> PCI-DMA: aperture base @ 4000000 size 65536 KB
> PCI-DMA: using GART IOMMU.
> PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
> hpet0: 3 32-bit timers, 25000000 Hz
> pnp: the driver 'system' has been registered
> pnp: match found with the PnP device '00:01' and the driver 'system'
> pnp: 00:01: ioport range 0x408-0x40f has been reserved
> pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
> pnp: 00:01: ioport range 0x700-0x73f has been reserved
> pnp: 00:01: iomem range 0x80000000-0x8fffffff has been reserved
> PCI: Bridge: 0000:00:09.0
> IO window: 2000-3fff
> MEM window: f7d00000-f7efffff
> PREFETCH window: e8000000-efffffff
> PCI: Bridge: 0000:00:0c.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:0d.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:0e.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:09.0 to 64
> PCI: Setting latency timer of device 0000:00:0c.0 to 64
> PCI: Setting latency timer of device 0000:00:0d.0 to 64
> PCI: Setting latency timer of device 0000:00:0e.0 to 64
> PCI: Bridge: 0000:40:0b.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:40:0c.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:40:0d.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:40:0e.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
> PCI: Bridge: 0000:40:10.0
> IO window: disabled.
> MEM window: f8000000-fbffffff
> PREFETCH window: 90000000-900fffff
> PCI: Bridge: 0000:40:11.0
> IO window: 4000-4fff
> MEM window: fdf00000-fdffffff
> PREFETCH window: 90100000-901fffff
> PCI: Setting latency timer of device 0000:40:0b.0 to 64
> PCI: Setting latency timer of device 0000:40:0c.0 to 64
> PCI: Setting latency timer of device 0000:40:0d.0 to 64
> PCI: Setting latency timer of device 0000:40:0e.0 to 64
> NET: Registered protocol family 2
> Time: hpet clocksource has been installed.
> IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> TCP established hash table entries: 2097152 (order: 13, 50331648 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 2097152 bind 65536)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 7574k freed
> audit: initializing netlink socket (disabled)
> audit(1246055003.828:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: Found enabled HT MSI Mapping on 0000:00:0c.0
> PCI: Found enabled HT MSI Mapping on 0000:00:0d.0
> PCI: Found enabled HT MSI Mapping on 0000:00:0e.0
> Boot video device is 0000:01:03.0
> pci 0000:01:04.4: HCRESET not completed yet!
> PCI: Found enabled HT MSI Mapping on 0000:40:0b.0
> PCI: Found enabled HT MSI Mapping on 0000:40:0c.0
> PCI: Found enabled HT MSI Mapping on 0000:40:0d.0
> PCI: Found enabled HT MSI Mapping on 0000:40:0e.0
> PCI: Setting latency timer of device 0000:00:0c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:0c.0:pcie00]
> PCI: Setting latency timer of device 0000:00:0d.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:0d.0:pcie00]
> PCI: Setting latency timer of device 0000:00:0e.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:0e.0:pcie00]
> PCI: Setting latency timer of device 0000:40:0b.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:40:0b.0:pcie00]
> PCI: Setting latency timer of device 0000:40:0c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:40:0c.0:pcie00]
> PCI: Setting latency timer of device 0000:40:0d.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:40:0d.0:pcie00]
> PCI: Setting latency timer of device 0000:40:0e.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:40:0e.0:pcie00]
> Real Time Clock Driver v1.12ac
> hpet_resources: 0xfed00000 is busy
> Linux agpgart interface v0.102 (c) Dave Jones
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> pnp: the driver 'serial' has been registered
> pnp: match found with the PnP device '00:09' and the driver 'serial'
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
> pnp: the driver 'i8042 kbd' has been registered
> pnp: match found with the PnP device '00:06' and the driver 'i8042 kbd'
> pnp: the driver 'i8042 aux' has been registered
> pnp: match found with the PnP device '00:07' and the driver 'i8042 aux'
> PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Freeing unused kernel memory: 296k freed
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
> ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
> ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNU2] -> GSI 23 (level, high) -> IRQ 23
> PCI: Setting latency timer of device 0000:00:02.1 to 64
> ehci_hcd 0000:00:02.1: EHCI Host Controller
> ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:02.1: debug port 1
> PCI: cache line size of 64 is not supported by device 0000:00:02.1
> ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7cd0000
> ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 10 ports detected
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> pnp: the driver 'ide' has been registered
> SCSI subsystem initialized
> HP CISS Driver (v 3.6.14)
> NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
> NFORCE-CK804: chipset revision 163
> NFORCE-CK804: not 100% native mode: will probe irqs later
> NFORCE-CK804: 0000:00:06.0 (rev a3) UDMA133 controller
> ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:pio, hdb:pio
> Probing IDE interface ide0...
> usb 1-6: new high speed USB device using ehci_hcd and address 3
> usb 1-6: configuration #1 chosen from 1 choice
> hub 1-6:1.0: USB hub found
> hub 1-6:1.0: 4 ports detected
> hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.5.11 (June 4, 2007)
> ACPI: PCI Interrupt 0000:41:01.0[A] -> GSI 31 (level, low) -> IRQ 31
> eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem fa000000, IRQ 31, node addr 001cc4f094fa
> ACPI: PCI Interrupt 0000:41:02.0[A] -> GSI 32 (level, low) -> IRQ 32
> eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem f8000000, IRQ 32, node addr 001cc4f094fc
> ACPI: PCI Interrupt 0000:42:02.0[A] -> GSI 26 (level, low) -> IRQ 26
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
> ACPI: PCI Interrupt 0000:01:04.4[B] -> Link [LNKX] -> GSI 17 (level, high) -> IRQ 17
> uhci_hcd 0000:01:04.4: UHCI Host Controller
> uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
> uhci_hcd 0000:01:04.4: HCRESET not completed yet!
> uhci_hcd 0000:01:04.4: irq 17, io base 0x00003800
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
> ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNU0] -> GSI 22 (level, high) -> IRQ 22
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ohci_hcd 0000:00:02.0: OHCI Host Controller
> cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 26 using DAC
> blocks= 286677120 block_size= 512
> heads=255, sectors=32, cylinders=35132
>
> blocks= 860051248 block_size= 512
> heads=255, sectors=32, cylinders=105399
>
> blocks= 286677120 block_size= 512
> heads=255, sectors=32, cylinders=35132
>
> cciss/c0d0: p1 p2
> blocks= 860051248 block_size= 512
> heads=255, sectors=32, cylinders=105399
>
> cciss/c0d1: unknown partition table
> ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:02.0: irq 22, io mem 0xf7ce0000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 10 ports detected
> libata version 2.21 loaded.
> hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> usb 2-1: new full speed USB device using uhci_hcd and address 2
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> usb 2-1: configuration #1 chosen from 1 choice
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> usb 2-2: new full speed USB device using uhci_hcd and address 3
> usb 2-2: configuration #1 chosen from 1 choice
> hub 2-2:1.0: USB hub found
> hub 2-2:1.0: 7 ports detected
> usb 3-3: new low speed USB device using ohci_hcd and address 2
> udev: starting version 141
> udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
> shpchp: shpc_init: cannot reserve MMIO region
> shpchp: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
> shpchp: shpc_init: cannot reserve MMIO region
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> usb 3-3: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver hiddev
> input: HP Virtual Keyboard as /class/input/input0
> input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
> input: HP Virtual Keyboard as /class/input/input1
> input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
> input: Avocent HP 336047-B21 as /class/input/input2
> input: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3
> input: Avocent HP 336047-B21 as /class/input/input3
> input: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> EXT3 FS on cciss/c0d0p1, internal journal
> 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
> All bugs added by David S. Miller <davem@redhat.com>
> ipmi message handler version 39.1
> ipmi device interface
> IPMI System Interface driver.
> ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
> ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
> IPMI kcs interface initialized
> ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
> ipmi_si: duplicate interface
> ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
> ACPI: PCI Interrupt 0000:01:04.6[A] -> Link [LNKW] -> GSI 16 (level, high) -> IRQ 16
> ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7df0000, slave address 0x0, irq 16
> Using irq 16
> ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
> IPMI kcs interface initialized
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-4, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on dm-0, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k
> NET: Registered protocol family 15
> Ethernet Channel Bonding Driver: v3.1.3 (June 13, 2007)
> bonding: MII link monitoring set to 100 ms
> bonding: bond0: Adding slave eth0.
> bonding: bond0: enslaving eth0 as a backup interface with a down link.
> bonding: bond0: Adding slave eth1.
> bonding: bond0: enslaving eth1 as a backup interface with a down link.
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> ADDRCONF(NETDEV_UP): bond0: link is not ready
> Initializing XFRM netlink socket
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.29-2-amd64 (Debian 2.6.29-4) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-8) ) #1 SMP Sun May 3 11:38:27 UTC 2009
> [ 0.000000] Command line: root=/dev/cciss/c0d0p1 ro pci=noapic noapic
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)
> [ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)
> [ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)
> [ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
> [ 0.000000] PCI: Unknown option `noapic'
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000
> [ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000
> [ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000
> [ 0.000000] 0000000000 - 007fe00000 page 2M
> [ 0.000000] 007fe00000 - 007fe57000 page 4k
> [ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000
> [ 0.000000] last_map_addr: 7fe57000 end: 7fe57000
> [ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000
> [ 0.000000] 0100000000 - 047fe00000 page 2M
> [ 0.000000] 047fe00000 - 047ffff000 page 4k
> [ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000
> [ 0.000000] last_map_addr: 47ffff000 end: 47ffff000
> [ 0.000000] RAMDISK: 37783000 - 37fef87c
> [ 0.000000] ACPI: RSDP 000F4F00, 0024 (r2 HP )
> [ 0.000000] ACPI: XSDT 7FE4ED00, 0074 (r1 HP ProLiant 2 ?\x04 162E)
> [ 0.000000] ACPI: FACP 7FE4ED80, 00F4 (r3 HP A07 2 ?\x04 162E)
> [ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
> [ 0.000000] ACPI: DSDT 7FE4EE80, 498A (r1 HP DSDT 1 INTL 20030228)
> [ 0.000000] ACPI: FACS 7FE4E100, 0040
> [ 0.000000] ACPI: SPCR 7FE4E140, 0050 (r1 HP SPCRRBSU 1 ?\x04 162E)
> [ 0.000000] ACPI: HPET 7FE4E1C0, 0038 (r1 HP ProLiant 2 ?\x04 162E)
> [ 0.000000] ACPI: SPMI 7FE4E200, 0040 (r5 HP ProLiant 1 ?\x04 162E)
> [ 0.000000] ACPI: ERST 7FE4E240, 01D0 (r1 HP ProLiant 1 ?\x04 162E)
> [ 0.000000] ACPI: APIC 7FE4E440, 00C6 (r1 HP ProLiant 2 0)
> [ 0.000000] ACPI: SRAT 7FE4E580, 01A0 (r1 AMD FAM_F_10 2 AMD 1)
> [ 0.000000] ACPI: FFFF 7FE4E980, 0176 (r1 HP ProLiant 1 ?\x04 162E)
> [ 0.000000] ACPI: BERT 7FE4EB00, 0030 (r1 HP ProLiant 1 ?\x04 162E)
> [ 0.000000] ACPI: HEST 7FE4EB40, 0170 (r1 HP ProLiant 1 ?\x04 162E)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
> [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
> [ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
> [ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
> [ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2
> [ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2
> [ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3
> [ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3
> [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
> [ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
> [ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000
> [ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000
> [ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000
> [ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000
> [ 0.000000] NUMA: Allocated memnodemap from 19000 - 22080
> [ 0.000000] NUMA: Using 20 for the hash shift.
> [ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000
> [ 0.000000] NODE_DATA [0000000000022080 - 000000000002a07f]
> [ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30
> [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0180000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> [ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS ==> [0000200000 - 00007ed74c]
> [ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK ==> [0037783000 - 0037fef87c]
> [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
> [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
> [ 0.000000] #6 [000000a000 - 0000019000] PGTABLE ==> [000000a000 - 0000019000]
> [ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP ==> [0000019000 - 0000022080]
> [ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000
> [ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff]
> [ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20
> [ 0.000000] (8 early reservations) ==> bootmem [0180000000 - 0280000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
> [ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS
> [ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK
> [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
> [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE
> [ 0.000000] #6 [000000a000 - 0000019000] PGTABLE
> [ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP
> [ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000
> [ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff]
> [ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20
> [ 0.000000] (8 early reservations) ==> bootmem [0280000000 - 0380000000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
> [ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS
> [ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK
> [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
> [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE
> [ 0.000000] #6 [000000a000 - 0000019000] PGTABLE
> [ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP
> [ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000
> [ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff]
> [ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20
> [ 0.000000] (8 early reservations) ==> bootmem [0380000000 - 047ffff000]
> [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
> [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
> [ 0.000000] #2 [0000200000 - 00007ed74c] TEXT DATA BSS
> [ 0.000000] #3 [0037783000 - 0037fef87c] RAMDISK
> [ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved
> [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE
> [ 0.000000] #6 [000000a000 - 0000019000] PGTABLE
> [ 0.000000] #7 [0000019000 - 0000022080] MEMNODEMAP
> [ 0.000000] found SMP MP-table at [ffff8800000f4f80] 000f4f80
> [ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
> [ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
> [ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff880280200000-ffff8802839fffff] on node 2
> [ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff880380200000-ffff8803839fffff] on node 3
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000000 -> 0x00001000
> [ 0.000000] DMA32 0x00001000 -> 0x00100000
> [ 0.000000] Normal 0x00100000 -> 0x0047ffff
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[7] active PFN ranges
> [ 0.000000] 0: 0x00000000 -> 0x0000009f
> [ 0.000000] 0: 0x00000100 -> 0x0007fe4e
> [ 0.000000] 0: 0x0007fe56 -> 0x0007fe57
> [ 0.000000] 0: 0x00100000 -> 0x00180000
> [ 0.000000] 1: 0x00180000 -> 0x00280000
> [ 0.000000] 2: 0x00280000 -> 0x00380000
> [ 0.000000] 3: 0x00380000 -> 0x0047ffff
> [ 0.000000] On node 0 totalpages: 1048046
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 1644 pages reserved
> [ 0.000000] DMA zone: 2299 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 14280 pages used for memmap
> [ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31
> [ 0.000000] Normal zone: 7168 pages used for memmap
> [ 0.000000] Normal zone: 517120 pages, LIFO batch:31
> [ 0.000000] On node 1 totalpages: 1048576
> [ 0.000000] Normal zone: 14336 pages used for memmap
> [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
> [ 0.000000] On node 2 totalpages: 1048576
> [ 0.000000] Normal zone: 14336 pages used for memmap
> [ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
> [ 0.000000] On node 3 totalpages: 1048575
> [ 0.000000] Normal zone: 14336 pages used for memmap
> [ 0.000000] Normal zone: 1034239 pages, LIFO batch:31
> [ 0.000000] Detected use of extended apic ids on hypertransport bus
> [ 0.000000] Detected use of extended apic ids on hypertransport bus
> [ 0.000000] Detected use of extended apic ids on hypertransport bus
> [ 0.000000] Detected use of extended apic ids on hypertransport bus
> [ 0.000000] ACPI: PM-Timer IO Port: 0x908
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
> [ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
> [ 0.000000] Using ACPI for processor (LAPIC) configuration information
> [ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
> [ 0.000000] Intel MultiProcessor Specification v1.4
> [ 0.000000] MPTABLE: OEM ID: HP
> [ 0.000000] MPTABLE: Product ID: PROLIANT
> [ 0.000000] MPTABLE: APIC at: 0xFEE00000
> [ 0.000000] I/O APIC #8 Version 32 at 0xD9CF0000.
> [ 0.000000] I/O APIC #9 Version 32 at 0xD9FD0000.
> [ 0.000000] I/O APIC #10 Version 32 at 0xD9FE0000.
> [ 0.000000] Processors: 8
> [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 38
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe56000
> [ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 0000000080000000
> [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
> [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
> [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
> [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
> [ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
> [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
> [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4
> [ 0.000000] PERCPU: Allocating 53248 bytes of per cpu data
> [ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 4127617
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: root=/dev/cciss/c0d0p1 ro pci=noapic noapic
> [ 0.000000] Initializing CPU#0
> [ 0.000000] Experimental hierarchical RCU implementation.
> [ 0.000000] Experimental hierarchical RCU init done.
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 2813.240 MHz processor.
> [ 0.004000] spurious 8259A interrupt: IRQ7.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Checking aperture...
> [ 0.004000] No AGP bridge found
> [ 0.004000] Node 0: aperture @ 20000000 size 32 MB
> [ 0.004000] Aperture pointing to e820 RAM. Ignoring.
> [ 0.004000] Your BIOS doesn't leave a aperture memory hole
> [ 0.004000] Please enable the IOMMU option in the BIOS setup
> [ 0.004000] This costs you 64 MB of RAM
> [ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
> [ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
> [ 0.004000] Memory: 16464280k/18874364k available (2546k kernel code, 2099272k absent, 310812k reserved, 1320k data, 552k init)
> [ 0.004000] hpet clockevent registered
> [ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5626.48 BogoMIPS (lpj=11252960)
> [ 0.004000] Security Framework initialized
> [ 0.004000] SELinux: Disabled at boot.
> [ 0.004000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
> [ 0.014230] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
> [ 0.020141] Mount-cache hash table entries: 256
> [ 0.020510] Initializing cgroup subsys ns
> [ 0.020573] Initializing cgroup subsys cpuacct
> [ 0.020639] Initializing cgroup subsys devices
> [ 0.020702] Initializing cgroup subsys freezer
> [ 0.020766] Initializing cgroup subsys net_cls
> [ 0.020873] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.020945] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.021009] CPU 0/0x0 -> Node 0
> [ 0.021068] tseg: 0000000000
> [ 0.021081] CPU: Physical Processor ID: 0
> [ 0.021142] CPU: Processor Core ID: 0
> [ 0.021208] using C1E aware idle routine
> [ 0.022533] ACPI: Core revision 20081204
> [ 0.030729] ACPI: setting ELCR to 0200 (from 8c20)
> [ 0.031017] Setting APIC routing to flat
> [ 0.031082] CPU0: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.032001] Booting processor 1 APIC 0x2 ip 0x6000
> [ 0.004000] Initializing CPU#1
> [ 0.004000] Calibrating delay using timer specific routine.. 5625.85 BogoMIPS (lpj=11251710)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.004000] CPU 1/0x2 -> Node 1
> [ 0.004000] CPU: Physical Processor ID: 1
> [ 0.004000] CPU: Processor Core ID: 0
> [ 0.120174] CPU1: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.120985] Booting processor 2 APIC 0x4 ip 0x6000
> [ 0.004000] Initializing CPU#2
> [ 0.004000] Calibrating delay using timer specific routine.. 5625.89 BogoMIPS (lpj=11251797)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.004000] CPU 2/0x4 -> Node 2
> [ 0.004000] CPU: Physical Processor ID: 2
> [ 0.004000] CPU: Processor Core ID: 0
> [ 0.208210] CPU2: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.209028] Booting processor 3 APIC 0x6 ip 0x6000
> [ 0.004000] Initializing CPU#3
> [ 0.004000] Calibrating delay using timer specific routine.. 5625.92 BogoMIPS (lpj=11251857)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.004000] CPU 3/0x6 -> Node 3
> [ 0.004000] CPU: Physical Processor ID: 3
> [ 0.004000] CPU: Processor Core ID: 0
> [ 0.300192] CPU3: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.300903] Booting processor 4 APIC 0x1 ip 0x6000
> [ 0.004000] Initializing CPU#4
> [ 0.004000] Calibrating delay using timer specific routine.. 5625.88 BogoMIPS (lpj=11251766)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.004000] CPU 4/0x1 -> Node 0
> [ 0.004000] CPU: Physical Processor ID: 0
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.388198] CPU4: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.388778] Booting processor 5 APIC 0x3 ip 0x6000
> [ 0.004000] Initializing CPU#5
> [ 0.004000] Calibrating delay using timer specific routine.. 5625.90 BogoMIPS (lpj=11251806)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.004000] CPU 5/0x3 -> Node 1
> [ 0.004000] CPU: Physical Processor ID: 1
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.476249] CPU5: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.477037] Booting processor 6 APIC 0x5 ip 0x6000
> [ 0.004000] Initializing CPU#6
> [ 0.004000] Calibrating delay using timer specific routine.. 5625.88 BogoMIPS (lpj=11251772)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.004000] CPU 6/0x5 -> Node 2
> [ 0.004000] CPU: Physical Processor ID: 2
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.568202] CPU6: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.569002] Booting processor 7 APIC 0x7 ip 0x6000
> [ 0.004000] Initializing CPU#7
> [ 0.004000] Calibrating delay using timer specific routine.. 5625.87 BogoMIPS (lpj=11251745)
> [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
> [ 0.004000] CPU 7/0x7 -> Node 3
> [ 0.004000] CPU: Physical Processor ID: 3
> [ 0.004000] CPU: Processor Core ID: 1
> [ 0.656199] CPU7: Dual-Core AMD Opteron(tm) Processor 8220 stepping 03
> [ 0.656784] Brought up 8 CPUs
> [ 0.656845] Total of 8 processors activated (45007.70 BogoMIPS).
> [ 0.657027] CPU0 attaching sched-domain:
> [ 0.657029] domain 0: span 0,4 level CPU
> [ 0.657031] groups: 0 4
> [ 0.657034] domain 1: span 0-7 level NODE
> [ 0.657036] groups: 0,4 1,5 2,6 3,7
> [ 0.657042] CPU1 attaching sched-domain:
> [ 0.657043] domain 0: span 1,5 level CPU
> [ 0.657044] groups: 1 5
> [ 0.657047] domain 1: span 0-7 level NODE
> [ 0.657048] groups: 1,5 2,6 3,7 0,4
> [ 0.657054] CPU2 attaching sched-domain:
> [ 0.657055] domain 0: span 2,6 level CPU
> [ 0.657056] groups: 2 6
> [ 0.657059] domain 1: span 0-7 level NODE
> [ 0.657060] groups: 2,6 3,7 0,4 1,5
> [ 0.657065] CPU3 attaching sched-domain:
> [ 0.657067] domain 0: span 3,7 level CPU
> [ 0.657068] groups: 3 7
> [ 0.657071] domain 1: span 0-7 level NODE
> [ 0.657072] groups: 3,7 0,4 1,5 2,6
> [ 0.657077] CPU4 attaching sched-domain:
> [ 0.657078] domain 0: span 0,4 level CPU
> [ 0.657080] groups: 4 0
> [ 0.657082] domain 1: span 0-7 level NODE
> [ 0.657084] groups: 0,4 1,5 2,6 3,7
> [ 0.657089] CPU5 attaching sched-domain:
> [ 0.657090] domain 0: span 1,5 level CPU
> [ 0.657092] groups: 5 1
> [ 0.657094] domain 1: span 0-7 level NODE
> [ 0.657095] groups: 1,5 2,6 3,7 0,4
> [ 0.657100] CPU6 attaching sched-domain:
> [ 0.657102] domain 0: span 2,6 level CPU
> [ 0.657103] groups: 6 2
> [ 0.657106] domain 1: span 0-7 level NODE
> [ 0.657107] groups: 2,6 3,7 0,4 1,5
> [ 0.657112] CPU7 attaching sched-domain:
> [ 0.657114] domain 0: span 3,7 level CPU
> [ 0.657115] groups: 7 3
> [ 0.657118] domain 1: span 0-7 level NODE
> [ 0.657119] groups: 3,7 0,4 1,5 2,6
> [ 0.657335] net_namespace: 1888 bytes
> [ 0.657335] Booting paravirtualized kernel on bare hardware
> [ 0.657335] regulator: core version 0.5
> [ 0.657335] NET: Registered protocol family 16
> [ 0.657335] node 0 link 1: io port [1000, 2fff]
> [ 0.657335] node 1 link 2: io port [3000, ffff]
> [ 0.657335] TOM: 0000000080000000 aka 2048M
> [ 0.657335] node 0 link 1: mmio [d0000000, d9efffff]
> [ 0.657335] node 1 link 2: mmio [d9f00000, dfefffff]
> [ 0.657335] node 0 link 1: mmio [e0000000, e3ffffff]
> [ 0.657335] node 1 link 2: mmio [e4000000, e7ffffff]
> [ 0.657335] node 0 link 1: mmio [a0000, bffff]
> [ 0.657335] TOM2: 0000000480000000 aka 18432M
> [ 0.657335] bus: [00,3f] on node 0 link 1
> [ 0.657335] bus: 00 index 0 io port: [0, 2fff]
> [ 0.657335] bus: 00 index 1 mmio: [80000000, d9efffff]
> [ 0.657335] bus: 00 index 2 mmio: [dff00000, e3ffffff]
> [ 0.657335] bus: 00 index 3 mmio: [a0000, bffff]
> [ 0.657335] bus: 00 index 4 mmio: [e8000000, ffffffff]
> [ 0.657335] bus: 00 index 5 mmio: [480000000, fcffffffff]
> [ 0.657335] bus: [40,7f] on node 1 link 2
> [ 0.657335] bus: 40 index 0 io port: [3000, ffff]
> [ 0.657335] bus: 40 index 1 mmio: [d9f00000, dfefffff]
> [ 0.657335] bus: 40 index 2 mmio: [e4000000, e7ffffff]
> [ 0.657335] ACPI: bus type pci registered
> [ 0.657335] PCI: Using configuration type 1 for base access
> [ 0.657335] PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort.
> [ 0.660277] bio: create slab <bio-0> at 0
> [ 0.660435] ACPI: EC: Look up EC in DSDT
> [ 0.668759] ACPI: SSDT 7FE58000, 0AC4 (r2 HP PNOWSSDT 2 HP 1)
> [ 0.669531] ACPI: Interpreter enabled
> [ 0.669592] ACPI: (supports S0 S4 S5)
> [ 0.669741] ACPI: Using PIC for interrupt routing
> [ 0.676178] ACPI: No dock devices found.
> [ 0.676256] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.676358] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff]
> [ 0.676358] pci 0000:00:02.0: supports D1 D2
> [ 0.676358] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.676358] pci 0000:00:02.0: PME# disabled
> [ 0.676358] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff]
> [ 0.676358] pci 0000:00:02.1: supports D1 D2
> [ 0.676358] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.676358] pci 0000:00:02.1: PME# disabled
> [ 0.676422] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f]
> [ 0.676464] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.676535] pci 0000:00:0c.0: PME# disabled
> [ 0.676621] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.676691] pci 0000:00:0d.0: PME# disabled
> [ 0.676772] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.676842] pci 0000:00:0e.0: PME# disabled
> [ 0.677135] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
> [ 0.677140] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
> [ 0.677145] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff]
> [ 0.677160] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
> [ 0.677179] pci 0000:01:03.0: supports D1 D2
> [ 0.677195] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
> [ 0.677200] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff]
> [ 0.677232] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
> [ 0.677302] pci 0000:01:04.0: PME# disabled
> [ 0.677382] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
> [ 0.677387] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff]
> [ 0.677392] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff]
> [ 0.677397] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff]
> [ 0.677409] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]
> [ 0.677431] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
> [ 0.677501] pci 0000:01:04.2: PME# disabled
> [ 0.677594] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
> [ 0.677622] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
> [ 0.677692] pci 0000:01:04.4: PME# disabled
> [ 0.680022] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff]
> [ 0.680058] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
> [ 0.680128] pci 0000:01:04.6: PME# disabled
> [ 0.680216] pci 0000:00:09.0: transparent bridge
> [ 0.680279] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
> [ 0.680282] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff]
> [ 0.680284] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
> [ 0.680387] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.680478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
> [ 0.680598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
> [ 0.680716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
> [ 0.680830] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
> [ 0.684265] ACPI: PCI Root Bridge [PCI1] (0000:40)
> [ 0.684313] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.684313] pci 0000:40:0b.0: PME# disabled
> [ 0.684313] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.684359] pci 0000:40:0c.0: PME# disabled
> [ 0.684451] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.684522] pci 0000:40:0d.0: PME# disabled
> [ 0.684613] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.684684] pci 0000:40:0e.0: PME# disabled
> [ 0.684776] pci 0000:40:10.0: Enabling HT MSI Mapping
> [ 0.684905] pci 0000:40:11.0: Enabling HT MSI Mapping
> [ 0.685156] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff]
> [ 0.685169] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
> [ 0.685189] pci 0000:41:01.0: PME# supported from D3hot D3cold
> [ 0.685258] pci 0000:41:01.0: PME# disabled
> [ 0.685338] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
> [ 0.685351] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]
> [ 0.685371] pci 0000:41:02.0: PME# supported from D3hot D3cold
> [ 0.685439] pci 0000:41:02.0: PME# disabled
> [ 0.685523] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff]
> [ 0.685546] pci 0000:42:02.0: reg 10 64bit mmio: [0xdfef0000-0xdfef1fff]
> [ 0.685550] pci 0000:42:02.0: reg 18 io port: [0x3000-0x30ff]
> [ 0.685556] pci 0000:42:02.0: reg 1c 64bit mmio: [0xdfe80000-0xdfebffff]
> [ 0.685563] pci 0000:42:02.0: reg 30 32bit mmio: [0x000000-0x03ffff]
> [ 0.685583] pci 0000:42:02.0: supports D1
> [ 0.685606] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff]
> [ 0.685608] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
> [ 0.685629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
> [ 0.685710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
> [ 0.685921] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
> [ 0.686049] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
> [ 0.686172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
> [ 0.688045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
> [ 0.688308] ACPI: PCI Interrupt Link [LNKW] (IRQs 5 7 10 11) *0, disabled.
> [ 0.688600] ACPI: PCI Interrupt Link [LNKX] (IRQs 5 7 10 11) *0, disabled.
> [ 0.689025] ACPI: PCI Interrupt Link [LNKY] (IRQs 5 7 10 11) *0, disabled.
> [ 0.692017] ACPI: PCI Interrupt Link [LNKZ] (IRQs 5 7 10 11) *0, disabled.
> [ 0.692443] ACPI: PCI Interrupt Link [LNU0] (IRQs *5 7 10 11)
> [ 0.692816] ACPI: PCI Interrupt Link [LNU2] (IRQs 5 7 10 *11)
> [ 0.693191] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *0, disabled.
> [ 0.693615] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *0, disabled.
> [ 0.694042] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
> [ 0.694462] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
> [ 0.694764] usbcore: registered new interface driver usbfs
> [ 0.694764] usbcore: registered new interface driver hub
> [ 0.696023] usbcore: registered new device driver usb
> [ 0.696081] PCI: Using ACPI for IRQ routing
> [ 0.696184] Expanded resource reserved due to conflict with PCI Bus #00
> [ 0.696254] Expanded resource reserved due to conflict with PCI Bus #00
> [ 0.716121] PCI-DMA: Disabling AGP.
> [ 0.716292] PCI-DMA: aperture base @ 20000000 size 65536 KB
> [ 0.716292] PCI-DMA: using GART IOMMU.
> [ 0.716292] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
> [ 0.716911] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
> [ 0.717072] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
> [ 0.740013] Switched to high resolution mode on CPU 0
> [ 0.740185] Switched to high resolution mode on CPU 4
> [ 0.740200] Switched to high resolution mode on CPU 2
> [ 0.740204] Switched to high resolution mode on CPU 6
> [ 0.740212] Switched to high resolution mode on CPU 5
> [ 0.740220] Switched to high resolution mode on CPU 1
> [ 0.740234] Switched to high resolution mode on CPU 3
> [ 0.740239] Switched to high resolution mode on CPU 7
> [ 0.748011] pnp: PnP ACPI init
> [ 0.748069] ACPI: bus type pnp registered
> [ 0.754229] pnp: PnP ACPI: found 16 devices
> [ 0.754292] ACPI: ACPI bus type pnp unregistered
> [ 0.754366] system 00:01: ioport range 0x408-0x40f has been reserved
> [ 0.754435] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.754505] system 00:01: ioport range 0x700-0x73f has been reserved
> [ 0.754575] system 00:01: ioport range 0x800-0x8fe has been reserved
> [ 0.754645] system 00:01: ioport range 0x900-0x9fe has been reserved
> [ 0.754714] system 00:01: ioport range 0x9ff-0x9ff has been reserved
> [ 0.754784] system 00:01: ioport range 0xa00-0xafe has been reserved
> [ 0.754854] system 00:01: ioport range 0xaff-0xaff has been reserved
> [ 0.754923] system 00:01: ioport range 0xb00-0xbfe has been reserved
> [ 0.754993] system 00:01: ioport range 0xbff-0xbff has been reserved
> [ 0.755063] system 00:01: ioport range 0xc80-0xc83 has been reserved
> [ 0.755133] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
> [ 0.755202] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
> [ 0.755273] system 00:01: ioport range 0xf50-0xf58 has been reserved
> [ 0.755343] system 00:01: ioport range 0xca0-0xca1 has been reserved
> [ 0.755413] system 00:01: ioport range 0xca4-0xca5 has been reserved
> [ 0.755483] system 00:01: ioport range 0xc00-0xc03 has been reserved
> [ 0.755552] system 00:01: ioport range 0x2f8-0x2ff has been reserved
> [ 0.761161] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
> [ 0.761230] pci 0000:00:09.0: IO window: 0x1000-0x2fff
> [ 0.761297] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff
> [ 0.761366] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
> [ 0.761465] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08
> [ 0.761534] pci 0000:00:0c.0: IO window: disabled
> [ 0.761598] pci 0000:00:0c.0: MEM window: disabled
> [ 0.761663] pci 0000:00:0c.0: PREFETCH window: disabled
> [ 0.761730] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
> [ 0.761797] pci 0000:00:0d.0: IO window: disabled
> [ 0.761862] pci 0000:00:0d.0: MEM window: disabled
> [ 0.761926] pci 0000:00:0d.0: PREFETCH window: disabled
> [ 0.761993] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
> [ 0.762061] pci 0000:00:0e.0: IO window: disabled
> [ 0.762125] pci 0000:00:0e.0: MEM window: disabled
> [ 0.762189] pci 0000:00:0e.0: PREFETCH window: disabled
> [ 0.762261] pci 0000:00:09.0: setting latency timer to 64
> [ 0.762264] pci 0000:00:0c.0: setting latency timer to 64
> [ 0.762267] pci 0000:00:0d.0: setting latency timer to 64
> [ 0.762271] pci 0000:00:0e.0: setting latency timer to 64
> [ 0.762276] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f
> [ 0.762343] pci 0000:40:0b.0: IO window: disabled
> [ 0.762408] pci 0000:40:0b.0: MEM window: disabled
> [ 0.762473] pci 0000:40:0b.0: PREFETCH window: disabled
> [ 0.762541] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c
> [ 0.762608] pci 0000:40:0c.0: IO window: disabled
> [ 0.762673] pci 0000:40:0c.0: MEM window: disabled
> [ 0.762738] pci 0000:40:0c.0: PREFETCH window: disabled
> [ 0.762806] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49
> [ 0.762873] pci 0000:40:0d.0: IO window: disabled
> [ 0.762938] pci 0000:40:0d.0: MEM window: disabled
> [ 0.763003] pci 0000:40:0d.0: PREFETCH window: disabled
> [ 0.763071] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46
> [ 0.763138] pci 0000:40:0e.0: IO window: disabled
> [ 0.763203] pci 0000:40:0e.0: MEM window: disabled
> [ 0.763268] pci 0000:40:0e.0: PREFETCH window: disabled
> [ 0.763336] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41
> [ 0.763404] pci 0000:40:10.0: IO window: disabled
> [ 0.763469] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff
> [ 0.763538] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x000000d9ffffff
> [ 0.763639] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42
> [ 0.763707] pci 0000:40:11.0: IO window: 0x3000-0x3fff
> [ 0.763774] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff
> [ 0.763842] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x000000de0fffff
> [ 0.763944] pci 0000:40:0b.0: setting latency timer to 64
> [ 0.763949] pci 0000:40:0c.0: setting latency timer to 64
> [ 0.763953] pci 0000:40:0d.0: setting latency timer to 64
> [ 0.763957] pci 0000:40:0e.0: setting latency timer to 64
> [ 0.763964] pci_bus 0000:00: resource 0 io: [0x00-0x2fff]
> [ 0.763965] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff]
> [ 0.763967] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff]
> [ 0.763968] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
> [ 0.763970] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff]
> [ 0.763972] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff]
> [ 0.763974] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]
> [ 0.763975] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff]
> [ 0.763977] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xd7ffffff]
> [ 0.763978] pci_bus 0000:01: resource 3 io: [0x00-0x2fff]
> [ 0.763980] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff]
> [ 0.763982] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff]
> [ 0.763983] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
> [ 0.763985] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff]
> [ 0.763986] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff]
> [ 0.763988] pci_bus 0000:08: resource 0 mem: [0x0-0x0]
> [ 0.764005] pci_bus 0000:08: resource 1 mem: [0x0-0x0]
> [ 0.764006] pci_bus 0000:08: resource 2 mem: [0x0-0x0]
> [ 0.764008] pci_bus 0000:08: resource 3 mem: [0x0-0x0]
> [ 0.764009] pci_bus 0000:05: resource 0 mem: [0x0-0x0]
> [ 0.764010] pci_bus 0000:05: resource 1 mem: [0x0-0x0]
> [ 0.764012] pci_bus 0000:05: resource 2 mem: [0x0-0x0]
> [ 0.764013] pci_bus 0000:05: resource 3 mem: [0x0-0x0]
> [ 0.764015] pci_bus 0000:02: resource 0 mem: [0x0-0x0]
> [ 0.764016] pci_bus 0000:02: resource 1 mem: [0x0-0x0]
> [ 0.764018] pci_bus 0000:02: resource 2 mem: [0x0-0x0]
> [ 0.764019] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
> [ 0.764021] pci_bus 0000:40: resource 0 io: [0x3000-0xffff]
> [ 0.764023] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff]
> [ 0.764024] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff]
> [ 0.764026] pci_bus 0000:4f: resource 0 mem: [0x0-0x0]
> [ 0.764027] pci_bus 0000:4f: resource 1 mem: [0x0-0x0]
> [ 0.764029] pci_bus 0000:4f: resource 2 mem: [0x0-0x0]
> [ 0.764030] pci_bus 0000:4f: resource 3 mem: [0x0-0x0]
> [ 0.764032] pci_bus 0000:4c: resource 0 mem: [0x0-0x0]
> [ 0.764033] pci_bus 0000:4c: resource 1 mem: [0x0-0x0]
> [ 0.764034] pci_bus 0000:4c: resource 2 mem: [0x0-0x0]
> [ 0.764036] pci_bus 0000:4c: resource 3 mem: [0x0-0x0]
> [ 0.764037] pci_bus 0000:49: resource 0 mem: [0x0-0x0]
> [ 0.764039] pci_bus 0000:49: resource 1 mem: [0x0-0x0]
> [ 0.764040] pci_bus 0000:49: resource 2 mem: [0x0-0x0]
> [ 0.764042] pci_bus 0000:49: resource 3 mem: [0x0-0x0]
> [ 0.764043] pci_bus 0000:46: resource 0 mem: [0x0-0x0]
> [ 0.764045] pci_bus 0000:46: resource 1 mem: [0x0-0x0]
> [ 0.764046] pci_bus 0000:46: resource 2 mem: [0x0-0x0]
> [ 0.764047] pci_bus 0000:46: resource 3 mem: [0x0-0x0]
> [ 0.764049] pci_bus 0000:41: resource 0 mem: [0x0-0x0]
> [ 0.764050] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff]
> [ 0.764052] pci_bus 0000:41: resource 2 mem: [0xd9f00000-0xd9ffffff]
> [ 0.764053] pci_bus 0000:41: resource 3 mem: [0x0-0x0]
> [ 0.764055] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff]
> [ 0.764057] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff]
> [ 0.764058] pci_bus 0000:42: resource 2 mem: [0xde000000-0xde0fffff]
> [ 0.764060] pci_bus 0000:42: resource 3 mem: [0x0-0x0]
> [ 0.764271] NET: Registered protocol family 2
> [ 0.836568] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
> [ 0.840992] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
> [ 0.846583] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.847318] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.847389] TCP reno registered
> [ 0.856310] NET: Registered protocol family 1
> [ 0.856533] checking if image is initramfs... it is
> [ 1.431615] Freeing initrd memory: 8626k freed
> [ 1.440313] audit: initializing netlink socket (disabled)
> [ 1.440394] type=2000 audit(1246157873.440:1): initialized
> [ 1.441867] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 1.442386] VFS: Disk quotas dquot_6.5.2
> [ 1.442506] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.442683] msgmni has been set to 32173
> [ 1.442938] alg: No test for stdrng (krng)
> [ 1.443118] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 1.443217] io scheduler noop registered
> [ 1.443278] io scheduler anticipatory registered
> [ 1.443341] io scheduler deadline registered
> [ 1.443475] io scheduler cfq registered (default)
> [ 1.476024] pci 0000:00:0c.0: Found enabled HT MSI Mapping
> [ 1.476101] pci 0000:00:0d.0: Found enabled HT MSI Mapping
> [ 1.476175] pci 0000:00:0e.0: Found enabled HT MSI Mapping
> [ 1.476270] pci 0000:01:03.0: Boot video device
> [ 1.476286] pci 0000:01:04.4: HCRESET not completed yet!
> [ 1.476379] pci 0000:40:0b.0: Found enabled HT MSI Mapping
> [ 1.476457] pci 0000:40:0c.0: Found enabled HT MSI Mapping
> [ 1.476535] pci 0000:40:0d.0: Found enabled HT MSI Mapping
> [ 1.476613] pci 0000:40:0e.0: Found enabled HT MSI Mapping
> [ 1.476907] pcieport-driver 0000:00:0c.0: setting latency timer to 64
> [ 1.476928] alloc irq_desc for 38 on cpu 0 node 0
> [ 1.476930] alloc kstat_irqs on cpu 0 node 0
> [ 1.476941] pcieport-driver 0000:00:0c.0: irq 38 for MSI/MSI-X
> [ 1.477028] pcieport-driver 0000:00:0d.0: setting latency timer to 64
> [ 1.477046] alloc irq_desc for 39 on cpu 0 node 0
> [ 1.477048] alloc kstat_irqs on cpu 0 node 0
> [ 1.477053] pcieport-driver 0000:00:0d.0: irq 39 for MSI/MSI-X
> [ 1.477133] pcieport-driver 0000:00:0e.0: setting latency timer to 64
> [ 1.477151] alloc irq_desc for 40 on cpu 0 node 0
> [ 1.477152] alloc kstat_irqs on cpu 0 node 0
> [ 1.477156] pcieport-driver 0000:00:0e.0: irq 40 for MSI/MSI-X
> [ 1.477251] pcieport-driver 0000:40:0b.0: setting latency timer to 64
> [ 1.477288] alloc irq_desc for 41 on cpu 0 node 0
> [ 1.477291] alloc kstat_irqs on cpu 0 node 0
> [ 1.477302] pcieport-driver 0000:40:0b.0: irq 41 for MSI/MSI-X
> [ 1.477439] pcieport-driver 0000:40:0c.0: setting latency timer to 64
> [ 1.477467] alloc irq_desc for 42 on cpu 0 node 0
> [ 1.477468] alloc kstat_irqs on cpu 0 node 0
> [ 1.477473] pcieport-driver 0000:40:0c.0: irq 42 for MSI/MSI-X
> [ 1.477576] pcieport-driver 0000:40:0d.0: setting latency timer to 64
> [ 1.477603] alloc irq_desc for 43 on cpu 0 node 0
> [ 1.477605] alloc kstat_irqs on cpu 0 node 0
> [ 1.477610] pcieport-driver 0000:40:0d.0: irq 43 for MSI/MSI-X
> [ 1.477709] pcieport-driver 0000:40:0e.0: setting latency timer to 64
> [ 1.477736] alloc irq_desc for 44 on cpu 0 node 0
> [ 1.477738] alloc kstat_irqs on cpu 0 node 0
> [ 1.477742] pcieport-driver 0000:40:0e.0: irq 44 for MSI/MSI-X
> [ 1.482998] Linux agpgart interface v0.103
> [ 1.483040] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.483223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.483368] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [ 1.483877] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.486606] brd: module loaded
> [ 1.486743] input: Macintosh mouse button emulation as /devices/virtual/input/input0
> [ 1.487067] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
> [ 1.488782] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.488828] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.512152] mice: PS/2 mouse device common for all mice
> [ 1.512303] rtc_cmos 00:0a: RTC can wake from S4
> [ 1.512438] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
> [ 1.512500] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
> [ 1.512603] cpuidle: using governor ladder
> [ 1.512644] cpuidle: using governor menu
> [ 1.512689] No iBFT detected.
> [ 1.513078] TCP cubic registered
> [ 1.513118] NET: Registered protocol family 17
> [ 1.513377] registered taskstats version 1
> [ 1.513698] rtc_cmos 00:0a: setting system clock to 2009-06-28 02:57:54 UTC (1246157874)
> [ 1.513822] Freeing unused kernel memory: 552k freed
> [ 1.614405] processor ACPI_CPU:00: registered as cooling_device0
> [ 1.614551] processor ACPI_CPU:01: registered as cooling_device1
> [ 1.614678] processor ACPI_CPU:02: registered as cooling_device2
> [ 1.614812] processor ACPI_CPU:03: registered as cooling_device3
> [ 1.614938] processor ACPI_CPU:04: registered as cooling_device4
> [ 1.615065] processor ACPI_CPU:05: registered as cooling_device5
> [ 1.615193] processor ACPI_CPU:06: registered as cooling_device6
> [ 1.615324] processor ACPI_CPU:07: registered as cooling_device7
> [ 1.657949] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.658286] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 11
> [ 1.658334] PCI: setting IRQ 11 as level-triggered
> [ 1.658338] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 11 (level, low) -> IRQ 11
> [ 1.658443] ehci_hcd 0000:00:02.1: setting latency timer to 64
> [ 1.658446] ehci_hcd 0000:00:02.1: EHCI Host Controller
> [ 1.658612] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
> [ 1.658709] ehci_hcd 0000:00:02.1: debug port 1
> [ 1.658751] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
> [ 1.658759] ehci_hcd 0000:00:02.1: irq 11, io mem 0xd9cd0000
> [ 1.665613] Uniform Multi-Platform E-IDE driver
> [ 1.670705] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.672039] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
> [ 1.672137] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.672186] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.672245] usb usb1: Product: EHCI Host Controller
> [ 1.672287] usb usb1: Manufacturer: Linux 2.6.29-2-amd64 ehci_hcd
> [ 1.672330] usb usb1: SerialNumber: 0000:00:02.1
> [ 1.672440] usb usb1: configuration #1 chosen from 1 choice
> [ 1.672508] hub 1-0:1.0: USB hub found
> [ 1.672557] hub 1-0:1.0: 10 ports detected
> [ 1.672750] amd74xx 0000:00:06.0: UDMA133 controller
> [ 1.672794] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3)
> [ 1.672851] amd74xx 0000:00:06.0: IDE port disabled
> [ 1.672901] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
> [ 1.672950] ide0: BM-DMA at 0x0500-0x0507
> [ 1.672996] Probing IDE interface ide0...
> [ 1.682210] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.9.3 (March 17, 2009)
> [ 1.682567] ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 10
> [ 1.682613] PCI: setting IRQ 10 as level-triggered
> [ 1.682617] bnx2 0000:41:01.0: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10
> [ 1.694019] SCSI subsystem initialized
> [ 1.698233] HP CISS Driver (v 3.6.20)
> [ 1.762381] uhci_hcd: USB Universal Host Controller Interface driver
> [ 2.036014] usb 1-6: new high speed USB device using ehci_hcd and address 3
> [ 2.160042] bnx2 0000:41:01.0: firmware: requesting bnx2-06-4.6.16.fw
> [ 2.165414] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 10, node addr 00:1c:c4:f0:94:fa
> [ 2.170717] ACPI: PCI Interrupt Link [LNKY] enabled at IRQ 11
> [ 2.170764] cciss 0000:42:02.0: PCI INT A -> Link[LNKY] -> GSI 11 (level, low) -> IRQ 11
> [ 2.171216] usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
> [ 2.171275] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 2.171399] usb 1-6: configuration #1 chosen from 1 choice
> [ 2.171617] hub 1-6:1.0: USB hub found
> [ 2.171735] hub 1-6:1.0: 4 ports detected
> [ 2.288015] IRQ 11/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
> [ 2.288077] cciss0: <0x3220> at PCI 0000:42:02.0 IRQ 11 using DAC
> [ 2.289014] blocks= 286677120 block_size= 512
> [ 2.289141] heads=255, sectors=32, cylinders=35132
> [ 2.289142]
> [ 2.289463] blocks= 286677120 block_size= 512
> [ 2.289584] heads=255, sectors=32, cylinders=35132
> [ 2.289585]
> [ 2.289675] cciss/c0d0: p1 p2
> [ 2.290205] blocks= 860051248 block_size= 512
> [ 2.290310] heads=255, sectors=32, cylinders=105399
> [ 2.290311]
> [ 2.290568] blocks= 860051248 block_size= 512
> [ 2.290684] heads=255, sectors=32, cylinders=105399
> [ 2.290685]
> [ 2.290776] cciss/c0d1: unknown partition table
> [ 2.303181] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 10
> [ 2.303228] bnx2 0000:41:02.0: PCI INT A -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
> [ 2.416129] hda: HL-DT-ST DVDRAM GSA-T20L, ATAPI CD/DVD-ROM drive
> [ 2.748059] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
> [ 2.748840] hda: UDMA/33 mode selected
> [ 2.749272] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> [ 2.749407] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
> [ 2.749478] uhci_hcd 0000:01:04.4: UHCI Host Controller
> [ 2.749617] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2
> [ 2.749684] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
> [ 2.749740] uhci_hcd 0000:01:04.4: HCRESET not completed yet!
> [ 2.749797] uhci_hcd 0000:01:04.4: irq 10, io base 0x00001800
> [ 2.749888] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.749941] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.750004] usb usb2: Product: UHCI Host Controller
> [ 2.750046] usb usb2: Manufacturer: Linux 2.6.29-2-amd64 uhci_hcd
> [ 2.750089] usb usb2: SerialNumber: 0000:01:04.4
> [ 2.750174] usb usb2: configuration #1 chosen from 1 choice
> [ 2.750243] hub 2-0:1.0: USB hub found
> [ 2.750288] hub 2-0:1.0: 2 ports detected
> [ 2.750700] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 5
> [ 2.750743] PCI: setting IRQ 5 as level-triggered
> [ 2.750747] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 5 (level, low) -> IRQ 5
> [ 2.750845] ohci_hcd 0000:00:02.0: setting latency timer to 64
> [ 2.750847] ohci_hcd 0000:00:02.0: OHCI Host Controller
> [ 2.750948] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
> [ 2.751023] ohci_hcd 0000:00:02.0: irq 5, io mem 0xd9ce0000
> [ 2.780274] bnx2 0000:41:02.0: firmware: requesting bnx2-06-4.6.16.fw
> [ 2.785730] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 10, node addr 00:1c:c4:f0:94:fc
> [ 2.806032] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.806086] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.806145] usb usb3: Product: OHCI Host Controller
> [ 2.806186] usb usb3: Manufacturer: Linux 2.6.29-2-amd64 ohci_hcd
> [ 2.806229] usb usb3: SerialNumber: 0000:00:02.0
> [ 2.806352] usb usb3: configuration #1 chosen from 1 choice
> [ 2.806420] hub 3-0:1.0: USB hub found
> [ 2.806468] hub 3-0:1.0: 10 ports detected
> [ 2.819166] libata version 3.00 loaded.
> [ 2.827113] ide-cd driver 5.00
> [ 2.829247] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
> [ 2.829435] Uniform CD-ROM driver Revision: 3.20
> [ 2.910065] device-mapper: uevent: version 1.0.3
> [ 2.910249] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
> [ 2.943632] kjournald starting. Commit interval 5 seconds
> [ 2.943642] EXT3-fs: mounted filesystem with ordered data mode.
> [ 3.060014] usb 2-1: new full speed USB device using uhci_hcd and address 2
> [ 3.206861] usb 2-1: New USB device found, idVendor=03f0, idProduct=1027
> [ 3.206921] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.206967] usb 2-1: Product: Virtual Keyboard
> [ 3.207007] usb 2-1: Manufacturer: HP
> [ 3.207126] usb 2-1: configuration #1 chosen from 1 choice
> [ 3.324023] usb 2-2: new full speed USB device using uhci_hcd and address 3
> [ 3.471454] usb 2-2: New USB device found, idVendor=03f0, idProduct=1327
> [ 3.471514] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.471560] usb 2-2: Product: Virtual Hub
> [ 3.471600] usb 2-2: Manufacturer: HP
> [ 3.471716] usb 2-2: configuration #1 chosen from 1 choice
> [ 3.476940] hub 2-2:1.0: USB hub found
> [ 3.479146] hub 2-2:1.0: 7 ports detected
> [ 3.660188] udev: starting version 141
> [ 3.672022] usb 3-3: new low speed USB device using ohci_hcd and address 2
> [ 3.717779] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 3.733288] ACPI: Power Button (FF) [PWRF]
> [ 3.756072] input: PC Speaker as /devices/platform/pcspkr/input/input2
> [ 3.764269] hpilo 0000:01:04.2: PCI INT B -> Link[LNKX] -> GSI 10 (level, low) -> IRQ 10
> [ 3.786787] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 3.803472] ipmi message handler version 39.2
> [ 3.810775] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
> [ 3.810913] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
> [ 3.811017] k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
> [ 3.811127] k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
> [ 3.827837] shpchp 0000:40:10.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
> [ 3.827905] shpchp 0000:40:10.0: Cannot reserve MMIO region
> [ 3.827975] shpchp 0000:40:11.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
> [ 3.828037] shpchp 0000:40:11.0: Cannot reserve MMIO region
> [ 3.828108] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 3.843713] IPMI System Interface driver.
> [ 3.843761] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
> [ 3.849065] usbcore: registered new interface driver hiddev
> [ 3.853184] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.0/input/input3
> [ 3.888172] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
> [ 3.891045] usb 3-3: New USB device found, idVendor=0624, idProduct=0341
> [ 3.891103] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.891149] usb 3-3: Product: HP 336047-B21
> [ 3.891188] usb 3-3: Manufacturer: Avocent
> [ 3.891316] usb 3-3: configuration #1 chosen from 1 choice
> [ 3.901667] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.1/input/input4
> [ 3.937388] Error: Driver 'pcspkr' is already registered, aborting...
> [ 3.940117] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
> [ 3.946242] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
> [ 3.946310] IPMI kcs interface initialized
> [ 3.946360] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
> [ 3.946423] ipmi_si: duplicate interface
> [ 3.947321] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.0/input/input5
> [ 3.960092] ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 10 (level, low) -> IRQ 10
> [ 3.960158] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, slave address 0x0, irq 10
> [ 3.976097] generic-usb 0003:0624:0341.0003: input,hidraw2: USB HID v1.10 Keyboard [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input0
> [ 3.984450] input: Avocent HP 336047-B21 as /devices/pci0000:00/0000:00:02.0/usb3/3-3/3-3:1.1/input/input6
> [ 4.037055] generic-usb 0003:0624:0341.0004: input,hidraw3: USB HID v1.10 Mouse [Avocent HP 336047-B21] on usb-0000:00:02.0-3/input1
> [ 4.037144] usbcore: registered new interface driver usbhid
> [ 4.037188] usbhid: v2.6:USB HID core driver
> [ 4.044016] IRQ 10/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
> [ 4.044067] Using irq 10
> [ 4.244525] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
> [ 4.244614] IPMI kcs interface initialized
> [ 5.541780] EXT3 FS on cciss/c0d0p1, internal journal
> [ 6.490708] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
> [ 6.490770] All bugs added by David S. Miller <davem@redhat.com>
> [ 6.501484] ipmi device interface
> [ 7.581197] kjournald starting. Commit interval 5 seconds
> [ 7.581313] EXT3 FS on dm-1, internal journal
> [ 7.581393] EXT3-fs: mounted filesystem with ordered data mode.
> [ 7.601860] kjournald starting. Commit interval 5 seconds
> [ 7.601977] EXT3 FS on dm-2, internal journal
> [ 7.602055] EXT3-fs: mounted filesystem with ordered data mode.
> [ 7.633870] kjournald starting. Commit interval 5 seconds
> [ 7.634010] EXT3 FS on dm-4, internal journal
> [ 7.634084] EXT3-fs: mounted filesystem with ordered data mode.
> [ 7.641979] kjournald starting. Commit interval 5 seconds
> [ 7.652121] EXT3 FS on dm-0, internal journal
> [ 7.652201] EXT3-fs: mounted filesystem with ordered data mode.
> [ 7.752963] Adding 16777208k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:16777208k
> [ 8.216114] NET: Registered protocol family 15
> [ 8.231384] alg: No test for cipher_null (cipher_null-generic)
> [ 8.231512] alg: No test for digest_null (digest_null-generic)
> [ 8.231595] alg: No test for compress_null (compress_null-generic)
> [ 8.615567] NET: Registered protocol family 10
> [ 8.616350] lo: Disabled Privacy Extensions
> [ 8.633924] Ethernet Channel Bonding Driver: v3.5.0 (November 4, 2008)
> [ 8.633975] bonding: MII link monitoring set to 100 ms
> [ 8.672186] ADDRCONF(NETDEV_UP): bond0: link is not ready
> [ 8.675086] bonding: bond0: Adding slave eth0.
> [ 8.812032] bonding: bond0: enslaving eth0 as a backup interface with a down link.
> [ 8.814592] bonding: bond0: Adding slave eth1.
> [ 8.944136] bonding: bond0: enslaving eth1 as a backup interface with a down link.
> [ 9.368629] Initializing XFRM netlink socket
> [ 11.880402] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
> [ 11.964017] bonding: bond0: link status up for interface eth0, enabling it in 10000 ms.
> [ 12.067990] bnx2: eth1 NIC Copper Link is Up, 1000 Mbps full duplex
> [ 12.164013] bonding: bond0: link status up for interface eth1, enabling it in 10000 ms.
> [ 21.964014] bonding: bond0: link status definitely up for interface eth0.
> [ 21.964064] bonding: bond0: making interface eth0 the new active one.
> [ 21.964159] bonding: bond0: first active interface up!
> [ 21.967154] ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
> [ 22.164014] bonding: bond0: link status definitely up for interface eth1.
> [ 32.348014] bond0: no IPv6 routers present
> [ 34.821259] Fusion MPT base driver 3.04.07
> [ 34.821434] Copyright (c) 1999-2008 LSI Corporation
> [ 34.823818] Fusion MPT misc device (ioctl) driver 3.04.07
> [ 34.824041] mptctl: Registered with Fusion MPT base driver
> [ 34.824219] mptctl: /dev/mptctl @ (major,minor=10,220)
> [ 37.029775] lp: driver loaded but no devices found
> [ 37.041141] ppdev: user-space parallel port driver
> 00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
> 00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev b1)
> 00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
> 00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a4)
> 00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev a3)
> 00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
> 00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> 00:1a.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> 00:1a.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:1a.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> 00:1a.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> 00:1b.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
> 00:1b.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
> 00:1b.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
> 00:1b.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
> 01:03.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
> 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 03)
> 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 03)
> 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB controller
> 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART
> 40:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a4)
> 40:01.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev b1)
> 40:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 40:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 40:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 40:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
> 40:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12)
> 40:10.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12)
> 40:11.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8132 PCI-X Bridge (rev 12)
> 40:11.1 PIC: Advanced Micro Devices [AMD] AMD-8132 PCI-X IOAPIC (rev 12)
> 41:01.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02)
> 41:02.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5706 Gigabit Ethernet (rev 02)
> 42:02.0 RAID bus controller: Hewlett-Packard Company Smart Array P600
> CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
> 0: 45 1 0 0 1 0 0 0 XT-PIC-XT timer
> 1: 2 0 0 0 0 0 0 0 XT-PIC-XT i8042
> 2: 0 0 0 0 0 0 0 0 XT-PIC-XT cascade
> 3: 4 0 1 0 2 0 1 0 XT-PIC-XT serial
> 4: 4 0 0 0 2 0 0 0 XT-PIC-XT
> 5: 20 1 5 0 10 0 1 0 XT-PIC-XT ohci_hcd:usb3
> 7: 10336 96993 100292 100678 98680 100812 100704 101045 XT-PIC-XT
> 8: 1 0 0 0 0 0 0 0 XT-PIC-XT rtc0
> 9: 0 0 0 0 0 0 0 0 XT-PIC-XT acpi
> 10: 59622 2604 485 547 1719 324 278 251 XT-PIC-XT uhci_hcd:usb2, ipmi_si, eth0, eth1
> 11: 23514 1731 541 100 978 200 395 24 XT-PIC-XT ehci_hcd:usb1, cciss0
> 12: 3 1 0 0 0 0 0 0 XT-PIC-XT i8042
> 14: 7924 65 58 2 29 10 20 1 XT-PIC-XT ide0
> NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
> LOC: 336945 208438 267680 138102 30869 39594 481144 70316 Local timer interrupts
> RES: 13214 6855 9075 4379 12955 13070 23612 13817 Rescheduling interrupts
> CAL: 91 212 217 230 218 217 223 223 Function call interrupts
> TLB: 1986 613 559 447 2931 4132 3842 3516 TLB shootdowns
> TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
> THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
> SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
> ERR: 709540
> MIS: 0
>
> System : ProLiant DL585 G2
> Serial No. : XXXXXXXXXXXXXX
> ROM version : A07 03/11/2009
> iLo present : Yes
> Embedded NICs : 2
> NIC1 MAC: XXXXXXXXXXXXXXXXX
> NIC2 MAC: XXXXXXXXXXXXXXXXX
>
> Processor: 0
> Name : AMD Opteron
> Stepping : 3
> Speed : 2800 MHz
> Bus : 0 MHz
> Core : 2
> Thread : 2
> Socket : 1
> Level2 Cache : 2048 KBytes
> Status : Ok
>
> Processor: 1
> Name : AMD Opteron
> Stepping : 3
> Speed : 2800 MHz
> Bus : 0 MHz
> Core : 2
> Thread : 2
> Socket : 2
> Level2 Cache : 2048 KBytes
> Status : Ok
>
> Processor: 2
> Name : AMD Opteron
> Stepping : 3
> Speed : 2800 MHz
> Bus : 0 MHz
> Core : 2
> Thread : 2
> Socket : 3
> Level2 Cache : 2048 KBytes
> Status : Ok
>
> Processor: 3
> Name : AMD Opteron
> Stepping : 3
> Speed : 2800 MHz
> Bus : 0 MHz
> Core : 2
> Thread : 2
> Socket : 4
> Level2 Cache : 2048 KBytes
> Status : Ok
>
> Processor total : 4
>
> Memory installed : 16384 MBytes
> ECC supported : Yes
>
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-28 17:20 ` Alex Chiang
@ 2009-06-28 17:35 ` Stephen Frost
2009-06-28 22:32 ` Stephen Frost
1 sibling, 0 replies; 26+ messages in thread
From: Stephen Frost @ 2009-06-28 17:35 UTC (permalink / raw)
To: Alex Chiang
Cc: linux-kernel, Daniel Frazier, David Altobelli,
nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 603 bytes --]
* Alex Chiang (achiang@hp.com) wrote:
> I'm just scanning mail on the weekend, but what version of the
> BIOS are you on? Do you have the latest?
Yes, I upgraded using the 8.5 CD before trying 2.6.29 (again). I do see
a commit included in 2.6.30 which appears to address what Yinghai Lu
pointed out in his mail. I'm going to try and test 2.6.30 today or
tomorrow.
BTW, it'd be nice if the firmware update CD was either shown under every
OS, or if it was somehow at the level before the OS selection, was
annoyingly difficult to find since it wasn't under the Debian OS link.
:)
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-28 17:20 ` Alex Chiang
2009-06-28 17:35 ` Stephen Frost
@ 2009-06-28 22:32 ` Stephen Frost
2009-06-30 1:15 ` dann frazier
1 sibling, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-06-28 22:32 UTC (permalink / raw)
To: Alex Chiang
Cc: linux-kernel, Daniel Frazier, David Altobelli,
nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 278 bytes --]
* Alex Chiang (achiang@hp.com) wrote:
> I'm just scanning mail on the weekend, but what version of the
> BIOS are you on? Do you have the latest?
Check the message I just posted, it includes a dmesg under 2.6.30 (also
with noapic, since it didn't boot w/o it again).
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-28 22:32 ` Stephen Frost
@ 2009-06-30 1:15 ` dann frazier
2009-06-30 1:17 ` Stephen Frost
2009-06-30 1:18 ` Stephen Frost
0 siblings, 2 replies; 26+ messages in thread
From: dann frazier @ 2009-06-30 1:15 UTC (permalink / raw)
To: Stephen Frost
Cc: Alex Chiang, linux-kernel, David Altobelli, nagananda.chumbalkar
On Sun, Jun 28, 2009 at 06:32:58PM -0400, Stephen Frost wrote:
> * Alex Chiang (achiang@hp.com) wrote:
> > I'm just scanning mail on the weekend, but what version of the
> > BIOS are you on? Do you have the latest?
>
> Check the message I just posted, it includes a dmesg under 2.6.30 (also
> with noapic, since it didn't boot w/o it again).
fyi, I tested an HP DL585 G2 w/ the same 2.6.30 kernel build
and didn't have any problems. I am running the A07 3/11/2009 BIOS.
dmesg output follows:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009
[ 0.000000] Command line: root=/dev/disk/by-id/scsi-35000c50000d5ca0f-part1 ro console=tty1 console=ttyS1,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe4e000 (usable)
[ 0.000000] BIOS-e820: 000000007fe4e000 - 000000007fe56000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fe56000 - 000000007fe57000 (usable)
[ 0.000000] BIOS-e820: 000000007fe57000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000047ffff000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x47ffff max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000480000000 aka 18432M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fe57 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fe57000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fe57000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fe57000 @ 8000-c000
[ 0.000000] init_memory_mapping: 0000000100000000-000000047ffff000
[ 0.000000] 0100000000 - 047fe00000 page 2M
[ 0.000000] 047fe00000 - 047ffff000 page 4k
[ 0.000000] kernel direct mapping tables up to 47ffff000 @ a000-1e000
[ 0.000000] RAMDISK: 37908000 - 37fef60a
[ 0.000000] ACPI: RSDP 00000000000f4f00 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 000000007fe4ed00 00074 (v01 HP ProLiant 00000002 �\x04 0000162E)
[ 0.000000] ACPI: FACP 000000007fe4ed80 000F4 (v03 HP A07 00000002 �\x04 0000162E)
[ 0.000000] ACPI: DSDT 000000007fe4ee80 0498A (v01 HP DSDT 00000001 INTL 20030228)
[ 0.000000] ACPI: FACS 000000007fe4e100 00040
[ 0.000000] ACPI: SPCR 000000007fe4e140 00050 (v01 HP SPCRRBSU 00000001 �\x04 0000162E)
[ 0.000000] ACPI: HPET 000000007fe4e1c0 00038 (v01 HP ProLiant 00000002 �\x04 0000162E)
[ 0.000000] ACPI: SPMI 000000007fe4e200 00040 (v05 HP ProLiant 00000001 �\x04 0000162E)
[ 0.000000] ACPI: ERST 000000007fe4e240 001D0 (v01 HP ProLiant 00000001 �\x04 0000162E)
[ 0.000000] ACPI: APIC 000000007fe4e440 000C6 (v01 HP ProLiant 00000002 00000000)
[ 0.000000] ACPI: SRAT 000000007fe4e580 001A0 (v01 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: FFFF 000000007fe4e980 00176 (v01 HP ProLiant 00000001 �\x04 0000162E)
[ 0.000000] ACPI: BERT 000000007fe4eb00 00030 (v01 HP ProLiant 00000001 �\x04 0000162E)
[ 0.000000] ACPI: HEST 000000007fe4eb40 00170 (v01 HP ProLiant 00000001 �\x04 0000162E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[ 0.000000] SRAT: PXM 1 -> APIC 2 -> Node 1
[ 0.000000] SRAT: PXM 1 -> APIC 3 -> Node 1
[ 0.000000] SRAT: PXM 2 -> APIC 4 -> Node 2
[ 0.000000] SRAT: PXM 2 -> APIC 5 -> Node 2
[ 0.000000] SRAT: PXM 3 -> APIC 6 -> Node 3
[ 0.000000] SRAT: PXM 3 -> APIC 7 -> Node 3
[ 0.000000] SRAT: Node 0 PXM 0 0-a0000
[ 0.000000] SRAT: Node 0 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 0 PXM 0 100000000-180000000
[ 0.000000] SRAT: Node 1 PXM 1 180000000-280000000
[ 0.000000] SRAT: Node 2 PXM 2 280000000-380000000
[ 0.000000] SRAT: Node 3 PXM 3 380000000-480000000
[ 0.000000] NUMA: Allocated memnodemap from 19000 - 22040
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000180000000
[ 0.000000] NODE_DATA [0000000000022040 - 000000000002a03f]
[ 0.000000] bootmap [000000000002b000 - 000000000005afff] pages 30
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0180000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc]
[ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK ==> [0037908000 - 0037fef60a]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [00007da000 - 00007da114] BRK ==> [00007da000 - 00007da114]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE ==> [000000a000 - 0000019000]
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP ==> [0000019000 - 0000022040]
[ 0.000000] Bootmem setup node 1 0000000180000000-0000000280000000
[ 0.000000] NODE_DATA [0000000180000000 - 0000000180007fff]
[ 0.000000] bootmap [0000000180008000 - 0000000180027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0180000000 - 0280000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] Bootmem setup node 2 0000000280000000-0000000380000000
[ 0.000000] NODE_DATA [0000000280000000 - 0000000280007fff]
[ 0.000000] bootmap [0000000280008000 - 0000000280027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0280000000 - 0380000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] Bootmem setup node 3 0000000380000000-000000047ffff000
[ 0.000000] NODE_DATA [0000000380000000 - 0000000380007fff]
[ 0.000000] bootmap [0000000380008000 - 0000000380027fff] pages 20
[ 0.000000] (9 early reservations) ==> bootmem [0380000000 - 047ffff000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS
[ 0.000000] #3 [0037908000 - 0037fef60a] RAMDISK
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved
[ 0.000000] #5 [00007da000 - 00007da114] BRK
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE
[ 0.000000] #7 [000000a000 - 0000019000] PGTABLE
[ 0.000000] #8 [0000019000 - 0000022040] MEMNODEMAP
[ 0.000000] found SMP MP-table at [ffff8800000f4f80] f4f80
[ 0.000000] [ffffe20000000000-ffffe200053fffff] PMD -> [ffff880028200000-ffff88002b9fffff] on node 0
[ 0.000000] [ffffe20005400000-ffffe20008bfffff] PMD -> [ffff880180200000-ffff8801839fffff] on node 1
[ 0.000000] [ffffe20008c00000-ffffe2000c3fffff] PMD -> [ffff880280200000-ffff8802839fffff] on node 2
[ 0.000000] [ffffe2000c400000-ffffe2000fbfffff] PMD -> [ffff880380200000-ffff8803839fffff] on node 3
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0047ffff
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007fe4e
[ 0.000000] 0: 0x0007fe56 -> 0x0007fe57
[ 0.000000] 0: 0x00100000 -> 0x00180000
[ 0.000000] 1: 0x00180000 -> 0x00280000
[ 0.000000] 2: 0x00280000 -> 0x00380000
[ 0.000000] 3: 0x00380000 -> 0x0047ffff
[ 0.000000] On node 0 totalpages: 1048045
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1623 pages reserved
[ 0.000000] DMA zone: 2319 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 505479 pages, LIFO batch:31
[ 0.000000] Normal zone: 7168 pages used for memmap
[ 0.000000] Normal zone: 517120 pages, LIFO batch:31
[ 0.000000] On node 1 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 2 totalpages: 1048576
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034240 pages, LIFO batch:31
[ 0.000000] On node 3 totalpages: 1048575
[ 0.000000] Normal zone: 14336 pages used for memmap
[ 0.000000] Normal zone: 1034239 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x908
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xd9cf0000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xd9cf0000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xd9fd0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xd9fd0000, GSI 24-30
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xd9fe0000] gsi_base[31])
[ 0.000000] IOAPIC[2]: apic_id 10, version 0, address 0xd9fe0000, GSI 31-37
[ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xd9ff0000] gsi_base[38])
[ 0.000000] IOAPIC[3]: apic_id 11, version 0, address 0xd9ff0000, GSI 38-61
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 28)
[ 0.000000] ACPI: NMI_SRC (dfl dfl global_irq 35)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 62
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000007fe4e000 - 000000007fe56000
[ 0.000000] PM: Registered nosave memory: 000000007fe57000 - 0000000080000000
[ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
[ 0.000000] PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000
[ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:4
[ 0.000000] PERCPU: Allocated 19 4k pages, static data 76256 bytes
[ 0.000000] Built 4 zonelists in Zone order, mobility grouping on. Total pages: 4127637
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-35000c50000d5ca0f-part1 ro console=tty1 console=ttyS1,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:1118
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2612.041 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty1] enabled
[ 0.004000] console [ttyS1] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 4000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 16465692k/18874364k available (2782k kernel code, 2099276k absent, 309396k reserved, 1398k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.08 BogoMIPS (lpj=10448164)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.005541] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.019660] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.026598] Mount-cache hash table entries: 256
[ 0.027143] Initializing cgroup subsys ns
[ 0.028006] Initializing cgroup subsys cpuacct
[ 0.029010] Initializing cgroup subsys devices
[ 0.029624] Initializing cgroup subsys freezer
[ 0.030613] Initializing cgroup subsys net_cls
[ 0.032060] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.033073] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.034019] CPU 0/0x0 -> Node 0
[ 0.034970] tseg: 0000000000
[ 0.034984] CPU: Physical Processor ID: 0
[ 0.036002] CPU: Processor Core ID: 0
[ 0.037005] using C1E aware idle routine
[ 0.038636] ACPI: Core revision 20090320
[ 0.049021] Setting APIC routing to flat
[ 0.052425] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.099166] CPU0: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.112001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5224.18 BogoMIPS (lpj=10448369)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 1/0x2 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.200701] CPU1: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.208240] Booting processor 2 APIC 0x4 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5224.15 BogoMIPS (lpj=10448309)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 2/0x4 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.304616] CPU2: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.316253] Booting processor 3 APIC 0x6 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5224.18 BogoMIPS (lpj=10448365)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 3/0x6 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.408753] CPU3: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.420146] Booting processor 4 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#4
[ 0.004000] Calibrating delay using timer specific routine.. 5224.11 BogoMIPS (lpj=10448229)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 4/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 4, old 0x7040600070406, new 0x7010600070106
[ 0.512559] CPU4: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.528165] Booting processor 5 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#5
[ 0.004000] Calibrating delay using timer specific routine.. 5224.15 BogoMIPS (lpj=10448306)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 5/0x3 -> Node 1
[ 0.004000] CPU: Physical Processor ID: 1
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 5, old 0x7040600070406, new 0x7010600070106
[ 0.624721] CPU5: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.636213] Booting processor 6 APIC 0x5 ip 0x6000
[ 0.004000] Initializing CPU#6
[ 0.004000] Calibrating delay using timer specific routine.. 5224.14 BogoMIPS (lpj=10448293)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 6/0x5 -> Node 2
[ 0.004000] CPU: Physical Processor ID: 2
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 6, old 0x7040600070406, new 0x7010600070106
[ 0.728642] CPU6: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.740230] Booting processor 7 APIC 0x7 ip 0x6000
[ 0.004000] Initializing CPU#7
[ 0.004000] Calibrating delay using timer specific routine.. 5224.12 BogoMIPS (lpj=10448240)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.004000] CPU 7/0x7 -> Node 3
[ 0.004000] CPU: Physical Processor ID: 3
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 7, old 0x7040600070406, new 0x7010600070106
[ 0.836764] CPU7: Dual-Core AMD Opteron(tm) Processor 8218 stepping 03
[ 0.844584] Brought up 8 CPUs
[ 0.848005] Total of 8 processors activated (41793.13 BogoMIPS).
[ 0.852159] CPU0 attaching sched-domain:
[ 0.852162] domain 0: span 0,4 level CPU
[ 0.852165] groups: 0 4
[ 0.852168] domain 1: span 0-7 level NODE
[ 0.852170] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[ 0.852179] CPU1 attaching sched-domain:
[ 0.852181] domain 0: span 1,5 level CPU
[ 0.852183] groups: 1 5
[ 0.852186] domain 1: span 0-7 level NODE
[ 0.852188] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[ 0.852196] CPU2 attaching sched-domain:
[ 0.852198] domain 0: span 2,6 level CPU
[ 0.852200] groups: 2 6
[ 0.852203] domain 1: span 0-7 level NODE
[ 0.852205] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[ 0.852213] CPU3 attaching sched-domain:
[ 0.852215] domain 0: span 3,7 level CPU
[ 0.852217] groups: 3 7
[ 0.852220] domain 1: span 0-7 level NODE
[ 0.852222] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[ 0.852230] CPU4 attaching sched-domain:
[ 0.852232] domain 0: span 0,4 level CPU
[ 0.852234] groups: 4 0
[ 0.852237] domain 1: span 0-7 level NODE
[ 0.852239] groups: 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048)
[ 0.852247] CPU5 attaching sched-domain:
[ 0.852249] domain 0: span 1,5 level CPU
[ 0.852251] groups: 5 1
[ 0.852254] domain 1: span 0-7 level NODE
[ 0.852256] groups: 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048)
[ 0.852264] CPU6 attaching sched-domain:
[ 0.852266] domain 0: span 2,6 level CPU
[ 0.852268] groups: 6 2
[ 0.852271] domain 1: span 0-7 level NODE
[ 0.852273] groups: 2,6 (__cpu_power = 2048) 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048)
[ 0.852281] CPU7 attaching sched-domain:
[ 0.852283] domain 0: span 3,7 level CPU
[ 0.852285] groups: 7 3
[ 0.852288] domain 1: span 0-7 level NODE
[ 0.852290] groups: 3,7 (__cpu_power = 2048) 0,4 (__cpu_power = 2048) 1,5 (__cpu_power = 2048) 2,6 (__cpu_power = 2048)
[ 0.852513] net_namespace: 1936 bytes
[ 0.856066] Booting paravirtualized kernel on bare hardware
[ 0.860133] regulator: core version 0.5
[ 0.863467] NET: Registered protocol family 16
[ 0.864042] node 0 link 1: io port [1000, 2fff]
[ 0.864042] node 1 link 2: io port [3000, ffff]
[ 0.864042] TOM: 0000000080000000 aka 2048M
[ 0.868005] node 0 link 1: mmio [d0000000, d9efffff]
[ 0.868007] node 1 link 2: mmio [d9f00000, dfefffff]
[ 0.868010] node 0 link 1: mmio [e0000000, e3ffffff]
[ 0.868012] node 1 link 2: mmio [e4000000, e7ffffff]
[ 0.868015] node 0 link 1: mmio [a0000, bffff]
[ 0.868017] TOM2: 0000000480000000 aka 18432M
[ 0.872004] bus: [00,3f] on node 0 link 1
[ 0.872006] bus: 00 index 0 io port: [0, 2fff]
[ 0.872008] bus: 00 index 1 mmio: [80000000, d9efffff]
[ 0.872010] bus: 00 index 2 mmio: [dff00000, e3ffffff]
[ 0.872012] bus: 00 index 3 mmio: [a0000, bffff]
[ 0.872013] bus: 00 index 4 mmio: [e8000000, ffffffff]
[ 0.872015] bus: 00 index 5 mmio: [480000000, fcffffffff]
[ 0.872017] bus: [40,7f] on node 1 link 2
[ 0.872019] bus: 40 index 0 io port: [3000, ffff]
[ 0.872021] bus: 40 index 1 mmio: [d9f00000, dfefffff]
[ 0.872023] bus: 40 index 2 mmio: [e4000000, e7ffffff]
[ 0.872034] ACPI: bus type pci registered
[ 0.876040] PCI: Using configuration type 1 for base access
[ 0.880009] PCI: HP ProLiant DL585 G2 detected, enabling pci=bfsort.
[ 0.888289] bio: create slab <bio-0> at 0
[ 0.892416] ACPI: EC: Look up EC in DSDT
[ 0.898484] ACPI: SSDT 000000007fe58000 009BC (v02 HP PNOWSSDT 00000002 HP 00000001)
[ 0.904156] ACPI: Interpreter enabled
[ 0.908005] ACPI: (supports S0 S4 S5)
[ 0.913322] ACPI: Using IOAPIC for interrupt routing
[ 0.924208] ACPI: No dock devices found.
[ 0.928018] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.932094] pci 0000:00:02.0: reg 10 32bit mmio: [0xd9ce0000-0xd9ce0fff]
[ 0.932107] pci 0000:00:02.0: supports D1 D2
[ 0.932109] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.936005] pci 0000:00:02.0: PME# disabled
[ 0.940017] pci 0000:00:02.1: reg 10 32bit mmio: [0xd9cd0000-0xd9cd00ff]
[ 0.940034] pci 0000:00:02.1: supports D1 D2
[ 0.940036] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.944004] pci 0000:00:02.1: PME# disabled
[ 0.948033] pci 0000:00:06.0: reg 20 io port: [0x500-0x50f]
[ 0.948074] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.952005] pci 0000:00:0c.0: PME# disabled
[ 0.956026] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.960004] pci 0000:00:0d.0: PME# disabled
[ 0.964023] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.968005] pci 0000:00:0e.0: PME# disabled
[ 0.972258] pci 0000:01:03.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.972263] pci 0000:01:03.0: reg 14 io port: [0x1000-0x10ff]
[ 0.972268] pci 0000:01:03.0: reg 18 32bit mmio: [0xd9ef0000-0xd9efffff]
[ 0.972281] pci 0000:01:03.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.972294] pci 0000:01:03.0: supports D1 D2
[ 0.972317] pci 0000:01:04.0: reg 10 io port: [0x2800-0x28ff]
[ 0.972322] pci 0000:01:04.0: reg 14 32bit mmio: [0xd9ee0000-0xd9ee01ff]
[ 0.972348] pci 0000:01:04.0: PME# supported from D0 D3hot D3cold
[ 0.976005] pci 0000:01:04.0: PME# disabled
[ 0.980029] pci 0000:01:04.2: reg 10 io port: [0x1400-0x14ff]
[ 0.980035] pci 0000:01:04.2: reg 14 32bit mmio: [0xd9ed0000-0xd9ed07ff]
[ 0.980041] pci 0000:01:04.2: reg 18 32bit mmio: [0xd9ec0000-0xd9ec3fff]
[ 0.980047] pci 0000:01:04.2: reg 1c 32bit mmio: [0xd9e00000-0xd9e7ffff]
[ 0.980059] pci 0000:01:04.2: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.980073] pci 0000:01:04.2: PME# supported from D0 D3hot D3cold
[ 0.984006] pci 0000:01:04.2: PME# disabled
[ 0.988042] pci 0000:01:04.4: reg 20 io port: [0x1800-0x181f]
[ 0.988063] pci 0000:01:04.4: PME# supported from D0 D3hot D3cold
[ 0.992005] pci 0000:01:04.4: PME# disabled
[ 0.996027] pci 0000:01:04.6: reg 10 32bit mmio: [0xd9df0000-0xd9df00ff]
[ 0.996055] pci 0000:01:04.6: PME# supported from D0 D3hot D3cold
[ 1.000006] pci 0000:01:04.6: PME# disabled
[ 1.004029] pci 0000:00:09.0: transparent bridge
[ 1.008004] pci 0000:00:09.0: bridge io port: [0x1000-0x2fff]
[ 1.008007] pci 0000:00:09.0: bridge 32bit mmio: [0xd9d00000-0xd9efffff]
[ 1.008010] pci 0000:00:09.0: bridge 32bit mmio pref: [0xd0000000-0xd7ffffff]
[ 1.008115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.008202] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
[ 1.008317] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE0._PRT]
[ 1.008428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE1._PRT]
[ 1.008537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.CPE2._PRT]
[ 1.012209] ACPI: PCI Root Bridge [PCI1] (0000:40)
[ 1.016128] pci 0000:40:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.020005] pci 0000:40:0b.0: PME# disabled
[ 1.024036] pci 0000:40:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.028004] pci 0000:40:0c.0: PME# disabled
[ 1.032035] pci 0000:40:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.036006] pci 0000:40:0d.0: PME# disabled
[ 1.040035] pci 0000:40:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.044004] pci 0000:40:0e.0: PME# disabled
[ 1.048035] pci 0000:40:10.0: Enabling HT MSI Mapping
[ 1.052069] pci 0000:40:11.0: Enabling HT MSI Mapping
[ 1.056207] pci 0000:41:01.0: reg 10 64bit mmio: [0xdc000000-0xddffffff]
[ 1.056220] pci 0000:41:01.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.056234] pci 0000:41:01.0: PME# supported from D3hot D3cold
[ 1.060005] pci 0000:41:01.0: PME# disabled
[ 1.064029] pci 0000:41:02.0: reg 10 64bit mmio: [0xda000000-0xdbffffff]
[ 1.064042] pci 0000:41:02.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.064056] pci 0000:41:02.0: PME# supported from D3hot D3cold
[ 1.068005] pci 0000:41:02.0: PME# disabled
[ 1.072027] pci 0000:40:10.0: bridge 32bit mmio: [0xda000000-0xddffffff]
[ 1.072058] pci 0000:42:01.0: reg 10 io port: [0x3000-0x30ff]
[ 1.072064] pci 0000:42:01.0: reg 14 64bit mmio: [0xdfef0000-0xdfef3fff]
[ 1.072070] pci 0000:42:01.0: reg 1c 64bit mmio: [0xdfee0000-0xdfeeffff]
[ 1.072077] pci 0000:42:01.0: reg 30 32bit mmio: [0x000000-0x1fffff]
[ 1.072091] pci 0000:42:01.0: supports D1 D2
[ 1.072116] pci 0000:40:11.0: bridge io port: [0x3000-0x3fff]
[ 1.072119] pci 0000:40:11.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 1.072139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGA._PRT]
[ 1.072211] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.BRGB._PRT]
[ 1.072380] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE0._PRT]
[ 1.072504] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE1._PRT]
[ 1.072629] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE2._PRT]
[ 1.072747] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.IPE3._PRT]
[ 1.076095] ACPI: PCI Interrupt Link [LNKW] (IRQs 16) *0, disabled.
[ 1.084770] ACPI: PCI Interrupt Link [LNKX] (IRQs 17) *0, disabled.
[ 1.093245] ACPI: PCI Interrupt Link [LNKY] (IRQs 18) *0, disabled.
[ 1.100319] ACPI: PCI Interrupt Link [LNKZ] (IRQs 19) *0, disabled.
[ 1.108318] ACPI: PCI Interrupt Link [LNU0] (IRQs 22) *5
[ 1.116204] ACPI: PCI Interrupt Link [LNU2] (IRQs 23) *10
[ 1.121362] ACPI: PCI Interrupt Link [LNKA] (IRQs 54) *0, disabled.
[ 1.129221] ACPI: PCI Interrupt Link [LNKB] (IRQs 55) *0, disabled.
[ 1.136322] ACPI: PCI Interrupt Link [LNKC] (IRQs 56) *0, disabled.
[ 1.144913] ACPI: PCI Interrupt Link [LNKD] (IRQs 57) *0, disabled.
[ 1.156163] usbcore: registered new interface driver usbfs
[ 1.160027] usbcore: registered new interface driver hub
[ 1.164021] usbcore: registered new device driver usb
[ 1.168025] PCI: Using ACPI for IRQ routing
[ 1.172132] Expanded resource reserved due to conflict with PCI Bus #00
[ 1.176004] Expanded resource reserved due to conflict with PCI Bus #00
[ 1.192120] PCI-DMA: Disabling AGP.
[ 1.196136] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.200004] PCI-DMA: using GART IOMMU.
[ 1.204007] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.208716] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 1.216294] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 1.240013] Switched to high resolution mode on CPU 0
[ 1.240534] Switched to high resolution mode on CPU 4
[ 1.240651] Switched to high resolution mode on CPU 2
[ 1.240657] Switched to high resolution mode on CPU 6
[ 1.240671] Switched to high resolution mode on CPU 1
[ 1.240680] Switched to high resolution mode on CPU 5
[ 1.240776] Switched to high resolution mode on CPU 3
[ 1.240786] Switched to high resolution mode on CPU 7
[ 1.252009] pnp: PnP ACPI init
[ 1.259945] ACPI: bus type pnp registered
[ 1.275962] pnp: PnP ACPI: found 16 devices
[ 1.300061] ACPI: ACPI bus type pnp unregistered
[ 1.323407] system 00:01: ioport range 0x408-0x40f has been reserved
[ 1.327729] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 1.352071] system 00:01: ioport range 0x700-0x73f has been reserved
[ 1.366071] system 00:01: ioport range 0x800-0x8fe has been reserved
[ 1.392146] system 00:01: ioport range 0x900-0x9fe has been reserved
[ 1.401416] system 00:01: ioport range 0x9ff-0x9ff has been reserved
[ 1.414069] system 00:01: ioport range 0xa00-0xafe has been reserved
[ 1.419672] system 00:01: ioport range 0xaff-0xaff has been reserved
[ 1.447071] system 00:01: ioport range 0xb00-0xbfe has been reserved
[ 1.459083] system 00:01: ioport range 0xbff-0xbff has been reserved
[ 1.463812] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 1.488103] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 1.502073] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
[ 1.512485] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 1.526071] system 00:01: ioport range 0xca0-0xca1 has been reserved
[ 1.539968] system 00:01: ioport range 0xca4-0xca5 has been reserved
[ 1.545651] system 00:01: ioport range 0xc00-0xc03 has been reserved
[ 1.562813] system 00:01: ioport range 0x2f8-0x2ff has been reserved
[ 1.587064] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 1.597089] pci 0000:00:09.0: IO window: 0x1000-0x2fff
[ 1.610647] pci 0000:00:09.0: MEM window: 0xd9d00000-0xd9efffff
[ 1.621088] pci 0000:00:09.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
[ 1.631228] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:08
[ 1.640245] pci 0000:00:0c.0: IO window: disabled
[ 1.656076] pci 0000:00:0c.0: MEM window: disabled
[ 1.673086] pci 0000:00:0c.0: PREFETCH window: disabled
[ 1.683910] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05
[ 1.707095] pci 0000:00:0d.0: IO window: disabled
[ 1.717532] pci 0000:00:0d.0: MEM window: disabled
[ 1.728296] pci 0000:00:0d.0: PREFETCH window: disabled
[ 1.737849] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 1.748115] pci 0000:00:0e.0: IO window: disabled
[ 1.760376] pci 0000:00:0e.0: MEM window: disabled
[ 1.777083] pci 0000:00:0e.0: PREFETCH window: disabled
[ 1.796093] pci 0000:00:09.0: setting latency timer to 64
[ 1.796097] pci 0000:00:0c.0: setting latency timer to 64
[ 1.796101] pci 0000:00:0d.0: setting latency timer to 64
[ 1.796104] pci 0000:00:0e.0: setting latency timer to 64
[ 1.796111] pci 0000:40:0b.0: PCI bridge, secondary bus 0000:4f
[ 1.806093] pci 0000:40:0b.0: IO window: disabled
[ 1.825905] pci 0000:40:0b.0: MEM window: disabled
[ 1.842125] pci 0000:40:0b.0: PREFETCH window: disabled
[ 1.852091] pci 0000:40:0c.0: PCI bridge, secondary bus 0000:4c
[ 1.857471] pci 0000:40:0c.0: IO window: disabled
[ 1.875603] pci 0000:40:0c.0: MEM window: disabled
[ 1.891130] pci 0000:40:0c.0: PREFETCH window: disabled
[ 1.899087] pci 0000:40:0d.0: PCI bridge, secondary bus 0000:49
[ 1.911128] pci 0000:40:0d.0: IO window: disabled
[ 1.928100] pci 0000:40:0d.0: MEM window: disabled
[ 1.957127] pci 0000:40:0d.0: PREFETCH window: disabled
[ 1.976079] pci 0000:40:0e.0: PCI bridge, secondary bus 0000:46
[ 2.000745] pci 0000:40:0e.0: IO window: disabled
[ 2.016108] pci 0000:40:0e.0: MEM window: disabled
[ 2.021138] pci 0000:40:0e.0: PREFETCH window: disabled
[ 2.036499] pci 0000:40:10.0: PCI bridge, secondary bus 0000:41
[ 2.046327] pci 0000:40:10.0: IO window: disabled
[ 2.052081] pci 0000:40:10.0: MEM window: 0xda000000-0xddffffff
[ 2.075985] pci 0000:40:10.0: PREFETCH window: 0x000000d9f00000-0x000000d9ffffff
[ 2.107248] pci 0000:40:11.0: PCI bridge, secondary bus 0000:42
[ 2.123539] pci 0000:40:11.0: IO window: 0x3000-0x3fff
[ 2.130107] pci 0000:40:11.0: MEM window: 0xdfe00000-0xdfefffff
[ 2.134652] pci 0000:40:11.0: PREFETCH window: 0x000000de000000-0x000000de1fffff
[ 2.153384] pci 0000:40:0b.0: setting latency timer to 64
[ 2.153389] pci 0000:40:0c.0: setting latency timer to 64
[ 2.153393] pci 0000:40:0d.0: setting latency timer to 64
[ 2.153398] pci 0000:40:0e.0: setting latency timer to 64
[ 2.153405] pci_bus 0000:00: resource 0 io: [0x00-0x2fff]
[ 2.153408] pci_bus 0000:00: resource 1 mem: [0x80000000-0xd9efffff]
[ 2.153410] pci_bus 0000:00: resource 2 mem: [0xdff00000-0xe3ffffff]
[ 2.153412] pci_bus 0000:00: resource 3 mem: [0x0a0000-0x0bffff]
[ 2.153414] pci_bus 0000:00: resource 4 mem: [0xe8000000-0xffffffff]
[ 2.153416] pci_bus 0000:00: resource 5 mem: [0x480000000-0xfcffffffff]
[ 2.153419] pci_bus 0000:01: resource 0 io: [0x1000-0x2fff]
[ 2.153421] pci_bus 0000:01: resource 1 mem: [0xd9d00000-0xd9efffff]
[ 2.153423] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xd7ffffff]
[ 2.153426] pci_bus 0000:01: resource 3 io: [0x00-0x2fff]
[ 2.153428] pci_bus 0000:01: resource 4 mem: [0x80000000-0xd9efffff]
[ 2.153430] pci_bus 0000:01: resource 5 mem: [0xdff00000-0xe3ffffff]
[ 2.153432] pci_bus 0000:01: resource 6 mem: [0x0a0000-0x0bffff]
[ 2.153434] pci_bus 0000:01: resource 7 mem: [0xe8000000-0xffffffff]
[ 2.153436] pci_bus 0000:01: resource 8 mem: [0x480000000-0xfcffffffff]
[ 2.153439] pci_bus 0000:40: resource 0 io: [0x3000-0xffff]
[ 2.153442] pci_bus 0000:40: resource 1 mem: [0xd9f00000-0xdfefffff]
[ 2.153444] pci_bus 0000:40: resource 2 mem: [0xe4000000-0xe7ffffff]
[ 2.153447] pci_bus 0000:41: resource 1 mem: [0xda000000-0xddffffff]
[ 2.153449] pci_bus 0000:41: resource 2 pref mem [0xd9f00000-0xd9ffffff]
[ 2.153451] pci_bus 0000:42: resource 0 io: [0x3000-0x3fff]
[ 2.153453] pci_bus 0000:42: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 2.153456] pci_bus 0000:42: resource 2 pref mem [0xde000000-0xde1fffff]
[ 2.153676] NET: Registered protocol family 2
[ 2.216591] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 2.240910] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 2.268092] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.284775] TCP: Hash tables configured (established 524288 bind 65536)
[ 2.290779] TCP reno registered
[ 2.320308] NET: Registered protocol family 1
[ 2.335011] Trying to unpack rootfs image as initramfs...
[ 2.559899] Freeing initrd memory: 7069k freed
[ 2.571069] audit: initializing netlink socket (disabled)
[ 2.580181] type=2000 audit(1246298742.580:1): initialized
[ 2.589988] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.608256] VFS: Disk quotas dquot_6.5.2
[ 2.618182] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.630420] msgmni has been set to 32173
[ 2.635955] alg: No test for stdrng (krng)
[ 2.648339] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.661790] io scheduler noop registered
[ 2.668389] io scheduler anticipatory registered
[ 2.682139] io scheduler deadline registered
[ 2.688765] io scheduler cfq registered (default)
[ 2.724026] pci 0000:00:0c.0: Found enabled HT MSI Mapping
[ 2.743145] pci 0000:00:0d.0: Found enabled HT MSI Mapping
[ 2.764138] pci 0000:00:0e.0: Found enabled HT MSI Mapping
[ 2.786649] pci 0000:01:03.0: Boot video device
[ 2.786667] pci 0000:01:04.4: HCRESET not completed yet!
[ 2.811601] pci 0000:40:0b.0: Found enabled HT MSI Mapping
[ 2.820927] pci 0000:40:0c.0: Found enabled HT MSI Mapping
[ 2.836474] pci 0000:40:0d.0: Found enabled HT MSI Mapping
[ 2.857123] pci 0000:40:0e.0: Found enabled HT MSI Mapping
[ 2.885790] alloc irq_desc for 62 on cpu 0 node 0
[ 2.885793] alloc kstat_irqs on cpu 0 node 0
[ 2.885803] pcieport-driver 0000:00:0c.0: irq 62 for MSI/MSI-X
[ 2.885809] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 2.885946] alloc irq_desc for 63 on cpu 0 node 0
[ 2.885948] alloc kstat_irqs on cpu 0 node 0
[ 2.885954] pcieport-driver 0000:00:0d.0: irq 63 for MSI/MSI-X
[ 2.885958] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 2.886074] alloc irq_desc for 64 on cpu 0 node 0
[ 2.886076] alloc kstat_irqs on cpu 0 node 0
[ 2.886082] pcieport-driver 0000:00:0e.0: irq 64 for MSI/MSI-X
[ 2.886086] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 2.886244] alloc irq_desc for 65 on cpu 0 node 0
[ 2.886247] alloc kstat_irqs on cpu 0 node 0
[ 2.886262] pcieport-driver 0000:40:0b.0: irq 65 for MSI/MSI-X
[ 2.886270] pcieport-driver 0000:40:0b.0: setting latency timer to 64
[ 2.886467] alloc irq_desc for 66 on cpu 0 node 0
[ 2.886469] alloc kstat_irqs on cpu 0 node 0
[ 2.886476] pcieport-driver 0000:40:0c.0: irq 66 for MSI/MSI-X
[ 2.886482] pcieport-driver 0000:40:0c.0: setting latency timer to 64
[ 2.886622] alloc irq_desc for 67 on cpu 0 node 0
[ 2.886624] alloc kstat_irqs on cpu 0 node 0
[ 2.886630] pcieport-driver 0000:40:0d.0: irq 67 for MSI/MSI-X
[ 2.886636] pcieport-driver 0000:40:0d.0: setting latency timer to 64
[ 2.886776] alloc irq_desc for 68 on cpu 0 node 0
[ 2.886778] alloc kstat_irqs on cpu 0 node 0
[ 2.886784] pcieport-driver 0000:40:0e.0: irq 68 for MSI/MSI-X
[ 2.886790] pcieport-driver 0000:40:0e.0: setting latency timer to 64
[ 2.891850] Linux agpgart interface v0.103
[ 2.905820] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.919168] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.933852] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 2.944558] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.954750] brd: module loaded
[ 2.965735] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.987452] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 3.025405] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.032848] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.044874] mice: PS/2 mouse device common for all mice
[ 3.050242] rtc_cmos 00:0a: RTC can wake from S4
[ 3.070847] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 3.104357] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 3.131198] cpuidle: using governor ladder
[ 3.151453] cpuidle: using governor menu
[ 3.167598] No iBFT detected.
[ 3.172537] TCP cubic registered
[ 3.188654] NET: Registered protocol family 10
[ 3.191750] lo: Disabled Privacy Extensions
[ 3.201566] Mobile IPv6
[ 3.203098] NET: Registered protocol family 17
[ 3.231423] registered taskstats version 1
[ 3.242452] rtc_cmos 00:0a: setting system clock to 2009-06-29 18:05:46 UTC (1246298746)
[ 3.266278] Freeing unused kernel memory: 560k freed
[ 3.284574] Write protecting the kernel read-only data: 3792k
[ 3.490537] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.492146] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.499753] Uniform Multi-Platform E-IDE driver
[ 3.508979] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.579988] SCSI subsystem initialized
[ 3.585360] ACPI: PCI Interrupt Link [LNU2] enabled at IRQ 23
[ 3.585365] alloc irq_desc for 23 on cpu 0 node 0
[ 3.585367] alloc kstat_irqs on cpu 0 node 0
[ 3.585377] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LNU2] -> GSI 23 (level, high) -> IRQ 23
[ 3.639185] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.639188] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.646269] Fusion MPT base driver 3.04.07
[ 3.646272] Copyright (c) 1999-2008 LSI Corporation
[ 3.652981] Fusion MPT SAS Host driver 3.04.07
[ 3.677142] alloc irq_desc for 24 on cpu 0 node 0
[ 3.677146] alloc kstat_irqs on cpu 0 node 0
[ 3.677160] mptsas 0000:42:01.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 3.744225] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.1 (May 6, 2009)
[ 3.744322] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.744364] ehci_hcd 0000:00:02.1: debug port 1
[ 3.744367] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.744385] ehci_hcd 0000:00:02.1: irq 23, io mem 0xd9cd0000
[ 3.744610] ACPI: PCI Interrupt Link [LNKX] enabled at IRQ 17
[ 3.744612] alloc irq_desc for 17 on cpu 0 node 0
[ 3.744614] alloc kstat_irqs on cpu 0 node 0
[ 3.744619] uhci_hcd 0000:01:04.4: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
[ 3.744628] uhci_hcd 0000:01:04.4: UHCI Host Controller
[ 3.744681] uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 2
[ 3.744693] uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
[ 3.744704] uhci_hcd 0000:01:04.4: HCRESET not completed yet!
[ 3.744722] uhci_hcd 0000:01:04.4: irq 17, io base 0x00001800
[ 3.744769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.744771] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.744774] usb usb2: Product: UHCI Host Controller
[ 3.744775] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 3.744777] usb usb2: SerialNumber: 0000:01:04.4
[ 3.744824] usb usb2: configuration #1 chosen from 1 choice
[ 3.744852] hub 2-0:1.0: USB hub found
[ 3.744860] hub 2-0:1.0: 2 ports detected
[ 3.756014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 3.756041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.756044] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.756046] usb usb1: Product: EHCI Host Controller
[ 3.756047] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[ 3.756049] usb usb1: SerialNumber: 0000:00:02.1
[ 3.756121] usb usb1: configuration #1 chosen from 1 choice
[ 3.756151] hub 1-0:1.0: USB hub found
[ 3.756161] hub 1-0:1.0: 10 ports detected
[ 3.756681] amd74xx 0000:00:06.0: UDMA133 controller
[ 3.756684] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0053 rev 0xa3)
[ 3.756698] amd74xx 0000:00:06.0: IDE port disabled
[ 3.756708] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[ 3.756714] ide0: BM-DMA at 0x0500-0x0507
[ 3.756720] Probing IDE interface ide0...
[ 4.057262] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 4.205037] usb 2-1: New USB device found, idVendor=03f0, idProduct=1027
[ 4.205041] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.205043] usb 2-1: Product: Virtual Keyboard
[ 4.205045] usb 2-1: Manufacturer: HP
[ 4.205150] usb 2-1: configuration #1 chosen from 1 choice
[ 4.223553] usbcore: registered new interface driver hiddev
[ 4.228111] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.0/input/input1
[ 4.228176] generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1/input0
[ 4.234646] input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:09.0/0000:01:04.4/usb2/2-1/2-1:1.1/input/input2
[ 4.234715] generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1/input1
[ 4.234743] usbcore: registered new interface driver usbhid
[ 4.234746] usbhid: v2.6:USB HID core driver
[ 4.325764] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 4.472993] usb 2-2: New USB device found, idVendor=03f0, idProduct=1327
[ 4.472996] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.472998] usb 2-2: Product: Virtual Hub
[ 4.472999] usb 2-2: Manufacturer: HP
[ 4.473114] usb 2-2: configuration #1 chosen from 1 choice
[ 4.478403] hub 2-2:1.0: USB hub found
[ 4.480601] hub 2-2:1.0: 7 ports detected
[ 4.496121] hda: TEAC DV-W28ECW, ATAPI CD/DVD-ROM drive
[ 4.609765] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 4.742159] usb 1-6: New USB device found, idVendor=04b4, idProduct=6560
[ 4.742161] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.742233] usb 1-6: configuration #1 chosen from 1 choice
[ 4.742793] hub 1-6:1.0: USB hub found
[ 4.743222] hub 1-6:1.0: 4 ports detected
[ 4.812274] alloc irq_desc for 31 on cpu 0 node 0
[ 4.812277] alloc kstat_irqs on cpu 0 node 0
[ 4.812283] bnx2 0000:41:01.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 4.832125] mptbase: ioc0: Initiating bringup
[ 5.012165] usb 1-6.3: new full speed USB device using ehci_hcd and address 3
[ 5.121781] usb 1-6.3: New USB device found, idVendor=0e34, idProduct=0204
[ 5.142889] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.158573] usb 1-6.3: Product: iPort/USB I2C Host Adapter
[ 5.168062] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.169847] usb 1-6.3: Manufacturer: Silicon Labs
[ 5.169888] hda: MWDMA2 mode selected
[ 5.172757] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.173191] ACPI: PCI Interrupt Link [LNU0] enabled at IRQ 22
[ 5.173195] alloc irq_desc for 22 on cpu 0 node 0
[ 5.173197] alloc kstat_irqs on cpu 0 node 0
[ 5.173205] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNU0] -> GSI 22 (level, high) -> IRQ 22
[ 5.215509] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 5.215513] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 5.215519] usb 1-6.3: SerialNumber: 0001248
[ 5.215628] usb 1-6.3: configuration #1 chosen from 1 choice
[ 5.266292] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 5.273376] ohci_hcd 0000:00:02.0: irq 22, io mem 0xd9ce0000
[ 5.344290] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
[ 5.346011] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.346013] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.346015] usb usb3: Product: OHCI Host Controller
[ 5.346017] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 5.346018] usb usb3: SerialNumber: 0000:00:02.0
[ 5.346073] usb usb3: configuration #1 chosen from 1 choice
[ 5.346106] hub 3-0:1.0: USB hub found
[ 5.346114] hub 3-0:1.0: 10 ports detected
[ 5.360683] libata version 3.00 loaded.
[ 5.374863] ide-cd driver 5.00
[ 5.377693] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
[ 5.377700] Uniform CD-ROM driver Revision: 3.20
[ 5.486328] bnx2 0000:41:01.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
[ 5.520834] eth0: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem dc000000, IRQ 31, node addr 00:1b:78:be:d1:50
[ 5.539237] alloc irq_desc for 32 on cpu 0 node 0
[ 5.539241] alloc kstat_irqs on cpu 0 node 0
[ 5.539253] bnx2 0000:41:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 5.768011] ioc0: LSISAS1068 B0: Capabilities={Initiator}
[ 5.780002] alloc irq_desc for 69 on cpu 0 node 0
[ 5.780005] alloc kstat_irqs on cpu 0 node 0
[ 5.780014] mptsas 0000:42:01.0: irq 69 for MSI/MSI-X
[ 5.780020] mptbase: ioc0: PCI-MSI enabled
[ 6.044014] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-mips-06-4.6.16.fw
[ 6.059125] bnx2 0000:41:02.0: firmware: requesting bnx2/bnx2-rv2p-06-4.6.16.fw
[ 6.071810] eth1: Broadcom NetXtreme II BCM5706 1000Base-T (A2) PCI-X 64-bit 100MHz found at mem da000000, IRQ 32, node addr 00:1b:78:be:d1:52
[ 29.222937] scsi0 : ioc0: LSISAS1068 B0, FwRev=01142100h, Ports=1, MaxQ=511, IRQ=69
[ 29.296633] scsi 0:0:0:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5
[ 29.314866] scsi 0:0:1:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5
[ 29.342360] scsi 0:0:2:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5
[ 29.363867] scsi 0:0:3:0: Direct-Access HP DG036A9BB6 HPD0 PQ: 0 ANSI: 5
[ 29.411386] scsi 0:0:4:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5
[ 29.441924] scsi 0:0:5:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5
[ 29.457296] scsi 0:0:6:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5
[ 29.495441] scsi 0:0:7:0: Direct-Access HP DG072A8B54 HPD7 PQ: 0 ANSI: 5
[ 29.556254] Driver 'sd' needs updating - please use bus_type methods
[ 29.664676] sd 0:0:1:0: [sdb] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB)
[ 29.666802] sd 0:0:3:0: [sdd] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB)
[ 29.697036] sd 0:0:4:0: [sde] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 29.728553] sd 0:0:5:0: [sdf] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 29.728558] sd 0:0:3:0: [sdd] Write Protect is off
[ 29.728561] sd 0:0:3:0: [sdd] Mode Sense: cf 00 10 08
[ 29.728575] sd 0:0:2:0: [sdc] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB)
[ 29.730641] sd 0:0:6:0: [sdg] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 29.730938] sd 0:0:7:0: [sdh] 143374738 512-byte hardware sectors: (73.4 GB/68.3 GiB)
[ 29.731696] sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 29.731779] sd 0:0:5:0: [sdf] Write Protect is off
[ 29.731782] sd 0:0:5:0: [sdf] Mode Sense: db 00 10 08
[ 29.731834] sd 0:0:6:0: [sdg] Write Protect is off
[ 29.731836] sd 0:0:6:0: [sdg] Mode Sense: db 00 10 08
[ 29.732090] sd 0:0:2:0: [sdc] Write Protect is off
[ 29.732093] sd 0:0:2:0: [sdc] Mode Sense: cf 00 10 08
[ 29.732138] sd 0:0:7:0: [sdh] Write Protect is off
[ 29.732140] sd 0:0:7:0: [sdh] Mode Sense: db 00 10 08
[ 29.753976] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 29.754053] sd 0:0:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 29.754085] sd 0:0:6:0: [sdg] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 29.754119] sd 0:0:7:0: [sdh] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 29.812019] sd 0:0:1:0: [sdb] Write Protect is off
[ 29.812022] sd 0:0:1:0: [sdb] Mode Sense: cf 00 10 08
[ 29.860582] sd 0:0:0:0: [sda] 71132960 512-byte hardware sectors: (36.4 GB/33.9 GiB)
[ 29.860701] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 29.880227] sdd:<5>sd 0:0:0:0: [sda] Write Protect is off
[ 29.880306] sd 0:0:0:0: [sda] Mode Sense: cf 00 10 08
[ 29.883565] sdc:<5>sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 29.883719] sdf:<6> sdh:<6> sdg: sdf1 sdf2 < sdh1
[ 30.071769] sdf5<5>sd 0:0:4:0: [sde] Write Protect is off
[ 30.072981] sd 0:0:4:0: [sde] Mode Sense: db 00 10 08
[ 30.074235] sd 0:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 30.105095] >
[ 30.113641] sd 0:0:5:0: [sdf] Attached SCSI disk
[ 30.113740] unknown partition table
[ 30.131057] unknown partition table
[ 30.131094] sd 0:0:2:0: [sdc] Attached SCSI disk
[ 30.154406] unknown partition table
[ 30.154484] sd 0:0:6:0: [sdg] Attached SCSI disk
[ 30.180268] sdb:<5>sd 0:0:3:0: [sdd] Attached SCSI disk
[ 30.184435] sda:<6> sde:<5>sd 0:0:7:0: [sdh] Attached SCSI disk
[ 30.192642] unknown partition table
[ 30.198842] sd 0:0:4:0: [sde] Attached SCSI disk
[ 30.202296] unknown partition table
[ 30.220308] unknown partition table
[ 30.230477] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 30.230487] sd 0:0:0:0: [sda] Attached SCSI disk
[ 30.549750] kjournald starting. Commit interval 5 seconds
[ 30.549761] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.563227] udevd version 125 started
[ 31.783207] processor ACPI_CPU:00: registered as cooling_device0
[ 31.817509] processor ACPI_CPU:01: registered as cooling_device1
[ 31.840427] processor ACPI_CPU:02: registered as cooling_device2
[ 31.864447] processor ACPI_CPU:03: registered as cooling_device3
[ 31.881888] processor ACPI_CPU:04: registered as cooling_device4
[ 31.892415] processor ACPI_CPU:05: registered as cooling_device5
[ 31.920656] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 31.929392] ACPI: Power Button [PWRF]
[ 32.059445] processor ACPI_CPU:06: registered as cooling_device6
[ 32.072447] processor ACPI_CPU:07: registered as cooling_device7
[ 32.100727] ACPI: PCI Interrupt Link [LNKW] enabled at IRQ 16
[ 32.106751] alloc irq_desc for 16 on cpu 0 node 0
[ 32.106753] alloc kstat_irqs on cpu 0 node 0
[ 32.106765] hpwdt 0000:01:04.0: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
[ 32.120410] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.140487] hpwdt: New timer passed in is 30 seconds.
[ 32.140579] hp Watchdog Timer Driver: 1.01, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF).
[ 32.172730] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 32.177669] ipmi message handler version 39.2
[ 32.197749] hpilo 0000:01:04.2: PCI INT B -> Link[LNKX] -> GSI 17 (level, high) -> IRQ 17
[ 32.226048] k8temp 0000:00:19.3: Temperature readouts might be wrong - check erratum #141
[ 32.235396] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 32.258757] IPMI System Interface driver.
[ 32.258763] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
[ 32.338247] k8temp 0000:00:1a.3: Temperature readouts might be wrong - check erratum #141
[ 32.368614] k8temp 0000:00:1b.3: Temperature readouts might be wrong - check erratum #141
[ 32.399510] shpchp 0000:40:10.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
[ 32.442486] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 32.442497] IPMI kcs interface initialized
[ 32.442515] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 32.442517] ipmi_si: duplicate interface
[ 32.459875] Error: Driver 'pcspkr' is already registered, aborting...
[ 32.501944] shpchp 0000:40:10.0: Cannot reserve MMIO region
[ 32.517027] shpchp 0000:40:11.0: HPC vendor_id 1022 device_id 7458 ss_vid 0 ss_did 0
[ 32.527449] shpchp 0000:40:11.0: Cannot reserve MMIO region
[ 32.559523] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.577017] ipmi_si 0000:01:04.6: PCI INT A -> Link[LNKW] -> GSI 16 (level, high) -> IRQ 16
[ 32.590592] ipmi_si: Trying PCI-specified kcs state machine at mem address 0xd9df0000, slave address 0x0, irq 16
[ 32.744014] IRQ 16/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs
[ 32.775035] Using irq 16
[ 32.961441] ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11)
[ 32.988462] IPMI kcs interface initialized
[ 34.246613] Adding 2963952k swap on /dev/sdf5. Priority:-1 extents:1 across:2963952k
[ 34.584576] EXT3 FS on sdf1, internal journal
[ 35.306670] loop: module loaded
[ 36.941235] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 40.127866] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[ 40.155925] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 50.332009] eth0: no IPv6 routers present
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: ACPI issues on HP DL585 G2
2009-06-30 1:15 ` dann frazier
@ 2009-06-30 1:17 ` Stephen Frost
2009-06-30 1:47 ` Yinghai Lu
2009-06-30 1:18 ` Stephen Frost
1 sibling, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-06-30 1:17 UTC (permalink / raw)
To: dann frazier
Cc: Alex Chiang, linux-kernel, David Altobelli, nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 717 bytes --]
* dann frazier (dannf@hp.com) wrote:
> On Sun, Jun 28, 2009 at 06:32:58PM -0400, Stephen Frost wrote:
> > * Alex Chiang (achiang@hp.com) wrote:
> > > I'm just scanning mail on the weekend, but what version of the
> > > BIOS are you on? Do you have the latest?
> >
> > Check the message I just posted, it includes a dmesg under 2.6.30 (also
> > with noapic, since it didn't boot w/o it again).
>
> fyi, I tested an HP DL585 G2 w/ the same 2.6.30 kernel build
> and didn't have any problems. I am running the A07 3/11/2009 BIOS.
> dmesg output follows:
Yeah, it's working fine on some of my other DL585's too. :/ I've really
got no idea what's up with this box. Thanks for the info tho.
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 1:17 ` Stephen Frost
@ 2009-06-30 1:47 ` Yinghai Lu
2009-06-30 1:51 ` Stephen Frost
0 siblings, 1 reply; 26+ messages in thread
From: Yinghai Lu @ 2009-06-30 1:47 UTC (permalink / raw)
To: Stephen Frost
Cc: dann frazier, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
On Mon, Jun 29, 2009 at 6:17 PM, Stephen Frost<sfrost@snowman.net> wrote:
> * dann frazier (dannf@hp.com) wrote:
>> On Sun, Jun 28, 2009 at 06:32:58PM -0400, Stephen Frost wrote:
>> > * Alex Chiang (achiang@hp.com) wrote:
>> > > I'm just scanning mail on the weekend, but what version of the
>> > > BIOS are you on? Do you have the latest?
>> >
>> > Check the message I just posted, it includes a dmesg under 2.6.30 (also
>> > with noapic, since it didn't boot w/o it again).
>>
>> fyi, I tested an HP DL585 G2 w/ the same 2.6.30 kernel build
>> and didn't have any problems. I am running the A07 3/11/2009 BIOS.
>> dmesg output follows:
>
> Yeah, it's working fine on some of my other DL585's too. :/ I've really
> got no idea what's up with this box. Thanks for the info tho.
it seems storage cards are different.
dann's is 42:01.0 the LSI
your's is 42.02.0 the cciss?
YH
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 1:47 ` Yinghai Lu
@ 2009-06-30 1:51 ` Stephen Frost
2009-06-30 1:53 ` dann frazier
0 siblings, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-06-30 1:51 UTC (permalink / raw)
To: Yinghai Lu
Cc: dann frazier, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 818 bytes --]
* Yinghai Lu (yhlu.kernel@gmail.com) wrote:
> it seems storage cards are different.
>
> dann's is 42:01.0 the LSI
> your's is 42.02.0 the cciss?
Yeah, I have a P600 installed in this DL585.
lspci -v for the P600:
42:02.0 RAID bus controller: Hewlett-Packard Company Smart Array P600
Subsystem: Hewlett-Packard Company 3 Gb/s SAS RAID
Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 11
Memory at dfef0000 (64-bit, non-prefetchable) [size=8K]
I/O ports at 3000 [size=256]
Memory at dfe80000 (64-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at de000000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: cciss
Of course, it seems to work ok under 2.6.22..
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread* Re: ACPI issues on HP DL585 G2
2009-06-30 1:51 ` Stephen Frost
@ 2009-06-30 1:53 ` dann frazier
2009-06-30 2:06 ` Stephen Frost
2009-06-30 2:10 ` Stephen Frost
0 siblings, 2 replies; 26+ messages in thread
From: dann frazier @ 2009-06-30 1:53 UTC (permalink / raw)
To: Stephen Frost
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
On Mon, Jun 29, 2009 at 09:51:40PM -0400, Stephen Frost wrote:
> * Yinghai Lu (yhlu.kernel@gmail.com) wrote:
> > it seems storage cards are different.
> >
> > dann's is 42:01.0 the LSI
> > your's is 42.02.0 the cciss?
>
> Yeah, I have a P600 installed in this DL585.
>
> lspci -v for the P600:
>
> 42:02.0 RAID bus controller: Hewlett-Packard Company Smart Array P600
> Subsystem: Hewlett-Packard Company 3 Gb/s SAS RAID
> Flags: bus master, 66MHz, medium devsel, latency 120, IRQ 11
> Memory at dfef0000 (64-bit, non-prefetchable) [size=8K]
> I/O ports at 3000 [size=256]
> Memory at dfe80000 (64-bit, non-prefetchable) [size=256K]
> [virtual] Expansion ROM at de000000 [disabled] [size=256K]
> Capabilities: <access denied>
> Kernel driver in use: cciss
>
> Of course, it seems to work ok under 2.6.22..
What about your other working DL585 boxes? Are they G2's, and are they
also using P600s?
--
dann frazier
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 1:53 ` dann frazier
@ 2009-06-30 2:06 ` Stephen Frost
2009-06-30 16:08 ` dann frazier
2009-06-30 19:30 ` dann frazier
2009-06-30 2:10 ` Stephen Frost
1 sibling, 2 replies; 26+ messages in thread
From: Stephen Frost @ 2009-06-30 2:06 UTC (permalink / raw)
To: dann frazier
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 582 bytes --]
* dann frazier (dannf@dannf.org) wrote:
> What about your other working DL585 boxes? Are they G2's, and are they
> also using P600s?
The other DL585 G2 that I've got with the latest BIOS/etc, running under
2.6.29, has a P800 installed, and it's working fine. Actually, the
other DL585 G2's that we had problems running something newer than
2.6.22 on also had P600's.. It was quite a while ago that we tried to
upgrade those (around 2.6.26), but I'm guessing if we tried now we'd hit
the same issue.
Don't suppose you can grab a P600 from somewhere and try?
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 2:06 ` Stephen Frost
@ 2009-06-30 16:08 ` dann frazier
2009-06-30 19:30 ` dann frazier
1 sibling, 0 replies; 26+ messages in thread
From: dann frazier @ 2009-06-30 16:08 UTC (permalink / raw)
To: Stephen Frost
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
On Mon, Jun 29, 2009 at 10:06:44PM -0400, Stephen Frost wrote:
> * dann frazier (dannf@dannf.org) wrote:
> > What about your other working DL585 boxes? Are they G2's, and are they
> > also using P600s?
>
> The other DL585 G2 that I've got with the latest BIOS/etc, running under
> 2.6.29, has a P800 installed, and it's working fine. Actually, the
> other DL585 G2's that we had problems running something newer than
> 2.6.22 on also had P600's.. It was quite a while ago that we tried to
> upgrade those (around 2.6.26), but I'm guessing if we tried now we'd hit
> the same issue.
>
> Don't suppose you can grab a P600 from somewhere and try?
I'll see if I can find one. Though, if you're comfortable building
your own kernels for testing, a git bisect might help.
--
dann frazier
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 2:06 ` Stephen Frost
2009-06-30 16:08 ` dann frazier
@ 2009-06-30 19:30 ` dann frazier
2009-07-01 1:35 ` Stephen Frost
1 sibling, 1 reply; 26+ messages in thread
From: dann frazier @ 2009-06-30 19:30 UTC (permalink / raw)
To: Stephen Frost
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
On Mon, Jun 29, 2009 at 10:06:44PM -0400, Stephen Frost wrote:
> * dann frazier (dannf@dannf.org) wrote:
> > What about your other working DL585 boxes? Are they G2's, and are they
> > also using P600s?
>
> The other DL585 G2 that I've got with the latest BIOS/etc, running under
> 2.6.29, has a P800 installed, and it's working fine. Actually, the
> other DL585 G2's that we had problems running something newer than
> 2.6.22 on also had P600's.. It was quite a while ago that we tried to
> upgrade those (around 2.6.26), but I'm guessing if we tried now we'd hit
> the same issue.
>
> Don't suppose you can grab a P600 from somewhere and try?
Got one, and I am able to reproduce a hang while initializing
cciss. I'll try narrowing down the issue.
--
dann frazier
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 19:30 ` dann frazier
@ 2009-07-01 1:35 ` Stephen Frost
2009-07-03 22:54 ` dann frazier
0 siblings, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-07-01 1:35 UTC (permalink / raw)
To: dann frazier
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 397 bytes --]
* dann frazier (dannf@dannf.org) wrote:
> On Mon, Jun 29, 2009 at 10:06:44PM -0400, Stephen Frost wrote:
> > Don't suppose you can grab a P600 from somewhere and try?
>
> Got one, and I am able to reproduce a hang while initializing
> cciss. I'll try narrowing down the issue.
Great! Glad to hear it. If there's anything I can do to help, please
let me know.
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-07-01 1:35 ` Stephen Frost
@ 2009-07-03 22:54 ` dann frazier
0 siblings, 0 replies; 26+ messages in thread
From: dann frazier @ 2009-07-03 22:54 UTC (permalink / raw)
To: Stephen Frost
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
On Tue, Jun 30, 2009 at 09:35:04PM -0400, Stephen Frost wrote:
> * dann frazier (dannf@dannf.org) wrote:
> > On Mon, Jun 29, 2009 at 10:06:44PM -0400, Stephen Frost wrote:
> > > Don't suppose you can grab a P600 from somewhere and try?
> >
> > Got one, and I am able to reproduce a hang while initializing
> > cciss. I'll try narrowing down the issue.
>
> Great! Glad to hear it. If there's anything I can do to help, please
> let me know.
Here's what I've found.
Bisecting the hang lands on this commit, which went in right before
2.6.26 went final:
77b96bd: cciss: fix regression that no device nodes are created
if no logical drives
This seems to have caused problems for 2.6.26 era kernels (including
Debian's current stable release). I'm not sure if this problem still
exists in 2.6.31-rc1, because I think we are hitting an earlier issue
which also manifests as a hang.
In 2.6.31-rc1, I see a hang while trying to request the firmware
version using sendcmd_withirq(). If I switch this to a sendcmd(), it
proceeds until the next sendcmd_withirq(). /proc/interrupts shows a 0
count for all cpus on the chosen IRQ line (26). This makes me wonder
if its related to the issue:
http://www.spinics.net/lists/linux-scsi/msg37177.html
--
dann frazier
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 1:53 ` dann frazier
2009-06-30 2:06 ` Stephen Frost
@ 2009-06-30 2:10 ` Stephen Frost
2009-06-30 2:15 ` dann frazier
1 sibling, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-06-30 2:10 UTC (permalink / raw)
To: dann frazier
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 349 bytes --]
* dann frazier (dannf@dannf.org) wrote:
> What about your other working DL585 boxes? Are they G2's, and are they
> also using P600s?
On the other hand, my coworker tells me that he tried swapping in a P800
on this DL585 and it didn't solve the problem at the time. Specifics
are a bit difficult (this was last year sometime).
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 2:10 ` Stephen Frost
@ 2009-06-30 2:15 ` dann frazier
2009-06-30 2:21 ` Stephen Frost
0 siblings, 1 reply; 26+ messages in thread
From: dann frazier @ 2009-06-30 2:15 UTC (permalink / raw)
To: Stephen Frost
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
On Mon, Jun 29, 2009 at 10:10:13PM -0400, Stephen Frost wrote:
> * dann frazier (dannf@dannf.org) wrote:
> > What about your other working DL585 boxes? Are they G2's, and are they
> > also using P600s?
>
> On the other hand, my coworker tells me that he tried swapping in a P800
> on this DL585 and it didn't solve the problem at the time. Specifics
> are a bit difficult (this was last year sometime).
Ok - though my question was to understand what is different between
this DL585 and the other DL585s you have that are working.
--
dann frazier
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 2:15 ` dann frazier
@ 2009-06-30 2:21 ` Stephen Frost
2009-06-30 5:57 ` Yinghai Lu
0 siblings, 1 reply; 26+ messages in thread
From: Stephen Frost @ 2009-06-30 2:21 UTC (permalink / raw)
To: dann frazier
Cc: Yinghai Lu, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 1221 bytes --]
* dann frazier (dannf@hp.com) wrote:
> On Mon, Jun 29, 2009 at 10:10:13PM -0400, Stephen Frost wrote:
> > On the other hand, my coworker tells me that he tried swapping in a P800
> > on this DL585 and it didn't solve the problem at the time. Specifics
> > are a bit difficult (this was last year sometime).
>
> Ok - though my question was to understand what is different between
> this DL585 and the other DL585s you have that are working.
Well, I've got 4 DL585 G2's:
durin - running 2.6.22 w/ P800 fine (had problems w/ 2.6.26)
stormcrow - running 2.6.22 w/ P800 fine (had problems w/ 2.6.26)
aragorn - running 2.6.29 w/ P800 fine
vardamir - running 2.6.30 w/ P600 (needs noacpi to boot)
vardamir used to have a QLogic Fibrechannel card in it as well, but I
pulled that over the weekend to see if that was causing the problem.
Didn't change anything though.
I don't think there's anything else all that special about these
systems. aragorn's got 64G, the other 3 have 16G, I think they've all
got a full complement of SAS drives, etc.
Do you want me to pull dmesg/lspci/etc/etc from all these systems?
Would it help? What would you like to see, specifically?
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 2:21 ` Stephen Frost
@ 2009-06-30 5:57 ` Yinghai Lu
0 siblings, 0 replies; 26+ messages in thread
From: Yinghai Lu @ 2009-06-30 5:57 UTC (permalink / raw)
To: Stephen Frost
Cc: dann frazier, Alex Chiang, linux-kernel, David Altobelli,
nagananda.chumbalkar
On Mon, Jun 29, 2009 at 7:21 PM, Stephen Frost<sfrost@snowman.net> wrote:
> * dann frazier (dannf@hp.com) wrote:
>> On Mon, Jun 29, 2009 at 10:10:13PM -0400, Stephen Frost wrote:
>> > On the other hand, my coworker tells me that he tried swapping in a P800
>> > on this DL585 and it didn't solve the problem at the time. Specifics
>> > are a bit difficult (this was last year sometime).
>>
>> Ok - though my question was to understand what is different between
>> this DL585 and the other DL585s you have that are working.
>
> Well, I've got 4 DL585 G2's:
>
> durin - running 2.6.22 w/ P800 fine (had problems w/ 2.6.26)
> stormcrow - running 2.6.22 w/ P800 fine (had problems w/ 2.6.26)
> aragorn - running 2.6.29 w/ P800 fine
> vardamir - running 2.6.30 w/ P600 (needs noacpi to boot)
>
> vardamir used to have a QLogic Fibrechannel card in it as well, but I
> pulled that over the weekend to see if that was causing the problem.
> Didn't change anything though.
>
> I don't think there's anything else all that special about these
> systems. aragorn's got 64G, the other 3 have 16G, I think they've all
> got a full complement of SAS drives, etc.
can you make sure the P800 or P600 are in same pci-x slot?
YH
^ permalink raw reply [flat|nested] 26+ messages in thread
* Re: ACPI issues on HP DL585 G2
2009-06-30 1:15 ` dann frazier
2009-06-30 1:17 ` Stephen Frost
@ 2009-06-30 1:18 ` Stephen Frost
1 sibling, 0 replies; 26+ messages in thread
From: Stephen Frost @ 2009-06-30 1:18 UTC (permalink / raw)
To: dann frazier
Cc: Alex Chiang, linux-kernel, David Altobelli, nagananda.chumbalkar
[-- Attachment #1: Type: text/plain, Size: 393 bytes --]
* dann frazier (dannf@hp.com) wrote:
> fyi, I tested an HP DL585 G2 w/ the same 2.6.30 kernel build
> and didn't have any problems. I am running the A07 3/11/2009 BIOS.
> dmesg output follows:
I did post updates including dmesg output from the problem box w/ ACPI
enabled and 'debug' on the cmdline. If you'd like me to send them
directly to you also, just let me know.
Thanks,
Stephen
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
^ permalink raw reply [flat|nested] 26+ messages in thread
end of thread, other threads:[~2009-07-03 22:54 UTC | newest]
Thread overview: 26+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-06-28 3:40 ACPI issues on HP DL585 G2 Stephen Frost
2009-06-28 4:26 ` Yinghai Lu
2009-06-28 14:17 ` Stephen Frost
2009-06-28 22:31 ` Stephen Frost
2009-06-29 1:49 ` Yinghai Lu
2009-06-29 1:57 ` Stephen Frost
2009-06-29 3:47 ` Yinghai Lu
2009-06-29 13:23 ` Stephen Frost
2009-06-28 17:20 ` Alex Chiang
2009-06-28 17:35 ` Stephen Frost
2009-06-28 22:32 ` Stephen Frost
2009-06-30 1:15 ` dann frazier
2009-06-30 1:17 ` Stephen Frost
2009-06-30 1:47 ` Yinghai Lu
2009-06-30 1:51 ` Stephen Frost
2009-06-30 1:53 ` dann frazier
2009-06-30 2:06 ` Stephen Frost
2009-06-30 16:08 ` dann frazier
2009-06-30 19:30 ` dann frazier
2009-07-01 1:35 ` Stephen Frost
2009-07-03 22:54 ` dann frazier
2009-06-30 2:10 ` Stephen Frost
2009-06-30 2:15 ` dann frazier
2009-06-30 2:21 ` Stephen Frost
2009-06-30 5:57 ` Yinghai Lu
2009-06-30 1:18 ` Stephen Frost
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox