* >10% performance degradation since 2.6.18
@ 2009-07-03 2:56 Matthew Wilcox
2009-07-03 17:04 ` Paul E. McKenney
2009-07-03 18:19 ` Andi Kleen
0 siblings, 2 replies; 33+ messages in thread
From: Matthew Wilcox @ 2009-07-03 2:56 UTC (permalink / raw)
To: linux-kernel
Cc: Styner, Douglas W, Chinang Ma, Prickett, Terry O, Matthew Wilcox
[-- Attachment #1: Type: text/plain, Size: 6350 bytes --]
The team of database performance specialists that I work with have put
together a shiny new system with dual Nehalem processors and 192 SSDs.
The SSDs are in SAS enclosures which are connected to LSI 3801 SAS
controllers.
Unfortunately, 2.6.30's performance has fallen off a cliff compared to Red
Hat Enterprise 5.2 (2.6.18-92). Because Nehalem support was added after
2.6.18, doing bisection is somewhat of a pain, and because it's a great
big OLTP benchmark which takes hours to run, it's even more impractical.
We've included the top 30 functions below, but honestly, we're looking
at a 10% dip in performance, and shaving the length of time it takes
to execute mpt_interrupt and kmem_cache_alloc in half doesn't feel like
it's going to be enough.
On the subject of kmem_cache_alloc, this run was using SLAB, not SLUB
or SLQB. I've attached the .configs for both kernels, in case they help.
Including the raw /proc/interrupts doesn't seem very helpful. Lots of
columns (16 CPUs), mostly with zeroes in them. I've written a hacky
little perl script to summarise the contents of /proc/interrupts.
Mail me for it if you want it.
-----------------------
Linux OLTP Performance summary
Kernel# Speedup(x) Intr/s CtxSw/s us% sys% idle%
iowait%
2.6.18-92.el5-op 1.000 137524 183275 68 28 1 3
2.6.30 0.897 171211 152962 71 29 0 0
Server configurations:
NHM-EP 2.93GHz+turbo 2 sockets/8 cores/16 threads
72GB memory. 4 LSI 3801SAS + 2 QLA2300, 192 SSDs+ 28 spindles log
Summary of /proc/interrupts for 2.6.18-92.el5-op:
114: 5474028 IO-APIC-level qla2xxx
122: 404 IO-APIC-level qla2xxx
130: 69084136 PCI-MSI-X eth1-Q0
138: 1 PCI-MSI-X eth1
146: 61405320 PCI-MSI-X eth0-Q0
154: 1 PCI-MSI-X eth0
162: 98883979 PCI-MSI ioc0
170: 100831391 PCI-MSI ioc1
178: 99384797 PCI-MSI ioc2
186: 89566728 PCI-MSI ioc3
NMI: 53394359
LOC: 84892159
Summary of /proc/interrupts for 2.6.30:
48: 5766139 IO-APIC-fasteoi qla2xxx
49: 143 IO-APIC-fasteoi qla2xxx
79: 19028 PCI-MSI-edge ahci
80: 13129177 PCI-MSI-edge eth1-tx-0
81: 12916368 PCI-MSI-edge eth1-tx-1
82: 10176805 PCI-MSI-edge eth1-tx-2
83: 12145055 PCI-MSI-edge eth1-tx-3
84: 13942598 PCI-MSI-edge eth1-rx-0
85: 23239552 PCI-MSI-edge eth1-rx-1
86: 24251265 PCI-MSI-edge eth1-rx-2
87: 12875519 PCI-MSI-edge eth1-rx-3
88: 1 PCI-MSI-edge eth1
89: 8880631 PCI-MSI-edge eth0-tx-0
90: 9251548 PCI-MSI-edge eth0-tx-1
91: 7306336 PCI-MSI-edge eth0-tx-2
92: 10463687 PCI-MSI-edge eth0-tx-3
93: 11147199 PCI-MSI-edge eth0-rx-0
94: 11155044 PCI-MSI-edge eth0-rx-1
95: 11155852 PCI-MSI-edge eth0-rx-2
96: 9921438 PCI-MSI-edge eth0-rx-3
97: 1 PCI-MSI-edge eth0
98: 96487143 PCI-MSI-edge ioc0
99: 98432533 PCI-MSI-edge ioc1
100: 96488192 PCI-MSI-edge ioc2
101: 87011174 PCI-MSI-edge ioc3
NMI: 57707812 Non-maskable interrupts
LOC: 73336211 Local timer interrupts
SPU: 0 Spurious interrupts
RES: 13506834 Rescheduling interrupts
CAL: 70455 Function call interrupts
TLB: 19341 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
======oprofile CPU_CLK_UNHALTED for top 30 functions
Cycles% 2.6.18-92.el5-op Cycles% 2.6.30
70.1409 <database> 67.0207 <database>
1.3556 mpt_interrupt 1.7029 mpt_interrupt
1.1622 __blockdev_direct_IO 1.1443 kmem_cache_alloc
0.8246 kmem_cache_free 0.8801 kmem_cache_free
0.7108 schedule 0.7774 __blockdev_direct_IO
0.6733 scsi_request_fn 0.7031 scsi_request_fn
0.6114 kmem_cache_alloc 0.5317 __schedule
0.4207 follow_hugetlb_page 0.3922 task_rq_lock
0.4062 list_del 0.3629 sd_prep_fn
0.3400 __switch_to 0.3504 list_del
0.3339 generic_make_request 0.3382 __sigsetjmp
0.3204 memmove 0.3270 __switch_to
0.3088 __sigsetjmp 0.3257 generic_make_request
0.2848 get_request 0.3116 kfree
0.2804 lock_timer_base 0.2895 memmove
0.2789 kfree 0.2803 try_to_wake_up
0.2736 scsi_get_command 0.2625 fget_light
0.2732 task_rq_lock 0.2579 generic_file_aio_read
0.2716 scsi_prep_fn 0.2530 mptscsih_io_done
0.2572 __end_that_request_first 0.2402 aio_complete
0.2567 fget_light 0.2382 mptscsih_qcmd
0.2531 submit_page_section 0.2342 fget
0.2428 mempool_alloc 0.2277 gup_huge_pmd
0.2428 __generic_file_aio_read 0.2264 submit_page_section
0.2368 touch_atime 0.2204 touch_atime
0.2270 __aio_get_req 0.2165 __list_add
0.2223 mptscsih_qcmd 0.2063 scsi_dispatch_cmd
0.2198 init_request_from_bio 0.2040 lock_timer_base
0.2191 fget 0.2036 irq_entries_start
0.2141 device_not_available 0.2036 plist_del
0.2125 try_to_wake_up 0.2004 elv_queue_empty
0.2065 mptscsih_io_done 0.2004 get_user_pages_fast
0.2059 math_state_restore 0.1997 copy_user_generic_string
0.2035 __errno_location 0.1925 kref_get
0.2022 find_vma 0.1905 scsi_finish_command
0.1967 _setjmp 0.1888 aio_rw_vect_retry
0.1966 kref_get 0.1882 __errno_location
0.1952 memset 0.1849 scsi_device_unbusy
0.1924 __list_add 0.1846 pick_next_highest_task_rt
0.1917 copy_user_generic 0.1826 memset_c
0.1907 acpi_os_read_port 0.1819 _setjmp
0.1842 elv_queue_empty 0.1816 ipc_lock
0.1809 scsi_dispatch_cmd 0.1809 mod_timer
0.1808 sd_init_command 0.1800 noop_queue_empty
0.1789 swiotlb_unmap_sg 0.1796 scsi_softirq_done
0.1766 rw_verify_area 0.1757 scsi_run_queue
-----------------------------------
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
[-- Attachment #2: linux-2.6.18-92.el5-op.config --]
[-- Type: text/plain, Size: 62398 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18-92.el5-op
# Sat May 16 15:22:46 2009
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Process debugging support
#
CONFIG_PTRACE=y
CONFIG_UTRACE=y
#
# Block layer
#
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_LSF=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y
# CONFIG_X86_64_XEN is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=m
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_NODES_SHIFT=6
CONFIG_X86_64_ACPI_NUMA=y
# CONFIG_NUMA_EMU is not set
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_MEMORY_HOTPLUG=y
#
# Memory hotplug is not guaranteed to work with Software Suspend
#
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=255
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_TRACK_DIRTY_PAGES=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_TICK_DIVIDER=y
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_IBM_BAY=y
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=m
CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_NALGO=m
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
#
# TCP congestion control
#
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_SUBTREES is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_ROUTE_FWMARK=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_H323=m
CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_NAT_H323=m
CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_TUX=m
#
# TUX options
#
CONFIG_TUX_EXTCGI=y
CONFIG_TUX_EXTENDED_LOG=y
# CONFIG_TUX_DEBUG is not set
CONFIG_NETLABEL=y
CONFIG_FIB_RULES=y
#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_NET_WIRELESS_RTNETLINK=y
CONFIG_MAC80211=m
CONFIG_MAC80211_RCSIMPLE=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_PNC2000 is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_NANDSIM=m
#
# OneNAND Flash Device Drivers
#
# CONFIG_MTD_ONENAND is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_TASK_IOCTL=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_ATA_INTEL_COMBINED=y
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
CONFIG_DM_MULTIPATH_RDAC=m
CONFIG_DM_MULTIPATH_HP=m
CONFIG_DM_UEVENT=y
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_FORCEDETH=m
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_IGB=m
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
CONFIG_BNX2X=m
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
CONFIG_IWL4965=m
CONFIG_IWL4965_QOS=y
CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
CONFIG_IWL4965_SENSITIVITY=y
# CONFIG_IWL4965_DEBUG is not set
# CONFIG_IWL3945 is not set
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
# CONFIG_CAPI_EICON is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_CRASH=m
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
# CONFIG_I2C_I810 is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA6588=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_CPIA2=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
#
# Encoders and Decoders
#
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_TLV320AIC23B=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_DEVICE=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_LIBUSUAL is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_INFINIBAND_SDP=m
# CONFIG_INFINIBAND_SDP_DEBUG is not set
CONFIG_INFINIBAND_QLGC_VNIC=m
# CONFIG_INFINIBAND_QLGC_VNIC_DEBUG is not set
CONFIG_INFINIBAND_QLGC_VNIC_STATS=y
CONFIG_INFINIBAND_MADEYE=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_K8=m
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_SQUASHFS_VMALLOC is not set
CONFIG_VXFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_LIST=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
CONFIG_BOOT_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_IOMMU_DEBUG is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_SECLVL is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_API=m
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NHMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_SIGNATURE=y
CONFIG_CRYPTO_SIGNATURE_DSA=y
CONFIG_CRYPTO_MPILIB=y
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[-- Attachment #3: linux-2.6.30.config --]
[-- Type: text/plain, Size: 81659 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30
# Wed Jun 17 23:53:15 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y
#
# Processor type and features
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=255
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTREMOVE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_SCHED_HRTICK is not set
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=m
CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_SPEEDSTEP_CENTRINO=y
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_SECURITY is not set
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_IP6 is not set
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
# CONFIG_NET_SCH_DRR is not set
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
# CONFIG_RFKILL_INPUT is not set
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
# CONFIG_INFTL is not set
CONFIG_RFD_FTL=m
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
CONFIG_MTD_SCB2_FLASH=m
# CONFIG_MTD_NETtel is not set
# CONFIG_MTD_DILNETPC is not set
# CONFIG_MTD_L440GX is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_DELL_LAPTOP is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_SCSI_ARCMSR=m
# CONFIG_SCSI_ARCMSR_AER is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
# CONFIG_SCSI_MPT2SAS is not set
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_FCOE_FNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_SIL680 is not set
CONFIG_PATA_SIS=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SMSC9420 is not set
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
# CONFIG_ATP is not set
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
CONFIG_IGB=m
# CONFIG_IGBVF is not set
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=m
# CONFIG_ENIC is not set
CONFIG_IXGBE=m
CONFIG_IXGB=m
CONFIG_S2IO=m
# CONFIG_VXGE is not set
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
# CONFIG_NIU is not set
# CONFIG_MLX4_EN is not set
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
# CONFIG_TEHUTI is not set
CONFIG_BNX2X=m
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
# CONFIG_USB_HSO is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_WAN is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
# CONFIG_ATM_FORE200E is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
# CONFIG_ATM_SOLOS is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
# CONFIG_PPPOL2TP is not set
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
CONFIG_TOUCHSCREEN_MTOUCH=m
# CONFIG_TOUCHSCREEN_INEXIO is not set
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_WM97XX is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
# CONFIG_TOUCHSCREEN_TSC2007 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_NFORCE2_S4985 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
CONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_I5K_AMB is not set
CONFIG_SENSORS_F71805F=m
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_SIS5595=m
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
CONFIG_IBMASR=m
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
CONFIG_W83627HF_WDT=m
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_CPIA2=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
# CONFIG_VIDEO_HDPVR is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_EM28XX_ALSA is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
CONFIG_USB_DSBR=m
# CONFIG_USB_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
CONFIG_AGP_SIS=y
CONFIG_AGP_VIA=y
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_UVESA is not set
CONFIG_FB_VESA=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_LE80578 is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
# CONFIG_SND_HIFIER is not set
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VIRTUOSO is not set
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HID_DEBUG=y
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=m
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
# CONFIG_USB_SERIAL_SYMBOL is not set
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_SDRICOH_CS is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
CONFIG_INFINIBAND_NES=m
# CONFIG_INFINIBAND_NES_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
# CONFIG_EDAC_I82975X is not set
CONFIG_EDAC_I3000=m
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
CONFIG_EDAC_I5000=m
# CONFIG_EDAC_I5100 is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
# CONFIG_RTC_DRV_DS1374 is not set
CONFIG_RTC_DRV_DS1672=m
# CONFIG_RTC_DRV_MAX6900 is not set
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=m
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_FS_XIP=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
# CONFIG_GFS2_FS_LOCKING_DLM is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
# Caches
#
CONFIG_FSCACHE=m
# CONFIG_FSCACHE_STATS is not set
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
CONFIG_CACHEFILES=m
CONFIG_CACHEFILES_DEBUG=y
# CONFIG_CACHEFILES_HISTOGRAM is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 2:56 >10% performance degradation since 2.6.18 Matthew Wilcox
@ 2009-07-03 17:04 ` Paul E. McKenney
2009-07-03 18:19 ` Andi Kleen
1 sibling, 0 replies; 33+ messages in thread
From: Paul E. McKenney @ 2009-07-03 17:04 UTC (permalink / raw)
To: Matthew Wilcox
Cc: linux-kernel, Styner, Douglas W, Chinang Ma, Prickett, Terry O,
Matthew Wilcox
On Thu, Jul 02, 2009 at 08:56:08PM -0600, Matthew Wilcox wrote:
>
> The team of database performance specialists that I work with have put
> together a shiny new system with dual Nehalem processors and 192 SSDs.
> The SSDs are in SAS enclosures which are connected to LSI 3801 SAS
> controllers.
>
> Unfortunately, 2.6.30's performance has fallen off a cliff compared to Red
> Hat Enterprise 5.2 (2.6.18-92). Because Nehalem support was added after
> 2.6.18, doing bisection is somewhat of a pain, and because it's a great
> big OLTP benchmark which takes hours to run, it's even more impractical.
>
> We've included the top 30 functions below, but honestly, we're looking
> at a 10% dip in performance, and shaving the length of time it takes
> to execute mpt_interrupt and kmem_cache_alloc in half doesn't feel like
> it's going to be enough.
Hmmmm... Given that you are only seeing about a 5% decrease in the
CPU time consumed by the database, but a 10% decrease in throughput,
I wonder if there is a change in memory layout? Or a decrease in the
amount of memory available to the database?
Thanx, Paul
> On the subject of kmem_cache_alloc, this run was using SLAB, not SLUB
> or SLQB. I've attached the .configs for both kernels, in case they help.
>
> Including the raw /proc/interrupts doesn't seem very helpful. Lots of
> columns (16 CPUs), mostly with zeroes in them. I've written a hacky
> little perl script to summarise the contents of /proc/interrupts.
> Mail me for it if you want it.
>
> -----------------------
> Linux OLTP Performance summary
> Kernel# Speedup(x) Intr/s CtxSw/s us% sys% idle%
> iowait%
> 2.6.18-92.el5-op 1.000 137524 183275 68 28 1 3
> 2.6.30 0.897 171211 152962 71 29 0 0
>
> Server configurations:
> NHM-EP 2.93GHz+turbo 2 sockets/8 cores/16 threads
> 72GB memory. 4 LSI 3801SAS + 2 QLA2300, 192 SSDs+ 28 spindles log
>
> Summary of /proc/interrupts for 2.6.18-92.el5-op:
>
> 114: 5474028 IO-APIC-level qla2xxx
> 122: 404 IO-APIC-level qla2xxx
> 130: 69084136 PCI-MSI-X eth1-Q0
> 138: 1 PCI-MSI-X eth1
> 146: 61405320 PCI-MSI-X eth0-Q0
> 154: 1 PCI-MSI-X eth0
> 162: 98883979 PCI-MSI ioc0
> 170: 100831391 PCI-MSI ioc1
> 178: 99384797 PCI-MSI ioc2
> 186: 89566728 PCI-MSI ioc3
> NMI: 53394359
> LOC: 84892159
>
> Summary of /proc/interrupts for 2.6.30:
>
> 48: 5766139 IO-APIC-fasteoi qla2xxx
> 49: 143 IO-APIC-fasteoi qla2xxx
> 79: 19028 PCI-MSI-edge ahci
> 80: 13129177 PCI-MSI-edge eth1-tx-0
> 81: 12916368 PCI-MSI-edge eth1-tx-1
> 82: 10176805 PCI-MSI-edge eth1-tx-2
> 83: 12145055 PCI-MSI-edge eth1-tx-3
> 84: 13942598 PCI-MSI-edge eth1-rx-0
> 85: 23239552 PCI-MSI-edge eth1-rx-1
> 86: 24251265 PCI-MSI-edge eth1-rx-2
> 87: 12875519 PCI-MSI-edge eth1-rx-3
> 88: 1 PCI-MSI-edge eth1
> 89: 8880631 PCI-MSI-edge eth0-tx-0
> 90: 9251548 PCI-MSI-edge eth0-tx-1
> 91: 7306336 PCI-MSI-edge eth0-tx-2
> 92: 10463687 PCI-MSI-edge eth0-tx-3
> 93: 11147199 PCI-MSI-edge eth0-rx-0
> 94: 11155044 PCI-MSI-edge eth0-rx-1
> 95: 11155852 PCI-MSI-edge eth0-rx-2
> 96: 9921438 PCI-MSI-edge eth0-rx-3
> 97: 1 PCI-MSI-edge eth0
> 98: 96487143 PCI-MSI-edge ioc0
> 99: 98432533 PCI-MSI-edge ioc1
> 100: 96488192 PCI-MSI-edge ioc2
> 101: 87011174 PCI-MSI-edge ioc3
> NMI: 57707812 Non-maskable interrupts
> LOC: 73336211 Local timer interrupts
> SPU: 0 Spurious interrupts
> RES: 13506834 Rescheduling interrupts
> CAL: 70455 Function call interrupts
> TLB: 19341 TLB shootdowns
> TRM: 0 Thermal event interrupts
> THR: 0 Threshold APIC interrupts
>
>
> ======oprofile CPU_CLK_UNHALTED for top 30 functions
> Cycles% 2.6.18-92.el5-op Cycles% 2.6.30
> 70.1409 <database> 67.0207 <database>
> 1.3556 mpt_interrupt 1.7029 mpt_interrupt
> 1.1622 __blockdev_direct_IO 1.1443 kmem_cache_alloc
> 0.8246 kmem_cache_free 0.8801 kmem_cache_free
> 0.7108 schedule 0.7774 __blockdev_direct_IO
> 0.6733 scsi_request_fn 0.7031 scsi_request_fn
> 0.6114 kmem_cache_alloc 0.5317 __schedule
> 0.4207 follow_hugetlb_page 0.3922 task_rq_lock
> 0.4062 list_del 0.3629 sd_prep_fn
> 0.3400 __switch_to 0.3504 list_del
> 0.3339 generic_make_request 0.3382 __sigsetjmp
> 0.3204 memmove 0.3270 __switch_to
> 0.3088 __sigsetjmp 0.3257 generic_make_request
> 0.2848 get_request 0.3116 kfree
> 0.2804 lock_timer_base 0.2895 memmove
> 0.2789 kfree 0.2803 try_to_wake_up
> 0.2736 scsi_get_command 0.2625 fget_light
> 0.2732 task_rq_lock 0.2579 generic_file_aio_read
> 0.2716 scsi_prep_fn 0.2530 mptscsih_io_done
> 0.2572 __end_that_request_first 0.2402 aio_complete
> 0.2567 fget_light 0.2382 mptscsih_qcmd
> 0.2531 submit_page_section 0.2342 fget
> 0.2428 mempool_alloc 0.2277 gup_huge_pmd
> 0.2428 __generic_file_aio_read 0.2264 submit_page_section
> 0.2368 touch_atime 0.2204 touch_atime
> 0.2270 __aio_get_req 0.2165 __list_add
> 0.2223 mptscsih_qcmd 0.2063 scsi_dispatch_cmd
> 0.2198 init_request_from_bio 0.2040 lock_timer_base
> 0.2191 fget 0.2036 irq_entries_start
> 0.2141 device_not_available 0.2036 plist_del
> 0.2125 try_to_wake_up 0.2004 elv_queue_empty
> 0.2065 mptscsih_io_done 0.2004 get_user_pages_fast
> 0.2059 math_state_restore 0.1997 copy_user_generic_string
> 0.2035 __errno_location 0.1925 kref_get
> 0.2022 find_vma 0.1905 scsi_finish_command
> 0.1967 _setjmp 0.1888 aio_rw_vect_retry
> 0.1966 kref_get 0.1882 __errno_location
> 0.1952 memset 0.1849 scsi_device_unbusy
> 0.1924 __list_add 0.1846 pick_next_highest_task_rt
> 0.1917 copy_user_generic 0.1826 memset_c
> 0.1907 acpi_os_read_port 0.1819 _setjmp
> 0.1842 elv_queue_empty 0.1816 ipc_lock
> 0.1809 scsi_dispatch_cmd 0.1809 mod_timer
> 0.1808 sd_init_command 0.1800 noop_queue_empty
> 0.1789 swiotlb_unmap_sg 0.1796 scsi_softirq_done
> 0.1766 rw_verify_area 0.1757 scsi_run_queue
> -----------------------------------
>
> --
> Matthew Wilcox Intel Open Source Technology Centre
> "Bill, look, we understand that you're interested in selling us this
> operating system, but compare it to ours. We can't possibly take such
> a retrograde step."
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.18-92.el5-op
> # Sat May 16 15:22:46 2009
> #
> CONFIG_X86_64=y
> CONFIG_64BIT=y
> CONFIG_X86=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_SEMAPHORE_SLEEPERS=y
> CONFIG_MMU=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_EARLY_PRINTK=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_DMI=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> #
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> # CONFIG_IKCONFIG is not set
> CONFIG_CPUSETS=y
> CONFIG_RELAY=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL=y
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> CONFIG_KALLSYMS_EXTRA_PASS=y
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SHMEM=y
> CONFIG_SLAB=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_RT_MUTEXES=y
> # CONFIG_TINY_SHMEM is not set
> CONFIG_BASE_SMALL=0
> # CONFIG_SLOB is not set
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_MODVERSIONS=y
> CONFIG_MODULE_SRCVERSION_ALL=y
> CONFIG_MODULE_SIG=y
> # CONFIG_MODULE_SIG_FORCE is not set
> CONFIG_KMOD=y
> CONFIG_STOP_MACHINE=y
>
> #
> # Process debugging support
> #
> CONFIG_PTRACE=y
> CONFIG_UTRACE=y
>
> #
> # Block layer
> #
> CONFIG_LBD=y
> CONFIG_BLK_DEV_IO_TRACE=y
> CONFIG_LSF=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
>
> #
> # Processor type and features
> #
> CONFIG_X86_PC=y
> # CONFIG_X86_VSMP is not set
> # CONFIG_MK8 is not set
> # CONFIG_MPSC is not set
> CONFIG_GENERIC_CPU=y
> # CONFIG_X86_64_XEN is not set
> CONFIG_X86_L1_CACHE_BYTES=128
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_INTERNODE_CACHE_BYTES=128
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_MICROCODE=m
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> CONFIG_X86_HT=y
> CONFIG_X86_IO_APIC=y
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_MTRR=y
> CONFIG_SMP=y
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_PREEMPT_BKL=y
> CONFIG_NUMA=y
> CONFIG_K8_NUMA=y
> CONFIG_NODES_SHIFT=6
> CONFIG_X86_64_ACPI_NUMA=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
> CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_MEMORY_PROBE=y
> CONFIG_SELECT_MEMORY_MODEL=y
> # CONFIG_FLATMEM_MANUAL is not set
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> # CONFIG_SPARSEMEM_STATIC is not set
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_MEMORY_HOTPLUG=y
>
> #
> # Memory hotplug is not guaranteed to work with Software Suspend
> #
> CONFIG_MEMORY_HOTPLUG_SPARSE=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_MIGRATION=y
> CONFIG_RESOURCES_64BIT=y
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
> CONFIG_NR_CPUS=255
> CONFIG_HOTPLUG_CPU=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_TRACK_DIRTY_PAGES=y
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_TICK_DIVIDER=y
> CONFIG_IOMMU=y
> CONFIG_CALGARY_IOMMU=y
> # CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
> CONFIG_SWIOTLB=y
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> # CONFIG_SECCOMP is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> CONFIG_REORDER=y
> CONFIG_K8_NB=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_ISA_DMA_API=y
> CONFIG_GENERIC_PENDING_IRQ=y
>
> #
> # Power management options
> #
> CONFIG_PM=y
> CONFIG_PM_LEGACY=y
> # CONFIG_PM_DEBUG is not set
> CONFIG_SOFTWARE_SUSPEND=y
> CONFIG_PM_STD_PARTITION=""
> CONFIG_SUSPEND_SMP=y
>
> #
> # ACPI (Advanced Configuration and Power Interface) Support
> #
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> CONFIG_ACPI_SLEEP_PROC_FS=y
> # CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_VIDEO=m
> # CONFIG_ACPI_HOTKEY is not set
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_BAY=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_NUMA=y
> CONFIG_ACPI_ASUS=m
> CONFIG_ACPI_IBM=m
> CONFIG_ACPI_IBM_BAY=y
> CONFIG_ACPI_TOSHIBA=m
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_EC=y
> CONFIG_ACPI_POWER=y
> CONFIG_ACPI_SYSTEM=y
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_HOTPLUG_MEMORY=m
> CONFIG_ACPI_SBS=m
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_DEBUG=y
> CONFIG_CPU_FREQ_STAT=m
> CONFIG_CPU_FREQ_STAT_DETAILS=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=m
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
>
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_POWERNOW_K8=y
> CONFIG_X86_POWERNOW_K8_ACPI=y
> CONFIG_X86_SPEEDSTEP_CENTRINO=y
> CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
> CONFIG_X86_ACPI_CPUFREQ=m
>
> #
> # shared options
> #
> # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
> # CONFIG_X86_SPEEDSTEP_LIB is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCIEPORTBUS=y
> CONFIG_HOTPLUG_PCI_PCIE=m
> # CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
> CONFIG_PCI_MSI=y
> # CONFIG_PCI_DEBUG is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> CONFIG_PCCARD=y
> # CONFIG_PCMCIA_DEBUG is not set
> CONFIG_PCMCIA=y
> CONFIG_PCMCIA_LOAD_CIS=y
> CONFIG_PCMCIA_IOCTL=y
> CONFIG_CARDBUS=y
>
> #
> # PC-card bridges
> #
> CONFIG_YENTA=y
> CONFIG_YENTA_O2=y
> CONFIG_YENTA_RICOH=y
> CONFIG_YENTA_TI=y
> CONFIG_YENTA_ENE_TUNE=y
> CONFIG_YENTA_TOSHIBA=y
> CONFIG_PD6729=m
> # CONFIG_I82092 is not set
> CONFIG_PCCARD_NONSTATIC=y
>
> #
> # PCI Hotplug Support
> #
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_FAKE=m
> CONFIG_HOTPLUG_PCI_ACPI=m
> CONFIG_HOTPLUG_PCI_ACPI_IBM=m
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> CONFIG_HOTPLUG_PCI_SHPC=m
> # CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> CONFIG_COMPAT=y
> CONFIG_SYSVIPC_COMPAT=y
>
> #
> # Networking
> #
> CONFIG_NET=y
>
> #
> # Networking options
> #
> # CONFIG_NETDEBUG is not set
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_NALGO=m
> CONFIG_XFRM_USER=y
> CONFIG_NET_KEY=m
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_FWMARK=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> # CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> CONFIG_NET_IPGRE_BROADCAST=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=m
> CONFIG_INET_ESP=m
> CONFIG_INET_IPCOMP=m
> CONFIG_INET_XFRM_TUNNEL=m
> CONFIG_INET_TUNNEL=m
> CONFIG_INET_XFRM_MODE_TRANSPORT=m
> CONFIG_INET_XFRM_MODE_TUNNEL=m
> CONFIG_INET_DIAG=m
> CONFIG_INET_TCP_DIAG=m
> CONFIG_TCP_CONG_ADVANCED=y
>
> #
> # TCP congestion control
> #
> CONFIG_TCP_CONG_BIC=y
> CONFIG_TCP_CONG_CUBIC=m
> CONFIG_TCP_CONG_WESTWOOD=m
> CONFIG_TCP_CONG_HTCP=m
> CONFIG_TCP_CONG_HSTCP=m
> CONFIG_TCP_CONG_HYBLA=m
> CONFIG_TCP_CONG_VEGAS=m
> CONFIG_TCP_CONG_SCALABLE=m
> CONFIG_TCP_CONG_LP=m
> CONFIG_TCP_CONG_VENO=m
>
> #
> # IP: Virtual Server Configuration
> #
> CONFIG_IP_VS=m
> # CONFIG_IP_VS_DEBUG is not set
> CONFIG_IP_VS_TAB_BITS=12
>
> #
> # IPVS transport protocol load balancing support
> #
> CONFIG_IP_VS_PROTO_TCP=y
> CONFIG_IP_VS_PROTO_UDP=y
> CONFIG_IP_VS_PROTO_ESP=y
> CONFIG_IP_VS_PROTO_AH=y
>
> #
> # IPVS scheduler
> #
> CONFIG_IP_VS_RR=m
> CONFIG_IP_VS_WRR=m
> CONFIG_IP_VS_LC=m
> CONFIG_IP_VS_WLC=m
> CONFIG_IP_VS_LBLC=m
> CONFIG_IP_VS_LBLCR=m
> CONFIG_IP_VS_DH=m
> CONFIG_IP_VS_SH=m
> CONFIG_IP_VS_SED=m
> CONFIG_IP_VS_NQ=m
>
> #
> # IPVS application helper
> #
> CONFIG_IP_VS_FTP=m
> CONFIG_IPV6=m
> CONFIG_IPV6_PRIVACY=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> CONFIG_INET6_XFRM_TUNNEL=m
> CONFIG_INET6_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_TRANSPORT=m
> CONFIG_INET6_XFRM_MODE_TUNNEL=m
> CONFIG_IPV6_TUNNEL=m
> # CONFIG_IPV6_SUBTREES is not set
> CONFIG_IPV6_MULTIPLE_TABLES=y
> CONFIG_IPV6_ROUTE_FWMARK=y
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_BRIDGE_NETFILTER=y
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=m
> CONFIG_NETFILTER_NETLINK_QUEUE=m
> CONFIG_NETFILTER_NETLINK_LOG=m
> CONFIG_NETFILTER_XTABLES=m
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
> CONFIG_NETFILTER_XT_TARGET_MARK=m
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
> CONFIG_NETFILTER_XT_TARGET_SECMARK=m
> CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
> CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
> CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
> CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
> CONFIG_NETFILTER_XT_MATCH_DCCP=m
> CONFIG_NETFILTER_XT_MATCH_ESP=m
> CONFIG_NETFILTER_XT_MATCH_HELPER=m
> CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> CONFIG_NETFILTER_XT_MATCH_MAC=m
> CONFIG_NETFILTER_XT_MATCH_MARK=m
> CONFIG_NETFILTER_XT_MATCH_POLICY=m
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> CONFIG_NETFILTER_XT_MATCH_REALM=m
> CONFIG_NETFILTER_XT_MATCH_SCTP=m
> CONFIG_NETFILTER_XT_MATCH_STATE=m
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> CONFIG_NETFILTER_XT_MATCH_STRING=m
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
>
> #
> # IP: Netfilter Configuration
> #
> CONFIG_IP_NF_CONNTRACK=m
> CONFIG_IP_NF_CT_ACCT=y
> CONFIG_IP_NF_CONNTRACK_MARK=y
> CONFIG_IP_NF_CONNTRACK_SECMARK=y
> CONFIG_IP_NF_CONNTRACK_EVENTS=y
> CONFIG_IP_NF_CONNTRACK_NETLINK=m
> CONFIG_IP_NF_CT_PROTO_SCTP=m
> CONFIG_IP_NF_FTP=m
> CONFIG_IP_NF_IRC=m
> CONFIG_IP_NF_NETBIOS_NS=m
> CONFIG_IP_NF_TFTP=m
> CONFIG_IP_NF_AMANDA=m
> CONFIG_IP_NF_PPTP=m
> CONFIG_IP_NF_H323=m
> CONFIG_IP_NF_SIP=m
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_IPRANGE=m
> CONFIG_IP_NF_MATCH_TOS=m
> CONFIG_IP_NF_MATCH_RECENT=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_DSCP=m
> CONFIG_IP_NF_MATCH_AH=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_MATCH_OWNER=m
> CONFIG_IP_NF_MATCH_ADDRTYPE=m
> CONFIG_IP_NF_MATCH_HASHLIMIT=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_IP_NF_TARGET_TCPMSS=m
> CONFIG_IP_NF_NAT=m
> CONFIG_IP_NF_NAT_NEEDED=y
> CONFIG_IP_NF_TARGET_MASQUERADE=m
> CONFIG_IP_NF_TARGET_REDIRECT=m
> CONFIG_IP_NF_TARGET_NETMAP=m
> CONFIG_IP_NF_TARGET_SAME=m
> CONFIG_IP_NF_NAT_SNMP_BASIC=m
> CONFIG_IP_NF_NAT_IRC=m
> CONFIG_IP_NF_NAT_FTP=m
> CONFIG_IP_NF_NAT_TFTP=m
> CONFIG_IP_NF_NAT_AMANDA=m
> CONFIG_IP_NF_NAT_PPTP=m
> CONFIG_IP_NF_NAT_H323=m
> CONFIG_IP_NF_NAT_SIP=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_TOS=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_DSCP=m
> CONFIG_IP_NF_TARGET_TTL=m
> CONFIG_IP_NF_TARGET_CLUSTERIP=m
> CONFIG_IP_NF_RAW=m
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> CONFIG_IP_NF_ARP_MANGLE=m
>
> #
> # IPv6: Netfilter Configuration (EXPERIMENTAL)
> #
> CONFIG_IP6_NF_QUEUE=m
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_RT=m
> CONFIG_IP6_NF_MATCH_OPTS=m
> CONFIG_IP6_NF_MATCH_FRAG=m
> CONFIG_IP6_NF_MATCH_HL=m
> CONFIG_IP6_NF_MATCH_OWNER=m
> CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> CONFIG_IP6_NF_MATCH_AH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_TARGET_REJECT=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_TARGET_HL=m
> CONFIG_IP6_NF_RAW=m
>
> #
> # Bridge: Netfilter Configuration
> #
> CONFIG_BRIDGE_NF_EBTABLES=m
> CONFIG_BRIDGE_EBT_BROUTE=m
> CONFIG_BRIDGE_EBT_T_FILTER=m
> CONFIG_BRIDGE_EBT_T_NAT=m
> CONFIG_BRIDGE_EBT_802_3=m
> CONFIG_BRIDGE_EBT_AMONG=m
> CONFIG_BRIDGE_EBT_ARP=m
> CONFIG_BRIDGE_EBT_IP=m
> CONFIG_BRIDGE_EBT_LIMIT=m
> CONFIG_BRIDGE_EBT_MARK=m
> CONFIG_BRIDGE_EBT_PKTTYPE=m
> CONFIG_BRIDGE_EBT_STP=m
> CONFIG_BRIDGE_EBT_VLAN=m
> CONFIG_BRIDGE_EBT_ARPREPLY=m
> CONFIG_BRIDGE_EBT_DNAT=m
> CONFIG_BRIDGE_EBT_MARK_T=m
> CONFIG_BRIDGE_EBT_REDIRECT=m
> CONFIG_BRIDGE_EBT_SNAT=m
> CONFIG_BRIDGE_EBT_LOG=m
> CONFIG_BRIDGE_EBT_ULOG=m
>
> #
> # DCCP Configuration (EXPERIMENTAL)
> #
> CONFIG_IP_DCCP=m
> CONFIG_INET_DCCP_DIAG=m
> CONFIG_IP_DCCP_ACKVEC=y
>
> #
> # DCCP CCIDs Configuration (EXPERIMENTAL)
> #
> CONFIG_IP_DCCP_CCID2=m
> CONFIG_IP_DCCP_CCID3=m
> CONFIG_IP_DCCP_TFRC_LIB=m
>
> #
> # DCCP Kernel Hacking
> #
> # CONFIG_IP_DCCP_DEBUG is not set
>
> #
> # SCTP Configuration (EXPERIMENTAL)
> #
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=y
>
> #
> # TIPC Configuration (EXPERIMENTAL)
> #
> CONFIG_TIPC=m
> # CONFIG_TIPC_ADVANCED is not set
> # CONFIG_TIPC_DEBUG is not set
> CONFIG_ATM=m
> CONFIG_ATM_CLIP=m
> # CONFIG_ATM_CLIP_NO_ICMP is not set
> CONFIG_ATM_LANE=m
> # CONFIG_ATM_MPOA is not set
> CONFIG_ATM_BR2684=m
> # CONFIG_ATM_BR2684_IPFILTER is not set
> CONFIG_BRIDGE=m
> CONFIG_VLAN_8021Q=m
> # CONFIG_DECNET is not set
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
>
> #
> # QoS and/or fair queueing
> #
> CONFIG_NET_SCHED=y
> # CONFIG_NET_SCH_CLK_JIFFIES is not set
> CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
> # CONFIG_NET_SCH_CLK_CPU is not set
>
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_HFSC=m
> CONFIG_NET_SCH_ATM=m
> CONFIG_NET_SCH_PRIO=m
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_NETEM=m
> CONFIG_NET_SCH_INGRESS=m
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=m
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=m
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=m
> CONFIG_NET_EMATCH_TEXT=m
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=m
> CONFIG_NET_ACT_GACT=m
> CONFIG_GACT_PROB=y
> CONFIG_NET_ACT_MIRRED=m
> CONFIG_NET_ACT_IPT=m
> CONFIG_NET_ACT_PEDIT=m
> CONFIG_NET_ACT_SIMP=m
> CONFIG_NET_CLS_IND=y
> CONFIG_NET_ESTIMATOR=y
>
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=m
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_IRDA is not set
> CONFIG_BT=m
> CONFIG_BT_L2CAP=m
> CONFIG_BT_SCO=m
> CONFIG_BT_RFCOMM=m
> CONFIG_BT_RFCOMM_TTY=y
> CONFIG_BT_BNEP=m
> CONFIG_BT_BNEP_MC_FILTER=y
> CONFIG_BT_BNEP_PROTO_FILTER=y
> CONFIG_BT_CMTP=m
> CONFIG_BT_HIDP=m
>
> #
> # Bluetooth device drivers
> #
> CONFIG_BT_HCIUSB=m
> CONFIG_BT_HCIUSB_SCO=y
> CONFIG_BT_HCIUART=m
> CONFIG_BT_HCIUART_H4=y
> CONFIG_BT_HCIUART_BCSP=y
> CONFIG_BT_HCIBCM203X=m
> CONFIG_BT_HCIBPA10X=m
> CONFIG_BT_HCIBFUSB=m
> CONFIG_BT_HCIDTL1=m
> CONFIG_BT_HCIBT3C=m
> CONFIG_BT_HCIBLUECARD=m
> CONFIG_BT_HCIBTUART=m
> CONFIG_BT_HCIVHCI=m
> CONFIG_TUX=m
>
> #
> # TUX options
> #
> CONFIG_TUX_EXTCGI=y
> CONFIG_TUX_EXTENDED_LOG=y
> # CONFIG_TUX_DEBUG is not set
> CONFIG_NETLABEL=y
> CONFIG_FIB_RULES=y
>
> #
> # Wireless
> #
> CONFIG_CFG80211=m
> CONFIG_NL80211=y
> CONFIG_WIRELESS_EXT=y
> CONFIG_NET_WIRELESS_RTNETLINK=y
> CONFIG_MAC80211=m
> CONFIG_MAC80211_RCSIMPLE=y
> CONFIG_MAC80211_LEDS=y
> # CONFIG_MAC80211_DEBUGFS is not set
> # CONFIG_MAC80211_DEBUG is not set
> CONFIG_IEEE80211=m
> # CONFIG_IEEE80211_DEBUG is not set
> CONFIG_IEEE80211_CRYPT_WEP=m
> CONFIG_IEEE80211_CRYPT_CCMP=m
> CONFIG_IEEE80211_CRYPT_TKIP=m
> CONFIG_IEEE80211_SOFTMAC=m
> CONFIG_IEEE80211_SOFTMAC_DEBUG=y
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
>
> #
> # Connector - unified userspace <-> kernelspace linker
> #
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
>
> #
> # Memory Technology Devices (MTD)
> #
> CONFIG_MTD=m
> # CONFIG_MTD_DEBUG is not set
> CONFIG_MTD_CONCAT=m
> CONFIG_MTD_PARTITIONS=y
> CONFIG_MTD_REDBOOT_PARTS=m
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> CONFIG_MTD_CMDLINE_PARTS=y
>
> #
> # User Modules And Translation Layers
> #
> CONFIG_MTD_CHAR=m
> CONFIG_MTD_BLOCK=m
> CONFIG_MTD_BLOCK_RO=m
> CONFIG_FTL=m
> CONFIG_NFTL=m
> CONFIG_NFTL_RW=y
> # CONFIG_INFTL is not set
> CONFIG_RFD_FTL=m
>
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=m
> CONFIG_MTD_JEDECPROBE=m
> CONFIG_MTD_GEN_PROBE=m
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> CONFIG_MTD_CFI_INTELEXT=m
> CONFIG_MTD_CFI_AMDSTD=m
> CONFIG_MTD_CFI_STAA=m
> CONFIG_MTD_CFI_UTIL=m
> CONFIG_MTD_RAM=m
> CONFIG_MTD_ROM=m
> CONFIG_MTD_ABSENT=m
> # CONFIG_MTD_OBSOLETE_CHIPS is not set
>
> #
> # Mapping drivers for chip access
> #
> # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> # CONFIG_MTD_PHYSMAP is not set
> # CONFIG_MTD_PNC2000 is not set
> CONFIG_MTD_SC520CDP=m
> CONFIG_MTD_NETSC520=m
> CONFIG_MTD_TS5500=m
> # CONFIG_MTD_AMD76XROM is not set
> # CONFIG_MTD_ICHXROM is not set
> CONFIG_MTD_SCB2_FLASH=m
> # CONFIG_MTD_NETtel is not set
> # CONFIG_MTD_DILNETPC is not set
> # CONFIG_MTD_L440GX is not set
> # CONFIG_MTD_PLATRAM is not set
>
> #
> # Self-contained MTD device drivers
> #
> # CONFIG_MTD_PMC551 is not set
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> CONFIG_MTD_MTDRAM=m
> CONFIG_MTDRAM_TOTAL_SIZE=4096
> CONFIG_MTDRAM_ERASE_SIZE=128
> CONFIG_MTD_BLOCK2MTD=m
>
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOC2001PLUS is not set
>
> #
> # NAND Flash Device Drivers
> #
> CONFIG_MTD_NAND=m
> # CONFIG_MTD_NAND_VERIFY_WRITE is not set
> CONFIG_MTD_NAND_ECC_SMC=y
> CONFIG_MTD_NAND_IDS=m
> CONFIG_MTD_NAND_DISKONCHIP=m
> # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
> CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
> # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
> CONFIG_MTD_NAND_NANDSIM=m
>
> #
> # OneNAND Flash Device Drivers
> #
> # CONFIG_MTD_ONENAND is not set
>
> #
> # Parallel port support
> #
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_SERIAL=m
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> CONFIG_PARPORT_PC_PCMCIA=m
> CONFIG_PARPORT_NOT_PC=y
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_AX88796 is not set
> CONFIG_PARPORT_1284=y
>
> #
> # Plug and Play support
> #
> CONFIG_PNP=y
> # CONFIG_PNP_DEBUG is not set
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=m
> CONFIG_PARIDE=m
> CONFIG_PARIDE_PARPORT=m
>
> #
> # Parallel IDE high-level drivers
> #
> CONFIG_PARIDE_PD=m
> CONFIG_PARIDE_PCD=m
> CONFIG_PARIDE_PF=m
> CONFIG_PARIDE_PT=m
> CONFIG_PARIDE_PG=m
>
> #
> # Parallel IDE protocol modules
> #
> CONFIG_PARIDE_ATEN=m
> CONFIG_PARIDE_BPCK=m
> CONFIG_PARIDE_COMM=m
> CONFIG_PARIDE_DSTR=m
> CONFIG_PARIDE_FIT2=m
> CONFIG_PARIDE_FIT3=m
> CONFIG_PARIDE_EPAT=m
> CONFIG_PARIDE_EPATC8=y
> CONFIG_PARIDE_EPIA=m
> CONFIG_PARIDE_FRIQ=m
> CONFIG_PARIDE_FRPW=m
> CONFIG_PARIDE_KBIC=m
> CONFIG_PARIDE_KTTI=m
> CONFIG_PARIDE_ON20=m
> CONFIG_PARIDE_ON26=m
> CONFIG_BLK_CPQ_DA=m
> CONFIG_BLK_CPQ_CISS_DA=m
> CONFIG_CISS_SCSI_TAPE=y
> CONFIG_BLK_DEV_DAC960=m
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_CRYPTOLOOP=m
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_SX8=m
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> CONFIG_BLK_DEV_RAM_BLOCKSIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_CDROM_PKTCDVD=m
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> CONFIG_ATA_OVER_ETH=m
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> CONFIG_IDE=y
> CONFIG_BLK_DEV_IDE=y
>
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_IDE_SATA is not set
> # CONFIG_BLK_DEV_HD_IDE is not set
> CONFIG_BLK_DEV_IDEDISK=y
> CONFIG_IDEDISK_MULTI_MODE=y
> CONFIG_BLK_DEV_IDECS=m
> CONFIG_BLK_DEV_IDECD=m
> # CONFIG_BLK_DEV_IDETAPE is not set
> CONFIG_BLK_DEV_IDEFLOPPY=y
> CONFIG_BLK_DEV_IDESCSI=m
> CONFIG_IDE_TASK_IOCTL=y
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPNP=y
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
> CONFIG_IDEDMA_PCI_AUTO=y
> # CONFIG_IDEDMA_ONLYDISK is not set
> CONFIG_BLK_DEV_AEC62XX=y
> CONFIG_BLK_DEV_ALI15X3=y
> # CONFIG_WDC_ALI15X3 is not set
> CONFIG_BLK_DEV_AMD74XX=y
> CONFIG_BLK_DEV_ATIIXP=y
> CONFIG_BLK_DEV_CMD64X=y
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CY82C693 is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> CONFIG_BLK_DEV_HPT34X=y
> # CONFIG_HPT34X_AUTODMA is not set
> CONFIG_BLK_DEV_HPT366=y
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> CONFIG_BLK_DEV_IT821X=y
> # CONFIG_BLK_DEV_NS87415 is not set
> CONFIG_BLK_DEV_PDC202XX_OLD=y
> # CONFIG_PDC202XX_BURST is not set
> CONFIG_BLK_DEV_PDC202XX_NEW=y
> CONFIG_BLK_DEV_SVWKS=y
> CONFIG_BLK_DEV_SIIMAGE=y
> CONFIG_BLK_DEV_SIS5513=y
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> # CONFIG_IDE_ARM is not set
> CONFIG_BLK_DEV_IDEDMA=y
> # CONFIG_IDEDMA_IVB is not set
> CONFIG_IDEDMA_AUTO=y
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI device support
> #
> CONFIG_RAID_ATTRS=m
> CONFIG_SCSI=m
> CONFIG_SCSI_NETLINK=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=m
> CONFIG_CHR_DEV_ST=m
> CONFIG_CHR_DEV_OSST=m
> CONFIG_BLK_DEV_SR=m
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=m
> CONFIG_CHR_DEV_SCH=m
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
>
> #
> # SCSI Transport
> #
> CONFIG_SCSI_SPI_ATTRS=m
> CONFIG_SCSI_FC_ATTRS=m
> CONFIG_SCSI_ISCSI_ATTRS=m
> CONFIG_SCSI_SAS_ATTRS=m
> CONFIG_SCSI_SAS_LIBSAS=m
> CONFIG_SCSI_SAS_ATA=y
> # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
>
> #
> # SCSI low-level drivers
> #
> CONFIG_ISCSI_TCP=m
> CONFIG_BLK_DEV_3W_XXXX_RAID=m
> CONFIG_SCSI_3W_9XXX=m
> CONFIG_SCSI_ACARD=m
> CONFIG_SCSI_AACRAID=m
> CONFIG_SCSI_AIC7XXX=m
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC7XXX_OLD=m
> CONFIG_SCSI_AIC79XX=m
> CONFIG_AIC79XX_CMDS_PER_DEVICE=4
> CONFIG_AIC79XX_RESET_DELAY_MS=15000
> # CONFIG_AIC79XX_ENABLE_RD_STRM is not set
> # CONFIG_AIC79XX_DEBUG_ENABLE is not set
> CONFIG_AIC79XX_DEBUG_MASK=0
> # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC94XX=m
> # CONFIG_AIC94XX_DEBUG is not set
> CONFIG_SCSI_ARCMSR=m
> CONFIG_MEGARAID_NEWGEN=y
> CONFIG_MEGARAID_MM=m
> CONFIG_MEGARAID_MAILBOX=m
> CONFIG_MEGARAID_LEGACY=m
> CONFIG_MEGARAID_SAS=m
> CONFIG_SCSI_HPTIOP=m
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> CONFIG_SCSI_GDTH=m
> CONFIG_SCSI_IPS=m
> CONFIG_SCSI_INITIO=m
> # CONFIG_SCSI_INIA100 is not set
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> # CONFIG_SCSI_IZIP_EPP16 is not set
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> CONFIG_SCSI_STEX=m
> CONFIG_SCSI_SYM53C8XX_2=m
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> CONFIG_SCSI_SYM53C8XX_MMIO=y
> # CONFIG_SCSI_IPR is not set
> CONFIG_SCSI_QLOGIC_1280=m
> CONFIG_SCSI_QLA_FC=m
> CONFIG_SCSI_QLA_ISCSI=m
> CONFIG_SCSI_LPFC=m
> CONFIG_SCSI_DC395x=m
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
>
> #
> # PCMCIA SCSI adapter support
> #
> # CONFIG_PCMCIA_FDOMAIN is not set
> # CONFIG_PCMCIA_QLOGIC is not set
> # CONFIG_PCMCIA_SYM53C500 is not set
> CONFIG_ATA=m
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_AHCI=m
> CONFIG_SATA_SVW=m
> CONFIG_ATA_PIIX=m
> CONFIG_SATA_MV=m
> CONFIG_SATA_NV=m
> CONFIG_PDC_ADMA=m
> CONFIG_SATA_QSTOR=m
> CONFIG_SATA_PROMISE=m
> CONFIG_SATA_SX4=m
> CONFIG_SATA_SIL=m
> CONFIG_SATA_SIL24=m
> CONFIG_SATA_SIS=m
> CONFIG_SATA_ULI=m
> CONFIG_SATA_VIA=m
> CONFIG_SATA_VITESSE=m
> CONFIG_SATA_INIC162X=m
> # CONFIG_PATA_ACPI is not set
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> CONFIG_PATA_MARVELL=m
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PCMCIA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> CONFIG_PATA_PDC2027X=m
> # CONFIG_PATA_SIL680 is not set
> CONFIG_PATA_SIS=m
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> CONFIG_ATA_INTEL_COMBINED=y
>
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_LINEAR=m
> CONFIG_MD_RAID0=m
> CONFIG_MD_RAID1=m
> CONFIG_MD_RAID10=m
> CONFIG_MD_RAID456=m
> CONFIG_MD_RAID5_RESHAPE=y
> CONFIG_MD_MULTIPATH=m
> CONFIG_MD_FAULTY=m
> CONFIG_BLK_DEV_DM=m
> CONFIG_DM_CRYPT=m
> CONFIG_DM_SNAPSHOT=m
> CONFIG_DM_MIRROR=m
> CONFIG_DM_ZERO=m
> CONFIG_DM_MULTIPATH=m
> CONFIG_DM_MULTIPATH_EMC=m
> CONFIG_DM_MULTIPATH_RDAC=m
> CONFIG_DM_MULTIPATH_HP=m
> CONFIG_DM_UEVENT=y
>
> #
> # Fusion MPT device support
> #
> CONFIG_FUSION=y
> CONFIG_FUSION_SPI=m
> CONFIG_FUSION_FC=m
> CONFIG_FUSION_SAS=m
> CONFIG_FUSION_MAX_SGE=128
> CONFIG_FUSION_CTL=m
> CONFIG_FUSION_LAN=m
> CONFIG_FUSION_LOGGING=y
> CONFIG_FIREWIRE=m
> CONFIG_FIREWIRE_OHCI=m
> CONFIG_FIREWIRE_SBP2=m
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
> CONFIG_I2O=m
> # CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
> CONFIG_I2O_EXT_ADAPTEC=y
> CONFIG_I2O_EXT_ADAPTEC_DMA64=y
> CONFIG_I2O_CONFIG=m
> CONFIG_I2O_CONFIG_OLD_IOCTL=y
> CONFIG_I2O_BUS=m
> CONFIG_I2O_BLOCK=m
> CONFIG_I2O_SCSI=m
> CONFIG_I2O_PROC=m
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> CONFIG_IFB=m
> CONFIG_DUMMY=m
> CONFIG_BONDING=m
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_NET_SB1000 is not set
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
>
> #
> # PHY device support
> #
> CONFIG_PHYLIB=m
>
> #
> # MII PHY device drivers
> #
> CONFIG_MARVELL_PHY=m
> CONFIG_DAVICOM_PHY=m
> CONFIG_QSEMI_PHY=m
> CONFIG_LXT_PHY=m
> CONFIG_CICADA_PHY=m
> CONFIG_VITESSE_PHY=m
> CONFIG_SMSC_PHY=m
> CONFIG_FIXED_PHY=m
> CONFIG_FIXED_MII_10_FDX=y
> CONFIG_FIXED_MII_100_FDX=y
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=m
> CONFIG_HAPPYMEAL=m
> CONFIG_SUNGEM=m
> CONFIG_CASSINI=m
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=m
> CONFIG_TYPHOON=m
>
> #
> # Tulip family network device support
> #
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=m
> CONFIG_TULIP=m
> # CONFIG_TULIP_MWI is not set
> CONFIG_TULIP_MMIO=y
> # CONFIG_TULIP_NAPI is not set
> CONFIG_DE4X5=m
> CONFIG_WINBOND_840=m
> CONFIG_DM9102=m
> CONFIG_ULI526X=m
> CONFIG_PCMCIA_XIRCOM=m
> # CONFIG_HP100 is not set
> CONFIG_NET_PCI=y
> CONFIG_PCNET32=m
> CONFIG_AMD8111_ETH=m
> CONFIG_AMD8111E_NAPI=y
> CONFIG_ADAPTEC_STARFIRE=m
> CONFIG_ADAPTEC_STARFIRE_NAPI=y
> CONFIG_B44=m
> CONFIG_FORCEDETH=m
> # CONFIG_DGRS is not set
> # CONFIG_EEPRO100 is not set
> CONFIG_E100=m
> CONFIG_FEALNX=m
> CONFIG_NATSEMI=m
> CONFIG_NE2K_PCI=m
> CONFIG_8139CP=m
> CONFIG_8139TOO=m
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> CONFIG_8139TOO_8129=y
> # CONFIG_8139_OLD_RX_RESET is not set
> CONFIG_SIS900=m
> CONFIG_EPIC100=m
> CONFIG_SUNDANCE=m
> # CONFIG_SUNDANCE_MMIO is not set
> CONFIG_VIA_RHINE=m
> CONFIG_VIA_RHINE_MMIO=y
> CONFIG_VIA_RHINE_NAPI=y
> CONFIG_NET_POCKET=y
> # CONFIG_ATP is not set
> # CONFIG_DE600 is not set
> # CONFIG_DE620 is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> CONFIG_ACENIC=m
> # CONFIG_ACENIC_OMIT_TIGON_I is not set
> CONFIG_DL2K=m
> CONFIG_E1000=m
> CONFIG_E1000_NAPI=y
> # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
> CONFIG_E1000E=m
> CONFIG_IGB=m
> CONFIG_NS83820=m
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> CONFIG_R8169=m
> CONFIG_R8169_NAPI=y
> CONFIG_R8169_VLAN=y
> CONFIG_SIS190=m
> CONFIG_SKGE=m
> CONFIG_SKY2=m
> # CONFIG_SK98LIN is not set
> CONFIG_VIA_VELOCITY=m
> CONFIG_TIGON3=m
> CONFIG_BNX2=m
> CONFIG_QLA3XXX=m
>
> #
> # Ethernet (10000 Mbit)
> #
> CONFIG_CHELSIO_T1=m
> CONFIG_CHELSIO_T3=m
> CONFIG_IXGBE=m
> CONFIG_IXGB=m
> CONFIG_IXGB_NAPI=y
> CONFIG_S2IO=m
> CONFIG_S2IO_NAPI=y
> CONFIG_MYRI10GE=m
> CONFIG_NETXEN_NIC=m
> CONFIG_BNX2X=m
> CONFIG_MLX4_CORE=m
> CONFIG_MLX4_DEBUG=y
>
> #
> # Token Ring devices
> #
> CONFIG_TR=y
> CONFIG_IBMOL=m
> CONFIG_3C359=m
> # CONFIG_TMS380TR is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> CONFIG_NET_RADIO=y
>
> #
> # Obsolete Wireless cards support (pre-802.11)
> #
> # CONFIG_STRIP is not set
> CONFIG_PCMCIA_WAVELAN=m
> CONFIG_PCMCIA_NETWAVE=m
>
> #
> # Wireless 802.11 Frequency Hopping cards support
> #
> # CONFIG_PCMCIA_RAYCS is not set
>
> #
> # Wireless 802.11b ISA/PCI cards support
> #
> CONFIG_IPW2100=m
> CONFIG_IPW2100_MONITOR=y
> # CONFIG_IPW2100_DEBUG is not set
> CONFIG_IPW2200=m
> CONFIG_IPW2200_MONITOR=y
> CONFIG_IPW2200_RADIOTAP=y
> CONFIG_IPW2200_PROMISCUOUS=y
> CONFIG_IPW2200_QOS=y
> # CONFIG_IPW2200_DEBUG is not set
> CONFIG_AIRO=m
> CONFIG_HERMES=m
> CONFIG_PLX_HERMES=m
> CONFIG_TMD_HERMES=m
> CONFIG_NORTEL_HERMES=m
> CONFIG_PCI_HERMES=m
> CONFIG_ATMEL=m
> CONFIG_PCI_ATMEL=m
>
> #
> # Wireless 802.11b Pcmcia/Cardbus cards support
> #
> CONFIG_PCMCIA_HERMES=m
> CONFIG_PCMCIA_SPECTRUM=m
> CONFIG_AIRO_CS=m
> CONFIG_PCMCIA_ATMEL=m
> CONFIG_PCMCIA_WL3501=m
>
> #
> # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
> #
> CONFIG_PRISM54=m
> CONFIG_USB_ZD1201=m
> CONFIG_HOSTAP=m
> CONFIG_HOSTAP_FIRMWARE=y
> CONFIG_HOSTAP_FIRMWARE_NVRAM=y
> CONFIG_HOSTAP_PLX=m
> CONFIG_HOSTAP_PCI=m
> CONFIG_HOSTAP_CS=m
> CONFIG_BCM43XX=m
> CONFIG_BCM43XX_DEBUG=y
> CONFIG_BCM43XX_DMA=y
> CONFIG_BCM43XX_PIO=y
> CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
> # CONFIG_BCM43XX_DMA_MODE is not set
> # CONFIG_BCM43XX_PIO_MODE is not set
> CONFIG_ZD1211RW=m
> # CONFIG_ZD1211RW_DEBUG is not set
> CONFIG_NET_WIRELESS=y
> CONFIG_IWL4965=m
> CONFIG_IWL4965_QOS=y
> CONFIG_IWL4965_SPECTRUM_MEASUREMENT=y
> CONFIG_IWL4965_SENSITIVITY=y
> # CONFIG_IWL4965_DEBUG is not set
> # CONFIG_IWL3945 is not set
>
> #
> # PCMCIA network device support
> #
> CONFIG_NET_PCMCIA=y
> CONFIG_PCMCIA_3C589=m
> CONFIG_PCMCIA_3C574=m
> CONFIG_PCMCIA_FMVJ18X=m
> CONFIG_PCMCIA_PCNET=m
> CONFIG_PCMCIA_NMCLAN=m
> CONFIG_PCMCIA_SMC91C92=m
> CONFIG_PCMCIA_XIRC2PS=m
> CONFIG_PCMCIA_AXNET=m
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # ATM drivers
> #
> # CONFIG_ATM_DUMMY is not set
> CONFIG_ATM_TCP=m
> CONFIG_ATM_LANAI=m
> CONFIG_ATM_ENI=m
> # CONFIG_ATM_ENI_DEBUG is not set
> # CONFIG_ATM_ENI_TUNE_BURST is not set
> CONFIG_ATM_FIRESTREAM=m
> # CONFIG_ATM_ZATM is not set
> CONFIG_ATM_IDT77252=m
> # CONFIG_ATM_IDT77252_DEBUG is not set
> # CONFIG_ATM_IDT77252_RCV_ALL is not set
> CONFIG_ATM_IDT77252_USE_SUNI=y
> CONFIG_ATM_AMBASSADOR=m
> # CONFIG_ATM_AMBASSADOR_DEBUG is not set
> CONFIG_ATM_HORIZON=m
> # CONFIG_ATM_HORIZON_DEBUG is not set
> CONFIG_ATM_FORE200E_MAYBE=m
> # CONFIG_ATM_FORE200E_PCA is not set
> CONFIG_ATM_HE=m
> # CONFIG_ATM_HE_USE_SUNI is not set
> CONFIG_FDDI=y
> # CONFIG_DEFXX is not set
> # CONFIG_SKFP is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> # CONFIG_PPP_BSDCOMP is not set
> CONFIG_PPP_MPPE=m
> CONFIG_PPPOE=m
> CONFIG_PPPOATM=m
> CONFIG_SLIP=m
> CONFIG_SLIP_COMPRESSED=y
> CONFIG_SLIP_SMART=y
> # CONFIG_SLIP_MODE_SLIP6 is not set
> CONFIG_NET_FC=y
> # CONFIG_SHAPER is not set
> CONFIG_NETCONSOLE=m
> CONFIG_NETPOLL=y
> # CONFIG_NETPOLL_RX is not set
> CONFIG_NETPOLL_TRAP=y
> CONFIG_NET_POLL_CONTROLLER=y
>
> #
> # ISDN subsystem
> #
> CONFIG_ISDN=m
>
> #
> # Old ISDN4Linux
> #
> CONFIG_ISDN_I4L=m
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> CONFIG_IPPP_FILTER=y
> # CONFIG_ISDN_PPP_BSDCOMP is not set
> CONFIG_ISDN_AUDIO=y
> CONFIG_ISDN_TTY_FAX=y
>
> #
> # ISDN feature submodules
> #
> CONFIG_ISDN_DIVERSION=m
>
> #
> # ISDN4Linux hardware drivers
> #
>
> #
> # Passive cards
> #
> CONFIG_ISDN_DRV_HISAX=m
>
> #
> # D-channel protocol features
> #
> CONFIG_HISAX_EURO=y
> CONFIG_DE_AOC=y
> CONFIG_HISAX_NO_SENDCOMPLETE=y
> CONFIG_HISAX_NO_LLC=y
> CONFIG_HISAX_NO_KEYPAD=y
> CONFIG_HISAX_1TR6=y
> CONFIG_HISAX_NI1=y
> CONFIG_HISAX_MAX_CARDS=8
>
> #
> # HiSax supported cards
> #
> CONFIG_HISAX_16_3=y
> CONFIG_HISAX_TELESPCI=y
> CONFIG_HISAX_S0BOX=y
> CONFIG_HISAX_FRITZPCI=y
> CONFIG_HISAX_AVM_A1_PCMCIA=y
> CONFIG_HISAX_ELSA=y
> CONFIG_HISAX_DIEHLDIVA=y
> CONFIG_HISAX_SEDLBAUER=y
> CONFIG_HISAX_NETJET=y
> CONFIG_HISAX_NETJET_U=y
> CONFIG_HISAX_NICCY=y
> CONFIG_HISAX_BKM_A4T=y
> CONFIG_HISAX_SCT_QUADRO=y
> CONFIG_HISAX_GAZEL=y
> CONFIG_HISAX_HFC_PCI=y
> CONFIG_HISAX_W6692=y
> CONFIG_HISAX_HFC_SX=y
> CONFIG_HISAX_ENTERNOW_PCI=y
> # CONFIG_HISAX_DEBUG is not set
>
> #
> # HiSax PCMCIA card service modules
> #
> CONFIG_HISAX_SEDLBAUER_CS=m
> CONFIG_HISAX_ELSA_CS=m
> CONFIG_HISAX_AVM_A1_CS=m
> CONFIG_HISAX_TELES_CS=m
>
> #
> # HiSax sub driver modules
> #
> CONFIG_HISAX_ST5481=m
> # CONFIG_HISAX_HFCUSB is not set
> CONFIG_HISAX_HFC4S8S=m
> CONFIG_HISAX_FRITZ_PCIPNP=m
> CONFIG_HISAX_HDLC=y
>
> #
> # Active cards
> #
>
> #
> # Siemens Gigaset
> #
> CONFIG_ISDN_DRV_GIGASET=m
> CONFIG_GIGASET_BASE=m
> CONFIG_GIGASET_M105=m
> # CONFIG_GIGASET_DEBUG is not set
> # CONFIG_GIGASET_UNDOCREQ is not set
>
> #
> # CAPI subsystem
> #
> CONFIG_ISDN_CAPI=m
> CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
> CONFIG_ISDN_CAPI_MIDDLEWARE=y
> CONFIG_ISDN_CAPI_CAPI20=m
> CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
> CONFIG_ISDN_CAPI_CAPIFS=m
> CONFIG_ISDN_CAPI_CAPIDRV=m
>
> #
> # CAPI hardware drivers
> #
>
> #
> # Active AVM cards
> #
> CONFIG_CAPI_AVM=y
> CONFIG_ISDN_DRV_AVMB1_B1PCI=m
> CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
> CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
> CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
> CONFIG_ISDN_DRV_AVMB1_T1PCI=m
> CONFIG_ISDN_DRV_AVMB1_C4=m
>
> #
> # Active Eicon DIVA Server cards
> #
> # CONFIG_CAPI_EICON is not set
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> # CONFIG_INPUT_TSDEV is not set
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_SERIAL=m
> CONFIG_MOUSE_VSXXXAA=m
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_ANALOG is not set
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GRIP_MP is not set
> # CONFIG_JOYSTICK_GUILLEMOT is not set
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> CONFIG_JOYSTICK_TWIDJOY=m
> # CONFIG_JOYSTICK_DB9 is not set
> # CONFIG_JOYSTICK_GAMECON is not set
> # CONFIG_JOYSTICK_TURBOGRAFX is not set
> CONFIG_JOYSTICK_JOYDUMP=m
> CONFIG_INPUT_TOUCHSCREEN=y
> CONFIG_TOUCHSCREEN_GUNZE=m
> CONFIG_TOUCHSCREEN_ELO=m
> CONFIG_TOUCHSCREEN_MTOUCH=m
> CONFIG_TOUCHSCREEN_MK712=m
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=m
> CONFIG_INPUT_UINPUT=m
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=m
> CONFIG_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> CONFIG_GAMEPORT_L4=m
> CONFIG_GAMEPORT_EMU10K1=m
> CONFIG_GAMEPORT_FM801=m
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> CONFIG_CYCLADES=m
> # CONFIG_CYZ_INTR is not set
> # CONFIG_DIGIEPCA is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_ISI is not set
> CONFIG_SYNCLINK=m
> CONFIG_SYNCLINKMP=m
> CONFIG_SYNCLINK_GT=m
> CONFIG_N_HDLC=m
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> # CONFIG_RIO is not set
> # CONFIG_STALDRV is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_CS=m
> CONFIG_SERIAL_8250_NR_UARTS=32
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_JSM=m
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_CRASH=m
> CONFIG_PRINTER=m
> CONFIG_LP_CONSOLE=y
> CONFIG_PPDEV=m
> # CONFIG_TIPAR is not set
>
> #
> # IPMI
> #
> CONFIG_IPMI_HANDLER=m
> CONFIG_IPMI_PANIC_EVENT=y
> CONFIG_IPMI_PANIC_STRING=y
> CONFIG_IPMI_DEVICE_INTERFACE=m
> CONFIG_IPMI_SI=m
> CONFIG_IPMI_WATCHDOG=m
> CONFIG_IPMI_POWEROFF=m
>
> #
> # Watchdog Cards
> #
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> CONFIG_SOFT_WATCHDOG=m
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> CONFIG_ALIM1535_WDT=m
> CONFIG_ALIM7101_WDT=m
> # CONFIG_SC520_WDT is not set
> # CONFIG_EUROTECH_WDT is not set
> # CONFIG_IB700_WDT is not set
> CONFIG_IBMASR=m
> # CONFIG_WAFER_WDT is not set
> CONFIG_I6300ESB_WDT=m
> CONFIG_I8XX_TCO=m
> # CONFIG_HP_WATCHDOG is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_CPU5_WDT is not set
> CONFIG_W83627HF_WDT=m
> CONFIG_W83877F_WDT=m
> CONFIG_W83977F_WDT=m
> CONFIG_MACHZ_WDT=m
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
>
> #
> # PCI-based Watchdog Cards
> #
> CONFIG_PCIPCWATCHDOG=m
> CONFIG_WDTPCI=m
> CONFIG_WDT_501_PCI=y
>
> #
> # USB-based Watchdog Cards
> #
> CONFIG_USBPCWATCHDOG=m
> CONFIG_HW_RANDOM=y
> CONFIG_HW_RANDOM_INTEL=m
> CONFIG_HW_RANDOM_AMD=m
> # CONFIG_HW_RANDOM_GEODE is not set
> CONFIG_NVRAM=y
> CONFIG_RTC=y
> CONFIG_DTLK=m
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> CONFIG_AGP_SIS=y
> CONFIG_AGP_VIA=y
> CONFIG_DRM=m
> # CONFIG_DRM_TDFX is not set
> CONFIG_DRM_R128=m
> CONFIG_DRM_RADEON=m
> CONFIG_DRM_I810=m
> CONFIG_DRM_I830=m
> CONFIG_DRM_I915=m
> CONFIG_DRM_MGA=m
> # CONFIG_DRM_SIS is not set
> CONFIG_DRM_VIA=m
> CONFIG_DRM_SAVAGE=m
>
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> CONFIG_CARDMAN_4000=m
> CONFIG_CARDMAN_4040=m
> # CONFIG_MWAVE is not set
> CONFIG_PC8736x_GPIO=m
> CONFIG_NSC_GPIO=m
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=8192
> CONFIG_HPET=y
> # CONFIG_HPET_RTC_IRQ is not set
> # CONFIG_HPET_MMAP is not set
> CONFIG_HANGCHECK_TIMER=m
> CONFIG_TCG_TPM=m
> CONFIG_TCG_TIS=m
> CONFIG_TCG_NSC=m
> CONFIG_TCG_ATMEL=m
> CONFIG_TCG_INFINEON=m
> CONFIG_TELCLOCK=m
>
> #
> # I2C support
> #
> CONFIG_I2C=m
> CONFIG_I2C_CHARDEV=m
>
> #
> # I2C Algorithms
> #
> CONFIG_I2C_ALGOBIT=m
> CONFIG_I2C_ALGOPCF=m
> CONFIG_I2C_ALGOPCA=m
>
> #
> # I2C Hardware Bus support
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> CONFIG_I2C_AMD756=m
> CONFIG_I2C_AMD756_S4882=m
> CONFIG_I2C_AMD8111=m
> CONFIG_I2C_I801=m
> # CONFIG_I2C_I810 is not set
> CONFIG_I2C_PIIX4=m
> CONFIG_I2C_ISA=m
> CONFIG_I2C_NFORCE2=m
> # CONFIG_I2C_OCORES is not set
> CONFIG_I2C_PARPORT=m
> CONFIG_I2C_PARPORT_LIGHT=m
> CONFIG_I2C_PROSAVAGE=m
> CONFIG_I2C_SAVAGE4=m
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> CONFIG_I2C_SIS96X=m
> CONFIG_I2C_STUB=m
> CONFIG_I2C_VIA=m
> CONFIG_I2C_VIAPRO=m
> CONFIG_I2C_VOODOO3=m
> # CONFIG_I2C_PCA_ISA is not set
>
> #
> # Miscellaneous I2C Chip support
> #
> CONFIG_SENSORS_DS1337=m
> CONFIG_SENSORS_DS1374=m
> CONFIG_SENSORS_EEPROM=m
> CONFIG_SENSORS_PCF8574=m
> CONFIG_SENSORS_PCA9539=m
> CONFIG_SENSORS_PCF8591=m
> CONFIG_SENSORS_MAX6875=m
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
>
> #
> # SPI support
> #
> # CONFIG_SPI is not set
> # CONFIG_SPI_MASTER is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Hardware Monitoring support
> #
> CONFIG_HWMON=m
> CONFIG_HWMON_VID=m
> CONFIG_SENSORS_ABITUGURU=m
> CONFIG_SENSORS_ADM1021=m
> CONFIG_SENSORS_ADM1025=m
> CONFIG_SENSORS_ADM1026=m
> CONFIG_SENSORS_ADM1031=m
> CONFIG_SENSORS_ADM9240=m
> CONFIG_SENSORS_K8TEMP=m
> CONFIG_SENSORS_ASB100=m
> CONFIG_SENSORS_ATXP1=m
> CONFIG_SENSORS_DS1621=m
> CONFIG_SENSORS_F71805F=m
> CONFIG_SENSORS_FSCHER=m
> CONFIG_SENSORS_FSCPOS=m
> CONFIG_SENSORS_GL518SM=m
> CONFIG_SENSORS_GL520SM=m
> CONFIG_SENSORS_IT87=m
> CONFIG_SENSORS_LM63=m
> CONFIG_SENSORS_LM75=m
> CONFIG_SENSORS_LM77=m
> CONFIG_SENSORS_LM78=m
> CONFIG_SENSORS_LM80=m
> CONFIG_SENSORS_LM83=m
> CONFIG_SENSORS_LM85=m
> CONFIG_SENSORS_LM87=m
> CONFIG_SENSORS_LM90=m
> CONFIG_SENSORS_LM92=m
> CONFIG_SENSORS_MAX1619=m
> CONFIG_SENSORS_PC87360=m
> CONFIG_SENSORS_SIS5595=m
> CONFIG_SENSORS_SMSC47M1=m
> CONFIG_SENSORS_SMSC47M192=m
> CONFIG_SENSORS_SMSC47B397=m
> CONFIG_SENSORS_VIA686A=m
> CONFIG_SENSORS_VT8231=m
> CONFIG_SENSORS_W83781D=m
> CONFIG_SENSORS_W83791D=m
> CONFIG_SENSORS_W83792D=m
> CONFIG_SENSORS_W83L785TS=m
> CONFIG_SENSORS_W83627HF=m
> CONFIG_SENSORS_W83627EHF=m
> CONFIG_SENSORS_HDAPS=m
> # CONFIG_HWMON_DEBUG_CHIP is not set
>
> #
> # Misc devices
> #
> # CONFIG_IBM_ASM is not set
>
> #
> # Multimedia devices
> #
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L1=y
> CONFIG_VIDEO_V4L1_COMPAT=y
> CONFIG_VIDEO_V4L2=y
>
> #
> # Video Capture Adapters
> #
>
> #
> # Video Capture Adapters
> #
> # CONFIG_VIDEO_ADV_DEBUG is not set
> # CONFIG_VIDEO_VIVI is not set
> CONFIG_VIDEO_BT848=m
> CONFIG_VIDEO_SAA6588=m
> # CONFIG_VIDEO_BWQCAM is not set
> # CONFIG_VIDEO_CQCAM is not set
> # CONFIG_VIDEO_W9966 is not set
> # CONFIG_VIDEO_CPIA is not set
> CONFIG_VIDEO_CPIA2=m
> # CONFIG_VIDEO_SAA5246A is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_TUNER_3036 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_SAA7134 is not set
> # CONFIG_VIDEO_MXB is not set
> # CONFIG_VIDEO_DPC is not set
> # CONFIG_VIDEO_HEXIUM_ORION is not set
> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
> # CONFIG_VIDEO_CX88 is not set
>
> #
> # Encoders and Decoders
> #
> CONFIG_VIDEO_MSP3400=m
> CONFIG_VIDEO_CS53L32A=m
> CONFIG_VIDEO_TLV320AIC23B=m
> CONFIG_VIDEO_WM8775=m
> CONFIG_VIDEO_WM8739=m
> CONFIG_VIDEO_CX2341X=m
> CONFIG_VIDEO_CX25840=m
> CONFIG_VIDEO_SAA711X=m
> CONFIG_VIDEO_SAA7127=m
> CONFIG_VIDEO_UPD64031A=m
> CONFIG_VIDEO_UPD64083=m
>
> #
> # V4L USB devices
> #
> CONFIG_VIDEO_PVRUSB2=m
> CONFIG_VIDEO_PVRUSB2_24XXX=y
> CONFIG_VIDEO_PVRUSB2_SYSFS=y
> # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
> CONFIG_VIDEO_EM28XX=m
> CONFIG_VIDEO_USBVIDEO=m
> CONFIG_USB_VICAM=m
> CONFIG_USB_IBMCAM=m
> CONFIG_USB_KONICAWC=m
> CONFIG_USB_QUICKCAM_MESSENGER=m
> CONFIG_USB_ET61X251=m
> CONFIG_VIDEO_OVCAMCHIP=m
> CONFIG_USB_W9968CF=m
> CONFIG_USB_OV511=m
> CONFIG_USB_SE401=m
> CONFIG_USB_SN9C102=m
> CONFIG_USB_STV680=m
> CONFIG_USB_ZC0301=m
> CONFIG_USB_PWC=m
> # CONFIG_USB_PWC_DEBUG is not set
>
> #
> # Radio Adapters
> #
> # CONFIG_RADIO_GEMTEK_PCI is not set
> # CONFIG_RADIO_MAXIRADIO is not set
> # CONFIG_RADIO_MAESTRO is not set
> CONFIG_USB_DSBR=m
>
> #
> # Digital Video Broadcasting Devices
> #
> # CONFIG_DVB is not set
> CONFIG_VIDEO_TUNER=m
> CONFIG_VIDEO_BUF=m
> CONFIG_VIDEO_BTCX=m
> CONFIG_VIDEO_IR=m
> CONFIG_VIDEO_TVEEPROM=m
> CONFIG_USB_DABUSB=m
>
> #
> # Graphics support
> #
> # CONFIG_FIRMWARE_EDID is not set
> CONFIG_FB=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_MACMODES is not set
> # CONFIG_FB_BACKLIGHT is not set
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
> CONFIG_FB_CIRRUS=m
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> CONFIG_FB_VGA16=m
> CONFIG_FB_VESA=y
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> CONFIG_FB_NVIDIA=m
> CONFIG_FB_NVIDIA_I2C=y
> CONFIG_FB_RIVA=m
> # CONFIG_FB_RIVA_I2C is not set
> # CONFIG_FB_RIVA_DEBUG is not set
> CONFIG_FB_INTEL=m
> # CONFIG_FB_INTEL_DEBUG is not set
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> CONFIG_FB_SAVAGE=m
> CONFIG_FB_SAVAGE_I2C=y
> CONFIG_FB_SAVAGE_ACCEL=y
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_NEOMAGIC is not set
> CONFIG_FB_KYRO=m
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_VIRTUAL is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_VIDEO_SELECT=y
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
>
> #
> # Logo configuration
> #
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_BACKLIGHT_CLASS_DEVICE=m
> CONFIG_BACKLIGHT_DEVICE=y
> CONFIG_LCD_CLASS_DEVICE=m
> CONFIG_LCD_DEVICE=y
>
> #
> # Sound
> #
> CONFIG_SOUND=m
>
> #
> # Advanced Linux Sound Architecture
> #
> CONFIG_SND=m
> CONFIG_SND_TIMER=m
> CONFIG_SND_PCM=m
> CONFIG_SND_HWDEP=m
> CONFIG_SND_RAWMIDI=m
> CONFIG_SND_SEQUENCER=m
> CONFIG_SND_SEQ_DUMMY=m
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_RTCTIMER=m
> CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
> CONFIG_SND_DYNAMIC_MINORS=y
> # CONFIG_SND_SUPPORT_OLD_API is not set
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
>
> #
> # Generic devices
> #
> CONFIG_SND_MPU401_UART=m
> CONFIG_SND_OPL3_LIB=m
> CONFIG_SND_VX_LIB=m
> CONFIG_SND_AC97_CODEC=m
> CONFIG_SND_DUMMY=m
> CONFIG_SND_VIRMIDI=m
> CONFIG_SND_MTPAV=m
> # CONFIG_SND_MTS64 is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> CONFIG_SND_MPU401=m
> # CONFIG_SND_PORTMAN2X4 is not set
>
> #
> # PCI devices
> #
> CONFIG_SND_AD1889=m
> CONFIG_SND_ALS300=m
> CONFIG_SND_ALS4000=m
> CONFIG_SND_ALI5451=m
> CONFIG_SND_ATIIXP=m
> CONFIG_SND_ATIIXP_MODEM=m
> CONFIG_SND_AU8810=m
> CONFIG_SND_AU8820=m
> CONFIG_SND_AU8830=m
> CONFIG_SND_AZT3328=m
> CONFIG_SND_BT87X=m
> # CONFIG_SND_BT87X_OVERCLOCK is not set
> CONFIG_SND_CA0106=m
> CONFIG_SND_CMIPCI=m
> CONFIG_SND_CS4281=m
> CONFIG_SND_CS46XX=m
> CONFIG_SND_CS46XX_NEW_DSP=y
> CONFIG_SND_DARLA20=m
> CONFIG_SND_GINA20=m
> CONFIG_SND_LAYLA20=m
> CONFIG_SND_DARLA24=m
> CONFIG_SND_GINA24=m
> CONFIG_SND_LAYLA24=m
> CONFIG_SND_MONA=m
> CONFIG_SND_MIA=m
> CONFIG_SND_ECHO3G=m
> CONFIG_SND_INDIGO=m
> CONFIG_SND_INDIGOIO=m
> CONFIG_SND_INDIGODJ=m
> CONFIG_SND_EMU10K1=m
> CONFIG_SND_EMU10K1X=m
> CONFIG_SND_ENS1370=m
> CONFIG_SND_ENS1371=m
> CONFIG_SND_ES1938=m
> CONFIG_SND_ES1968=m
> CONFIG_SND_FM801=m
> CONFIG_SND_FM801_TEA575X_BOOL=y
> CONFIG_SND_FM801_TEA575X=m
> CONFIG_SND_HDA_INTEL=m
> CONFIG_SND_HDSP=m
> CONFIG_SND_HDSPM=m
> CONFIG_SND_ICE1712=m
> CONFIG_SND_ICE1724=m
> CONFIG_SND_INTEL8X0=m
> CONFIG_SND_INTEL8X0M=m
> CONFIG_SND_KORG1212=m
> CONFIG_SND_MAESTRO3=m
> CONFIG_SND_MIXART=m
> CONFIG_SND_NM256=m
> CONFIG_SND_PCXHR=m
> CONFIG_SND_RIPTIDE=m
> CONFIG_SND_RME32=m
> CONFIG_SND_RME96=m
> CONFIG_SND_RME9652=m
> CONFIG_SND_SONICVIBES=m
> CONFIG_SND_TRIDENT=m
> CONFIG_SND_VIA82XX=m
> CONFIG_SND_VIA82XX_MODEM=m
> CONFIG_SND_VX222=m
> CONFIG_SND_YMFPCI=m
> # CONFIG_SND_AC97_POWER_SAVE is not set
>
> #
> # USB devices
> #
> CONFIG_SND_USB_AUDIO=m
> CONFIG_SND_USB_USX2Y=m
>
> #
> # PCMCIA devices
> #
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_PDAUDIOCF is not set
>
> #
> # SoC audio support
> #
> # CONFIG_SND_SOC is not set
>
> #
> # Open Sound System
> #
> # CONFIG_SOUND_PRIME is not set
> CONFIG_AC97_BUS=m
>
> #
> # USB support
> #
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
>
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_EHCI_SPLIT_ISO=y
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> CONFIG_USB_ISP116X_HCD=m
> CONFIG_USB_OHCI_HCD=m
> # CONFIG_USB_OHCI_BIG_ENDIAN is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=m
> CONFIG_USB_SL811_HCD=m
> CONFIG_USB_SL811_CS=m
>
> #
> # USB Device Class drivers
> #
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=m
>
> #
> # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
> #
>
> #
> # may also be needed; see USB_STORAGE Help for more information
> #
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_USBAT=y
> CONFIG_USB_STORAGE_SDDR09=y
> CONFIG_USB_STORAGE_SDDR55=y
> CONFIG_USB_STORAGE_JUMPSHOT=y
> CONFIG_USB_STORAGE_ALAUDA=y
> # CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_USB_HIDINPUT=y
> # CONFIG_USB_HIDINPUT_POWERBOOK is not set
> CONFIG_HID_FF=y
> CONFIG_HID_PID=y
> CONFIG_LOGITECH_FF=y
> CONFIG_THRUSTMASTER_FF=y
> CONFIG_USB_HIDDEV=y
> CONFIG_USB_AIPTEK=m
> CONFIG_USB_WACOM=m
> CONFIG_USB_ACECAD=m
> CONFIG_USB_KBTAB=m
> CONFIG_USB_POWERMATE=m
> CONFIG_USB_TOUCHSCREEN=m
> CONFIG_USB_TOUCHSCREEN_EGALAX=y
> CONFIG_USB_TOUCHSCREEN_PANJIT=y
> CONFIG_USB_TOUCHSCREEN_3M=y
> CONFIG_USB_TOUCHSCREEN_ITM=y
> # CONFIG_USB_YEALINK is not set
> CONFIG_USB_XPAD=m
> CONFIG_USB_ATI_REMOTE=m
> CONFIG_USB_ATI_REMOTE2=m
> CONFIG_USB_KEYSPAN_REMOTE=m
> CONFIG_USB_APPLETOUCH=m
>
> #
> # USB Imaging devices
> #
> CONFIG_USB_MDC800=m
> CONFIG_USB_MICROTEK=m
>
> #
> # USB Network Adapters
> #
> CONFIG_USB_CATC=m
> CONFIG_USB_KAWETH=m
> CONFIG_USB_PEGASUS=m
> CONFIG_USB_RTL8150=m
> CONFIG_USB_USBNET=m
> CONFIG_USB_NET_AX8817X=m
> CONFIG_USB_NET_CDCETHER=m
> CONFIG_USB_NET_DM9601=m
> CONFIG_USB_NET_GL620A=m
> CONFIG_USB_NET_NET1080=m
> CONFIG_USB_NET_PLUSB=m
> CONFIG_USB_NET_RNDIS_HOST=m
> CONFIG_USB_NET_CDC_SUBSET=m
> CONFIG_USB_ALI_M5632=y
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_ARMLINUX=y
> CONFIG_USB_EPSON2888=y
> CONFIG_USB_NET_ZAURUS=m
> CONFIG_USB_MON=y
>
> #
> # USB port drivers
> #
> CONFIG_USB_USS720=m
>
> #
> # USB Serial Converter support
> #
> CONFIG_USB_SERIAL=m
> CONFIG_USB_SERIAL_GENERIC=y
> CONFIG_USB_SERIAL_AIRPRIME=m
> CONFIG_USB_SERIAL_ARK3116=m
> CONFIG_USB_SERIAL_BELKIN=m
> CONFIG_USB_SERIAL_WHITEHEAT=m
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> CONFIG_USB_SERIAL_CP2101=m
> CONFIG_USB_SERIAL_CYPRESS_M8=m
> CONFIG_USB_SERIAL_EMPEG=m
> CONFIG_USB_SERIAL_FTDI_SIO=m
> CONFIG_USB_SERIAL_FUNSOFT=m
> CONFIG_USB_SERIAL_VISOR=m
> CONFIG_USB_SERIAL_IPAQ=m
> CONFIG_USB_SERIAL_IR=m
> CONFIG_USB_SERIAL_EDGEPORT=m
> CONFIG_USB_SERIAL_EDGEPORT_TI=m
> CONFIG_USB_SERIAL_GARMIN=m
> CONFIG_USB_SERIAL_IPW=m
> CONFIG_USB_SERIAL_KEYSPAN_PDA=m
> CONFIG_USB_SERIAL_KEYSPAN=m
> CONFIG_USB_SERIAL_KEYSPAN_MPR=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19=y
> CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
> CONFIG_USB_SERIAL_KLSI=m
> CONFIG_USB_SERIAL_KOBIL_SCT=m
> CONFIG_USB_SERIAL_MCT_U232=m
> CONFIG_USB_SERIAL_NAVMAN=m
> CONFIG_USB_SERIAL_PL2303=m
> CONFIG_USB_SERIAL_HP4X=m
> CONFIG_USB_SERIAL_SAFE=m
> CONFIG_USB_SERIAL_SAFE_PADDED=y
> CONFIG_USB_SERIAL_SIERRAWIRELESS=m
> CONFIG_USB_SERIAL_TI=m
> CONFIG_USB_SERIAL_CYBERJACK=m
> CONFIG_USB_SERIAL_XIRCOM=m
> CONFIG_USB_SERIAL_OPTION=m
> CONFIG_USB_SERIAL_OMNINET=m
> CONFIG_USB_EZUSB=y
>
> #
> # USB Miscellaneous drivers
> #
> CONFIG_USB_EMI62=m
> CONFIG_USB_EMI26=m
> CONFIG_USB_AUERSWALD=m
> CONFIG_USB_RIO500=m
> CONFIG_USB_LEGOTOWER=m
> CONFIG_USB_LCD=m
> CONFIG_USB_LED=m
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> CONFIG_USB_PHIDGETKIT=m
> CONFIG_USB_PHIDGETSERVO=m
> CONFIG_USB_IDMOUSE=m
> CONFIG_USB_APPLEDISPLAY=m
> CONFIG_USB_SISUSBVGA=m
> CONFIG_USB_SISUSBVGA_CON=y
> CONFIG_USB_LD=m
> CONFIG_USB_TEST=m
>
> #
> # USB DSL modem support
> #
> CONFIG_USB_ATM=m
> CONFIG_USB_SPEEDTOUCH=m
> CONFIG_USB_CXACRU=m
> CONFIG_USB_UEAGLEATM=m
> CONFIG_USB_XUSBATM=m
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # MMC/SD Card support
> #
> CONFIG_MMC=m
> # CONFIG_MMC_DEBUG is not set
> CONFIG_MMC_BLOCK=m
> CONFIG_MMC_SDHCI=m
> CONFIG_MMC_WBSD=m
>
> #
> # LED devices
> #
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
>
> #
> # LED drivers
> #
>
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=m
> CONFIG_LEDS_TRIGGER_IDE_DISK=y
> CONFIG_LEDS_TRIGGER_HEARTBEAT=m
> CONFIG_INFINIBAND=m
> CONFIG_INFINIBAND_USER_MAD=m
> CONFIG_INFINIBAND_USER_ACCESS=m
> CONFIG_INFINIBAND_USER_MEM=y
> CONFIG_INFINIBAND_ADDR_TRANS=y
> CONFIG_INFINIBAND_MTHCA=m
> CONFIG_INFINIBAND_MTHCA_DEBUG=y
> CONFIG_INFINIBAND_IPATH=m
> CONFIG_INFINIBAND_AMSO1100=m
> # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
> CONFIG_INFINIBAND_CXGB3=m
> # CONFIG_INFINIBAND_CXGB3_DEBUG is not set
> CONFIG_INFINIBAND_NES=m
> # CONFIG_INFINIBAND_NES_DEBUG is not set
> CONFIG_MLX4_INFINIBAND=m
> CONFIG_INFINIBAND_IPOIB=m
> CONFIG_INFINIBAND_IPOIB_CM=y
> CONFIG_INFINIBAND_IPOIB_DEBUG=y
> # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
> CONFIG_INFINIBAND_SRP=m
> CONFIG_INFINIBAND_ISER=m
> CONFIG_INFINIBAND_SDP=m
> # CONFIG_INFINIBAND_SDP_DEBUG is not set
> CONFIG_INFINIBAND_QLGC_VNIC=m
> # CONFIG_INFINIBAND_QLGC_VNIC_DEBUG is not set
> CONFIG_INFINIBAND_QLGC_VNIC_STATS=y
> CONFIG_INFINIBAND_MADEYE=m
>
> #
> # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
> #
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=m
> CONFIG_EDAC_E752X=m
> CONFIG_EDAC_I3000=m
> CONFIG_EDAC_I5000=m
> CONFIG_EDAC_K8=m
> CONFIG_EDAC_POLL=y
>
> #
> # Real Time Clock
> #
> CONFIG_RTC_LIB=m
> CONFIG_RTC_CLASS=m
>
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=m
> CONFIG_RTC_INTF_PROC=m
> CONFIG_RTC_INTF_DEV=m
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
>
> #
> # RTC drivers
> #
> CONFIG_RTC_DRV_X1205=m
> CONFIG_RTC_DRV_DS1307=m
> CONFIG_RTC_DRV_DS1553=m
> CONFIG_RTC_DRV_ISL1208=m
> CONFIG_RTC_DRV_DS1672=m
> CONFIG_RTC_DRV_DS1742=m
> CONFIG_RTC_DRV_PCF8563=m
> CONFIG_RTC_DRV_PCF8583=m
> CONFIG_RTC_DRV_RS5C372=m
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_TEST is not set
> CONFIG_RTC_DRV_V3020=m
>
> #
> # DMA Engine support
> #
> CONFIG_DMA_ENGINE=y
>
> #
> # DMA Clients
> #
> CONFIG_NET_DMA=y
>
> #
> # DMA Devices
> #
> CONFIG_INTEL_IOATDMA=m
>
> #
> # Firmware Drivers
> #
> CONFIG_EDD=m
> CONFIG_DELL_RBU=m
> CONFIG_DCDBAS=m
> CONFIG_ISCSI_IBFT_FIND=y
> CONFIG_ISCSI_IBFT=m
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_FS_XIP=y
> CONFIG_EXT3_FS=m
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> CONFIG_JBD=m
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> CONFIG_GFS2_FS=m
> CONFIG_GFS2_FS_LOCKING_NOLOCK=m
> CONFIG_GFS2_FS_LOCKING_DLM=m
> # CONFIG_OCFS2_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_QUOTA=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> CONFIG_DNOTIFY=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=m
> # CONFIG_FUSE_FS is not set
>
> #
> # Caches
> #
> CONFIG_FSCACHE=m
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=y
> CONFIG_UDF_FS=m
> CONFIG_UDF_NLS=y
> CONFIG_CACHEFILES=m
> CONFIG_CACHEFILES_DEBUG=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_VMCORE=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_RAMFS=y
> CONFIG_CONFIGFS_FS=m
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> CONFIG_ECRYPT_FS=m
> CONFIG_HFS_FS=m
> CONFIG_HFSPLUS_FS=m
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> # CONFIG_JFFS_FS is not set
> CONFIG_JFFS2_FS=m
> CONFIG_JFFS2_FS_DEBUG=0
> CONFIG_JFFS2_FS_WRITEBUFFER=y
> CONFIG_JFFS2_SUMMARY=y
> # CONFIG_JFFS2_FS_XATTR is not set
> # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> CONFIG_JFFS2_ZLIB=y
> CONFIG_JFFS2_RTIME=y
> # CONFIG_JFFS2_RUBIN is not set
> CONFIG_CRAMFS=m
> CONFIG_SQUASHFS=m
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> # CONFIG_SQUASHFS_VMALLOC is not set
> CONFIG_VXFS_FS=m
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
>
> #
> # Network File Systems
> #
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_NFS_V4=y
> CONFIG_NFS_FSCACHE=y
> CONFIG_NFS_DIRECTIO=y
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V3_ACL=y
> CONFIG_NFSD_V4=y
> CONFIG_NFSD_TCP=y
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_NFS_ACL_SUPPORT=m
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=m
> CONFIG_SUNRPC_GSS=m
> CONFIG_RPCSEC_GSS_KRB5=m
> CONFIG_RPCSEC_GSS_SPKM3=m
> # CONFIG_SMB_FS is not set
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
> CONFIG_CIFS_WEAK_PW_HASH=y
> CONFIG_CIFS_XATTR=y
> CONFIG_CIFS_POSIX=y
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_EXPERIMENTAL is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
> # CONFIG_9P_FS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> CONFIG_OSF_PARTITION=y
> CONFIG_AMIGA_PARTITION=y
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> CONFIG_KARMA_PARTITION=y
> CONFIG_EFI_PARTITION=y
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=m
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_CODEPAGE_1250=m
> CONFIG_NLS_CODEPAGE_1251=m
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=m
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_13=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
> CONFIG_NLS_KOI8_U=m
> CONFIG_NLS_UTF8=m
>
> #
> # Distributed Lock Manager
> #
> CONFIG_DLM=m
> CONFIG_DLM_DEBUG=y
>
> #
> # Instrumentation Support
> #
> CONFIG_PROFILING=y
> CONFIG_OPROFILE=m
> CONFIG_KPROBES=y
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> # CONFIG_PRINTK_TIME is not set
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_KERNEL=y
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_DETECT_SOFTLOCKUP=y
> CONFIG_SCHEDSTATS=y
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_RWSEMS is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_INFO=y
> CONFIG_DEBUG_FS=y
> # CONFIG_DEBUG_VM is not set
> CONFIG_DEBUG_LIST=y
> # CONFIG_FRAME_POINTER is not set
> # CONFIG_FORCED_INLINING is not set
> CONFIG_BOOT_DELAY=y
> # CONFIG_RCU_TORTURE_TEST is not set
> CONFIG_DEBUG_RODATA=y
> # CONFIG_IOMMU_DEBUG is not set
> CONFIG_DEBUG_STACKOVERFLOW=y
> # CONFIG_DEBUG_STACK_USAGE is not set
>
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_KEYS_DEBUG_PROC_KEYS=y
> CONFIG_SECURITY=y
> CONFIG_SECURITY_NETWORK=y
> CONFIG_SECURITY_NETWORK_XFRM=y
> CONFIG_SECURITY_CAPABILITIES=y
> # CONFIG_SECURITY_ROOTPLUG is not set
> # CONFIG_SECURITY_SECLVL is not set
> CONFIG_SECURITY_SELINUX=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
> CONFIG_SECURITY_SELINUX_DISABLE=y
> CONFIG_SECURITY_SELINUX_DEVELOP=y
> CONFIG_SECURITY_SELINUX_AVC_STATS=y
> CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
> CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
> # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
>
> #
> # Cryptographic options
> #
> CONFIG_CRYPTO=y
> CONFIG_CRYPTO_API=m
> CONFIG_CRYPTO_ALGAPI=m
> CONFIG_CRYPTO_AEAD=m
> CONFIG_CRYPTO_BLKCIPHER=m
> CONFIG_CRYPTO_SEQIV=m
> CONFIG_CRYPTO_HASH=m
> CONFIG_CRYPTO_MANAGER=m
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_NHMAC=m
> CONFIG_CRYPTO_XCBC=m
> CONFIG_CRYPTO_NULL=m
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=m
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=m
> CONFIG_CRYPTO_WP512=m
> CONFIG_CRYPTO_TGR192=m
> CONFIG_CRYPTO_ECB=m
> CONFIG_CRYPTO_CBC=m
> CONFIG_CRYPTO_CTR=m
> CONFIG_CRYPTO_CCM=m
> CONFIG_CRYPTO_DES=m
> CONFIG_CRYPTO_BLOWFISH=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_SERPENT=m
> CONFIG_CRYPTO_AES=m
> CONFIG_CRYPTO_AES_X86_64=m
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_TEA=m
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_KHAZAD=m
> CONFIG_CRYPTO_ANUBIS=m
> CONFIG_CRYPTO_DEFLATE=m
> CONFIG_CRYPTO_MICHAEL_MIC=m
> CONFIG_CRYPTO_CRC32C=y
> # CONFIG_CRYPTO_TEST is not set
> CONFIG_CRYPTO_AUTHENC=m
> CONFIG_CRYPTO_SIGNATURE=y
> CONFIG_CRYPTO_SIGNATURE_DSA=y
> CONFIG_CRYPTO_MPILIB=y
>
> #
> # Hardware crypto devices
> #
>
> #
> # Library routines
> #
> CONFIG_CRC_CCITT=m
> CONFIG_CRC16=m
> CONFIG_CRC32=y
> CONFIG_LIBCRC32C=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_GENERIC_ALLOCATOR=y
> CONFIG_REED_SOLOMON=m
> CONFIG_REED_SOLOMON_DEC16=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_PLIST=y
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> #
> # Automatically generated make config: don't edit
> # Linux kernel version: 2.6.30
> # Wed Jun 17 23:53:15 2009
> #
> CONFIG_64BIT=y
> # CONFIG_X86_32 is not set
> CONFIG_X86_64=y
> CONFIG_X86=y
> CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
> CONFIG_GENERIC_TIME=y
> CONFIG_GENERIC_CMOS_UPDATE=y
> CONFIG_CLOCKSOURCE_WATCHDOG=y
> CONFIG_GENERIC_CLOCKEVENTS=y
> CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
> CONFIG_LOCKDEP_SUPPORT=y
> CONFIG_STACKTRACE_SUPPORT=y
> CONFIG_HAVE_LATENCYTOP_SUPPORT=y
> CONFIG_FAST_CMPXCHG_LOCAL=y
> CONFIG_MMU=y
> CONFIG_ZONE_DMA=y
> CONFIG_GENERIC_ISA_DMA=y
> CONFIG_GENERIC_IOMAP=y
> CONFIG_GENERIC_BUG=y
> CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
> CONFIG_GENERIC_HWEIGHT=y
> CONFIG_ARCH_MAY_HAVE_PC_FDC=y
> CONFIG_RWSEM_GENERIC_SPINLOCK=y
> # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
> CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
> CONFIG_GENERIC_CALIBRATE_DELAY=y
> CONFIG_GENERIC_TIME_VSYSCALL=y
> CONFIG_ARCH_HAS_CPU_RELAX=y
> CONFIG_ARCH_HAS_DEFAULT_IDLE=y
> CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
> CONFIG_HAVE_SETUP_PER_CPU_AREA=y
> CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
> CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
> CONFIG_ARCH_HIBERNATION_POSSIBLE=y
> CONFIG_ARCH_SUSPEND_POSSIBLE=y
> CONFIG_ZONE_DMA32=y
> CONFIG_ARCH_POPULATES_NODE_MAP=y
> CONFIG_AUDIT_ARCH=y
> CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
> CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
> CONFIG_GENERIC_HARDIRQS=y
> CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
> CONFIG_GENERIC_IRQ_PROBE=y
> CONFIG_GENERIC_PENDING_IRQ=y
> CONFIG_USE_GENERIC_SMP_HELPERS=y
> CONFIG_X86_64_SMP=y
> CONFIG_X86_HT=y
> CONFIG_X86_TRAMPOLINE=y
> # CONFIG_KTIME_SCALAR is not set
> CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
>
> #
> # General setup
> #
> CONFIG_EXPERIMENTAL=y
> CONFIG_LOCK_KERNEL=y
> CONFIG_INIT_ENV_ARG_LIMIT=32
> CONFIG_LOCALVERSION=""
> # CONFIG_LOCALVERSION_AUTO is not set
> CONFIG_HAVE_KERNEL_GZIP=y
> CONFIG_HAVE_KERNEL_BZIP2=y
> CONFIG_HAVE_KERNEL_LZMA=y
> CONFIG_KERNEL_GZIP=y
> # CONFIG_KERNEL_BZIP2 is not set
> # CONFIG_KERNEL_LZMA is not set
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_SYSVIPC_SYSCTL=y
> CONFIG_POSIX_MQUEUE=y
> CONFIG_POSIX_MQUEUE_SYSCTL=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_TASKSTATS=y
> CONFIG_TASK_DELAY_ACCT=y
> # CONFIG_TASK_XACCT is not set
> CONFIG_AUDIT=y
> CONFIG_AUDITSYSCALL=y
> CONFIG_AUDIT_TREE=y
>
> #
> # RCU Subsystem
> #
> CONFIG_CLASSIC_RCU=y
> # CONFIG_TREE_RCU is not set
> # CONFIG_PREEMPT_RCU is not set
> # CONFIG_TREE_RCU_TRACE is not set
> # CONFIG_PREEMPT_RCU_TRACE is not set
> # CONFIG_IKCONFIG is not set
> CONFIG_LOG_BUF_SHIFT=17
> CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
> # CONFIG_GROUP_SCHED is not set
> # CONFIG_CGROUPS is not set
> CONFIG_SYSFS_DEPRECATED=y
> CONFIG_SYSFS_DEPRECATED_V2=y
> CONFIG_RELAY=y
> CONFIG_NAMESPACES=y
> # CONFIG_UTS_NS is not set
> # CONFIG_IPC_NS is not set
> # CONFIG_USER_NS is not set
> # CONFIG_PID_NS is not set
> # CONFIG_NET_NS is not set
> CONFIG_BLK_DEV_INITRD=y
> CONFIG_INITRAMFS_SOURCE=""
> CONFIG_RD_GZIP=y
> CONFIG_RD_BZIP2=y
> CONFIG_RD_LZMA=y
> CONFIG_CC_OPTIMIZE_FOR_SIZE=y
> CONFIG_SYSCTL=y
> CONFIG_ANON_INODES=y
> # CONFIG_EMBEDDED is not set
> CONFIG_UID16=y
> CONFIG_SYSCTL_SYSCALL=y
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> CONFIG_KALLSYMS_EXTRA_PASS=y
> # CONFIG_STRIP_ASM_SYMS is not set
> CONFIG_HOTPLUG=y
> CONFIG_PRINTK=y
> CONFIG_BUG=y
> CONFIG_ELF_CORE=y
> CONFIG_PCSPKR_PLATFORM=y
> CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_SIGNALFD=y
> CONFIG_TIMERFD=y
> CONFIG_EVENTFD=y
> CONFIG_SHMEM=y
> CONFIG_AIO=y
> CONFIG_VM_EVENT_COUNTERS=y
> CONFIG_PCI_QUIRKS=y
> CONFIG_COMPAT_BRK=y
> CONFIG_SLAB=y
> # CONFIG_SLUB is not set
> # CONFIG_SLOB is not set
> CONFIG_PROFILING=y
> CONFIG_TRACEPOINTS=y
> # CONFIG_MARKERS is not set
> CONFIG_OPROFILE=m
> # CONFIG_OPROFILE_IBS is not set
> CONFIG_HAVE_OPROFILE=y
> CONFIG_KPROBES=y
> CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
> CONFIG_KRETPROBES=y
> CONFIG_HAVE_IOREMAP_PROT=y
> CONFIG_HAVE_KPROBES=y
> CONFIG_HAVE_KRETPROBES=y
> CONFIG_HAVE_ARCH_TRACEHOOK=y
> CONFIG_HAVE_DMA_API_DEBUG=y
> CONFIG_SLOW_WORK=y
> # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
> CONFIG_SLABINFO=y
> CONFIG_RT_MUTEXES=y
> CONFIG_BASE_SMALL=0
> CONFIG_MODULES=y
> # CONFIG_MODULE_FORCE_LOAD is not set
> CONFIG_MODULE_UNLOAD=y
> # CONFIG_MODULE_FORCE_UNLOAD is not set
> CONFIG_MODVERSIONS=y
> CONFIG_MODULE_SRCVERSION_ALL=y
> CONFIG_STOP_MACHINE=y
> CONFIG_BLOCK=y
> # CONFIG_BLK_DEV_BSG is not set
> # CONFIG_BLK_DEV_INTEGRITY is not set
> CONFIG_BLOCK_COMPAT=y
>
> #
> # IO Schedulers
> #
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_DEFAULT_AS is not set
> # CONFIG_DEFAULT_DEADLINE is not set
> CONFIG_DEFAULT_CFQ=y
> # CONFIG_DEFAULT_NOOP is not set
> CONFIG_DEFAULT_IOSCHED="cfq"
> CONFIG_FREEZER=y
>
> #
> # Processor type and features
> #
> # CONFIG_NO_HZ is not set
> # CONFIG_HIGH_RES_TIMERS is not set
> CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
> CONFIG_SMP=y
> # CONFIG_SPARSE_IRQ is not set
> CONFIG_X86_MPPARSE=y
> CONFIG_X86_EXTENDED_PLATFORM=y
> # CONFIG_X86_VSMP is not set
> # CONFIG_X86_UV is not set
> CONFIG_SCHED_OMIT_FRAME_POINTER=y
> # CONFIG_PARAVIRT_GUEST is not set
> # CONFIG_MEMTEST is not set
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMII is not set
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUMM is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MEFFICEON is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MGEODEGX1 is not set
> # CONFIG_MGEODE_LX is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> # CONFIG_MVIAC7 is not set
> # CONFIG_MPSC is not set
> # CONFIG_MCORE2 is not set
> CONFIG_GENERIC_CPU=y
> CONFIG_X86_CPU=y
> CONFIG_X86_L1_CACHE_BYTES=64
> CONFIG_X86_INTERNODE_CACHE_BYTES=64
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_L1_CACHE_SHIFT=6
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_TSC=y
> CONFIG_X86_CMPXCHG64=y
> CONFIG_X86_CMOV=y
> CONFIG_X86_MINIMUM_CPU_FAMILY=64
> CONFIG_X86_DEBUGCTLMSR=y
> CONFIG_CPU_SUP_INTEL=y
> CONFIG_CPU_SUP_AMD=y
> CONFIG_CPU_SUP_CENTAUR=y
> # CONFIG_X86_DS is not set
> CONFIG_HPET_TIMER=y
> CONFIG_HPET_EMULATE_RTC=y
> CONFIG_DMI=y
> CONFIG_GART_IOMMU=y
> CONFIG_CALGARY_IOMMU=y
> # CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
> # CONFIG_AMD_IOMMU is not set
> CONFIG_SWIOTLB=y
> CONFIG_IOMMU_HELPER=y
> # CONFIG_IOMMU_API is not set
> # CONFIG_MAXSMP is not set
> CONFIG_NR_CPUS=255
> CONFIG_SCHED_SMT=y
> CONFIG_SCHED_MC=y
> # CONFIG_PREEMPT_NONE is not set
> CONFIG_PREEMPT_VOLUNTARY=y
> # CONFIG_PREEMPT is not set
> CONFIG_X86_LOCAL_APIC=y
> CONFIG_X86_IO_APIC=y
> # CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
> CONFIG_X86_MCE=y
> CONFIG_X86_MCE_INTEL=y
> CONFIG_X86_MCE_AMD=y
> CONFIG_X86_MCE_THRESHOLD=y
> # CONFIG_I8K is not set
> CONFIG_MICROCODE=m
> CONFIG_MICROCODE_INTEL=y
> # CONFIG_MICROCODE_AMD is not set
> CONFIG_MICROCODE_OLD_INTERFACE=y
> CONFIG_X86_MSR=y
> CONFIG_X86_CPUID=y
> # CONFIG_X86_CPU_DEBUG is not set
> CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
> CONFIG_DIRECT_GBPAGES=y
> CONFIG_NUMA=y
> CONFIG_K8_NUMA=y
> CONFIG_X86_64_ACPI_NUMA=y
> CONFIG_NODES_SPAN_OTHER_NODES=y
> # CONFIG_NUMA_EMU is not set
> CONFIG_NODES_SHIFT=6
> CONFIG_ARCH_SPARSEMEM_DEFAULT=y
> CONFIG_ARCH_SPARSEMEM_ENABLE=y
> CONFIG_ARCH_SELECT_MEMORY_MODEL=y
> CONFIG_ARCH_MEMORY_PROBE=y
> CONFIG_SELECT_MEMORY_MODEL=y
> # CONFIG_FLATMEM_MANUAL is not set
> # CONFIG_DISCONTIGMEM_MANUAL is not set
> CONFIG_SPARSEMEM_MANUAL=y
> CONFIG_SPARSEMEM=y
> CONFIG_NEED_MULTIPLE_NODES=y
> CONFIG_HAVE_MEMORY_PRESENT=y
> CONFIG_SPARSEMEM_EXTREME=y
> CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
> CONFIG_SPARSEMEM_VMEMMAP=y
> CONFIG_MEMORY_HOTPLUG=y
> CONFIG_MEMORY_HOTPLUG_SPARSE=y
> # CONFIG_MEMORY_HOTREMOVE is not set
> CONFIG_PAGEFLAGS_EXTENDED=y
> CONFIG_SPLIT_PTLOCK_CPUS=4
> CONFIG_MIGRATION=y
> CONFIG_PHYS_ADDR_T_64BIT=y
> CONFIG_ZONE_DMA_FLAG=1
> CONFIG_BOUNCE=y
> CONFIG_VIRT_TO_BUS=y
> CONFIG_UNEVICTABLE_LRU=y
> CONFIG_HAVE_MLOCK=y
> CONFIG_HAVE_MLOCKED_PAGE_BIT=y
> # CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
> CONFIG_X86_RESERVE_LOW_64K=y
> CONFIG_MTRR=y
> CONFIG_MTRR_SANITIZER=y
> CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
> CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
> # CONFIG_X86_PAT is not set
> # CONFIG_EFI is not set
> # CONFIG_SECCOMP is not set
> # CONFIG_CC_STACKPROTECTOR is not set
> # CONFIG_HZ_100 is not set
> # CONFIG_HZ_250 is not set
> # CONFIG_HZ_300 is not set
> CONFIG_HZ_1000=y
> CONFIG_HZ=1000
> # CONFIG_SCHED_HRTICK is not set
> CONFIG_KEXEC=y
> CONFIG_CRASH_DUMP=y
> CONFIG_PHYSICAL_START=0x200000
> # CONFIG_RELOCATABLE is not set
> CONFIG_PHYSICAL_ALIGN=0x200000
> CONFIG_HOTPLUG_CPU=y
> CONFIG_COMPAT_VDSO=y
> # CONFIG_CMDLINE_BOOL is not set
> CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
> CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
> CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
>
> #
> # Power management and ACPI options
> #
> CONFIG_PM=y
> # CONFIG_PM_DEBUG is not set
> CONFIG_PM_SLEEP_SMP=y
> CONFIG_PM_SLEEP=y
> CONFIG_SUSPEND=y
> CONFIG_SUSPEND_FREEZER=y
> # CONFIG_HIBERNATION is not set
> CONFIG_ACPI=y
> CONFIG_ACPI_SLEEP=y
> # CONFIG_ACPI_PROCFS is not set
> CONFIG_ACPI_PROCFS_POWER=y
> CONFIG_ACPI_SYSFS_POWER=y
> CONFIG_ACPI_PROC_EVENT=y
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_BATTERY=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_VIDEO=m
> CONFIG_ACPI_FAN=y
> CONFIG_ACPI_DOCK=y
> CONFIG_ACPI_PROCESSOR=y
> CONFIG_ACPI_HOTPLUG_CPU=y
> CONFIG_ACPI_THERMAL=y
> CONFIG_ACPI_NUMA=y
> # CONFIG_ACPI_CUSTOM_DSDT is not set
> CONFIG_ACPI_BLACKLIST_YEAR=0
> # CONFIG_ACPI_DEBUG is not set
> # CONFIG_ACPI_PCI_SLOT is not set
> CONFIG_X86_PM_TIMER=y
> CONFIG_ACPI_CONTAINER=y
> CONFIG_ACPI_HOTPLUG_MEMORY=m
> CONFIG_ACPI_SBS=m
>
> #
> # CPU Frequency scaling
> #
> CONFIG_CPU_FREQ=y
> CONFIG_CPU_FREQ_TABLE=y
> CONFIG_CPU_FREQ_DEBUG=y
> CONFIG_CPU_FREQ_STAT=m
> CONFIG_CPU_FREQ_STAT_DETAILS=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
> CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
> # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
> # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
> CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
> CONFIG_CPU_FREQ_GOV_POWERSAVE=m
> CONFIG_CPU_FREQ_GOV_USERSPACE=y
> CONFIG_CPU_FREQ_GOV_ONDEMAND=m
> CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
>
> #
> # CPUFreq processor drivers
> #
> CONFIG_X86_ACPI_CPUFREQ=m
> CONFIG_X86_POWERNOW_K8=y
> CONFIG_X86_SPEEDSTEP_CENTRINO=y
> # CONFIG_X86_P4_CLOCKMOD is not set
>
> #
> # shared options
> #
> # CONFIG_X86_SPEEDSTEP_LIB is not set
> CONFIG_CPU_IDLE=y
> CONFIG_CPU_IDLE_GOV_LADDER=y
>
> #
> # Memory power savings
> #
> # CONFIG_I7300_IDLE is not set
>
> #
> # Bus options (PCI etc.)
> #
> CONFIG_PCI=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_MMCONFIG=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_DMAR is not set
> # CONFIG_INTR_REMAP is not set
> CONFIG_PCIEPORTBUS=y
> CONFIG_HOTPLUG_PCI_PCIE=m
> CONFIG_PCIEAER=y
> # CONFIG_PCIEASPM is not set
> CONFIG_ARCH_SUPPORTS_MSI=y
> CONFIG_PCI_MSI=y
> CONFIG_PCI_LEGACY=y
> # CONFIG_PCI_DEBUG is not set
> # CONFIG_PCI_STUB is not set
> CONFIG_HT_IRQ=y
> # CONFIG_PCI_IOV is not set
> CONFIG_ISA_DMA_API=y
> CONFIG_K8_NB=y
> CONFIG_PCCARD=y
> # CONFIG_PCMCIA_DEBUG is not set
> CONFIG_PCMCIA=y
> CONFIG_PCMCIA_LOAD_CIS=y
> CONFIG_PCMCIA_IOCTL=y
> CONFIG_CARDBUS=y
>
> #
> # PC-card bridges
> #
> CONFIG_YENTA=y
> CONFIG_YENTA_O2=y
> CONFIG_YENTA_RICOH=y
> CONFIG_YENTA_TI=y
> CONFIG_YENTA_ENE_TUNE=y
> CONFIG_YENTA_TOSHIBA=y
> CONFIG_PD6729=m
> # CONFIG_I82092 is not set
> CONFIG_PCCARD_NONSTATIC=y
> CONFIG_HOTPLUG_PCI=y
> CONFIG_HOTPLUG_PCI_FAKE=m
> CONFIG_HOTPLUG_PCI_ACPI=m
> CONFIG_HOTPLUG_PCI_ACPI_IBM=m
> # CONFIG_HOTPLUG_PCI_CPCI is not set
> CONFIG_HOTPLUG_PCI_SHPC=m
>
> #
> # Executable file formats / Emulations
> #
> CONFIG_BINFMT_ELF=y
> CONFIG_COMPAT_BINFMT_ELF=y
> # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
> # CONFIG_HAVE_AOUT is not set
> CONFIG_BINFMT_MISC=y
> CONFIG_IA32_EMULATION=y
> # CONFIG_IA32_AOUT is not set
> CONFIG_COMPAT=y
> CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
> CONFIG_SYSVIPC_COMPAT=y
> CONFIG_NET=y
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> CONFIG_PACKET_MMAP=y
> CONFIG_UNIX=y
> CONFIG_XFRM=y
> CONFIG_XFRM_USER=y
> # CONFIG_XFRM_SUB_POLICY is not set
> # CONFIG_XFRM_MIGRATE is not set
> # CONFIG_XFRM_STATISTICS is not set
> CONFIG_XFRM_IPCOMP=m
> CONFIG_NET_KEY=m
> # CONFIG_NET_KEY_MIGRATE is not set
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_ADVANCED_ROUTER=y
> CONFIG_ASK_IP_FIB_HASH=y
> # CONFIG_IP_FIB_TRIE is not set
> CONFIG_IP_FIB_HASH=y
> CONFIG_IP_MULTIPLE_TABLES=y
> CONFIG_IP_ROUTE_MULTIPATH=y
> CONFIG_IP_ROUTE_VERBOSE=y
> # CONFIG_IP_PNP is not set
> CONFIG_NET_IPIP=m
> CONFIG_NET_IPGRE=m
> CONFIG_NET_IPGRE_BROADCAST=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> # CONFIG_ARPD is not set
> CONFIG_SYN_COOKIES=y
> CONFIG_INET_AH=m
> CONFIG_INET_ESP=m
> CONFIG_INET_IPCOMP=m
> CONFIG_INET_XFRM_TUNNEL=m
> CONFIG_INET_TUNNEL=m
> CONFIG_INET_XFRM_MODE_TRANSPORT=m
> CONFIG_INET_XFRM_MODE_TUNNEL=m
> CONFIG_INET_XFRM_MODE_BEET=y
> CONFIG_INET_LRO=y
> CONFIG_INET_DIAG=m
> CONFIG_INET_TCP_DIAG=m
> CONFIG_TCP_CONG_ADVANCED=y
> CONFIG_TCP_CONG_BIC=y
> CONFIG_TCP_CONG_CUBIC=m
> CONFIG_TCP_CONG_WESTWOOD=m
> CONFIG_TCP_CONG_HTCP=m
> CONFIG_TCP_CONG_HSTCP=m
> CONFIG_TCP_CONG_HYBLA=m
> CONFIG_TCP_CONG_VEGAS=m
> CONFIG_TCP_CONG_SCALABLE=m
> CONFIG_TCP_CONG_LP=m
> CONFIG_TCP_CONG_VENO=m
> # CONFIG_TCP_CONG_YEAH is not set
> # CONFIG_TCP_CONG_ILLINOIS is not set
> CONFIG_DEFAULT_BIC=y
> # CONFIG_DEFAULT_CUBIC is not set
> # CONFIG_DEFAULT_HTCP is not set
> # CONFIG_DEFAULT_VEGAS is not set
> # CONFIG_DEFAULT_WESTWOOD is not set
> # CONFIG_DEFAULT_RENO is not set
> CONFIG_DEFAULT_TCP_CONG="bic"
> # CONFIG_TCP_MD5SIG is not set
> CONFIG_IPV6=m
> CONFIG_IPV6_PRIVACY=y
> CONFIG_IPV6_ROUTER_PREF=y
> CONFIG_IPV6_ROUTE_INFO=y
> CONFIG_IPV6_OPTIMISTIC_DAD=y
> CONFIG_INET6_AH=m
> CONFIG_INET6_ESP=m
> CONFIG_INET6_IPCOMP=m
> # CONFIG_IPV6_MIP6 is not set
> CONFIG_INET6_XFRM_TUNNEL=m
> CONFIG_INET6_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_TRANSPORT=m
> CONFIG_INET6_XFRM_MODE_TUNNEL=m
> CONFIG_INET6_XFRM_MODE_BEET=m
> # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
> CONFIG_IPV6_SIT=m
> CONFIG_IPV6_NDISC_NODETYPE=y
> CONFIG_IPV6_TUNNEL=m
> CONFIG_IPV6_MULTIPLE_TABLES=y
> # CONFIG_IPV6_SUBTREES is not set
> # CONFIG_IPV6_MROUTE is not set
> CONFIG_NETLABEL=y
> CONFIG_NETWORK_SECMARK=y
> CONFIG_NETFILTER=y
> # CONFIG_NETFILTER_DEBUG is not set
> CONFIG_NETFILTER_ADVANCED=y
> CONFIG_BRIDGE_NETFILTER=y
>
> #
> # Core Netfilter Configuration
> #
> CONFIG_NETFILTER_NETLINK=m
> CONFIG_NETFILTER_NETLINK_QUEUE=m
> CONFIG_NETFILTER_NETLINK_LOG=m
> # CONFIG_NF_CONNTRACK is not set
> # CONFIG_NETFILTER_TPROXY is not set
> CONFIG_NETFILTER_XTABLES=m
> CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
> # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
> CONFIG_NETFILTER_XT_TARGET_HL=m
> # CONFIG_NETFILTER_XT_TARGET_LED is not set
> CONFIG_NETFILTER_XT_TARGET_MARK=m
> # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
> CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
> # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
> # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
> CONFIG_NETFILTER_XT_TARGET_SECMARK=m
> # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
> # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
> CONFIG_NETFILTER_XT_MATCH_COMMENT=m
> CONFIG_NETFILTER_XT_MATCH_DCCP=m
> # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
> CONFIG_NETFILTER_XT_MATCH_ESP=m
> # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
> CONFIG_NETFILTER_XT_MATCH_HL=m
> # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
> CONFIG_NETFILTER_XT_MATCH_LENGTH=m
> CONFIG_NETFILTER_XT_MATCH_LIMIT=m
> CONFIG_NETFILTER_XT_MATCH_MAC=m
> CONFIG_NETFILTER_XT_MATCH_MARK=m
> CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
> # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
> CONFIG_NETFILTER_XT_MATCH_POLICY=m
> CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
> CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
> CONFIG_NETFILTER_XT_MATCH_QUOTA=m
> # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
> CONFIG_NETFILTER_XT_MATCH_REALM=m
> # CONFIG_NETFILTER_XT_MATCH_RECENT is not set
> CONFIG_NETFILTER_XT_MATCH_SCTP=m
> CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
> CONFIG_NETFILTER_XT_MATCH_STRING=m
> CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
> # CONFIG_NETFILTER_XT_MATCH_TIME is not set
> # CONFIG_NETFILTER_XT_MATCH_U32 is not set
> CONFIG_IP_VS=m
> # CONFIG_IP_VS_IPV6 is not set
> # CONFIG_IP_VS_DEBUG is not set
> CONFIG_IP_VS_TAB_BITS=12
>
> #
> # IPVS transport protocol load balancing support
> #
> CONFIG_IP_VS_PROTO_TCP=y
> CONFIG_IP_VS_PROTO_UDP=y
> CONFIG_IP_VS_PROTO_AH_ESP=y
> CONFIG_IP_VS_PROTO_ESP=y
> CONFIG_IP_VS_PROTO_AH=y
>
> #
> # IPVS scheduler
> #
> CONFIG_IP_VS_RR=m
> CONFIG_IP_VS_WRR=m
> CONFIG_IP_VS_LC=m
> CONFIG_IP_VS_WLC=m
> CONFIG_IP_VS_LBLC=m
> CONFIG_IP_VS_LBLCR=m
> CONFIG_IP_VS_DH=m
> CONFIG_IP_VS_SH=m
> CONFIG_IP_VS_SED=m
> CONFIG_IP_VS_NQ=m
>
> #
> # IPVS application helper
> #
> CONFIG_IP_VS_FTP=m
>
> #
> # IP: Netfilter Configuration
> #
> # CONFIG_NF_DEFRAG_IPV4 is not set
> CONFIG_IP_NF_QUEUE=m
> CONFIG_IP_NF_IPTABLES=m
> CONFIG_IP_NF_MATCH_ADDRTYPE=m
> CONFIG_IP_NF_MATCH_AH=m
> CONFIG_IP_NF_MATCH_ECN=m
> CONFIG_IP_NF_MATCH_TTL=m
> CONFIG_IP_NF_FILTER=m
> CONFIG_IP_NF_TARGET_REJECT=m
> CONFIG_IP_NF_TARGET_LOG=m
> CONFIG_IP_NF_TARGET_ULOG=m
> CONFIG_IP_NF_MANGLE=m
> CONFIG_IP_NF_TARGET_ECN=m
> CONFIG_IP_NF_TARGET_TTL=m
> CONFIG_IP_NF_RAW=m
> # CONFIG_IP_NF_SECURITY is not set
> CONFIG_IP_NF_ARPTABLES=m
> CONFIG_IP_NF_ARPFILTER=m
> CONFIG_IP_NF_ARP_MANGLE=m
>
> #
> # IPv6: Netfilter Configuration
> #
> CONFIG_IP6_NF_QUEUE=m
> CONFIG_IP6_NF_IPTABLES=m
> CONFIG_IP6_NF_MATCH_AH=m
> CONFIG_IP6_NF_MATCH_EUI64=m
> CONFIG_IP6_NF_MATCH_FRAG=m
> CONFIG_IP6_NF_MATCH_OPTS=m
> CONFIG_IP6_NF_MATCH_HL=m
> CONFIG_IP6_NF_MATCH_IPV6HEADER=m
> # CONFIG_IP6_NF_MATCH_MH is not set
> CONFIG_IP6_NF_MATCH_RT=m
> CONFIG_IP6_NF_TARGET_HL=m
> CONFIG_IP6_NF_TARGET_LOG=m
> CONFIG_IP6_NF_FILTER=m
> CONFIG_IP6_NF_TARGET_REJECT=m
> CONFIG_IP6_NF_MANGLE=m
> CONFIG_IP6_NF_RAW=m
> # CONFIG_IP6_NF_SECURITY is not set
> CONFIG_BRIDGE_NF_EBTABLES=m
> CONFIG_BRIDGE_EBT_BROUTE=m
> CONFIG_BRIDGE_EBT_T_FILTER=m
> CONFIG_BRIDGE_EBT_T_NAT=m
> CONFIG_BRIDGE_EBT_802_3=m
> CONFIG_BRIDGE_EBT_AMONG=m
> CONFIG_BRIDGE_EBT_ARP=m
> CONFIG_BRIDGE_EBT_IP=m
> # CONFIG_BRIDGE_EBT_IP6 is not set
> CONFIG_BRIDGE_EBT_LIMIT=m
> CONFIG_BRIDGE_EBT_MARK=m
> CONFIG_BRIDGE_EBT_PKTTYPE=m
> CONFIG_BRIDGE_EBT_STP=m
> CONFIG_BRIDGE_EBT_VLAN=m
> CONFIG_BRIDGE_EBT_ARPREPLY=m
> CONFIG_BRIDGE_EBT_DNAT=m
> CONFIG_BRIDGE_EBT_MARK_T=m
> CONFIG_BRIDGE_EBT_REDIRECT=m
> CONFIG_BRIDGE_EBT_SNAT=m
> CONFIG_BRIDGE_EBT_LOG=m
> CONFIG_BRIDGE_EBT_ULOG=m
> # CONFIG_BRIDGE_EBT_NFLOG is not set
> CONFIG_IP_DCCP=m
> CONFIG_INET_DCCP_DIAG=m
>
> #
> # DCCP CCIDs Configuration (EXPERIMENTAL)
> #
> # CONFIG_IP_DCCP_CCID2_DEBUG is not set
> CONFIG_IP_DCCP_CCID3=y
> # CONFIG_IP_DCCP_CCID3_DEBUG is not set
> CONFIG_IP_DCCP_CCID3_RTO=100
> CONFIG_IP_DCCP_TFRC_LIB=y
>
> #
> # DCCP Kernel Hacking
> #
> # CONFIG_IP_DCCP_DEBUG is not set
> # CONFIG_NET_DCCPPROBE is not set
> CONFIG_IP_SCTP=m
> # CONFIG_SCTP_DBG_MSG is not set
> # CONFIG_SCTP_DBG_OBJCNT is not set
> # CONFIG_SCTP_HMAC_NONE is not set
> # CONFIG_SCTP_HMAC_SHA1 is not set
> CONFIG_SCTP_HMAC_MD5=y
> # CONFIG_RDS is not set
> CONFIG_TIPC=m
> # CONFIG_TIPC_ADVANCED is not set
> # CONFIG_TIPC_DEBUG is not set
> CONFIG_ATM=m
> CONFIG_ATM_CLIP=m
> # CONFIG_ATM_CLIP_NO_ICMP is not set
> CONFIG_ATM_LANE=m
> # CONFIG_ATM_MPOA is not set
> CONFIG_ATM_BR2684=m
> # CONFIG_ATM_BR2684_IPFILTER is not set
> CONFIG_STP=m
> CONFIG_BRIDGE=m
> # CONFIG_NET_DSA is not set
> CONFIG_VLAN_8021Q=m
> # CONFIG_VLAN_8021Q_GVRP is not set
> # CONFIG_DECNET is not set
> CONFIG_LLC=y
> # CONFIG_LLC2 is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_PHONET is not set
> CONFIG_NET_SCHED=y
>
> #
> # Queueing/Scheduling
> #
> CONFIG_NET_SCH_CBQ=m
> CONFIG_NET_SCH_HTB=m
> CONFIG_NET_SCH_HFSC=m
> CONFIG_NET_SCH_ATM=m
> CONFIG_NET_SCH_PRIO=m
> # CONFIG_NET_SCH_MULTIQ is not set
> CONFIG_NET_SCH_RED=m
> CONFIG_NET_SCH_SFQ=m
> CONFIG_NET_SCH_TEQL=m
> CONFIG_NET_SCH_TBF=m
> CONFIG_NET_SCH_GRED=m
> CONFIG_NET_SCH_DSMARK=m
> CONFIG_NET_SCH_NETEM=m
> # CONFIG_NET_SCH_DRR is not set
> CONFIG_NET_SCH_INGRESS=m
>
> #
> # Classification
> #
> CONFIG_NET_CLS=y
> CONFIG_NET_CLS_BASIC=m
> CONFIG_NET_CLS_TCINDEX=m
> CONFIG_NET_CLS_ROUTE4=m
> CONFIG_NET_CLS_ROUTE=y
> CONFIG_NET_CLS_FW=m
> CONFIG_NET_CLS_U32=m
> CONFIG_CLS_U32_PERF=y
> CONFIG_CLS_U32_MARK=y
> CONFIG_NET_CLS_RSVP=m
> CONFIG_NET_CLS_RSVP6=m
> # CONFIG_NET_CLS_FLOW is not set
> CONFIG_NET_EMATCH=y
> CONFIG_NET_EMATCH_STACK=32
> CONFIG_NET_EMATCH_CMP=m
> CONFIG_NET_EMATCH_NBYTE=m
> CONFIG_NET_EMATCH_U32=m
> CONFIG_NET_EMATCH_META=m
> CONFIG_NET_EMATCH_TEXT=m
> CONFIG_NET_CLS_ACT=y
> CONFIG_NET_ACT_POLICE=m
> CONFIG_NET_ACT_GACT=m
> CONFIG_GACT_PROB=y
> CONFIG_NET_ACT_MIRRED=m
> CONFIG_NET_ACT_IPT=m
> # CONFIG_NET_ACT_NAT is not set
> CONFIG_NET_ACT_PEDIT=m
> CONFIG_NET_ACT_SIMP=m
> # CONFIG_NET_ACT_SKBEDIT is not set
> CONFIG_NET_CLS_IND=y
> CONFIG_NET_SCH_FIFO=y
> # CONFIG_DCB is not set
>
> #
> # Network testing
> #
> CONFIG_NET_PKTGEN=m
> # CONFIG_NET_TCPPROBE is not set
> # CONFIG_NET_DROP_MONITOR is not set
> # CONFIG_HAMRADIO is not set
> # CONFIG_CAN is not set
> # CONFIG_IRDA is not set
> CONFIG_BT=m
> CONFIG_BT_L2CAP=m
> CONFIG_BT_SCO=m
> CONFIG_BT_RFCOMM=m
> CONFIG_BT_RFCOMM_TTY=y
> CONFIG_BT_BNEP=m
> CONFIG_BT_BNEP_MC_FILTER=y
> CONFIG_BT_BNEP_PROTO_FILTER=y
> CONFIG_BT_HIDP=m
>
> #
> # Bluetooth device drivers
> #
> # CONFIG_BT_HCIBTUSB is not set
> # CONFIG_BT_HCIBTSDIO is not set
> CONFIG_BT_HCIUART=m
> CONFIG_BT_HCIUART_H4=y
> CONFIG_BT_HCIUART_BCSP=y
> # CONFIG_BT_HCIUART_LL is not set
> CONFIG_BT_HCIBCM203X=m
> CONFIG_BT_HCIBPA10X=m
> CONFIG_BT_HCIBFUSB=m
> CONFIG_BT_HCIDTL1=m
> CONFIG_BT_HCIBT3C=m
> CONFIG_BT_HCIBLUECARD=m
> CONFIG_BT_HCIBTUART=m
> CONFIG_BT_HCIVHCI=m
> # CONFIG_AF_RXRPC is not set
> CONFIG_FIB_RULES=y
> CONFIG_WIRELESS=y
> CONFIG_CFG80211=m
> # CONFIG_CFG80211_REG_DEBUG is not set
> # CONFIG_WIRELESS_OLD_REGULATORY is not set
> CONFIG_WIRELESS_EXT=y
> CONFIG_WIRELESS_EXT_SYSFS=y
> # CONFIG_LIB80211 is not set
> CONFIG_MAC80211=m
>
> #
> # Rate control algorithm selection
> #
> CONFIG_MAC80211_RC_MINSTREL=y
> # CONFIG_MAC80211_RC_DEFAULT_PID is not set
> CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
> CONFIG_MAC80211_RC_DEFAULT="minstrel"
> # CONFIG_MAC80211_MESH is not set
> CONFIG_MAC80211_LEDS=y
> # CONFIG_MAC80211_DEBUGFS is not set
> # CONFIG_MAC80211_DEBUG_MENU is not set
> # CONFIG_WIMAX is not set
> CONFIG_RFKILL=m
> # CONFIG_RFKILL_INPUT is not set
> CONFIG_RFKILL_LEDS=y
> # CONFIG_NET_9P is not set
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
> CONFIG_STANDALONE=y
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> CONFIG_FW_LOADER=y
> CONFIG_FIRMWARE_IN_KERNEL=y
> CONFIG_EXTRA_FIRMWARE=""
> # CONFIG_DEBUG_DRIVER is not set
> # CONFIG_DEBUG_DEVRES is not set
> # CONFIG_SYS_HYPERVISOR is not set
> CONFIG_CONNECTOR=y
> CONFIG_PROC_EVENTS=y
> CONFIG_MTD=m
> # CONFIG_MTD_DEBUG is not set
> CONFIG_MTD_CONCAT=m
> CONFIG_MTD_PARTITIONS=y
> # CONFIG_MTD_TESTS is not set
> CONFIG_MTD_REDBOOT_PARTS=m
> CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
> # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
> # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
> # CONFIG_MTD_AR7_PARTS is not set
>
> #
> # User Modules And Translation Layers
> #
> CONFIG_MTD_CHAR=m
> CONFIG_MTD_BLKDEVS=m
> CONFIG_MTD_BLOCK=m
> CONFIG_MTD_BLOCK_RO=m
> CONFIG_FTL=m
> CONFIG_NFTL=m
> CONFIG_NFTL_RW=y
> # CONFIG_INFTL is not set
> CONFIG_RFD_FTL=m
> # CONFIG_SSFDC is not set
> # CONFIG_MTD_OOPS is not set
>
> #
> # RAM/ROM/Flash chip drivers
> #
> CONFIG_MTD_CFI=m
> CONFIG_MTD_JEDECPROBE=m
> CONFIG_MTD_GEN_PROBE=m
> # CONFIG_MTD_CFI_ADV_OPTIONS is not set
> CONFIG_MTD_MAP_BANK_WIDTH_1=y
> CONFIG_MTD_MAP_BANK_WIDTH_2=y
> CONFIG_MTD_MAP_BANK_WIDTH_4=y
> # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
> # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
> CONFIG_MTD_CFI_I1=y
> CONFIG_MTD_CFI_I2=y
> # CONFIG_MTD_CFI_I4 is not set
> # CONFIG_MTD_CFI_I8 is not set
> CONFIG_MTD_CFI_INTELEXT=m
> CONFIG_MTD_CFI_AMDSTD=m
> CONFIG_MTD_CFI_STAA=m
> CONFIG_MTD_CFI_UTIL=m
> CONFIG_MTD_RAM=m
> CONFIG_MTD_ROM=m
> CONFIG_MTD_ABSENT=m
>
> #
> # Mapping drivers for chip access
> #
> # CONFIG_MTD_COMPLEX_MAPPINGS is not set
> # CONFIG_MTD_PHYSMAP is not set
> CONFIG_MTD_SC520CDP=m
> CONFIG_MTD_NETSC520=m
> CONFIG_MTD_TS5500=m
> # CONFIG_MTD_AMD76XROM is not set
> # CONFIG_MTD_ICHXROM is not set
> # CONFIG_MTD_ESB2ROM is not set
> # CONFIG_MTD_CK804XROM is not set
> CONFIG_MTD_SCB2_FLASH=m
> # CONFIG_MTD_NETtel is not set
> # CONFIG_MTD_DILNETPC is not set
> # CONFIG_MTD_L440GX is not set
> # CONFIG_MTD_INTEL_VR_NOR is not set
> # CONFIG_MTD_PLATRAM is not set
>
> #
> # Self-contained MTD device drivers
> #
> # CONFIG_MTD_PMC551 is not set
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PHRAM is not set
> CONFIG_MTD_MTDRAM=m
> CONFIG_MTDRAM_TOTAL_SIZE=4096
> CONFIG_MTDRAM_ERASE_SIZE=128
> CONFIG_MTD_BLOCK2MTD=m
>
> #
> # Disk-On-Chip Device Drivers
> #
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOC2001PLUS is not set
> CONFIG_MTD_NAND=m
> # CONFIG_MTD_NAND_VERIFY_WRITE is not set
> CONFIG_MTD_NAND_ECC_SMC=y
> # CONFIG_MTD_NAND_MUSEUM_IDS is not set
> CONFIG_MTD_NAND_IDS=m
> CONFIG_MTD_NAND_DISKONCHIP=m
> # CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
> CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
> # CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
> # CONFIG_MTD_NAND_CAFE is not set
> CONFIG_MTD_NAND_NANDSIM=m
> # CONFIG_MTD_NAND_PLATFORM is not set
> # CONFIG_MTD_ALAUDA is not set
> # CONFIG_MTD_ONENAND is not set
>
> #
> # LPDDR flash memory drivers
> #
> # CONFIG_MTD_LPDDR is not set
>
> #
> # UBI - Unsorted block images
> #
> # CONFIG_MTD_UBI is not set
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_SERIAL=m
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> CONFIG_PARPORT_PC_PCMCIA=m
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_AX88796 is not set
> CONFIG_PARPORT_1284=y
> CONFIG_PARPORT_NOT_PC=y
> CONFIG_PNP=y
> CONFIG_PNP_DEBUG_MESSAGES=y
>
> #
> # Protocols
> #
> CONFIG_PNPACPI=y
> CONFIG_BLK_DEV=y
> CONFIG_BLK_DEV_FD=m
> CONFIG_PARIDE=m
>
> #
> # Parallel IDE high-level drivers
> #
> CONFIG_PARIDE_PD=m
> CONFIG_PARIDE_PCD=m
> CONFIG_PARIDE_PF=m
> CONFIG_PARIDE_PT=m
> CONFIG_PARIDE_PG=m
>
> #
> # Parallel IDE protocol modules
> #
> CONFIG_PARIDE_ATEN=m
> CONFIG_PARIDE_BPCK=m
> CONFIG_PARIDE_COMM=m
> CONFIG_PARIDE_DSTR=m
> CONFIG_PARIDE_FIT2=m
> CONFIG_PARIDE_FIT3=m
> CONFIG_PARIDE_EPAT=m
> CONFIG_PARIDE_EPATC8=y
> CONFIG_PARIDE_EPIA=m
> CONFIG_PARIDE_FRIQ=m
> CONFIG_PARIDE_FRPW=m
> CONFIG_PARIDE_KBIC=m
> CONFIG_PARIDE_KTTI=m
> CONFIG_PARIDE_ON20=m
> CONFIG_PARIDE_ON26=m
> CONFIG_BLK_CPQ_DA=m
> CONFIG_BLK_CPQ_CISS_DA=m
> CONFIG_CISS_SCSI_TAPE=y
> CONFIG_BLK_DEV_DAC960=m
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_COW_COMMON is not set
> CONFIG_BLK_DEV_LOOP=m
> CONFIG_BLK_DEV_CRYPTOLOOP=m
> CONFIG_BLK_DEV_NBD=m
> CONFIG_BLK_DEV_SX8=m
> # CONFIG_BLK_DEV_UB is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_COUNT=16
> CONFIG_BLK_DEV_RAM_SIZE=16384
> # CONFIG_BLK_DEV_XIP is not set
> CONFIG_CDROM_PKTCDVD=m
> CONFIG_CDROM_PKTCDVD_BUFFERS=8
> # CONFIG_CDROM_PKTCDVD_WCACHE is not set
> CONFIG_ATA_OVER_ETH=m
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_MISC_DEVICES=y
> # CONFIG_IBM_ASM is not set
> # CONFIG_PHANTOM is not set
> # CONFIG_SGI_IOC4 is not set
> # CONFIG_TIFM_CORE is not set
> # CONFIG_ICS932S401 is not set
> # CONFIG_ENCLOSURE_SERVICES is not set
> # CONFIG_HP_ILO is not set
> # CONFIG_DELL_LAPTOP is not set
> # CONFIG_ISL29003 is not set
> # CONFIG_C2PORT is not set
>
> #
> # EEPROM support
> #
> # CONFIG_EEPROM_AT24 is not set
> # CONFIG_EEPROM_LEGACY is not set
> # CONFIG_EEPROM_93CX6 is not set
> CONFIG_HAVE_IDE=y
> CONFIG_IDE=y
>
> #
> # Please see Documentation/ide/ide.txt for help/info on IDE drives
> #
> CONFIG_IDE_XFER_MODE=y
> CONFIG_IDE_TIMINGS=y
> CONFIG_IDE_ATAPI=y
> # CONFIG_BLK_DEV_IDE_SATA is not set
> CONFIG_IDE_GD=y
> CONFIG_IDE_GD_ATA=y
> # CONFIG_IDE_GD_ATAPI is not set
> CONFIG_BLK_DEV_IDECS=m
> # CONFIG_BLK_DEV_DELKIN is not set
> CONFIG_BLK_DEV_IDECD=m
> CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
> # CONFIG_BLK_DEV_IDETAPE is not set
> # CONFIG_BLK_DEV_IDEACPI is not set
> CONFIG_IDE_TASK_IOCTL=y
> CONFIG_IDE_PROC_FS=y
>
> #
> # IDE chipset support/bugfixes
> #
> CONFIG_IDE_GENERIC=y
> # CONFIG_BLK_DEV_PLATFORM is not set
> # CONFIG_BLK_DEV_CMD640 is not set
> CONFIG_BLK_DEV_IDEPNP=y
> CONFIG_BLK_DEV_IDEDMA_SFF=y
>
> #
> # PCI IDE chipsets support
> #
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_PCIBUS_ORDER=y
> # CONFIG_BLK_DEV_OFFBOARD is not set
> CONFIG_BLK_DEV_GENERIC=y
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEDMA_PCI=y
> CONFIG_BLK_DEV_AEC62XX=y
> CONFIG_BLK_DEV_ALI15X3=y
> CONFIG_BLK_DEV_AMD74XX=y
> CONFIG_BLK_DEV_ATIIXP=y
> CONFIG_BLK_DEV_CMD64X=y
> # CONFIG_BLK_DEV_TRIFLEX is not set
> # CONFIG_BLK_DEV_CS5520 is not set
> # CONFIG_BLK_DEV_CS5530 is not set
> CONFIG_BLK_DEV_HPT366=y
> # CONFIG_BLK_DEV_JMICRON is not set
> # CONFIG_BLK_DEV_SC1200 is not set
> CONFIG_BLK_DEV_PIIX=y
> # CONFIG_BLK_DEV_IT8172 is not set
> # CONFIG_BLK_DEV_IT8213 is not set
> CONFIG_BLK_DEV_IT821X=y
> # CONFIG_BLK_DEV_NS87415 is not set
> CONFIG_BLK_DEV_PDC202XX_OLD=y
> CONFIG_BLK_DEV_PDC202XX_NEW=y
> CONFIG_BLK_DEV_SVWKS=y
> CONFIG_BLK_DEV_SIIMAGE=y
> CONFIG_BLK_DEV_SIS5513=y
> # CONFIG_BLK_DEV_SLC90E66 is not set
> # CONFIG_BLK_DEV_TRM290 is not set
> CONFIG_BLK_DEV_VIA82CXXX=y
> # CONFIG_BLK_DEV_TC86C001 is not set
> CONFIG_BLK_DEV_IDEDMA=y
>
> #
> # SCSI device support
> #
> CONFIG_RAID_ATTRS=m
> CONFIG_SCSI=m
> CONFIG_SCSI_DMA=y
> # CONFIG_SCSI_TGT is not set
> CONFIG_SCSI_NETLINK=y
> CONFIG_SCSI_PROC_FS=y
>
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=m
> CONFIG_CHR_DEV_ST=m
> CONFIG_CHR_DEV_OSST=m
> CONFIG_BLK_DEV_SR=m
> CONFIG_BLK_DEV_SR_VENDOR=y
> CONFIG_CHR_DEV_SG=m
> CONFIG_CHR_DEV_SCH=m
>
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_MULTI_LUN=y
> CONFIG_SCSI_CONSTANTS=y
> CONFIG_SCSI_LOGGING=y
> # CONFIG_SCSI_SCAN_ASYNC is not set
> CONFIG_SCSI_WAIT_SCAN=m
>
> #
> # SCSI Transports
> #
> CONFIG_SCSI_SPI_ATTRS=m
> CONFIG_SCSI_FC_ATTRS=m
> CONFIG_SCSI_ISCSI_ATTRS=m
> CONFIG_SCSI_SAS_ATTRS=m
> CONFIG_SCSI_SAS_LIBSAS=m
> CONFIG_SCSI_SAS_ATA=y
> CONFIG_SCSI_SAS_HOST_SMP=y
> # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
> CONFIG_SCSI_SRP_ATTRS=m
> CONFIG_SCSI_LOWLEVEL=y
> CONFIG_ISCSI_TCP=m
> # CONFIG_SCSI_CXGB3_ISCSI is not set
> CONFIG_BLK_DEV_3W_XXXX_RAID=m
> CONFIG_SCSI_3W_9XXX=m
> CONFIG_SCSI_ACARD=m
> CONFIG_SCSI_AACRAID=m
> CONFIG_SCSI_AIC7XXX=m
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
> CONFIG_AIC7XXX_DEBUG_MASK=0
> # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC7XXX_OLD=m
> CONFIG_SCSI_AIC79XX=m
> CONFIG_AIC79XX_CMDS_PER_DEVICE=4
> CONFIG_AIC79XX_RESET_DELAY_MS=15000
> # CONFIG_AIC79XX_DEBUG_ENABLE is not set
> CONFIG_AIC79XX_DEBUG_MASK=0
> # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
> CONFIG_SCSI_AIC94XX=m
> # CONFIG_AIC94XX_DEBUG is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> CONFIG_SCSI_ARCMSR=m
> # CONFIG_SCSI_ARCMSR_AER is not set
> CONFIG_MEGARAID_NEWGEN=y
> CONFIG_MEGARAID_MM=m
> CONFIG_MEGARAID_MAILBOX=m
> CONFIG_MEGARAID_LEGACY=m
> CONFIG_MEGARAID_SAS=m
> # CONFIG_SCSI_MPT2SAS is not set
> CONFIG_SCSI_HPTIOP=m
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_LIBFC is not set
> # CONFIG_LIBFCOE is not set
> # CONFIG_FCOE is not set
> # CONFIG_FCOE_FNIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> CONFIG_SCSI_GDTH=m
> CONFIG_SCSI_IPS=m
> CONFIG_SCSI_INITIO=m
> # CONFIG_SCSI_INIA100 is not set
> CONFIG_SCSI_PPA=m
> CONFIG_SCSI_IMM=m
> # CONFIG_SCSI_IZIP_EPP16 is not set
> # CONFIG_SCSI_IZIP_SLOW_CTR is not set
> # CONFIG_SCSI_MVSAS is not set
> CONFIG_SCSI_STEX=m
> CONFIG_SCSI_SYM53C8XX_2=m
> CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
> CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
> CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
> CONFIG_SCSI_SYM53C8XX_MMIO=y
> # CONFIG_SCSI_IPR is not set
> CONFIG_SCSI_QLOGIC_1280=m
> CONFIG_SCSI_QLA_FC=m
> CONFIG_SCSI_QLA_ISCSI=m
> CONFIG_SCSI_LPFC=m
> # CONFIG_SCSI_LPFC_DEBUG_FS is not set
> CONFIG_SCSI_DC395x=m
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_DEBUG is not set
> # CONFIG_SCSI_SRP is not set
> # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
> # CONFIG_SCSI_DH is not set
> # CONFIG_SCSI_OSD_INITIATOR is not set
> CONFIG_ATA=m
> # CONFIG_ATA_NONSTANDARD is not set
> CONFIG_ATA_ACPI=y
> CONFIG_SATA_PMP=y
> CONFIG_SATA_AHCI=m
> CONFIG_SATA_SIL24=m
> CONFIG_ATA_SFF=y
> CONFIG_SATA_SVW=m
> CONFIG_ATA_PIIX=m
> CONFIG_SATA_MV=m
> CONFIG_SATA_NV=m
> CONFIG_PDC_ADMA=m
> CONFIG_SATA_QSTOR=m
> CONFIG_SATA_PROMISE=m
> CONFIG_SATA_SX4=m
> CONFIG_SATA_SIL=m
> CONFIG_SATA_SIS=m
> CONFIG_SATA_ULI=m
> CONFIG_SATA_VIA=m
> CONFIG_SATA_VITESSE=m
> CONFIG_SATA_INIC162X=m
> # CONFIG_PATA_ACPI is not set
> # CONFIG_PATA_ALI is not set
> # CONFIG_PATA_AMD is not set
> # CONFIG_PATA_ARTOP is not set
> # CONFIG_PATA_ATIIXP is not set
> # CONFIG_PATA_CMD640_PCI is not set
> # CONFIG_PATA_CMD64X is not set
> # CONFIG_PATA_CS5520 is not set
> # CONFIG_PATA_CS5530 is not set
> # CONFIG_PATA_CYPRESS is not set
> # CONFIG_PATA_EFAR is not set
> # CONFIG_ATA_GENERIC is not set
> # CONFIG_PATA_HPT366 is not set
> # CONFIG_PATA_HPT37X is not set
> # CONFIG_PATA_HPT3X2N is not set
> # CONFIG_PATA_HPT3X3 is not set
> # CONFIG_PATA_IT821X is not set
> # CONFIG_PATA_IT8213 is not set
> # CONFIG_PATA_JMICRON is not set
> # CONFIG_PATA_TRIFLEX is not set
> CONFIG_PATA_MARVELL=m
> # CONFIG_PATA_MPIIX is not set
> # CONFIG_PATA_OLDPIIX is not set
> # CONFIG_PATA_NETCELL is not set
> # CONFIG_PATA_NINJA32 is not set
> # CONFIG_PATA_NS87410 is not set
> # CONFIG_PATA_NS87415 is not set
> # CONFIG_PATA_OPTI is not set
> # CONFIG_PATA_OPTIDMA is not set
> # CONFIG_PATA_PCMCIA is not set
> # CONFIG_PATA_PDC_OLD is not set
> # CONFIG_PATA_RADISYS is not set
> # CONFIG_PATA_RZ1000 is not set
> # CONFIG_PATA_SC1200 is not set
> # CONFIG_PATA_SERVERWORKS is not set
> CONFIG_PATA_PDC2027X=m
> # CONFIG_PATA_SIL680 is not set
> CONFIG_PATA_SIS=m
> # CONFIG_PATA_VIA is not set
> # CONFIG_PATA_WINBOND is not set
> # CONFIG_PATA_SCH is not set
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=y
> CONFIG_MD_AUTODETECT=y
> CONFIG_MD_LINEAR=m
> CONFIG_MD_RAID0=m
> CONFIG_MD_RAID1=m
> CONFIG_MD_RAID10=m
> CONFIG_MD_RAID456=m
> CONFIG_MD_RAID6_PQ=m
> CONFIG_MD_MULTIPATH=m
> CONFIG_MD_FAULTY=m
> CONFIG_BLK_DEV_DM=m
> # CONFIG_DM_DEBUG is not set
> CONFIG_DM_CRYPT=m
> CONFIG_DM_SNAPSHOT=m
> CONFIG_DM_MIRROR=m
> CONFIG_DM_ZERO=m
> CONFIG_DM_MULTIPATH=m
> # CONFIG_DM_DELAY is not set
> CONFIG_DM_UEVENT=y
> CONFIG_FUSION=y
> CONFIG_FUSION_SPI=m
> CONFIG_FUSION_FC=m
> CONFIG_FUSION_SAS=m
> CONFIG_FUSION_MAX_SGE=128
> CONFIG_FUSION_CTL=m
> CONFIG_FUSION_LAN=m
> CONFIG_FUSION_LOGGING=y
>
> #
> # IEEE 1394 (FireWire) support
> #
>
> #
> # Enable only one of the two stacks, unless you know what you are doing
> #
> CONFIG_FIREWIRE=m
> CONFIG_FIREWIRE_OHCI=m
> CONFIG_FIREWIRE_OHCI_DEBUG=y
> CONFIG_FIREWIRE_SBP2=m
> # CONFIG_IEEE1394 is not set
> CONFIG_I2O=m
> # CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
> CONFIG_I2O_EXT_ADAPTEC=y
> CONFIG_I2O_EXT_ADAPTEC_DMA64=y
> CONFIG_I2O_CONFIG=m
> CONFIG_I2O_CONFIG_OLD_IOCTL=y
> CONFIG_I2O_BUS=m
> CONFIG_I2O_BLOCK=m
> CONFIG_I2O_SCSI=m
> CONFIG_I2O_PROC=m
> # CONFIG_MACINTOSH_DRIVERS is not set
> CONFIG_NETDEVICES=y
> CONFIG_COMPAT_NET_DEV_OPS=y
> CONFIG_IFB=m
> CONFIG_DUMMY=m
> CONFIG_BONDING=m
> # CONFIG_MACVLAN is not set
> # CONFIG_EQUALIZER is not set
> CONFIG_TUN=m
> # CONFIG_VETH is not set
> # CONFIG_NET_SB1000 is not set
> # CONFIG_ARCNET is not set
> CONFIG_PHYLIB=m
>
> #
> # MII PHY device drivers
> #
> CONFIG_MARVELL_PHY=m
> CONFIG_DAVICOM_PHY=m
> CONFIG_QSEMI_PHY=m
> CONFIG_LXT_PHY=m
> CONFIG_CICADA_PHY=m
> CONFIG_VITESSE_PHY=m
> CONFIG_SMSC_PHY=m
> # CONFIG_BROADCOM_PHY is not set
> # CONFIG_ICPLUS_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_STE10XP is not set
> # CONFIG_LSI_ET1011C_PHY is not set
> # CONFIG_MDIO_BITBANG is not set
> CONFIG_NET_ETHERNET=y
> CONFIG_MII=m
> CONFIG_HAPPYMEAL=m
> CONFIG_SUNGEM=m
> CONFIG_CASSINI=m
> CONFIG_NET_VENDOR_3COM=y
> CONFIG_VORTEX=m
> CONFIG_TYPHOON=m
> # CONFIG_ETHOC is not set
> # CONFIG_DNET is not set
> CONFIG_NET_TULIP=y
> CONFIG_DE2104X=m
> CONFIG_TULIP=m
> # CONFIG_TULIP_MWI is not set
> CONFIG_TULIP_MMIO=y
> # CONFIG_TULIP_NAPI is not set
> CONFIG_DE4X5=m
> CONFIG_WINBOND_840=m
> CONFIG_DM9102=m
> CONFIG_ULI526X=m
> CONFIG_PCMCIA_XIRCOM=m
> # CONFIG_HP100 is not set
> # CONFIG_IBM_NEW_EMAC_ZMII is not set
> # CONFIG_IBM_NEW_EMAC_RGMII is not set
> # CONFIG_IBM_NEW_EMAC_TAH is not set
> # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
> # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
> # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
> # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
> CONFIG_NET_PCI=y
> CONFIG_PCNET32=m
> CONFIG_AMD8111_ETH=m
> CONFIG_ADAPTEC_STARFIRE=m
> CONFIG_B44=m
> CONFIG_B44_PCI_AUTOSELECT=y
> CONFIG_B44_PCICORE_AUTOSELECT=y
> CONFIG_B44_PCI=y
> CONFIG_FORCEDETH=m
> # CONFIG_FORCEDETH_NAPI is not set
> CONFIG_E100=m
> CONFIG_FEALNX=m
> CONFIG_NATSEMI=m
> CONFIG_NE2K_PCI=m
> CONFIG_8139CP=m
> CONFIG_8139TOO=m
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> CONFIG_8139TOO_8129=y
> # CONFIG_8139_OLD_RX_RESET is not set
> # CONFIG_R6040 is not set
> CONFIG_SIS900=m
> CONFIG_EPIC100=m
> # CONFIG_SMSC9420 is not set
> CONFIG_SUNDANCE=m
> # CONFIG_SUNDANCE_MMIO is not set
> # CONFIG_TLAN is not set
> CONFIG_VIA_RHINE=m
> CONFIG_VIA_RHINE_MMIO=y
> # CONFIG_SC92031 is not set
> CONFIG_NET_POCKET=y
> # CONFIG_ATP is not set
> # CONFIG_DE600 is not set
> # CONFIG_DE620 is not set
> # CONFIG_ATL2 is not set
> CONFIG_NETDEV_1000=y
> CONFIG_ACENIC=m
> # CONFIG_ACENIC_OMIT_TIGON_I is not set
> CONFIG_DL2K=m
> CONFIG_E1000=m
> CONFIG_E1000E=m
> # CONFIG_IP1000 is not set
> CONFIG_IGB=m
> # CONFIG_IGBVF is not set
> CONFIG_NS83820=m
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> CONFIG_R8169=m
> CONFIG_R8169_VLAN=y
> CONFIG_SIS190=m
> CONFIG_SKGE=m
> # CONFIG_SKGE_DEBUG is not set
> CONFIG_SKY2=m
> # CONFIG_SKY2_DEBUG is not set
> CONFIG_VIA_VELOCITY=m
> CONFIG_TIGON3=m
> CONFIG_BNX2=m
> CONFIG_QLA3XXX=m
> # CONFIG_ATL1 is not set
> # CONFIG_ATL1E is not set
> # CONFIG_ATL1C is not set
> # CONFIG_JME is not set
> CONFIG_NETDEV_10000=y
> CONFIG_CHELSIO_T1=m
> # CONFIG_CHELSIO_T1_1G is not set
> CONFIG_CHELSIO_T3_DEPENDS=y
> CONFIG_CHELSIO_T3=m
> # CONFIG_ENIC is not set
> CONFIG_IXGBE=m
> CONFIG_IXGB=m
> CONFIG_S2IO=m
> # CONFIG_VXGE is not set
> CONFIG_MYRI10GE=m
> CONFIG_NETXEN_NIC=m
> # CONFIG_NIU is not set
> # CONFIG_MLX4_EN is not set
> CONFIG_MLX4_CORE=m
> CONFIG_MLX4_DEBUG=y
> # CONFIG_TEHUTI is not set
> CONFIG_BNX2X=m
> # CONFIG_QLGE is not set
> # CONFIG_SFC is not set
> # CONFIG_BE2NET is not set
> CONFIG_TR=y
> CONFIG_IBMOL=m
> CONFIG_3C359=m
> # CONFIG_TMS380TR is not set
>
> #
> # Wireless LAN
> #
> # CONFIG_WLAN_PRE80211 is not set
> # CONFIG_WLAN_80211 is not set
>
> #
> # Enable WiMAX (Networking options) to see the WiMAX drivers
> #
>
> #
> # USB Network Adapters
> #
> CONFIG_USB_CATC=m
> CONFIG_USB_KAWETH=m
> CONFIG_USB_PEGASUS=m
> CONFIG_USB_RTL8150=m
> CONFIG_USB_USBNET=m
> CONFIG_USB_NET_AX8817X=m
> CONFIG_USB_NET_CDCETHER=m
> # CONFIG_USB_NET_CDC_EEM is not set
> CONFIG_USB_NET_DM9601=m
> # CONFIG_USB_NET_SMSC95XX is not set
> CONFIG_USB_NET_GL620A=m
> CONFIG_USB_NET_NET1080=m
> CONFIG_USB_NET_PLUSB=m
> # CONFIG_USB_NET_MCS7830 is not set
> CONFIG_USB_NET_RNDIS_HOST=m
> CONFIG_USB_NET_CDC_SUBSET=m
> CONFIG_USB_ALI_M5632=y
> CONFIG_USB_AN2720=y
> CONFIG_USB_BELKIN=y
> CONFIG_USB_ARMLINUX=y
> CONFIG_USB_EPSON2888=y
> # CONFIG_USB_KC2190 is not set
> CONFIG_USB_NET_ZAURUS=m
> # CONFIG_USB_HSO is not set
> CONFIG_NET_PCMCIA=y
> CONFIG_PCMCIA_3C589=m
> CONFIG_PCMCIA_3C574=m
> CONFIG_PCMCIA_FMVJ18X=m
> CONFIG_PCMCIA_PCNET=m
> CONFIG_PCMCIA_NMCLAN=m
> CONFIG_PCMCIA_SMC91C92=m
> CONFIG_PCMCIA_XIRC2PS=m
> CONFIG_PCMCIA_AXNET=m
> # CONFIG_PCMCIA_IBMTR is not set
> # CONFIG_WAN is not set
> CONFIG_ATM_DRIVERS=y
> # CONFIG_ATM_DUMMY is not set
> CONFIG_ATM_TCP=m
> CONFIG_ATM_LANAI=m
> CONFIG_ATM_ENI=m
> # CONFIG_ATM_ENI_DEBUG is not set
> # CONFIG_ATM_ENI_TUNE_BURST is not set
> CONFIG_ATM_FIRESTREAM=m
> # CONFIG_ATM_ZATM is not set
> CONFIG_ATM_IDT77252=m
> # CONFIG_ATM_IDT77252_DEBUG is not set
> # CONFIG_ATM_IDT77252_RCV_ALL is not set
> CONFIG_ATM_IDT77252_USE_SUNI=y
> CONFIG_ATM_AMBASSADOR=m
> # CONFIG_ATM_AMBASSADOR_DEBUG is not set
> CONFIG_ATM_HORIZON=m
> # CONFIG_ATM_HORIZON_DEBUG is not set
> # CONFIG_ATM_IA is not set
> # CONFIG_ATM_FORE200E is not set
> CONFIG_ATM_HE=m
> # CONFIG_ATM_HE_USE_SUNI is not set
> # CONFIG_ATM_SOLOS is not set
> CONFIG_FDDI=y
> # CONFIG_DEFXX is not set
> # CONFIG_SKFP is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_FILTER=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> # CONFIG_PPP_BSDCOMP is not set
> CONFIG_PPP_MPPE=m
> CONFIG_PPPOE=m
> CONFIG_PPPOATM=m
> # CONFIG_PPPOL2TP is not set
> CONFIG_SLIP=m
> CONFIG_SLIP_COMPRESSED=y
> CONFIG_SLHC=m
> CONFIG_SLIP_SMART=y
> # CONFIG_SLIP_MODE_SLIP6 is not set
> CONFIG_NET_FC=y
> CONFIG_NETCONSOLE=m
> # CONFIG_NETCONSOLE_DYNAMIC is not set
> CONFIG_NETPOLL=y
> CONFIG_NETPOLL_TRAP=y
> CONFIG_NET_POLL_CONTROLLER=y
> # CONFIG_ISDN is not set
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
> CONFIG_INPUT_FF_MEMLESS=y
> CONFIG_INPUT_POLLDEV=m
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> CONFIG_INPUT_JOYDEV=m
> CONFIG_INPUT_EVDEV=y
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> CONFIG_KEYBOARD_ATKBD=y
> # CONFIG_KEYBOARD_SUNKBD is not set
> # CONFIG_KEYBOARD_LKKBD is not set
> # CONFIG_KEYBOARD_XTKBD is not set
> # CONFIG_KEYBOARD_NEWTON is not set
> # CONFIG_KEYBOARD_STOWAWAY is not set
> CONFIG_INPUT_MOUSE=y
> CONFIG_MOUSE_PS2=y
> CONFIG_MOUSE_PS2_ALPS=y
> CONFIG_MOUSE_PS2_LOGIPS2PP=y
> CONFIG_MOUSE_PS2_SYNAPTICS=y
> CONFIG_MOUSE_PS2_LIFEBOOK=y
> CONFIG_MOUSE_PS2_TRACKPOINT=y
> # CONFIG_MOUSE_PS2_ELANTECH is not set
> # CONFIG_MOUSE_PS2_TOUCHKIT is not set
> CONFIG_MOUSE_SERIAL=m
> # CONFIG_MOUSE_APPLETOUCH is not set
> # CONFIG_MOUSE_BCM5974 is not set
> CONFIG_MOUSE_VSXXXAA=m
> CONFIG_INPUT_JOYSTICK=y
> # CONFIG_JOYSTICK_ANALOG is not set
> # CONFIG_JOYSTICK_A3D is not set
> # CONFIG_JOYSTICK_ADI is not set
> # CONFIG_JOYSTICK_COBRA is not set
> # CONFIG_JOYSTICK_GF2K is not set
> # CONFIG_JOYSTICK_GRIP is not set
> # CONFIG_JOYSTICK_GRIP_MP is not set
> # CONFIG_JOYSTICK_GUILLEMOT is not set
> # CONFIG_JOYSTICK_INTERACT is not set
> # CONFIG_JOYSTICK_SIDEWINDER is not set
> # CONFIG_JOYSTICK_TMDC is not set
> # CONFIG_JOYSTICK_IFORCE is not set
> # CONFIG_JOYSTICK_WARRIOR is not set
> # CONFIG_JOYSTICK_MAGELLAN is not set
> # CONFIG_JOYSTICK_SPACEORB is not set
> # CONFIG_JOYSTICK_SPACEBALL is not set
> # CONFIG_JOYSTICK_STINGER is not set
> CONFIG_JOYSTICK_TWIDJOY=m
> # CONFIG_JOYSTICK_ZHENHUA is not set
> # CONFIG_JOYSTICK_DB9 is not set
> # CONFIG_JOYSTICK_GAMECON is not set
> # CONFIG_JOYSTICK_TURBOGRAFX is not set
> CONFIG_JOYSTICK_JOYDUMP=m
> # CONFIG_JOYSTICK_XPAD is not set
> # CONFIG_INPUT_TABLET is not set
> CONFIG_INPUT_TOUCHSCREEN=y
> # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
> # CONFIG_TOUCHSCREEN_AD7879 is not set
> # CONFIG_TOUCHSCREEN_FUJITSU is not set
> CONFIG_TOUCHSCREEN_GUNZE=m
> CONFIG_TOUCHSCREEN_ELO=m
> # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
> CONFIG_TOUCHSCREEN_MTOUCH=m
> # CONFIG_TOUCHSCREEN_INEXIO is not set
> CONFIG_TOUCHSCREEN_MK712=m
> # CONFIG_TOUCHSCREEN_PENMOUNT is not set
> # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
> # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
> # CONFIG_TOUCHSCREEN_WM97XX is not set
> # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
> # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
> # CONFIG_TOUCHSCREEN_TSC2007 is not set
> CONFIG_INPUT_MISC=y
> CONFIG_INPUT_PCSPKR=m
> # CONFIG_INPUT_APANEL is not set
> # CONFIG_INPUT_ATLAS_BTNS is not set
> # CONFIG_INPUT_ATI_REMOTE is not set
> # CONFIG_INPUT_ATI_REMOTE2 is not set
> # CONFIG_INPUT_KEYSPAN_REMOTE is not set
> # CONFIG_INPUT_POWERMATE is not set
> # CONFIG_INPUT_YEALINK is not set
> # CONFIG_INPUT_CM109 is not set
> CONFIG_INPUT_UINPUT=m
>
> #
> # Hardware I/O ports
> #
> CONFIG_SERIO=y
> CONFIG_SERIO_I8042=y
> CONFIG_SERIO_SERPORT=y
> # CONFIG_SERIO_CT82C710 is not set
> # CONFIG_SERIO_PARKBD is not set
> # CONFIG_SERIO_PCIPS2 is not set
> CONFIG_SERIO_LIBPS2=y
> CONFIG_SERIO_RAW=m
> CONFIG_GAMEPORT=m
> CONFIG_GAMEPORT_NS558=m
> CONFIG_GAMEPORT_L4=m
> CONFIG_GAMEPORT_EMU10K1=m
> CONFIG_GAMEPORT_FM801=m
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_CONSOLE_TRANSLATIONS=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> CONFIG_VT_HW_CONSOLE_BINDING=y
> CONFIG_DEVKMEM=y
> CONFIG_SERIAL_NONSTANDARD=y
> # CONFIG_COMPUTONE is not set
> # CONFIG_ROCKETPORT is not set
> CONFIG_CYCLADES=m
> # CONFIG_CYZ_INTR is not set
> # CONFIG_DIGIEPCA is not set
> # CONFIG_MOXA_INTELLIO is not set
> # CONFIG_MOXA_SMARTIO is not set
> # CONFIG_ISI is not set
> CONFIG_SYNCLINK=m
> CONFIG_SYNCLINKMP=m
> CONFIG_SYNCLINK_GT=m
> CONFIG_N_HDLC=m
> # CONFIG_RISCOM8 is not set
> # CONFIG_SPECIALIX is not set
> # CONFIG_SX is not set
> # CONFIG_RIO is not set
> # CONFIG_STALDRV is not set
> # CONFIG_NOZOMI is not set
>
> #
> # Serial drivers
> #
> CONFIG_SERIAL_8250=y
> CONFIG_SERIAL_8250_CONSOLE=y
> CONFIG_FIX_EARLYCON_MEM=y
> CONFIG_SERIAL_8250_PCI=y
> CONFIG_SERIAL_8250_PNP=y
> CONFIG_SERIAL_8250_CS=m
> CONFIG_SERIAL_8250_NR_UARTS=32
> CONFIG_SERIAL_8250_RUNTIME_UARTS=4
> CONFIG_SERIAL_8250_EXTENDED=y
> CONFIG_SERIAL_8250_MANY_PORTS=y
> CONFIG_SERIAL_8250_SHARE_IRQ=y
> CONFIG_SERIAL_8250_DETECT_IRQ=y
> CONFIG_SERIAL_8250_RSA=y
>
> #
> # Non-8250 serial port support
> #
> CONFIG_SERIAL_CORE=y
> CONFIG_SERIAL_CORE_CONSOLE=y
> CONFIG_SERIAL_JSM=m
> CONFIG_UNIX98_PTYS=y
> # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
> # CONFIG_LEGACY_PTYS is not set
> CONFIG_PRINTER=m
> CONFIG_LP_CONSOLE=y
> CONFIG_PPDEV=m
> CONFIG_IPMI_HANDLER=m
> CONFIG_IPMI_PANIC_EVENT=y
> CONFIG_IPMI_PANIC_STRING=y
> CONFIG_IPMI_DEVICE_INTERFACE=m
> CONFIG_IPMI_SI=m
> CONFIG_IPMI_WATCHDOG=m
> CONFIG_IPMI_POWEROFF=m
> CONFIG_HW_RANDOM=y
> # CONFIG_HW_RANDOM_TIMERIOMEM is not set
> CONFIG_HW_RANDOM_INTEL=m
> CONFIG_HW_RANDOM_AMD=m
> CONFIG_NVRAM=y
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> CONFIG_CARDMAN_4000=m
> CONFIG_CARDMAN_4040=m
> # CONFIG_IPWIRELESS is not set
> # CONFIG_MWAVE is not set
> CONFIG_PC8736x_GPIO=m
> CONFIG_NSC_GPIO=m
> CONFIG_RAW_DRIVER=y
> CONFIG_MAX_RAW_DEVS=8192
> CONFIG_HPET=y
> # CONFIG_HPET_MMAP is not set
> CONFIG_HANGCHECK_TIMER=m
> CONFIG_TCG_TPM=m
> CONFIG_TCG_TIS=m
> CONFIG_TCG_NSC=m
> CONFIG_TCG_ATMEL=m
> CONFIG_TCG_INFINEON=m
> CONFIG_TELCLOCK=m
> CONFIG_DEVPORT=y
> CONFIG_I2C=m
> CONFIG_I2C_BOARDINFO=y
> CONFIG_I2C_CHARDEV=m
> CONFIG_I2C_HELPER_AUTO=y
> CONFIG_I2C_ALGOBIT=m
>
> #
> # I2C Hardware Bus support
> #
>
> #
> # PC SMBus host controller drivers
> #
> # CONFIG_I2C_ALI1535 is not set
> # CONFIG_I2C_ALI1563 is not set
> # CONFIG_I2C_ALI15X3 is not set
> CONFIG_I2C_AMD756=m
> CONFIG_I2C_AMD756_S4882=m
> CONFIG_I2C_AMD8111=m
> CONFIG_I2C_I801=m
> # CONFIG_I2C_ISCH is not set
> CONFIG_I2C_PIIX4=m
> CONFIG_I2C_NFORCE2=m
> # CONFIG_I2C_NFORCE2_S4985 is not set
> # CONFIG_I2C_SIS5595 is not set
> # CONFIG_I2C_SIS630 is not set
> CONFIG_I2C_SIS96X=m
> CONFIG_I2C_VIA=m
> CONFIG_I2C_VIAPRO=m
>
> #
> # I2C system bus drivers (mostly embedded / system-on-chip)
> #
> # CONFIG_I2C_OCORES is not set
> # CONFIG_I2C_SIMTEC is not set
>
> #
> # External I2C/SMBus adapter drivers
> #
> CONFIG_I2C_PARPORT=m
> CONFIG_I2C_PARPORT_LIGHT=m
> # CONFIG_I2C_TAOS_EVM is not set
> # CONFIG_I2C_TINY_USB is not set
>
> #
> # Graphics adapter I2C/DDC channel drivers
> #
> CONFIG_I2C_VOODOO3=m
>
> #
> # Other I2C/SMBus bus drivers
> #
> # CONFIG_I2C_PCA_PLATFORM is not set
> CONFIG_I2C_STUB=m
>
> #
> # Miscellaneous I2C Chip support
> #
> # CONFIG_DS1682 is not set
> CONFIG_SENSORS_PCF8574=m
> # CONFIG_PCF8575 is not set
> CONFIG_SENSORS_PCA9539=m
> CONFIG_SENSORS_MAX6875=m
> # CONFIG_SENSORS_TSL2550 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> # CONFIG_I2C_DEBUG_CHIP is not set
> # CONFIG_SPI is not set
> CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
> # CONFIG_GPIOLIB is not set
> # CONFIG_W1 is not set
> CONFIG_POWER_SUPPLY=y
> # CONFIG_POWER_SUPPLY_DEBUG is not set
> # CONFIG_PDA_POWER is not set
> # CONFIG_BATTERY_DS2760 is not set
> # CONFIG_BATTERY_BQ27x00 is not set
> CONFIG_HWMON=m
> CONFIG_HWMON_VID=m
> CONFIG_SENSORS_ABITUGURU=m
> # CONFIG_SENSORS_ABITUGURU3 is not set
> # CONFIG_SENSORS_AD7414 is not set
> # CONFIG_SENSORS_AD7418 is not set
> CONFIG_SENSORS_ADM1021=m
> CONFIG_SENSORS_ADM1025=m
> CONFIG_SENSORS_ADM1026=m
> # CONFIG_SENSORS_ADM1029 is not set
> CONFIG_SENSORS_ADM1031=m
> CONFIG_SENSORS_ADM9240=m
> # CONFIG_SENSORS_ADT7462 is not set
> # CONFIG_SENSORS_ADT7470 is not set
> # CONFIG_SENSORS_ADT7473 is not set
> # CONFIG_SENSORS_ADT7475 is not set
> CONFIG_SENSORS_K8TEMP=m
> CONFIG_SENSORS_ASB100=m
> # CONFIG_SENSORS_ATK0110 is not set
> CONFIG_SENSORS_ATXP1=m
> CONFIG_SENSORS_DS1621=m
> # CONFIG_SENSORS_I5K_AMB is not set
> CONFIG_SENSORS_F71805F=m
> # CONFIG_SENSORS_F71882FG is not set
> # CONFIG_SENSORS_F75375S is not set
> CONFIG_SENSORS_FSCHER=m
> CONFIG_SENSORS_FSCPOS=m
> # CONFIG_SENSORS_FSCHMD is not set
> # CONFIG_SENSORS_G760A is not set
> CONFIG_SENSORS_GL518SM=m
> CONFIG_SENSORS_GL520SM=m
> # CONFIG_SENSORS_CORETEMP is not set
> # CONFIG_SENSORS_IBMAEM is not set
> # CONFIG_SENSORS_IBMPEX is not set
> CONFIG_SENSORS_IT87=m
> CONFIG_SENSORS_LM63=m
> CONFIG_SENSORS_LM75=m
> CONFIG_SENSORS_LM77=m
> CONFIG_SENSORS_LM78=m
> CONFIG_SENSORS_LM80=m
> CONFIG_SENSORS_LM83=m
> CONFIG_SENSORS_LM85=m
> CONFIG_SENSORS_LM87=m
> CONFIG_SENSORS_LM90=m
> CONFIG_SENSORS_LM92=m
> # CONFIG_SENSORS_LM93 is not set
> # CONFIG_SENSORS_LTC4215 is not set
> # CONFIG_SENSORS_LTC4245 is not set
> # CONFIG_SENSORS_LM95241 is not set
> CONFIG_SENSORS_MAX1619=m
> # CONFIG_SENSORS_MAX6650 is not set
> CONFIG_SENSORS_PC87360=m
> # CONFIG_SENSORS_PC87427 is not set
> CONFIG_SENSORS_PCF8591=m
> CONFIG_SENSORS_SIS5595=m
> # CONFIG_SENSORS_DME1737 is not set
> CONFIG_SENSORS_SMSC47M1=m
> CONFIG_SENSORS_SMSC47M192=m
> CONFIG_SENSORS_SMSC47B397=m
> # CONFIG_SENSORS_ADS7828 is not set
> # CONFIG_SENSORS_THMC50 is not set
> CONFIG_SENSORS_VIA686A=m
> # CONFIG_SENSORS_VT1211 is not set
> CONFIG_SENSORS_VT8231=m
> CONFIG_SENSORS_W83781D=m
> CONFIG_SENSORS_W83791D=m
> CONFIG_SENSORS_W83792D=m
> # CONFIG_SENSORS_W83793 is not set
> CONFIG_SENSORS_W83L785TS=m
> # CONFIG_SENSORS_W83L786NG is not set
> CONFIG_SENSORS_W83627HF=m
> CONFIG_SENSORS_W83627EHF=m
> CONFIG_SENSORS_HDAPS=m
> # CONFIG_SENSORS_LIS3LV02D is not set
> # CONFIG_SENSORS_APPLESMC is not set
> # CONFIG_HWMON_DEBUG_CHIP is not set
> CONFIG_THERMAL=y
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> CONFIG_SOFT_WATCHDOG=m
> # CONFIG_ACQUIRE_WDT is not set
> # CONFIG_ADVANTECH_WDT is not set
> CONFIG_ALIM1535_WDT=m
> CONFIG_ALIM7101_WDT=m
> # CONFIG_SC520_WDT is not set
> # CONFIG_EUROTECH_WDT is not set
> # CONFIG_IB700_WDT is not set
> CONFIG_IBMASR=m
> # CONFIG_WAFER_WDT is not set
> CONFIG_I6300ESB_WDT=m
> # CONFIG_ITCO_WDT is not set
> # CONFIG_IT8712F_WDT is not set
> # CONFIG_IT87_WDT is not set
> # CONFIG_HP_WATCHDOG is not set
> # CONFIG_SC1200_WDT is not set
> # CONFIG_PC87413_WDT is not set
> # CONFIG_60XX_WDT is not set
> # CONFIG_SBC8360_WDT is not set
> # CONFIG_CPU5_WDT is not set
> # CONFIG_SMSC_SCH311X_WDT is not set
> # CONFIG_SMSC37B787_WDT is not set
> CONFIG_W83627HF_WDT=m
> # CONFIG_W83697HF_WDT is not set
> # CONFIG_W83697UG_WDT is not set
> CONFIG_W83877F_WDT=m
> CONFIG_W83977F_WDT=m
> CONFIG_MACHZ_WDT=m
> # CONFIG_SBC_EPX_C3_WATCHDOG is not set
>
> #
> # PCI-based Watchdog Cards
> #
> CONFIG_PCIPCWATCHDOG=m
> CONFIG_WDTPCI=m
> CONFIG_WDT_501_PCI=y
>
> #
> # USB-based Watchdog Cards
> #
> CONFIG_USBPCWATCHDOG=m
> CONFIG_SSB_POSSIBLE=y
>
> #
> # Sonics Silicon Backplane
> #
> CONFIG_SSB=m
> CONFIG_SSB_SPROM=y
> CONFIG_SSB_PCIHOST_POSSIBLE=y
> CONFIG_SSB_PCIHOST=y
> # CONFIG_SSB_B43_PCI_BRIDGE is not set
> CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
> # CONFIG_SSB_PCMCIAHOST is not set
> # CONFIG_SSB_DEBUG is not set
> CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
> CONFIG_SSB_DRIVER_PCICORE=y
>
> #
> # Multifunction device drivers
> #
> # CONFIG_MFD_CORE is not set
> # CONFIG_MFD_SM501 is not set
> # CONFIG_HTC_PASIC3 is not set
> # CONFIG_MFD_TMIO is not set
> # CONFIG_MFD_WM8400 is not set
> # CONFIG_MFD_WM8350_I2C is not set
> # CONFIG_MFD_PCF50633 is not set
> # CONFIG_REGULATOR is not set
>
> #
> # Multimedia devices
> #
>
> #
> # Multimedia core support
> #
> CONFIG_VIDEO_DEV=m
> CONFIG_VIDEO_V4L2_COMMON=m
> CONFIG_VIDEO_ALLOW_V4L1=y
> CONFIG_VIDEO_V4L1_COMPAT=y
> # CONFIG_DVB_CORE is not set
> CONFIG_VIDEO_MEDIA=m
>
> #
> # Multimedia drivers
> #
> # CONFIG_MEDIA_ATTACH is not set
> CONFIG_MEDIA_TUNER=m
> # CONFIG_MEDIA_TUNER_CUSTOMISE is not set
> CONFIG_MEDIA_TUNER_SIMPLE=m
> CONFIG_MEDIA_TUNER_TDA8290=m
> CONFIG_MEDIA_TUNER_TDA9887=m
> CONFIG_MEDIA_TUNER_TEA5761=m
> CONFIG_MEDIA_TUNER_TEA5767=m
> CONFIG_MEDIA_TUNER_MT20XX=m
> CONFIG_MEDIA_TUNER_XC2028=m
> CONFIG_MEDIA_TUNER_XC5000=m
> CONFIG_MEDIA_TUNER_MC44S803=m
> CONFIG_VIDEO_V4L2=m
> CONFIG_VIDEO_V4L1=m
> CONFIG_VIDEOBUF_GEN=m
> CONFIG_VIDEOBUF_DMA_SG=m
> CONFIG_VIDEOBUF_VMALLOC=m
> CONFIG_VIDEO_BTCX=m
> CONFIG_VIDEO_IR=m
> CONFIG_VIDEO_TVEEPROM=m
> CONFIG_VIDEO_TUNER=m
> CONFIG_VIDEO_CAPTURE_DRIVERS=y
> # CONFIG_VIDEO_ADV_DEBUG is not set
> # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
> CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
> CONFIG_VIDEO_IR_I2C=m
> CONFIG_VIDEO_TVAUDIO=m
> CONFIG_VIDEO_TDA7432=m
> CONFIG_VIDEO_MSP3400=m
> CONFIG_VIDEO_CS53L32A=m
> CONFIG_VIDEO_WM8775=m
> CONFIG_VIDEO_SAA6588=m
> CONFIG_VIDEO_SAA711X=m
> CONFIG_VIDEO_TVP5150=m
> CONFIG_VIDEO_CX25840=m
> CONFIG_VIDEO_CX2341X=m
> # CONFIG_VIDEO_VIVI is not set
> CONFIG_VIDEO_BT848=m
> # CONFIG_VIDEO_BWQCAM is not set
> # CONFIG_VIDEO_CQCAM is not set
> # CONFIG_VIDEO_W9966 is not set
> # CONFIG_VIDEO_CPIA is not set
> CONFIG_VIDEO_CPIA2=m
> # CONFIG_VIDEO_SAA5246A is not set
> # CONFIG_VIDEO_SAA5249 is not set
> # CONFIG_VIDEO_STRADIS is not set
> # CONFIG_VIDEO_ZORAN is not set
> # CONFIG_VIDEO_SAA7134 is not set
> # CONFIG_VIDEO_MXB is not set
> # CONFIG_VIDEO_HEXIUM_ORION is not set
> # CONFIG_VIDEO_HEXIUM_GEMINI is not set
> # CONFIG_VIDEO_CX88 is not set
> # CONFIG_VIDEO_IVTV is not set
> # CONFIG_VIDEO_CAFE_CCIC is not set
> # CONFIG_SOC_CAMERA is not set
> CONFIG_V4L_USB_DRIVERS=y
> # CONFIG_USB_VIDEO_CLASS is not set
> CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
> CONFIG_USB_GSPCA=m
> # CONFIG_USB_M5602 is not set
> # CONFIG_USB_STV06XX is not set
> # CONFIG_USB_GSPCA_CONEX is not set
> # CONFIG_USB_GSPCA_ETOMS is not set
> # CONFIG_USB_GSPCA_FINEPIX is not set
> # CONFIG_USB_GSPCA_MARS is not set
> # CONFIG_USB_GSPCA_MR97310A is not set
> # CONFIG_USB_GSPCA_OV519 is not set
> # CONFIG_USB_GSPCA_OV534 is not set
> # CONFIG_USB_GSPCA_PAC207 is not set
> # CONFIG_USB_GSPCA_PAC7311 is not set
> # CONFIG_USB_GSPCA_SONIXB is not set
> # CONFIG_USB_GSPCA_SONIXJ is not set
> # CONFIG_USB_GSPCA_SPCA500 is not set
> # CONFIG_USB_GSPCA_SPCA501 is not set
> # CONFIG_USB_GSPCA_SPCA505 is not set
> # CONFIG_USB_GSPCA_SPCA506 is not set
> # CONFIG_USB_GSPCA_SPCA508 is not set
> # CONFIG_USB_GSPCA_SPCA561 is not set
> # CONFIG_USB_GSPCA_SQ905 is not set
> # CONFIG_USB_GSPCA_SQ905C is not set
> # CONFIG_USB_GSPCA_STK014 is not set
> # CONFIG_USB_GSPCA_SUNPLUS is not set
> # CONFIG_USB_GSPCA_T613 is not set
> # CONFIG_USB_GSPCA_TV8532 is not set
> # CONFIG_USB_GSPCA_VC032X is not set
> # CONFIG_USB_GSPCA_ZC3XX is not set
> CONFIG_VIDEO_PVRUSB2=m
> CONFIG_VIDEO_PVRUSB2_SYSFS=y
> # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
> # CONFIG_VIDEO_HDPVR is not set
> CONFIG_VIDEO_EM28XX=m
> # CONFIG_VIDEO_EM28XX_ALSA is not set
> # CONFIG_VIDEO_CX231XX is not set
> # CONFIG_VIDEO_USBVISION is not set
> CONFIG_VIDEO_USBVIDEO=m
> CONFIG_USB_VICAM=m
> CONFIG_USB_IBMCAM=m
> CONFIG_USB_KONICAWC=m
> CONFIG_USB_QUICKCAM_MESSENGER=m
> CONFIG_USB_ET61X251=m
> CONFIG_VIDEO_OVCAMCHIP=m
> CONFIG_USB_W9968CF=m
> CONFIG_USB_OV511=m
> CONFIG_USB_SE401=m
> CONFIG_USB_SN9C102=m
> CONFIG_USB_STV680=m
> CONFIG_USB_ZC0301=m
> CONFIG_USB_PWC=m
> # CONFIG_USB_PWC_DEBUG is not set
> CONFIG_USB_PWC_INPUT_EVDEV=y
> # CONFIG_USB_ZR364XX is not set
> # CONFIG_USB_STKWEBCAM is not set
> # CONFIG_USB_S2255 is not set
> CONFIG_RADIO_ADAPTERS=y
> # CONFIG_RADIO_GEMTEK_PCI is not set
> # CONFIG_RADIO_MAXIRADIO is not set
> # CONFIG_RADIO_MAESTRO is not set
> CONFIG_USB_DSBR=m
> # CONFIG_USB_SI470X is not set
> # CONFIG_USB_MR800 is not set
> # CONFIG_RADIO_TEA5764 is not set
> # CONFIG_DAB is not set
>
> #
> # Graphics support
> #
> CONFIG_AGP=y
> CONFIG_AGP_AMD64=y
> CONFIG_AGP_INTEL=y
> CONFIG_AGP_SIS=y
> CONFIG_AGP_VIA=y
> CONFIG_DRM=m
> # CONFIG_DRM_TDFX is not set
> CONFIG_DRM_R128=m
> CONFIG_DRM_RADEON=m
> CONFIG_DRM_I810=m
> CONFIG_DRM_I830=m
> CONFIG_DRM_I915=m
> # CONFIG_DRM_I915_KMS is not set
> CONFIG_DRM_MGA=m
> # CONFIG_DRM_SIS is not set
> CONFIG_DRM_VIA=m
> CONFIG_DRM_SAVAGE=m
> CONFIG_VGASTATE=m
> CONFIG_VIDEO_OUTPUT_CONTROL=m
> CONFIG_FB=y
> # CONFIG_FIRMWARE_EDID is not set
> CONFIG_FB_DDC=m
> CONFIG_FB_BOOT_VESA_SUPPORT=y
> CONFIG_FB_CFB_FILLRECT=y
> CONFIG_FB_CFB_COPYAREA=y
> CONFIG_FB_CFB_IMAGEBLIT=y
> # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
> # CONFIG_FB_SYS_FILLRECT is not set
> # CONFIG_FB_SYS_COPYAREA is not set
> # CONFIG_FB_SYS_IMAGEBLIT is not set
> # CONFIG_FB_FOREIGN_ENDIAN is not set
> # CONFIG_FB_SYS_FOPS is not set
> # CONFIG_FB_SVGALIB is not set
> # CONFIG_FB_MACMODES is not set
> CONFIG_FB_BACKLIGHT=y
> CONFIG_FB_MODE_HELPERS=y
> CONFIG_FB_TILEBLITTING=y
>
> #
> # Frame buffer hardware drivers
> #
> CONFIG_FB_CIRRUS=m
> # CONFIG_FB_PM2 is not set
> # CONFIG_FB_CYBER2000 is not set
> # CONFIG_FB_ARC is not set
> # CONFIG_FB_ASILIANT is not set
> # CONFIG_FB_IMSTT is not set
> CONFIG_FB_VGA16=m
> # CONFIG_FB_UVESA is not set
> CONFIG_FB_VESA=y
> # CONFIG_FB_N411 is not set
> # CONFIG_FB_HGA is not set
> # CONFIG_FB_S1D13XXX is not set
> CONFIG_FB_NVIDIA=m
> CONFIG_FB_NVIDIA_I2C=y
> # CONFIG_FB_NVIDIA_DEBUG is not set
> CONFIG_FB_NVIDIA_BACKLIGHT=y
> CONFIG_FB_RIVA=m
> # CONFIG_FB_RIVA_I2C is not set
> # CONFIG_FB_RIVA_DEBUG is not set
> CONFIG_FB_RIVA_BACKLIGHT=y
> # CONFIG_FB_LE80578 is not set
> CONFIG_FB_INTEL=m
> # CONFIG_FB_INTEL_DEBUG is not set
> CONFIG_FB_INTEL_I2C=y
> # CONFIG_FB_MATROX is not set
> # CONFIG_FB_RADEON is not set
> # CONFIG_FB_ATY128 is not set
> # CONFIG_FB_ATY is not set
> # CONFIG_FB_S3 is not set
> CONFIG_FB_SAVAGE=m
> CONFIG_FB_SAVAGE_I2C=y
> CONFIG_FB_SAVAGE_ACCEL=y
> # CONFIG_FB_SIS is not set
> # CONFIG_FB_VIA is not set
> # CONFIG_FB_NEOMAGIC is not set
> CONFIG_FB_KYRO=m
> # CONFIG_FB_3DFX is not set
> # CONFIG_FB_VOODOO1 is not set
> # CONFIG_FB_VT8623 is not set
> # CONFIG_FB_TRIDENT is not set
> # CONFIG_FB_ARK is not set
> # CONFIG_FB_PM3 is not set
> # CONFIG_FB_CARMINE is not set
> # CONFIG_FB_GEODE is not set
> # CONFIG_FB_VIRTUAL is not set
> # CONFIG_FB_METRONOME is not set
> # CONFIG_FB_MB862XX is not set
> # CONFIG_FB_BROADSHEET is not set
> CONFIG_BACKLIGHT_LCD_SUPPORT=y
> CONFIG_LCD_CLASS_DEVICE=m
> # CONFIG_LCD_ILI9320 is not set
> # CONFIG_LCD_PLATFORM is not set
> CONFIG_BACKLIGHT_CLASS_DEVICE=y
> CONFIG_BACKLIGHT_GENERIC=y
> # CONFIG_BACKLIGHT_PROGEAR is not set
> # CONFIG_BACKLIGHT_MBP_NVIDIA is not set
> # CONFIG_BACKLIGHT_SAHARA is not set
>
> #
> # Display device support
> #
> # CONFIG_DISPLAY_SUPPORT is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VGACON_SOFT_SCROLLBACK=y
> CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
> CONFIG_DUMMY_CONSOLE=y
> CONFIG_FRAMEBUFFER_CONSOLE=y
> # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
> CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
> # CONFIG_FONTS is not set
> CONFIG_FONT_8x8=y
> CONFIG_FONT_8x16=y
> CONFIG_LOGO=y
> # CONFIG_LOGO_LINUX_MONO is not set
> # CONFIG_LOGO_LINUX_VGA16 is not set
> CONFIG_LOGO_LINUX_CLUT224=y
> CONFIG_SOUND=m
> CONFIG_SOUND_OSS_CORE=y
> CONFIG_SND=m
> CONFIG_SND_TIMER=m
> CONFIG_SND_PCM=m
> CONFIG_SND_HWDEP=m
> CONFIG_SND_RAWMIDI=m
> CONFIG_SND_JACK=y
> CONFIG_SND_SEQUENCER=m
> CONFIG_SND_SEQ_DUMMY=m
> CONFIG_SND_OSSEMUL=y
> CONFIG_SND_MIXER_OSS=m
> CONFIG_SND_PCM_OSS=m
> CONFIG_SND_PCM_OSS_PLUGINS=y
> CONFIG_SND_SEQUENCER_OSS=y
> CONFIG_SND_DYNAMIC_MINORS=y
> # CONFIG_SND_SUPPORT_OLD_API is not set
> CONFIG_SND_VERBOSE_PROCFS=y
> # CONFIG_SND_VERBOSE_PRINTK is not set
> # CONFIG_SND_DEBUG is not set
> CONFIG_SND_VMASTER=y
> CONFIG_SND_MPU401_UART=m
> CONFIG_SND_OPL3_LIB=m
> CONFIG_SND_VX_LIB=m
> CONFIG_SND_AC97_CODEC=m
> CONFIG_SND_DRIVERS=y
> CONFIG_SND_DUMMY=m
> CONFIG_SND_VIRMIDI=m
> CONFIG_SND_MTPAV=m
> # CONFIG_SND_MTS64 is not set
> # CONFIG_SND_SERIAL_U16550 is not set
> CONFIG_SND_MPU401=m
> # CONFIG_SND_PORTMAN2X4 is not set
> # CONFIG_SND_AC97_POWER_SAVE is not set
> CONFIG_SND_SB_COMMON=m
> CONFIG_SND_PCI=y
> CONFIG_SND_AD1889=m
> CONFIG_SND_ALS300=m
> CONFIG_SND_ALS4000=m
> CONFIG_SND_ALI5451=m
> CONFIG_SND_ATIIXP=m
> CONFIG_SND_ATIIXP_MODEM=m
> CONFIG_SND_AU8810=m
> CONFIG_SND_AU8820=m
> CONFIG_SND_AU8830=m
> # CONFIG_SND_AW2 is not set
> CONFIG_SND_AZT3328=m
> CONFIG_SND_BT87X=m
> # CONFIG_SND_BT87X_OVERCLOCK is not set
> CONFIG_SND_CA0106=m
> CONFIG_SND_CMIPCI=m
> # CONFIG_SND_OXYGEN is not set
> CONFIG_SND_CS4281=m
> CONFIG_SND_CS46XX=m
> CONFIG_SND_CS46XX_NEW_DSP=y
> # CONFIG_SND_CS5530 is not set
> CONFIG_SND_DARLA20=m
> CONFIG_SND_GINA20=m
> CONFIG_SND_LAYLA20=m
> CONFIG_SND_DARLA24=m
> CONFIG_SND_GINA24=m
> CONFIG_SND_LAYLA24=m
> CONFIG_SND_MONA=m
> CONFIG_SND_MIA=m
> CONFIG_SND_ECHO3G=m
> CONFIG_SND_INDIGO=m
> CONFIG_SND_INDIGOIO=m
> CONFIG_SND_INDIGODJ=m
> # CONFIG_SND_INDIGOIOX is not set
> # CONFIG_SND_INDIGODJX is not set
> CONFIG_SND_EMU10K1=m
> CONFIG_SND_EMU10K1X=m
> CONFIG_SND_ENS1370=m
> CONFIG_SND_ENS1371=m
> CONFIG_SND_ES1938=m
> CONFIG_SND_ES1968=m
> CONFIG_SND_FM801=m
> CONFIG_SND_FM801_TEA575X_BOOL=y
> CONFIG_SND_FM801_TEA575X=m
> CONFIG_SND_HDA_INTEL=m
> # CONFIG_SND_HDA_HWDEP is not set
> # CONFIG_SND_HDA_INPUT_BEEP is not set
> CONFIG_SND_HDA_CODEC_REALTEK=y
> CONFIG_SND_HDA_CODEC_ANALOG=y
> CONFIG_SND_HDA_CODEC_SIGMATEL=y
> CONFIG_SND_HDA_CODEC_VIA=y
> CONFIG_SND_HDA_CODEC_ATIHDMI=y
> CONFIG_SND_HDA_CODEC_NVHDMI=y
> CONFIG_SND_HDA_CODEC_INTELHDMI=y
> CONFIG_SND_HDA_ELD=y
> CONFIG_SND_HDA_CODEC_CONEXANT=y
> CONFIG_SND_HDA_CODEC_CMEDIA=y
> CONFIG_SND_HDA_CODEC_SI3054=y
> CONFIG_SND_HDA_GENERIC=y
> # CONFIG_SND_HDA_POWER_SAVE is not set
> CONFIG_SND_HDSP=m
> CONFIG_SND_HDSPM=m
> # CONFIG_SND_HIFIER is not set
> CONFIG_SND_ICE1712=m
> CONFIG_SND_ICE1724=m
> CONFIG_SND_INTEL8X0=m
> CONFIG_SND_INTEL8X0M=m
> CONFIG_SND_KORG1212=m
> CONFIG_SND_MAESTRO3=m
> CONFIG_SND_MIXART=m
> CONFIG_SND_NM256=m
> CONFIG_SND_PCXHR=m
> CONFIG_SND_RIPTIDE=m
> CONFIG_SND_RME32=m
> CONFIG_SND_RME96=m
> CONFIG_SND_RME9652=m
> CONFIG_SND_SONICVIBES=m
> CONFIG_SND_TRIDENT=m
> CONFIG_SND_VIA82XX=m
> CONFIG_SND_VIA82XX_MODEM=m
> # CONFIG_SND_VIRTUOSO is not set
> CONFIG_SND_VX222=m
> CONFIG_SND_YMFPCI=m
> CONFIG_SND_USB=y
> CONFIG_SND_USB_AUDIO=m
> CONFIG_SND_USB_USX2Y=m
> # CONFIG_SND_USB_CAIAQ is not set
> # CONFIG_SND_USB_US122L is not set
> CONFIG_SND_PCMCIA=y
> # CONFIG_SND_VXPOCKET is not set
> # CONFIG_SND_PDAUDIOCF is not set
> # CONFIG_SND_SOC is not set
> # CONFIG_SOUND_PRIME is not set
> CONFIG_AC97_BUS=m
> CONFIG_HID_SUPPORT=y
> CONFIG_HID=y
> CONFIG_HID_DEBUG=y
> # CONFIG_HIDRAW is not set
>
> #
> # USB Input Devices
> #
> CONFIG_USB_HID=y
> CONFIG_HID_PID=y
> CONFIG_USB_HIDDEV=y
>
> #
> # Special HID drivers
> #
> CONFIG_HID_A4TECH=y
> CONFIG_HID_APPLE=y
> CONFIG_HID_BELKIN=y
> CONFIG_HID_CHERRY=y
> CONFIG_HID_CHICONY=y
> CONFIG_HID_CYPRESS=y
> # CONFIG_DRAGONRISE_FF is not set
> CONFIG_HID_EZKEY=y
> CONFIG_HID_KYE=y
> CONFIG_HID_GYRATION=y
> CONFIG_HID_KENSINGTON=y
> CONFIG_HID_LOGITECH=y
> CONFIG_LOGITECH_FF=y
> # CONFIG_LOGIRUMBLEPAD2_FF is not set
> CONFIG_HID_MICROSOFT=y
> CONFIG_HID_MONTEREY=y
> CONFIG_HID_NTRIG=y
> CONFIG_HID_PANTHERLORD=y
> # CONFIG_PANTHERLORD_FF is not set
> CONFIG_HID_PETALYNX=y
> CONFIG_HID_SAMSUNG=y
> CONFIG_HID_SONY=y
> CONFIG_HID_SUNPLUS=y
> # CONFIG_GREENASIA_FF is not set
> CONFIG_HID_TOPSEED=y
> CONFIG_THRUSTMASTER_FF=y
> # CONFIG_ZEROPLUS_FF is not set
> CONFIG_USB_SUPPORT=y
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> CONFIG_USB_ARCH_HAS_EHCI=y
> CONFIG_USB=y
> # CONFIG_USB_DEBUG is not set
> # CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
>
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> CONFIG_USB_DEVICE_CLASS=y
> # CONFIG_USB_DYNAMIC_MINORS is not set
> # CONFIG_USB_SUSPEND is not set
> # CONFIG_USB_OTG is not set
> CONFIG_USB_MON=y
> # CONFIG_USB_WUSB is not set
> # CONFIG_USB_WUSB_CBAF is not set
>
> #
> # USB Host Controller Drivers
> #
> # CONFIG_USB_C67X00_HCD is not set
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_EHCI_ROOT_HUB_TT=y
> CONFIG_USB_EHCI_TT_NEWSCHED=y
> # CONFIG_USB_OXU210HP_HCD is not set
> CONFIG_USB_ISP116X_HCD=m
> # CONFIG_USB_ISP1760_HCD is not set
> CONFIG_USB_OHCI_HCD=m
> # CONFIG_USB_OHCI_HCD_SSB is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
> # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
> CONFIG_USB_OHCI_LITTLE_ENDIAN=y
> CONFIG_USB_UHCI_HCD=m
> CONFIG_USB_SL811_HCD=m
> CONFIG_USB_SL811_CS=m
> # CONFIG_USB_R8A66597_HCD is not set
> # CONFIG_USB_WHCI_HCD is not set
> # CONFIG_USB_HWA_HCD is not set
>
> #
> # USB Device Class drivers
> #
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=m
> # CONFIG_USB_WDM is not set
> # CONFIG_USB_TMC is not set
>
> #
> # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
> #
>
> #
> # also be needed; see USB_STORAGE Help for more info
> #
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=m
> CONFIG_USB_STORAGE_FREECOM=m
> CONFIG_USB_STORAGE_ISD200=m
> CONFIG_USB_STORAGE_USBAT=m
> CONFIG_USB_STORAGE_SDDR09=m
> CONFIG_USB_STORAGE_SDDR55=m
> CONFIG_USB_STORAGE_JUMPSHOT=m
> CONFIG_USB_STORAGE_ALAUDA=m
> # CONFIG_USB_STORAGE_ONETOUCH is not set
> # CONFIG_USB_STORAGE_KARMA is not set
> # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
> # CONFIG_USB_LIBUSUAL is not set
>
> #
> # USB Imaging devices
> #
> CONFIG_USB_MDC800=m
> CONFIG_USB_MICROTEK=m
>
> #
> # USB port drivers
> #
> CONFIG_USB_USS720=m
> CONFIG_USB_SERIAL=m
> CONFIG_USB_EZUSB=y
> CONFIG_USB_SERIAL_GENERIC=y
> # CONFIG_USB_SERIAL_AIRCABLE is not set
> CONFIG_USB_SERIAL_ARK3116=m
> CONFIG_USB_SERIAL_BELKIN=m
> # CONFIG_USB_SERIAL_CH341 is not set
> CONFIG_USB_SERIAL_WHITEHEAT=m
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> # CONFIG_USB_SERIAL_CP210X is not set
> CONFIG_USB_SERIAL_CYPRESS_M8=m
> CONFIG_USB_SERIAL_EMPEG=m
> CONFIG_USB_SERIAL_FTDI_SIO=m
> CONFIG_USB_SERIAL_FUNSOFT=m
> CONFIG_USB_SERIAL_VISOR=m
> CONFIG_USB_SERIAL_IPAQ=m
> CONFIG_USB_SERIAL_IR=m
> CONFIG_USB_SERIAL_EDGEPORT=m
> CONFIG_USB_SERIAL_EDGEPORT_TI=m
> CONFIG_USB_SERIAL_GARMIN=m
> CONFIG_USB_SERIAL_IPW=m
> # CONFIG_USB_SERIAL_IUU is not set
> CONFIG_USB_SERIAL_KEYSPAN_PDA=m
> CONFIG_USB_SERIAL_KEYSPAN=m
> CONFIG_USB_SERIAL_KEYSPAN_MPR=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
> CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19=y
> CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
> CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
> CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
> CONFIG_USB_SERIAL_KLSI=m
> CONFIG_USB_SERIAL_KOBIL_SCT=m
> CONFIG_USB_SERIAL_MCT_U232=m
> # CONFIG_USB_SERIAL_MOS7720 is not set
> # CONFIG_USB_SERIAL_MOS7840 is not set
> # CONFIG_USB_SERIAL_MOTOROLA is not set
> CONFIG_USB_SERIAL_NAVMAN=m
> CONFIG_USB_SERIAL_PL2303=m
> # CONFIG_USB_SERIAL_OTI6858 is not set
> # CONFIG_USB_SERIAL_QUALCOMM is not set
> # CONFIG_USB_SERIAL_SPCP8X5 is not set
> CONFIG_USB_SERIAL_HP4X=m
> CONFIG_USB_SERIAL_SAFE=m
> CONFIG_USB_SERIAL_SAFE_PADDED=y
> # CONFIG_USB_SERIAL_SIEMENS_MPI is not set
> CONFIG_USB_SERIAL_SIERRAWIRELESS=m
> # CONFIG_USB_SERIAL_SYMBOL is not set
> CONFIG_USB_SERIAL_TI=m
> CONFIG_USB_SERIAL_CYBERJACK=m
> CONFIG_USB_SERIAL_XIRCOM=m
> CONFIG_USB_SERIAL_OPTION=m
> CONFIG_USB_SERIAL_OMNINET=m
> # CONFIG_USB_SERIAL_OPTICON is not set
> # CONFIG_USB_SERIAL_DEBUG is not set
>
> #
> # USB Miscellaneous drivers
> #
> CONFIG_USB_EMI62=m
> CONFIG_USB_EMI26=m
> # CONFIG_USB_ADUTUX is not set
> # CONFIG_USB_SEVSEG is not set
> CONFIG_USB_RIO500=m
> CONFIG_USB_LEGOTOWER=m
> CONFIG_USB_LCD=m
> # CONFIG_USB_BERRY_CHARGE is not set
> CONFIG_USB_LED=m
> # CONFIG_USB_CYPRESS_CY7C63 is not set
> # CONFIG_USB_CYTHERM is not set
> CONFIG_USB_IDMOUSE=m
> # CONFIG_USB_FTDI_ELAN is not set
> CONFIG_USB_APPLEDISPLAY=m
> CONFIG_USB_SISUSBVGA=m
> CONFIG_USB_SISUSBVGA_CON=y
> CONFIG_USB_LD=m
> # CONFIG_USB_TRANCEVIBRATOR is not set
> # CONFIG_USB_IOWARRIOR is not set
> CONFIG_USB_TEST=m
> # CONFIG_USB_ISIGHTFW is not set
> # CONFIG_USB_VST is not set
> CONFIG_USB_ATM=m
> CONFIG_USB_SPEEDTOUCH=m
> CONFIG_USB_CXACRU=m
> CONFIG_USB_UEAGLEATM=m
> CONFIG_USB_XUSBATM=m
> # CONFIG_USB_GADGET is not set
>
> #
> # OTG and related infrastructure
> #
> # CONFIG_NOP_USB_XCEIV is not set
> # CONFIG_UWB is not set
> CONFIG_MMC=m
> # CONFIG_MMC_DEBUG is not set
> # CONFIG_MMC_UNSAFE_RESUME is not set
>
> #
> # MMC/SD/SDIO Card Drivers
> #
> CONFIG_MMC_BLOCK=m
> CONFIG_MMC_BLOCK_BOUNCE=y
> # CONFIG_SDIO_UART is not set
> # CONFIG_MMC_TEST is not set
>
> #
> # MMC/SD/SDIO Host Controller Drivers
> #
> CONFIG_MMC_SDHCI=m
> # CONFIG_MMC_SDHCI_PCI is not set
> CONFIG_MMC_WBSD=m
> # CONFIG_MMC_TIFM_SD is not set
> # CONFIG_MMC_SDRICOH_CS is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_NEW_LEDS=y
> CONFIG_LEDS_CLASS=y
>
> #
> # LED drivers
> #
> # CONFIG_LEDS_ALIX2 is not set
> # CONFIG_LEDS_PCA9532 is not set
> # CONFIG_LEDS_LP5521 is not set
> # CONFIG_LEDS_CLEVO_MAIL is not set
> # CONFIG_LEDS_PCA955X is not set
> # CONFIG_LEDS_BD2802 is not set
>
> #
> # LED Triggers
> #
> CONFIG_LEDS_TRIGGERS=y
> CONFIG_LEDS_TRIGGER_TIMER=m
> CONFIG_LEDS_TRIGGER_IDE_DISK=y
> CONFIG_LEDS_TRIGGER_HEARTBEAT=m
> # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
> # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
>
> #
> # iptables trigger is under Netfilter config (LED target)
> #
> # CONFIG_ACCESSIBILITY is not set
> CONFIG_INFINIBAND=m
> CONFIG_INFINIBAND_USER_MAD=m
> CONFIG_INFINIBAND_USER_ACCESS=m
> CONFIG_INFINIBAND_USER_MEM=y
> CONFIG_INFINIBAND_ADDR_TRANS=y
> CONFIG_INFINIBAND_MTHCA=m
> CONFIG_INFINIBAND_MTHCA_DEBUG=y
> CONFIG_INFINIBAND_IPATH=m
> CONFIG_INFINIBAND_AMSO1100=m
> # CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
> CONFIG_INFINIBAND_CXGB3=m
> # CONFIG_INFINIBAND_CXGB3_DEBUG is not set
> CONFIG_MLX4_INFINIBAND=m
> CONFIG_INFINIBAND_NES=m
> # CONFIG_INFINIBAND_NES_DEBUG is not set
> CONFIG_INFINIBAND_IPOIB=m
> CONFIG_INFINIBAND_IPOIB_CM=y
> CONFIG_INFINIBAND_IPOIB_DEBUG=y
> # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
> CONFIG_INFINIBAND_SRP=m
> CONFIG_INFINIBAND_ISER=m
> CONFIG_EDAC=y
>
> #
> # Reporting subsystems
> #
> # CONFIG_EDAC_DEBUG is not set
> CONFIG_EDAC_MM_EDAC=m
> CONFIG_EDAC_E752X=m
> # CONFIG_EDAC_I82975X is not set
> CONFIG_EDAC_I3000=m
> # CONFIG_EDAC_X38 is not set
> # CONFIG_EDAC_I5400 is not set
> CONFIG_EDAC_I5000=m
> # CONFIG_EDAC_I5100 is not set
> CONFIG_RTC_LIB=m
> CONFIG_RTC_CLASS=m
>
> #
> # RTC interfaces
> #
> CONFIG_RTC_INTF_SYSFS=y
> CONFIG_RTC_INTF_PROC=y
> CONFIG_RTC_INTF_DEV=y
> # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
> # CONFIG_RTC_DRV_TEST is not set
>
> #
> # I2C RTC drivers
> #
> CONFIG_RTC_DRV_DS1307=m
> # CONFIG_RTC_DRV_DS1374 is not set
> CONFIG_RTC_DRV_DS1672=m
> # CONFIG_RTC_DRV_MAX6900 is not set
> CONFIG_RTC_DRV_RS5C372=m
> CONFIG_RTC_DRV_ISL1208=m
> CONFIG_RTC_DRV_X1205=m
> CONFIG_RTC_DRV_PCF8563=m
> CONFIG_RTC_DRV_PCF8583=m
> # CONFIG_RTC_DRV_M41T80 is not set
> # CONFIG_RTC_DRV_S35390A is not set
> # CONFIG_RTC_DRV_FM3130 is not set
> # CONFIG_RTC_DRV_RX8581 is not set
>
> #
> # SPI RTC drivers
> #
>
> #
> # Platform RTC drivers
> #
> CONFIG_RTC_DRV_CMOS=m
> # CONFIG_RTC_DRV_DS1286 is not set
> # CONFIG_RTC_DRV_DS1511 is not set
> CONFIG_RTC_DRV_DS1553=m
> CONFIG_RTC_DRV_DS1742=m
> # CONFIG_RTC_DRV_STK17TA8 is not set
> # CONFIG_RTC_DRV_M48T86 is not set
> # CONFIG_RTC_DRV_M48T35 is not set
> # CONFIG_RTC_DRV_M48T59 is not set
> # CONFIG_RTC_DRV_BQ4802 is not set
> CONFIG_RTC_DRV_V3020=m
>
> #
> # on-CPU RTC drivers
> #
> # CONFIG_DMADEVICES is not set
> # CONFIG_AUXDISPLAY is not set
> # CONFIG_UIO is not set
> # CONFIG_STAGING is not set
> CONFIG_X86_PLATFORM_DEVICES=y
> # CONFIG_ACER_WMI is not set
> # CONFIG_ASUS_LAPTOP is not set
> # CONFIG_FUJITSU_LAPTOP is not set
> # CONFIG_MSI_LAPTOP is not set
> # CONFIG_PANASONIC_LAPTOP is not set
> # CONFIG_COMPAL_LAPTOP is not set
> # CONFIG_SONY_LAPTOP is not set
> # CONFIG_THINKPAD_ACPI is not set
> # CONFIG_INTEL_MENLOW is not set
> # CONFIG_EEEPC_LAPTOP is not set
> # CONFIG_ACPI_WMI is not set
> CONFIG_ACPI_ASUS=m
> CONFIG_ACPI_TOSHIBA=m
>
> #
> # Firmware Drivers
> #
> CONFIG_EDD=m
> # CONFIG_EDD_OFF is not set
> CONFIG_FIRMWARE_MEMMAP=y
> CONFIG_DELL_RBU=m
> CONFIG_DCDBAS=m
> CONFIG_DMIID=y
> CONFIG_ISCSI_IBFT_FIND=y
> CONFIG_ISCSI_IBFT=m
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> CONFIG_EXT2_FS_XATTR=y
> CONFIG_EXT2_FS_POSIX_ACL=y
> CONFIG_EXT2_FS_SECURITY=y
> CONFIG_EXT2_FS_XIP=y
> CONFIG_EXT3_FS=m
> # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> CONFIG_EXT3_FS_SECURITY=y
> # CONFIG_EXT4_FS is not set
> CONFIG_FS_XIP=y
> CONFIG_JBD=m
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> CONFIG_FS_POSIX_ACL=y
> CONFIG_FILE_LOCKING=y
> # CONFIG_XFS_FS is not set
> CONFIG_GFS2_FS=m
> # CONFIG_GFS2_FS_LOCKING_DLM is not set
> # CONFIG_OCFS2_FS is not set
> # CONFIG_BTRFS_FS is not set
> CONFIG_DNOTIFY=y
> CONFIG_INOTIFY=y
> CONFIG_INOTIFY_USER=y
> CONFIG_QUOTA=y
> # CONFIG_QUOTA_NETLINK_INTERFACE is not set
> CONFIG_PRINT_QUOTA_WARNING=y
> CONFIG_QUOTA_TREE=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> # CONFIG_AUTOFS_FS is not set
> CONFIG_AUTOFS4_FS=m
> # CONFIG_FUSE_FS is not set
>
> #
> # Caches
> #
> CONFIG_FSCACHE=m
> # CONFIG_FSCACHE_STATS is not set
> # CONFIG_FSCACHE_HISTOGRAM is not set
> # CONFIG_FSCACHE_DEBUG is not set
> CONFIG_CACHEFILES=m
> CONFIG_CACHEFILES_DEBUG=y
> # CONFIG_CACHEFILES_HISTOGRAM is not set
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_UDF_FS=m
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> CONFIG_VFAT_FS=m
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_PROC_VMCORE=y
> CONFIG_PROC_SYSCTL=y
> CONFIG_PROC_PAGE_MONITOR=y
> CONFIG_SYSFS=y
> CONFIG_TMPFS=y
> # CONFIG_TMPFS_POSIX_ACL is not set
> CONFIG_HUGETLBFS=y
> CONFIG_HUGETLB_PAGE=y
> CONFIG_CONFIGFS_FS=m
> CONFIG_MISC_FILESYSTEMS=y
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> CONFIG_ECRYPT_FS=m
> CONFIG_HFS_FS=m
> CONFIG_HFSPLUS_FS=m
> # CONFIG_BEFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_EFS_FS is not set
> CONFIG_JFFS2_FS=m
> CONFIG_JFFS2_FS_DEBUG=0
> CONFIG_JFFS2_FS_WRITEBUFFER=y
> # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
> CONFIG_JFFS2_SUMMARY=y
> # CONFIG_JFFS2_FS_XATTR is not set
> # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> CONFIG_JFFS2_ZLIB=y
> # CONFIG_JFFS2_LZO is not set
> CONFIG_JFFS2_RTIME=y
> # CONFIG_JFFS2_RUBIN is not set
> CONFIG_CRAMFS=m
> CONFIG_SQUASHFS=m
> # CONFIG_SQUASHFS_EMBEDDED is not set
> CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
> CONFIG_VXFS_FS=m
> # CONFIG_MINIX_FS is not set
> # CONFIG_OMFS_FS is not set
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> # CONFIG_SYSV_FS is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_NILFS2_FS is not set
> CONFIG_NETWORK_FILESYSTEMS=y
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFS_V3_ACL=y
> CONFIG_NFS_V4=y
> CONFIG_NFS_FSCACHE=y
> CONFIG_NFSD=m
> CONFIG_NFSD_V2_ACL=y
> CONFIG_NFSD_V3=y
> CONFIG_NFSD_V3_ACL=y
> CONFIG_NFSD_V4=y
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_EXPORTFS=m
> CONFIG_NFS_ACL_SUPPORT=m
> CONFIG_NFS_COMMON=y
> CONFIG_SUNRPC=m
> CONFIG_SUNRPC_GSS=m
> CONFIG_SUNRPC_XPRT_RDMA=m
> CONFIG_RPCSEC_GSS_KRB5=m
> CONFIG_RPCSEC_GSS_SPKM3=m
> # CONFIG_SMB_FS is not set
> CONFIG_CIFS=m
> # CONFIG_CIFS_STATS is not set
> CONFIG_CIFS_WEAK_PW_HASH=y
> # CONFIG_CIFS_UPCALL is not set
> CONFIG_CIFS_XATTR=y
> CONFIG_CIFS_POSIX=y
> # CONFIG_CIFS_DEBUG2 is not set
> # CONFIG_CIFS_DFS_UPCALL is not set
> # CONFIG_CIFS_EXPERIMENTAL is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_CODA_FS is not set
> # CONFIG_AFS_FS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> CONFIG_OSF_PARTITION=y
> CONFIG_AMIGA_PARTITION=y
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> CONFIG_KARMA_PARTITION=y
> CONFIG_EFI_PARTITION=y
> # CONFIG_SYSV68_PARTITION is not set
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="utf8"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=m
> CONFIG_NLS_CODEPAGE_775=m
> CONFIG_NLS_CODEPAGE_850=m
> CONFIG_NLS_CODEPAGE_852=m
> CONFIG_NLS_CODEPAGE_855=m
> CONFIG_NLS_CODEPAGE_857=m
> CONFIG_NLS_CODEPAGE_860=m
> CONFIG_NLS_CODEPAGE_861=m
> CONFIG_NLS_CODEPAGE_862=m
> CONFIG_NLS_CODEPAGE_863=m
> CONFIG_NLS_CODEPAGE_864=m
> CONFIG_NLS_CODEPAGE_865=m
> CONFIG_NLS_CODEPAGE_866=m
> CONFIG_NLS_CODEPAGE_869=m
> CONFIG_NLS_CODEPAGE_936=m
> CONFIG_NLS_CODEPAGE_950=m
> CONFIG_NLS_CODEPAGE_932=m
> CONFIG_NLS_CODEPAGE_949=m
> CONFIG_NLS_CODEPAGE_874=m
> CONFIG_NLS_ISO8859_8=m
> CONFIG_NLS_CODEPAGE_1250=m
> CONFIG_NLS_CODEPAGE_1251=m
> CONFIG_NLS_ASCII=y
> CONFIG_NLS_ISO8859_1=m
> CONFIG_NLS_ISO8859_2=m
> CONFIG_NLS_ISO8859_3=m
> CONFIG_NLS_ISO8859_4=m
> CONFIG_NLS_ISO8859_5=m
> CONFIG_NLS_ISO8859_6=m
> CONFIG_NLS_ISO8859_7=m
> CONFIG_NLS_ISO8859_9=m
> CONFIG_NLS_ISO8859_13=m
> CONFIG_NLS_ISO8859_14=m
> CONFIG_NLS_ISO8859_15=m
> CONFIG_NLS_KOI8_R=m
> CONFIG_NLS_KOI8_U=m
> CONFIG_NLS_UTF8=m
> CONFIG_DLM=m
> CONFIG_DLM_DEBUG=y
>
> #
> # Kernel hacking
> #
> CONFIG_TRACE_IRQFLAGS_SUPPORT=y
> # CONFIG_PRINTK_TIME is not set
> CONFIG_ENABLE_WARN_DEPRECATED=y
> CONFIG_ENABLE_MUST_CHECK=y
> CONFIG_FRAME_WARN=2048
> CONFIG_MAGIC_SYSRQ=y
> # CONFIG_UNUSED_SYMBOLS is not set
> CONFIG_DEBUG_FS=y
> # CONFIG_HEADERS_CHECK is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_DEBUG_SHIRQ is not set
> CONFIG_DETECT_SOFTLOCKUP=y
> # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
> CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
> CONFIG_DETECT_HUNG_TASK=y
> # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
> CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
> CONFIG_SCHED_DEBUG=y
> CONFIG_SCHEDSTATS=y
> # CONFIG_TIMER_STATS is not set
> # CONFIG_DEBUG_OBJECTS is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_RT_MUTEXES is not set
> # CONFIG_RT_MUTEX_TESTER is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> # CONFIG_DEBUG_MUTEXES is not set
> # CONFIG_DEBUG_LOCK_ALLOC is not set
> # CONFIG_PROVE_LOCKING is not set
> # CONFIG_LOCK_STAT is not set
> # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
> # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
> CONFIG_STACKTRACE=y
> # CONFIG_DEBUG_KOBJECT is not set
> CONFIG_DEBUG_BUGVERBOSE=y
> CONFIG_DEBUG_INFO=y
> # CONFIG_DEBUG_VM is not set
> # CONFIG_DEBUG_VIRTUAL is not set
> # CONFIG_DEBUG_WRITECOUNT is not set
> CONFIG_DEBUG_MEMORY_INIT=y
> CONFIG_DEBUG_LIST=y
> # CONFIG_DEBUG_SG is not set
> # CONFIG_DEBUG_NOTIFIERS is not set
> CONFIG_ARCH_WANT_FRAME_POINTERS=y
> # CONFIG_FRAME_POINTER is not set
> # CONFIG_BOOT_PRINTK_DELAY is not set
> # CONFIG_RCU_TORTURE_TEST is not set
> # CONFIG_RCU_CPU_STALL_DETECTOR is not set
> # CONFIG_KPROBES_SANITY_TEST is not set
> # CONFIG_BACKTRACE_SELF_TEST is not set
> # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
> # CONFIG_LKDTM is not set
> # CONFIG_FAULT_INJECTION is not set
> # CONFIG_LATENCYTOP is not set
> # CONFIG_SYSCTL_SYSCALL_CHECK is not set
> # CONFIG_DEBUG_PAGEALLOC is not set
> CONFIG_USER_STACKTRACE_SUPPORT=y
> CONFIG_NOP_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACER=y
> CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
> CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
> CONFIG_HAVE_DYNAMIC_FTRACE=y
> CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
> CONFIG_HAVE_FTRACE_SYSCALLS=y
> CONFIG_RING_BUFFER=y
> CONFIG_TRACING=y
> CONFIG_TRACING_SUPPORT=y
>
> #
> # Tracers
> #
> # CONFIG_FUNCTION_TRACER is not set
> # CONFIG_IRQSOFF_TRACER is not set
> # CONFIG_SYSPROF_TRACER is not set
> # CONFIG_SCHED_TRACER is not set
> # CONFIG_CONTEXT_SWITCH_TRACER is not set
> # CONFIG_EVENT_TRACER is not set
> # CONFIG_FTRACE_SYSCALLS is not set
> # CONFIG_BOOT_TRACER is not set
> # CONFIG_TRACE_BRANCH_PROFILING is not set
> # CONFIG_POWER_TRACER is not set
> # CONFIG_STACK_TRACER is not set
> # CONFIG_KMEMTRACE is not set
> # CONFIG_WORKQUEUE_TRACER is not set
> CONFIG_BLK_DEV_IO_TRACE=y
> # CONFIG_FTRACE_STARTUP_TEST is not set
> # CONFIG_MMIOTRACE is not set
> # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
> # CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
> # CONFIG_DYNAMIC_DEBUG is not set
> # CONFIG_DMA_API_DEBUG is not set
> # CONFIG_SAMPLES is not set
> CONFIG_HAVE_ARCH_KGDB=y
> # CONFIG_KGDB is not set
> # CONFIG_STRICT_DEVMEM is not set
> CONFIG_X86_VERBOSE_BOOTUP=y
> CONFIG_EARLY_PRINTK=y
> # CONFIG_EARLY_PRINTK_DBGP is not set
> CONFIG_DEBUG_STACKOVERFLOW=y
> # CONFIG_DEBUG_STACK_USAGE is not set
> # CONFIG_DEBUG_PER_CPU_MAPS is not set
> # CONFIG_X86_PTDUMP is not set
> CONFIG_DEBUG_RODATA=y
> CONFIG_DEBUG_RODATA_TEST=y
> # CONFIG_DEBUG_NX_TEST is not set
> # CONFIG_IOMMU_DEBUG is not set
> CONFIG_HAVE_MMIOTRACE_SUPPORT=y
> CONFIG_IO_DELAY_TYPE_0X80=0
> CONFIG_IO_DELAY_TYPE_0XED=1
> CONFIG_IO_DELAY_TYPE_UDELAY=2
> CONFIG_IO_DELAY_TYPE_NONE=3
> CONFIG_IO_DELAY_0X80=y
> # CONFIG_IO_DELAY_0XED is not set
> # CONFIG_IO_DELAY_UDELAY is not set
> # CONFIG_IO_DELAY_NONE is not set
> CONFIG_DEFAULT_IO_DELAY_TYPE=0
> # CONFIG_DEBUG_BOOT_PARAMS is not set
> # CONFIG_CPA_DEBUG is not set
> # CONFIG_OPTIMIZE_INLINING is not set
>
> #
> # Security options
> #
> CONFIG_KEYS=y
> CONFIG_KEYS_DEBUG_PROC_KEYS=y
> CONFIG_SECURITY=y
> CONFIG_SECURITYFS=y
> CONFIG_SECURITY_NETWORK=y
> CONFIG_SECURITY_NETWORK_XFRM=y
> # CONFIG_SECURITY_PATH is not set
> # CONFIG_SECURITY_FILE_CAPABILITIES is not set
> # CONFIG_SECURITY_ROOTPLUG is not set
> CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
> CONFIG_SECURITY_SELINUX=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM=y
> CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
> CONFIG_SECURITY_SELINUX_DISABLE=y
> CONFIG_SECURITY_SELINUX_DEVELOP=y
> CONFIG_SECURITY_SELINUX_AVC_STATS=y
> CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
> # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
> # CONFIG_SECURITY_SMACK is not set
> # CONFIG_SECURITY_TOMOYO is not set
> # CONFIG_IMA is not set
> CONFIG_XOR_BLOCKS=m
> CONFIG_ASYNC_CORE=m
> CONFIG_ASYNC_MEMCPY=m
> CONFIG_ASYNC_XOR=m
> CONFIG_CRYPTO=y
>
> #
> # Crypto core or helper
> #
> # CONFIG_CRYPTO_FIPS is not set
> CONFIG_CRYPTO_ALGAPI=y
> CONFIG_CRYPTO_ALGAPI2=y
> CONFIG_CRYPTO_AEAD=m
> CONFIG_CRYPTO_AEAD2=y
> CONFIG_CRYPTO_BLKCIPHER=m
> CONFIG_CRYPTO_BLKCIPHER2=y
> CONFIG_CRYPTO_HASH=y
> CONFIG_CRYPTO_HASH2=y
> CONFIG_CRYPTO_RNG=m
> CONFIG_CRYPTO_RNG2=y
> CONFIG_CRYPTO_PCOMP=y
> CONFIG_CRYPTO_MANAGER=y
> CONFIG_CRYPTO_MANAGER2=y
> # CONFIG_CRYPTO_GF128MUL is not set
> CONFIG_CRYPTO_NULL=m
> CONFIG_CRYPTO_WORKQUEUE=y
> # CONFIG_CRYPTO_CRYPTD is not set
> CONFIG_CRYPTO_AUTHENC=m
> # CONFIG_CRYPTO_TEST is not set
>
> #
> # Authenticated Encryption with Associated Data
> #
> CONFIG_CRYPTO_CCM=m
> # CONFIG_CRYPTO_GCM is not set
> CONFIG_CRYPTO_SEQIV=m
>
> #
> # Block modes
> #
> CONFIG_CRYPTO_CBC=m
> CONFIG_CRYPTO_CTR=m
> # CONFIG_CRYPTO_CTS is not set
> CONFIG_CRYPTO_ECB=m
> # CONFIG_CRYPTO_LRW is not set
> # CONFIG_CRYPTO_PCBC is not set
> # CONFIG_CRYPTO_XTS is not set
>
> #
> # Hash modes
> #
> CONFIG_CRYPTO_HMAC=y
> CONFIG_CRYPTO_XCBC=m
>
> #
> # Digest
> #
> CONFIG_CRYPTO_CRC32C=y
> # CONFIG_CRYPTO_CRC32C_INTEL is not set
> CONFIG_CRYPTO_MD4=m
> CONFIG_CRYPTO_MD5=m
> CONFIG_CRYPTO_MICHAEL_MIC=m
> # CONFIG_CRYPTO_RMD128 is not set
> # CONFIG_CRYPTO_RMD160 is not set
> # CONFIG_CRYPTO_RMD256 is not set
> # CONFIG_CRYPTO_RMD320 is not set
> CONFIG_CRYPTO_SHA1=y
> CONFIG_CRYPTO_SHA256=m
> CONFIG_CRYPTO_SHA512=m
> CONFIG_CRYPTO_TGR192=m
> CONFIG_CRYPTO_WP512=m
>
> #
> # Ciphers
> #
> CONFIG_CRYPTO_AES=m
> CONFIG_CRYPTO_AES_X86_64=m
> # CONFIG_CRYPTO_AES_NI_INTEL is not set
> CONFIG_CRYPTO_ANUBIS=m
> CONFIG_CRYPTO_ARC4=m
> CONFIG_CRYPTO_BLOWFISH=m
> # CONFIG_CRYPTO_CAMELLIA is not set
> CONFIG_CRYPTO_CAST5=m
> CONFIG_CRYPTO_CAST6=m
> CONFIG_CRYPTO_DES=m
> # CONFIG_CRYPTO_FCRYPT is not set
> CONFIG_CRYPTO_KHAZAD=m
> # CONFIG_CRYPTO_SALSA20 is not set
> # CONFIG_CRYPTO_SALSA20_X86_64 is not set
> # CONFIG_CRYPTO_SEED is not set
> CONFIG_CRYPTO_SERPENT=m
> CONFIG_CRYPTO_TEA=m
> CONFIG_CRYPTO_TWOFISH=m
> CONFIG_CRYPTO_TWOFISH_COMMON=m
> # CONFIG_CRYPTO_TWOFISH_X86_64 is not set
>
> #
> # Compression
> #
> CONFIG_CRYPTO_DEFLATE=m
> # CONFIG_CRYPTO_ZLIB is not set
> # CONFIG_CRYPTO_LZO is not set
>
> #
> # Random Number Generation
> #
> # CONFIG_CRYPTO_ANSI_CPRNG is not set
> CONFIG_CRYPTO_HW=y
> # CONFIG_CRYPTO_DEV_HIFN_795X is not set
> CONFIG_HAVE_KVM=y
> CONFIG_HAVE_KVM_IRQCHIP=y
> CONFIG_VIRTUALIZATION=y
> # CONFIG_KVM is not set
> # CONFIG_VIRTIO_PCI is not set
> # CONFIG_VIRTIO_BALLOON is not set
> CONFIG_BINARY_PRINTF=y
>
> #
> # Library routines
> #
> CONFIG_BITREVERSE=y
> CONFIG_GENERIC_FIND_FIRST_BIT=y
> CONFIG_GENERIC_FIND_NEXT_BIT=y
> CONFIG_GENERIC_FIND_LAST_BIT=y
> CONFIG_CRC_CCITT=m
> CONFIG_CRC16=m
> # CONFIG_CRC_T10DIF is not set
> CONFIG_CRC_ITU_T=m
> CONFIG_CRC32=y
> # CONFIG_CRC7 is not set
> CONFIG_LIBCRC32C=y
> CONFIG_ZLIB_INFLATE=y
> CONFIG_ZLIB_DEFLATE=m
> CONFIG_DECOMPRESS_GZIP=y
> CONFIG_DECOMPRESS_BZIP2=y
> CONFIG_DECOMPRESS_LZMA=y
> CONFIG_GENERIC_ALLOCATOR=y
> CONFIG_REED_SOLOMON=m
> CONFIG_REED_SOLOMON_DEC16=y
> CONFIG_TEXTSEARCH=y
> CONFIG_TEXTSEARCH_KMP=m
> CONFIG_TEXTSEARCH_BM=m
> CONFIG_TEXTSEARCH_FSM=m
> CONFIG_HAS_IOMEM=y
> CONFIG_HAS_IOPORT=y
> CONFIG_HAS_DMA=y
> CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 2:56 >10% performance degradation since 2.6.18 Matthew Wilcox
2009-07-03 17:04 ` Paul E. McKenney
@ 2009-07-03 18:19 ` Andi Kleen
2009-07-03 18:54 ` Jens Axboe
2009-07-06 21:16 ` Ma, Chinang
1 sibling, 2 replies; 33+ messages in thread
From: Andi Kleen @ 2009-07-03 18:19 UTC (permalink / raw)
To: Matthew Wilcox
Cc: linux-kernel, Styner, Douglas W, Chinang Ma, Prickett, Terry O,
Matthew Wilcox, Eric.Moore, DL-MPTFusionLinux
Matthew Wilcox <matthew@wil.cx> writes:
>
> ======oprofile CPU_CLK_UNHALTED for top 30 functions
> Cycles% 2.6.18-92.el5-op Cycles% 2.6.30
> 70.1409 <database> 67.0207 <database>
> 1.3556 mpt_interrupt 1.7029 mpt_interrupt
It's strange that mpt_interrupt is that more costly in 2.6.30
than in 2.6.18. I diffed 2.6.30's drivers/message/fusion/mptbase.c
to a rhel 5.3s and they seem to be about the same.
So why does it cost 0.5% more in 2.6.30?
[adding MPT maintainers]
> 1.1622 __blockdev_direct_IO 1.1443 kmem_cache_alloc
It would be interesting to find out why kmem_cache_alloc
is that more expensive. Either it is called more or the allocator
is slower. Any chance of a callgraph profile run so we
can see the callers?
(you would need to rebuild the kernel with frame pointers)
An interesting would be to simply count them on both kernels, e.g. with a
simple systemtap script (see script at end of mail)
> 0.8246 kmem_cache_free 0.8801 kmem_cache_free
> 0.7108 schedule 0.7774 __blockdev_direct_IO
> 0.6733 scsi_request_fn 0.7031 scsi_request_fn
> 0.6114 kmem_cache_alloc 0.5317 __schedule
> 0.4207 follow_hugetlb_page 0.3922 task_rq_lock
> 0.4062 list_del 0.3629 sd_prep_fn
> 0.3400 __switch_to 0.3504 list_del
A callgraph for the list_del/list_dels would be interesting.
Presumably that's cache misses, maybe we can do something
here with some strategic prefetches or more batching.
> 0.3339 generic_make_request 0.3382 __sigsetjmp
__sigsetjmp is in glibc, isn't it?
> 0.3204 memmove 0.3270 __switch_to
> 0.3088 __sigsetjmp 0.3257 generic_make_request
> 0.2848 get_request 0.3116 kfree
> 0.2804 lock_timer_base 0.2895 memmove
memmove? Is that glibc or the kernel? (it would be good if that
was marked in the listing)
Back when I wrote the x86-64 string functions I didn't consider memmove
too performance critical. So the x86-64 kernel memmove is actually
not very optimized, especially the backwards case is very dumb
and copies byte by byte.
If it's that there might be some low hanging fruit here,
on the other hand it's not a lot of CPU time. The systemtap
script at the end measures this also.
A callgraph for it would be useful if it's kernel.
> 0.2572 __end_that_request_first 0.2402 aio_complete
> 0.2567 fget_light 0.2382 mptscsih_qcmd
> 0.2531 submit_page_section 0.2342 fget
> 0.2428 mempool_alloc 0.2277 gup_huge_pmd
> 0.2428 __generic_file_aio_read 0.2264 submit_page_section
> 0.2368 touch_atime 0.2204 touch_atime
Did you not run with noatime? If it runs with noatime and touch_atime
still takes that many cycles something must be wrong.
Ah it might be the lock in mnt_want_write(). How about the
appended dumb (untested) patch to first check for all the noatime
cases before taking the lock? Even without noatime, but standard
relatime that will hopefully eliminate the locking cost
in most cases.
> 0.2270 __aio_get_req 0.2165 __list_add
> 0.2223 mptscsih_qcmd 0.2063 scsi_dispatch_cmd
> 0.2198 init_request_from_bio 0.2040 lock_timer_base
> 0.2191 fget 0.2036 irq_entries_start
> 0.2141 device_not_available 0.2036 plist_del
That plist_del is new. calltrace?
> 0.2125 try_to_wake_up 0.2004 elv_queue_empty
> 0.2065 mptscsih_io_done 0.2004 get_user_pages_fast
> 0.2059 math_state_restore 0.1997 copy_user_generic_string
> 0.2035 __errno_location 0.1925 kref_get
> 0.2022 find_vma 0.1905 scsi_finish_command
> 0.1967 _setjmp 0.1888 aio_rw_vect_retry
> 0.1966 kref_get 0.1882 __errno_location
That's not kernel, but it's weird that __errno_location is that
costly. AFAIK it should be a simple thread local data lookup
> 0.1952 memset 0.1849 scsi_device_unbusy
> 0.1924 __list_add 0.1846 pick_next_highest_task_rt
> 0.1917 copy_user_generic 0.1826 memset_c
> 0.1907 acpi_os_read_port 0.1819 _setjmp
> 0.1842 elv_queue_empty 0.1816 ipc_lock
So it looks like ipc_lock needs so more scalability work.
> 0.1809 scsi_dispatch_cmd 0.1809 mod_timer
> 0.1808 sd_init_command 0.1800 noop_queue_empty
> 0.1789 swiotlb_unmap_sg 0.1796 scsi_softirq_done
> 0.1766 rw_verify_area 0.1757 scsi_run_queue
> -----------------------------------
---
Systemtap script to measure some interesting metrics. Run
with stap script.stp and then ctrl-c to get data out.
---
global kmem_cache_alloc
global kmem_cache_free
probe kernel.function("kmem_cache_alloc") {
kmem_cache_alloc++
}
probe kernel.function("kmem_cache_free") {
kmem_cache_free++
}
global memmove_total, memmove_backwards
probe kernel.function("memmove") {
memmove_total++
if (ulong_arg(1) < ulong_arg(2)) {
memmove_backwards++
}
}
probe end {
printf("%u kmem_cache_allocs\n", kmem_cache_alloc)
printf("%u kmem_cache_frees\n", kmem_cache_free)
printf("%u memmoves, %u backwards\n", memmove_total, memmove_backwards);
}
---
Only do mnt_want_write after all other options to avoid atime update are exhausted
mnt_want_write takes a lock and can be fairly expensive. So do it as late
as possible.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
---
fs/inode.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
Index: linux-2.6.30-ak/fs/inode.c
===================================================================
--- linux-2.6.30-ak.orig/fs/inode.c
+++ linux-2.6.30-ak/fs/inode.c
@@ -1361,31 +1361,31 @@ void touch_atime(struct vfsmount *mnt, s
struct inode *inode = dentry->d_inode;
struct timespec now;
- if (mnt_want_write(mnt))
- return;
if (inode->i_flags & S_NOATIME)
- goto out;
+ return;
if (IS_NOATIME(inode))
- goto out;
+ return;
if ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))
- goto out;
+ return;
if (mnt->mnt_flags & MNT_NOATIME)
- goto out;
+ return;
if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))
- goto out;
+ return;
now = current_fs_time(inode->i_sb);
if (!relatime_need_update(mnt, inode, now))
- goto out;
+ return;
if (timespec_equal(&inode->i_atime, &now))
- goto out;
+ return;
+
+ if (mnt_want_write(mnt))
+ return;
inode->i_atime = now;
mark_inode_dirty_sync(inode);
-out:
mnt_drop_write(mnt);
}
EXPORT_SYMBOL(touch_atime);
--
ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: >10% performance degradation since 2.6.18
2009-07-03 18:19 ` Andi Kleen
@ 2009-07-03 18:54 ` Jens Axboe
2009-07-03 19:13 ` Matthew Wilcox
2009-07-06 21:16 ` Ma, Chinang
1 sibling, 1 reply; 33+ messages in thread
From: Jens Axboe @ 2009-07-03 18:54 UTC (permalink / raw)
To: Andi Kleen
Cc: Matthew Wilcox, linux-kernel, Styner, Douglas W, Chinang Ma,
Prickett, Terry O, Matthew Wilcox, Eric.Moore, DL-MPTFusionLinux
On Fri, Jul 03 2009, Andi Kleen wrote:
>
> Matthew Wilcox <matthew@wil.cx> writes:
> >
> > ======oprofile CPU_CLK_UNHALTED for top 30 functions
> > Cycles% 2.6.18-92.el5-op Cycles% 2.6.30
> > 70.1409 <database> 67.0207 <database>
> > 1.3556 mpt_interrupt 1.7029 mpt_interrupt
>
> It's strange that mpt_interrupt is that more costly in 2.6.30
> than in 2.6.18. I diffed 2.6.30's drivers/message/fusion/mptbase.c
> to a rhel 5.3s and they seem to be about the same.
>
> So why does it cost 0.5% more in 2.6.30?
>
> [adding MPT maintainers]
Look at the irqs/sec rate, it's higher by about the same percentage. So
it's likely not a more costly irq handler, it's likely just called that
much more. It could be IO pattern, causing more commands to be issued
(which leads to more interrupts, etc).
> > 1.1622 __blockdev_direct_IO 1.1443 kmem_cache_alloc
>
> It would be interesting to find out why kmem_cache_alloc
> is that more expensive. Either it is called more or the allocator
> is slower. Any chance of a callgraph profile run so we
> can see the callers?
Could be more IO as well, that hits the allocate often.
I agree with some callgraph data, that would at least eliminate the
guessing here. And some detailed IO statistics, amount of data
transferred as well as iostat info to see if the pattern is
significantly worse.
--
Jens Axboe
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 18:54 ` Jens Axboe
@ 2009-07-03 19:13 ` Matthew Wilcox
2009-07-03 19:22 ` Jens Axboe
0 siblings, 1 reply; 33+ messages in thread
From: Matthew Wilcox @ 2009-07-03 19:13 UTC (permalink / raw)
To: Jens Axboe
Cc: Andi Kleen, linux-kernel, Styner, Douglas W, Chinang Ma,
Prickett, Terry O, Matthew Wilcox, Eric.Moore, DL-MPTFusionLinux
On Fri, Jul 03, 2009 at 08:54:14PM +0200, Jens Axboe wrote:
> On Fri, Jul 03 2009, Andi Kleen wrote:
> >
> > Matthew Wilcox <matthew@wil.cx> writes:
> > >
> > > ======oprofile CPU_CLK_UNHALTED for top 30 functions
> > > Cycles% 2.6.18-92.el5-op Cycles% 2.6.30
> > > 70.1409 <database> 67.0207 <database>
> > > 1.3556 mpt_interrupt 1.7029 mpt_interrupt
> >
> > It's strange that mpt_interrupt is that more costly in 2.6.30
> > than in 2.6.18. I diffed 2.6.30's drivers/message/fusion/mptbase.c
> > to a rhel 5.3s and they seem to be about the same.
> >
> > So why does it cost 0.5% more in 2.6.30?
> >
> > [adding MPT maintainers]
>
> Look at the irqs/sec rate, it's higher by about the same percentage. So
> it's likely not a more costly irq handler, it's likely just called that
> much more. It could be IO pattern, causing more commands to be issued
> (which leads to more interrupts, etc).
Yes, but the irqs/sec increase doesn't appear to be due to MPT interrupts.
In the /proc/interrupt summaries, RH5 did 388666895 IOC interrupts and
2.6.30 did 378419042. As a percentage of interrupts, the IOC interrupts
were 59.4% with RH and 51.8% with 2.6.30.
This isn't quite conclusive since the collection of /proc/interrupts is
over the entire life of the system, not during the measurement period.
But I do find it persuasive.
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 19:13 ` Matthew Wilcox
@ 2009-07-03 19:22 ` Jens Axboe
2009-07-03 19:45 ` Matthew Wilcox
0 siblings, 1 reply; 33+ messages in thread
From: Jens Axboe @ 2009-07-03 19:22 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Andi Kleen, linux-kernel, Styner, Douglas W, Chinang Ma,
Prickett, Terry O, Matthew Wilcox, Eric.Moore, DL-MPTFusionLinux
On Fri, Jul 03 2009, Matthew Wilcox wrote:
> On Fri, Jul 03, 2009 at 08:54:14PM +0200, Jens Axboe wrote:
> > On Fri, Jul 03 2009, Andi Kleen wrote:
> > >
> > > Matthew Wilcox <matthew@wil.cx> writes:
> > > >
> > > > ======oprofile CPU_CLK_UNHALTED for top 30 functions
> > > > Cycles% 2.6.18-92.el5-op Cycles% 2.6.30
> > > > 70.1409 <database> 67.0207 <database>
> > > > 1.3556 mpt_interrupt 1.7029 mpt_interrupt
> > >
> > > It's strange that mpt_interrupt is that more costly in 2.6.30
> > > than in 2.6.18. I diffed 2.6.30's drivers/message/fusion/mptbase.c
> > > to a rhel 5.3s and they seem to be about the same.
> > >
> > > So why does it cost 0.5% more in 2.6.30?
> > >
> > > [adding MPT maintainers]
> >
> > Look at the irqs/sec rate, it's higher by about the same percentage. So
> > it's likely not a more costly irq handler, it's likely just called that
> > much more. It could be IO pattern, causing more commands to be issued
> > (which leads to more interrupts, etc).
>
> Yes, but the irqs/sec increase doesn't appear to be due to MPT interrupts.
> In the /proc/interrupt summaries, RH5 did 388666895 IOC interrupts and
> 2.6.30 did 378419042. As a percentage of interrupts, the IOC interrupts
> were 59.4% with RH and 51.8% with 2.6.30.
OK. So where are the extra irqs from?
> This isn't quite conclusive since the collection of /proc/interrupts is
> over the entire life of the system, not during the measurement period.
> But I do find it persuasive.
Since the total is so high, it's probably good enough and sampling only
during the measurement likely wouldn't change that picture a lot.
--
Jens Axboe
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 19:22 ` Jens Axboe
@ 2009-07-03 19:45 ` Matthew Wilcox
2009-07-03 19:54 ` Andi Kleen
0 siblings, 1 reply; 33+ messages in thread
From: Matthew Wilcox @ 2009-07-03 19:45 UTC (permalink / raw)
To: Jens Axboe
Cc: Andi Kleen, linux-kernel, Styner, Douglas W, Chinang Ma,
Prickett, Terry O, Matthew Wilcox, Eric.Moore, DL-MPTFusionLinux
On Fri, Jul 03, 2009 at 09:22:35PM +0200, Jens Axboe wrote:
> On Fri, Jul 03 2009, Matthew Wilcox wrote:
> > Yes, but the irqs/sec increase doesn't appear to be due to MPT interrupts.
> > In the /proc/interrupt summaries, RH5 did 388666895 IOC interrupts and
> > 2.6.30 did 378419042. As a percentage of interrupts, the IOC interrupts
> > were 59.4% with RH and 51.8% with 2.6.30.
>
> OK. So where are the extra irqs from?
Let's see:
Source 2.6.18 2.6.30 Delta
qla 0.8% 0.8% 0
eth 20% 27.6% +7.6%
ioc 59.4% 51.8% -7.6%
NMI 7.6% 7.9% +0.3%
LOC 12.2% 10% -2.2%
RES - 1.8% +1.8%
I wouldn't be surprised to find out that 2.6.18 accounted rescheduling
interrupts as 'LOC'. So the difference in interrupts is all about
the ethernet card. I believe these systems have an igb card.
The big difference between 2.6.18 and 2.6.30 is that the cards now have
eight interrupts in use each, instead of one each (four for rx queues
and four for tx queues). Distressingly, these interrupts are all affine
to the same CPUs (eth1's eight interrupts are all on CPU 9 and eth0's
interrupts are all on CPU 1). That would seem to be a fruitful avenue of
investigation -- whether limiting the cards to a single RX/TX interrupt
would be advantageous, or whether spreading the eight interrupts out
over the CPUs would be advantageous.
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 19:45 ` Matthew Wilcox
@ 2009-07-03 19:54 ` Andi Kleen
2009-07-03 20:04 ` Arjan van de Ven
0 siblings, 1 reply; 33+ messages in thread
From: Andi Kleen @ 2009-07-03 19:54 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Jens Axboe, Andi Kleen, linux-kernel, Styner, Douglas W,
Chinang Ma, Prickett, Terry O, Matthew Wilcox, Eric.Moore,
DL-MPTFusionLinux
> That would seem to be a fruitful avenue of
> investigation -- whether limiting the cards to a single RX/TX interrupt
> would be advantageous, or whether spreading the eight interrupts out
> over the CPUs would be advantageous.
The kernel should really do the per cpu binding of MSIs by default.
-Andi
--
ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 19:54 ` Andi Kleen
@ 2009-07-03 20:04 ` Arjan van de Ven
2009-07-03 23:35 ` Andi Kleen
0 siblings, 1 reply; 33+ messages in thread
From: Arjan van de Ven @ 2009-07-03 20:04 UTC (permalink / raw)
To: Andi Kleen
Cc: Matthew Wilcox, Jens Axboe, Andi Kleen, linux-kernel,
Styner, Douglas W, Chinang Ma, Prickett, Terry O, Matthew Wilcox,
Eric.Moore, DL-MPTFusionLinux
On Fri, 3 Jul 2009 21:54:58 +0200
Andi Kleen <andi@firstfloor.org> wrote:
> > That would seem to be a fruitful avenue of
> > investigation -- whether limiting the cards to a single RX/TX
> > interrupt would be advantageous, or whether spreading the eight
> > interrupts out over the CPUs would be advantageous.
>
> The kernel should really do the per cpu binding of MSIs by default.
... so that you can't do power management on a per socket basis?
hardly a good idea.
just need to use a new enough irqbalance and it will spread out the
interrupts unless your load is low enough to go into low power mode.
--
Arjan van de Ven Intel Open Source Technology Centre
For development, discussion and tips for power savings,
visit http://www.lesswatts.org
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 20:04 ` Arjan van de Ven
@ 2009-07-03 23:35 ` Andi Kleen
2009-07-04 6:04 ` Arjan van de Ven
0 siblings, 1 reply; 33+ messages in thread
From: Andi Kleen @ 2009-07-03 23:35 UTC (permalink / raw)
To: Arjan van de Ven
Cc: Andi Kleen, Matthew Wilcox, Jens Axboe, linux-kernel,
Styner, Douglas W, Chinang Ma, Prickett, Terry O, Matthew Wilcox,
Eric.Moore, DL-MPTFusionLinux
> ... so that you can't do power management on a per socket basis?
> hardly a good idea.
Interrupts should only happen when the socket did spent time submitting
the work for them. Typically on drivers I'm familiar with the return
MSI is tied to the CPU that did submit the work item
> just need to use a new enough irqbalance and it will spread out the
> interrupts unless your load is low enough to go into low power mode.
When that load is low then likely you won't get many interrupts
anyways.
-Andi
--
ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-03 23:35 ` Andi Kleen
@ 2009-07-04 6:04 ` Arjan van de Ven
2009-07-04 8:44 ` Andi Kleen
0 siblings, 1 reply; 33+ messages in thread
From: Arjan van de Ven @ 2009-07-04 6:04 UTC (permalink / raw)
To: Andi Kleen
Cc: Andi Kleen, Matthew Wilcox, Jens Axboe, linux-kernel,
Styner, Douglas W, Chinang Ma, Prickett, Terry O, Matthew Wilcox,
Eric.Moore, DL-MPTFusionLinux
On Sat, 4 Jul 2009 01:35:05 +0200
Andi Kleen <andi@firstfloor.org> wrote:
> > ... so that you can't do power management on a per socket basis?
> > hardly a good idea.
>
> Interrupts should only happen when the socket did spent time
> submitting the work for them. Typically on drivers I'm familiar with
> the return MSI is tied to the CPU that did submit the work item
for networking, especially for incoming data such as new connections,
that isn't the case.. that's more or less randomly (well hash based)
distributed.
--
Arjan van de Ven Intel Open Source Technology Centre
For development, discussion and tips for power savings,
visit http://www.lesswatts.org
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-04 6:04 ` Arjan van de Ven
@ 2009-07-04 8:44 ` Andi Kleen
2009-07-04 9:19 ` Jeff Garzik
0 siblings, 1 reply; 33+ messages in thread
From: Andi Kleen @ 2009-07-04 8:44 UTC (permalink / raw)
To: Arjan van de Ven
Cc: Andi Kleen, Matthew Wilcox, Jens Axboe, linux-kernel,
Styner, Douglas W, Chinang Ma, Prickett, Terry O, Matthew Wilcox,
Eric.Moore, DL-MPTFusionLinux
> for networking, especially for incoming data such as new connections,
> that isn't the case.. that's more or less randomly (well hash based)
> distributed.
Ok. Still binding them all to a single CPU all is quite dumb. It
makes MSI-X quite useless and probably even harmful.
We don't default to socket power saving for normal scheduling either,
but only when you specify a special knob. I don't see why interrupts
should be different.
-Andi
--
ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-04 8:44 ` Andi Kleen
@ 2009-07-04 9:19 ` Jeff Garzik
2009-07-05 4:01 ` Herbert Xu
0 siblings, 1 reply; 33+ messages in thread
From: Jeff Garzik @ 2009-07-04 9:19 UTC (permalink / raw)
To: Andi Kleen
Cc: Arjan van de Ven, Matthew Wilcox, Jens Axboe, linux-kernel,
Styner, Douglas W, Chinang Ma, Prickett, Terry O, Matthew Wilcox,
Eric.Moore, DL-MPTFusionLinux, NetDev
Andi Kleen wrote:
>> for networking, especially for incoming data such as new connections,
>> that isn't the case.. that's more or less randomly (well hash based)
>> distributed.
>
> Ok. Still binding them all to a single CPU all is quite dumb. It
> makes MSI-X quite useless and probably even harmful.
>
> We don't default to socket power saving for normal scheduling either,
> but only when you specify a special knob. I don't see why interrupts
> should be different.
In the pre-MSI-X days, you'd have cachelines bouncing all over the place
if you distributed networking interrupts across CPUs, particularly given
that NAPI would run some things on a single CPU anyway.
Today, machines are faster, we have multiple interrupts per device, and
we have multiple RX/TX queues. I would be interested to see hard
numbers (as opposed to guesses) about various new ways to distributed
interrupts across CPUs.
What's the best setup for power usage?
What's the best setup for performance?
Are they the same?
Is it most optimal to have the interrupt for socket $X occur on the same
CPU as where the app is running?
If yes, how to best handle when the scheduler moves app to another CPU?
Should we reprogram the NIC hardware flow steering mechanism at that point?
Interesting questions, and I hope we'd see some hard number comparisons
before solutions start flowing into the kernel.
Jeff
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-04 9:19 ` Jeff Garzik
@ 2009-07-05 4:01 ` Herbert Xu
2009-07-05 13:09 ` Matthew Wilcox
` (2 more replies)
0 siblings, 3 replies; 33+ messages in thread
From: Herbert Xu @ 2009-07-05 4:01 UTC (permalink / raw)
To: Jeff Garzik
Cc: andi, arjan, matthew, jens.axboe, linux-kernel, douglas.w.styner,
chinang.ma, terry.o.prickett, matthew.r.wilcox, Eric.Moore,
DL-MPTFusionLinux, netdev
Jeff Garzik <jeff@garzik.org> wrote:
>
> What's the best setup for power usage?
> What's the best setup for performance?
> Are they the same?
Yes.
> Is it most optimal to have the interrupt for socket $X occur on the same
> CPU as where the app is running?
Yes.
> If yes, how to best handle when the scheduler moves app to another CPU?
> Should we reprogram the NIC hardware flow steering mechanism at that point?
Not really. For now the best thing to do is to pin everything
down and not move at all, because we can't afford to move.
The only way for moving to work is if we had the ability to get
the sockets to follow the processes. That means, we must have
one RX queue per socket.
Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: >10% performance degradation since 2.6.18
2009-07-05 4:01 ` Herbert Xu
@ 2009-07-05 13:09 ` Matthew Wilcox
2009-07-05 16:11 ` Herbert Xu
2009-07-06 8:38 ` Andi Kleen
2009-07-05 20:44 ` Jeff Garzik
2009-07-06 17:00 ` Rick Jones
2 siblings, 2 replies; 33+ messages in thread
From: Matthew Wilcox @ 2009-07-05 13:09 UTC (permalink / raw)
To: Herbert Xu
Cc: Jeff Garzik, andi, arjan, jens.axboe, linux-kernel,
douglas.w.styner, chinang.ma, terry.o.prickett, matthew.r.wilcox,
netdev, Jesse Brandeburg
On Sun, Jul 05, 2009 at 12:01:37PM +0800, Herbert Xu wrote:
> > If yes, how to best handle when the scheduler moves app to another CPU?
> > Should we reprogram the NIC hardware flow steering mechanism at that point?
>
> Not really. For now the best thing to do is to pin everything
> down and not move at all, because we can't afford to move.
>
> The only way for moving to work is if we had the ability to get
> the sockets to follow the processes. That means, we must have
> one RX queue per socket.
Maybe not one RX queue per socket -- sockets belonging to the same
thread could share the same RX queue. I'm fairly ignorant of the way
networking works these days; is it possible to dynamically reassign a
socket between RX queues, so we'd only need one RX queue per CPU?
It seems the 82575 device has four queues per port, and it's a dual-port
card, so that's eight queues in the system. We'd need hundreds of queues
to get one queue per client process. The 82576 has sixteen queues per
port, but that's still not enough (funnily, the driver still limits you
to four per port).
For what it's worth, I believe the current setup pins the client tasks to
a package, but they are allowed to move between cores on that package.
My information may be out of date; hopefully Doug, Chinang or Terry can
clarify how the tasks are currently bound.
I know this test still uses SCHED_RR for the client tasks (using
SCHED_OTHER results in another couple of percentage points off the
overall performance).
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-05 13:09 ` Matthew Wilcox
@ 2009-07-05 16:11 ` Herbert Xu
2009-07-06 8:38 ` Andi Kleen
1 sibling, 0 replies; 33+ messages in thread
From: Herbert Xu @ 2009-07-05 16:11 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Jeff Garzik, andi, arjan, jens.axboe, linux-kernel,
douglas.w.styner, chinang.ma, terry.o.prickett, matthew.r.wilcox,
netdev, Jesse Brandeburg
On Sun, Jul 05, 2009 at 07:09:26AM -0600, Matthew Wilcox wrote:
>
> Maybe not one RX queue per socket -- sockets belonging to the same
> thread could share the same RX queue. I'm fairly ignorant of the way
> networking works these days; is it possible to dynamically reassign a
> socket between RX queues, so we'd only need one RX queue per CPU?
Not reliably. You can tweak the hash in the NIC to redirect
traffic (aka flow director) but ultimately if you've got more
sockets than queues then it's a losing game.
A better strategy for now is to pin everything down and try to
get user-space involved by using threads and distributing the
sockets based on which queue they're associated with.
Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: >10% performance degradation since 2.6.18
2009-07-05 13:09 ` Matthew Wilcox
2009-07-05 16:11 ` Herbert Xu
@ 2009-07-06 8:38 ` Andi Kleen
1 sibling, 0 replies; 33+ messages in thread
From: Andi Kleen @ 2009-07-06 8:38 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Herbert Xu, Jeff Garzik, andi, arjan, jens.axboe, linux-kernel,
douglas.w.styner, chinang.ma, terry.o.prickett, matthew.r.wilcox,
netdev, Jesse Brandeburg
On Sun, Jul 05, 2009 at 07:09:26AM -0600, Matthew Wilcox wrote:
> On Sun, Jul 05, 2009 at 12:01:37PM +0800, Herbert Xu wrote:
> > > If yes, how to best handle when the scheduler moves app to another CPU?
> > > Should we reprogram the NIC hardware flow steering mechanism at that point?
> >
> > Not really. For now the best thing to do is to pin everything
> > down and not move at all, because we can't afford to move.
> >
> > The only way for moving to work is if we had the ability to get
> > the sockets to follow the processes. That means, we must have
> > one RX queue per socket.
>
> Maybe not one RX queue per socket -- sockets belonging to the same
> thread could share the same RX queue. I'm fairly ignorant of the way
> networking works these days; is it possible to dynamically reassign a
> socket between RX queues, so we'd only need one RX queue per CPU?
That is how it is supposed to work (ignoring some special setups
with QoS) in theory.
a You have per CPU RX queues (or if the NIC has less than CPUs, then on a
subset of CPUs)
b The NIC uses a hash function on the stream (= socket) to map an
incoming packet to a specific RX queue.
c The interrupt handler is supposed to be bound on a specific CPU.
d The CPU then does wakeups and the scheduler biases the process/thread
using the sockets towards the CPU that always does the wakeups.
Ideally then the process/thread doing the socket IO should be on
the receiving CPU. It doesn't always work out like this in practice,
but it should.
(c) seems to be the part that is broken right now.
-Andi
--
ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-05 4:01 ` Herbert Xu
2009-07-05 13:09 ` Matthew Wilcox
@ 2009-07-05 20:44 ` Jeff Garzik
2009-07-06 1:19 ` Herbert Xu
2009-07-06 8:45 ` Andi Kleen
2009-07-06 17:00 ` Rick Jones
2 siblings, 2 replies; 33+ messages in thread
From: Jeff Garzik @ 2009-07-05 20:44 UTC (permalink / raw)
To: Herbert Xu
Cc: andi, arjan, matthew, jens.axboe, linux-kernel, douglas.w.styner,
chinang.ma, terry.o.prickett, matthew.r.wilcox, Eric.Moore,
DL-MPTFusionLinux, netdev
Herbert Xu wrote:
> Jeff Garzik <jeff@garzik.org> wrote:
>> What's the best setup for power usage?
>> What's the best setup for performance?
>> Are they the same?
>
> Yes.
Is this a blind guess, or is there real world testing across multiple
setups behind this answer?
Consider a 2-package, quad-core system with 3 userland threads actively
performing network communication, plus periodic, low levels of network
activity from OS utilities (such as nightly 'yum upgrade').
That is essentially an under-utilized 8-CPU system. For such a case, it
seems like a power win to idle or power down a few cores, or maybe even
an entire package.
Efficient power usage means scaling _down_ when activity decreases. A
blind "distribute network activity across all CPUs" policy does not
appear to be responsive to that type of situation.
>> Is it most optimal to have the interrupt for socket $X occur on the same
>> CPU as where the app is running?
>
> Yes.
Same question: blind guess, or do you have numbers?
Consider two competing CPU hogs: a kernel with tons of netfilter tables
and rules, plus an application that uses a lot of CPU.
Can you not reach a threshold where it makes more sense to split kernel
and userland work onto different CPUs?
>> If yes, how to best handle when the scheduler moves app to another CPU?
>> Should we reprogram the NIC hardware flow steering mechanism at that point?
>
> Not really. For now the best thing to do is to pin everything
> down and not move at all, because we can't afford to move.
>
> The only way for moving to work is if we had the ability to get
> the sockets to follow the processes. That means, we must have
> one RX queue per socket.
That seems to presume it is impossible to reprogram the NIC RX queue
selection rules?
If you can add a new 'flow' to a NIC hardware RX queue, surely you can
imagine a remove + add operation for a migrated 'flow'... and thus, at
least on the NIC hardware level, flows can follow processes.
Jeff
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-05 20:44 ` Jeff Garzik
@ 2009-07-06 1:19 ` Herbert Xu
2009-07-06 8:45 ` Andi Kleen
1 sibling, 0 replies; 33+ messages in thread
From: Herbert Xu @ 2009-07-06 1:19 UTC (permalink / raw)
To: Jeff Garzik
Cc: andi, arjan, matthew, jens.axboe, linux-kernel, douglas.w.styner,
chinang.ma, terry.o.prickett, matthew.r.wilcox, Eric.Moore,
DL-MPTFusionLinux, netdev
On Sun, Jul 05, 2009 at 04:44:41PM -0400, Jeff Garzik wrote:
>
> Efficient power usage means scaling _down_ when activity decreases. A
> blind "distribute network activity across all CPUs" policy does not
> appear to be responsive to that type of situation.
I didn't suggest distributing network activity across all CPUs.
It should be distributed across all active CPUs.
> Consider two competing CPU hogs: a kernel with tons of netfilter tables
> and rules, plus an application that uses a lot of CPU.
>
> Can you not reach a threshold where it makes more sense to split kernel
> and userland work onto different CPUs?
In that case the best split would be split the application into
different threads which can then move onto different CPUs. Doing
what you said above will probably work assuming the CPUs share
cache, otherwise it will suck.
> That seems to presume it is impossible to reprogram the NIC RX queue
> selection rules?
>
> If you can add a new 'flow' to a NIC hardware RX queue, surely you can
> imagine a remove + add operation for a migrated 'flow'... and thus, at
> least on the NIC hardware level, flows can follow processes.
Right, that would work as long as you can add a rule for each socket
you cared about. Though it's interesting to know whether the number
of rules can keep up with the number of sockets that we usually
encounter on busy servers.
Cheers,
--
Visit Openswan at http://www.openswan.org/
Email: Herbert Xu ~{PmV>HI~} <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: >10% performance degradation since 2.6.18
2009-07-05 20:44 ` Jeff Garzik
2009-07-06 1:19 ` Herbert Xu
@ 2009-07-06 8:45 ` Andi Kleen
1 sibling, 0 replies; 33+ messages in thread
From: Andi Kleen @ 2009-07-06 8:45 UTC (permalink / raw)
To: Jeff Garzik
Cc: Herbert Xu, andi, arjan, matthew, jens.axboe, linux-kernel,
douglas.w.styner, chinang.ma, terry.o.prickett, matthew.r.wilcox,
Eric.Moore, DL-MPTFusionLinux, netdev
> That seems to presume it is impossible to reprogram the NIC RX queue
> selection rules?
>
> If you can add a new 'flow' to a NIC hardware RX queue, surely you can
> imagine a remove + add operation for a migrated 'flow'... and thus, at
> least on the NIC hardware level, flows can follow processes.
The standard on modern NIC hardware is stateless hashing: as in you
don't program in flows, but the hardware just uses a fixed hash
to map the header to a rx queue. You can't really significantly influence
the hash on a per flow basis there (in theory you could chose
specific local port numbers, but you can't do that for the remote
ports or for well known sockets)
There are a few highend NICs that optionally support arbitary flow matching,
but it typically only supports a very limited number of flows
(so you need some fallback anyways) and of course it would
be costly to reprogram the NIC on every socket state change.
-Andi
--
ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-05 4:01 ` Herbert Xu
2009-07-05 13:09 ` Matthew Wilcox
2009-07-05 20:44 ` Jeff Garzik
@ 2009-07-06 17:00 ` Rick Jones
2009-07-06 17:36 ` Ma, Chinang
2 siblings, 1 reply; 33+ messages in thread
From: Rick Jones @ 2009-07-06 17:00 UTC (permalink / raw)
To: Herbert Xu
Cc: Jeff Garzik, andi, arjan, matthew, jens.axboe, linux-kernel,
douglas.w.styner, chinang.ma, terry.o.prickett, matthew.r.wilcox,
Eric.Moore, DL-MPTFusionLinux, netdev
Herbert Xu wrote:
> Jeff Garzik <jeff@garzik.org> wrote:
>
>>What's the best setup for power usage?
>>What's the best setup for performance?
>>Are they the same?
>
>
> Yes.
>
>
>>Is it most optimal to have the interrupt for socket $X occur on the same
>>CPU as where the app is running?
>
>
> Yes.
Well... Yes, if the goal is lowest service demand/latency, but not always if
the goal is to have highest throughput. For example, basic netperf TCP_RR
between a pair of systems with NIC interrupts pinned to CPU0 for my convenience :)
Pin netperf/netserver to CPU0 as well:
sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 0 -c -C
TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
Local /Remote
Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
Send Recv Size Size Time Rate local remote local remote
bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
16384 87380 1 1 10.00 16396.22 0.39 0.55 3.846 5.364
16384 87380
Now pin it to the peer thread in that same core:
sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 8 -c -C
TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
Local /Remote
Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
Send Recv Size Size Time Rate local remote local remote
bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
16384 87380 1 1 10.00 14078.23 0.67 0.87 7.604 9.863
16384 87380
Now pin it to another core in that same processor:
sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 2 -c -C
TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
Local /Remote
Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
Send Recv Size Size Time Rate local remote local remote
bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
16384 87380 1 1 10.00 14649.57 1.76 0.64 19.213 7.036
16384 87380
Certainly seems to support "run on the same core as interrupts." Now though lets
look at bulk throughput:
sbs133b15:~ # netperf -H sbs133b16 -T 0 -c -C
TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to sbs133b16.west
(10.208.1.50) port 0 AF_INET : cpu bind
Recv Send Send Utilization Service Demand
Socket Socket Message Elapsed Send Recv Send Recv
Size Size Size Time Throughput local remote local remote
bytes bytes bytes secs. 10^6bits/s % S % S us/KB us/KB
87380 16384 16384 10.00 9384.11 3.39 2.19 0.474 0.306
In this case, I'm running on Nehalems (two quad-cores with threads enabled) so I
have enough "oomph" to hit link-rate on a classic throughput test so all these
next two will show is the CPU hit and some of the run to run variablity:
sbs133b15:~ # for t in 8 2; do netperf -P 0 -H sbs133b16 -T $t -c -C -B "bind to
core $t"; done
87380 16384 16384 10.00 9383.67 4.23 5.21 0.591 0.728
bind to core 8
87380 16384 16384 10.00 9383.12 3.03 5.35 0.423 0.747
bind to core 2
So apart from the thing on the top of my head what is my point? Let's look at a
less conventional but still important case - bulk small packet throughput.
First, find the limit for a single connection when bound to the interrupt core:
sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 0 -H
sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
16384 87380 1 1 10.00 16336.52 0.69 0.91 6.715 8.944 0
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 61324.84 2.23 2.27 5.825 5.910 4
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 152221.78 2.81 3.49 2.956 3.664 16
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 291247.72 4.86 5.07 2.670 2.788 64
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 292257.59 3.99 5.91 2.183 3.236 128
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 291734.00 5.55 5.32 3.043 2.920 256
added simultaneous trans
16384 87380
Now, when bound to the peer thread:
sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 8 -H
sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
16384 87380 1 1 10.00 14367.40 0.78 1.75 8.652 19.477 0
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 54820.22 2.73 4.78 7.956 13.948 4
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 159305.92 4.61 6.84 4.627 6.874 16
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 260227.55 6.26 8.36 3.851 5.140 64
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 256336.50 6.23 8.00 3.891 4.993 128
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 250543.92 6.24 6.29 3.985 4.014 256
added simultaneous trans
16384 87380
Things still don't look good for running on another CPU, but wait :) Bind to
another core in the same processor:
sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 2 -H
sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
16384 87380 1 1 10.00 14697.98 0.89 1.53 9.689 16.700 0
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 58201.08 2.11 4.21 5.804 11.585 4
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 158999.50 3.87 6.20 3.899 6.240 16
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 379243.72 6.24 9.04 2.634 3.815 64
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 384823.34 6.15 9.50 2.556 3.949 128
added simultaneous trans
16384 87380
16384 87380 1 1 10.00 375001.50 6.07 9.63 2.588 4.109 256
added simultaneous trans
16384 87380
When the CPU does not have enough "oomph" for link-rate 10G, then what we see
above with the aggregate TCP_RR holds true for a plain TCP_STREAM test as well -
getting the second core involved, while indeed increasing CPU util, also
provides the additional cycles required to get higher thoughput. So what is
optimal depends on what one wishes to optimize.
>
>>If yes, how to best handle when the scheduler moves app to another CPU?
>>Should we reprogram the NIC hardware flow steering mechanism at that point?
>
>
> Not really. For now the best thing to do is to pin everything
> down and not move at all, because we can't afford to move.
>
> The only way for moving to work is if we had the ability to get
> the sockets to follow the processes. That means, we must have
> one RX queue per socket.
Well, or assign sockets to per-core RX queues and be able to move them around.
If it weren't for all the smarts in the NICs getting in the way :), we'd
probably do the "lookup where the socket was last accessed and run there" thing
somewhere in the inbound path a la TOPS.
rick jones
>
> Cheers,
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: >10% performance degradation since 2.6.18
2009-07-06 17:00 ` Rick Jones
@ 2009-07-06 17:36 ` Ma, Chinang
2009-07-06 17:42 ` Matthew Wilcox
0 siblings, 1 reply; 33+ messages in thread
From: Ma, Chinang @ 2009-07-06 17:36 UTC (permalink / raw)
To: Rick Jones, Herbert Xu
Cc: Jeff Garzik, andi@firstfloor.org, arjan@infradead.org,
matthew@wil.cx, jens.axboe@oracle.com,
linux-kernel@vger.kernel.org, Styner, Douglas W,
Prickett, Terry O, Wilcox, Matthew R, Eric.Moore@lsi.com,
DL-MPTFusionLinux@lsi.com, netdev@vger.kernel.org
For OLTP workload we are not pushing much network throughput. Lower network latency is more important for OLTP performance. For the original Nehalem 2 sockets OLTP result in this mail thread, we bound the two NIC interrupts to cpu1 and cpu9 (one NIC per sockets). Database processes are divided into two groups and pinned to socket and each processe only received request from the NIC it bound to. This binding scheme gave us >1% performance boost pre-Nehalem date. We also see positive impact on this NHM system.
-Chinang
>-----Original Message-----
>From: Rick Jones [mailto:rick.jones2@hp.com]
>Sent: Monday, July 06, 2009 10:00 AM
>To: Herbert Xu
>Cc: Jeff Garzik; andi@firstfloor.org; arjan@infradead.org; matthew@wil.cx;
>jens.axboe@oracle.com; linux-kernel@vger.kernel.org; Styner, Douglas W; Ma,
>Chinang; Prickett, Terry O; Wilcox, Matthew R; Eric.Moore@lsi.com; DL-
>MPTFusionLinux@lsi.com; netdev@vger.kernel.org
>Subject: Re: >10% performance degradation since 2.6.18
>
>Herbert Xu wrote:
>> Jeff Garzik <jeff@garzik.org> wrote:
>>
>>>What's the best setup for power usage?
>>>What's the best setup for performance?
>>>Are they the same?
>>
>>
>> Yes.
>>
>>
>>>Is it most optimal to have the interrupt for socket $X occur on the same
>>>CPU as where the app is running?
>>
>>
>> Yes.
>
>Well... Yes, if the goal is lowest service demand/latency, but not always
>if
>the goal is to have highest throughput. For example, basic netperf TCP_RR
>between a pair of systems with NIC interrupts pinned to CPU0 for my
>convenience :)
>
>Pin netperf/netserver to CPU0 as well:
>sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 0 -c -C
>TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
>sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
>Local /Remote
>Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
>Send Recv Size Size Time Rate local remote local remote
>bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
>
>16384 87380 1 1 10.00 16396.22 0.39 0.55 3.846 5.364
>16384 87380
>
>Now pin it to the peer thread in that same core:
>
>sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 8 -c -C
>TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
>sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
>Local /Remote
>Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
>Send Recv Size Size Time Rate local remote local remote
>bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
>
>16384 87380 1 1 10.00 14078.23 0.67 0.87 7.604 9.863
>16384 87380
>
>Now pin it to another core in that same processor:
>
>sbs133b15:~ # netperf -H sbs133b16 -t TCP_RR -T 2 -c -C
>TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to
>sbs133b16.west (10.208.1.50) port 0 AF_INET : first burst 0 : cpu bind
>Local /Remote
>Socket Size Request Resp. Elapsed Trans. CPU CPU S.dem S.dem
>Send Recv Size Size Time Rate local remote local remote
>bytes bytes bytes bytes secs. per sec % S % S us/Tr us/Tr
>
>16384 87380 1 1 10.00 14649.57 1.76 0.64 19.213 7.036
>16384 87380
>
>Certainly seems to support "run on the same core as interrupts." Now though
>lets
>look at bulk throughput:
>
>sbs133b15:~ # netperf -H sbs133b16 -T 0 -c -C
>TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to sbs133b16.west
>(10.208.1.50) port 0 AF_INET : cpu bind
>Recv Send Send Utilization Service
>Demand
>Socket Socket Message Elapsed Send Recv Send Recv
>Size Size Size Time Throughput local remote local
>remote
>bytes bytes bytes secs. 10^6bits/s % S % S us/KB
>us/KB
>
> 87380 16384 16384 10.00 9384.11 3.39 2.19 0.474
>0.306
>
>In this case, I'm running on Nehalems (two quad-cores with threads enabled)
>so I
>have enough "oomph" to hit link-rate on a classic throughput test so all
>these
>next two will show is the CPU hit and some of the run to run variablity:
>
>sbs133b15:~ # for t in 8 2; do netperf -P 0 -H sbs133b16 -T $t -c -C -B
>"bind to
>core $t"; done
> 87380 16384 16384 10.00 9383.67 4.23 5.21 0.591
>0.728
>bind to core 8
> 87380 16384 16384 10.00 9383.12 3.03 5.35 0.423
>0.747
>bind to core 2
>
>So apart from the thing on the top of my head what is my point? Let's look
>at a
>less conventional but still important case - bulk small packet throughput.
>First, find the limit for a single connection when bound to the interrupt
>core:
>
>sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 0 -H
>sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
>16384 87380 1 1 10.00 16336.52 0.69 0.91 6.715 8.944
>0
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 61324.84 2.23 2.27 5.825 5.910
>4
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 152221.78 2.81 3.49 2.956 3.664
>16
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 291247.72 4.86 5.07 2.670 2.788
>64
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 292257.59 3.99 5.91 2.183 3.236
>128
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 291734.00 5.55 5.32 3.043 2.920
>256
>added simultaneous trans
>16384 87380
>
>Now, when bound to the peer thread:
>sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 8 -H
>sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
>16384 87380 1 1 10.00 14367.40 0.78 1.75 8.652 19.477
>0
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 54820.22 2.73 4.78 7.956 13.948
>4
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 159305.92 4.61 6.84 4.627 6.874
>16
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 260227.55 6.26 8.36 3.851 5.140
>64
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 256336.50 6.23 8.00 3.891 4.993
>128
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 250543.92 6.24 6.29 3.985 4.014
>256
>added simultaneous trans
>16384 87380
>
>Things still don't look good for running on another CPU, but wait :) Bind
>to
>another core in the same processor:
>
>sbs133b15:~ # for b in 0 4 16 64 128 256; do netperf -P 0 -t TCP_RR -T 2 -H
>sbs133b16 -c -C -B "$b added simultaneous trans" -- -D -b $b; done
>16384 87380 1 1 10.00 14697.98 0.89 1.53 9.689 16.700
>0
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 58201.08 2.11 4.21 5.804 11.585
>4
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 158999.50 3.87 6.20 3.899 6.240
>16
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 379243.72 6.24 9.04 2.634 3.815
>64
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 384823.34 6.15 9.50 2.556 3.949
>128
>added simultaneous trans
>16384 87380
>16384 87380 1 1 10.00 375001.50 6.07 9.63 2.588 4.109
>256
>added simultaneous trans
>16384 87380
>
>When the CPU does not have enough "oomph" for link-rate 10G, then what we
>see
>above with the aggregate TCP_RR holds true for a plain TCP_STREAM test as
>well -
>getting the second core involved, while indeed increasing CPU util, also
>provides the additional cycles required to get higher thoughput. So what
>is
>optimal depends on what one wishes to optimize.
>
>>
>>>If yes, how to best handle when the scheduler moves app to another CPU?
>>>Should we reprogram the NIC hardware flow steering mechanism at that
>point?
>>
>>
>> Not really. For now the best thing to do is to pin everything
>> down and not move at all, because we can't afford to move.
>>
>> The only way for moving to work is if we had the ability to get
>> the sockets to follow the processes. That means, we must have
>> one RX queue per socket.
>
>Well, or assign sockets to per-core RX queues and be able to move them
>around.
>If it weren't for all the smarts in the NICs getting in the way :), we'd
>probably do the "lookup where the socket was last accessed and run there"
>thing
>somewhere in the inbound path a la TOPS.
>
>rick jones
>
>>
>> Cheers,
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-06 17:36 ` Ma, Chinang
@ 2009-07-06 17:42 ` Matthew Wilcox
2009-07-06 17:57 ` Ma, Chinang
0 siblings, 1 reply; 33+ messages in thread
From: Matthew Wilcox @ 2009-07-06 17:42 UTC (permalink / raw)
To: Ma, Chinang
Cc: Rick Jones, Herbert Xu, Jeff Garzik, andi@firstfloor.org,
arjan@infradead.org, jens.axboe@oracle.com,
linux-kernel@vger.kernel.org, Styner, Douglas W,
Prickett, Terry O, Wilcox, Matthew R, netdev@vger.kernel.org,
jesse.brandeburg
On Mon, Jul 06, 2009 at 10:36:11AM -0700, Ma, Chinang wrote:
> For OLTP workload we are not pushing much network throughput. Lower network latency is more important for OLTP performance. For the original Nehalem 2 sockets OLTP result in this mail thread, we bound the two NIC interrupts to cpu1 and cpu9 (one NIC per sockets). Database processes are divided into two groups and pinned to socket and each processe only received request from the NIC it bound to. This binding scheme gave us >1% performance boost pre-Nehalem date. We also see positive impact on this NHM system.
So you've tried spreading the four RX and TX interrupts for each card
out over, say, CPUs 1, 3, 5, 7 for eth1 and then 9, 11, 13, 15 for eth0,
and it produces worse performance than having all four tied to CPUs 1
and 9? Interesting.
Can you try changing IGB_MAX_RX_QUEUES (in drivers/net/igb/igb.h, about
line 60) to 1, and seeing if performance improves that way?
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: >10% performance degradation since 2.6.18
2009-07-06 17:42 ` Matthew Wilcox
@ 2009-07-06 17:57 ` Ma, Chinang
2009-07-06 18:05 ` Matthew Wilcox
0 siblings, 1 reply; 33+ messages in thread
From: Ma, Chinang @ 2009-07-06 17:57 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Rick Jones, Herbert Xu, Jeff Garzik, andi@firstfloor.org,
arjan@infradead.org, jens.axboe@oracle.com,
linux-kernel@vger.kernel.org, Styner, Douglas W,
Prickett, Terry O, Wilcox, Matthew R, netdev@vger.kernel.org,
Brandeburg, Jesse
>-----Original Message-----
>From: Matthew Wilcox [mailto:matthew@wil.cx]
>Sent: Monday, July 06, 2009 10:42 AM
>To: Ma, Chinang
>Cc: Rick Jones; Herbert Xu; Jeff Garzik; andi@firstfloor.org;
>arjan@infradead.org; jens.axboe@oracle.com; linux-kernel@vger.kernel.org;
>Styner, Douglas W; Prickett, Terry O; Wilcox, Matthew R;
>netdev@vger.kernel.org; Brandeburg, Jesse
>Subject: Re: >10% performance degradation since 2.6.18
>
>On Mon, Jul 06, 2009 at 10:36:11AM -0700, Ma, Chinang wrote:
>> For OLTP workload we are not pushing much network throughput. Lower
>network latency is more important for OLTP performance. For the original
>Nehalem 2 sockets OLTP result in this mail thread, we bound the two NIC
>interrupts to cpu1 and cpu9 (one NIC per sockets). Database processes are
>divided into two groups and pinned to socket and each processe only
>received request from the NIC it bound to. This binding scheme gave us >1%
>performance boost pre-Nehalem date. We also see positive impact on this NHM
>system.
>
>So you've tried spreading the four RX and TX interrupts for each card
>out over, say, CPUs 1, 3, 5, 7 for eth1 and then 9, 11, 13, 15 for eth0,
>and it produces worse performance than having all four tied to CPUs 1
>and 9? Interesting.
I was comparing 2 NIC on 2 sockets to 2 NIC on the same socket. I have not tried spreading out the interrupt for a NIC to cpus in the same sockets. Is there good reason for trying this?
>
>Can you try changing IGB_MAX_RX_QUEUES (in drivers/net/igb/igb.h, about
>line 60) to 1, and seeing if performance improves that way?
>
I suppose this should wait until we find out whether spread out NIC interrupt in socket helps or not.
>--
>Matthew Wilcox Intel Open Source Technology Centre
>"Bill, look, we understand that you're interested in selling us this
>operating system, but compare it to ours. We can't possibly take such
>a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-06 17:57 ` Ma, Chinang
@ 2009-07-06 18:05 ` Matthew Wilcox
2009-07-06 18:48 ` Ma, Chinang
0 siblings, 1 reply; 33+ messages in thread
From: Matthew Wilcox @ 2009-07-06 18:05 UTC (permalink / raw)
To: Ma, Chinang
Cc: Rick Jones, Herbert Xu, Jeff Garzik, andi@firstfloor.org,
arjan@infradead.org, jens.axboe@oracle.com,
linux-kernel@vger.kernel.org, Styner, Douglas W,
Prickett, Terry O, Wilcox, Matthew R, netdev@vger.kernel.org,
Brandeburg, Jesse
On Mon, Jul 06, 2009 at 10:57:09AM -0700, Ma, Chinang wrote:
> >-----Original Message-----
> >From: Matthew Wilcox [mailto:matthew@wil.cx]
> >Sent: Monday, July 06, 2009 10:42 AM
> >To: Ma, Chinang
> >Cc: Rick Jones; Herbert Xu; Jeff Garzik; andi@firstfloor.org;
> >arjan@infradead.org; jens.axboe@oracle.com; linux-kernel@vger.kernel.org;
> >Styner, Douglas W; Prickett, Terry O; Wilcox, Matthew R;
> >netdev@vger.kernel.org; Brandeburg, Jesse
> >Subject: Re: >10% performance degradation since 2.6.18
> >
> >On Mon, Jul 06, 2009 at 10:36:11AM -0700, Ma, Chinang wrote:
> >> For OLTP workload we are not pushing much network throughput. Lower
> >network latency is more important for OLTP performance. For the original
> >Nehalem 2 sockets OLTP result in this mail thread, we bound the two NIC
> >interrupts to cpu1 and cpu9 (one NIC per sockets). Database processes are
> >divided into two groups and pinned to socket and each processe only
> >received request from the NIC it bound to. This binding scheme gave us >1%
> >performance boost pre-Nehalem date. We also see positive impact on this NHM
> >system.
> >
> >So you've tried spreading the four RX and TX interrupts for each card
> >out over, say, CPUs 1, 3, 5, 7 for eth1 and then 9, 11, 13, 15 for eth0,
> >and it produces worse performance than having all four tied to CPUs 1
> >and 9? Interesting.
>
> I was comparing 2 NIC on 2 sockets to 2 NIC on the same socket. I have not tried spreading out the interrupt for a NIC to cpus in the same sockets. Is there good reason for trying this?
If spreading the network load from one CPU to two CPUs increases the
performance, spreading the network load from two to eight might get even
better performance.
Are the clients now pinned to the CPU package on which they receive their
network interrupts?
> >Can you try changing IGB_MAX_RX_QUEUES (in drivers/net/igb/igb.h, about
> >line 60) to 1, and seeing if performance improves that way?
>
> I suppose this should wait until we find out whether spread out NIC interrupt in socket helps or not.
Yes, let's try having the driver work the way that LAD designed it
first ;-)
They may not have been optimising for the database client workload,
of course.
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: >10% performance degradation since 2.6.18
2009-07-06 18:05 ` Matthew Wilcox
@ 2009-07-06 18:48 ` Ma, Chinang
2009-07-06 18:53 ` Matthew Wilcox
0 siblings, 1 reply; 33+ messages in thread
From: Ma, Chinang @ 2009-07-06 18:48 UTC (permalink / raw)
To: Matthew Wilcox
Cc: Rick Jones, Herbert Xu, Jeff Garzik, andi@firstfloor.org,
arjan@infradead.org, jens.axboe@oracle.com,
linux-kernel@vger.kernel.org, Styner, Douglas W,
Prickett, Terry O, Wilcox, Matthew R, netdev@vger.kernel.org,
Brandeburg, Jesse
>-----Original Message-----
>From: Matthew Wilcox [mailto:matthew@wil.cx]
>Sent: Monday, July 06, 2009 11:06 AM
>To: Ma, Chinang
>Cc: Rick Jones; Herbert Xu; Jeff Garzik; andi@firstfloor.org;
>arjan@infradead.org; jens.axboe@oracle.com; linux-kernel@vger.kernel.org;
>Styner, Douglas W; Prickett, Terry O; Wilcox, Matthew R;
>netdev@vger.kernel.org; Brandeburg, Jesse
>Subject: Re: >10% performance degradation since 2.6.18
>
>On Mon, Jul 06, 2009 at 10:57:09AM -0700, Ma, Chinang wrote:
>> >-----Original Message-----
>> >From: Matthew Wilcox [mailto:matthew@wil.cx]
>> >Sent: Monday, July 06, 2009 10:42 AM
>> >To: Ma, Chinang
>> >Cc: Rick Jones; Herbert Xu; Jeff Garzik; andi@firstfloor.org;
>> >arjan@infradead.org; jens.axboe@oracle.com; linux-kernel@vger.kernel.org;
>> >Styner, Douglas W; Prickett, Terry O; Wilcox, Matthew R;
>> >netdev@vger.kernel.org; Brandeburg, Jesse
>> >Subject: Re: >10% performance degradation since 2.6.18
>> >
>> >On Mon, Jul 06, 2009 at 10:36:11AM -0700, Ma, Chinang wrote:
>> >> For OLTP workload we are not pushing much network throughput. Lower
>> >network latency is more important for OLTP performance. For the original
>> >Nehalem 2 sockets OLTP result in this mail thread, we bound the two NIC
>> >interrupts to cpu1 and cpu9 (one NIC per sockets). Database processes
>are
>> >divided into two groups and pinned to socket and each processe only
>> >received request from the NIC it bound to. This binding scheme gave us
>>1%
>> >performance boost pre-Nehalem date. We also see positive impact on this
>NHM
>> >system.
>> >
>> >So you've tried spreading the four RX and TX interrupts for each card
>> >out over, say, CPUs 1, 3, 5, 7 for eth1 and then 9, 11, 13, 15 for eth0,
>> >and it produces worse performance than having all four tied to CPUs 1
>> >and 9? Interesting.
>>
>> I was comparing 2 NIC on 2 sockets to 2 NIC on the same socket. I have
>not tried spreading out the interrupt for a NIC to cpus in the same sockets.
>Is there good reason for trying this?
>
>If spreading the network load from one CPU to two CPUs increases the
>performance, spreading the network load from two to eight might get even
>better performance.
>
On the distributing interrupt load subject. Can we do the same thing with the IOC interrupts. We have 4 LSI 3801, The number of i/o interrupt is huge on 4 of the cpus. Is there a way to divide the IOC irq number so we can spread out the i/o interrupt to more cpu?
>Are the clients now pinned to the CPU package on which they receive their
>network interrupts?
Yes. The database processes in server are pinning to the socket on which they received network interrupts.
>
>> >Can you try changing IGB_MAX_RX_QUEUES (in drivers/net/igb/igb.h, about
>> >line 60) to 1, and seeing if performance improves that way?
>>
>> I suppose this should wait until we find out whether spread out NIC
>interrupt in socket helps or not.
>
>Yes, let's try having the driver work the way that LAD designed it
>first ;-)
>
>They may not have been optimising for the database client workload,
>of course.
>
>--
>Matthew Wilcox Intel Open Source Technology Centre
>"Bill, look, we understand that you're interested in selling us this
>operating system, but compare it to ours. We can't possibly take such
>a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-06 18:48 ` Ma, Chinang
@ 2009-07-06 18:53 ` Matthew Wilcox
0 siblings, 0 replies; 33+ messages in thread
From: Matthew Wilcox @ 2009-07-06 18:53 UTC (permalink / raw)
To: Ma, Chinang
Cc: Rick Jones, Herbert Xu, Jeff Garzik, andi@firstfloor.org,
arjan@infradead.org, jens.axboe@oracle.com,
linux-kernel@vger.kernel.org, Styner, Douglas W,
Prickett, Terry O, Wilcox, Matthew R, netdev@vger.kernel.org,
Brandeburg, Jesse
On Mon, Jul 06, 2009 at 11:48:47AM -0700, Ma, Chinang wrote:
> On the distributing interrupt load subject. Can we do the same thing with the IOC interrupts. We have 4 LSI 3801, The number of i/o interrupt is huge on 4 of the cpus. Is there a way to divide the IOC irq number so we can spread out the i/o interrupt to more cpu?
I think the LSI 3801 only has one interrupt per ioc, but they could
perhaps be better spread-out. Right now, they're delivering interrupts
to CPUs 2, 3, 4 and 5. Possibly spreading them out to CPUs 2, 6, 10
and 14 would help. Or maybe it would hurt ...
(nb: the ioc interrupts are similarly tied to CPUs 2, 3, 4 and 5 with
2.6.18, so this isn't a likely cause of/solution to the regression,
it may just be a path to better numbers).
--
Matthew Wilcox Intel Open Source Technology Centre
"Bill, look, we understand that you're interested in selling us this
operating system, but compare it to ours. We can't possibly take such
a retrograde step."
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: >10% performance degradation since 2.6.18
2009-07-03 18:19 ` Andi Kleen
2009-07-03 18:54 ` Jens Axboe
@ 2009-07-06 21:16 ` Ma, Chinang
2009-07-07 8:16 ` Andi Kleen
1 sibling, 1 reply; 33+ messages in thread
From: Ma, Chinang @ 2009-07-06 21:16 UTC (permalink / raw)
To: Andi Kleen, Matthew Wilcox
Cc: linux-kernel@vger.kernel.org, Styner, Douglas W,
Prickett, Terry O, Wilcox, Matthew R, Eric.Moore@lsi.com,
DL-MPTFusionLinux@lsi.com
Trying to answer Andi's questions below
>-----Original Message-----
>From: Andi Kleen [mailto:andi@firstfloor.org]
>Sent: Friday, July 03, 2009 11:19 AM
>To: Matthew Wilcox
>Cc: linux-kernel@vger.kernel.org; Styner, Douglas W; Ma, Chinang; Prickett,
>Terry O; Wilcox, Matthew R; Eric.Moore@lsi.com; DL-MPTFusionLinux@lsi.com
>Subject: Re: >10% performance degradation since 2.6.18
>
>
>Matthew Wilcox <matthew@wil.cx> writes:
>>
>> ======oprofile CPU_CLK_UNHALTED for top 30 functions
>> Cycles% 2.6.18-92.el5-op Cycles% 2.6.30
>> 70.1409 <database> 67.0207 <database>
>> 1.3556 mpt_interrupt 1.7029 mpt_interrupt
>
>It's strange that mpt_interrupt is that more costly in 2.6.30
>than in 2.6.18. I diffed 2.6.30's drivers/message/fusion/mptbase.c
>to a rhel 5.3s and they seem to be about the same.
>
>So why does it cost 0.5% more in 2.6.30?
>
>[adding MPT maintainers]
>
>> 1.1622 __blockdev_direct_IO 1.1443 kmem_cache_alloc
>
>It would be interesting to find out why kmem_cache_alloc
>is that more expensive. Either it is called more or the allocator
>is slower. Any chance of a callgraph profile run so we
>can see the callers?
>
We will try collecting the oprofile callgraph data.
>(you would need to rebuild the kernel with frame pointers)
>
>An interesting would be to simply count them on both kernels, e.g. with a
>simple systemtap script (see script at end of mail)
>
>> 0.8246 kmem_cache_free 0.8801 kmem_cache_free
>> 0.7108 schedule 0.7774 __blockdev_direct_IO
>> 0.6733 scsi_request_fn 0.7031 scsi_request_fn
>> 0.6114 kmem_cache_alloc 0.5317 __schedule
>> 0.4207 follow_hugetlb_page 0.3922 task_rq_lock
>> 0.4062 list_del 0.3629 sd_prep_fn
>> 0.3400 __switch_to 0.3504 list_del
>
>A callgraph for the list_del/list_dels would be interesting.
>Presumably that's cache misses, maybe we can do something
>here with some strategic prefetches or more batching.
>
>> 0.3339 generic_make_request 0.3382 __sigsetjmp
>
>__sigsetjmp is in glibc, isn't it?
Yes, __sigsetjmp from glibc
>
>> 0.3204 memmove 0.3270 __switch_to
>> 0.3088 __sigsetjmp 0.3257 generic_make_request
>> 0.2848 get_request 0.3116 kfree
>> 0.2804 lock_timer_base 0.2895 memmove
>
>memmove? Is that glibc or the kernel? (it would be good if that
>was marked in the listing)
Memmove is from glibc. I will filter out all user space libraries in the future report
>
>Back when I wrote the x86-64 string functions I didn't consider memmove
>too performance critical. So the x86-64 kernel memmove is actually
>not very optimized, especially the backwards case is very dumb
>and copies byte by byte.
>
>If it's that there might be some low hanging fruit here,
>on the other hand it's not a lot of CPU time. The systemtap
>script at the end measures this also.
>
>A callgraph for it would be useful if it's kernel.
>
>> 0.2572 __end_that_request_first 0.2402 aio_complete
>> 0.2567 fget_light 0.2382 mptscsih_qcmd
>> 0.2531 submit_page_section 0.2342 fget
>> 0.2428 mempool_alloc 0.2277 gup_huge_pmd
>> 0.2428 __generic_file_aio_read 0.2264 submit_page_section
>> 0.2368 touch_atime 0.2204 touch_atime
>
>Did you not run with noatime? If it runs with noatime and touch_atime
>still takes that many cycles something must be wrong.
>
Did not try noatime option yet. Will try it next time.
>Ah it might be the lock in mnt_want_write(). How about the
>appended dumb (untested) patch to first check for all the noatime
>cases before taking the lock? Even without noatime, but standard
>relatime that will hopefully eliminate the locking cost
>in most cases.
>
>> 0.2270 __aio_get_req 0.2165 __list_add
>> 0.2223 mptscsih_qcmd 0.2063 scsi_dispatch_cmd
>> 0.2198 init_request_from_bio 0.2040 lock_timer_base
>> 0.2191 fget 0.2036 irq_entries_start
>> 0.2141 device_not_available 0.2036 plist_del
>
>That plist_del is new. calltrace?
Not sure who use this. It is part of vmlinux
>
>> 0.2125 try_to_wake_up 0.2004 elv_queue_empty
>> 0.2065 mptscsih_io_done 0.2004 get_user_pages_fast
>> 0.2059 math_state_restore 0.1997 copy_user_generic_string
>> 0.2035 __errno_location 0.1925 kref_get
>> 0.2022 find_vma 0.1905 scsi_finish_command
>> 0.1967 _setjmp 0.1888 aio_rw_vect_retry
>> 0.1966 kref_get 0.1882 __errno_location
>
>That's not kernel, but it's weird that __errno_location is that
>costly. AFAIK it should be a simple thread local data lookup
>
>> 0.1952 memset 0.1849 scsi_device_unbusy
>> 0.1924 __list_add 0.1846 pick_next_highest_task_rt
>> 0.1917 copy_user_generic 0.1826 memset_c
>> 0.1907 acpi_os_read_port 0.1819 _setjmp
>> 0.1842 elv_queue_empty 0.1816 ipc_lock
>
>So it looks like ipc_lock needs so more scalability work.
>
Ipc_lock is not too high in cycles in this case. We can reduce the semaphore array size to try lower the contention.
>> 0.1809 scsi_dispatch_cmd 0.1809 mod_timer
>> 0.1808 sd_init_command 0.1800 noop_queue_empty
>> 0.1789 swiotlb_unmap_sg 0.1796 scsi_softirq_done
>> 0.1766 rw_verify_area 0.1757 scsi_run_queue
>> -----------------------------------
>
>---
>
>Systemtap script to measure some interesting metrics. Run
>with stap script.stp and then ctrl-c to get data out.
>
>---
Will try collect this data.
>
>global kmem_cache_alloc
>global kmem_cache_free
>
>probe kernel.function("kmem_cache_alloc") {
> kmem_cache_alloc++
>
>}
>
>probe kernel.function("kmem_cache_free") {
> kmem_cache_free++
>}
>
>global memmove_total, memmove_backwards
>
>probe kernel.function("memmove") {
> memmove_total++
> if (ulong_arg(1) < ulong_arg(2)) {
> memmove_backwards++
> }
>}
>
>probe end {
> printf("%u kmem_cache_allocs\n", kmem_cache_alloc)
> printf("%u kmem_cache_frees\n", kmem_cache_free)
> printf("%u memmoves, %u backwards\n", memmove_total,
>memmove_backwards);
>}
>
>
>---
>
>Only do mnt_want_write after all other options to avoid atime update are
>exhausted
>
>mnt_want_write takes a lock and can be fairly expensive. So do it as late
>as possible.
>
>Signed-off-by: Andi Kleen <ak@linux.intel.com>
>
>---
> fs/inode.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
>Index: linux-2.6.30-ak/fs/inode.c
>===================================================================
>--- linux-2.6.30-ak.orig/fs/inode.c
>+++ linux-2.6.30-ak/fs/inode.c
>@@ -1361,31 +1361,31 @@ void touch_atime(struct vfsmount *mnt, s
> struct inode *inode = dentry->d_inode;
> struct timespec now;
>
>- if (mnt_want_write(mnt))
>- return;
> if (inode->i_flags & S_NOATIME)
>- goto out;
>+ return;
> if (IS_NOATIME(inode))
>- goto out;
>+ return;
> if ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))
>- goto out;
>+ return;
>
> if (mnt->mnt_flags & MNT_NOATIME)
>- goto out;
>+ return;
> if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))
>- goto out;
>+ return;
>
> now = current_fs_time(inode->i_sb);
>
> if (!relatime_need_update(mnt, inode, now))
>- goto out;
>+ return;
>
> if (timespec_equal(&inode->i_atime, &now))
>- goto out;
>+ return;
>+
>+ if (mnt_want_write(mnt))
>+ return;
>
> inode->i_atime = now;
> mark_inode_dirty_sync(inode);
>-out:
> mnt_drop_write(mnt);
> }
> EXPORT_SYMBOL(touch_atime);
>
>
>--
>ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread* Re: >10% performance degradation since 2.6.18
2009-07-06 21:16 ` Ma, Chinang
@ 2009-07-07 8:16 ` Andi Kleen
0 siblings, 0 replies; 33+ messages in thread
From: Andi Kleen @ 2009-07-07 8:16 UTC (permalink / raw)
To: Ma, Chinang
Cc: Andi Kleen, Matthew Wilcox, linux-kernel@vger.kernel.org,
Styner, Douglas W, Prickett, Terry O, Wilcox, Matthew R,
Eric.Moore@lsi.com, DL-MPTFusionLinux@lsi.com
On Mon, Jul 06, 2009 at 02:16:38PM -0700, Ma, Chinang wrote:
> >
> >> 0.8246 kmem_cache_free 0.8801 kmem_cache_free
> >> 0.7108 schedule 0.7774 __blockdev_direct_IO
> >> 0.6733 scsi_request_fn 0.7031 scsi_request_fn
> >> 0.6114 kmem_cache_alloc 0.5317 __schedule
> >> 0.4207 follow_hugetlb_page 0.3922 task_rq_lock
> >> 0.4062 list_del 0.3629 sd_prep_fn
> >> 0.3400 __switch_to 0.3504 list_del
> >
> >A callgraph for the list_del/list_dels would be interesting.
> >Presumably that's cache misses, maybe we can do something
> >here with some strategic prefetches or more batching.
> >
> >> 0.3339 generic_make_request 0.3382 __sigsetjmp
> >
> >__sigsetjmp is in glibc, isn't it?
>
> Yes, __sigsetjmp from glibc
Strange that it takes that much CPU time.
>
> >
> >> 0.3204 memmove 0.3270 __switch_to
> >> 0.3088 __sigsetjmp 0.3257 generic_make_request
> >> 0.2848 get_request 0.3116 kfree
> >> 0.2804 lock_timer_base 0.2895 memmove
> >
> >memmove? Is that glibc or the kernel? (it would be good if that
> >was marked in the listing)
>
> Memmove is from glibc. I will filter out all user space libraries in the future report
it would be good to find out why __errno_location is that costly.
in theory it should be only
mov %fs:xxxx,%rax
ret
> >A callgraph for it would be useful if it's kernel.
> >
> >> 0.2572 __end_that_request_first 0.2402 aio_complete
> >> 0.2567 fget_light 0.2382 mptscsih_qcmd
> >> 0.2531 submit_page_section 0.2342 fget
> >> 0.2428 mempool_alloc 0.2277 gup_huge_pmd
> >> 0.2428 __generic_file_aio_read 0.2264 submit_page_section
> >> 0.2368 touch_atime 0.2204 touch_atime
> >
> >Did you not run with noatime? If it runs with noatime and touch_atime
> >still takes that many cycles something must be wrong.
> >
>
> Did not try noatime option yet. Will try it next time.
noatime would only help with the patch from the previous message.
Otherwise it'll still take the lock all the time.
Also 2.6.30 defaults to "relatime" which should be often
equivalent to noatime. But still the patch might help.
>
> Will try collect this data.
It's probably not needed for now; if you can get callgraphs.
The memmove part would have been only interesting if the hot memmove
was in kernel.
-Andi
--
ak@linux.intel.com -- Speaking for myself only.
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
@ 2009-07-05 11:00 Daniel J Blueman
2009-07-06 21:58 ` Chetan.Loke
0 siblings, 1 reply; 33+ messages in thread
From: Daniel J Blueman @ 2009-07-05 11:00 UTC (permalink / raw)
To: Matthew Wilcox, Andi Kleen; +Cc: Linux Kernel, Jens Axboe, Arjan van de Ven
On Jul 3, 9:10 pm, Arjan van de Ven <ar...@infradead.org> wrote:
> On Fri, 3 Jul 2009 21:54:58 +0200
>
> Andi Kleen <a...@firstfloor.org> wrote:
> > > That would seem to be a fruitful avenue of
> > > investigation -- whether limiting the cards to a single RX/TX
> > > interrupt would be advantageous, or whether spreading the eight
> > > interrupts out over the CPUs would be advantageous.
>
> > The kernel should really do the per cpu binding of MSIs by default.
>
> ... so that you can't do power management on a per socket basis?
> hardly a good idea.
>
> just need to use a new enough irqbalance and it will spread out the
> interrupts unless your load is low enough to go into low power mode.
I was finding newer kernels (>~2.6.24) would set the Redirection Hint
bit in the MSI address vector, allowing the processors to deliver the
interrupt to the lowest interrupt priority (eg idle, no powersave)
core (http://www.intel.com/Assets/PDF/manual/253668.pdf pp10-66) and
older irqbalance daemons would periodically naively rewrite the
bitmask of cores, delivering the interrupt to a static one.
Thus, it may be worth checking if disabling any older irqbalance
daemon gives any win.
Perhaps there is value in writing different subsets of cores to the
MSI address vector core bitmask (with the redirection hint enabled)
for different I/O queues on heavy interrupt sources? By default, it's
all cores.
Daniel
--
Daniel J Blueman
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: >10% performance degradation since 2.6.18
2009-07-05 11:00 Daniel J Blueman
@ 2009-07-06 21:58 ` Chetan.Loke
2009-07-07 22:05 ` Daniel J Blueman
0 siblings, 1 reply; 33+ messages in thread
From: Chetan.Loke @ 2009-07-06 21:58 UTC (permalink / raw)
To: daniel.blueman, matthew, andi; +Cc: linux-kernel, jens.axboe, arjan
> -----Original Message-----
> From: linux-kernel-owner@vger.kernel.org
> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of
> Daniel J Blueman
> Sent: Sunday, July 05, 2009 7:01 AM
> To: Matthew Wilcox; Andi Kleen
> Cc: Linux Kernel; Jens Axboe; Arjan van de Ven
> Subject: Re: >10% performance degradation since 2.6.18
>
> On Jul 3, 9:10 pm, Arjan van de Ven <ar...@infradead.org> wrote:
> > On Fri, 3 Jul 2009 21:54:58 +0200
> >
> > Andi Kleen <a...@firstfloor.org> wrote:
> > > > That would seem to be a fruitful avenue of investigation --
> > > > whether limiting the cards to a single RX/TX interrupt would be
> > > > advantageous, or whether spreading the eight interrupts
> out over
> > > > the CPUs would be advantageous.
> >
> > > The kernel should really do the per cpu binding of MSIs
> by default.
> >
> > ... so that you can't do power management on a per socket basis?
> > hardly a good idea.
> >
> > just need to use a new enough irqbalance and it will spread out the
> > interrupts unless your load is low enough to go into low power mode.
>
> I was finding newer kernels (>~2.6.24) would set the
> Redirection Hint bit in the MSI address vector, allowing the
> processors to deliver the interrupt to the lowest interrupt
> priority (eg idle, no powersave) core
> (http://www.intel.com/Assets/PDF/manual/253668.pdf pp10-66)
> and older irqbalance daemons would periodically naively
> rewrite the bitmask of cores, delivering the interrupt to a
> static one.
>
> Thus, it may be worth checking if disabling any older
> irqbalance daemon gives any win.
>
> Perhaps there is value in writing different subsets of cores
> to the MSI address vector core bitmask (with the redirection
> hint enabled) for different I/O queues on heavy interrupt
> sources? By default, it's all cores.
>
Possible enhancement -
1) Drain the responses in the xmit_frame() path. That is, post the TX-request() and just before returning see if there are
any more responses in the RX-queue. This will minimize(only if the NIC f/w coalesces) interrupt load.
The n/w core should drain the responses rather than calling the drain-routine from the adapter's xmit_frame() handler. This way there won't be any need to
modify individual xmit_frame handlers.
PS - I'm not familiar with the networking code.
Chetan Loke
^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: >10% performance degradation since 2.6.18
2009-07-06 21:58 ` Chetan.Loke
@ 2009-07-07 22:05 ` Daniel J Blueman
2009-07-08 15:03 ` Chetan.Loke
0 siblings, 1 reply; 33+ messages in thread
From: Daniel J Blueman @ 2009-07-07 22:05 UTC (permalink / raw)
To: Chetan.Loke, matthew, andi, jens.axboe, Arjan van de Ven; +Cc: linux-kernel
On Mon, Jul 6, 2009 at 10:58 PM, <Chetan.Loke@emulex.com> wrote:
>> -----Original Message-----
>> From: linux-kernel-owner@vger.kernel.org
>> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of
>> Daniel J Blueman
>> Sent: Sunday, July 05, 2009 7:01 AM
>> To: Matthew Wilcox; Andi Kleen
>> Cc: Linux Kernel; Jens Axboe; Arjan van de Ven
>> Subject: Re: >10% performance degradation since 2.6.18
>>
>> On Jul 3, 9:10 pm, Arjan van de Ven <ar...@infradead.org> wrote:
>> > On Fri, 3 Jul 2009 21:54:58 +0200
>> >
>> > Andi Kleen <a...@firstfloor.org> wrote:
>> > > > That would seem to be a fruitful avenue of investigation --
>> > > > whether limiting the cards to a single RX/TX interrupt would be
>> > > > advantageous, or whether spreading the eight interrupts
>> out over
>> > > > the CPUs would be advantageous.
>> >
>> > > The kernel should really do the per cpu binding of MSIs
>> by default.
>> >
>> > ... so that you can't do power management on a per socket basis?
>> > hardly a good idea.
>> >
>> > just need to use a new enough irqbalance and it will spread out the
>> > interrupts unless your load is low enough to go into low power mode.
>>
>> I was finding newer kernels (>~2.6.24) would set the
>> Redirection Hint bit in the MSI address vector, allowing the
>> processors to deliver the interrupt to the lowest interrupt
>> priority (eg idle, no powersave) core
>> (http://www.intel.com/Assets/PDF/manual/253668.pdf pp10-66)
>> and older irqbalance daemons would periodically naively
>> rewrite the bitmask of cores, delivering the interrupt to a
>> static one.
>>
>> Thus, it may be worth checking if disabling any older
>> irqbalance daemon gives any win.
>>
>> Perhaps there is value in writing different subsets of cores
>> to the MSI address vector core bitmask (with the redirection
>> hint enabled) for different I/O queues on heavy interrupt
>> sources? By default, it's all cores.
>>
>
> Possible enhancement -
>
> 1) Drain the responses in the xmit_frame() path. That is, post the TX-request() and just before returning see if there are
> any more responses in the RX-queue. This will minimize(only if the NIC f/w coalesces) interrupt load.
> The n/w core should drain the responses rather than calling the drain-routine from the adapter's xmit_frame() handler. This way there won't be any need to
> modify individual xmit_frame handlers.
The problem of additional checking on such a hot path, is each
(synchronous) read over the PCIe bus takes ~1us, which is the same
order of cost of executing 1000 instructions (and getting greater with
faster processors and deeper serial buses). Perhaps it's sufficiently
low cost if the NIC's RX queue status/structure was in main memory (vs
registers over PCI).
If latency is not favoured over throughput, increasing the packet
coalescing watermarks may reduce interrupt rate and thus some
performance loss?
Daniel
--
Daniel J Blueman
^ permalink raw reply [flat|nested] 33+ messages in thread
* RE: >10% performance degradation since 2.6.18
2009-07-07 22:05 ` Daniel J Blueman
@ 2009-07-08 15:03 ` Chetan.Loke
0 siblings, 0 replies; 33+ messages in thread
From: Chetan.Loke @ 2009-07-08 15:03 UTC (permalink / raw)
To: daniel.blueman, matthew, andi, jens.axboe, arjan; +Cc: linux-kernel
> -----Original Message-----
> From: Daniel J Blueman [mailto:daniel.blueman@gmail.com]
> Sent: Tuesday, July 07, 2009 6:06 PM
> To: Loke,Chetan; matthew@wil.cx; andi@firstfloor.org;
> jens.axboe@oracle.com; Arjan van de Ven
> Cc: linux-kernel@vger.kernel.org
> Subject: Re: >10% performance degradation since 2.6.18
>
> On Mon, Jul 6, 2009 at 10:58 PM, <Chetan.Loke@emulex.com> wrote:
> >> -----Original Message-----
> >> From: linux-kernel-owner@vger.kernel.org
> >> [mailto:linux-kernel-owner@vger.kernel.org] On Behalf Of Daniel J
> >> Blueman
> >> Sent: Sunday, July 05, 2009 7:01 AM
> >> To: Matthew Wilcox; Andi Kleen
> >> Cc: Linux Kernel; Jens Axboe; Arjan van de Ven
> >> Subject: Re: >10% performance degradation since 2.6.18
> >>
> >> On Jul 3, 9:10 pm, Arjan van de Ven <ar...@infradead.org> wrote:
> >> > On Fri, 3 Jul 2009 21:54:58 +0200
> >> >
> >> > Andi Kleen <a...@firstfloor.org> wrote:
> >> > > > That would seem to be a fruitful avenue of investigation --
> >> > > > whether limiting the cards to a single RX/TX
> interrupt would be
> >> > > > advantageous, or whether spreading the eight interrupts
> >> out over
> >> > > > the CPUs would be advantageous.
> >> >
> >> > > The kernel should really do the per cpu binding of MSIs
> >> by default.
> >> >
> >> > ... so that you can't do power management on a per socket basis?
> >> > hardly a good idea.
> >> >
> >> > just need to use a new enough irqbalance and it will
> spread out the
> >> > interrupts unless your load is low enough to go into low
> power mode.
> >>
> >> I was finding newer kernels (>~2.6.24) would set the
> Redirection Hint
> >> bit in the MSI address vector, allowing the processors to
> deliver the
> >> interrupt to the lowest interrupt priority (eg idle, no powersave)
> >> core (http://www.intel.com/Assets/PDF/manual/253668.pdf
> pp10-66) and
> >> older irqbalance daemons would periodically naively rewrite the
> >> bitmask of cores, delivering the interrupt to a static one.
> >>
> >> Thus, it may be worth checking if disabling any older irqbalance
> >> daemon gives any win.
> >>
> >> Perhaps there is value in writing different subsets of
> cores to the
> >> MSI address vector core bitmask (with the redirection hint
> enabled)
> >> for different I/O queues on heavy interrupt sources? By
> default, it's
> >> all cores.
> >>
> >
> > Possible enhancement -
> >
> > 1) Drain the responses in the xmit_frame() path. That is, post the
> > TX-request() and just before returning see if there are
> > any more responses in the RX-queue. This will
> minimize(only if the NIC f/w coalesces) interrupt load.
> > The n/w core should drain the responses rather than calling the
> > drain-routine from the adapter's xmit_frame() handler. This
> way there
> > won't be any need to
> > modify individual xmit_frame handlers.
>
> The problem of additional checking on such a hot path, is each
> (synchronous) read over the PCIe bus takes ~1us, which is the
> same order of cost of executing 1000 instructions (and
> getting greater with faster processors and deeper serial
> buses).
Totally agree. Non-posted transactions are expensive.
> Perhaps it's sufficiently low cost if the NIC's RX
> queue status/structure was in main memory (vs registers over PCI).
>
Ok, I was under the impression that the RX-pointers are in the host-memory. And
so it would be a local mem-read as opposed to a PCI-transaction. So this
is obviously a NIC-design(ASIC/fw) decision.Nothing much we can do about it.
> If latency is not favoured over throughput,
> increasing the
> packet coalescing watermarks may reduce interrupt rate and
> thus some performance loss?
>
> Daniel
Well, coalescing goes hand-in-hand.We can't optimize just the 'driver/OS' stack and not optimize the adapter @ all.
Lets assume(and this was my assumption) the (partial)RX-structs are in host's memory.
So,
1) The RX-put ptr is in the host-memory(NIC updates by a posted transaction).
2) The RX-get ptr is on the NIC(host updates by a posted-transaction.PCIe bridge will coalesce the posted-writes).
3) Under heavy load the TX path is getting beat up really heavy.
3.1) The modified algo will read(now a local-read) the RX-put ptr and drain(after posting the TX-job) the RX-queue.
3.2) The host then updates the RX-get ptr on the NIC via a posted-write(don't flush the write,let the bridge coalesce).
Coalescing has so far worked for us. So it should work for others.But we can't speak for the chipsets.
3.3) This is where the coalescing algo kicks-in on the NIC(adapter) side.
3.3.1) The NIC f/w reads(local read) the RX-get ptr and does different things -
3.3.1.1) If the host is making good progress then it should reset the interrupt-timer.
3.3.1.2) If the host is not making enough progress(latency-algorithm) then it should fire the interrupt.
This will ensure timely response and lower-latency under bursty loads.
I think some chipsets support a relaxed version of PCI-read. So drivers could use that unless you really want to flush your posted-write.
Chetan Loke
^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2009-07-08 15:04 UTC | newest]
Thread overview: 33+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-03 2:56 >10% performance degradation since 2.6.18 Matthew Wilcox
2009-07-03 17:04 ` Paul E. McKenney
2009-07-03 18:19 ` Andi Kleen
2009-07-03 18:54 ` Jens Axboe
2009-07-03 19:13 ` Matthew Wilcox
2009-07-03 19:22 ` Jens Axboe
2009-07-03 19:45 ` Matthew Wilcox
2009-07-03 19:54 ` Andi Kleen
2009-07-03 20:04 ` Arjan van de Ven
2009-07-03 23:35 ` Andi Kleen
2009-07-04 6:04 ` Arjan van de Ven
2009-07-04 8:44 ` Andi Kleen
2009-07-04 9:19 ` Jeff Garzik
2009-07-05 4:01 ` Herbert Xu
2009-07-05 13:09 ` Matthew Wilcox
2009-07-05 16:11 ` Herbert Xu
2009-07-06 8:38 ` Andi Kleen
2009-07-05 20:44 ` Jeff Garzik
2009-07-06 1:19 ` Herbert Xu
2009-07-06 8:45 ` Andi Kleen
2009-07-06 17:00 ` Rick Jones
2009-07-06 17:36 ` Ma, Chinang
2009-07-06 17:42 ` Matthew Wilcox
2009-07-06 17:57 ` Ma, Chinang
2009-07-06 18:05 ` Matthew Wilcox
2009-07-06 18:48 ` Ma, Chinang
2009-07-06 18:53 ` Matthew Wilcox
2009-07-06 21:16 ` Ma, Chinang
2009-07-07 8:16 ` Andi Kleen
-- strict thread matches above, loose matches on Subject: below --
2009-07-05 11:00 Daniel J Blueman
2009-07-06 21:58 ` Chetan.Loke
2009-07-07 22:05 ` Daniel J Blueman
2009-07-08 15:03 ` Chetan.Loke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox