From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
To: "Greg Kroah-Hartman" <gregkh@suse.de>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 08/10] Staging: rtl8187se/ieee80211: switch to use <linux/ieee80211.h>
Date: Mon, 13 Jul 2009 20:02:04 +0200 [thread overview]
Message-ID: <20090713180204.15985.24411.sendpatchset@localhost.localdomain> (raw)
In-Reply-To: <20090713180112.15985.88819.sendpatchset@localhost.localdomain>
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtl8187se/ieee80211: switch to use <linux/ieee80211.h>
While at it:
* remove some commented out code
* remove some unused definitions
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
drivers/staging/rtl8187se/TODO | 1
drivers/staging/rtl8187se/ieee80211/ieee80211.h | 122 ------------------------
2 files changed, 1 insertion(+), 122 deletions(-)
Index: b/drivers/staging/rtl8187se/TODO
===================================================================
--- a/drivers/staging/rtl8187se/TODO
+++ b/drivers/staging/rtl8187se/TODO
@@ -2,7 +2,6 @@ TODO:
- prepare private ieee80211 stack for merge with rtl8192su's version:
- add hwsec_active flag to struct ieee80211_device
- add bHwSec flag to cb_desc structure
- - switch ieee80211.h to use <linux/ieee80211.h>
- switch to use shared "librtl" instead of private ieee80211 stack
- switch to use LIB80211
- switch to use MAC80211
Index: b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
===================================================================
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -30,20 +30,7 @@
#include <linux/timer.h>
#include <linux/sched.h>
#include <linux/wireless.h>
-
-/*
-#ifndef bool
-#define bool int
-#endif
-
-#ifndef true
-#define true 1
-#endif
-
-#ifndef false
-#define false 0
-#endif
-*/
+#include <linux/ieee80211.h>
#define KEY_TYPE_NA 0x0
#define KEY_TYPE_WEP40 0x1
@@ -247,61 +234,8 @@ struct eapol {
#define MAX_FRAG_THRESHOLD 2346U
/* Frame control field constants */
-#define IEEE80211_FCTL_VERS 0x0002
-#define IEEE80211_FCTL_FTYPE 0x000c
-#define IEEE80211_FCTL_STYPE 0x00f0
-#define IEEE80211_FCTL_TODS 0x0100
-#define IEEE80211_FCTL_FROMDS 0x0200
#define IEEE80211_FCTL_DSTODS 0x0300 //added by david
-#define IEEE80211_FCTL_MOREFRAGS 0x0400
-#define IEEE80211_FCTL_RETRY 0x0800
-#define IEEE80211_FCTL_PM 0x1000
-#define IEEE80211_FCTL_MOREDATA 0x2000
#define IEEE80211_FCTL_WEP 0x4000
-#define IEEE80211_FCTL_ORDER 0x8000
-
-#define IEEE80211_FTYPE_MGMT 0x0000
-#define IEEE80211_FTYPE_CTL 0x0004
-#define IEEE80211_FTYPE_DATA 0x0008
-
-/* management */
-#define IEEE80211_STYPE_ASSOC_REQ 0x0000
-#define IEEE80211_STYPE_ASSOC_RESP 0x0010
-#define IEEE80211_STYPE_REASSOC_REQ 0x0020
-#define IEEE80211_STYPE_REASSOC_RESP 0x0030
-#define IEEE80211_STYPE_PROBE_REQ 0x0040
-#define IEEE80211_STYPE_PROBE_RESP 0x0050
-#define IEEE80211_STYPE_BEACON 0x0080
-#define IEEE80211_STYPE_ATIM 0x0090
-#define IEEE80211_STYPE_DISASSOC 0x00A0
-#define IEEE80211_STYPE_AUTH 0x00B0
-#define IEEE80211_STYPE_DEAUTH 0x00C0
-#define IEEE80211_STYPE_MANAGE_ACT 0x00D0
-
-/* control */
-#define IEEE80211_STYPE_PSPOLL 0x00A0
-#define IEEE80211_STYPE_RTS 0x00B0
-#define IEEE80211_STYPE_CTS 0x00C0
-#define IEEE80211_STYPE_ACK 0x00D0
-#define IEEE80211_STYPE_CFEND 0x00E0
-#define IEEE80211_STYPE_CFENDACK 0x00F0
-
-/* data */
-#define IEEE80211_STYPE_DATA 0x0000
-#define IEEE80211_STYPE_DATA_CFACK 0x0010
-#define IEEE80211_STYPE_DATA_CFPOLL 0x0020
-#define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
-#define IEEE80211_STYPE_NULLFUNC 0x0040
-#define IEEE80211_STYPE_CFACK 0x0050
-#define IEEE80211_STYPE_CFPOLL 0x0060
-#define IEEE80211_STYPE_CFACKPOLL 0x0070
-#define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
-#define IEEE80211_STYPE_QOS_NULL 0x00C0
-
-
-#define IEEE80211_SCTL_FRAG 0x000F
-#define IEEE80211_SCTL_SEQ 0xFFF0
-
/* debug macros */
@@ -407,63 +341,9 @@ struct ieee80211_snap_hdr {
#define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
#define WLAN_GET_SEQ_SEQ(seq) ((seq) & IEEE80211_SCTL_SEQ)
-/* Authentication algorithms */
-#define WLAN_AUTH_OPEN 0
-#define WLAN_AUTH_SHARED_KEY 1
-
-#define WLAN_AUTH_CHALLENGE_LEN 128
-
#define WLAN_CAPABILITY_BSS (1<<0)
-#define WLAN_CAPABILITY_IBSS (1<<1)
-#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
-#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
-#define WLAN_CAPABILITY_PRIVACY (1<<4)
-#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
-#define WLAN_CAPABILITY_PBCC (1<<6)
-#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
-/* Status codes */
-#define WLAN_STATUS_SUCCESS 0
-#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
-#define WLAN_STATUS_CAPS_UNSUPPORTED 10
-#define WLAN_STATUS_REASSOC_NO_ASSOC 11
-#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
-#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
-#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
-#define WLAN_STATUS_CHALLENGE_FAIL 15
-#define WLAN_STATUS_AUTH_TIMEOUT 16
-#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
-#define WLAN_STATUS_ASSOC_DENIED_RATES 18
-/* 802.11b */
-#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
-#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
-#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
-
-/* Reason codes */
-#define WLAN_REASON_UNSPECIFIED 1
-#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
-#define WLAN_REASON_DEAUTH_LEAVING 3
-#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
-#define WLAN_REASON_DISASSOC_AP_BUSY 5
-#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
-#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
-#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
-#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
-
-
-/* Information Element IDs */
-#define WLAN_EID_SSID 0
-#define WLAN_EID_SUPP_RATES 1
-#define WLAN_EID_FH_PARAMS 2
-#define WLAN_EID_DS_PARAMS 3
-#define WLAN_EID_CF_PARAMS 4
-#define WLAN_EID_TIM 5
-#define WLAN_EID_IBSS_PARAMS 6
-#define WLAN_EID_CHALLENGE 16
-#define WLAN_EID_RSN 48
-#define WLAN_EID_GENERIC 221
-
#define IEEE80211_MGMT_HDR_LEN 24
#define IEEE80211_DATA_HDR3_LEN 24
#define IEEE80211_DATA_HDR4_LEN 30
next prev parent reply other threads:[~2009-07-13 17:55 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-07-13 18:01 [PATCH 00/10] Stagging: rtl8187se updates Bartlomiej Zolnierkiewicz
2009-07-13 18:01 ` [PATCH 01/10] Staging: rtl8187se/ieee80211: remove OPENSUSE_SLED ifdefs Bartlomiej Zolnierkiewicz
2009-07-13 18:01 ` [PATCH 02/10] Staging: rtl8187se/ieee80211: remove FEDORACORE_9 ifdef Bartlomiej Zolnierkiewicz
2009-07-13 18:01 ` [PATCH 03/10] Staging: rtl8187se/ieee80211: remove NOT_YET ifdefs Bartlomiej Zolnierkiewicz
2009-07-13 18:01 ` [PATCH 04/10] Staging: rtl8187se: remove ENABLE_IPS ifdefs Bartlomiej Zolnierkiewicz
2009-07-13 18:01 ` [PATCH 05/10] Staging: rtl8187se: rename struct ieee80211_hdr to struct ieee80211_hdr_4addr Bartlomiej Zolnierkiewicz
2009-07-13 18:01 ` [PATCH 06/10] Staging: rtl8187se: rename struct ieee80211_hdr_3addr_qos to struct ieee80211_hdr_3addrqos Bartlomiej Zolnierkiewicz
2009-07-13 18:01 ` [PATCH 07/10] Staging: rtl8187se: rename struct ieee80211_hdr_QOS to struct ieee80211_hdr_4addrqos Bartlomiej Zolnierkiewicz
2009-07-13 18:02 ` Bartlomiej Zolnierkiewicz [this message]
2009-07-13 18:02 ` [PATCH 09/10] Staging: rtl8187se/ieee80211: ieee80211.h reorderings Bartlomiej Zolnierkiewicz
2009-07-13 18:02 ` [PATCH 10/10] Staging: rtl8187se/ieee80211: convert MMIE_TYPE_* defines to enums Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090713180204.15985.24411.sendpatchset@localhost.localdomain \
--to=bzolnier@gmail.com \
--cc=gregkh@suse.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox