[PATCH 06/10] Staging: rtl8192su: remove NOT_YET ifdefs

[Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>]

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] Staging: rtl8192su: remove NOT_YET ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c |  124 ---------------------
 drivers/staging/rtl8192su/r8192S_firmware.c        |    5 
 drivers/staging/rtl8192su/r8192S_phy.c             |   23 ---
 3 files changed, 152 deletions(-)

Index: b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
===================================================================
--- a/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192su/ieee80211/ieee80211_rx.c
@@ -236,51 +236,6 @@ ieee80211_rx_frame_mgmt(struct ieee80211
 
 	return 0;
 
-	#ifdef NOT_YET
-	if (ieee->iw_mode == IW_MODE_MASTER) {
-		printk(KERN_DEBUG "%s: Master mode not yet suppported.\n",
-		       ieee->dev->name);
-		return 0;
-/*
-  hostap_update_sta_ps(ieee, (struct hostap_ieee80211_hdr_4addr *)
-  skb->data);*/
-	}
-
-	if (ieee->hostapd && type == IEEE80211_TYPE_MGMT) {
-		if (stype == WLAN_FC_STYPE_BEACON &&
-		    ieee->iw_mode == IW_MODE_MASTER) {
-			struct sk_buff *skb2;
-			/* Process beacon frames also in kernel driver to
-			 * update STA(AP) table statistics */
-			skb2 = skb_clone(skb, GFP_ATOMIC);
-			if (skb2)
-				hostap_rx(skb2->dev, skb2, rx_stats);
-		}
-
-		/* send management frames to the user space daemon for
-		 * processing */
-		ieee->apdevstats.rx_packets++;
-		ieee->apdevstats.rx_bytes += skb->len;
-		prism2_rx_80211(ieee->apdev, skb, rx_stats, PRISM2_RX_MGMT);
-		return 0;
-	}
-
-	    if (ieee->iw_mode == IW_MODE_MASTER) {
-		if (type != WLAN_FC_TYPE_MGMT && type != WLAN_FC_TYPE_CTRL) {
-			printk(KERN_DEBUG "%s: unknown management frame "
-			       "(type=0x%02x, stype=0x%02x) dropped\n",
-			       skb->dev->name, type, stype);
-			return -1;
-		}
-
-		hostap_rx(skb->dev, skb, rx_stats);
-		return 0;
-	}
-
-	printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: management frame "
-	       "received in non-Host AP mode\n", skb->dev->name);
-	return -1;
-	#endif
 }
 
 
@@ -923,14 +878,6 @@ int ieee80211_rx(struct ieee80211_device
 	PRX_TS_RECORD pTS = NULL;
 	//bool bIsAggregateFrame = false;
 	//added by amy for reorder
-#ifdef NOT_YET
-	struct net_device *wds = NULL;
-	struct sk_buff *skb2 = NULL;
-	struct net_device *wds = NULL;
-	int frame_authorized = 0;
-	int from_assoc_ap = 0;
-	void *sta = NULL;
-#endif
 //	u16 qos_ctl = 0;
 	u8 dst[ETH_ALEN];
 	u8 src[ETH_ALEN];
@@ -967,22 +914,6 @@ int ieee80211_rx(struct ieee80211_device
 	}
 
 	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
-#ifdef NOT_YET
-	/* Put this code here so that we avoid duplicating it in all
-	 * Rx paths. - Jean II */
-#ifdef IW_WIRELESS_SPY		/* defined in iw_handler.h */
-	/* If spy monitoring on */
-	if (iface->spy_data.spy_number > 0) {
-		struct iw_quality wstats;
-		wstats.level = rx_stats->rssi;
-		wstats.noise = rx_stats->noise;
-		wstats.updated = 6;	/* No qual value */
-		/* Update spy records */
-		wireless_spy_update(dev, hdr->addr2, &wstats);
-	}
-#endif /* IW_WIRELESS_SPY */
-	hostap_update_rx_stats(local->ap, hdr, rx_stats);
-#endif
 
 	if (ieee->iw_mode == IW_MODE_MONITOR) {
 		ieee80211_monitor_rx(ieee, skb, rx_stats);
@@ -996,20 +927,6 @@ int ieee80211_rx(struct ieee80211_device
 		if (skb->len >= hdrlen + 3)
 			idx = skb->data[hdrlen + 3] >> 6;
 		crypt = ieee->crypt[idx];
-#ifdef NOT_YET
-		sta = NULL;
-
-		/* Use station specific key to override default keys if the
-		 * receiver address is a unicast address ("individual RA"). If
-		 * bcrx_sta_key parameter is set, station specific key is used
-		 * even with broad/multicast targets (this is against IEEE
-		 * 802.11, but makes it easier to use different keys with
-		 * stations that do not support WEP key mapping). */
-
-		if (!(hdr->addr1[0] & 0x01) || local->bcrx_sta_key)
-			(void) hostap_handle_sta_crypto(local, hdr, &crypt,
-							&sta);
-#endif
 
 		/* allow NULL decrypt to indicate an station specific override
 		 * for default encryption */
@@ -1108,46 +1025,9 @@ int ieee80211_rx(struct ieee80211_device
 		break;
 	}
 
-#ifdef NOT_YET
-	if (hostap_rx_frame_wds(ieee, hdr, fc, &wds))
-		goto rx_dropped;
-	if (wds) {
-		skb->dev = dev = wds;
-		stats = hostap_get_stats(dev);
-	}
-
-	if (ieee->iw_mode == IW_MODE_MASTER && !wds &&
-	    (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == IEEE80211_FCTL_FROMDS &&
-	    ieee->stadev &&
-	    memcmp(hdr->addr2, ieee->assoc_ap_addr, ETH_ALEN) == 0) {
-		/* Frame from BSSID of the AP for which we are a client */
-		skb->dev = dev = ieee->stadev;
-		stats = hostap_get_stats(dev);
-		from_assoc_ap = 1;
-	}
-#endif
 
 	dev->last_rx = jiffies;
 
-#ifdef NOT_YET
-	if ((ieee->iw_mode == IW_MODE_MASTER ||
-	     ieee->iw_mode == IW_MODE_REPEAT) &&
-	    !from_assoc_ap) {
-		switch (hostap_handle_sta_rx(ieee, dev, skb, rx_stats,
-					     wds != NULL)) {
-		case AP_RX_CONTINUE_NOT_AUTHORIZED:
-			frame_authorized = 0;
-			break;
-		case AP_RX_CONTINUE:
-			frame_authorized = 1;
-			break;
-		case AP_RX_DROP:
-			goto rx_dropped;
-		case AP_RX_EXIT:
-			goto rx_exit;
-		}
-	}
-#endif
 	//IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA, skb->data, skb->len);
 	/* Nullfunc frames may have PS-bit set, so they must be passed to
 	 * hostap_handle_sta_rx() before being dropped here. */
@@ -1389,10 +1269,6 @@ int ieee80211_rx(struct ieee80211_device
 #endif
 
  rx_exit:
-#ifdef NOT_YET
-	if (sta)
-		hostap_handle_sta_release(sta);
-#endif
 	return 1;
 
  rx_dropped:
Index: b/drivers/staging/rtl8192su/r8192S_firmware.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_firmware.c
+++ b/drivers/staging/rtl8192su/r8192S_firmware.c
@@ -291,11 +291,6 @@ FirmwareCheckReady(struct net_device *de
 
 		RT_TRACE(COMP_FIRMWARE, "FirmwareCheckReady(): Current RCR settings(%#x)\n", tmpU4b);
 
-#ifdef NOT_YET   //YJ,TMP
-		priv->TransmitConfig = read_nic_dword(dev, TCR);
-		RT_TRACE(COMP_FIRMWARE, "FirmwareCheckReady(): Current TCR settings(%x)\n", priv->TransmitConfig);
-		pHalData->FwRsvdTxPageCfg = read_nic_byte(dev, FW_RSVD_PG_CRTL);
-#endif
 
 		// Set to normal mode.
 		write_nic_byte(dev, LBKMD_SEL, LBK_NORMAL);
Index: b/drivers/staging/rtl8192su/r8192S_phy.c
===================================================================
--- a/drivers/staging/rtl8192su/r8192S_phy.c
+++ b/drivers/staging/rtl8192su/r8192S_phy.c
@@ -1696,29 +1696,6 @@ static bool phy_SetRFPowerState8192SU(st
 			case eRfOff:
 			  	if (priv->ieee80211->eRFPowerState == eRfSleep || priv->ieee80211->eRFPowerState == eRfOff)
 						break;
-#ifdef NOT_YET
-				// Make sure BusyQueue is empty befor turn off RFE pwoer.
-				for(QueueID = 0, i = 0; QueueID < MAX_TX_QUEUE; )
-				{
-					if(RTIsListEmpty(&Adapter->TcbBusyQueue[QueueID]))
-					{
-						QueueID++;
-						continue;
-					}
-					else
-					{
-						RT_TRACE(COMP_POWER, "eRf Off/Sleep: %d times TcbBusyQueue[%d] !=0 before doze!\n", (i+1), QueueID);
-						udelay(10);
-						i++;
-					}
-
-					if(i >= MAX_DOZE_WAITING_TIMES_9x)
-					{
-						RT_TRACE(COMP_POWER, "\n\n\n SetZebraRFPowerState8185B(): eRfOff: %d times TcbBusyQueue[%d] != 0 !!!\n\n\n", MAX_DOZE_WAITING_TIMES_9x, QueueID);
-						break;
-					}
-				}
-#endif
 				//
 				//RF Off/Sleep sequence. Designed/tested from SD4 Scott, SD1 Grent and Jonbon.
 				// Added by Bruce, 2008-11-22.