Re: [PATCH 4/4] ds2760: handle full_active_uAh == 0 case correctly

[Anton Vorontsov <avorontsov@ru.mvista.com>]

On Wed, Jul 15, 2009 at 12:06:25PM -0700, Andrew Morton wrote:
> On Wed, 15 Jul 2009 20:51:59 +0200
> Daniel Mack <daniel@caiaq.de> wrote:
> 
> > On Wed, Jul 15, 2009 at 11:06:29AM -0700, Matt Reimer wrote:
> > > On Jul 15, 2009, at 9:20 AM, Daniel Mack wrote:
> > >
> > >> In systems where the battery monitor is not part of the battery pack  
> > >> and
> > >> is hence not bootstrapped with sane values, the full_active_uAh is
> > >> likely to be zero.
> > >>
> > >> Handle that case by defaulting to the rated_capacity information which
> > >> can be passed to the driver using the new module parameter.
> > >>
> > >> Signed-off-by: Daniel Mack <daniel@caiaq.de>
> > >> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
> > >> Cc: Matt Reimer <mreimer@vpop.net>
> > >> Cc: Anton Vorontsov <cbou@mail.ru>
> > >
> > > Acked-by: Matt Reimer <mreimer@vpop.net>
> > 
> > Thanks Matt :) Andrew, will they go thru your channel?
> > 
> 
> Well.  I'll look at them, as I try to do when someone cc'ed me.  But
> drivers/power is usually handled by Anton?

Yep. All patches look good, I'll apply them to battery-2.6.git.

Thanks,

-- 
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2