Linux 2.6.30.2

Linux 2.6.30.2

[Greg KH]

I'm announcing the release of the 2.6.30.2 kernel.  All users of the
2.6.30 kernel series are very strongly encouraged to upgrade.

I'll also be replying to this message with a copy of the patch between
2.6.30.1 and 2.6.30.2

The updated 2.6.30.y git tree can be found at:
        git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.30.y.git
and can be browsed at the normal kernel.org git web browser:
        http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.30.y.git;a=summary

thanks,

greg k-h

------------

 Makefile                         |    7 +++--
 arch/alpha/include/asm/percpu.h  |    6 ++--
 arch/blackfin/kernel/irqchip.c   |   50 ++++++++-------------------------------
 arch/blackfin/kernel/setup.c     |    3 +-
 arch/blackfin/mach-common/head.S |   16 ++++++------
 arch/blackfin/mach-common/smp.c  |   13 +++++-----
 arch/x86/include/asm/pci.h       |    2 -
 block/blk-core.c                 |   10 +++----
 drivers/block/floppy.c           |    5 +++
 drivers/md/md.c                  |    8 ++++--
 drivers/md/raid5.c               |    3 +-
 drivers/net/tun.c                |    4 ++-
 drivers/pci/iova.c               |   26 +++++++++++++++++---
 fs/fuse/dev.c                    |    2 -
 fs/fuse/file.c                   |    2 -
 include/asm-generic/percpu.h     |    4 +++
 include/linux/mm.h               |    2 -
 include/linux/percpu-defs.h      |    3 +-
 include/linux/personality.h      |    5 +++
 include/linux/security.h         |    2 +
 kernel/futex.c                   |   43 ++++++++++++++++++---------------
 kernel/resource.c                |    2 -
 kernel/sysctl.c                  |    2 -
 lib/dma-debug.c                  |    2 -
 mm/Kconfig                       |   19 ++++++++++++++
 mm/mmap.c                        |    3 ++
 net/ipv4/arp.c                   |    7 +----
 security/Kconfig                 |   22 -----------------
 security/security.c              |    3 --
 29 files changed, 143 insertions(+), 133 deletions(-)

Christoph Lameter (1):
      security: use mmap_min_addr indepedently of security models

Csaba Henk (1):
      fuse: fix return value of fuse_dev_write()

David Woodhouse (2):
      Fix pci_unmap_addr() et al on i386.
      Fix iommu address space allocation

Eric W. Biederman (1):
      Revert "ipv4: arp announce, arp_proxy and windows ip conflict verification"

Eugene Teo (1):
      Add '-fno-delete-null-pointer-checks' to gcc CFLAGS

Greg Kroah-Hartman (1):
      Linux 2.6.30.2

Jiri Slaby (1):
      floppy: fix lock imbalance

Joerg Roedel (1):
      dma-debug: fix off-by-one error in overlap function

Julien Tinnes (1):
      personality: fix PER_CLEAR_ON_SETID (CVE-2009-1895)

Linus Torvalds (1):
      Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x

Mariusz Kozlowski (1):
      tun/tap: Fix crashes if open() /dev/net/tun and then poll() it. (CVE-2009-1897)

Mike Frysinger (2):
      Blackfin: redo handling of bad irqs
      Blackfin: fix command line corruption with DEBUG_DOUBLEFAULT

Miklos Szeredi (1):
      fuse: fix bad return value in fuse_file_poll()

NeilBrown (4):
      blocK: Restore barrier support for md and probably other virtual devices.
      md/raid5: suspend shouldn't affect read requests.
      md: fix error path when duplicate name is found on md device creation.
      md: avoid dereferencing NULL pointer when accessing suspend_* sysfs attributes.

Sonic Zhang (2):
      Blackfin: fix accidental reset in some boot modes
      Blackfin: fix deadlock in SMP IPI handler

Sonny Rao (1):
      futexes: Fix infinite loop in get_futex_key() on huge page

Tejun Heo (1):
      alpha: fix percpu build breakage

Thomas Gleixner (1):
      futex: Fix the write access fault problem for real

Zhang Rui (1):
      kernel/resource.c: fix sign extension in reserve_setup()

Re: Linux 2.6.30.2

[Greg KH]

diff --git a/Makefile b/Makefile
index f8a0893..ab8cda6 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = .1
+EXTRAVERSION = .2
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -351,7 +351,8 @@ KBUILD_CPPFLAGS := -D__KERNEL__
 
 KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
-		   -Werror-implicit-function-declaration
+		   -Werror-implicit-function-declaration \
+		   -fno-delete-null-pointer-checks
 KBUILD_AFLAGS   := -D__ASSEMBLY__
 
 # Read KERNELRELEASE from include/config/kernel.release (if it exists)
@@ -573,7 +574,7 @@ KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
 KBUILD_CFLAGS += $(call cc-option,-Wno-pointer-sign,)
 
 # disable invalid "can't wrap" optimizations for signed / pointers
-KBUILD_CFLAGS	+= $(call cc-option,-fwrapv)
+KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
 # revert to pre-gcc-4.4 behaviour of .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index 06c5c7a..b663f1f 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -30,7 +30,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #ifndef MODULE
 #define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset))
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 #else
 /*
  * To calculate addresses of locally defined variables, GCC uses 32-bit
@@ -49,7 +49,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 		: "=&r"(__ptr), "=&r"(tmp_gp));		\
 	(typeof(&per_cpu_var(var)))(__ptr + (offset)); })
 
-#define PER_CPU_ATTRIBUTES	__used
+#define PER_CPU_DEF_ATTRIBUTES	__used
 
 #endif /* MODULE */
 
@@ -71,7 +71,7 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 #define __get_cpu_var(var)		per_cpu_var(var)
 #define __raw_get_cpu_var(var)		per_cpu_var(var)
 
-#define PER_CPU_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
 
 #endif /* SMP */
 
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 401bd32..6ab0532 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -38,14 +38,6 @@
 #include <asm/pda.h>
 
 static atomic_t irq_err_count;
-static spinlock_t irq_controller_lock;
-
-/*
- * Dummy mask/unmask handler
- */
-void dummy_mask_unmask_irq(unsigned int irq)
-{
-}
 
 void ack_bad_irq(unsigned int irq)
 {
@@ -53,21 +45,9 @@ void ack_bad_irq(unsigned int irq)
 	printk(KERN_ERR "IRQ: spurious interrupt %d\n", irq);
 }
 
-static struct irq_chip bad_chip = {
-	.ack = dummy_mask_unmask_irq,
-	.mask = dummy_mask_unmask_irq,
-	.unmask = dummy_mask_unmask_irq,
-};
-
 static struct irq_desc bad_irq_desc = {
-	.status = IRQ_DISABLED,
-	.chip = &bad_chip,
 	.handle_irq = handle_bad_irq,
-	.depth = 1,
 	.lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock),
-#ifdef CONFIG_SMP
-	.affinity = CPU_MASK_ALL
-#endif
 };
 
 #ifdef CONFIG_CPUMASK_OFFSTACK
@@ -117,21 +97,13 @@ __attribute__((l1_text))
 #endif
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
-	struct pt_regs *old_regs;
-	struct irq_desc *desc = irq_desc + irq;
 #ifndef CONFIG_IPIPE
 	unsigned short pending, other_ints;
 #endif
-	old_regs = set_irq_regs(regs);
-
-	/*
-	 * Some hardware gives randomly wrong interrupts.  Rather
-	 * than crashing, do something sensible.
-	 */
-	if (irq >= NR_IRQS)
-		desc = &bad_irq_desc;
+	struct pt_regs *old_regs = set_irq_regs(regs);
 
 	irq_enter();
+
 #ifdef CONFIG_DEBUG_STACKOVERFLOW
 	/* Debugging check for stack overflow: is there less than STACK_WARN free? */
 	{
@@ -147,7 +119,15 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 		}
 	}
 #endif
-	generic_handle_irq(irq);
+
+	/*
+	 * Some hardware gives randomly wrong interrupts.  Rather
+	 * than crashing, do something sensible.
+	 */
+	if (irq >= NR_IRQS)
+		handle_bad_irq(irq, &bad_irq_desc);
+	else
+		generic_handle_irq(irq);
 
 #ifndef CONFIG_IPIPE
 	/*
@@ -171,14 +151,6 @@ asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
 
 void __init init_IRQ(void)
 {
-	struct irq_desc *desc;
-	int irq;
-
-	spin_lock_init(&irq_controller_lock);
-	for (irq = 0, desc = irq_desc; irq < NR_IRQS; irq++, desc++) {
-		*desc = bad_irq_desc;
-	}
-
 	init_arch_irq();
 
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index a58687b..b550bae 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -831,7 +831,8 @@ void __init setup_arch(char **cmdline_p)
     defined(CONFIG_BF538) || defined(CONFIG_BF539)
 	_bfin_swrst = bfin_read_SWRST();
 #else
-	_bfin_swrst = bfin_read_SYSCR();
+	/* Clear boot mode field */
+	_bfin_swrst = bfin_read_SYSCR() & ~0xf;
 #endif
 
 #ifdef CONFIG_DEBUG_DOUBLEFAULT_PRINT
diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S
index 698d4c0..7e5143c 100644
--- a/arch/blackfin/mach-common/head.S
+++ b/arch/blackfin/mach-common/head.S
@@ -126,25 +126,25 @@ ENTRY(__start)
 	 * below
 	 */
 	GET_PDA(p0, r0);
-	r7 = [p0 + PDA_RETX];
+	r6 = [p0 + PDA_RETX];
 	p1.l = _init_saved_retx;
 	p1.h = _init_saved_retx;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_DCPLB];
+	r6 = [p0 + PDA_DCPLB];
 	p1.l = _init_saved_dcplb_fault_addr;
 	p1.h = _init_saved_dcplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_ICPLB];
+	r6 = [p0 + PDA_ICPLB];
 	p1.l = _init_saved_icplb_fault_addr;
 	p1.h = _init_saved_icplb_fault_addr;
-	[p1] = r7;
+	[p1] = r6;
 
-	r7 = [p0 + PDA_SEQSTAT];
+	r6 = [p0 + PDA_SEQSTAT];
 	p1.l = _init_saved_seqstat;
 	p1.h = _init_saved_seqstat;
-	[p1] = r7;
+	[p1] = r6;
 #endif
 
 	/* Initialize stack pointer */
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 93eab61..66fb780 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -139,7 +139,7 @@ static void ipi_call_function(unsigned int cpu, struct ipi_message *msg)
 
 static irqreturn_t ipi_handler(int irq, void *dev_instance)
 {
-	struct ipi_message *msg, *mg;
+	struct ipi_message *msg;
 	struct ipi_message_queue *msg_queue;
 	unsigned int cpu = smp_processor_id();
 
@@ -149,7 +149,8 @@ static irqreturn_t ipi_handler(int irq, void *dev_instance)
 	msg_queue->count++;
 
 	spin_lock(&msg_queue->lock);
-	list_for_each_entry_safe(msg, mg, &msg_queue->head, list) {
+	while (!list_empty(&msg_queue->head)) {
+		msg = list_entry(msg_queue->head.next, typeof(*msg), list);
 		list_del(&msg->list);
 		switch (msg->type) {
 		case BFIN_IPI_RESCHEDULE:
@@ -216,7 +217,7 @@ int smp_call_function(void (*func)(void *info), void *info, int wait)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
@@ -256,7 +257,7 @@ int smp_call_function_single(int cpuid, void (*func) (void *info), void *info,
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -287,7 +288,7 @@ void smp_send_reschedule(int cpu)
 
 	msg_queue = &per_cpu(ipi_msg_queue, cpu);
 	spin_lock_irqsave(&msg_queue->lock, flags);
-	list_add(&msg->list, &msg_queue->head);
+	list_add_tail(&msg->list, &msg_queue->head);
 	spin_unlock_irqrestore(&msg_queue->lock, flags);
 	platform_send_ipi_cpu(cpu);
 
@@ -315,7 +316,7 @@ void smp_send_stop(void)
 	for_each_cpu_mask(cpu, callmap) {
 		msg_queue = &per_cpu(ipi_msg_queue, cpu);
 		spin_lock_irqsave(&msg_queue->lock, flags);
-		list_add(&msg->list, &msg_queue->head);
+		list_add_tail(&msg->list, &msg_queue->head);
 		spin_unlock_irqrestore(&msg_queue->lock, flags);
 		platform_send_ipi_cpu(cpu);
 	}
diff --git a/arch/x86/include/asm/pci.h b/arch/x86/include/asm/pci.h
index b51a1e8..abbc09b 100644
--- a/arch/x86/include/asm/pci.h
+++ b/arch/x86/include/asm/pci.h
@@ -91,7 +91,7 @@ extern void pci_iommu_alloc(void);
 
 #define PCI_DMA_BUS_IS_PHYS (dma_ops->is_phys)
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DMA_API_DEBUG)
+#if defined(CONFIG_X86_64) || defined(CONFIG_DMAR) || defined(CONFIG_DMA_API_DEBUG)
 
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)       \
 	        dma_addr_t ADDR_NAME;
diff --git a/block/blk-core.c b/block/blk-core.c
index c89883b..a59f180 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1158,6 +1158,11 @@ static int __make_request(struct request_queue *q, struct bio *bio)
 
 	nr_sectors = bio_sectors(bio);
 
+	if (bio_barrier(bio) && bio_has_data(bio) &&
+	    (q->next_ordered == QUEUE_ORDERED_NONE)) {
+		bio_endio(bio, -EOPNOTSUPP);
+		return 0;
+	}
 	/*
 	 * low level driver can indicate that it wants pages above a
 	 * certain limit bounced to low memory (ie for highmem, or even
@@ -1461,11 +1466,6 @@ static inline void __generic_make_request(struct bio *bio)
 			err = -EOPNOTSUPP;
 			goto end_io;
 		}
-		if (bio_barrier(bio) && bio_has_data(bio) &&
-		    (q->next_ordered == QUEUE_ORDERED_NONE)) {
-			err = -EOPNOTSUPP;
-			goto end_io;
-		}
 
 		ret = q->make_request_fn(q, bio);
 	} while (ret);
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 1300df6..39e1b58 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3327,7 +3327,10 @@ static inline int set_geometry(unsigned int cmd, struct floppy_struct *g,
 		if (!capable(CAP_SYS_ADMIN))
 			return -EPERM;
 		mutex_lock(&open_lock);
-		LOCK_FDC(drive, 1);
+		if (lock_fdc(drive, 1)) {
+			mutex_unlock(&open_lock);
+			return -EINTR;
+		}
 		floppy_type[type] = *g;
 		floppy_type[type].name = "user format";
 		for (cnt = type << 2; cnt < (type << 2) + 4; cnt++)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 641b211..eb1b73f 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3589,7 +3589,8 @@ suspend_lo_store(mddev_t *mddev, const char *buf, size_t len)
 	char *e;
 	unsigned long long new = simple_strtoull(buf, &e, 10);
 
-	if (mddev->pers->quiesce == NULL)
+	if (mddev->pers == NULL ||
+	    mddev->pers->quiesce == NULL)
 		return -EINVAL;
 	if (buf == e || (*e && *e != '\n'))
 		return -EINVAL;
@@ -3617,7 +3618,8 @@ suspend_hi_store(mddev_t *mddev, const char *buf, size_t len)
 	char *e;
 	unsigned long long new = simple_strtoull(buf, &e, 10);
 
-	if (mddev->pers->quiesce == NULL)
+	if (mddev->pers == NULL ||
+	    mddev->pers->quiesce == NULL)
 		return -EINVAL;
 	if (buf == e || (*e && *e != '\n'))
 		return -EINVAL;
@@ -3876,6 +3878,8 @@ static int md_alloc(dev_t dev, char *name)
 			if (mddev2->gendisk &&
 			    strcmp(mddev2->gendisk->disk_name, name) == 0) {
 				spin_unlock(&all_mddevs_lock);
+				mutex_unlock(&disks_mutex);
+				mddev_put(mddev);
 				return -EEXIST;
 			}
 		spin_unlock(&all_mddevs_lock);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index c0434e0..1f98ea4 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -3703,7 +3703,8 @@ static int make_request(struct request_queue *q, struct bio * bi)
 			/* FIXME what if we get a false positive because these
 			 * are being updated.
 			 */
-			if (logical_sector >= mddev->suspend_lo &&
+			if (bio_data_dir(bi) == WRITE &&
+			    logical_sector >= mddev->suspend_lo &&
 			    logical_sector < mddev->suspend_hi) {
 				release_stripe(sh);
 				schedule();
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 1be6a6b..8289292 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -486,12 +486,14 @@ static unsigned int tun_chr_poll(struct file *file, poll_table * wait)
 {
 	struct tun_file *tfile = file->private_data;
 	struct tun_struct *tun = __tun_get(tfile);
-	struct sock *sk = tun->sk;
+	struct sock *sk;
 	unsigned int mask = 0;
 
 	if (!tun)
 		return POLLERR;
 
+	sk = tun->sk;
+
 	DBG(KERN_INFO "%s: tun_chr_poll\n", tun->dev->name);
 
 	poll_wait(file, &tun->socket.wait, wait);
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 2287116..46dd440 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -1,9 +1,19 @@
 /*
- * Copyright (c) 2006, Intel Corporation.
+ * Copyright © 2006-2009, Intel Corporation.
  *
- * This file is released under the GPLv2.
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
  *
- * Copyright (C) 2006-2008 Intel Corporation
  * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
  */
 
@@ -123,7 +133,15 @@ move_left:
 	/* Insert the new_iova into domain rbtree by holding writer lock */
 	/* Add new node and rebalance tree. */
 	{
-		struct rb_node **entry = &((prev)), *parent = NULL;
+		struct rb_node **entry, *parent = NULL;
+
+		/* If we have 'prev', it's a valid place to start the
+		   insertion. Otherwise, start from the root. */
+		if (prev)
+			entry = &prev;
+		else
+			entry = &iovad->rbroot.rb_node;
+
 		/* Figure out where to put new node */
 		while (*entry) {
 			struct iova *this = container_of(*entry,
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index ba76b68..eb40335 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -904,7 +904,7 @@ static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov,
 			       unsigned long nr_segs, loff_t pos)
 {
 	int err;
-	unsigned nbytes = iov_length(iov, nr_segs);
+	size_t nbytes = iov_length(iov, nr_segs);
 	struct fuse_req *req;
 	struct fuse_out_header oh;
 	struct fuse_copy_state cs;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 06f30e9..053ff1c 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1867,7 +1867,7 @@ static unsigned fuse_file_poll(struct file *file, poll_table *wait)
 
 	req = fuse_get_req(fc);
 	if (IS_ERR(req))
-		return PTR_ERR(req);
+		return POLLERR;
 
 	req->in.h.opcode = FUSE_POLL;
 	req->in.h.nodeid = get_node_id(inode);
diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h
index d7d50d7..aa00800 100644
--- a/include/asm-generic/percpu.h
+++ b/include/asm-generic/percpu.h
@@ -97,4 +97,8 @@ extern void setup_per_cpu_areas(void);
 #define PER_CPU_ATTRIBUTES
 #endif
 
+#ifndef PER_CPU_DEF_ATTRIBUTES
+#define PER_CPU_DEF_ATTRIBUTES
+#endif
+
 #endif /* _ASM_GENERIC_PERCPU_H_ */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index bff1f0d..0c21af6 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -580,12 +580,10 @@ static inline void set_page_links(struct page *page, enum zone_type zone,
  */
 static inline unsigned long round_hint_to_min(unsigned long hint)
 {
-#ifdef CONFIG_SECURITY
 	hint &= PAGE_MASK;
 	if (((void *)hint != NULL) &&
 	    (hint < mmap_min_addr))
 		return PAGE_ALIGN(mmap_min_addr);
-#endif
 	return hint;
 }
 
diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h
index 8f921d7..68438e1 100644
--- a/include/linux/percpu-defs.h
+++ b/include/linux/percpu-defs.h
@@ -24,7 +24,8 @@
 
 #define DEFINE_PER_CPU_SECTION(type, name, section)			\
 	__attribute__((__section__(PER_CPU_BASE_SECTION section)))	\
-	PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+	PER_CPU_ATTRIBUTES PER_CPU_DEF_ATTRIBUTES			\
+	__typeof__(type) per_cpu__##name
 
 /*
  * Variant on the per-CPU variable declaration/definition theme used for
diff --git a/include/linux/personality.h b/include/linux/personality.h
index a84e9ff..1261208 100644
--- a/include/linux/personality.h
+++ b/include/linux/personality.h
@@ -40,7 +40,10 @@ enum {
  * Security-relevant compatibility flags that must be
  * cleared upon setuid or setgid exec:
  */
-#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE)
+#define PER_CLEAR_ON_SETID (READ_IMPLIES_EXEC  | \
+			    ADDR_NO_RANDOMIZE  | \
+			    ADDR_COMPAT_LAYOUT | \
+			    MMAP_PAGE_ZERO)
 
 /*
  * Personality types.
diff --git a/include/linux/security.h b/include/linux/security.h
index d5fd616..5eff459 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -2197,6 +2197,8 @@ static inline int security_file_mmap(struct file *file, unsigned long reqprot,
 				     unsigned long addr,
 				     unsigned long addr_only)
 {
+	if ((addr < mmap_min_addr) && !capable(CAP_SYS_RAWIO))
+		return -EACCES;
 	return 0;
 }
 
diff --git a/kernel/futex.c b/kernel/futex.c
index d546b2d..4d973bd 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -241,6 +241,7 @@ again:
 	if (err < 0)
 		return err;
 
+	page = compound_head(page);
 	lock_page(page);
 	if (!page->mapping) {
 		unlock_page(page);
@@ -278,6 +279,25 @@ void put_futex_key(int fshared, union futex_key *key)
 	drop_futex_key_refs(key);
 }
 
+/*
+ * fault_in_user_writeable - fault in user address and verify RW access
+ * @uaddr:	pointer to faulting user space address
+ *
+ * Slow path to fixup the fault we just took in the atomic write
+ * access to @uaddr.
+ *
+ * We have no generic implementation of a non destructive write to the
+ * user address. We know that we faulted in the atomic pagefault
+ * disabled section so we can as well avoid the #PF overhead by
+ * calling get_user_pages() right away.
+ */
+static int fault_in_user_writeable(u32 __user *uaddr)
+{
+	int ret = get_user_pages(current, current->mm, (unsigned long)uaddr,
+				 1, 1, 0, NULL, NULL);
+	return ret < 0 ? ret : 0;
+}
+
 static u32 cmpxchg_futex_value_locked(u32 __user *uaddr, u32 uval, u32 newval)
 {
 	u32 curval;
@@ -739,7 +759,6 @@ retry:
 retry_private:
 	op_ret = futex_atomic_op_inuser(op, uaddr2);
 	if (unlikely(op_ret < 0)) {
-		u32 dummy;
 
 		double_unlock_hb(hb1, hb2);
 
@@ -757,7 +776,7 @@ retry_private:
 			goto out_put_keys;
 		}
 
-		ret = get_user(dummy, uaddr2);
+		ret = fault_in_user_writeable(uaddr2);
 		if (ret)
 			goto out_put_keys;
 
@@ -1097,7 +1116,7 @@ retry:
 handle_fault:
 	spin_unlock(q->lock_ptr);
 
-	ret = get_user(uval, uaddr);
+	ret = fault_in_user_writeable(uaddr);
 
 	spin_lock(q->lock_ptr);
 
@@ -1552,16 +1571,9 @@ out:
 	return ret;
 
 uaddr_faulted:
-	/*
-	 * We have to r/w  *(int __user *)uaddr, and we have to modify it
-	 * atomically.  Therefore, if we continue to fault after get_user()
-	 * below, we need to handle the fault ourselves, while still holding
-	 * the mmap_sem.  This can occur if the uaddr is under contention as
-	 * we have to drop the mmap_sem in order to call get_user().
-	 */
 	queue_unlock(&q, hb);
 
-	ret = get_user(uval, uaddr);
+	ret = fault_in_user_writeable(uaddr);
 	if (ret)
 		goto out_put_key;
 
@@ -1657,17 +1669,10 @@ out:
 	return ret;
 
 pi_faulted:
-	/*
-	 * We have to r/w  *(int __user *)uaddr, and we have to modify it
-	 * atomically.  Therefore, if we continue to fault after get_user()
-	 * below, we need to handle the fault ourselves, while still holding
-	 * the mmap_sem.  This can occur if the uaddr is under contention as
-	 * we have to drop the mmap_sem in order to call get_user().
-	 */
 	spin_unlock(&hb->lock);
 	put_futex_key(fshared, &key);
 
-	ret = get_user(uval, uaddr);
+	ret = fault_in_user_writeable(uaddr);
 	if (!ret)
 		goto retry;
 
diff --git a/kernel/resource.c b/kernel/resource.c
index ac5f3a3..78b0872 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -787,7 +787,7 @@ static int __init reserve_setup(char *str)
 	static struct resource reserve[MAXRESERVE];
 
 	for (;;) {
-		int io_start, io_num;
+		unsigned int io_start, io_num;
 		int x = reserved;
 
 		if (get_option (&str, &io_start) != 2)
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index b2970d5..e5bfcc7 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -1225,7 +1225,6 @@ static struct ctl_table vm_table[] = {
 		.strategy	= &sysctl_jiffies,
 	},
 #endif
-#ifdef CONFIG_SECURITY
 	{
 		.ctl_name	= CTL_UNNUMBERED,
 		.procname	= "mmap_min_addr",
@@ -1234,7 +1233,6 @@ static struct ctl_table vm_table[] = {
 		.mode		= 0644,
 		.proc_handler	= &proc_doulongvec_minmax,
 	},
-#endif
 #ifdef CONFIG_NUMA
 	{
 		.ctl_name	= CTL_UNNUMBERED,
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index 2b16536..6a4e3d4 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -599,7 +599,7 @@ static inline bool overlap(void *addr, u64 size, void *start, void *end)
 
 	return ((addr >= start && addr < end) ||
 		(addr2 >= start && addr2 < end) ||
-		((addr < start) && (addr2 >= end)));
+		((addr < start) && (addr2 > end)));
 }
 
 static void check_for_illegal_area(struct device *dev, void *addr, u64 size)
diff --git a/mm/Kconfig b/mm/Kconfig
index c2b57d8..71830ba 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -226,6 +226,25 @@ config HAVE_MLOCKED_PAGE_BIT
 config MMU_NOTIFIER
 	bool
 
+config DEFAULT_MMAP_MIN_ADDR
+        int "Low address space to protect from user allocation"
+        default 4096
+        help
+	  This is the portion of low virtual memory which should be protected
+	  from userspace allocation.  Keeping a user from writing to low pages
+	  can help reduce the impact of kernel NULL pointer bugs.
+
+	  For most ia64, ppc64 and x86 users with lots of address space
+	  a value of 65536 is reasonable and should cause no problems.
+	  On arm and other archs it should not be higher than 32768.
+	  Programs which use vm86 functionality would either need additional
+	  permissions from either the LSM or the capabilities module or have
+	  this protection disabled.
+
+	  This value can be changed after boot using the
+	  /proc/sys/vm/mmap_min_addr tunable.
+
+
 config NOMMU_INITIAL_TRIM_EXCESS
 	int "Turn on mmap() excess space trimming before booting"
 	depends on !MMU
diff --git a/mm/mmap.c b/mm/mmap.c
index 6b7b1a9..2b43fa1 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -87,6 +87,9 @@ int sysctl_overcommit_ratio = 50;	/* default is 50% */
 int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
 struct percpu_counter vm_committed_as;
 
+/* amount of vm to protect from userspace access */
+unsigned long mmap_min_addr = CONFIG_DEFAULT_MMAP_MIN_ADDR;
+
 /*
  * Check that a process has enough memory to allocate a new virtual
  * mapping. 0 means there is enough memory for the allocation to
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index f11931c..9c22032 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -801,11 +801,8 @@ static int arp_process(struct sk_buff *skb)
  *  cache.
  */
 
-	/*
-	 *  Special case: IPv4 duplicate address detection packet (RFC2131)
-	 *  and Gratuitous ARP/ARP Announce. (RFC3927, Section 2.4)
-	 */
-	if (sip == 0 || tip == sip) {
+	/* Special case: IPv4 duplicate address detection packet (RFC2131) */
+	if (sip == 0) {
 		if (arp->ar_op == htons(ARPOP_REQUEST) &&
 		    inet_addr_type(net, tip) == RTN_LOCAL &&
 		    !arp_ignore(in_dev, sip, tip))
diff --git a/security/Kconfig b/security/Kconfig
index bb24477..d23c839 100644
--- a/security/Kconfig
+++ b/security/Kconfig
@@ -110,28 +110,8 @@ config SECURITY_ROOTPLUG
 
 	  See <http://www.linuxjournal.com/article.php?sid=6279> for
 	  more information about this module.
-	  
-	  If you are unsure how to answer this question, answer N.
-
-config SECURITY_DEFAULT_MMAP_MIN_ADDR
-        int "Low address space to protect from user allocation"
-        depends on SECURITY
-        default 0
-        help
-	  This is the portion of low virtual memory which should be protected
-	  from userspace allocation.  Keeping a user from writing to low pages
-	  can help reduce the impact of kernel NULL pointer bugs.
-
-	  For most ia64, ppc64 and x86 users with lots of address space
-	  a value of 65536 is reasonable and should cause no problems.
-	  On arm and other archs it should not be higher than 32768.
-	  Programs which use vm86 functionality would either need additional
-	  permissions from either the LSM or the capabilities module or have
-	  this protection disabled.
-
-	  This value can be changed after boot using the
-	  /proc/sys/vm/mmap_min_addr tunable.
 
+	  If you are unsure how to answer this question, answer N.
 
 source security/selinux/Kconfig
 source security/smack/Kconfig
diff --git a/security/security.c b/security/security.c
index 5284255..dc7674f 100644
--- a/security/security.c
+++ b/security/security.c
@@ -26,9 +26,6 @@ extern void security_fixup_ops(struct security_operations *ops);
 
 struct security_operations *security_ops;	/* Initialized to NULL */
 
-/* amount of vm to protect from userspace access */
-unsigned long mmap_min_addr = CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR;
-
 static inline int verify(struct security_operations *ops)
 {
 	/* verify the security_operations structure exists */

Re: Linux 2.6.30.2: does not boot

[Wolfgang Walter]

Am Montag, 20. Juli 2009 schrieb Greg KH:
> I'm announcing the release of the 2.6.30.2 kernel.  All users of the
> 2.6.30 kernel series are very strongly encouraged to upgrade.
>
> I'll also be replying to this message with a copy of the patch between
> 2.6.30.1 and 2.6.30.2
>
> The updated 2.6.30.y git tree can be found at:
>        
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.30.y.git and
> can be browsed at the normal kernel.org git web browser:
>        
> http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.30.y.git;a=summa
>ry
>
> thanks,
>
> greg k-h
>

Built 2.6.30.2 but it hangs when booting immediately after the message:

Booting the kernel.

I built it with gcc version 4.3.3 on debian/sid and used exactly the 
same .config as I used with 2.6.32.1  (ok, + "DEFAULT_MMAP_MIN_ADDR 4096" 
which didn't exist before).


Regards,
-- 
Wolfgang Walter
Studentenwerk München
Anstalt des öffentlichen Rechts
Leiter EDV
Leopoldstraße 15
80802 München
Tel: +49 89 38196 276
Fax: +49 89 38196 150
Email: wolfgang.walter@stwm.de
http://www.studentenwerk-muenchen.de/

Re: Linux 2.6.30.2: does not boot

[Kiko Piris]

[-- Attachment #1: Type: text/plain, Size: 783 bytes --]

On 20/07/2009 at 16:13 +0200, Wolfgang Walter wrote:

> Built 2.6.30.2 but it hangs when booting immediately after the message:
> Booting the kernel.

Same here, except that in my case it reboots instead of hanging.

> I built it with gcc version 4.3.3 on debian/sid and used exactly the 
> same .config as I used with 2.6.32.1  (ok, + "DEFAULT_MMAP_MIN_ADDR 4096" 
> which didn't exist before).

Same here (except that I used another value: 65536).

I’ve tested this on 3 out of 3 diferent boxes (attached is the config of
one of them, a thinkpad t60).

I don’t know how I could provide some more information, I’m unable to
debug a kernel, sorry.

But if you want me to test anything (patches or something like that),
please let me know. I realy would like to help.

-- 
Kiko

[-- Attachment #2: my.config --]
[-- Type: text/plain, Size: 26954 bytes --]

# grep -i ^config /usr/src/linux-2.6.30.2/.config > my.config
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_CLASSIC_RCU=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
CONFIG_NAMESPACES=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_FREEZER=y
CONFIG_TICK_ONESHOT=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_MPENTIUMM=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_HIGHMEM4G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_X86_PAT=y
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR_ALL=y
CONFIG_CC_STACKPROTECTOR=y
CONFIG_HZ_250=y
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_PHYSICAL_START=0x100000
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PM=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
CONFIG_PCCARD=m
CONFIG_PCMCIA_DEBUG=y
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_BINFMT_ELF=y
CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_FIB_HASH=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_NETFILTER=y
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=y
CONFIG_NF_CT_PROTO_SCTP=y
CONFIG_NF_CT_PROTO_UDPLITE=y
CONFIG_NF_CONNTRACK_AMANDA=y
CONFIG_NF_CONNTRACK_FTP=y
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=y
CONFIG_NF_CONNTRACK_NETBIOS_NS=y
CONFIG_NF_CONNTRACK_PPTP=y
CONFIG_NF_CONNTRACK_SANE=y
CONFIG_NF_CONNTRACK_SIP=y
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NF_CT_NETLINK=y
CONFIG_NETFILTER_TPROXY=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_CONNMARK=y
CONFIG_NETFILTER_XT_TARGET_DSCP=y
CONFIG_NETFILTER_XT_TARGET_HL=y
CONFIG_NETFILTER_XT_TARGET_LED=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NOTRACK=y
CONFIG_NETFILTER_XT_TARGET_RATEEST=y
CONFIG_NETFILTER_XT_TARGET_TPROXY=y
CONFIG_NETFILTER_XT_TARGET_TRACE=y
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=y
CONFIG_NETFILTER_XT_MATCH_CLUSTER=y
CONFIG_NETFILTER_XT_MATCH_COMMENT=y
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=y
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=y
CONFIG_NETFILTER_XT_MATCH_CONNMARK=y
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y
CONFIG_NETFILTER_XT_MATCH_DCCP=y
CONFIG_NETFILTER_XT_MATCH_DSCP=y
CONFIG_NETFILTER_XT_MATCH_ESP=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=y
CONFIG_NETFILTER_XT_MATCH_HL=y
CONFIG_NETFILTER_XT_MATCH_IPRANGE=y
CONFIG_NETFILTER_XT_MATCH_LENGTH=y
CONFIG_NETFILTER_XT_MATCH_LIMIT=y
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_OWNER=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
CONFIG_NETFILTER_XT_MATCH_QUOTA=y
CONFIG_NETFILTER_XT_MATCH_RATEEST=y
CONFIG_NETFILTER_XT_MATCH_REALM=y
CONFIG_NETFILTER_XT_MATCH_RECENT=y
CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT=y
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_SOCKET=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
CONFIG_NETFILTER_XT_MATCH_STATISTIC=y
CONFIG_NETFILTER_XT_MATCH_STRING=y
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_TIME=y
CONFIG_NETFILTER_XT_MATCH_U32=y
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_ADDRTYPE=y
CONFIG_IP_NF_MATCH_AH=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_SNMP_BASIC=y
CONFIG_NF_NAT_PROTO_GRE=y
CONFIG_NF_NAT_PROTO_UDPLITE=y
CONFIG_NF_NAT_PROTO_SCTP=y
CONFIG_NF_NAT_FTP=y
CONFIG_NF_NAT_IRC=y
CONFIG_NF_NAT_TFTP=y
CONFIG_NF_NAT_AMANDA=y
CONFIG_NF_NAT_PPTP=y
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=y
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_CLUSTERIP=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_TTL=y
CONFIG_IP_NF_RAW=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_LLC=m
CONFIG_PHONET=m
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_MULTIQ=y
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
CONFIG_NET_SCH_NETEM=y
CONFIG_NET_SCH_DRR=y
CONFIG_NET_SCH_INGRESS=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=y
CONFIG_NET_CLS_FLOW=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=y
CONFIG_NET_ACT_PEDIT=y
CONFIG_NET_ACT_SIMP=y
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_IRDA=m
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
CONFIG_IRTTY_SIR=m
CONFIG_NSC_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HCIBTUSB=m
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_LEDS=y
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_CONNECTOR=m
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_MISC_DEVICES=y
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_IDE_PROC_FS=y
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_IDEDMA_SFF=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_PROC_FS=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_WAIT_SCAN=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ATA=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
CONFIG_IEEE1394_SBP2_PHYS_DMA=y
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_BLOCK=m
CONFIG_I2O_PROC=m
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_MACVLAN=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_NETDEV_1000=y
CONFIG_E1000E=m
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_WLAN_80211=y
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
CONFIG_IWLAGN=m
CONFIG_IWL3945=m
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_USB_HSO=m
CONFIG_PPP=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_INPUT=y
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_GAMECON=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=m
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_PRINTER=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_MWAVE=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_I801=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_POWER_SUPPLY=y
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_HDAPS=m
CONFIG_THERMAL=y
CONFIG_SSB_POSSIBLE=y
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BT848=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_PWC_INPUT_EVDEV=y
CONFIG_DVB_CAPTURE_DRIVERS=y
CONFIG_DVB_USB=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_BT8XX=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_VES1820=m
CONFIG_DVB_STV0297=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_PLL=m
CONFIG_DVB_LNBP21=m
CONFIG_AGP=m
CONFIG_AGP_INTEL=m
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_VESA=y
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_BACKLIGHT=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_ISA=y
CONFIG_SND_PCI=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_USB=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
CONFIG_HIDRAW=y
CONFIG_USB_HID=m
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_TOPSEED=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_MEMSTICK=m
CONFIG_MSPRO_BLOCK=m
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_AUXDISPLAY=y
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
CONFIG_EXT4_FS=y
CONFIG_JBD=y
CONFIG_JBD2=y
CONFIG_REISERFS_FS=m
CONFIG_REISERFS_PROC_INFO=y
CONFIG_JFS_FS=m
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FUSE_FS=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_HPFS_FS=m
CONFIG_UFS_FS=m
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE=""
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CODA_FS=m
CONFIG_PARTITION_ADVANCED=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_LDM_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_UTF8=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FTRACE_SYSCALLS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_SECURITYFS=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_ZLIB=y
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_HW=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

Re: Linux 2.6.30.2: does not boot

[Greg KH]

On Mon, Jul 20, 2009 at 04:13:22PM +0200, Wolfgang Walter wrote:
> Am Montag, 20. Juli 2009 schrieb Greg KH:
> > I'm announcing the release of the 2.6.30.2 kernel.  All users of the
> > 2.6.30 kernel series are very strongly encouraged to upgrade.
> >
> > I'll also be replying to this message with a copy of the patch between
> > 2.6.30.1 and 2.6.30.2
> >
> > The updated 2.6.30.y git tree can be found at:
> >        
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-2.6.30.y.git and
> > can be browsed at the normal kernel.org git web browser:
> >        
> > http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.30.y.git;a=summa
> >ry
> >
> > thanks,
> >
> > greg k-h
> >
> 
> Built 2.6.30.2 but it hangs when booting immediately after the message:
> 
> Booting the kernel.
> 
> I built it with gcc version 4.3.3 on debian/sid and used exactly the 
> same .config as I used with 2.6.32.1  (ok, + "DEFAULT_MMAP_MIN_ADDR 4096" 
> which didn't exist before).

Can you do 'git bisect' to see which patch caused the problem?  It might
be the one, "Don't use '-fwrapv' compiler option: it's buggy in
gcc-4.1.x", but it would be good to figure it out for sure.

thanks,

greg k-h

Re: Linux 2.6.30.2: does not boot

[Damien Wyart]

> > Built 2.6.30.2 but it hangs when booting immediately after the message:

> > Booting the kernel.

> > I built it with gcc version 4.3.3 on debian/sid and used exactly the
> > same .config as I used with 2.6.32.1 (ok, + "DEFAULT_MMAP_MIN_ADDR
> > 4096" which didn't exist before).

* Greg KH <gregkh@suse.de> [2009-07-20 08:09]:
> Can you do 'git bisect' to see which patch caused the problem? It
> might be the one, "Don't use '-fwrapv' compiler option: it's buggy in
> gcc-4.1.x", but it would be good to figure it out for sure.

I am seeing a similar problem (no hang but an immediate reboot) on the
same distro. I tried to bisect but got no good kernel in the end.

To clarify things I recompiled again 2.6.30.1 with the orginial .config
and it also failed to boot (I was happy to have renamed it so the
working kernel was still available). I suspected a recent gcc 4.3
upgrade so downgraded gcc, but no luck, still getting the same problem.
So for now I am quite stuck, but there is clearly a bad problem
somewhere...

-- 
Damien Wyart

Re: Linux 2.6.30.2: does not boot

[Linus Torvalds]

On Mon, 20 Jul 2009, Damien Wyart wrote:
> 
> I am seeing a similar problem (no hang but an immediate reboot) on the
> same distro. I tried to bisect but got no good kernel in the end.
> 
> To clarify things I recompiled again 2.6.30.1 with the orginial .config
> and it also failed to boot (I was happy to have renamed it so the
> working kernel was still available). I suspected a recent gcc 4.3
> upgrade so downgraded gcc, but no luck, still getting the same problem.
> So for now I am quite stuck, but there is clearly a bad problem
> somewhere...

Hmm. So you _had_ a working self-compiled 2.6.30 kernel at some point?

One thing to look out for is that a compiler upgrade/downgrade will be 
invisible to the kernel build system, so if you downgrade the compiler and 
recompile, you may not actually recompile things at all.

The kernel build system _should_ notice when the build flags change, but 
gcc versions changing under it, not so much. So you might want to do a 
"make clean" to be sure.

And quite frankly, I'm not 100% sure even that will always do it.

Why? Many distro's use ccache, and so you may actually get a cached object 
file from a previous compile (with a previous compiler). Now, ccache is 
pretty good at noticing when things change, and I can well imagine that it 
also checks the compiler version (in addition to checking the hash of the 
preprocessed output and build flags etc), but I haven't double-checked.

So to make doubly sure that you really don't end up using cached object 
files, you might want to run "ccache -C".

			Linus

Re: Linux 2.6.30.2: does not boot

[Sam Ravnborg]

On Mon, Jul 20, 2009 at 11:16:17AM -0700, Linus Torvalds wrote:
> 
> 
> On Mon, 20 Jul 2009, Damien Wyart wrote:
> > 
> > I am seeing a similar problem (no hang but an immediate reboot) on the
> > same distro. I tried to bisect but got no good kernel in the end.
> > 
> > To clarify things I recompiled again 2.6.30.1 with the orginial .config
> > and it also failed to boot (I was happy to have renamed it so the
> > working kernel was still available). I suspected a recent gcc 4.3
> > upgrade so downgraded gcc, but no luck, still getting the same problem.
> > So for now I am quite stuck, but there is clearly a bad problem
> > somewhere...
> 
> Hmm. So you _had_ a working self-compiled 2.6.30 kernel at some point?
> 
> One thing to look out for is that a compiler upgrade/downgrade will be 
> invisible to the kernel build system, so if you downgrade the compiler and 
> recompile, you may not actually recompile things at all.
> 
> The kernel build system _should_ notice when the build flags change, but 
> gcc versions changing under it, not so much. So you might want to do a 
> "make clean" to be sure.

The build system does notice if the build flag changes - with the
excemption that it does not care about the ordering of the build flags.

gcc version changes are not detected as long as the name of gcc stays
the same - which it does in all normal cases.

	Sam

Re: Linux 2.6.30.2: does not boot

[Damien Wyart]

> > I am seeing a similar problem (no hang but an immediate reboot) on the
> > same distro. I tried to bisect but got no good kernel in the end.

> > To clarify things I recompiled again 2.6.30.1 with the orginial .config
> > and it also failed to boot (I was happy to have renamed it so the
> > working kernel was still available). I suspected a recent gcc 4.3
> > upgrade so downgraded gcc, but no luck, still getting the same problem.
> > So for now I am quite stuck, but there is clearly a bad problem
> > somewhere...

* Linus Torvalds <torvalds@linux-foundation.org> [2009-07-20 11:16]:
> Hmm. So you _had_ a working self-compiled 2.6.30 kernel at some point?

Yes, my case is very similar to the one described by Kiko Piris, and
I also think this is getting off topic.

> One thing to look out for is that a compiler upgrade/downgrade will be
> invisible to the kernel build system, so if you downgrade the compiler
> and recompile, you may not actually recompile things at all.

I tried the bisect with the same compiler and then for other tests
I recompiled from scratch each time on a tmpfs to make sure I was not
messing things up. On this machine, ccache is not used.

So I am suspecting a recent glibc or binutils upgrade (gcc downgrade did
not solve the problem) and even if some people noticed problems with
2.6.30.2, my issue seems different and only distro-related.

-- 
Damien Wyart

Re: Linux 2.6.30.2: does not boot

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 894 bytes --]

On Mon, 20 Jul 2009 11:16:17 -0700 (PDT) Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> Why? Many distro's use ccache, and so you may actually get a cached object 
> file from a previous compile (with a previous compiler). Now, ccache is 
> pretty good at noticing when things change, and I can well imagine that it 
> also checks the compiler version (in addition to checking the hash of the 
> preprocessed output and build flags etc), but I haven't double-checked.
> 
> So to make doubly sure that you really don't end up using cached object 
> files, you might want to run "ccache -C".

ccache includes, in the hash of the preprocessed file, "the real compilers
size and modification time", so will probably notice an upgrade or
downgrade of the compiler.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

Re: Linux 2.6.30.2: does not boot

[Linus Torvalds]

On Tue, 21 Jul 2009, Stephen Rothwell wrote:
> 
> ccache includes, in the hash of the preprocessed file, "the real compilers
> size and modification time", so will probably notice an upgrade or
> downgrade of the compiler.

Including something like the assembler? Apparently the problem here was 
binutils.

			Linus

Re: Linux 2.6.30.2: does not boot

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 639 bytes --]

Hi Linus,

On Mon, 20 Jul 2009 17:28:49 -0700 (PDT) Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Tue, 21 Jul 2009, Stephen Rothwell wrote:
> > 
> > ccache includes, in the hash of the preprocessed file, "the real compilers
> > size and modification time", so will probably notice an upgrade or
> > downgrade of the compiler.
> 
> Including something like the assembler? Apparently the problem here was 

No.

> binutils.

Yeah, difficult as ccache really doesn't know what assembler will be used.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

Re: Linux 2.6.30.2: does not boot

[Alejandro Riveira Fernández]

El Mon, 20 Jul 2009 20:03:33 +0200
Damien Wyart <damien.wyart@free.fr> escribió:

> > > Built 2.6.30.2 but it hangs when booting immediately after the message:
> 
> > > Booting the kernel.
> 
> > > I built it with gcc version 4.3.3 on debian/sid and used exactly the
> > > same .config as I used with 2.6.32.1 (ok, + "DEFAULT_MMAP_MIN_ADDR
> > > 4096" which didn't exist before).
> 
> * Greg KH <gregkh@suse.de> [2009-07-20 08:09]:
> > Can you do 'git bisect' to see which patch caused the problem? It
> > might be the one, "Don't use '-fwrapv' compiler option: it's buggy in
> > gcc-4.1.x", but it would be good to figure it out for sure.
> 
> I am seeing a similar problem (no hang but an immediate reboot) on the
> same distro. I tried to bisect but got no good kernel in the end.
> 
> To clarify things I recompiled again 2.6.30.1 with the orginial .config
> and it also failed to boot (I was happy to have renamed it so the
> working kernel was still available). I suspected a recent gcc 4.3
> upgrade so downgraded gcc, but no luck, still getting the same problem.
> So for now I am quite stuck, but there is clearly a bad problem
> somewhere...
> 
I did not have any probelm with the gcc shipped in ubuntu gcc (Ubuntu
4.3.3-5ubuntu4) 4.3.3 (64 bit jaunty 9.04)

All three 2.6.30 2.6.30.1 and .2 boot just fine (i carry a revert but i
doubt it changes things)

Re: Linux 2.6.30.2: does not boot

[Greg KH]

On Mon, Jul 20, 2009 at 09:23:18PM +0200, Alejandro Riveira Fernández wrote:
> El Mon, 20 Jul 2009 20:03:33 +0200
> Damien Wyart <damien.wyart@free.fr> escribió:
> 
> > > > Built 2.6.30.2 but it hangs when booting immediately after the message:
> > 
> > > > Booting the kernel.
> > 
> > > > I built it with gcc version 4.3.3 on debian/sid and used exactly the
> > > > same .config as I used with 2.6.32.1 (ok, + "DEFAULT_MMAP_MIN_ADDR
> > > > 4096" which didn't exist before).
> > 
> > * Greg KH <gregkh@suse.de> [2009-07-20 08:09]:
> > > Can you do 'git bisect' to see which patch caused the problem? It
> > > might be the one, "Don't use '-fwrapv' compiler option: it's buggy in
> > > gcc-4.1.x", but it would be good to figure it out for sure.
> > 
> > I am seeing a similar problem (no hang but an immediate reboot) on the
> > same distro. I tried to bisect but got no good kernel in the end.
> > 
> > To clarify things I recompiled again 2.6.30.1 with the orginial .config
> > and it also failed to boot (I was happy to have renamed it so the
> > working kernel was still available). I suspected a recent gcc 4.3
> > upgrade so downgraded gcc, but no luck, still getting the same problem.
> > So for now I am quite stuck, but there is clearly a bad problem
> > somewhere...
> > 
> I did not have any probelm with the gcc shipped in ubuntu gcc (Ubuntu
> 4.3.3-5ubuntu4) 4.3.3 (64 bit jaunty 9.04)
> 
> All three 2.6.30 2.6.30.1 and .2 boot just fine (i carry a revert but i
> doubt it changes things)

What revert do you find needed?

thanks,

greg k-h

Re: Linux 2.6.30.2: does not boot

[Alejandro Riveira Fernández]

El Mon, 20 Jul 2009 12:42:29 -0700
Greg KH <gregkh@suse.de> escribió:


> 
> What revert do you find needed?

 Full story here: 
http://bugzilla.kernel.org/show_bug.cgi?id=13362

 i'm reverting 7e0986c17f695952ce5d61ed793ce048ba90a661 for my own
use. The mail threath with Ivo seems to indicate that my hardware 
is weird so i do not think the problem will be resolved anytime soon
People lost interest i guess


> thanks,
> 
> greg k-h

Re: Linux 2.6.30.2: does not boot

[Greg KH]

On Mon, Jul 20, 2009 at 09:50:32PM +0200, Alejandro Riveira Fernández wrote:
> El Mon, 20 Jul 2009 12:42:29 -0700
> Greg KH <gregkh@suse.de> escribió:
> 
> 
> > 
> > What revert do you find needed?
> 
>  Full story here: 
> http://bugzilla.kernel.org/show_bug.cgi?id=13362
> 
>  i'm reverting 7e0986c17f695952ce5d61ed793ce048ba90a661 for my own
> use. The mail threath with Ivo seems to indicate that my hardware 
> is weird so i do not think the problem will be resolved anytime soon
> People lost interest i guess

Ah, ok, I was worried that I had missed something here :)

thanks for the info,

greg k-h

Re: Linux 2.6.30.2: does not boot

[Kiko Piris]

I guess this could be beginning to get off-topic on lkml.

Anyway, for what it’s worth…


On 20/07/2009 at 20:03 +0200, Damien Wyart wrote:

> I am seeing a similar problem (no hang but an immediate reboot) on the
> same distro.

Exactly the same than me.

> I suspected a recent gcc 4.3 upgrade so downgraded gcc, but no luck,
> still getting the same problem.  So for now I am quite stuck, but
> there is clearly a bad problem somewhere...

I compiled 2.6.30.1 some days ago:

| $ uname -a
| Linux rompetechos 2.6.30.1 #1 SMP Fri Jul 3 16:11:06 CEST 2009 i686 GNU/Linux

| $ zcat /usr/share/doc/linux-image-2.6.30.1/buildinfo.gz 
| binutils-2.19.1-1
| dpkg-1.15.3
| dpkg-dev-1.15.3
| gcc-4:4.3.3-9
| gcc-4.1-4.1.2-26
| gcc-4.1-base-4.1.2-26
| gcc-4.2-4.2.4-6
| gcc-4.2-base-4.2.4-6
| gcc-4.3-4.3.3-13
| gcc-4.3-base-4.3.3-13
| gcc-4.4-base-4.4.0-10
| libc6-2.9-18
| libc6-dev-2.9-18
| make-3.81-6
| perl-5.10.0-23
| this was built on a machine with the kernel:
| Linux rompetechos 2.6.29.5 #1 SMP Tue Jun 16 07:03:36 CEST 2009 i686 GNU/Linux
| using the compiler:
| gcc version 4.3.3 (Debian 4.3.3-13) 

I’m suspecting libc6 (it got upgraded this month a couple of times, now
it’s at version 2.9-21).

However, I’m not daring to downgrade it, I don’t have a box handy that I
can afford to break right now.

-- 
Kiko

Re: Linux 2.6.30.2: does not boot

[Linus Torvalds]

On Mon, 20 Jul 2009, Kiko Piris wrote:
> 
> On 20/07/2009 at 20:03 +0200, Damien Wyart wrote:
> 
> > I am seeing a similar problem (no hang but an immediate reboot) on the
> > same distro.
> 
> Exactly the same than me.
> 
> > I suspected a recent gcc 4.3 upgrade so downgraded gcc, but no luck,
> > still getting the same problem.  So for now I am quite stuck, but
> > there is clearly a bad problem somewhere...
> 
> I compiled 2.6.30.1 some days ago:
> 
> | $ uname -a
> | Linux rompetechos 2.6.30.1 #1 SMP Fri Jul 3 16:11:06 CEST 2009 i686 GNU/Linux

Just to clarify:

 - you literally have a _working_ 2.6.30.1 that you compiled yourself a 
   few days ago.

 - But when you try to compile that same kernel _now_, it fails with an 
   immediate reboot? And not just 2.6.30.2, but 2.6.30.1 does that too?

That certainly implies something else than just the -fwrapv vs 
-fno-strict-overflow thing.

But we may be looking at two different issues, so maybe your "unable to 
compile a working kernel" issue is different from the other reports.

So can anybody confirm that they can really compile (on the same machine, 
with the same compiler and libc, right after each other) 2.6.30.1 and it 
works, but 2.6.30.2 does not work?

And in particular, if you can do that, it would be really interesting to 
see your 'vmlinux' file with -fno-strict-overflow, and then the exact same 
compile but with the top-level Makefile changed to use -fwrapv instead 
(and please double-check that the -fwrapv kernel works, and the 
-fno-strict-overflow)

Sadly, the code generation differences you get between -fwrapv and 
-fno-strict-overflow are not trivial to sort out (I just tested it on my 
own kernel - obviously working in both cases), but I'd be willing to try. 
If somebody can really guarantee that the _only_ thing that changed was 
that one compiler flag (rather than a gcc/glibc update or anything else, 
which seems to be implicated here for some people).

		Linus

Re: Linux 2.6.30.2: does not boot

[Kiko Piris]

On 20/07/2009 at 12:50 -0700, Linus Torvalds wrote:

> Just to clarify:
> 
>  - you literally have a _working_ 2.6.30.1 that you compiled yourself a 
>    few days ago.

That’s correct.

>  - But when you try to compile that same kernel _now_, it fails with an 
>    immediate reboot? And not just 2.6.30.2, but 2.6.30.1 does that too?

Also correct.

> That certainly implies something else than just the -fwrapv vs 
> -fno-strict-overflow thing.

Yes, as Marcel Beister pointed, it resulted some binutils bug.
Downgrading the package produced a perfectly bootable 2.6.30.2.

> But we may be looking at two different issues, so maybe your "unable to 
> compile a working kernel" issue is different from the other reports.

Totally unrelated to other reports, and not a kernel bug, in fact.

Sorry if caused any confussion.

-- 
Kiko

Re: Linux 2.6.30.2: does not boot

[Linus Torvalds]

On Mon, 20 Jul 2009, Kiko Piris wrote:
> > Just to clarify:
> > 
> >  - you literally have a _working_ 2.6.30.1 that you compiled yourself a 
> >    few days ago.
> 
> That’s correct.
> 
> >  - But when you try to compile that same kernel _now_, it fails with an 
> >    immediate reboot? And not just 2.6.30.2, but 2.6.30.1 does that too?
> 
> Also correct.
> 
> > That certainly implies something else than just the -fwrapv vs 
> > -fno-strict-overflow thing.
> 
> Yes, as Marcel Beister pointed, it resulted some binutils bug.
> Downgrading the package produced a perfectly bootable 2.6.30.2.

Ok, so it's been narrowed down to binutils. Good.

> > But we may be looking at two different issues, so maybe your "unable to 
> > compile a working kernel" issue is different from the other reports.
> 
> Totally unrelated to other reports, and not a kernel bug, in fact.

Well, it's still not entirely clear that it's unrelated.

It seems that all the people involved are running Debian/sid, and I don't 
think we have any firm confirmation yet that it's the compiler flag for 
anybody. It was certainly the primary suspect, but maybe that was always 
just a red herring guess.

Wolfgang hasn't actually tried to compile without the -fno-strict-overflow 
flag yet, and maybe his hang is the same binutils bug.

Of course, maybe I missed some gcc flag confirmation that wasn't cc'd to 
me. So who knows..

		Linus

Re: Linux 2.6.30.2: does not boot

[Linus Torvalds]

On Mon, 20 Jul 2009, Linus Torvalds wrote:
> 
> Of course, maybe I missed some gcc flag confirmation that wasn't cc'd to 
> me. So who knows..

Never mind, There was the other thread about 2.6.27.7, and there it seems 
to have been confirmed. So yeah, we really do seem to have triggered two 
entirely separate bugs.

		Linus

Re: Linux 2.6.30.2: does not boot

[Kiko Piris]

On 20/07/2009 at 15:02 -0700, Linus Torvalds wrote:

> It seems that all the people involved are running Debian/sid, and I don't 
> think we have any firm confirmation yet that it's the compiler flag for 
> anybody. It was certainly the primary suspect, but maybe that was always 
> just a red herring guess.
>
> Wolfgang hasn't actually tried to compile without the -fno-strict-overflow 
> flag yet, and maybe his hang is the same binutils bug.

Just in case this information could be of any help:

I compiled 2.6.30.2 but reverting that commit
(a137802ee839ace40079bebde24cfb416f73208a, “Dont use -fwrapv compiler
option: its buggy in gcc-4.1.x”); on my sid box (with that supposedly
bad version of binutils), the box did not boot (same behaviour: reboot
just after lilo).

I also compiled 2.6.27.27 (it has that very same commit) on 3 different
servers at work (debian stable there). All of them booted without any
problem.

All of my boxes seem to be ok, but if I can do any additional test to
help, please let me know.

Thanks!

-- 
Kiko

Re: Linux 2.6.30.2: does not boot

[Wolfgang Walter]

On Tuesday 21 July 2009, Linus Torvalds wrote:
> 
> On Mon, 20 Jul 2009, Kiko Piris wrote:
> > > Just to clarify:
> > > 
> > >  - you literally have a _working_ 2.6.30.1 that you compiled yourself a 
> > >    few days ago.
> > 
> > That’s correct.
> > 
> > >  - But when you try to compile that same kernel _now_, it fails with an 
> > >    immediate reboot? And not just 2.6.30.2, but 2.6.30.1 does that too?
> > 
> > Also correct.
> > 
> > > That certainly implies something else than just the -fwrapv vs 
> > > -fno-strict-overflow thing.
> > 
> > Yes, as Marcel Beister pointed, it resulted some binutils bug.
> > Downgrading the package produced a perfectly bootable 2.6.30.2.
> 
> Ok, so it's been narrowed down to binutils. Good.
> 
> > > But we may be looking at two different issues, so maybe your "unable to 
> > > compile a working kernel" issue is different from the other reports.
> > 
> > Totally unrelated to other reports, and not a kernel bug, in fact.
> 
> Well, it's still not entirely clear that it's unrelated.
> 
> It seems that all the people involved are running Debian/sid, and I don't 
> think we have any firm confirmation yet that it's the compiler flag for 
> anybody. It was certainly the primary suspect, but maybe that was always 
> just a red herring guess.
> 
> Wolfgang hasn't actually tried to compile without the -fno-strict-overflow 
> flag yet, and maybe his hang is the same binutils bug.

Yes, it is.

I built with -fwrapv instead of  -fno-strict-overflow and without either, both 
fail to boot.

Downgrading binutils to those of debian/testing and the unmodified 2.6.30.2 
works.

So this seems to be indeed a problem with binutils in debian/sids.

Regards,
-- 
Wolfgang Walter
Studentenwerk München
Anstalt des öffentlichen Rechts
Leiter EDV
Leopoldstraße 15
80802 München
Tel: +49 89 38196-276
Fax: +49 89 38196-144
wolfgang.walter@stwm.de
http://www.studentenwerk-muenchen.de/

Re: Linux 2.6.30.2: does not boot

[Bastian Blank]

On Mon, Jul 20, 2009 at 03:02:36PM -0700, Linus Torvalds wrote:
> On Mon, 20 Jul 2009, Kiko Piris wrote:
> > Yes, as Marcel Beister pointed, it resulted some binutils bug.
> > Downgrading the package produced a perfectly bootable 2.6.30.2.
> Ok, so it's been narrowed down to binutils. Good.

Okay, I did some work and now got one working and one not working
kernel. The setup code it, except the payload size and the version
string, identical. Now to vmlinux.

First difference (1-vmlinux is the broken, 2-vmlinux is the working
version):
| 2-vmlinux:     file format elf32-i386
| 2-vmlinux
| architecture: i386, flags 0x00000113:
| HAS_RELOC, EXEC_P, HAS_SYMS, D_PAGED
vs.
| 1-vmlinux:     file format elf32-i386
| 1-vmlinux
| architecture: i386, flags 0x00000013:
| HAS_RELOC, EXEC_P, HAS_SYMS
The file lost its D_PAGED flag.

Next:
|  16 .init.rodata  00000394  c05057e0  005057e0  004067e0  2**4
|                   CONTENTS, ALLOC, LOAD, RELOC, DATA
|  17 .data.page_aligned 00000800  c0506000  00506000  00407000  2**5
|                   CONTENTS, ALLOC, LOAD, DATA
vs.
|  16 .init.rodata  00000394  c0506000  00506000  00407000  2**4
|                   CONTENTS, ALLOC, LOAD, RELOC, DATA
|  17 .data_nosave  00000c6c  c0506394  00506394  00407394  2**0
|                   ALLOC
|  18 .data.page_aligned 00000800  c0507000  00506394  00407394  2**5
|                   CONTENTS, ALLOC, LOAD, DATA
So suddenly there apears a .data_nosave with some content, but it is
marked the same then a bss section and not even properly aligned
according to the linker script.

The same sections of another working kernel, built with the new
binutils:
|  18 .init.rodata  000003bd  c040f4c0  0040f4c0  003104c0  2**2
|                   CONTENTS, ALLOC, LOAD, RELOC, DATA
|  19 .data_nosave  00001000  c0410000  00410000  00311000  2**2
|                   CONTENTS, ALLOC, LOAD, DATA
|  20 .data.page_aligned 00000800  c0411000  00411000  00312000  2**2
|                   CONTENTS, ALLOC, LOAD, DATA
The .data_nosave section is a real one here.

I would say, such holes won't survive the objcopy to create a binary and
all code is at the wrong location.

Bastian

-- 
Punishment becomes ineffective after a certain point.  Men become insensitive.
		-- Eneg, "Patterns of Force", stardate 2534.7

Re: current binutils trunk fails to build bootable kernel image for some configurations

[Alan Modra]

On Wed, Jul 22, 2009 at 01:04:57PM -0400, Matthias Klose wrote:
> this was reported as http://bugs.debian.org/537389, I currently don't 
> have much more information, besides that one of the Debian kernel 
> maintainers did identify
>
> 2009-07-11  Alan Modra  <amodra@bigpond.net.au>
>
>         * ldlang.c (insert_os_after): Don't tie assignments to non-alloc
>         output sections.
>
> this patch as the one causing the wrongly built kernel. However I don't 
> see this checkin mentioned on the ML.

The discussion happened on bug-binutils.
http://lists.gnu.org/archive/html/bug-binutils/2009-07/msg00067.html

> Bastian Blank did check that the 
> problem goes away with a binutils build from trunk and this patch 
> reverted. Some more analysis in http://lkml.org/lkml/2009/7/21/400

The biggest problem is that the kernel linker script doesn't mention
all sections, which means ld must choose a place for the unmentioned
sections (orphans).  Sometimes ld's placement isn't how a naive
programmer would expect.

In this case:

  . = ALIGN(PAGE_SIZE);
  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {

ld stuck an orphan section between the two statements.  Which meant
that the start of .data_nosave is not aligned (and since the end is
aligned by following statements, it means that .data_nosave also has
padding inserted).  It would be more robust to write:

  .data_nosave ALIGN(PAGE_SIZE) : AT(ADDR(.data_nosave) - LOAD_OFFSET) {

-- 
Alan Modra
Australia Development Lab, IBM

Re: current binutils trunk fails to build bootable kernel image for some configurations

[Sam Ravnborg]

On Thu, Jul 23, 2009 at 10:19:39AM +0930, Alan Modra wrote:
> On Wed, Jul 22, 2009 at 01:04:57PM -0400, Matthias Klose wrote:
> > this was reported as http://bugs.debian.org/537389, I currently don't 
> > have much more information, besides that one of the Debian kernel 
> > maintainers did identify
> >
> > 2009-07-11  Alan Modra  <amodra@bigpond.net.au>
> >
> >         * ldlang.c (insert_os_after): Don't tie assignments to non-alloc
> >         output sections.
> >
> > this patch as the one causing the wrongly built kernel. However I don't 
> > see this checkin mentioned on the ML.
> 
> The discussion happened on bug-binutils.
> http://lists.gnu.org/archive/html/bug-binutils/2009-07/msg00067.html
> 
> > Bastian Blank did check that the 
> > problem goes away with a binutils build from trunk and this patch 
> > reverted. Some more analysis in http://lkml.org/lkml/2009/7/21/400
> 
> The biggest problem is that the kernel linker script doesn't mention
> all sections, which means ld must choose a place for the unmentioned
> sections (orphans).  Sometimes ld's placement isn't how a naive
> programmer would expect.
> 
> In this case:
> 
>   . = ALIGN(PAGE_SIZE);
>   .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
> 
> ld stuck an orphan section between the two statements.  Which meant
> that the start of .data_nosave is not aligned (and since the end is
> aligned by following statements, it means that .data_nosave also has
> padding inserted).  It would be more robust to write:
> 
>   .data_nosave ALIGN(PAGE_SIZE) : AT(ADDR(.data_nosave) - LOAD_OFFSET) {

Do you recall when this started to be supported?
I think I tried this and it failed - but I may be wrong here.

Also - do there exist an option to tell what sections has not been
covered by a linker script?

	Sam

Re: current binutils trunk fails to build bootable kernel image for some configurations

[Alan Modra]

On Thu, Jul 23, 2009 at 07:05:22AM +0200, Sam Ravnborg wrote:
> On Thu, Jul 23, 2009 at 10:19:39AM +0930, Alan Modra wrote:
> >   .data_nosave ALIGN(PAGE_SIZE) : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
> 
> Do you recall when this started to be supported?

Forever.

> I think I tried this and it failed - but I may be wrong here.

I can think of at least two things that might cause my suggestion to
fail.
1) .data_nosave input sections may have alignments greater than
PAGE_SIZE, but we're setting the start address explicity.
2) following sections won't be aligned to PAGE_SIZE if .data_nosave is
empty.

Hmm, there is another option that I'd forgotten about.

  .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) ALIGN(PAGE_SIZE) {

This avoids (1) above since it only increases alignment.  Support for
this form of alignment was added 2005-09.

> Also - do there exist an option to tell what sections has not been
> covered by a linker script?

No.  You could put

  /DISCARD/ : { *(*) }

at the end of your script, then generate a map file.  Discarded
sections are reported.

-- 
Alan Modra
Australia Development Lab, IBM

Re: Linux 2.6.30.2: does not boot

[Marcel Beister]

> Built 2.6.30.2 but it hangs when booting immediately after the message:
> 
> Booting the kernel.
> 
> I built it with gcc version 4.3.3 on debian/sid and used exactly the 
> same .config as I used with 2.6.32.1  (ok, + "DEFAULT_MMAP_MIN_ADDR 4096" 
> which didn't exist before).
> 
> Regards,


Hi,

I had the same problem this weekend and I also checked various configurations,
but actually this is a problem with binutils_2.19.51.20090714-1.

I found the following bug report for binutils which exactly described my problem:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=537389

I downgraded binutils to the testing version (binutils_2.19.1-1) and the kernel
booted without any problems. I did this for 2 other machines and they all
rebooted with the sid version and they all booted fine with the testing version.

--
 Marcel

Re: Linux 2.6.30.2: does not boot

[Mario Vanoni]

Same on 2 machines,
black screen, main switch,

All values for
CONFIG_DEFAULT_MMAP_MIN_ADDR
between 0 and 655536 does not work,
recompiled for each value a kernel!

On a very similar machine it works!

Mario Vanoni