linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anton Vorontsov <avorontsov@ru.mvista.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Dooks <ben@fluff.org>,
	David Brownell <dbrownell@users.sourceforge.net>,
	David Woodhouse <dwmw2@infradead.org>,
	Grant Likely <grant.likely@secretlab.ca>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Jean Delvare <khali@linux-fr.org>,
	linux-mtd@lists.infradead.org, linux-kernel@vger.kernel.org,
	lm-sensors@lm-sensors.org, linuxppc-dev@ozlabs.org
Subject: [PATCH 5/6] hwmon: lm70: Convert to device table matching
Date: Fri, 31 Jul 2009 04:41:04 +0400	[thread overview]
Message-ID: <20090731004104.GE8371@oksana.dev.rtsoft.ru> (raw)
In-Reply-To: <20090731003957.GA23982@oksana.dev.rtsoft.ru>

This patch makes the code a little bit nicer, and shorter.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
---
 drivers/hwmon/lm70.c |   55 +++++++++++++++++--------------------------------
 1 files changed, 19 insertions(+), 36 deletions(-)

diff --git a/drivers/hwmon/lm70.c b/drivers/hwmon/lm70.c
index ae6204f..ab8a5d3 100644
--- a/drivers/hwmon/lm70.c
+++ b/drivers/hwmon/lm70.c
@@ -32,6 +32,7 @@
 #include <linux/sysfs.h>
 #include <linux/hwmon.h>
 #include <linux/mutex.h>
+#include <linux/mod_devicetable.h>
 #include <linux/spi/spi.h>
 
 
@@ -130,11 +131,20 @@ static DEVICE_ATTR(name, S_IRUGO, lm70_show_name, NULL);
 
 /*----------------------------------------------------------------------*/
 
-static int __devinit common_probe(struct spi_device *spi, int chip)
+static int __devinit lm70_probe(struct spi_device *spi)
 {
+	int chip = spi_get_device_id(spi)->driver_data;
 	struct lm70 *p_lm70;
 	int status;
 
+	/* signaling is SPI_MODE_0 for both LM70 and TMP121 */
+	if (spi->mode & (SPI_CPOL | SPI_CPHA))
+		return -EINVAL;
+
+	/* 3-wire link (shared SI/SO) for LM70 */
+	if (chip == LM70_CHIP_LM70 && !(spi->mode & SPI_3WIRE))
+		return -EINVAL;
+
 	/* NOTE:  we assume 8-bit words, and convert to 16 bits manually */
 
 	p_lm70 = kzalloc(sizeof *p_lm70, GFP_KERNEL);
@@ -170,24 +180,6 @@ out_dev_reg_failed:
 	return status;
 }
 
-static int __devinit lm70_probe(struct spi_device *spi)
-{
-	/* signaling is SPI_MODE_0 on a 3-wire link (shared SI/SO) */
-	if ((spi->mode & (SPI_CPOL | SPI_CPHA)) || !(spi->mode & SPI_3WIRE))
-		return -EINVAL;
-
-	return common_probe(spi, LM70_CHIP_LM70);
-}
-
-static int __devinit tmp121_probe(struct spi_device *spi)
-{
-	/* signaling is SPI_MODE_0 with only MISO connected */
-	if (spi->mode & (SPI_CPOL | SPI_CPHA))
-		return -EINVAL;
-
-	return common_probe(spi, LM70_CHIP_TMP121);
-}
-
 static int __devexit lm70_remove(struct spi_device *spi)
 {
 	struct lm70 *p_lm70 = dev_get_drvdata(&spi->dev);
@@ -201,41 +193,32 @@ static int __devexit lm70_remove(struct spi_device *spi)
 	return 0;
 }
 
-static struct spi_driver tmp121_driver = {
-	.driver = {
-		.name	= "tmp121",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= tmp121_probe,
-	.remove	= __devexit_p(lm70_remove),
+
+static const struct spi_device_id lm70_ids[] = {
+	{ "lm70",   LM70_CHIP_LM70 },
+	{ "tmp121", LM70_CHIP_TMP121 },
+	{ },
 };
+MODULE_DEVICE_TABLE(spi, lm70_ids);
 
 static struct spi_driver lm70_driver = {
 	.driver = {
 		.name	= "lm70",
 		.owner	= THIS_MODULE,
 	},
+	.id_table = lm70_ids,
 	.probe	= lm70_probe,
 	.remove	= __devexit_p(lm70_remove),
 };
 
 static int __init init_lm70(void)
 {
-	int ret = spi_register_driver(&lm70_driver);
-	if (ret)
-		return ret;
-
-	ret = spi_register_driver(&tmp121_driver);
-	if (ret)
-		spi_unregister_driver(&lm70_driver);
-
-	return ret;
+	return spi_register_driver(&lm70_driver);
 }
 
 static void __exit cleanup_lm70(void)
 {
 	spi_unregister_driver(&lm70_driver);
-	spi_unregister_driver(&tmp121_driver);
 }
 
 module_init(init_lm70);
-- 
1.6.3.3


  parent reply	other threads:[~2009-07-31  0:41 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-31  0:39 [PATCH v2 0/6] Device table matching for SPI subsystem Anton Vorontsov
2009-07-31  0:40 ` [PATCH 1/6] spi: Add support for device table matching Anton Vorontsov
2009-07-31  0:41 ` [PATCH 2/6] mtd: m25p80: Convert to " Anton Vorontsov
2009-08-04  2:54   ` David Brownell
2009-08-18 21:44     ` Anton Vorontsov
2009-08-18 21:46       ` [PATCH 1/2] mtd: m25p80: Rework probing/JEDEC code Anton Vorontsov
2010-06-12  6:27         ` Barry Song
2010-06-18 13:32           ` Anton Vorontsov
2010-06-21  2:42             ` [Uclinux-dist-devel] [PATCH 1/2] mtd: m25p80: Reworkprobing/JEDEC code Song, Barry
2010-06-21  3:27               ` Barry Song
2010-06-21  7:15                 ` Anton Vorontsov
2010-06-21  7:22                   ` Barry Song
2010-06-21  7:39                     ` Anton Vorontsov
2010-06-21 10:31                       ` Barry Song
2010-06-21 11:20                         ` Anton Vorontsov
2010-06-21 16:34                           ` Mike Frysinger
2010-06-21 16:47                             ` Anton Vorontsov
2010-06-21 16:54                               ` Mike Frysinger
2010-06-22  6:37                           ` Barry Song
2010-06-22 16:55                             ` Anton Vorontsov
2010-06-22 16:57                               ` [PATCH 1/2] mtd: m25p80: Fix false-positive probing Anton Vorontsov
2010-06-22 17:56                                 ` Mike Frysinger
2010-07-08  5:57                                 ` Artem Bityutskiy
2010-06-22 16:57                               ` [PATCH 2/2] mtd: m25p80: Make jedec_probe() return proper errno values Anton Vorontsov
2009-08-18 21:46       ` [PATCH 2/2] mtd: m25p80: Add support for CAT25xxx serial EEPROMs Anton Vorontsov
2009-09-22 23:25         ` Andrew Morton
2009-09-22 23:40           ` Anton Vorontsov
2009-09-22 21:17     ` [PATCH 2/6] mtd: m25p80: Convert to device table matching Andrew Morton
2009-09-22 23:01       ` Anton Vorontsov
2009-09-22 23:43         ` David Woodhouse
2009-09-22 23:52           ` Andrew Morton
2009-09-22 23:55           ` Anton Vorontsov
2009-09-23  0:02             ` Andrew Morton
2009-08-12 20:45   ` Michael Barkowski
2009-08-12 20:58     ` Anton Vorontsov
2009-08-12 20:58       ` Michael Barkowski
2009-07-31  0:41 ` [PATCH 3/6] of: Remove "stm,m25p40" alias Anton Vorontsov
2009-07-31  0:41 ` [PATCH 4/6] hwmon: adxx: Convert to device table matching Anton Vorontsov
2009-07-31  0:41 ` Anton Vorontsov [this message]
2009-07-31  0:41 ` [PATCH 6/6] spi: Prefix modalias with "spi:" Anton Vorontsov
2009-08-10  7:35 ` [PATCH v2 0/6] Device table matching for SPI subsystem Artem Bityutskiy
2009-08-18 21:44   ` Anton Vorontsov
2009-08-25 14:14     ` Artem Bityutskiy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090731004104.GE8371@oksana.dev.rtsoft.ru \
    --to=avorontsov@ru.mvista.com \
    --cc=akpm@linux-foundation.org \
    --cc=ben@fluff.org \
    --cc=benh@kernel.crashing.org \
    --cc=dbrownell@users.sourceforge.net \
    --cc=dwmw2@infradead.org \
    --cc=grant.likely@secretlab.ca \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=lm-sensors@lm-sensors.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).