* [PATCH 0/22] WM831x drivers
@ 2009-07-27 13:45 Mark Brown
2009-07-27 13:45 ` [PATCH 01/22] mfd: Allow multiple MFD cells with the same name Mark Brown
` (22 more replies)
0 siblings, 23 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz, Richard Purdie, David Brownell, Dmitry Torokhov,
Dmitry Torokhov, Jean Delvare, Anton Vorontsov, Liam Girdwood,
Alessandro Zummo, Wim Van Sebroeck
Cc: linux-kernel, lm-sensors, linux-input, rtc-linux
The following patch series adds initial support for the WM813x series of
PMICs.
Since these devices have functionality that crosses many subsystems the
patches cross many kernel trees. For clarity I'm presenting this
initial submission as a single series but I have endeavoured to split
things up so that the patches can be applied separately to the various
subsystems. In order to avoid merge issues as patches are applied the
platform data for the devices is included in the core patches.
Due to Kconfig and Makefile collisons I've also included the patch adding
hwmon support for the WM835x series of PMICs to the series. Other than
the build system updates there is no interdependence between those two
patches.
Mark Brown (22):
mfd: Allow multiple MFD cells with the same name
mfd: Initial core support for WM831x series devices
mfd: Add WM831x interrupt support
mfd: Add WM831x AUXADC support
mfd: Conditionally add WM831x backlight subdevice
mfd: Add basic WM831x OTP support
mfd: Export ISEL values from WM831x core
mfd: Hook WM831x into build system
backlight: Add WM831x backlight driver
gpio: Add WM831X GPIO driver
hwmon: Add WM835x PMIC hardware monitoring driver
hwmon: WM831x PMIC hardware monitoring driver
Input: Add support for the WM831x ON pin
leds: Add WM831x status LED driver
power_supply: Add driver for the PMU on WM831x PMICs
regulator: Add WM831x DC-DC buck convertor support
regulator: Add WM831x LDO support
regulator: Add WM831x EPE support
regulator: Add WM831x DC-DC boost convertor support
regulator: Add WM831x ISINK support
RTC: Add support for RTCs on Wolfson WM831x devices
[WATCHDOG] Add support for WM831x watchdog
Documentation/hwmon/wm831x | 37 +
Documentation/hwmon/wm8350 | 26 +
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/wm831x-gpio.c | 252 ++++++
drivers/hwmon/Kconfig | 21 +
drivers/hwmon/Makefile | 2 +
drivers/hwmon/wm831x-hwmon.c | 236 ++++++
drivers/hwmon/wm8350-hwmon.c | 151 ++++
drivers/input/misc/Kconfig | 10 +
drivers/input/misc/Makefile | 1 +
drivers/input/misc/wm831x-on.c | 163 ++++
drivers/leds/Kconfig | 7 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-wm831x-status.c | 341 ++++++++
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 2 +
drivers/mfd/mfd-core.c | 2 +-
drivers/mfd/wm831x-core.c | 1549 ++++++++++++++++++++++++++++++++++
drivers/mfd/wm831x-irq.c | 559 ++++++++++++
drivers/mfd/wm831x-otp.c | 83 ++
drivers/mfd/wm8350-core.c | 3 +
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/wm831x_power.c | 779 +++++++++++++++++
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 3 +
drivers/regulator/wm831x-dcdc.c | 862 +++++++++++++++++++
drivers/regulator/wm831x-isink.c | 260 ++++++
drivers/regulator/wm831x-ldo.c | 852 +++++++++++++++++++
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-wm831x.c | 538 ++++++++++++
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/wm831x_bl.c | 250 ++++++
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/wm831x_wdt.c | 441 ++++++++++
include/linux/mfd/core.h | 1 +
include/linux/mfd/wm831x/auxadc.h | 216 +++++
include/linux/mfd/wm831x/core.h | 289 +++++++
include/linux/mfd/wm831x/gpio.h | 55 ++
include/linux/mfd/wm831x/irq.h | 764 +++++++++++++++++
include/linux/mfd/wm831x/otp.h | 162 ++++
include/linux/mfd/wm831x/pdata.h | 113 +++
include/linux/mfd/wm831x/pmu.h | 189 +++++
include/linux/mfd/wm831x/regulator.h | 1218 ++++++++++++++++++++++++++
include/linux/mfd/wm831x/status.h | 34 +
include/linux/mfd/wm831x/watchdog.h | 52 ++
include/linux/mfd/wm8350/core.h | 6 +
51 files changed, 10589 insertions(+), 1 deletions(-)
create mode 100644 Documentation/hwmon/wm831x
create mode 100644 Documentation/hwmon/wm8350
create mode 100644 drivers/gpio/wm831x-gpio.c
create mode 100644 drivers/hwmon/wm831x-hwmon.c
create mode 100644 drivers/hwmon/wm8350-hwmon.c
create mode 100644 drivers/input/misc/wm831x-on.c
create mode 100644 drivers/leds/leds-wm831x-status.c
create mode 100644 drivers/mfd/wm831x-core.c
create mode 100644 drivers/mfd/wm831x-irq.c
create mode 100644 drivers/mfd/wm831x-otp.c
create mode 100644 drivers/power/wm831x_power.c
create mode 100644 drivers/regulator/wm831x-dcdc.c
create mode 100644 drivers/regulator/wm831x-isink.c
create mode 100644 drivers/regulator/wm831x-ldo.c
create mode 100644 drivers/rtc/rtc-wm831x.c
create mode 100644 drivers/video/backlight/wm831x_bl.c
create mode 100644 drivers/watchdog/wm831x_wdt.c
create mode 100644 include/linux/mfd/wm831x/auxadc.h
create mode 100644 include/linux/mfd/wm831x/core.h
create mode 100644 include/linux/mfd/wm831x/gpio.h
create mode 100644 include/linux/mfd/wm831x/irq.h
create mode 100644 include/linux/mfd/wm831x/otp.h
create mode 100644 include/linux/mfd/wm831x/pdata.h
create mode 100644 include/linux/mfd/wm831x/pmu.h
create mode 100644 include/linux/mfd/wm831x/regulator.h
create mode 100644 include/linux/mfd/wm831x/status.h
create mode 100644 include/linux/mfd/wm831x/watchdog.h
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH 01/22] mfd: Allow multiple MFD cells with the same name
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:45 ` [PATCH 02/22] mfd: Initial core support for WM831x series devices Mark Brown
` (21 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
Provide basic support for MFDs having multiple cells of a given
type with different IDs by adding an id to the mfd_cell structure
and then adding that to the id passed in to mfd_add_devices().
As it stands this approach requires that MFDs using this feature
deal with ensuring that there aren't any ID collisions resulting
from multiple MFDs of the same type being instantiated. This needs
to happen with the existing code too, but with this approach there
is a knock on effect on the IDs for non-duplicated devices.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/mfd-core.c | 2 +-
include/linux/mfd/core.h | 1 +
2 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c
index 54ddf37..ae15e49 100644
--- a/drivers/mfd/mfd-core.c
+++ b/drivers/mfd/mfd-core.c
@@ -25,7 +25,7 @@ static int mfd_add_device(struct device *parent, int id,
int ret = -ENOMEM;
int r;
- pdev = platform_device_alloc(cell->name, id);
+ pdev = platform_device_alloc(cell->name, id + cell->id);
if (!pdev)
goto fail_alloc;
diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h
index 49ef857..11d740b 100644
--- a/include/linux/mfd/core.h
+++ b/include/linux/mfd/core.h
@@ -23,6 +23,7 @@
*/
struct mfd_cell {
const char *name;
+ int id;
int (*enable)(struct platform_device *dev);
int (*disable)(struct platform_device *dev);
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 02/22] mfd: Initial core support for WM831x series devices
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
2009-07-27 13:45 ` [PATCH 01/22] mfd: Allow multiple MFD cells with the same name Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 15:00 ` [PATCH] mfd: Fix comment cut'n'paste in register lock code Mark Brown
2009-07-27 13:45 ` [PATCH 03/22] mfd: Add WM831x interrupt support Mark Brown
` (20 subsequent siblings)
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
The WM831x series of devices are register compatible processor power
management subsystems, providing regulator and power path management
facilities along with other services like watchdog, RTC and touch
panel controllers.
This patch adds very basic support, providing basic single register
I2C access, handling of the security key and registration of the
devices.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 1357 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/core.h | 247 +++++++
include/linux/mfd/wm831x/pdata.h | 107 +++
3 files changed, 1711 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/wm831x-core.c
create mode 100644 include/linux/mfd/wm831x/core.h
create mode 100644 include/linux/mfd/wm831x/pdata.h
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
new file mode 100644
index 0000000..cc1040c
--- /dev/null
+++ b/drivers/mfd/wm831x-core.c
@@ -0,0 +1,1357 @@
+/*
+ * wm831x-core.c -- Device access for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+enum wm831x_parent {
+ WM8310 = 0,
+ WM8311 = 1,
+ WM8312 = 2,
+};
+
+static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
+{
+ if (!wm831x->locked)
+ return 0;
+
+ switch (reg) {
+ case WM831X_WATCHDOG:
+ case WM831X_DC4_CONTROL:
+ case WM831X_ON_PIN_CONTROL:
+ case WM831X_BACKUP_CHARGER_CONTROL:
+ case WM831X_CHARGER_CONTROL_1:
+ case WM831X_CHARGER_CONTROL_2:
+ return 1;
+
+ default:
+ return 0;
+ }
+}
+
+/**
+ * wm831x_reg_unlock: Unlock user keyed registers
+ *
+ * The WM831x has a user key preventing writes to particularly
+ * critical registers. This function locks those registers,
+ * allowing writes to them.
+ */
+void wm831x_reg_lock(struct wm831x *wm831x)
+{
+ int ret;
+
+ ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0);
+ if (ret == 0) {
+ dev_vdbg(wm831x->dev, "Registers locked\n");
+
+ mutex_lock(&wm831x->io_lock);
+ WARN_ON(wm831x->locked);
+ wm831x->locked = 1;
+ mutex_unlock(&wm831x->io_lock);
+ } else {
+ dev_err(wm831x->dev, "Failed to lock registers: %d\n", ret);
+ }
+
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_lock);
+
+/**
+ * wm831x_reg_unlock: Unlock user keyed registers
+ *
+ * The WM831x has a user key preventing writes to particularly
+ * critical registers. This function locks those registers,
+ * preventing spurious writes.
+ */
+int wm831x_reg_unlock(struct wm831x *wm831x)
+{
+ int ret;
+
+ /* 0x9716 is the value required to unlock the registers */
+ ret = wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0x9716);
+ if (ret == 0) {
+ dev_vdbg(wm831x->dev, "Registers unlocked\n");
+
+ mutex_lock(&wm831x->io_lock);
+ WARN_ON(!wm831x->locked);
+ wm831x->locked = 0;
+ mutex_unlock(&wm831x->io_lock);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_unlock);
+
+static int wm831x_read(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *dest)
+{
+ int ret, i;
+ u16 *buf = dest;
+
+ BUG_ON(bytes % 2);
+ BUG_ON(bytes <= 0);
+
+ ret = wm831x->read_dev(wm831x, reg, bytes, dest);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < bytes / 2; i++) {
+ buf[i] = be16_to_cpu(buf[i]);
+
+ dev_vdbg(wm831x->dev, "Read %04x from R%d(0x%x)\n",
+ buf[i], reg + i, reg + i);
+ }
+
+ return 0;
+}
+
+/**
+ * wm831x_reg_read: Read a single WM831x register.
+ *
+ * @wm831x: Device to read from.
+ * @reg: Register to read.
+ */
+int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg)
+{
+ unsigned short val;
+ int ret;
+
+ mutex_lock(&wm831x->io_lock);
+
+ ret = wm831x_read(wm831x, reg, 2, &val);
+
+ mutex_unlock(&wm831x->io_lock);
+
+ if (ret < 0)
+ return ret;
+ else
+ return val;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_read);
+
+/**
+ * wm831x_bulk_read: Read multiple WM831x registers
+ *
+ * @wm831x: Device to read from
+ * @reg: First register
+ * @count: Number of registers
+ * @buf: Buffer to fill.
+ */
+int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
+ int count, u16 *buf)
+{
+ int ret;
+
+ mutex_lock(&wm831x->io_lock);
+
+ ret = wm831x_read(wm831x, reg, count * 2, buf);
+
+ mutex_unlock(&wm831x->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_bulk_read);
+
+static int wm831x_write(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *src)
+{
+ u16 *buf = src;
+ int i;
+
+ BUG_ON(bytes % 2);
+ BUG_ON(bytes <= 0);
+
+ for (i = 0; i < bytes / 2; i++) {
+ if (wm831x_reg_locked(wm831x, reg))
+ return -EPERM;
+
+ dev_vdbg(wm831x->dev, "Write %04x to R%d(0x%x)\n",
+ buf[i], reg + i, reg + i);
+
+ buf[i] = cpu_to_be16(buf[i]);
+ }
+
+ return wm831x->write_dev(wm831x, reg, bytes, src);
+}
+
+/**
+ * wm831x_reg_write: Write a single WM831x register.
+ *
+ * @wm831x: Device to write to.
+ * @reg: Register to write to.
+ * @val: Value to write.
+ */
+int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
+ unsigned short val)
+{
+ int ret;
+
+ mutex_lock(&wm831x->io_lock);
+
+ ret = wm831x_write(wm831x, reg, 2, &val);
+
+ mutex_unlock(&wm831x->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_reg_write);
+
+/**
+ * wm831x_set_bits: Set the value of a bitfield in a WM831x register
+ *
+ * @wm831x: Device to write to.
+ * @reg: Register to write to.
+ * @mask: Mask of bits to set.
+ * @val: Value to set (unshifted)
+ */
+int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
+ unsigned short mask, unsigned short val)
+{
+ int ret;
+ u16 r;
+
+ mutex_lock(&wm831x->io_lock);
+
+ ret = wm831x_read(wm831x, reg, 2, &r);
+ if (ret < 0)
+ goto out;
+
+ r &= ~mask;
+ r |= val;
+
+ ret = wm831x_write(wm831x, reg, 2, &r);
+
+out:
+ mutex_unlock(&wm831x->io_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_set_bits);
+
+static struct resource wm831x_dcdc1_resources[] = {
+ {
+ .start = WM831X_DC1_CONTROL_1,
+ .end = WM831X_DC1_DVS_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_DC1,
+ .end = WM831X_IRQ_UV_DC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "HC",
+ .start = WM831X_IRQ_HC_DC1,
+ .end = WM831X_IRQ_HC_DC1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct resource wm831x_dcdc2_resources[] = {
+ {
+ .start = WM831X_DC2_CONTROL_1,
+ .end = WM831X_DC2_DVS_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_DC2,
+ .end = WM831X_IRQ_UV_DC2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "HC",
+ .start = WM831X_IRQ_HC_DC2,
+ .end = WM831X_IRQ_HC_DC2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_dcdc3_resources[] = {
+ {
+ .start = WM831X_DC3_CONTROL_1,
+ .end = WM831X_DC3_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_DC3,
+ .end = WM831X_IRQ_UV_DC3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_dcdc4_resources[] = {
+ {
+ .start = WM831X_DC4_CONTROL,
+ .end = WM831X_DC4_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_DC4,
+ .end = WM831X_IRQ_UV_DC4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_gpio_resources[] = {
+ {
+ .start = WM831X_IRQ_GPIO_1,
+ .end = WM831X_IRQ_GPIO_16,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_isink1_resources[] = {
+ {
+ .start = WM831X_CURRENT_SINK_1,
+ .end = WM831X_CURRENT_SINK_1,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .start = WM831X_IRQ_CS1,
+ .end = WM831X_IRQ_CS1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_isink2_resources[] = {
+ {
+ .start = WM831X_CURRENT_SINK_2,
+ .end = WM831X_CURRENT_SINK_2,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .start = WM831X_IRQ_CS2,
+ .end = WM831X_IRQ_CS2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo1_resources[] = {
+ {
+ .start = WM831X_LDO1_CONTROL,
+ .end = WM831X_LDO1_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO1,
+ .end = WM831X_IRQ_UV_LDO1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo2_resources[] = {
+ {
+ .start = WM831X_LDO2_CONTROL,
+ .end = WM831X_LDO2_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO2,
+ .end = WM831X_IRQ_UV_LDO2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo3_resources[] = {
+ {
+ .start = WM831X_LDO3_CONTROL,
+ .end = WM831X_LDO3_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO3,
+ .end = WM831X_IRQ_UV_LDO3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo4_resources[] = {
+ {
+ .start = WM831X_LDO4_CONTROL,
+ .end = WM831X_LDO4_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO4,
+ .end = WM831X_IRQ_UV_LDO4,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo5_resources[] = {
+ {
+ .start = WM831X_LDO5_CONTROL,
+ .end = WM831X_LDO5_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO5,
+ .end = WM831X_IRQ_UV_LDO5,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo6_resources[] = {
+ {
+ .start = WM831X_LDO6_CONTROL,
+ .end = WM831X_LDO6_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO6,
+ .end = WM831X_IRQ_UV_LDO6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo7_resources[] = {
+ {
+ .start = WM831X_LDO7_CONTROL,
+ .end = WM831X_LDO7_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO7,
+ .end = WM831X_IRQ_UV_LDO7,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo8_resources[] = {
+ {
+ .start = WM831X_LDO8_CONTROL,
+ .end = WM831X_LDO8_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO8,
+ .end = WM831X_IRQ_UV_LDO8,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo9_resources[] = {
+ {
+ .start = WM831X_LDO9_CONTROL,
+ .end = WM831X_LDO9_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO9,
+ .end = WM831X_IRQ_UV_LDO9,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo10_resources[] = {
+ {
+ .start = WM831X_LDO10_CONTROL,
+ .end = WM831X_LDO10_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+ {
+ .name = "UV",
+ .start = WM831X_IRQ_UV_LDO10,
+ .end = WM831X_IRQ_UV_LDO10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_ldo11_resources[] = {
+ {
+ .start = WM831X_LDO11_ON_CONTROL,
+ .end = WM831X_LDO11_SLEEP_CONTROL,
+ .flags = IORESOURCE_IO,
+ },
+};
+
+static struct resource wm831x_on_resources[] = {
+ {
+ .start = WM831X_IRQ_ON,
+ .end = WM831X_IRQ_ON,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+
+static struct resource wm831x_power_resources[] = {
+ {
+ .name = "SYSLO",
+ .start = WM831X_IRQ_PPM_SYSLO,
+ .end = WM831X_IRQ_PPM_SYSLO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "PWR SRC",
+ .start = WM831X_IRQ_PPM_PWR_SRC,
+ .end = WM831X_IRQ_PPM_PWR_SRC,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "USB CURR",
+ .start = WM831X_IRQ_PPM_USB_CURR,
+ .end = WM831X_IRQ_PPM_USB_CURR,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "BATT HOT",
+ .start = WM831X_IRQ_CHG_BATT_HOT,
+ .end = WM831X_IRQ_CHG_BATT_HOT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "BATT COLD",
+ .start = WM831X_IRQ_CHG_BATT_COLD,
+ .end = WM831X_IRQ_CHG_BATT_COLD,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "BATT FAIL",
+ .start = WM831X_IRQ_CHG_BATT_FAIL,
+ .end = WM831X_IRQ_CHG_BATT_FAIL,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "OV",
+ .start = WM831X_IRQ_CHG_OV,
+ .end = WM831X_IRQ_CHG_OV,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "END",
+ .start = WM831X_IRQ_CHG_END,
+ .end = WM831X_IRQ_CHG_END,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "TO",
+ .start = WM831X_IRQ_CHG_TO,
+ .end = WM831X_IRQ_CHG_TO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "MODE",
+ .start = WM831X_IRQ_CHG_MODE,
+ .end = WM831X_IRQ_CHG_MODE,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "START",
+ .start = WM831X_IRQ_CHG_START,
+ .end = WM831X_IRQ_CHG_START,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_rtc_resources[] = {
+ {
+ .name = "PER",
+ .start = WM831X_IRQ_RTC_PER,
+ .end = WM831X_IRQ_RTC_PER,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "ALM",
+ .start = WM831X_IRQ_RTC_ALM,
+ .end = WM831X_IRQ_RTC_ALM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_status1_resources[] = {
+ {
+ .start = WM831X_STATUS_LED_1,
+ .end = WM831X_STATUS_LED_1,
+ .flags = IORESOURCE_IO,
+ },
+};
+
+static struct resource wm831x_status2_resources[] = {
+ {
+ .start = WM831X_STATUS_LED_2,
+ .end = WM831X_STATUS_LED_2,
+ .flags = IORESOURCE_IO,
+ },
+};
+
+static struct resource wm831x_touch_resources[] = {
+ {
+ .name = "TCHPD",
+ .start = WM831X_IRQ_TCHPD,
+ .end = WM831X_IRQ_TCHPD,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "TCHDATA",
+ .start = WM831X_IRQ_TCHDATA,
+ .end = WM831X_IRQ_TCHDATA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource wm831x_wdt_resources[] = {
+ {
+ .start = WM831X_IRQ_WDOG_TO,
+ .end = WM831X_IRQ_WDOG_TO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell wm8310_devs[] = {
+ {
+ .name = "wm831x-buckv",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+ .resources = wm831x_dcdc1_resources,
+ },
+ {
+ .name = "wm831x-buckv",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+ .resources = wm831x_dcdc2_resources,
+ },
+ {
+ .name = "wm831x-buckp",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+ .resources = wm831x_dcdc3_resources,
+ },
+ {
+ .name = "wm831x-boostp",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+ .resources = wm831x_dcdc4_resources,
+ },
+ {
+ .name = "wm831x-epe",
+ .id = 1,
+ },
+ {
+ .name = "wm831x-epe",
+ .id = 2,
+ },
+ {
+ .name = "wm831x-gpio",
+ .num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+ .resources = wm831x_gpio_resources,
+ },
+ {
+ .name = "wm831x-hwmon",
+ },
+ {
+ .name = "wm831x-isink",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+ .resources = wm831x_isink1_resources,
+ },
+ {
+ .name = "wm831x-isink",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+ .resources = wm831x_isink2_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+ .resources = wm831x_ldo1_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+ .resources = wm831x_ldo2_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+ .resources = wm831x_ldo3_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+ .resources = wm831x_ldo4_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+ .resources = wm831x_ldo5_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+ .resources = wm831x_ldo6_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+ .resources = wm831x_ldo7_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 8,
+ .num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+ .resources = wm831x_ldo8_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 9,
+ .num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+ .resources = wm831x_ldo9_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 10,
+ .num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+ .resources = wm831x_ldo10_resources,
+ },
+ {
+ .name = "wm831x-alive-ldo",
+ .id = 11,
+ .num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+ .resources = wm831x_ldo11_resources,
+ },
+ {
+ .name = "wm831x-on",
+ .num_resources = ARRAY_SIZE(wm831x_on_resources),
+ .resources = wm831x_on_resources,
+ },
+ {
+ .name = "wm831x-power",
+ .num_resources = ARRAY_SIZE(wm831x_power_resources),
+ .resources = wm831x_power_resources,
+ },
+ {
+ .name = "wm831x-rtc",
+ .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+ .resources = wm831x_rtc_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_status1_resources),
+ .resources = wm831x_status1_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_status2_resources),
+ .resources = wm831x_status2_resources,
+ },
+ {
+ .name = "wm831x-watchdog",
+ .num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+ .resources = wm831x_wdt_resources,
+ },
+};
+
+static struct mfd_cell wm8311_devs[] = {
+ {
+ .name = "wm831x-buckv",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+ .resources = wm831x_dcdc1_resources,
+ },
+ {
+ .name = "wm831x-buckv",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+ .resources = wm831x_dcdc2_resources,
+ },
+ {
+ .name = "wm831x-buckp",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+ .resources = wm831x_dcdc3_resources,
+ },
+ {
+ .name = "wm831x-boostp",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+ .resources = wm831x_dcdc4_resources,
+ },
+ {
+ .name = "wm831x-epe",
+ .id = 1,
+ },
+ {
+ .name = "wm831x-epe",
+ .id = 2,
+ },
+ {
+ .name = "wm831x-gpio",
+ .num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+ .resources = wm831x_gpio_resources,
+ },
+ {
+ .name = "wm831x-hwmon",
+ },
+ {
+ .name = "wm831x-isink",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+ .resources = wm831x_isink1_resources,
+ },
+ {
+ .name = "wm831x-isink",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+ .resources = wm831x_isink2_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+ .resources = wm831x_ldo1_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+ .resources = wm831x_ldo2_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+ .resources = wm831x_ldo3_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+ .resources = wm831x_ldo4_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+ .resources = wm831x_ldo5_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+ .resources = wm831x_ldo7_resources,
+ },
+ {
+ .name = "wm831x-alive-ldo",
+ .id = 11,
+ .num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+ .resources = wm831x_ldo11_resources,
+ },
+ {
+ .name = "wm831x-on",
+ .num_resources = ARRAY_SIZE(wm831x_on_resources),
+ .resources = wm831x_on_resources,
+ },
+ {
+ .name = "wm831x-power",
+ .num_resources = ARRAY_SIZE(wm831x_power_resources),
+ .resources = wm831x_power_resources,
+ },
+ {
+ .name = "wm831x-rtc",
+ .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+ .resources = wm831x_rtc_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_status1_resources),
+ .resources = wm831x_status1_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_status2_resources),
+ .resources = wm831x_status2_resources,
+ },
+ {
+ .name = "wm831x-touch",
+ .num_resources = ARRAY_SIZE(wm831x_touch_resources),
+ .resources = wm831x_touch_resources,
+ },
+ {
+ .name = "wm831x-watchdog",
+ .num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+ .resources = wm831x_wdt_resources,
+ },
+};
+
+static struct mfd_cell wm8312_devs[] = {
+ {
+ .name = "wm831x-buckv",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc1_resources),
+ .resources = wm831x_dcdc1_resources,
+ },
+ {
+ .name = "wm831x-buckv",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc2_resources),
+ .resources = wm831x_dcdc2_resources,
+ },
+ {
+ .name = "wm831x-buckp",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc3_resources),
+ .resources = wm831x_dcdc3_resources,
+ },
+ {
+ .name = "wm831x-boostp",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm831x_dcdc4_resources),
+ .resources = wm831x_dcdc4_resources,
+ },
+ {
+ .name = "wm831x-epe",
+ .id = 1,
+ },
+ {
+ .name = "wm831x-epe",
+ .id = 2,
+ },
+ {
+ .name = "wm831x-gpio",
+ .num_resources = ARRAY_SIZE(wm831x_gpio_resources),
+ .resources = wm831x_gpio_resources,
+ },
+ {
+ .name = "wm831x-hwmon",
+ },
+ {
+ .name = "wm831x-isink",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_isink1_resources),
+ .resources = wm831x_isink1_resources,
+ },
+ {
+ .name = "wm831x-isink",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_isink2_resources),
+ .resources = wm831x_isink2_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_ldo1_resources),
+ .resources = wm831x_ldo1_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_ldo2_resources),
+ .resources = wm831x_ldo2_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(wm831x_ldo3_resources),
+ .resources = wm831x_ldo3_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(wm831x_ldo4_resources),
+ .resources = wm831x_ldo4_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 5,
+ .num_resources = ARRAY_SIZE(wm831x_ldo5_resources),
+ .resources = wm831x_ldo5_resources,
+ },
+ {
+ .name = "wm831x-ldo",
+ .id = 6,
+ .num_resources = ARRAY_SIZE(wm831x_ldo6_resources),
+ .resources = wm831x_ldo6_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 7,
+ .num_resources = ARRAY_SIZE(wm831x_ldo7_resources),
+ .resources = wm831x_ldo7_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 8,
+ .num_resources = ARRAY_SIZE(wm831x_ldo8_resources),
+ .resources = wm831x_ldo8_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 9,
+ .num_resources = ARRAY_SIZE(wm831x_ldo9_resources),
+ .resources = wm831x_ldo9_resources,
+ },
+ {
+ .name = "wm831x-aldo",
+ .id = 10,
+ .num_resources = ARRAY_SIZE(wm831x_ldo10_resources),
+ .resources = wm831x_ldo10_resources,
+ },
+ {
+ .name = "wm831x-alive-ldo",
+ .id = 11,
+ .num_resources = ARRAY_SIZE(wm831x_ldo11_resources),
+ .resources = wm831x_ldo11_resources,
+ },
+ {
+ .name = "wm831x-on",
+ .num_resources = ARRAY_SIZE(wm831x_on_resources),
+ .resources = wm831x_on_resources,
+ },
+ {
+ .name = "wm831x-power",
+ .num_resources = ARRAY_SIZE(wm831x_power_resources),
+ .resources = wm831x_power_resources,
+ },
+ {
+ .name = "wm831x-rtc",
+ .num_resources = ARRAY_SIZE(wm831x_rtc_resources),
+ .resources = wm831x_rtc_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(wm831x_status1_resources),
+ .resources = wm831x_status1_resources,
+ },
+ {
+ .name = "wm831x-status",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(wm831x_status2_resources),
+ .resources = wm831x_status2_resources,
+ },
+ {
+ .name = "wm831x-touch",
+ .num_resources = ARRAY_SIZE(wm831x_touch_resources),
+ .resources = wm831x_touch_resources,
+ },
+ {
+ .name = "wm831x-watchdog",
+ .num_resources = ARRAY_SIZE(wm831x_wdt_resources),
+ .resources = wm831x_wdt_resources,
+ },
+};
+
+/*
+ * Instantiate the generic non-control parts of the device.
+ */
+static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
+{
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int rev;
+ enum wm831x_parent parent;
+ int ret;
+
+ mutex_init(&wm831x->io_lock);
+ mutex_init(&wm831x->key_lock);
+ dev_set_drvdata(wm831x->dev, wm831x);
+
+ ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret);
+ goto err;
+ }
+ if (ret != 0x6204) {
+ dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = wm831x_reg_read(wm831x, WM831X_REVISION);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read revision: %d\n", ret);
+ goto err;
+ }
+ rev = (ret & WM831X_PARENT_REV_MASK) >> WM831X_PARENT_REV_SHIFT;
+
+ ret = wm831x_reg_read(wm831x, WM831X_RESET_ID);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read device ID: %d\n", ret);
+ goto err;
+ }
+
+ switch (ret) {
+ case 0x8310:
+ parent = WM8310;
+ switch (rev) {
+ case 0:
+ dev_info(wm831x->dev, "WM8310 revision %c\n",
+ 'A' + rev);
+ break;
+ }
+ break;
+
+ case 0x8311:
+ parent = WM8311;
+ switch (rev) {
+ case 0:
+ dev_info(wm831x->dev, "WM8311 revision %c\n",
+ 'A' + rev);
+ break;
+ }
+ break;
+
+ case 0x8312:
+ parent = WM8312;
+ switch (rev) {
+ case 0:
+ dev_info(wm831x->dev, "WM8312 revision %c\n",
+ 'A' + rev);
+ break;
+ }
+ break;
+
+ case 0:
+ /* Some engineering samples do not have the ID set,
+ * rely on the device being registered correctly.
+ * This will need revisiting for future devices with
+ * multiple dies.
+ */
+ parent = id;
+ switch (rev) {
+ case 0:
+ dev_info(wm831x->dev, "WM831%d ES revision %c\n",
+ parent, 'A' + rev);
+ break;
+ }
+ break;
+
+ default:
+ dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* This will need revisiting in future but is OK for all
+ * current parts.
+ */
+ if (parent != id)
+ dev_warn(wm831x->dev, "Device was registered as a WM831%lu\n",
+ id);
+
+ /* Bootstrap the user key */
+ ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read security key: %d\n", ret);
+ goto err;
+ }
+ if (ret != 0) {
+ dev_warn(wm831x->dev, "Security key had non-zero value %x\n",
+ ret);
+ wm831x_reg_write(wm831x, WM831X_SECURITY_KEY, 0);
+ }
+ wm831x->locked = 1;
+
+ if (pdata && pdata->pre_init) {
+ ret = pdata->pre_init(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "pre_init() failed: %d\n", ret);
+ goto err;
+ }
+ }
+
+ /* The core device is up, instantiate the subdevices. */
+ switch (parent) {
+ case WM8310:
+ ret = mfd_add_devices(wm831x->dev, -1,
+ wm8310_devs, ARRAY_SIZE(wm8310_devs),
+ NULL, 0);
+ break;
+
+ case WM8311:
+ ret = mfd_add_devices(wm831x->dev, -1,
+ wm8311_devs, ARRAY_SIZE(wm8311_devs),
+ NULL, 0);
+ break;
+
+ case WM8312:
+ ret = mfd_add_devices(wm831x->dev, -1,
+ wm8312_devs, ARRAY_SIZE(wm8312_devs),
+ NULL, 0);
+ break;
+
+ default:
+ /* If this happens the bus probe function is buggy */
+ BUG();
+ }
+
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to add children\n");
+ goto err;
+ }
+
+ if (pdata && pdata->post_init) {
+ ret = pdata->post_init(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "post_init() failed: %d\n", ret);
+ goto err;
+ }
+ }
+
+ return 0;
+
+err:
+ mfd_remove_devices(wm831x->dev);
+ kfree(wm831x);
+ return ret;
+}
+
+static void wm831x_device_exit(struct wm831x *wm831x)
+{
+ mfd_remove_devices(wm831x->dev);
+ kfree(wm831x);
+}
+
+static int wm831x_i2c_read_device(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *dest)
+{
+ struct i2c_client *i2c = wm831x->control_data;
+ int ret;
+ u16 r = cpu_to_be16(reg);
+
+ ret = i2c_master_send(i2c, (unsigned char *)&r, 2);
+ if (ret < 0)
+ return ret;
+ if (ret != 2)
+ return -EIO;
+
+ ret = i2c_master_recv(i2c, dest, bytes);
+ if (ret < 0)
+ return ret;
+ if (ret != bytes)
+ return -EIO;
+ return 0;
+}
+
+/* Currently we allocate the write buffer on the stack; this is OK for
+ * small writes - if we need to do large writes this will need to be
+ * revised.
+ */
+static int wm831x_i2c_write_device(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *src)
+{
+ struct i2c_client *i2c = wm831x->control_data;
+ unsigned char msg[bytes + 2];
+ int ret;
+
+ reg = cpu_to_be16(reg);
+ memcpy(&msg[0], ®, 2);
+ memcpy(&msg[2], src, bytes);
+
+ ret = i2c_master_send(i2c, msg, bytes + 2);
+ if (ret < 0)
+ return ret;
+ if (ret < bytes + 2)
+ return -EIO;
+
+ return 0;
+}
+
+static int wm831x_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct wm831x *wm831x;
+
+ wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL);
+ if (wm831x == NULL) {
+ kfree(i2c);
+ return -ENOMEM;
+ }
+
+ i2c_set_clientdata(i2c, wm831x);
+ wm831x->dev = &i2c->dev;
+ wm831x->control_data = i2c;
+ wm831x->read_dev = wm831x_i2c_read_device;
+ wm831x->write_dev = wm831x_i2c_write_device;
+
+ return wm831x_device_init(wm831x, id->driver_data, i2c->irq);
+}
+
+static int wm831x_i2c_remove(struct i2c_client *i2c)
+{
+ struct wm831x *wm831x = i2c_get_clientdata(i2c);
+
+ wm831x_device_exit(wm831x);
+
+ return 0;
+}
+
+static const struct i2c_device_id wm831x_i2c_id[] = {
+ { "wm8310", WM8310 },
+ { "wm8311", WM8311 },
+ { "wm8312", WM8312 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
+
+
+static struct i2c_driver wm831x_i2c_driver = {
+ .driver = {
+ .name = "wm831x",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_i2c_probe,
+ .remove = wm831x_i2c_remove,
+ .id_table = wm831x_i2c_id,
+};
+
+static int __init wm831x_i2c_init(void)
+{
+ int ret;
+
+ ret = i2c_add_driver(&wm831x_i2c_driver);
+ if (ret != 0)
+ pr_err("Failed to register wm831x I2C driver: %d\n", ret);
+
+ return ret;
+}
+subsys_initcall(wm831x_i2c_init);
+
+static void __exit wm831x_i2c_exit(void)
+{
+ i2c_del_driver(&wm831x_i2c_driver);
+}
+module_exit(wm831x_i2c_exit);
+
+MODULE_DESCRIPTION("I2C support for the WM831X AudioPlus PMIC");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown");
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
new file mode 100644
index 0000000..d90e693
--- /dev/null
+++ b/include/linux/mfd/wm831x/core.h
@@ -0,0 +1,247 @@
+/*
+ * include/linux/mfd/wm831x/core.h -- Core interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_CORE_H__
+#define __MFD_WM831X_CORE_H__
+
+/*
+ * Register values.
+ */
+#define WM831X_RESET_ID 0x00
+#define WM831X_REVISION 0x01
+#define WM831X_PARENT_ID 0x4000
+#define WM831X_SYSVDD_CONTROL 0x4001
+#define WM831X_THERMAL_MONITORING 0x4002
+#define WM831X_POWER_STATE 0x4003
+#define WM831X_WATCHDOG 0x4004
+#define WM831X_ON_PIN_CONTROL 0x4005
+#define WM831X_RESET_CONTROL 0x4006
+#define WM831X_CONTROL_INTERFACE 0x4007
+#define WM831X_SECURITY_KEY 0x4008
+#define WM831X_SOFTWARE_SCRATCH 0x4009
+#define WM831X_OTP_CONTROL 0x400A
+#define WM831X_GPIO_LEVEL 0x400C
+#define WM831X_SYSTEM_STATUS 0x400D
+#define WM831X_ON_SOURCE 0x400E
+#define WM831X_OFF_SOURCE 0x400F
+#define WM831X_SYSTEM_INTERRUPTS 0x4010
+#define WM831X_INTERRUPT_STATUS_1 0x4011
+#define WM831X_INTERRUPT_STATUS_2 0x4012
+#define WM831X_INTERRUPT_STATUS_3 0x4013
+#define WM831X_INTERRUPT_STATUS_4 0x4014
+#define WM831X_INTERRUPT_STATUS_5 0x4015
+#define WM831X_IRQ_CONFIG 0x4017
+#define WM831X_SYSTEM_INTERRUPTS_MASK 0x4018
+#define WM831X_INTERRUPT_STATUS_1_MASK 0x4019
+#define WM831X_INTERRUPT_STATUS_2_MASK 0x401A
+#define WM831X_INTERRUPT_STATUS_3_MASK 0x401B
+#define WM831X_INTERRUPT_STATUS_4_MASK 0x401C
+#define WM831X_INTERRUPT_STATUS_5_MASK 0x401D
+#define WM831X_RTC_WRITE_COUNTER 0x4020
+#define WM831X_RTC_TIME_1 0x4021
+#define WM831X_RTC_TIME_2 0x4022
+#define WM831X_RTC_ALARM_1 0x4023
+#define WM831X_RTC_ALARM_2 0x4024
+#define WM831X_RTC_CONTROL 0x4025
+#define WM831X_RTC_TRIM 0x4026
+#define WM831X_TOUCH_CONTROL_1 0x4028
+#define WM831X_TOUCH_CONTROL_2 0x4029
+#define WM831X_TOUCH_DATA_X 0x402A
+#define WM831X_TOUCH_DATA_Y 0x402B
+#define WM831X_TOUCH_DATA_Z 0x402C
+#define WM831X_AUXADC_DATA 0x402D
+#define WM831X_AUXADC_CONTROL 0x402E
+#define WM831X_AUXADC_SOURCE 0x402F
+#define WM831X_COMPARATOR_CONTROL 0x4030
+#define WM831X_COMPARATOR_1 0x4031
+#define WM831X_COMPARATOR_2 0x4032
+#define WM831X_COMPARATOR_3 0x4033
+#define WM831X_COMPARATOR_4 0x4034
+#define WM831X_GPIO1_CONTROL 0x4038
+#define WM831X_GPIO2_CONTROL 0x4039
+#define WM831X_GPIO3_CONTROL 0x403A
+#define WM831X_GPIO4_CONTROL 0x403B
+#define WM831X_GPIO5_CONTROL 0x403C
+#define WM831X_GPIO6_CONTROL 0x403D
+#define WM831X_GPIO7_CONTROL 0x403E
+#define WM831X_GPIO8_CONTROL 0x403F
+#define WM831X_GPIO9_CONTROL 0x4040
+#define WM831X_GPIO10_CONTROL 0x4041
+#define WM831X_GPIO11_CONTROL 0x4042
+#define WM831X_GPIO12_CONTROL 0x4043
+#define WM831X_GPIO13_CONTROL 0x4044
+#define WM831X_GPIO14_CONTROL 0x4045
+#define WM831X_GPIO15_CONTROL 0x4046
+#define WM831X_GPIO16_CONTROL 0x4047
+#define WM831X_CHARGER_CONTROL_1 0x4048
+#define WM831X_CHARGER_CONTROL_2 0x4049
+#define WM831X_CHARGER_STATUS 0x404A
+#define WM831X_BACKUP_CHARGER_CONTROL 0x404B
+#define WM831X_STATUS_LED_1 0x404C
+#define WM831X_STATUS_LED_2 0x404D
+#define WM831X_CURRENT_SINK_1 0x404E
+#define WM831X_CURRENT_SINK_2 0x404F
+#define WM831X_DCDC_ENABLE 0x4050
+#define WM831X_LDO_ENABLE 0x4051
+#define WM831X_DCDC_STATUS 0x4052
+#define WM831X_LDO_STATUS 0x4053
+#define WM831X_DCDC_UV_STATUS 0x4054
+#define WM831X_LDO_UV_STATUS 0x4055
+#define WM831X_DC1_CONTROL_1 0x4056
+#define WM831X_DC1_CONTROL_2 0x4057
+#define WM831X_DC1_ON_CONFIG 0x4058
+#define WM831X_DC1_SLEEP_CONTROL 0x4059
+#define WM831X_DC1_DVS_CONTROL 0x405A
+#define WM831X_DC2_CONTROL_1 0x405B
+#define WM831X_DC2_CONTROL_2 0x405C
+#define WM831X_DC2_ON_CONFIG 0x405D
+#define WM831X_DC2_SLEEP_CONTROL 0x405E
+#define WM831X_DC2_DVS_CONTROL 0x405F
+#define WM831X_DC3_CONTROL_1 0x4060
+#define WM831X_DC3_CONTROL_2 0x4061
+#define WM831X_DC3_ON_CONFIG 0x4062
+#define WM831X_DC3_SLEEP_CONTROL 0x4063
+#define WM831X_DC4_CONTROL 0x4064
+#define WM831X_DC4_SLEEP_CONTROL 0x4065
+#define WM831X_EPE1_CONTROL 0x4066
+#define WM831X_EPE2_CONTROL 0x4067
+#define WM831X_LDO1_CONTROL 0x4068
+#define WM831X_LDO1_ON_CONTROL 0x4069
+#define WM831X_LDO1_SLEEP_CONTROL 0x406A
+#define WM831X_LDO2_CONTROL 0x406B
+#define WM831X_LDO2_ON_CONTROL 0x406C
+#define WM831X_LDO2_SLEEP_CONTROL 0x406D
+#define WM831X_LDO3_CONTROL 0x406E
+#define WM831X_LDO3_ON_CONTROL 0x406F
+#define WM831X_LDO3_SLEEP_CONTROL 0x4070
+#define WM831X_LDO4_CONTROL 0x4071
+#define WM831X_LDO4_ON_CONTROL 0x4072
+#define WM831X_LDO4_SLEEP_CONTROL 0x4073
+#define WM831X_LDO5_CONTROL 0x4074
+#define WM831X_LDO5_ON_CONTROL 0x4075
+#define WM831X_LDO5_SLEEP_CONTROL 0x4076
+#define WM831X_LDO6_CONTROL 0x4077
+#define WM831X_LDO6_ON_CONTROL 0x4078
+#define WM831X_LDO6_SLEEP_CONTROL 0x4079
+#define WM831X_LDO7_CONTROL 0x407A
+#define WM831X_LDO7_ON_CONTROL 0x407B
+#define WM831X_LDO7_SLEEP_CONTROL 0x407C
+#define WM831X_LDO8_CONTROL 0x407D
+#define WM831X_LDO8_ON_CONTROL 0x407E
+#define WM831X_LDO8_SLEEP_CONTROL 0x407F
+#define WM831X_LDO9_CONTROL 0x4080
+#define WM831X_LDO9_ON_CONTROL 0x4081
+#define WM831X_LDO9_SLEEP_CONTROL 0x4082
+#define WM831X_LDO10_CONTROL 0x4083
+#define WM831X_LDO10_ON_CONTROL 0x4084
+#define WM831X_LDO10_SLEEP_CONTROL 0x4085
+#define WM831X_LDO11_ON_CONTROL 0x4087
+#define WM831X_LDO11_SLEEP_CONTROL 0x4088
+#define WM831X_POWER_GOOD_SOURCE_1 0x408E
+#define WM831X_POWER_GOOD_SOURCE_2 0x408F
+#define WM831X_CLOCK_CONTROL_1 0x4090
+#define WM831X_CLOCK_CONTROL_2 0x4091
+#define WM831X_FLL_CONTROL_1 0x4092
+#define WM831X_FLL_CONTROL_2 0x4093
+#define WM831X_FLL_CONTROL_3 0x4094
+#define WM831X_FLL_CONTROL_4 0x4095
+#define WM831X_FLL_CONTROL_5 0x4096
+#define WM831X_UNIQUE_ID_1 0x7800
+#define WM831X_UNIQUE_ID_2 0x7801
+#define WM831X_UNIQUE_ID_3 0x7802
+#define WM831X_UNIQUE_ID_4 0x7803
+#define WM831X_UNIQUE_ID_5 0x7804
+#define WM831X_UNIQUE_ID_6 0x7805
+#define WM831X_UNIQUE_ID_7 0x7806
+#define WM831X_UNIQUE_ID_8 0x7807
+#define WM831X_FACTORY_OTP_ID 0x7808
+#define WM831X_FACTORY_OTP_1 0x7809
+#define WM831X_FACTORY_OTP_2 0x780A
+#define WM831X_FACTORY_OTP_3 0x780B
+#define WM831X_FACTORY_OTP_4 0x780C
+#define WM831X_FACTORY_OTP_5 0x780D
+#define WM831X_CUSTOMER_OTP_ID 0x7810
+#define WM831X_DC1_OTP_CONTROL 0x7811
+#define WM831X_DC2_OTP_CONTROL 0x7812
+#define WM831X_DC3_OTP_CONTROL 0x7813
+#define WM831X_LDO1_2_OTP_CONTROL 0x7814
+#define WM831X_LDO3_4_OTP_CONTROL 0x7815
+#define WM831X_LDO5_6_OTP_CONTROL 0x7816
+#define WM831X_LDO7_8_OTP_CONTROL 0x7817
+#define WM831X_LDO9_10_OTP_CONTROL 0x7818
+#define WM831X_LDO11_EPE_CONTROL 0x7819
+#define WM831X_GPIO1_OTP_CONTROL 0x781A
+#define WM831X_GPIO2_OTP_CONTROL 0x781B
+#define WM831X_GPIO3_OTP_CONTROL 0x781C
+#define WM831X_GPIO4_OTP_CONTROL 0x781D
+#define WM831X_GPIO5_OTP_CONTROL 0x781E
+#define WM831X_GPIO6_OTP_CONTROL 0x781F
+#define WM831X_DBE_CHECK_DATA 0x7827
+
+/*
+ * R0 (0x00) - Reset ID
+ */
+#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */
+
+/*
+ * R1 (0x01) - Revision
+ */
+#define WM831X_PARENT_REV_MASK 0xFF00 /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_SHIFT 8 /* PARENT_REV - [15:8] */
+#define WM831X_PARENT_REV_WIDTH 8 /* PARENT_REV - [15:8] */
+#define WM831X_CHILD_REV_MASK 0x00FF /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_SHIFT 0 /* CHILD_REV - [7:0] */
+#define WM831X_CHILD_REV_WIDTH 8 /* CHILD_REV - [7:0] */
+
+/*
+ * R16384 (0x4000) - Parent ID
+ */
+#define WM831X_PARENT_ID_MASK 0xFFFF /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */
+#define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */
+
+struct wm831x {
+ struct mutex io_lock;
+
+ struct device *dev;
+ int (*read_dev)(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *dest);
+ int (*write_dev)(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *src);
+
+ void *control_data;
+
+ /* The WM831x has a security key blocking access to certain
+ * registers. The mutex is taken by the accessors for locking
+ * and unlocking the security key, locked is used to fail
+ * writes if the lock is held.
+ */
+ struct mutex key_lock;
+ unsigned int locked:1;
+};
+
+/* Device I/O API */
+int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg);
+int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg,
+ unsigned short val);
+void wm831x_reg_lock(struct wm831x *wm831x);
+int wm831x_reg_unlock(struct wm831x *wm831x);
+int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
+ unsigned short mask, unsigned short val);
+int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
+ int count, u16 *buf);
+
+#endif
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
new file mode 100644
index 0000000..571e601
--- /dev/null
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -0,0 +1,107 @@
+/*
+ * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PDATA_H__
+#define __MFD_WM831X_PDATA_H__
+
+struct wm831x;
+struct regulator_init_data;
+
+struct wm831x_backup_pdata {
+ int charger_enable;
+ int no_constant_voltage; /** Disable constant voltage charging */
+ int vlim; /** Voltage limit in milivolts */
+ int ilim; /** Current limit in microamps */
+};
+
+struct wm831x_battery_pdata {
+ int enable; /** Enable charging */
+ int fast_enable; /** Enable fast charging */
+ int off_mask; /** Mask OFF while charging */
+ int trickle_ilim; /** Trickle charge current limit, in mA */
+ int vsel; /** Target voltage, in mV */
+ int eoc_iterm; /** End of trickle charge current, in mA */
+ int fast_ilim; /** Fast charge current limit, in mA */
+ int timeout; /** Charge cycle timeout, in minutes */
+};
+
+/* Sources for status LED configuration. Values are register values
+ * plus 1 to allow for a zero default for preserve.
+ */
+enum wm831x_status_src {
+ WM831X_STATUS_PRESERVE = 0, /* Keep the current hardware setting */
+ WM831X_STATUS_OTP = 1,
+ WM831X_STATUS_POWER = 2,
+ WM831X_STATUS_CHARGER = 3,
+ WM831X_STATUS_MANUAL = 4,
+};
+
+struct wm831x_status_pdata {
+ enum wm831x_status_src default_src;
+ const char *name;
+ const char *default_trigger;
+};
+
+struct wm831x_touch_pdata {
+ int fivewire; /** 1 for five wire mode, 0 for 4 wire */
+ int isel; /** Current for pen down (uA) */
+ int rpu; /** Pen down sensitivity resistor divider */
+ int pressure; /** Report pressure (boolean) */
+ int data_irq; /** Touch data ready IRQ */
+};
+
+enum wm831x_watchdog_action {
+ WM831X_WDOG_NONE = 0,
+ WM831X_WDOG_INTERRUPT = 1,
+ WM831X_WDOG_RESET = 2,
+ WM831X_WDOG_WAKE = 3,
+};
+
+struct wm831x_watchdog_pdata {
+ enum wm831x_watchdog_action primary, secondary;
+ int update_gpio;
+ unsigned int software:1;
+};
+
+#define WM831X_MAX_STATUS 2
+#define WM831X_MAX_DCDC 4
+#define WM831X_MAX_EPE 2
+#define WM831X_MAX_LDO 11
+#define WM831X_MAX_ISINK 2
+
+struct wm831x_pdata {
+ /** Called before subdevices are set up */
+ int (*pre_init)(struct wm831x *wm831x);
+ /** Called after subdevices are set up */
+ int (*post_init)(struct wm831x *wm831x);
+
+ int gpio_base;
+ struct wm831x_backup_pdata *backup;
+ struct wm831x_battery_pdata *battery;
+ struct wm831x_touch_pdata *touch;
+ struct wm831x_watchdog_pdata *watchdog;
+
+ /** LED1 = 0 and so on */
+ struct wm831x_status_pdata *status[WM831X_MAX_STATUS];
+ /** DCDC1 = 0 and so on */
+ struct regulator_init_data *dcdc[WM831X_MAX_DCDC];
+ /** EPE1 = 0 and so on */
+ struct regulator_init_data *epe[WM831X_MAX_EPE];
+ /** LDO1 = 0 and so on */
+ struct regulator_init_data *ldo[WM831X_MAX_LDO];
+ /** ISINK1 = 0 and so on*/
+ struct regulator_init_data *isink[WM831X_MAX_ISINK];
+};
+
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 03/22] mfd: Add WM831x interrupt support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
2009-07-27 13:45 ` [PATCH 01/22] mfd: Allow multiple MFD cells with the same name Mark Brown
2009-07-27 13:45 ` [PATCH 02/22] mfd: Initial core support for WM831x series devices Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:45 ` [PATCH 04/22] mfd: Add WM831x AUXADC support Mark Brown
` (19 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
The WM831x includes an interrupt controller managing interrupts for
the various functions on the chip. This patch adds support for the
core interrupt block on the device.
Ideally this would be supported by genirq, particularly for the
GPIOs, but currently genirq is unable to cope with controllers on
interrupt driven buses so we cut'n'paste the generic interface.
Once genirq is able to cope chips like this it should be a case
of filing the prefixes off the code and redoing wm831x-irq.c to
move over.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 12 +-
drivers/mfd/wm831x-irq.c | 559 ++++++++++++++++++++++++++++
include/linux/mfd/wm831x/core.h | 21 +
include/linux/mfd/wm831x/irq.h | 764 +++++++++++++++++++++++++++++++++++++++
4 files changed, 1354 insertions(+), 2 deletions(-)
create mode 100644 drivers/mfd/wm831x-irq.c
create mode 100644 include/linux/mfd/wm831x/irq.h
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index cc1040c..eb63d22 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -19,6 +19,7 @@
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
enum wm831x_parent {
WM8310 = 0,
@@ -1189,6 +1190,10 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
}
}
+ ret = wm831x_irq_init(wm831x, irq);
+ if (ret != 0)
+ goto err;
+
/* The core device is up, instantiate the subdevices. */
switch (parent) {
case WM8310:
@@ -1216,19 +1221,21 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
if (ret != 0) {
dev_err(wm831x->dev, "Failed to add children\n");
- goto err;
+ goto err_irq;
}
if (pdata && pdata->post_init) {
ret = pdata->post_init(wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "post_init() failed: %d\n", ret);
- goto err;
+ goto err_irq;
}
}
return 0;
+err_irq:
+ wm831x_irq_exit(wm831x);
err:
mfd_remove_devices(wm831x->dev);
kfree(wm831x);
@@ -1238,6 +1245,7 @@ err:
static void wm831x_device_exit(struct wm831x *wm831x)
{
mfd_remove_devices(wm831x->dev);
+ wm831x_irq_exit(wm831x);
kfree(wm831x);
}
diff --git a/drivers/mfd/wm831x-irq.c b/drivers/mfd/wm831x-irq.c
new file mode 100644
index 0000000..d3015df
--- /dev/null
+++ b/drivers/mfd/wm831x-irq.c
@@ -0,0 +1,559 @@
+/*
+ * wm831x-irq.c -- Interrupt controller support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/mfd/core.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/irq.h>
+
+#include <linux/delay.h>
+
+/*
+ * Since generic IRQs don't currently support interrupt controllers on
+ * interrupt driven buses we don't use genirq but instead provide an
+ * interface that looks very much like the standard ones. This leads
+ * to some bodges, including storing interrupt handler information in
+ * the static irq_data table we use to look up the data for individual
+ * interrupts, but hopefully won't last too long.
+ */
+
+struct wm831x_irq_data {
+ int primary;
+ int reg;
+ int mask;
+ irq_handler_t handler;
+ void *handler_data;
+};
+
+static struct wm831x_irq_data wm831x_irqs[] = {
+ [WM831X_IRQ_TEMP_THW] = {
+ .primary = WM831X_TEMP_INT,
+ .reg = 1,
+ .mask = WM831X_TEMP_THW_EINT,
+ },
+ [WM831X_IRQ_GPIO_1] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP1_EINT,
+ },
+ [WM831X_IRQ_GPIO_2] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP2_EINT,
+ },
+ [WM831X_IRQ_GPIO_3] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP3_EINT,
+ },
+ [WM831X_IRQ_GPIO_4] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP4_EINT,
+ },
+ [WM831X_IRQ_GPIO_5] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP5_EINT,
+ },
+ [WM831X_IRQ_GPIO_6] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP6_EINT,
+ },
+ [WM831X_IRQ_GPIO_7] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP7_EINT,
+ },
+ [WM831X_IRQ_GPIO_8] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP8_EINT,
+ },
+ [WM831X_IRQ_GPIO_9] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP9_EINT,
+ },
+ [WM831X_IRQ_GPIO_10] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP10_EINT,
+ },
+ [WM831X_IRQ_GPIO_11] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP11_EINT,
+ },
+ [WM831X_IRQ_GPIO_12] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP12_EINT,
+ },
+ [WM831X_IRQ_GPIO_13] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP13_EINT,
+ },
+ [WM831X_IRQ_GPIO_14] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP14_EINT,
+ },
+ [WM831X_IRQ_GPIO_15] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP15_EINT,
+ },
+ [WM831X_IRQ_GPIO_16] = {
+ .primary = WM831X_GP_INT,
+ .reg = 5,
+ .mask = WM831X_GP16_EINT,
+ },
+ [WM831X_IRQ_ON] = {
+ .primary = WM831X_ON_PIN_INT,
+ .reg = 1,
+ .mask = WM831X_ON_PIN_EINT,
+ },
+ [WM831X_IRQ_PPM_SYSLO] = {
+ .primary = WM831X_PPM_INT,
+ .reg = 1,
+ .mask = WM831X_PPM_SYSLO_EINT,
+ },
+ [WM831X_IRQ_PPM_PWR_SRC] = {
+ .primary = WM831X_PPM_INT,
+ .reg = 1,
+ .mask = WM831X_PPM_PWR_SRC_EINT,
+ },
+ [WM831X_IRQ_PPM_USB_CURR] = {
+ .primary = WM831X_PPM_INT,
+ .reg = 1,
+ .mask = WM831X_PPM_USB_CURR_EINT,
+ },
+ [WM831X_IRQ_WDOG_TO] = {
+ .primary = WM831X_WDOG_INT,
+ .reg = 1,
+ .mask = WM831X_WDOG_TO_EINT,
+ },
+ [WM831X_IRQ_RTC_PER] = {
+ .primary = WM831X_RTC_INT,
+ .reg = 1,
+ .mask = WM831X_RTC_PER_EINT,
+ },
+ [WM831X_IRQ_RTC_ALM] = {
+ .primary = WM831X_RTC_INT,
+ .reg = 1,
+ .mask = WM831X_RTC_ALM_EINT,
+ },
+ [WM831X_IRQ_CHG_BATT_HOT] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_BATT_HOT_EINT,
+ },
+ [WM831X_IRQ_CHG_BATT_COLD] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_BATT_COLD_EINT,
+ },
+ [WM831X_IRQ_CHG_BATT_FAIL] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_BATT_FAIL_EINT,
+ },
+ [WM831X_IRQ_CHG_OV] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_OV_EINT,
+ },
+ [WM831X_IRQ_CHG_END] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_END_EINT,
+ },
+ [WM831X_IRQ_CHG_TO] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_TO_EINT,
+ },
+ [WM831X_IRQ_CHG_MODE] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_MODE_EINT,
+ },
+ [WM831X_IRQ_CHG_START] = {
+ .primary = WM831X_CHG_INT,
+ .reg = 2,
+ .mask = WM831X_CHG_START_EINT,
+ },
+ [WM831X_IRQ_TCHDATA] = {
+ .primary = WM831X_TCHDATA_INT,
+ .reg = 1,
+ .mask = WM831X_TCHDATA_EINT,
+ },
+ [WM831X_IRQ_TCHPD] = {
+ .primary = WM831X_TCHPD_INT,
+ .reg = 1,
+ .mask = WM831X_TCHPD_EINT,
+ },
+ [WM831X_IRQ_AUXADC_DATA] = {
+ .primary = WM831X_AUXADC_INT,
+ .reg = 1,
+ .mask = WM831X_AUXADC_DATA_EINT,
+ },
+ [WM831X_IRQ_AUXADC_DCOMP1] = {
+ .primary = WM831X_AUXADC_INT,
+ .reg = 1,
+ .mask = WM831X_AUXADC_DCOMP1_EINT,
+ },
+ [WM831X_IRQ_AUXADC_DCOMP2] = {
+ .primary = WM831X_AUXADC_INT,
+ .reg = 1,
+ .mask = WM831X_AUXADC_DCOMP2_EINT,
+ },
+ [WM831X_IRQ_AUXADC_DCOMP3] = {
+ .primary = WM831X_AUXADC_INT,
+ .reg = 1,
+ .mask = WM831X_AUXADC_DCOMP3_EINT,
+ },
+ [WM831X_IRQ_AUXADC_DCOMP4] = {
+ .primary = WM831X_AUXADC_INT,
+ .reg = 1,
+ .mask = WM831X_AUXADC_DCOMP4_EINT,
+ },
+ [WM831X_IRQ_CS1] = {
+ .primary = WM831X_CS_INT,
+ .reg = 2,
+ .mask = WM831X_CS1_EINT,
+ },
+ [WM831X_IRQ_CS2] = {
+ .primary = WM831X_CS_INT,
+ .reg = 2,
+ .mask = WM831X_CS2_EINT,
+ },
+ [WM831X_IRQ_HC_DC1] = {
+ .primary = WM831X_HC_INT,
+ .reg = 4,
+ .mask = WM831X_HC_DC1_EINT,
+ },
+ [WM831X_IRQ_HC_DC2] = {
+ .primary = WM831X_HC_INT,
+ .reg = 4,
+ .mask = WM831X_HC_DC2_EINT,
+ },
+ [WM831X_IRQ_UV_LDO1] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO1_EINT,
+ },
+ [WM831X_IRQ_UV_LDO2] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO2_EINT,
+ },
+ [WM831X_IRQ_UV_LDO3] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO3_EINT,
+ },
+ [WM831X_IRQ_UV_LDO4] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO4_EINT,
+ },
+ [WM831X_IRQ_UV_LDO5] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO5_EINT,
+ },
+ [WM831X_IRQ_UV_LDO6] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO6_EINT,
+ },
+ [WM831X_IRQ_UV_LDO7] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO7_EINT,
+ },
+ [WM831X_IRQ_UV_LDO8] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO8_EINT,
+ },
+ [WM831X_IRQ_UV_LDO9] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO9_EINT,
+ },
+ [WM831X_IRQ_UV_LDO10] = {
+ .primary = WM831X_UV_INT,
+ .reg = 3,
+ .mask = WM831X_UV_LDO10_EINT,
+ },
+ [WM831X_IRQ_UV_DC1] = {
+ .primary = WM831X_UV_INT,
+ .reg = 4,
+ .mask = WM831X_UV_DC1_EINT,
+ },
+ [WM831X_IRQ_UV_DC2] = {
+ .primary = WM831X_UV_INT,
+ .reg = 4,
+ .mask = WM831X_UV_DC2_EINT,
+ },
+ [WM831X_IRQ_UV_DC3] = {
+ .primary = WM831X_UV_INT,
+ .reg = 4,
+ .mask = WM831X_UV_DC3_EINT,
+ },
+ [WM831X_IRQ_UV_DC4] = {
+ .primary = WM831X_UV_INT,
+ .reg = 4,
+ .mask = WM831X_UV_DC4_EINT,
+ },
+};
+
+static inline int irq_data_to_status_reg(struct wm831x_irq_data *irq_data)
+{
+ return WM831X_INTERRUPT_STATUS_1 - 1 + irq_data->reg;
+}
+
+static inline int irq_data_to_mask_reg(struct wm831x_irq_data *irq_data)
+{
+ return WM831X_INTERRUPT_STATUS_1_MASK - 1 + irq_data->reg;
+}
+
+static void __wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+ struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+ wm831x->irq_masks[irq_data->reg - 1] &= ~irq_data->mask;
+ wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+ wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_enable_irq(struct wm831x *wm831x, int irq)
+{
+ mutex_lock(&wm831x->irq_lock);
+ __wm831x_enable_irq(wm831x, irq);
+ mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_enable_irq);
+
+static void __wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+ struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+ wm831x->irq_masks[irq_data->reg - 1] |= irq_data->mask;
+ wm831x_reg_write(wm831x, irq_data_to_mask_reg(irq_data),
+ wm831x->irq_masks[irq_data->reg - 1]);
+}
+
+void wm831x_disable_irq(struct wm831x *wm831x, int irq)
+{
+ mutex_lock(&wm831x->irq_lock);
+ __wm831x_disable_irq(wm831x, irq);
+ mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_disable_irq);
+
+int wm831x_request_irq(struct wm831x *wm831x,
+ unsigned int irq, irq_handler_t handler,
+ unsigned long flags, const char *name,
+ void *dev)
+{
+ int ret = 0;
+
+ if (irq < 0 || irq >= WM831X_NUM_IRQS)
+ return -EINVAL;
+
+ mutex_lock(&wm831x->irq_lock);
+
+ if (wm831x_irqs[irq].handler) {
+ dev_err(wm831x->dev, "Already have handler for IRQ %d\n", irq);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ wm831x_irqs[irq].handler = handler;
+ wm831x_irqs[irq].handler_data = dev;
+
+ __wm831x_enable_irq(wm831x, irq);
+
+out:
+ mutex_unlock(&wm831x->irq_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_request_irq);
+
+void wm831x_free_irq(struct wm831x *wm831x, unsigned int irq, void *data)
+{
+ if (irq < 0 || irq >= WM831X_NUM_IRQS)
+ return;
+
+ mutex_lock(&wm831x->irq_lock);
+
+ wm831x_irqs[irq].handler = NULL;
+ wm831x_irqs[irq].handler_data = NULL;
+
+ __wm831x_disable_irq(wm831x, irq);
+
+ mutex_unlock(&wm831x->irq_lock);
+}
+EXPORT_SYMBOL_GPL(wm831x_free_irq);
+
+
+static void wm831x_handle_irq(struct wm831x *wm831x, int irq, int status)
+{
+ struct wm831x_irq_data *irq_data = &wm831x_irqs[irq];
+
+ if (irq_data->handler) {
+ irq_data->handler(irq, irq_data->handler_data);
+ wm831x_reg_write(wm831x, irq_data_to_status_reg(irq_data),
+ irq_data->mask);
+ } else {
+ dev_err(wm831x->dev, "Unhandled IRQ %d, masking\n", irq);
+ __wm831x_disable_irq(wm831x, irq);
+ }
+}
+
+/* Main interrupt handling occurs in a workqueue since we need
+ * interrupts enabled to interact with the chip. */
+static void wm831x_irq_worker(struct work_struct *work)
+{
+ struct wm831x *wm831x = container_of(work, struct wm831x, irq_work);
+ unsigned int i;
+ int primary;
+ int status_regs[5];
+ int read[5] = { 0 };
+ int *status;
+
+ primary = wm831x_reg_read(wm831x, WM831X_SYSTEM_INTERRUPTS);
+ if (primary < 0) {
+ dev_err(wm831x->dev, "Failed to read system interrupt: %d\n",
+ primary);
+ goto out;
+ }
+
+ mutex_lock(&wm831x->irq_lock);
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_irqs); i++) {
+ int offset = wm831x_irqs[i].reg - 1;
+
+ if (!(primary & wm831x_irqs[i].primary))
+ continue;
+
+ status = &status_regs[offset];
+
+ /* Hopefully there should only be one register to read
+ * each time otherwise we ought to do a block read. */
+ if (!read[offset]) {
+ *status = wm831x_reg_read(wm831x,
+ irq_data_to_status_reg(&wm831x_irqs[i]));
+ if (*status < 0) {
+ dev_err(wm831x->dev,
+ "Failed to read IRQ status: %d\n",
+ *status);
+ goto out_lock;
+ }
+
+ /* Mask out the disabled IRQs */
+ *status &= ~wm831x->irq_masks[offset];
+ read[offset] = 1;
+ }
+
+ if (*status & wm831x_irqs[i].mask)
+ wm831x_handle_irq(wm831x, i, *status);
+ }
+
+out_lock:
+ mutex_unlock(&wm831x->irq_lock);
+out:
+ enable_irq(wm831x->irq);
+}
+
+
+static irqreturn_t wm831x_cpu_irq(int irq, void *data)
+{
+ struct wm831x *wm831x = data;
+
+ /* Shut the interrupt to the CPU up and schedule the actual
+ * handler; we can't check that the IRQ is asserted. */
+ disable_irq_nosync(irq);
+
+ queue_work(wm831x->irq_wq, &wm831x->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+int wm831x_irq_init(struct wm831x *wm831x, int irq)
+{
+ int i, ret;
+
+ if (!irq) {
+ dev_warn(wm831x->dev,
+ "No interrupt specified - functionality limited\n");
+ return 0;
+ }
+
+
+ wm831x->irq_wq = create_singlethread_workqueue("wm831x-irq");
+ if (!wm831x->irq_wq) {
+ dev_err(wm831x->dev, "Failed to allocate IRQ worker\n");
+ return -ESRCH;
+ }
+
+ wm831x->irq = irq;
+ mutex_init(&wm831x->irq_lock);
+ INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
+
+ /* Mask the individual interrupt sources */
+ for (i = 0; i < ARRAY_SIZE(wm831x->irq_masks); i++) {
+ wm831x->irq_masks[i] = 0xffff;
+ wm831x_reg_write(wm831x, WM831X_INTERRUPT_STATUS_1_MASK + i,
+ 0xffff);
+ }
+
+ /* Enable top level interrupts, we mask at secondary level */
+ wm831x_reg_write(wm831x, WM831X_SYSTEM_INTERRUPTS_MASK, 0);
+
+ /* We're good to go. We set IRQF_SHARED since there's a
+ * chance the driver will interoperate with another driver but
+ * the need to disable the IRQ while handing via I2C/SPI means
+ * that this may break and performance will be impacted. If
+ * this does happen it's a hardware design issue and the only
+ * other alternative would be polling.
+ */
+ ret = request_irq(irq, wm831x_cpu_irq, IRQF_TRIGGER_LOW | IRQF_SHARED,
+ "wm831x", wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to request IRQ %d: %d\n",
+ irq, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+void wm831x_irq_exit(struct wm831x *wm831x)
+{
+ if (wm831x->irq)
+ free_irq(wm831x->irq, wm831x);
+}
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index d90e693..b96c935 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -15,6 +15,9 @@
#ifndef __MFD_WM831X_CORE_H__
#define __MFD_WM831X_CORE_H__
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
/*
* Register values.
*/
@@ -224,6 +227,13 @@ struct wm831x {
void *control_data;
+ int irq; /* Our chip IRQ */
+ struct mutex irq_lock;
+ struct workqueue_struct *irq_wq;
+ struct work_struct irq_work;
+ unsigned int irq_base;
+ int irq_masks[5];
+
/* The WM831x has a security key blocking access to certain
* registers. The mutex is taken by the accessors for locking
* and unlocking the security key, locked is used to fail
@@ -244,4 +254,15 @@ int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg,
int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
int count, u16 *buf);
+int wm831x_irq_init(struct wm831x *wm831x, int irq);
+void wm831x_irq_exit(struct wm831x *wm831x);
+
+int __must_check wm831x_request_irq(struct wm831x *wm831x,
+ unsigned int irq, irq_handler_t handler,
+ unsigned long flags, const char *name,
+ void *dev);
+void wm831x_free_irq(struct wm831x *wm831x, unsigned int, void *);
+void wm831x_disable_irq(struct wm831x *wm831x, int irq);
+void wm831x_enable_irq(struct wm831x *wm831x, int irq);
+
#endif
diff --git a/include/linux/mfd/wm831x/irq.h b/include/linux/mfd/wm831x/irq.h
new file mode 100644
index 0000000..3a8c976
--- /dev/null
+++ b/include/linux/mfd/wm831x/irq.h
@@ -0,0 +1,764 @@
+/*
+ * include/linux/mfd/wm831x/irq.h -- Interrupt controller for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_IRQ_H__
+#define __MFD_WM831X_IRQ_H__
+
+/* Interrupt number assignments within Linux */
+#define WM831X_IRQ_TEMP_THW 0
+#define WM831X_IRQ_GPIO_1 1
+#define WM831X_IRQ_GPIO_2 2
+#define WM831X_IRQ_GPIO_3 3
+#define WM831X_IRQ_GPIO_4 4
+#define WM831X_IRQ_GPIO_5 5
+#define WM831X_IRQ_GPIO_6 6
+#define WM831X_IRQ_GPIO_7 7
+#define WM831X_IRQ_GPIO_8 8
+#define WM831X_IRQ_GPIO_9 9
+#define WM831X_IRQ_GPIO_10 10
+#define WM831X_IRQ_GPIO_11 11
+#define WM831X_IRQ_GPIO_12 12
+#define WM831X_IRQ_GPIO_13 13
+#define WM831X_IRQ_GPIO_14 14
+#define WM831X_IRQ_GPIO_15 15
+#define WM831X_IRQ_GPIO_16 16
+#define WM831X_IRQ_ON 17
+#define WM831X_IRQ_PPM_SYSLO 18
+#define WM831X_IRQ_PPM_PWR_SRC 19
+#define WM831X_IRQ_PPM_USB_CURR 20
+#define WM831X_IRQ_WDOG_TO 21
+#define WM831X_IRQ_RTC_PER 22
+#define WM831X_IRQ_RTC_ALM 23
+#define WM831X_IRQ_CHG_BATT_HOT 24
+#define WM831X_IRQ_CHG_BATT_COLD 25
+#define WM831X_IRQ_CHG_BATT_FAIL 26
+#define WM831X_IRQ_CHG_OV 27
+#define WM831X_IRQ_CHG_END 29
+#define WM831X_IRQ_CHG_TO 30
+#define WM831X_IRQ_CHG_MODE 31
+#define WM831X_IRQ_CHG_START 32
+#define WM831X_IRQ_TCHDATA 33
+#define WM831X_IRQ_TCHPD 34
+#define WM831X_IRQ_AUXADC_DATA 35
+#define WM831X_IRQ_AUXADC_DCOMP1 36
+#define WM831X_IRQ_AUXADC_DCOMP2 37
+#define WM831X_IRQ_AUXADC_DCOMP3 38
+#define WM831X_IRQ_AUXADC_DCOMP4 39
+#define WM831X_IRQ_CS1 40
+#define WM831X_IRQ_CS2 41
+#define WM831X_IRQ_HC_DC1 42
+#define WM831X_IRQ_HC_DC2 43
+#define WM831X_IRQ_UV_LDO1 44
+#define WM831X_IRQ_UV_LDO2 45
+#define WM831X_IRQ_UV_LDO3 46
+#define WM831X_IRQ_UV_LDO4 47
+#define WM831X_IRQ_UV_LDO5 48
+#define WM831X_IRQ_UV_LDO6 49
+#define WM831X_IRQ_UV_LDO7 50
+#define WM831X_IRQ_UV_LDO8 51
+#define WM831X_IRQ_UV_LDO9 52
+#define WM831X_IRQ_UV_LDO10 53
+#define WM831X_IRQ_UV_DC1 54
+#define WM831X_IRQ_UV_DC2 55
+#define WM831X_IRQ_UV_DC3 56
+#define WM831X_IRQ_UV_DC4 57
+
+#define WM831X_NUM_IRQS 58
+
+/*
+ * R16400 (0x4010) - System Interrupts
+ */
+#define WM831X_PS_INT 0x8000 /* PS_INT */
+#define WM831X_PS_INT_MASK 0x8000 /* PS_INT */
+#define WM831X_PS_INT_SHIFT 15 /* PS_INT */
+#define WM831X_PS_INT_WIDTH 1 /* PS_INT */
+#define WM831X_TEMP_INT 0x4000 /* TEMP_INT */
+#define WM831X_TEMP_INT_MASK 0x4000 /* TEMP_INT */
+#define WM831X_TEMP_INT_SHIFT 14 /* TEMP_INT */
+#define WM831X_TEMP_INT_WIDTH 1 /* TEMP_INT */
+#define WM831X_GP_INT 0x2000 /* GP_INT */
+#define WM831X_GP_INT_MASK 0x2000 /* GP_INT */
+#define WM831X_GP_INT_SHIFT 13 /* GP_INT */
+#define WM831X_GP_INT_WIDTH 1 /* GP_INT */
+#define WM831X_ON_PIN_INT 0x1000 /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_MASK 0x1000 /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_SHIFT 12 /* ON_PIN_INT */
+#define WM831X_ON_PIN_INT_WIDTH 1 /* ON_PIN_INT */
+#define WM831X_WDOG_INT 0x0800 /* WDOG_INT */
+#define WM831X_WDOG_INT_MASK 0x0800 /* WDOG_INT */
+#define WM831X_WDOG_INT_SHIFT 11 /* WDOG_INT */
+#define WM831X_WDOG_INT_WIDTH 1 /* WDOG_INT */
+#define WM831X_TCHDATA_INT 0x0400 /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_MASK 0x0400 /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_SHIFT 10 /* TCHDATA_INT */
+#define WM831X_TCHDATA_INT_WIDTH 1 /* TCHDATA_INT */
+#define WM831X_TCHPD_INT 0x0200 /* TCHPD_INT */
+#define WM831X_TCHPD_INT_MASK 0x0200 /* TCHPD_INT */
+#define WM831X_TCHPD_INT_SHIFT 9 /* TCHPD_INT */
+#define WM831X_TCHPD_INT_WIDTH 1 /* TCHPD_INT */
+#define WM831X_AUXADC_INT 0x0100 /* AUXADC_INT */
+#define WM831X_AUXADC_INT_MASK 0x0100 /* AUXADC_INT */
+#define WM831X_AUXADC_INT_SHIFT 8 /* AUXADC_INT */
+#define WM831X_AUXADC_INT_WIDTH 1 /* AUXADC_INT */
+#define WM831X_PPM_INT 0x0080 /* PPM_INT */
+#define WM831X_PPM_INT_MASK 0x0080 /* PPM_INT */
+#define WM831X_PPM_INT_SHIFT 7 /* PPM_INT */
+#define WM831X_PPM_INT_WIDTH 1 /* PPM_INT */
+#define WM831X_CS_INT 0x0040 /* CS_INT */
+#define WM831X_CS_INT_MASK 0x0040 /* CS_INT */
+#define WM831X_CS_INT_SHIFT 6 /* CS_INT */
+#define WM831X_CS_INT_WIDTH 1 /* CS_INT */
+#define WM831X_RTC_INT 0x0020 /* RTC_INT */
+#define WM831X_RTC_INT_MASK 0x0020 /* RTC_INT */
+#define WM831X_RTC_INT_SHIFT 5 /* RTC_INT */
+#define WM831X_RTC_INT_WIDTH 1 /* RTC_INT */
+#define WM831X_OTP_INT 0x0010 /* OTP_INT */
+#define WM831X_OTP_INT_MASK 0x0010 /* OTP_INT */
+#define WM831X_OTP_INT_SHIFT 4 /* OTP_INT */
+#define WM831X_OTP_INT_WIDTH 1 /* OTP_INT */
+#define WM831X_CHILD_INT 0x0008 /* CHILD_INT */
+#define WM831X_CHILD_INT_MASK 0x0008 /* CHILD_INT */
+#define WM831X_CHILD_INT_SHIFT 3 /* CHILD_INT */
+#define WM831X_CHILD_INT_WIDTH 1 /* CHILD_INT */
+#define WM831X_CHG_INT 0x0004 /* CHG_INT */
+#define WM831X_CHG_INT_MASK 0x0004 /* CHG_INT */
+#define WM831X_CHG_INT_SHIFT 2 /* CHG_INT */
+#define WM831X_CHG_INT_WIDTH 1 /* CHG_INT */
+#define WM831X_HC_INT 0x0002 /* HC_INT */
+#define WM831X_HC_INT_MASK 0x0002 /* HC_INT */
+#define WM831X_HC_INT_SHIFT 1 /* HC_INT */
+#define WM831X_HC_INT_WIDTH 1 /* HC_INT */
+#define WM831X_UV_INT 0x0001 /* UV_INT */
+#define WM831X_UV_INT_MASK 0x0001 /* UV_INT */
+#define WM831X_UV_INT_SHIFT 0 /* UV_INT */
+#define WM831X_UV_INT_WIDTH 1 /* UV_INT */
+
+/*
+ * R16401 (0x4011) - Interrupt Status 1
+ */
+#define WM831X_PPM_SYSLO_EINT 0x8000 /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_MASK 0x8000 /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_SHIFT 15 /* PPM_SYSLO_EINT */
+#define WM831X_PPM_SYSLO_EINT_WIDTH 1 /* PPM_SYSLO_EINT */
+#define WM831X_PPM_PWR_SRC_EINT 0x4000 /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_MASK 0x4000 /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_SHIFT 14 /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_PWR_SRC_EINT_WIDTH 1 /* PPM_PWR_SRC_EINT */
+#define WM831X_PPM_USB_CURR_EINT 0x2000 /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_MASK 0x2000 /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_SHIFT 13 /* PPM_USB_CURR_EINT */
+#define WM831X_PPM_USB_CURR_EINT_WIDTH 1 /* PPM_USB_CURR_EINT */
+#define WM831X_ON_PIN_EINT 0x1000 /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_MASK 0x1000 /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_SHIFT 12 /* ON_PIN_EINT */
+#define WM831X_ON_PIN_EINT_WIDTH 1 /* ON_PIN_EINT */
+#define WM831X_WDOG_TO_EINT 0x0800 /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_MASK 0x0800 /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_SHIFT 11 /* WDOG_TO_EINT */
+#define WM831X_WDOG_TO_EINT_WIDTH 1 /* WDOG_TO_EINT */
+#define WM831X_TCHDATA_EINT 0x0400 /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_MASK 0x0400 /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_SHIFT 10 /* TCHDATA_EINT */
+#define WM831X_TCHDATA_EINT_WIDTH 1 /* TCHDATA_EINT */
+#define WM831X_TCHPD_EINT 0x0200 /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_MASK 0x0200 /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_SHIFT 9 /* TCHPD_EINT */
+#define WM831X_TCHPD_EINT_WIDTH 1 /* TCHPD_EINT */
+#define WM831X_AUXADC_DATA_EINT 0x0100 /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_MASK 0x0100 /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_SHIFT 8 /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DATA_EINT_WIDTH 1 /* AUXADC_DATA_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT 0x0080 /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_MASK 0x0080 /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_SHIFT 7 /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP4_EINT_WIDTH 1 /* AUXADC_DCOMP4_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT 0x0040 /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_MASK 0x0040 /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_SHIFT 6 /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP3_EINT_WIDTH 1 /* AUXADC_DCOMP3_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT 0x0020 /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_MASK 0x0020 /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_SHIFT 5 /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP2_EINT_WIDTH 1 /* AUXADC_DCOMP2_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT 0x0010 /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_MASK 0x0010 /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_SHIFT 4 /* AUXADC_DCOMP1_EINT */
+#define WM831X_AUXADC_DCOMP1_EINT_WIDTH 1 /* AUXADC_DCOMP1_EINT */
+#define WM831X_RTC_PER_EINT 0x0008 /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_MASK 0x0008 /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_SHIFT 3 /* RTC_PER_EINT */
+#define WM831X_RTC_PER_EINT_WIDTH 1 /* RTC_PER_EINT */
+#define WM831X_RTC_ALM_EINT 0x0004 /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_MASK 0x0004 /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_SHIFT 2 /* RTC_ALM_EINT */
+#define WM831X_RTC_ALM_EINT_WIDTH 1 /* RTC_ALM_EINT */
+#define WM831X_TEMP_THW_EINT 0x0002 /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_MASK 0x0002 /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_SHIFT 1 /* TEMP_THW_EINT */
+#define WM831X_TEMP_THW_EINT_WIDTH 1 /* TEMP_THW_EINT */
+
+/*
+ * R16402 (0x4012) - Interrupt Status 2
+ */
+#define WM831X_CHG_BATT_HOT_EINT 0x8000 /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_MASK 0x8000 /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_SHIFT 15 /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_HOT_EINT_WIDTH 1 /* CHG_BATT_HOT_EINT */
+#define WM831X_CHG_BATT_COLD_EINT 0x4000 /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_MASK 0x4000 /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_SHIFT 14 /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_COLD_EINT_WIDTH 1 /* CHG_BATT_COLD_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT 0x2000 /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_MASK 0x2000 /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_SHIFT 13 /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_BATT_FAIL_EINT_WIDTH 1 /* CHG_BATT_FAIL_EINT */
+#define WM831X_CHG_OV_EINT 0x1000 /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_MASK 0x1000 /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_SHIFT 12 /* CHG_OV_EINT */
+#define WM831X_CHG_OV_EINT_WIDTH 1 /* CHG_OV_EINT */
+#define WM831X_CHG_END_EINT 0x0800 /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_MASK 0x0800 /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_SHIFT 11 /* CHG_END_EINT */
+#define WM831X_CHG_END_EINT_WIDTH 1 /* CHG_END_EINT */
+#define WM831X_CHG_TO_EINT 0x0400 /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_MASK 0x0400 /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_SHIFT 10 /* CHG_TO_EINT */
+#define WM831X_CHG_TO_EINT_WIDTH 1 /* CHG_TO_EINT */
+#define WM831X_CHG_MODE_EINT 0x0200 /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_MASK 0x0200 /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_SHIFT 9 /* CHG_MODE_EINT */
+#define WM831X_CHG_MODE_EINT_WIDTH 1 /* CHG_MODE_EINT */
+#define WM831X_CHG_START_EINT 0x0100 /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_MASK 0x0100 /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_SHIFT 8 /* CHG_START_EINT */
+#define WM831X_CHG_START_EINT_WIDTH 1 /* CHG_START_EINT */
+#define WM831X_CS2_EINT 0x0080 /* CS2_EINT */
+#define WM831X_CS2_EINT_MASK 0x0080 /* CS2_EINT */
+#define WM831X_CS2_EINT_SHIFT 7 /* CS2_EINT */
+#define WM831X_CS2_EINT_WIDTH 1 /* CS2_EINT */
+#define WM831X_CS1_EINT 0x0040 /* CS1_EINT */
+#define WM831X_CS1_EINT_MASK 0x0040 /* CS1_EINT */
+#define WM831X_CS1_EINT_SHIFT 6 /* CS1_EINT */
+#define WM831X_CS1_EINT_WIDTH 1 /* CS1_EINT */
+#define WM831X_OTP_CMD_END_EINT 0x0020 /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_MASK 0x0020 /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_SHIFT 5 /* OTP_CMD_END_EINT */
+#define WM831X_OTP_CMD_END_EINT_WIDTH 1 /* OTP_CMD_END_EINT */
+#define WM831X_OTP_ERR_EINT 0x0010 /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_MASK 0x0010 /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_SHIFT 4 /* OTP_ERR_EINT */
+#define WM831X_OTP_ERR_EINT_WIDTH 1 /* OTP_ERR_EINT */
+#define WM831X_PS_POR_EINT 0x0004 /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_MASK 0x0004 /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_SHIFT 2 /* PS_POR_EINT */
+#define WM831X_PS_POR_EINT_WIDTH 1 /* PS_POR_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT 0x0002 /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_MASK 0x0002 /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_SHIFT 1 /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_SLEEP_OFF_EINT_WIDTH 1 /* PS_SLEEP_OFF_EINT */
+#define WM831X_PS_ON_WAKE_EINT 0x0001 /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_MASK 0x0001 /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_SHIFT 0 /* PS_ON_WAKE_EINT */
+#define WM831X_PS_ON_WAKE_EINT_WIDTH 1 /* PS_ON_WAKE_EINT */
+
+/*
+ * R16403 (0x4013) - Interrupt Status 3
+ */
+#define WM831X_UV_LDO10_EINT 0x0200 /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_MASK 0x0200 /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_SHIFT 9 /* UV_LDO10_EINT */
+#define WM831X_UV_LDO10_EINT_WIDTH 1 /* UV_LDO10_EINT */
+#define WM831X_UV_LDO9_EINT 0x0100 /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_MASK 0x0100 /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_SHIFT 8 /* UV_LDO9_EINT */
+#define WM831X_UV_LDO9_EINT_WIDTH 1 /* UV_LDO9_EINT */
+#define WM831X_UV_LDO8_EINT 0x0080 /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_MASK 0x0080 /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_SHIFT 7 /* UV_LDO8_EINT */
+#define WM831X_UV_LDO8_EINT_WIDTH 1 /* UV_LDO8_EINT */
+#define WM831X_UV_LDO7_EINT 0x0040 /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_MASK 0x0040 /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_SHIFT 6 /* UV_LDO7_EINT */
+#define WM831X_UV_LDO7_EINT_WIDTH 1 /* UV_LDO7_EINT */
+#define WM831X_UV_LDO6_EINT 0x0020 /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_MASK 0x0020 /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_SHIFT 5 /* UV_LDO6_EINT */
+#define WM831X_UV_LDO6_EINT_WIDTH 1 /* UV_LDO6_EINT */
+#define WM831X_UV_LDO5_EINT 0x0010 /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_MASK 0x0010 /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_SHIFT 4 /* UV_LDO5_EINT */
+#define WM831X_UV_LDO5_EINT_WIDTH 1 /* UV_LDO5_EINT */
+#define WM831X_UV_LDO4_EINT 0x0008 /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_MASK 0x0008 /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_SHIFT 3 /* UV_LDO4_EINT */
+#define WM831X_UV_LDO4_EINT_WIDTH 1 /* UV_LDO4_EINT */
+#define WM831X_UV_LDO3_EINT 0x0004 /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_MASK 0x0004 /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_SHIFT 2 /* UV_LDO3_EINT */
+#define WM831X_UV_LDO3_EINT_WIDTH 1 /* UV_LDO3_EINT */
+#define WM831X_UV_LDO2_EINT 0x0002 /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_MASK 0x0002 /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_SHIFT 1 /* UV_LDO2_EINT */
+#define WM831X_UV_LDO2_EINT_WIDTH 1 /* UV_LDO2_EINT */
+#define WM831X_UV_LDO1_EINT 0x0001 /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_MASK 0x0001 /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_SHIFT 0 /* UV_LDO1_EINT */
+#define WM831X_UV_LDO1_EINT_WIDTH 1 /* UV_LDO1_EINT */
+
+/*
+ * R16404 (0x4014) - Interrupt Status 4
+ */
+#define WM831X_HC_DC2_EINT 0x0200 /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_MASK 0x0200 /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_SHIFT 9 /* HC_DC2_EINT */
+#define WM831X_HC_DC2_EINT_WIDTH 1 /* HC_DC2_EINT */
+#define WM831X_HC_DC1_EINT 0x0100 /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_MASK 0x0100 /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_SHIFT 8 /* HC_DC1_EINT */
+#define WM831X_HC_DC1_EINT_WIDTH 1 /* HC_DC1_EINT */
+#define WM831X_UV_DC4_EINT 0x0008 /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_MASK 0x0008 /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_SHIFT 3 /* UV_DC4_EINT */
+#define WM831X_UV_DC4_EINT_WIDTH 1 /* UV_DC4_EINT */
+#define WM831X_UV_DC3_EINT 0x0004 /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_MASK 0x0004 /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_SHIFT 2 /* UV_DC3_EINT */
+#define WM831X_UV_DC3_EINT_WIDTH 1 /* UV_DC3_EINT */
+#define WM831X_UV_DC2_EINT 0x0002 /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_MASK 0x0002 /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_SHIFT 1 /* UV_DC2_EINT */
+#define WM831X_UV_DC2_EINT_WIDTH 1 /* UV_DC2_EINT */
+#define WM831X_UV_DC1_EINT 0x0001 /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_MASK 0x0001 /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_SHIFT 0 /* UV_DC1_EINT */
+#define WM831X_UV_DC1_EINT_WIDTH 1 /* UV_DC1_EINT */
+
+/*
+ * R16405 (0x4015) - Interrupt Status 5
+ */
+#define WM831X_GP16_EINT 0x8000 /* GP16_EINT */
+#define WM831X_GP16_EINT_MASK 0x8000 /* GP16_EINT */
+#define WM831X_GP16_EINT_SHIFT 15 /* GP16_EINT */
+#define WM831X_GP16_EINT_WIDTH 1 /* GP16_EINT */
+#define WM831X_GP15_EINT 0x4000 /* GP15_EINT */
+#define WM831X_GP15_EINT_MASK 0x4000 /* GP15_EINT */
+#define WM831X_GP15_EINT_SHIFT 14 /* GP15_EINT */
+#define WM831X_GP15_EINT_WIDTH 1 /* GP15_EINT */
+#define WM831X_GP14_EINT 0x2000 /* GP14_EINT */
+#define WM831X_GP14_EINT_MASK 0x2000 /* GP14_EINT */
+#define WM831X_GP14_EINT_SHIFT 13 /* GP14_EINT */
+#define WM831X_GP14_EINT_WIDTH 1 /* GP14_EINT */
+#define WM831X_GP13_EINT 0x1000 /* GP13_EINT */
+#define WM831X_GP13_EINT_MASK 0x1000 /* GP13_EINT */
+#define WM831X_GP13_EINT_SHIFT 12 /* GP13_EINT */
+#define WM831X_GP13_EINT_WIDTH 1 /* GP13_EINT */
+#define WM831X_GP12_EINT 0x0800 /* GP12_EINT */
+#define WM831X_GP12_EINT_MASK 0x0800 /* GP12_EINT */
+#define WM831X_GP12_EINT_SHIFT 11 /* GP12_EINT */
+#define WM831X_GP12_EINT_WIDTH 1 /* GP12_EINT */
+#define WM831X_GP11_EINT 0x0400 /* GP11_EINT */
+#define WM831X_GP11_EINT_MASK 0x0400 /* GP11_EINT */
+#define WM831X_GP11_EINT_SHIFT 10 /* GP11_EINT */
+#define WM831X_GP11_EINT_WIDTH 1 /* GP11_EINT */
+#define WM831X_GP10_EINT 0x0200 /* GP10_EINT */
+#define WM831X_GP10_EINT_MASK 0x0200 /* GP10_EINT */
+#define WM831X_GP10_EINT_SHIFT 9 /* GP10_EINT */
+#define WM831X_GP10_EINT_WIDTH 1 /* GP10_EINT */
+#define WM831X_GP9_EINT 0x0100 /* GP9_EINT */
+#define WM831X_GP9_EINT_MASK 0x0100 /* GP9_EINT */
+#define WM831X_GP9_EINT_SHIFT 8 /* GP9_EINT */
+#define WM831X_GP9_EINT_WIDTH 1 /* GP9_EINT */
+#define WM831X_GP8_EINT 0x0080 /* GP8_EINT */
+#define WM831X_GP8_EINT_MASK 0x0080 /* GP8_EINT */
+#define WM831X_GP8_EINT_SHIFT 7 /* GP8_EINT */
+#define WM831X_GP8_EINT_WIDTH 1 /* GP8_EINT */
+#define WM831X_GP7_EINT 0x0040 /* GP7_EINT */
+#define WM831X_GP7_EINT_MASK 0x0040 /* GP7_EINT */
+#define WM831X_GP7_EINT_SHIFT 6 /* GP7_EINT */
+#define WM831X_GP7_EINT_WIDTH 1 /* GP7_EINT */
+#define WM831X_GP6_EINT 0x0020 /* GP6_EINT */
+#define WM831X_GP6_EINT_MASK 0x0020 /* GP6_EINT */
+#define WM831X_GP6_EINT_SHIFT 5 /* GP6_EINT */
+#define WM831X_GP6_EINT_WIDTH 1 /* GP6_EINT */
+#define WM831X_GP5_EINT 0x0010 /* GP5_EINT */
+#define WM831X_GP5_EINT_MASK 0x0010 /* GP5_EINT */
+#define WM831X_GP5_EINT_SHIFT 4 /* GP5_EINT */
+#define WM831X_GP5_EINT_WIDTH 1 /* GP5_EINT */
+#define WM831X_GP4_EINT 0x0008 /* GP4_EINT */
+#define WM831X_GP4_EINT_MASK 0x0008 /* GP4_EINT */
+#define WM831X_GP4_EINT_SHIFT 3 /* GP4_EINT */
+#define WM831X_GP4_EINT_WIDTH 1 /* GP4_EINT */
+#define WM831X_GP3_EINT 0x0004 /* GP3_EINT */
+#define WM831X_GP3_EINT_MASK 0x0004 /* GP3_EINT */
+#define WM831X_GP3_EINT_SHIFT 2 /* GP3_EINT */
+#define WM831X_GP3_EINT_WIDTH 1 /* GP3_EINT */
+#define WM831X_GP2_EINT 0x0002 /* GP2_EINT */
+#define WM831X_GP2_EINT_MASK 0x0002 /* GP2_EINT */
+#define WM831X_GP2_EINT_SHIFT 1 /* GP2_EINT */
+#define WM831X_GP2_EINT_WIDTH 1 /* GP2_EINT */
+#define WM831X_GP1_EINT 0x0001 /* GP1_EINT */
+#define WM831X_GP1_EINT_MASK 0x0001 /* GP1_EINT */
+#define WM831X_GP1_EINT_SHIFT 0 /* GP1_EINT */
+#define WM831X_GP1_EINT_WIDTH 1 /* GP1_EINT */
+
+/*
+ * R16407 (0x4017) - IRQ Config
+ */
+#define WM831X_IRQ_OD 0x0002 /* IRQ_OD */
+#define WM831X_IRQ_OD_MASK 0x0002 /* IRQ_OD */
+#define WM831X_IRQ_OD_SHIFT 1 /* IRQ_OD */
+#define WM831X_IRQ_OD_WIDTH 1 /* IRQ_OD */
+#define WM831X_IM_IRQ 0x0001 /* IM_IRQ */
+#define WM831X_IM_IRQ_MASK 0x0001 /* IM_IRQ */
+#define WM831X_IM_IRQ_SHIFT 0 /* IM_IRQ */
+#define WM831X_IM_IRQ_WIDTH 1 /* IM_IRQ */
+
+/*
+ * R16408 (0x4018) - System Interrupts Mask
+ */
+#define WM831X_IM_PS_INT 0x8000 /* IM_PS_INT */
+#define WM831X_IM_PS_INT_MASK 0x8000 /* IM_PS_INT */
+#define WM831X_IM_PS_INT_SHIFT 15 /* IM_PS_INT */
+#define WM831X_IM_PS_INT_WIDTH 1 /* IM_PS_INT */
+#define WM831X_IM_TEMP_INT 0x4000 /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_MASK 0x4000 /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_SHIFT 14 /* IM_TEMP_INT */
+#define WM831X_IM_TEMP_INT_WIDTH 1 /* IM_TEMP_INT */
+#define WM831X_IM_GP_INT 0x2000 /* IM_GP_INT */
+#define WM831X_IM_GP_INT_MASK 0x2000 /* IM_GP_INT */
+#define WM831X_IM_GP_INT_SHIFT 13 /* IM_GP_INT */
+#define WM831X_IM_GP_INT_WIDTH 1 /* IM_GP_INT */
+#define WM831X_IM_ON_PIN_INT 0x1000 /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_MASK 0x1000 /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_SHIFT 12 /* IM_ON_PIN_INT */
+#define WM831X_IM_ON_PIN_INT_WIDTH 1 /* IM_ON_PIN_INT */
+#define WM831X_IM_WDOG_INT 0x0800 /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_MASK 0x0800 /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_SHIFT 11 /* IM_WDOG_INT */
+#define WM831X_IM_WDOG_INT_WIDTH 1 /* IM_WDOG_INT */
+#define WM831X_IM_TCHDATA_INT 0x0400 /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_MASK 0x0400 /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_SHIFT 10 /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHDATA_INT_WIDTH 1 /* IM_TCHDATA_INT */
+#define WM831X_IM_TCHPD_INT 0x0200 /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_MASK 0x0200 /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_SHIFT 9 /* IM_TCHPD_INT */
+#define WM831X_IM_TCHPD_INT_WIDTH 1 /* IM_TCHPD_INT */
+#define WM831X_IM_AUXADC_INT 0x0100 /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_MASK 0x0100 /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_SHIFT 8 /* IM_AUXADC_INT */
+#define WM831X_IM_AUXADC_INT_WIDTH 1 /* IM_AUXADC_INT */
+#define WM831X_IM_PPM_INT 0x0080 /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_MASK 0x0080 /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_SHIFT 7 /* IM_PPM_INT */
+#define WM831X_IM_PPM_INT_WIDTH 1 /* IM_PPM_INT */
+#define WM831X_IM_CS_INT 0x0040 /* IM_CS_INT */
+#define WM831X_IM_CS_INT_MASK 0x0040 /* IM_CS_INT */
+#define WM831X_IM_CS_INT_SHIFT 6 /* IM_CS_INT */
+#define WM831X_IM_CS_INT_WIDTH 1 /* IM_CS_INT */
+#define WM831X_IM_RTC_INT 0x0020 /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_MASK 0x0020 /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_SHIFT 5 /* IM_RTC_INT */
+#define WM831X_IM_RTC_INT_WIDTH 1 /* IM_RTC_INT */
+#define WM831X_IM_OTP_INT 0x0010 /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_MASK 0x0010 /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_SHIFT 4 /* IM_OTP_INT */
+#define WM831X_IM_OTP_INT_WIDTH 1 /* IM_OTP_INT */
+#define WM831X_IM_CHILD_INT 0x0008 /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_MASK 0x0008 /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_SHIFT 3 /* IM_CHILD_INT */
+#define WM831X_IM_CHILD_INT_WIDTH 1 /* IM_CHILD_INT */
+#define WM831X_IM_CHG_INT 0x0004 /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_MASK 0x0004 /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_SHIFT 2 /* IM_CHG_INT */
+#define WM831X_IM_CHG_INT_WIDTH 1 /* IM_CHG_INT */
+#define WM831X_IM_HC_INT 0x0002 /* IM_HC_INT */
+#define WM831X_IM_HC_INT_MASK 0x0002 /* IM_HC_INT */
+#define WM831X_IM_HC_INT_SHIFT 1 /* IM_HC_INT */
+#define WM831X_IM_HC_INT_WIDTH 1 /* IM_HC_INT */
+#define WM831X_IM_UV_INT 0x0001 /* IM_UV_INT */
+#define WM831X_IM_UV_INT_MASK 0x0001 /* IM_UV_INT */
+#define WM831X_IM_UV_INT_SHIFT 0 /* IM_UV_INT */
+#define WM831X_IM_UV_INT_WIDTH 1 /* IM_UV_INT */
+
+/*
+ * R16409 (0x4019) - Interrupt Status 1 Mask
+ */
+#define WM831X_IM_PPM_SYSLO_EINT 0x8000 /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_MASK 0x8000 /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_SHIFT 15 /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_SYSLO_EINT_WIDTH 1 /* IM_PPM_SYSLO_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT 0x4000 /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_MASK 0x4000 /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_SHIFT 14 /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_PWR_SRC_EINT_WIDTH 1 /* IM_PPM_PWR_SRC_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT 0x2000 /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_MASK 0x2000 /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_SHIFT 13 /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_PPM_USB_CURR_EINT_WIDTH 1 /* IM_PPM_USB_CURR_EINT */
+#define WM831X_IM_ON_PIN_EINT 0x1000 /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_MASK 0x1000 /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_SHIFT 12 /* IM_ON_PIN_EINT */
+#define WM831X_IM_ON_PIN_EINT_WIDTH 1 /* IM_ON_PIN_EINT */
+#define WM831X_IM_WDOG_TO_EINT 0x0800 /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_MASK 0x0800 /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_SHIFT 11 /* IM_WDOG_TO_EINT */
+#define WM831X_IM_WDOG_TO_EINT_WIDTH 1 /* IM_WDOG_TO_EINT */
+#define WM831X_IM_TCHDATA_EINT 0x0400 /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_MASK 0x0400 /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_SHIFT 10 /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHDATA_EINT_WIDTH 1 /* IM_TCHDATA_EINT */
+#define WM831X_IM_TCHPD_EINT 0x0200 /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_MASK 0x0200 /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_SHIFT 9 /* IM_TCHPD_EINT */
+#define WM831X_IM_TCHPD_EINT_WIDTH 1 /* IM_TCHPD_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT 0x0100 /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_MASK 0x0100 /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_SHIFT 8 /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DATA_EINT_WIDTH 1 /* IM_AUXADC_DATA_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT 0x0080 /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_MASK 0x0080 /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_SHIFT 7 /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP4_EINT_WIDTH 1 /* IM_AUXADC_DCOMP4_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT 0x0040 /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_MASK 0x0040 /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_SHIFT 6 /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP3_EINT_WIDTH 1 /* IM_AUXADC_DCOMP3_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT 0x0020 /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_MASK 0x0020 /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_SHIFT 5 /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP2_EINT_WIDTH 1 /* IM_AUXADC_DCOMP2_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT 0x0010 /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_MASK 0x0010 /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_SHIFT 4 /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_AUXADC_DCOMP1_EINT_WIDTH 1 /* IM_AUXADC_DCOMP1_EINT */
+#define WM831X_IM_RTC_PER_EINT 0x0008 /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_MASK 0x0008 /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_SHIFT 3 /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_PER_EINT_WIDTH 1 /* IM_RTC_PER_EINT */
+#define WM831X_IM_RTC_ALM_EINT 0x0004 /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_MASK 0x0004 /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_SHIFT 2 /* IM_RTC_ALM_EINT */
+#define WM831X_IM_RTC_ALM_EINT_WIDTH 1 /* IM_RTC_ALM_EINT */
+#define WM831X_IM_TEMP_THW_EINT 0x0002 /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_MASK 0x0002 /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_SHIFT 1 /* IM_TEMP_THW_EINT */
+#define WM831X_IM_TEMP_THW_EINT_WIDTH 1 /* IM_TEMP_THW_EINT */
+
+/*
+ * R16410 (0x401A) - Interrupt Status 2 Mask
+ */
+#define WM831X_IM_CHG_BATT_HOT_EINT 0x8000 /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_MASK 0x8000 /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_SHIFT 15 /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_HOT_EINT_WIDTH 1 /* IM_CHG_BATT_HOT_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT 0x4000 /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_MASK 0x4000 /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_SHIFT 14 /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_COLD_EINT_WIDTH 1 /* IM_CHG_BATT_COLD_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT 0x2000 /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_MASK 0x2000 /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_SHIFT 13 /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_BATT_FAIL_EINT_WIDTH 1 /* IM_CHG_BATT_FAIL_EINT */
+#define WM831X_IM_CHG_OV_EINT 0x1000 /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_MASK 0x1000 /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_SHIFT 12 /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_OV_EINT_WIDTH 1 /* IM_CHG_OV_EINT */
+#define WM831X_IM_CHG_END_EINT 0x0800 /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_MASK 0x0800 /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_SHIFT 11 /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_END_EINT_WIDTH 1 /* IM_CHG_END_EINT */
+#define WM831X_IM_CHG_TO_EINT 0x0400 /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_MASK 0x0400 /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_SHIFT 10 /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_TO_EINT_WIDTH 1 /* IM_CHG_TO_EINT */
+#define WM831X_IM_CHG_MODE_EINT 0x0200 /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_MASK 0x0200 /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_SHIFT 9 /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_MODE_EINT_WIDTH 1 /* IM_CHG_MODE_EINT */
+#define WM831X_IM_CHG_START_EINT 0x0100 /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_MASK 0x0100 /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_SHIFT 8 /* IM_CHG_START_EINT */
+#define WM831X_IM_CHG_START_EINT_WIDTH 1 /* IM_CHG_START_EINT */
+#define WM831X_IM_CS2_EINT 0x0080 /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_MASK 0x0080 /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_SHIFT 7 /* IM_CS2_EINT */
+#define WM831X_IM_CS2_EINT_WIDTH 1 /* IM_CS2_EINT */
+#define WM831X_IM_CS1_EINT 0x0040 /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_MASK 0x0040 /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_SHIFT 6 /* IM_CS1_EINT */
+#define WM831X_IM_CS1_EINT_WIDTH 1 /* IM_CS1_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT 0x0020 /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_MASK 0x0020 /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_SHIFT 5 /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_CMD_END_EINT_WIDTH 1 /* IM_OTP_CMD_END_EINT */
+#define WM831X_IM_OTP_ERR_EINT 0x0010 /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_MASK 0x0010 /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_SHIFT 4 /* IM_OTP_ERR_EINT */
+#define WM831X_IM_OTP_ERR_EINT_WIDTH 1 /* IM_OTP_ERR_EINT */
+#define WM831X_IM_PS_POR_EINT 0x0004 /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_MASK 0x0004 /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_SHIFT 2 /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_POR_EINT_WIDTH 1 /* IM_PS_POR_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT 0x0002 /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_MASK 0x0002 /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_SHIFT 1 /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_SLEEP_OFF_EINT_WIDTH 1 /* IM_PS_SLEEP_OFF_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT 0x0001 /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_MASK 0x0001 /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_SHIFT 0 /* IM_PS_ON_WAKE_EINT */
+#define WM831X_IM_PS_ON_WAKE_EINT_WIDTH 1 /* IM_PS_ON_WAKE_EINT */
+
+/*
+ * R16411 (0x401B) - Interrupt Status 3 Mask
+ */
+#define WM831X_IM_UV_LDO10_EINT 0x0200 /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_MASK 0x0200 /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_SHIFT 9 /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO10_EINT_WIDTH 1 /* IM_UV_LDO10_EINT */
+#define WM831X_IM_UV_LDO9_EINT 0x0100 /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_MASK 0x0100 /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_SHIFT 8 /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO9_EINT_WIDTH 1 /* IM_UV_LDO9_EINT */
+#define WM831X_IM_UV_LDO8_EINT 0x0080 /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_MASK 0x0080 /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_SHIFT 7 /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO8_EINT_WIDTH 1 /* IM_UV_LDO8_EINT */
+#define WM831X_IM_UV_LDO7_EINT 0x0040 /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_MASK 0x0040 /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_SHIFT 6 /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO7_EINT_WIDTH 1 /* IM_UV_LDO7_EINT */
+#define WM831X_IM_UV_LDO6_EINT 0x0020 /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_MASK 0x0020 /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_SHIFT 5 /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO6_EINT_WIDTH 1 /* IM_UV_LDO6_EINT */
+#define WM831X_IM_UV_LDO5_EINT 0x0010 /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_MASK 0x0010 /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_SHIFT 4 /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO5_EINT_WIDTH 1 /* IM_UV_LDO5_EINT */
+#define WM831X_IM_UV_LDO4_EINT 0x0008 /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_MASK 0x0008 /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_SHIFT 3 /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO4_EINT_WIDTH 1 /* IM_UV_LDO4_EINT */
+#define WM831X_IM_UV_LDO3_EINT 0x0004 /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_MASK 0x0004 /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_SHIFT 2 /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO3_EINT_WIDTH 1 /* IM_UV_LDO3_EINT */
+#define WM831X_IM_UV_LDO2_EINT 0x0002 /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_MASK 0x0002 /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_SHIFT 1 /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO2_EINT_WIDTH 1 /* IM_UV_LDO2_EINT */
+#define WM831X_IM_UV_LDO1_EINT 0x0001 /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_MASK 0x0001 /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_SHIFT 0 /* IM_UV_LDO1_EINT */
+#define WM831X_IM_UV_LDO1_EINT_WIDTH 1 /* IM_UV_LDO1_EINT */
+
+/*
+ * R16412 (0x401C) - Interrupt Status 4 Mask
+ */
+#define WM831X_IM_HC_DC2_EINT 0x0200 /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_MASK 0x0200 /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_SHIFT 9 /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC2_EINT_WIDTH 1 /* IM_HC_DC2_EINT */
+#define WM831X_IM_HC_DC1_EINT 0x0100 /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_MASK 0x0100 /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_SHIFT 8 /* IM_HC_DC1_EINT */
+#define WM831X_IM_HC_DC1_EINT_WIDTH 1 /* IM_HC_DC1_EINT */
+#define WM831X_IM_UV_DC4_EINT 0x0008 /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_MASK 0x0008 /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_SHIFT 3 /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC4_EINT_WIDTH 1 /* IM_UV_DC4_EINT */
+#define WM831X_IM_UV_DC3_EINT 0x0004 /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_MASK 0x0004 /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_SHIFT 2 /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC3_EINT_WIDTH 1 /* IM_UV_DC3_EINT */
+#define WM831X_IM_UV_DC2_EINT 0x0002 /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_MASK 0x0002 /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_SHIFT 1 /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC2_EINT_WIDTH 1 /* IM_UV_DC2_EINT */
+#define WM831X_IM_UV_DC1_EINT 0x0001 /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_MASK 0x0001 /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_SHIFT 0 /* IM_UV_DC1_EINT */
+#define WM831X_IM_UV_DC1_EINT_WIDTH 1 /* IM_UV_DC1_EINT */
+
+/*
+ * R16413 (0x401D) - Interrupt Status 5 Mask
+ */
+#define WM831X_IM_GP16_EINT 0x8000 /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_MASK 0x8000 /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_SHIFT 15 /* IM_GP16_EINT */
+#define WM831X_IM_GP16_EINT_WIDTH 1 /* IM_GP16_EINT */
+#define WM831X_IM_GP15_EINT 0x4000 /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_MASK 0x4000 /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_SHIFT 14 /* IM_GP15_EINT */
+#define WM831X_IM_GP15_EINT_WIDTH 1 /* IM_GP15_EINT */
+#define WM831X_IM_GP14_EINT 0x2000 /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_MASK 0x2000 /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_SHIFT 13 /* IM_GP14_EINT */
+#define WM831X_IM_GP14_EINT_WIDTH 1 /* IM_GP14_EINT */
+#define WM831X_IM_GP13_EINT 0x1000 /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_MASK 0x1000 /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_SHIFT 12 /* IM_GP13_EINT */
+#define WM831X_IM_GP13_EINT_WIDTH 1 /* IM_GP13_EINT */
+#define WM831X_IM_GP12_EINT 0x0800 /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_MASK 0x0800 /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_SHIFT 11 /* IM_GP12_EINT */
+#define WM831X_IM_GP12_EINT_WIDTH 1 /* IM_GP12_EINT */
+#define WM831X_IM_GP11_EINT 0x0400 /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_MASK 0x0400 /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_SHIFT 10 /* IM_GP11_EINT */
+#define WM831X_IM_GP11_EINT_WIDTH 1 /* IM_GP11_EINT */
+#define WM831X_IM_GP10_EINT 0x0200 /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_MASK 0x0200 /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_SHIFT 9 /* IM_GP10_EINT */
+#define WM831X_IM_GP10_EINT_WIDTH 1 /* IM_GP10_EINT */
+#define WM831X_IM_GP9_EINT 0x0100 /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_MASK 0x0100 /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_SHIFT 8 /* IM_GP9_EINT */
+#define WM831X_IM_GP9_EINT_WIDTH 1 /* IM_GP9_EINT */
+#define WM831X_IM_GP8_EINT 0x0080 /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_MASK 0x0080 /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_SHIFT 7 /* IM_GP8_EINT */
+#define WM831X_IM_GP8_EINT_WIDTH 1 /* IM_GP8_EINT */
+#define WM831X_IM_GP7_EINT 0x0040 /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_MASK 0x0040 /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_SHIFT 6 /* IM_GP7_EINT */
+#define WM831X_IM_GP7_EINT_WIDTH 1 /* IM_GP7_EINT */
+#define WM831X_IM_GP6_EINT 0x0020 /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_MASK 0x0020 /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_SHIFT 5 /* IM_GP6_EINT */
+#define WM831X_IM_GP6_EINT_WIDTH 1 /* IM_GP6_EINT */
+#define WM831X_IM_GP5_EINT 0x0010 /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_MASK 0x0010 /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_SHIFT 4 /* IM_GP5_EINT */
+#define WM831X_IM_GP5_EINT_WIDTH 1 /* IM_GP5_EINT */
+#define WM831X_IM_GP4_EINT 0x0008 /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_MASK 0x0008 /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_SHIFT 3 /* IM_GP4_EINT */
+#define WM831X_IM_GP4_EINT_WIDTH 1 /* IM_GP4_EINT */
+#define WM831X_IM_GP3_EINT 0x0004 /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_MASK 0x0004 /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_SHIFT 2 /* IM_GP3_EINT */
+#define WM831X_IM_GP3_EINT_WIDTH 1 /* IM_GP3_EINT */
+#define WM831X_IM_GP2_EINT 0x0002 /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_MASK 0x0002 /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_SHIFT 1 /* IM_GP2_EINT */
+#define WM831X_IM_GP2_EINT_WIDTH 1 /* IM_GP2_EINT */
+#define WM831X_IM_GP1_EINT 0x0001 /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_MASK 0x0001 /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_SHIFT 0 /* IM_GP1_EINT */
+#define WM831X_IM_GP1_EINT_WIDTH 1 /* IM_GP1_EINT */
+
+
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 04/22] mfd: Add WM831x AUXADC support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (2 preceding siblings ...)
2009-07-27 13:45 ` [PATCH 03/22] mfd: Add WM831x interrupt support Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:45 ` [PATCH 05/22] mfd: Conditionally add WM831x backlight subdevice Mark Brown
` (18 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
The WM831x contains an auxiliary ADC with a number of switchable
inputs which is used to monitor some of the voltages and
temperatures in the system and has some external inputs which can be
used for machine specific purposes. Provide an API allowing drivers
to read values from the ADC.
An internal reference voltage is provided to allow callibration of
the ADC. This is used to calibrate the device at startup.
The hardware also supports continuous readings and digital comparators.
These are not yet supported by the driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 101 +++++++++++++++++
include/linux/mfd/wm831x/auxadc.h | 216 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/core.h | 2 +
3 files changed, 319 insertions(+), 0 deletions(-)
create mode 100644 include/linux/mfd/wm831x/auxadc.h
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index eb63d22..42bef1d 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -15,11 +15,14 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
#include <linux/mfd/core.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/auxadc.h>
enum wm831x_parent {
WM8310 = 0,
@@ -244,6 +247,103 @@ out:
}
EXPORT_SYMBOL_GPL(wm831x_set_bits);
+/**
+ * wm831x_auxadc_read: Read a value from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+ int tries = 10;
+ int ret, src;
+
+ mutex_lock(&wm831x->auxadc_lock);
+
+ ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+ WM831X_AUX_ENA, WM831X_AUX_ENA);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to enable AUXADC: %d\n", ret);
+ goto out;
+ }
+
+ /* We force a single source at present */
+ src = input;
+ ret = wm831x_reg_write(wm831x, WM831X_AUXADC_SOURCE,
+ 1 << src);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to set AUXADC source: %d\n", ret);
+ goto out;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL,
+ WM831X_AUX_CVT_ENA, WM831X_AUX_CVT_ENA);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to start AUXADC: %d\n", ret);
+ goto disable;
+ }
+
+ do {
+ msleep(1);
+
+ ret = wm831x_reg_read(wm831x, WM831X_AUXADC_CONTROL);
+ if (ret < 0)
+ ret = WM831X_AUX_CVT_ENA;
+ } while ((ret & WM831X_AUX_CVT_ENA) && --tries);
+
+ if (ret & WM831X_AUX_CVT_ENA) {
+ dev_err(wm831x->dev, "Timed out reading AUXADC\n");
+ ret = -EBUSY;
+ goto disable;
+ }
+
+ ret = wm831x_reg_read(wm831x, WM831X_AUXADC_DATA);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read AUXADC data: %d\n", ret);
+ } else {
+ src = ((ret & WM831X_AUX_DATA_SRC_MASK)
+ >> WM831X_AUX_DATA_SRC_SHIFT) - 1;
+
+ if (src == 14)
+ src = WM831X_AUX_CAL;
+
+ if (src != input) {
+ dev_err(wm831x->dev, "Data from source %d not %d\n",
+ src, input);
+ ret = -EINVAL;
+ } else {
+ ret &= WM831X_AUX_DATA_MASK;
+ }
+ }
+
+disable:
+ wm831x_set_bits(wm831x, WM831X_AUXADC_CONTROL, WM831X_AUX_ENA, 0);
+out:
+ mutex_unlock(&wm831x->auxadc_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read);
+
+/**
+ * wm831x_auxadc_read_uv: Read a voltage from the WM831x AUXADC
+ *
+ * @wm831x: Device to read from.
+ * @input: AUXADC input to read.
+ */
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input)
+{
+ int ret;
+
+ ret = wm831x_auxadc_read(wm831x, input);
+ if (ret < 0)
+ return ret;
+
+ ret *= 1465;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(wm831x_auxadc_read_uv);
+
static struct resource wm831x_dcdc1_resources[] = {
{
.start = WM831X_DC1_CONTROL_1,
@@ -1084,6 +1184,7 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
mutex_init(&wm831x->io_lock);
mutex_init(&wm831x->key_lock);
+ mutex_init(&wm831x->auxadc_lock);
dev_set_drvdata(wm831x->dev, wm831x);
ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h
new file mode 100644
index 0000000..b132067
--- /dev/null
+++ b/include/linux/mfd/wm831x/auxadc.h
@@ -0,0 +1,216 @@
+/*
+ * include/linux/mfd/wm831x/auxadc.h -- Auxiliary ADC interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_AUXADC_H__
+#define __MFD_WM831X_AUXADC_H__
+
+/*
+ * R16429 (0x402D) - AuxADC Data
+ */
+#define WM831X_AUX_DATA_SRC_MASK 0xF000 /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_SHIFT 12 /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_SRC_WIDTH 4 /* AUX_DATA_SRC - [15:12] */
+#define WM831X_AUX_DATA_MASK 0x0FFF /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_SHIFT 0 /* AUX_DATA - [11:0] */
+#define WM831X_AUX_DATA_WIDTH 12 /* AUX_DATA - [11:0] */
+
+/*
+ * R16430 (0x402E) - AuxADC Control
+ */
+#define WM831X_AUX_ENA 0x8000 /* AUX_ENA */
+#define WM831X_AUX_ENA_MASK 0x8000 /* AUX_ENA */
+#define WM831X_AUX_ENA_SHIFT 15 /* AUX_ENA */
+#define WM831X_AUX_ENA_WIDTH 1 /* AUX_ENA */
+#define WM831X_AUX_CVT_ENA 0x4000 /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_MASK 0x4000 /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_SHIFT 14 /* AUX_CVT_ENA */
+#define WM831X_AUX_CVT_ENA_WIDTH 1 /* AUX_CVT_ENA */
+#define WM831X_AUX_SLPENA 0x1000 /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_MASK 0x1000 /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_SHIFT 12 /* AUX_SLPENA */
+#define WM831X_AUX_SLPENA_WIDTH 1 /* AUX_SLPENA */
+#define WM831X_AUX_FRC_ENA 0x0800 /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_MASK 0x0800 /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_SHIFT 11 /* AUX_FRC_ENA */
+#define WM831X_AUX_FRC_ENA_WIDTH 1 /* AUX_FRC_ENA */
+#define WM831X_AUX_RATE_MASK 0x003F /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_SHIFT 0 /* AUX_RATE - [5:0] */
+#define WM831X_AUX_RATE_WIDTH 6 /* AUX_RATE - [5:0] */
+
+/*
+ * R16431 (0x402F) - AuxADC Source
+ */
+#define WM831X_AUX_CAL_SEL 0x8000 /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_MASK 0x8000 /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_SHIFT 15 /* AUX_CAL_SEL */
+#define WM831X_AUX_CAL_SEL_WIDTH 1 /* AUX_CAL_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL 0x0400 /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_MASK 0x0400 /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_SHIFT 10 /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_BKUP_BATT_SEL_WIDTH 1 /* AUX_BKUP_BATT_SEL */
+#define WM831X_AUX_WALL_SEL 0x0200 /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_MASK 0x0200 /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_SHIFT 9 /* AUX_WALL_SEL */
+#define WM831X_AUX_WALL_SEL_WIDTH 1 /* AUX_WALL_SEL */
+#define WM831X_AUX_BATT_SEL 0x0100 /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_MASK 0x0100 /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_SHIFT 8 /* AUX_BATT_SEL */
+#define WM831X_AUX_BATT_SEL_WIDTH 1 /* AUX_BATT_SEL */
+#define WM831X_AUX_USB_SEL 0x0080 /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_MASK 0x0080 /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_SHIFT 7 /* AUX_USB_SEL */
+#define WM831X_AUX_USB_SEL_WIDTH 1 /* AUX_USB_SEL */
+#define WM831X_AUX_SYSVDD_SEL 0x0040 /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_MASK 0x0040 /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_SHIFT 6 /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_SYSVDD_SEL_WIDTH 1 /* AUX_SYSVDD_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL 0x0020 /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_MASK 0x0020 /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_SHIFT 5 /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_BATT_TEMP_SEL_WIDTH 1 /* AUX_BATT_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL 0x0010 /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_MASK 0x0010 /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_SHIFT 4 /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_CHIP_TEMP_SEL_WIDTH 1 /* AUX_CHIP_TEMP_SEL */
+#define WM831X_AUX_AUX4_SEL 0x0008 /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_MASK 0x0008 /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_SHIFT 3 /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX4_SEL_WIDTH 1 /* AUX_AUX4_SEL */
+#define WM831X_AUX_AUX3_SEL 0x0004 /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_MASK 0x0004 /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_SHIFT 2 /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX3_SEL_WIDTH 1 /* AUX_AUX3_SEL */
+#define WM831X_AUX_AUX2_SEL 0x0002 /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_MASK 0x0002 /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_SHIFT 1 /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX2_SEL_WIDTH 1 /* AUX_AUX2_SEL */
+#define WM831X_AUX_AUX1_SEL 0x0001 /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_MASK 0x0001 /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_SHIFT 0 /* AUX_AUX1_SEL */
+#define WM831X_AUX_AUX1_SEL_WIDTH 1 /* AUX_AUX1_SEL */
+
+/*
+ * R16432 (0x4030) - Comparator Control
+ */
+#define WM831X_DCOMP4_STS 0x0800 /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_MASK 0x0800 /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_SHIFT 11 /* DCOMP4_STS */
+#define WM831X_DCOMP4_STS_WIDTH 1 /* DCOMP4_STS */
+#define WM831X_DCOMP3_STS 0x0400 /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_MASK 0x0400 /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_SHIFT 10 /* DCOMP3_STS */
+#define WM831X_DCOMP3_STS_WIDTH 1 /* DCOMP3_STS */
+#define WM831X_DCOMP2_STS 0x0200 /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_MASK 0x0200 /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_SHIFT 9 /* DCOMP2_STS */
+#define WM831X_DCOMP2_STS_WIDTH 1 /* DCOMP2_STS */
+#define WM831X_DCOMP1_STS 0x0100 /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_MASK 0x0100 /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_SHIFT 8 /* DCOMP1_STS */
+#define WM831X_DCOMP1_STS_WIDTH 1 /* DCOMP1_STS */
+#define WM831X_DCMP4_ENA 0x0008 /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_MASK 0x0008 /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_SHIFT 3 /* DCMP4_ENA */
+#define WM831X_DCMP4_ENA_WIDTH 1 /* DCMP4_ENA */
+#define WM831X_DCMP3_ENA 0x0004 /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_MASK 0x0004 /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_SHIFT 2 /* DCMP3_ENA */
+#define WM831X_DCMP3_ENA_WIDTH 1 /* DCMP3_ENA */
+#define WM831X_DCMP2_ENA 0x0002 /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_MASK 0x0002 /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_SHIFT 1 /* DCMP2_ENA */
+#define WM831X_DCMP2_ENA_WIDTH 1 /* DCMP2_ENA */
+#define WM831X_DCMP1_ENA 0x0001 /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_MASK 0x0001 /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_SHIFT 0 /* DCMP1_ENA */
+#define WM831X_DCMP1_ENA_WIDTH 1 /* DCMP1_ENA */
+
+/*
+ * R16433 (0x4031) - Comparator 1
+ */
+#define WM831X_DCMP1_SRC_MASK 0xE000 /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_SHIFT 13 /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_SRC_WIDTH 3 /* DCMP1_SRC - [15:13] */
+#define WM831X_DCMP1_GT 0x1000 /* DCMP1_GT */
+#define WM831X_DCMP1_GT_MASK 0x1000 /* DCMP1_GT */
+#define WM831X_DCMP1_GT_SHIFT 12 /* DCMP1_GT */
+#define WM831X_DCMP1_GT_WIDTH 1 /* DCMP1_GT */
+#define WM831X_DCMP1_THR_MASK 0x0FFF /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_SHIFT 0 /* DCMP1_THR - [11:0] */
+#define WM831X_DCMP1_THR_WIDTH 12 /* DCMP1_THR - [11:0] */
+
+/*
+ * R16434 (0x4032) - Comparator 2
+ */
+#define WM831X_DCMP2_SRC_MASK 0xE000 /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_SHIFT 13 /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_SRC_WIDTH 3 /* DCMP2_SRC - [15:13] */
+#define WM831X_DCMP2_GT 0x1000 /* DCMP2_GT */
+#define WM831X_DCMP2_GT_MASK 0x1000 /* DCMP2_GT */
+#define WM831X_DCMP2_GT_SHIFT 12 /* DCMP2_GT */
+#define WM831X_DCMP2_GT_WIDTH 1 /* DCMP2_GT */
+#define WM831X_DCMP2_THR_MASK 0x0FFF /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_SHIFT 0 /* DCMP2_THR - [11:0] */
+#define WM831X_DCMP2_THR_WIDTH 12 /* DCMP2_THR - [11:0] */
+
+/*
+ * R16435 (0x4033) - Comparator 3
+ */
+#define WM831X_DCMP3_SRC_MASK 0xE000 /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_SHIFT 13 /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_SRC_WIDTH 3 /* DCMP3_SRC - [15:13] */
+#define WM831X_DCMP3_GT 0x1000 /* DCMP3_GT */
+#define WM831X_DCMP3_GT_MASK 0x1000 /* DCMP3_GT */
+#define WM831X_DCMP3_GT_SHIFT 12 /* DCMP3_GT */
+#define WM831X_DCMP3_GT_WIDTH 1 /* DCMP3_GT */
+#define WM831X_DCMP3_THR_MASK 0x0FFF /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_SHIFT 0 /* DCMP3_THR - [11:0] */
+#define WM831X_DCMP3_THR_WIDTH 12 /* DCMP3_THR - [11:0] */
+
+/*
+ * R16436 (0x4034) - Comparator 4
+ */
+#define WM831X_DCMP4_SRC_MASK 0xE000 /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_SHIFT 13 /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_SRC_WIDTH 3 /* DCMP4_SRC - [15:13] */
+#define WM831X_DCMP4_GT 0x1000 /* DCMP4_GT */
+#define WM831X_DCMP4_GT_MASK 0x1000 /* DCMP4_GT */
+#define WM831X_DCMP4_GT_SHIFT 12 /* DCMP4_GT */
+#define WM831X_DCMP4_GT_WIDTH 1 /* DCMP4_GT */
+#define WM831X_DCMP4_THR_MASK 0x0FFF /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_SHIFT 0 /* DCMP4_THR - [11:0] */
+#define WM831X_DCMP4_THR_WIDTH 12 /* DCMP4_THR - [11:0] */
+
+#define WM831X_AUX_CAL_FACTOR 0xfff
+#define WM831X_AUX_CAL_NOMINAL 0x222
+
+enum wm831x_auxadc {
+ WM831X_AUX_CAL = 15,
+ WM831X_AUX_BKUP_BATT = 10,
+ WM831X_AUX_WALL = 9,
+ WM831X_AUX_BATT = 8,
+ WM831X_AUX_USB = 7,
+ WM831X_AUX_SYSVDD = 6,
+ WM831X_AUX_BATT_TEMP = 5,
+ WM831X_AUX_CHIP_TEMP = 4,
+ WM831X_AUX_AUX4 = 3,
+ WM831X_AUX_AUX3 = 2,
+ WM831X_AUX_AUX2 = 1,
+ WM831X_AUX_AUX1 = 0,
+};
+
+int wm831x_auxadc_read(struct wm831x *wm831x, enum wm831x_auxadc input);
+int wm831x_auxadc_read_uv(struct wm831x *wm831x, enum wm831x_auxadc input);
+
+#endif
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index b96c935..d7134df 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -234,6 +234,8 @@ struct wm831x {
unsigned int irq_base;
int irq_masks[5];
+ struct mutex auxadc_lock;
+
/* The WM831x has a security key blocking access to certain
* registers. The mutex is taken by the accessors for locking
* and unlocking the security key, locked is used to fail
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 05/22] mfd: Conditionally add WM831x backlight subdevice
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (3 preceding siblings ...)
2009-07-27 13:45 ` [PATCH 04/22] mfd: Add WM831x AUXADC support Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:45 ` [PATCH 06/22] mfd: Add basic WM831x OTP support Mark Brown
` (17 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
The WM831x backlight driver requires at least the specification of the
current sink to use and a maximum current to allow them to function and
will actively interfere with other users of the regulators it uses if
misconfigured so only register the subdevice for it if this platform
data has been supplied.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 15 +++++++++++++++
include/linux/mfd/wm831x/pdata.h | 6 ++++++
2 files changed, 21 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 42bef1d..bc40ea3 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -1172,6 +1172,12 @@ static struct mfd_cell wm8312_devs[] = {
},
};
+static struct mfd_cell backlight_devs[] = {
+ {
+ .name = "wm831x-backlight",
+ },
+};
+
/*
* Instantiate the generic non-control parts of the device.
*/
@@ -1325,6 +1331,15 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
goto err_irq;
}
+ if (pdata && pdata->backlight) {
+ /* Treat errors as non-critical */
+ ret = mfd_add_devices(wm831x->dev, -1, backlight_devs,
+ ARRAY_SIZE(backlight_devs), NULL, 0);
+ if (ret < 0)
+ dev_err(wm831x->dev, "Failed to add backlight: %d\n",
+ ret);
+ }
+
if (pdata && pdata->post_init) {
ret = pdata->post_init(wm831x);
if (ret != 0) {
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index 571e601..90d8202 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -18,6 +18,11 @@
struct wm831x;
struct regulator_init_data;
+struct wm831x_backlight_pdata {
+ int isink; /** ISINK to use, 1 or 2 */
+ int max_uA; /** Maximum current to allow */
+};
+
struct wm831x_backup_pdata {
int charger_enable;
int no_constant_voltage; /** Disable constant voltage charging */
@@ -87,6 +92,7 @@ struct wm831x_pdata {
int (*post_init)(struct wm831x *wm831x);
int gpio_base;
+ struct wm831x_backlight_pdata *backlight;
struct wm831x_backup_pdata *backup;
struct wm831x_battery_pdata *battery;
struct wm831x_touch_pdata *touch;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 06/22] mfd: Add basic WM831x OTP support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (4 preceding siblings ...)
2009-07-27 13:45 ` [PATCH 05/22] mfd: Conditionally add WM831x backlight subdevice Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:45 ` [PATCH 07/22] mfd: Export ISEL values from WM831x core Mark Brown
` (16 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
The WM831x series of devices use OTP (One Time Programmable, a type
of PROM) to store system configuration. At run time this data is
visible via registers.
Currently the only explicitly supported feature is that the unique
ID provided by every WM831x device is exported to user space via
sysfs. Other configuration data may be read by system-specific
code in the pre_init() and post_init() platform data operations.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 4 +
drivers/mfd/wm831x-otp.c | 83 ++++++++++++++++++++
include/linux/mfd/wm831x/otp.h | 162 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 249 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/wm831x-otp.c
create mode 100644 include/linux/mfd/wm831x/otp.h
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index bc40ea3..33eaea2 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -23,6 +23,7 @@
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/otp.h>
enum wm831x_parent {
WM8310 = 0,
@@ -1340,6 +1341,8 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)
ret);
}
+ wm831x_otp_init(wm831x);
+
if (pdata && pdata->post_init) {
ret = pdata->post_init(wm831x);
if (ret != 0) {
@@ -1360,6 +1363,7 @@ err:
static void wm831x_device_exit(struct wm831x *wm831x)
{
+ wm831x_otp_exit(wm831x);
mfd_remove_devices(wm831x->dev);
wm831x_irq_exit(wm831x);
kfree(wm831x);
diff --git a/drivers/mfd/wm831x-otp.c b/drivers/mfd/wm831x-otp.c
new file mode 100644
index 0000000..f742745
--- /dev/null
+++ b/drivers/mfd/wm831x-otp.c
@@ -0,0 +1,83 @@
+/*
+ * wm831x-otp.c -- OTP for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/bcd.h>
+#include <linux/delay.h>
+#include <linux/mfd/core.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/otp.h>
+
+/* In bytes */
+#define WM831X_UNIQUE_ID_LEN 16
+
+/* Read the unique ID from the chip into id */
+static int wm831x_unique_id_read(struct wm831x *wm831x, char *id)
+{
+ int i, val;
+
+ for (i = 0; i < WM831X_UNIQUE_ID_LEN / 2; i++) {
+ val = wm831x_reg_read(wm831x, WM831X_UNIQUE_ID_1 + i);
+ if (val < 0)
+ return val;
+
+ id[i * 2] = (val >> 8) & 0xff;
+ id[(i * 2) + 1] = val & 0xff;
+ }
+
+ return 0;
+}
+
+static ssize_t wm831x_unique_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x *wm831x = dev_get_drvdata(dev);
+ int i, rval;
+ char id[WM831X_UNIQUE_ID_LEN];
+ ssize_t ret = 0;
+
+ rval = wm831x_unique_id_read(wm831x, id);
+ if (rval < 0)
+ return 0;
+
+ for (i = 0; i < WM831X_UNIQUE_ID_LEN; i++)
+ ret += sprintf(&buf[ret], "%02x", buf[i]);
+
+ ret += sprintf(&buf[ret], "\n");
+
+ return ret;
+}
+
+static DEVICE_ATTR(unique_id, 0444, wm831x_unique_id_show, NULL);
+
+int wm831x_otp_init(struct wm831x *wm831x)
+{
+ int ret;
+
+ ret = device_create_file(wm831x->dev, &dev_attr_unique_id);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Unique ID attribute not created: %d\n",
+ ret);
+
+ return ret;
+}
+
+void wm831x_otp_exit(struct wm831x *wm831x)
+{
+ device_remove_file(wm831x->dev, &dev_attr_unique_id);
+}
+
diff --git a/include/linux/mfd/wm831x/otp.h b/include/linux/mfd/wm831x/otp.h
new file mode 100644
index 0000000..ce1f81a
--- /dev/null
+++ b/include/linux/mfd/wm831x/otp.h
@@ -0,0 +1,162 @@
+/*
+ * include/linux/mfd/wm831x/otp.h -- OTP interface for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_OTP_H__
+#define __MFD_WM831X_OTP_H__
+
+int wm831x_otp_init(struct wm831x *wm831x);
+void wm831x_otp_exit(struct wm831x *wm831x);
+
+/*
+ * R30720 (0x7800) - Unique ID 1
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30721 (0x7801) - Unique ID 2
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30722 (0x7802) - Unique ID 3
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30723 (0x7803) - Unique ID 4
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30724 (0x7804) - Unique ID 5
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30725 (0x7805) - Unique ID 6
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30726 (0x7806) - Unique ID 7
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30727 (0x7807) - Unique ID 8
+ */
+#define WM831X_UNIQUE_ID_MASK 0xFFFF /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_SHIFT 0 /* UNIQUE_ID - [15:0] */
+#define WM831X_UNIQUE_ID_WIDTH 16 /* UNIQUE_ID - [15:0] */
+
+/*
+ * R30728 (0x7808) - Factory OTP ID
+ */
+#define WM831X_OTP_FACT_ID_MASK 0xFFFE /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_SHIFT 1 /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_ID_WIDTH 15 /* OTP_FACT_ID - [15:1] */
+#define WM831X_OTP_FACT_FINAL 0x0001 /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_MASK 0x0001 /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_SHIFT 0 /* OTP_FACT_FINAL */
+#define WM831X_OTP_FACT_FINAL_WIDTH 1 /* OTP_FACT_FINAL */
+
+/*
+ * R30729 (0x7809) - Factory OTP 1
+ */
+#define WM831X_DC3_TRIM_MASK 0xF000 /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_SHIFT 12 /* DC3_TRIM - [15:12] */
+#define WM831X_DC3_TRIM_WIDTH 4 /* DC3_TRIM - [15:12] */
+#define WM831X_DC2_TRIM_MASK 0x0FC0 /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_SHIFT 6 /* DC2_TRIM - [11:6] */
+#define WM831X_DC2_TRIM_WIDTH 6 /* DC2_TRIM - [11:6] */
+#define WM831X_DC1_TRIM_MASK 0x003F /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_SHIFT 0 /* DC1_TRIM - [5:0] */
+#define WM831X_DC1_TRIM_WIDTH 6 /* DC1_TRIM - [5:0] */
+
+/*
+ * R30730 (0x780A) - Factory OTP 2
+ */
+#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */
+#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */
+
+/*
+ * R30731 (0x780B) - Factory OTP 3
+ */
+#define WM831X_OSC_TRIM_MASK 0x0780 /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_SHIFT 7 /* OSC_TRIM - [10:7] */
+#define WM831X_OSC_TRIM_WIDTH 4 /* OSC_TRIM - [10:7] */
+#define WM831X_BG_TRIM_MASK 0x0078 /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_SHIFT 3 /* BG_TRIM - [6:3] */
+#define WM831X_BG_TRIM_WIDTH 4 /* BG_TRIM - [6:3] */
+#define WM831X_LPBG_TRIM_MASK 0x0007 /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_SHIFT 0 /* LPBG_TRIM - [2:0] */
+#define WM831X_LPBG_TRIM_WIDTH 3 /* LPBG_TRIM - [2:0] */
+
+/*
+ * R30732 (0x780C) - Factory OTP 4
+ */
+#define WM831X_CHILD_I2C_ADDR_MASK 0x00FE /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_SHIFT 1 /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CHILD_I2C_ADDR_WIDTH 7 /* CHILD_I2C_ADDR - [7:1] */
+#define WM831X_CH_AW 0x0001 /* CH_AW */
+#define WM831X_CH_AW_MASK 0x0001 /* CH_AW */
+#define WM831X_CH_AW_SHIFT 0 /* CH_AW */
+#define WM831X_CH_AW_WIDTH 1 /* CH_AW */
+
+/*
+ * R30733 (0x780D) - Factory OTP 5
+ */
+#define WM831X_CHARGE_TRIM_MASK 0x003F /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_SHIFT 0 /* CHARGE_TRIM - [5:0] */
+#define WM831X_CHARGE_TRIM_WIDTH 6 /* CHARGE_TRIM - [5:0] */
+
+/*
+ * R30736 (0x7810) - Customer OTP ID
+ */
+#define WM831X_OTP_AUTO_PROG 0x8000 /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_MASK 0x8000 /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_SHIFT 15 /* OTP_AUTO_PROG */
+#define WM831X_OTP_AUTO_PROG_WIDTH 1 /* OTP_AUTO_PROG */
+#define WM831X_OTP_CUST_ID_MASK 0x7FFE /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_SHIFT 1 /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_ID_WIDTH 14 /* OTP_CUST_ID - [14:1] */
+#define WM831X_OTP_CUST_FINAL 0x0001 /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_MASK 0x0001 /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_SHIFT 0 /* OTP_CUST_FINAL */
+#define WM831X_OTP_CUST_FINAL_WIDTH 1 /* OTP_CUST_FINAL */
+
+/*
+ * R30759 (0x7827) - DBE CHECK DATA
+ */
+#define WM831X_DBE_VALID_DATA_MASK 0xFFFF /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_SHIFT 0 /* DBE_VALID_DATA - [15:0] */
+#define WM831X_DBE_VALID_DATA_WIDTH 16 /* DBE_VALID_DATA - [15:0] */
+
+
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 07/22] mfd: Export ISEL values from WM831x core
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (5 preceding siblings ...)
2009-07-27 13:45 ` [PATCH 06/22] mfd: Add basic WM831x OTP support Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:45 ` [PATCH 08/22] mfd: Hook WM831x into build system Mark Brown
` (15 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
The current settings which can be used with the WM831x current sinks
can't easily be mapped between register values and currents at run
time without a lookup table since the values scale logarithmically
to match the way the human eye interprets brightness. This lookup
table is inclided in the core since several drivers need to use it.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 64 ++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/regulator.h | 21 +++++++++++
2 files changed, 85 insertions(+), 0 deletions(-)
create mode 100644 include/linux/mfd/wm831x/regulator.h
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 33eaea2..49b7885 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -24,6 +24,70 @@
#include <linux/mfd/wm831x/irq.h>
#include <linux/mfd/wm831x/auxadc.h>
#include <linux/mfd/wm831x/otp.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+/* Current settings - values are 2*2^(reg_val/4) microamps. These are
+ * exported since they are used by multiple drivers.
+ */
+int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL] = {
+ 2,
+ 2,
+ 3,
+ 3,
+ 4,
+ 5,
+ 6,
+ 7,
+ 8,
+ 10,
+ 11,
+ 13,
+ 16,
+ 19,
+ 23,
+ 27,
+ 32,
+ 38,
+ 45,
+ 54,
+ 64,
+ 76,
+ 91,
+ 108,
+ 128,
+ 152,
+ 181,
+ 215,
+ 256,
+ 304,
+ 362,
+ 431,
+ 512,
+ 609,
+ 724,
+ 861,
+ 1024,
+ 1218,
+ 1448,
+ 1722,
+ 2048,
+ 2435,
+ 2896,
+ 3444,
+ 4096,
+ 4871,
+ 5793,
+ 6889,
+ 8192,
+ 9742,
+ 11585,
+ 13777,
+ 16384,
+ 19484,
+ 23170,
+ 27554,
+};
+EXPORT_SYMBOL_GPL(wm831x_isinkv_values);
enum wm831x_parent {
WM8310 = 0,
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
new file mode 100644
index 0000000..b5d58fb
--- /dev/null
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -0,0 +1,21 @@
+/*
+ * linux/mfd/wm831x/regulator.h -- Regulator definitons for wm831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_REGULATOR_H__
+#define __MFD_WM831X_REGULATOR_H__
+
+#define WM831X_ISINK_MAX_ISEL 56
+extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
+
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 08/22] mfd: Hook WM831x into build system
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (6 preceding siblings ...)
2009-07-27 13:45 ` [PATCH 07/22] mfd: Export ISEL values from WM831x core Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:45 ` [PATCH 09/22] backlight: Add WM831x backlight driver Mark Brown
` (14 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/Kconfig | 10 ++++++++++
drivers/mfd/Makefile | 2 ++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 491ac0f..0273456 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -157,6 +157,16 @@ config MFD_WM8400
the device, additional drivers must be enabled in order to use
the functionality of the device.
+config MFD_WM831X
+ tristate "Support Wolfson Microelectronics WM831x PMICs"
+ select MFD_CORE
+ depends on I2C
+ help
+ Support for the Wolfson Microelecronics WM831x PMICs. This
+ driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_WM8350
tristate
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 6f8a9a1..285cb32 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -15,6 +15,8 @@ obj-$(CONFIG_MFD_TC6387XB) += tc6387xb.o
obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o
obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
+wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
+obj-$(CONFIG_MFD_WM831X) += wm831x.o
wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
obj-$(CONFIG_MFD_WM8350) += wm8350.o
obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 09/22] backlight: Add WM831x backlight driver
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (7 preceding siblings ...)
2009-07-27 13:45 ` [PATCH 08/22] mfd: Hook WM831x into build system Mark Brown
@ 2009-07-27 13:45 ` Mark Brown
2009-07-27 13:46 ` [PATCH 10/22] gpio: Add WM831X GPIO driver Mark Brown
` (13 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:45 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Richard Purdie
The WM831x series of PMICs provide DC-DC boost convertors and current
sinks which can be used together to drive LEDs for use as backlights.
Expose this functionality via the backlight API.
Since when used in this configuration the current sink and boost
convertor are very tightly coupled with a multi-stage startup for
the current sink which overlaps with the boost convertor startup
this driver bypasses the regulator API. Machine inititialisation
is responsible for ensuring that the regulators are not accessed
via both APIs.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
drivers/video/backlight/Kconfig | 7 +
drivers/video/backlight/Makefile | 1 +
drivers/video/backlight/wm831x_bl.c | 250 +++++++++++++++++++++++++++++++++++
3 files changed, 258 insertions(+), 0 deletions(-)
create mode 100644 drivers/video/backlight/wm831x_bl.c
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 90861cd..205de1a 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -229,3 +229,10 @@ config BACKLIGHT_SAHARA
help
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
backlight driver.
+
+config BACKLIGHT_WM831X
+ tristate "WM831x PMIC Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
+ help
+ If you have a backlight driven by the ISINK and DCDC of a
+ WM831x PMIC say y to enable the backlight driver for it.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 4eb178c..df0b67c 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -24,4 +24,5 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o
obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c
new file mode 100644
index 0000000..467bdb7
--- /dev/null
+++ b/drivers/video/backlight/wm831x_bl.c
@@ -0,0 +1,250 @@
+/*
+ * Backlight driver for Wolfson Microelectronics WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectonics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+struct wm831x_backlight_data {
+ struct wm831x *wm831x;
+ int isink_reg;
+ int current_brightness;
+};
+
+static int wm831x_backlight_set(struct backlight_device *bl, int brightness)
+{
+ struct wm831x_backlight_data *data = bl_get_data(bl);
+ struct wm831x *wm831x = data->wm831x;
+ int power_up = !data->current_brightness && brightness;
+ int power_down = data->current_brightness && !brightness;
+ int ret;
+
+ if (power_up) {
+ /* Enable the ISINK */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_ENA, WM831X_CS1_ENA);
+ if (ret < 0)
+ goto err;
+
+ /* Enable the DC-DC */
+ ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+ WM831X_DC4_ENA, WM831X_DC4_ENA);
+ if (ret < 0)
+ goto err;
+ }
+
+ if (power_down) {
+ /* DCDC first */
+ ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+ WM831X_DC4_ENA, 0);
+ if (ret < 0)
+ goto err;
+
+ /* ISINK */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0);
+ if (ret < 0)
+ goto err;
+ }
+
+ /* Set the new brightness */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_ISEL_MASK, brightness);
+ if (ret < 0)
+ goto err;
+
+ if (power_up) {
+ /* Drive current through the ISINK */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_DRIVE, WM831X_CS1_DRIVE);
+ if (ret < 0)
+ return ret;
+ }
+
+ data->current_brightness = brightness;
+
+ return 0;
+
+err:
+ /* If we were in the middle of a power transition always shut down
+ * for safety.
+ */
+ if (power_up || power_down) {
+ wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+ wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0);
+ }
+
+ return ret;
+}
+
+static int wm831x_backlight_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.state & BL_CORE_SUSPENDED)
+ brightness = 0;
+
+ return wm831x_backlight_set(bl, brightness);
+}
+
+static int wm831x_backlight_get_brightness(struct backlight_device *bl)
+{
+ struct wm831x_backlight_data *data = bl_get_data(bl);
+ return data->current_brightness;
+}
+
+static struct backlight_ops wm831x_backlight_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = wm831x_backlight_update_status,
+ .get_brightness = wm831x_backlight_get_brightness,
+};
+
+static int wm831x_backlight_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *wm831x_pdata;
+ struct wm831x_backlight_pdata *pdata;
+ struct wm831x_backlight_data *data;
+ struct backlight_device *bl;
+ int ret, i, max_isel, isink_reg, dcdc_cfg;
+
+ /* We need platform data */
+ if (pdev->dev.parent->platform_data) {
+ wm831x_pdata = pdev->dev.parent->platform_data;
+ pdata = wm831x_pdata->backlight;
+ } else {
+ pdata = NULL;
+ }
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data supplied\n");
+ return -EINVAL;
+ }
+
+ /* Figure out the maximum current we can use */
+ for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) {
+ if (wm831x_isinkv_values[i] > pdata->max_uA)
+ break;
+ }
+
+ if (i == 0) {
+ dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA);
+ return -EINVAL;
+ }
+ max_isel = i - 1;
+
+ if (pdata->max_uA != wm831x_isinkv_values[max_isel])
+ dev_warn(&pdev->dev,
+ "Maximum current is %duA not %duA as requested\n",
+ wm831x_isinkv_values[max_isel], pdata->max_uA);
+
+ switch (pdata->isink) {
+ case 1:
+ isink_reg = WM831X_CURRENT_SINK_1;
+ dcdc_cfg = 0;
+ break;
+ case 2:
+ isink_reg = WM831X_CURRENT_SINK_2;
+ dcdc_cfg = WM831X_DC4_FBSRC;
+ break;
+ default:
+ dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink);
+ return -EINVAL;
+ }
+
+ /* Configure the ISINK to use for feedback */
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC,
+ dcdc_cfg);
+
+ wm831x_reg_lock(wm831x);
+ if (ret < 0)
+ return ret;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->wm831x = wm831x;
+ data->current_brightness = 0;
+ data->isink_reg = isink_reg;
+
+ bl = backlight_device_register("wm831x", &pdev->dev,
+ data, &wm831x_backlight_ops);
+ if (IS_ERR(bl)) {
+ dev_err(&pdev->dev, "failed to register backlight\n");
+ kfree(data);
+ return PTR_ERR(bl);
+ }
+
+ bl->props.max_brightness = max_isel;
+ bl->props.brightness = max_isel;
+
+ platform_set_drvdata(pdev, bl);
+
+ /* Disable the DCDC if it was started so we can bootstrap */
+ wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+
+
+ backlight_update_status(bl);
+
+ return 0;
+}
+
+static int wm831x_backlight_remove(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct wm831x_backlight_data *data = bl_get_data(bl);
+
+ backlight_device_unregister(bl);
+ kfree(data);
+ return 0;
+}
+
+static struct platform_driver wm831x_backlight_driver = {
+ .driver = {
+ .name = "wm831x-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_backlight_probe,
+ .remove = wm831x_backlight_remove,
+};
+
+static int __init wm831x_backlight_init(void)
+{
+ return platform_driver_register(&wm831x_backlight_driver);
+}
+module_init(wm831x_backlight_init);
+
+static void __exit wm831x_backlight_exit(void)
+{
+ platform_driver_unregister(&wm831x_backlight_driver);
+}
+module_exit(wm831x_backlight_exit);
+
+MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-backlight");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 10/22] gpio: Add WM831X GPIO driver
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (8 preceding siblings ...)
2009-07-27 13:45 ` [PATCH 09/22] backlight: Add WM831x backlight driver Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-27 20:27 ` David Brownell
2009-07-27 13:46 ` [PATCH 11/22] hwmon: Add WM835x PMIC hardware monitoring driver Mark Brown
` (12 subsequent siblings)
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, David Brownell
Add support for the GPIO pins on the WM831x. No direct support is
currently supplied for configuring non-gpiolib functionality such
as pull configuration and alternate functions, soft configuration
of these will be provided in a future patch.
Currently use of these pins as interrupts is not supported due to
the ongoing issues with generic irq not support interrupt controllers
on interrupt driven buses. Users can directly request the interrupts
with the wm831x-specific APIs currently provided if required.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
---
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/wm831x-gpio.c | 252 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/gpio.h | 55 +++++++++
4 files changed, 315 insertions(+), 0 deletions(-)
create mode 100644 drivers/gpio/wm831x-gpio.c
create mode 100644 include/linux/mfd/wm831x/gpio.h
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 96dda81..6b4c484 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -155,6 +155,13 @@ config GPIO_TWL4030
Say yes here to access the GPIO signals of various multi-function
power management chips from Texas Instruments.
+config GPIO_WM831X
+ tristate "WM831x GPIOs"
+ depends on MFD_WM831X
+ help
+ Say yes here to access the GPIO signals of WM831x power management
+ chips from Wolfson Microelectronics.
+
comment "PCI GPIO expanders:"
config GPIO_BT8XX
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9244c6f..ea7c745 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
+obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
new file mode 100644
index 0000000..f9c09a5
--- /dev/null
+++ b/drivers/gpio/wm831x-gpio.c
@@ -0,0 +1,252 @@
+/*
+ * wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/mfd/core.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/gpio.h>
+
+#define WM831X_GPIO_MAX 16
+
+struct wm831x_gpio {
+ struct wm831x *wm831x;
+ struct gpio_chip gpio_chip;
+};
+
+static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct wm831x_gpio, gpio_chip);
+}
+
+static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+ WM831X_GPN_DIR | WM831X_GPN_TRI,
+ WM831X_GPN_DIR);
+}
+
+static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
+ if (ret < 0)
+ return ret;
+
+ if (ret & 1 << offset)
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_gpio_direction_out(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
+ WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
+}
+
+static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+
+ wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
+ value << offset);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+ struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
+ struct wm831x *wm831x = wm831x_gpio->wm831x;
+ int i;
+
+ for (i = 0; i < chip->ngpio; i++) {
+ int gpio = i + chip->base;
+ int reg;
+ const char *label, *pull, *powerdomain;
+
+ /* We report the GPIO even if it's not requested since
+ * we're also reporting things like alternate
+ * functions which apply even when the GPIO is not in
+ * use as a GPIO.
+ */
+ label = gpiochip_is_requested(chip, i);
+ if (!label)
+ label = "Unrequested";
+
+ seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
+
+ reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
+ if (reg < 0) {
+ dev_err(wm831x->dev,
+ "GPIO control %d read failed: %d\n",
+ gpio, reg);
+ seq_printf(s, "\n");
+ continue;
+ }
+
+ switch (reg & WM831X_GPN_PULL_MASK) {
+ case WM831X_GPIO_PULL_NONE:
+ pull = "nopull";
+ break;
+ case WM831X_GPIO_PULL_DOWN:
+ pull = "pulldown";
+ break;
+ case WM831X_GPIO_PULL_UP:
+ pull = "pullup";
+ default:
+ pull = "INVALID PULL";
+ break;
+ }
+
+ switch (i + 1) {
+ case 1 ... 3:
+ case 7 ... 9:
+ if (reg & WM831X_GPN_PWR_DOM)
+ powerdomain = "VPMIC";
+ else
+ powerdomain = "DBVDD";
+ break;
+
+ case 4 ... 6:
+ case 10 ... 12:
+ if (reg & WM831X_GPN_PWR_DOM)
+ powerdomain = "SYSVDD";
+ else
+ powerdomain = "DBVDD";
+ break;
+
+ case 13 ... 16:
+ powerdomain = "TPVDD";
+ break;
+
+ default:
+ BUG();
+ break;
+ }
+
+ seq_printf(s, " %s %s %s %s%s\n"
+ " %s%s (0x%4x)\n",
+ reg & WM831X_GPN_DIR ? "in" : "out",
+ wm831x_gpio_get(chip, i) ? "high" : "low",
+ pull,
+ powerdomain,
+ reg & WM831X_GPN_POL ? " inverted" : "",
+ reg & WM831X_GPN_OD ? "open-drain" : "CMOS",
+ reg & WM831X_GPN_TRI ? " tristated" : "",
+ reg);
+ }
+}
+#else
+#define wm831x_gpio_dbg_show NULL
+#endif
+
+static struct gpio_chip template_chip = {
+ .label = "wm831x",
+ .owner = THIS_MODULE,
+ .direction_input = wm831x_gpio_direction_in,
+ .get = wm831x_gpio_get,
+ .direction_output = wm831x_gpio_direction_out,
+ .set = wm831x_gpio_set,
+ .dbg_show = wm831x_gpio_dbg_show,
+ .can_sleep = 1,
+};
+
+static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ struct wm831x_gpio *wm831x_gpio;
+ int ret;
+
+ wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL);
+ if (wm831x_gpio == NULL)
+ return -ENOMEM;
+
+ wm831x_gpio->wm831x = wm831x;
+ wm831x_gpio->gpio_chip = template_chip;
+ wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
+ wm831x_gpio->gpio_chip.dev = &pdev->dev;
+ if (pdata && pdata->gpio_base)
+ wm831x_gpio->gpio_chip.base = pdata->gpio_base;
+ else
+ wm831x_gpio->gpio_chip.base = -1;
+
+ ret = gpiochip_add(&wm831x_gpio->gpio_chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+ ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, wm831x_gpio);
+
+ return ret;
+
+err:
+ kfree(wm831x_gpio);
+ return ret;
+}
+
+static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
+{
+ struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&wm831x_gpio->gpio_chip);
+ if (ret == 0)
+ kfree(wm831x_gpio);
+
+ return ret;
+}
+
+static struct platform_driver wm831x_gpio_driver = {
+ .driver.name = "wm831x-gpio",
+ .driver.owner = THIS_MODULE,
+ .probe = wm831x_gpio_probe,
+ .remove = __devexit_p(wm831x_gpio_remove),
+};
+
+static int __init wm831x_gpio_init(void)
+{
+ return platform_driver_register(&wm831x_gpio_driver);
+}
+subsys_initcall(wm831x_gpio_init);
+
+static void __exit wm831x_gpio_exit(void)
+{
+ platform_driver_unregister(&wm831x_gpio_driver);
+}
+module_exit(wm831x_gpio_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-gpio");
diff --git a/include/linux/mfd/wm831x/gpio.h b/include/linux/mfd/wm831x/gpio.h
new file mode 100644
index 0000000..2835614
--- /dev/null
+++ b/include/linux/mfd/wm831x/gpio.h
@@ -0,0 +1,55 @@
+/*
+ * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_GPIO_H__
+#define __MFD_WM831X_GPIO_H__
+
+/*
+ * R16440-16455 (0x4038-0x4047) - GPIOx Control
+ */
+#define WM831X_GPN_DIR 0x8000 /* GPN_DIR */
+#define WM831X_GPN_DIR_MASK 0x8000 /* GPN_DIR */
+#define WM831X_GPN_DIR_SHIFT 15 /* GPN_DIR */
+#define WM831X_GPN_DIR_WIDTH 1 /* GPN_DIR */
+#define WM831X_GPN_PULL_MASK 0x6000 /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_SHIFT 13 /* GPN_PULL - [14:13] */
+#define WM831X_GPN_PULL_WIDTH 2 /* GPN_PULL - [14:13] */
+#define WM831X_GPN_INT_MODE 0x1000 /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_MASK 0x1000 /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_SHIFT 12 /* GPN_INT_MODE */
+#define WM831X_GPN_INT_MODE_WIDTH 1 /* GPN_INT_MODE */
+#define WM831X_GPN_PWR_DOM 0x0800 /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_MASK 0x0800 /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_SHIFT 11 /* GPN_PWR_DOM */
+#define WM831X_GPN_PWR_DOM_WIDTH 1 /* GPN_PWR_DOM */
+#define WM831X_GPN_POL 0x0400 /* GPN_POL */
+#define WM831X_GPN_POL_MASK 0x0400 /* GPN_POL */
+#define WM831X_GPN_POL_SHIFT 10 /* GPN_POL */
+#define WM831X_GPN_POL_WIDTH 1 /* GPN_POL */
+#define WM831X_GPN_OD 0x0200 /* GPN_OD */
+#define WM831X_GPN_OD_MASK 0x0200 /* GPN_OD */
+#define WM831X_GPN_OD_SHIFT 9 /* GPN_OD */
+#define WM831X_GPN_OD_WIDTH 1 /* GPN_OD */
+#define WM831X_GPN_TRI 0x0080 /* GPN_TRI */
+#define WM831X_GPN_TRI_MASK 0x0080 /* GPN_TRI */
+#define WM831X_GPN_TRI_SHIFT 7 /* GPN_TRI */
+#define WM831X_GPN_TRI_WIDTH 1 /* GPN_TRI */
+#define WM831X_GPN_FN_MASK 0x000F /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_SHIFT 0 /* GPN_FN - [3:0] */
+#define WM831X_GPN_FN_WIDTH 4 /* GPN_FN - [3:0] */
+
+#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT)
+#define WM831X_GPIO_PULL_UP (2 << WM831X_GPN_PULL_SHIFT)
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 11/22] hwmon: Add WM835x PMIC hardware monitoring driver
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (9 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 10/22] gpio: Add WM831X GPIO driver Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
` (11 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, lm-sensors
This driver provides reporting of the status supply voltage rails
of the WM835x series of PMICs via the hwmon API.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: lm-sensors@lm-sensors.org
---
Documentation/hwmon/wm8350 | 26 +++++++
drivers/hwmon/Kconfig | 10 +++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/wm8350-hwmon.c | 151 +++++++++++++++++++++++++++++++++++++++
drivers/mfd/wm8350-core.c | 3 +
include/linux/mfd/wm8350/core.h | 6 ++
6 files changed, 197 insertions(+), 0 deletions(-)
create mode 100644 Documentation/hwmon/wm8350
create mode 100644 drivers/hwmon/wm8350-hwmon.c
diff --git a/Documentation/hwmon/wm8350 b/Documentation/hwmon/wm8350
new file mode 100644
index 0000000..98f923b
--- /dev/null
+++ b/Documentation/hwmon/wm8350
@@ -0,0 +1,26 @@
+Kernel driver wm8350-hwmon
+==========================
+
+Supported chips:
+ * Wolfson Microelectronics WM835x PMICs
+ Prefix: 'wm8350'
+ Datasheet:
+ http://www.wolfsonmicro.com/products/WM8350
+ http://www.wolfsonmicro.com/products/WM8351
+ http://www.wolfsonmicro.com/products/WM8352
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM835x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system. Currently the driver provides
+simple access to these major supplies.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC. For the internal supplies the ADC
+is referenced to the system VRTC.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a897732..8d17135 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -930,6 +930,16 @@ config SENSORS_W83627EHF
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_WM8350
+ tristate "Wolfson Microelectronics WM835x"
+ depends on MFD_WM8350
+ help
+ If you say yes here you get support for the hardware
+ monitoring features of the WM835x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm8350-hwmon.
+
config SENSORS_ULTRA45
tristate "Sun Ultra45 PIC16F747"
depends on SPARC64
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 537daac..6126257 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
+obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
diff --git a/drivers/hwmon/wm8350-hwmon.c b/drivers/hwmon/wm8350-hwmon.c
new file mode 100644
index 0000000..1329059
--- /dev/null
+++ b/drivers/hwmon/wm8350-hwmon.c
@@ -0,0 +1,151 @@
+/*
+ * drivers/hwmon/wm8350-hwmon.c - Wolfson Microelectronics WM8350 PMIC
+ * hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/comparator.h>
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "wm8350\n");
+}
+
+static const char *input_names[] = {
+ [WM8350_AUXADC_USB] = "USB",
+ [WM8350_AUXADC_LINE] = "Line",
+ [WM8350_AUXADC_BATT] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int val;
+
+ val = wm8350_read_auxadc(wm8350, channel, 0, 0) * WM8350_AUX_COEFF;
+ val = DIV_ROUND_CLOSEST(val, 1000);
+
+ return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM8350_NAMED_VOLTAGE(id, name) \
+ static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
+ NULL, name); \
+ static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
+ NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM8350_NAMED_VOLTAGE(0, WM8350_AUXADC_USB);
+WM8350_NAMED_VOLTAGE(1, WM8350_AUXADC_BATT);
+WM8350_NAMED_VOLTAGE(2, WM8350_AUXADC_LINE);
+
+static struct attribute *wm8350_attributes[] = {
+ &dev_attr_name.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_label.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_label.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_label.dev_attr.attr,
+
+ NULL,
+};
+
+static const struct attribute_group wm8350_attr_group = {
+ .attrs = wm8350_attributes,
+};
+
+static int __devinit wm8350_hwmon_probe(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &wm8350_attr_group);
+ if (ret)
+ goto err;
+
+ wm8350->hwmon.classdev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(wm8350->hwmon.classdev)) {
+ ret = PTR_ERR(wm8350->hwmon.classdev);
+ goto err_group;
+ }
+
+ return 0;
+
+err_group:
+ sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
+err:
+ return ret;
+}
+
+static int __devexit wm8350_hwmon_remove(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(wm8350->hwmon.classdev);
+ sysfs_remove_group(&pdev->dev.kobj, &wm8350_attr_group);
+
+ return 0;
+}
+
+static struct platform_driver wm8350_hwmon_driver = {
+ .probe = wm8350_hwmon_probe,
+ .remove = __devexit_p(wm8350_hwmon_remove),
+ .driver = {
+ .name = "wm8350-hwmon",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wm8350_hwmon_init(void)
+{
+ return platform_driver_register(&wm8350_hwmon_driver);
+}
+module_init(wm8350_hwmon_init);
+
+static void __exit wm8350_hwmon_exit(void)
+{
+ platform_driver_unregister(&wm8350_hwmon_driver);
+}
+module_exit(wm8350_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM8350 Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm8350-hwmon");
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index fe24079..9d662a5 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -1472,6 +1472,8 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
&(wm8350->codec.pdev));
wm8350_client_dev_register(wm8350, "wm8350-gpio",
&(wm8350->gpio.pdev));
+ wm8350_client_dev_register(wm8350, "wm8350-hwmon",
+ &(wm8350->hwmon.pdev));
wm8350_client_dev_register(wm8350, "wm8350-power",
&(wm8350->power.pdev));
wm8350_client_dev_register(wm8350, "wm8350-rtc", &(wm8350->rtc.pdev));
@@ -1498,6 +1500,7 @@ void wm8350_device_exit(struct wm8350 *wm8350)
platform_device_unregister(wm8350->wdt.pdev);
platform_device_unregister(wm8350->rtc.pdev);
platform_device_unregister(wm8350->power.pdev);
+ platform_device_unregister(wm8350->hwmon.pdev);
platform_device_unregister(wm8350->gpio.pdev);
platform_device_unregister(wm8350->codec.pdev);
diff --git a/include/linux/mfd/wm8350/core.h b/include/linux/mfd/wm8350/core.h
index 42cca67..969b0b5 100644
--- a/include/linux/mfd/wm8350/core.h
+++ b/include/linux/mfd/wm8350/core.h
@@ -605,6 +605,11 @@ struct wm8350_irq {
void *data;
};
+struct wm8350_hwmon {
+ struct platform_device *pdev;
+ struct device *classdev;
+};
+
struct wm8350 {
struct device *dev;
@@ -629,6 +634,7 @@ struct wm8350 {
/* Client devices */
struct wm8350_codec codec;
struct wm8350_gpio gpio;
+ struct wm8350_hwmon hwmon;
struct wm8350_pmic pmic;
struct wm8350_power power;
struct wm8350_rtc rtc;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 12/22] hwmon: WM831x PMIC hardware monitoring driver
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (10 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 11/22] hwmon: Add WM835x PMIC hardware monitoring driver Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-27 19:44 ` [lm-sensors] " Jean Delvare
2009-07-28 14:11 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
` (10 subsequent siblings)
22 siblings, 2 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, lm-sensors
This driver adds support for the hardware monitoring features of
the WM831x PMICs to the hwmon API. Monitoring is provided for
the system voltages supported natively by the WM831x, the chip
temperature, the battery temperature and the auxiliary inputs
of the WM831x.
Currently no alarms are supported, though digital comparators on
the WM831x devices would allow these to be provided.
Since the auxiliary and battery temperature input scaling depends
on the system configuration raw ADC values are reported with scaling
left to userspace.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: lm-sensors@lm-sensors.org
---
Documentation/hwmon/wm831x | 37 +++++++
drivers/hwmon/Kconfig | 11 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/wm831x-hwmon.c | 236 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 285 insertions(+), 0 deletions(-)
create mode 100644 Documentation/hwmon/wm831x
create mode 100644 drivers/hwmon/wm831x-hwmon.c
diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
new file mode 100644
index 0000000..999e525
--- /dev/null
+++ b/Documentation/hwmon/wm831x
@@ -0,0 +1,37 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+ * Wolfson Microelectronics WM831x PMICs
+ Prefix: 'wm831x'
+ Datasheet:
+ http://www.wolfsonmicro.com/products/WM8310
+ http://www.wolfsonmicro.com/products/WM8311
+ http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system. Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
+are available. The chip temperature is calculated as:
+
+ Degrees celsius = (512.8 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+termistor component.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8d17135..6a680e2 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -930,6 +930,17 @@ config SENSORS_W83627EHF
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_WM831X
+ tristate "WM831x PMICs"
+ depends on MFD_WM831X
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Wolfson Microelectronics
+ WM831x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm831x-hwmon.
+
config SENSORS_WM8350
tristate "Wolfson Microelectronics WM835x"
depends on MFD_WM8350
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6126257..a7e7eb7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
+obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
new file mode 100644
index 0000000..0dd9973
--- /dev/null
+++ b/drivers/hwmon/wm831x-hwmon.c
@@ -0,0 +1,236 @@
+/*
+ * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
+ * hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+
+struct wm831x_hwmon {
+ struct wm831x *wm831x;
+ struct device *classdev;
+};
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "wm831x\n");
+}
+
+static const char *input_names[] = {
+ [WM831X_AUX_SYSVDD] = "SYSVDD" ,
+ [WM831X_AUX_USB] = "USB" ,
+ [WM831X_AUX_BKUP_BATT] = "Backup battery",
+ [WM831X_AUX_BATT] = "Battery",
+ [WM831X_AUX_WALL] = "WALL",
+ [WM831X_AUX_CHIP_TEMP] = "PMIC",
+ [WM831X_AUX_BATT_TEMP] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
+}
+
+static ssize_t show_chip_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ /* Degrees celsius = (512.18-ret) / 1.0983 */
+ ret = 512180 - (ret * 1000);
+ ret = (ret * 10000) / 10983;
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t show_batt_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ /* The conversion depends on the battery, leave to userspace */
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM831X_VOLTAGE(id, name) \
+ static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
+ NULL, name);
+
+#define WM831X_NAMED_VOLTAGE(id, name) \
+ static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
+ NULL, name); \
+ static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
+ NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
+WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
+WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
+WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
+
+WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
+WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
+WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
+WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
+ WM831X_AUX_CHIP_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+ WM831X_AUX_CHIP_TEMP);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_batt_temp, NULL,
+ WM831X_AUX_BATT_TEMP);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+ WM831X_AUX_BATT_TEMP);
+
+static struct attribute *wm831x_attributes[] = {
+ &dev_attr_name.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_label.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_label.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_label.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_label.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+
+ NULL,
+};
+
+static const struct attribute_group wm831x_attr_group = {
+ .attrs = wm831x_attributes,
+};
+
+static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_hwmon *hwmon;
+ int ret;
+
+ hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ hwmon->wm831x = wm831x;
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
+ if (ret)
+ goto err;
+
+ hwmon->classdev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon->classdev)) {
+ ret = PTR_ERR(hwmon->classdev);
+ goto err_sysfs;
+ }
+
+ platform_set_drvdata(pdev, hwmon);
+
+ return 0;
+
+err_sysfs:
+ sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+err:
+ kfree(hwmon);
+ return ret;
+}
+
+static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
+{
+ struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(hwmon->classdev);
+ sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+ kfree(hwmon);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_hwmon_driver = {
+ .probe = wm831x_hwmon_probe,
+ .remove = __devexit_p(wm831x_hwmon_remove),
+ .driver = {
+ .name = "wm831x-hwmon",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wm831x_hwmon_init(void)
+{
+ return platform_driver_register(&wm831x_hwmon_driver);
+}
+module_init(wm831x_hwmon_init);
+
+static void __exit wm831x_hwmon_exit(void)
+{
+ platform_driver_unregister(&wm831x_hwmon_driver);
+}
+module_exit(wm831x_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-hwmon");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 13/22] Input: Add support for the WM831x ON pin
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (11 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-27 15:38 ` Dmitry Torokhov
2009-07-28 14:13 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 14/22] leds: Add WM831x status LED driver Mark Brown
` (9 subsequent siblings)
22 siblings, 2 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz
Cc: linux-kernel, Mark Brown, Dmitry Torokhov, Dmitry Torokhov,
linux-input
The WM831x series of PMICs support control of initial power on
through the ON pin on the device with soft control of the pin
at other times. Represent this to userspace as KEY_POWER.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: linux-input@vger.kernel.org
---
drivers/input/misc/Kconfig | 10 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/wm831x-on.c | 163 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/core.h | 19 +++++
4 files changed, 193 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/wm831x-on.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index cbe21bc..852941d 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -279,4 +279,14 @@ config INPUT_BFIN_ROTARY
To compile this driver as a module, choose M here: the
module will be called bfin-rotary.
+config INPUT_WM831X_ON
+ tristate "WM831X ON pin"
+ depends on MFD_WM831X
+ help
+ Support the ON pin of WM831X PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called wm831x_on.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 79c1e9a..c97533f 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
+obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
new file mode 100644
index 0000000..4c3941c
--- /dev/null
+++ b/drivers/input/misc/wm831x-on.c
@@ -0,0 +1,163 @@
+/**
+ * wm831x-on.c - WM831X ON pind river
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_on {
+ struct input_dev *dev;
+ struct delayed_work work;
+ struct wm831x *wm831x;
+};
+
+/*
+ * The chip gives us an interrupt when the ON pin is asserted but we
+ * then need to poll to see when the pin is deasserted.
+ */
+static void wm831x_poll_on(struct work_struct *work)
+{
+ struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on,
+ work.work);
+ struct wm831x *wm831x = wm831x_on->wm831x;
+ int poll, ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL);
+ if (ret >= 0) {
+ poll = !(ret & WM831X_ON_PIN_STS);
+
+ input_report_key(wm831x_on->dev, KEY_POWER, poll);
+ input_sync(wm831x_on->dev);
+ } else {
+ dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret);
+ poll = 1;
+ }
+
+ if (poll)
+ schedule_delayed_work(&wm831x_on->work, 100);
+}
+
+static irqreturn_t wm831x_on_irq(int irq, void *data)
+{
+ struct wm831x_on *wm831x_on = data;
+
+ schedule_work(&wm831x_on->work.work);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit wm831x_on_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_on *wm831x_on;
+ int irq = platform_get_irq(pdev, 0);
+ int ret;
+
+ wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL);
+ if (!wm831x_on) {
+ dev_err(&pdev->dev, "Can't allocate data\n");
+ return -ENOMEM;
+ }
+
+ wm831x_on->wm831x = wm831x;
+ INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
+
+ wm831x_on->dev = input_allocate_device();
+ if (!wm831x_on->dev) {
+ dev_err(&pdev->dev, "Can't allocate input dev\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY);
+ wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ wm831x_on->dev->name = "wm831x_on";
+ wm831x_on->dev->phys = "wm831x_on/input0";
+ wm831x_on->dev->dev.parent = &pdev->dev;
+
+ ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
+ IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
+ goto err_input_dev;
+ }
+ ret = input_register_device(wm831x_on->dev);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret);
+ goto err_irq;
+ }
+
+ platform_set_drvdata(pdev, wm831x_on);
+
+ return 0;
+
+err_irq:
+ wm831x_free_irq(wm831x, irq, NULL);
+err_input_dev:
+ input_free_device(wm831x_on->dev);
+err:
+ kfree(wm831x_on);
+ return ret;
+}
+
+static int __devexit wm831x_on_remove(struct platform_device *pdev)
+{
+ struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+ cancel_delayed_work_sync(&wm831x_on->work);
+ input_unregister_device(wm831x_on->dev);
+ kfree(wm831x_on);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_on_driver = {
+ .probe = wm831x_on_probe,
+ .remove = __devexit_p(wm831x_on_remove),
+ .driver = {
+ .name = "wm831x-on",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wm831x_on_init(void)
+{
+ return platform_driver_register(&wm831x_on_driver);
+}
+module_init(wm831x_on_init);
+
+static void __exit wm831x_on_exit(void)
+{
+ platform_driver_unregister(&wm831x_on_driver);
+}
+module_exit(wm831x_on_exit);
+
+MODULE_ALIAS("platform:wm831x-on");
+MODULE_DESCRIPTION("WM831x ON pin");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index d7134df..91eb493 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -216,6 +216,25 @@
#define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */
#define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */
+/*
+ * R16389 (0x4005) - ON Pin Control
+ */
+#define WM831X_ON_PIN_SECACT_MASK 0x0300 /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_SHIFT 8 /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_WIDTH 2 /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_PRIMACT_MASK 0x0030 /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_SHIFT 4 /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_WIDTH 2 /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_STS 0x0008 /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_MASK 0x0008 /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_SHIFT 3 /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_WIDTH 1 /* ON_PIN_STS */
+#define WM831X_ON_PIN_TO_MASK 0x0003 /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */
+
+struct regulator_dev;
+
struct wm831x {
struct mutex io_lock;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 14/22] leds: Add WM831x status LED driver
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (12 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-27 13:46 ` [PATCH 15/22] power_supply: Add driver for the PMU on WM831x PMICs Mark Brown
` (8 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Richard Purdie
The WM831x devices feature two software controlled status LEDs with
hardware assisted blinking.
The device can also autonomously control the LEDs based on a selection
of sources. This can be configured at boot time using either platform
data or the chip OTP. A sysfs file in the style of that for triggers
allowing the control source to be configured at run time. Triggers
can't be used here since they can't depend on the implementation details
of a specific LED type.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
---
drivers/leds/Kconfig | 7 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-wm831x-status.c | 341 +++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/status.h | 34 ++++
4 files changed, 383 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/leds-wm831x-status.c
create mode 100644 include/linux/mfd/wm831x/status.h
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 7c8e712..edfd4e3 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -195,6 +195,13 @@ config LEDS_PCA955X
LED driver chips accessed via the I2C bus. Supported
devices include PCA9550, PCA9551, PCA9552, and PCA9553.
+config LEDS_WM831X_STATUS
+ tristate "LED support for status LEDs on WM831x PMICs"
+ depends on LEDS_CLASS && MFD_WM831X
+ help
+ This option enables support for the status LEDs of the WM831x
+ series of PMICs.
+
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
depends on LEDS_CLASS && MFD_WM8350
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index e8cdcf7..46d7270 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
+obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
new file mode 100644
index 0000000..c586d05
--- /dev/null
+++ b/drivers/leds/leds-wm831x-status.c
@@ -0,0 +1,341 @@
+/*
+ * LED driver for WM831x status LEDs
+ *
+ * Copyright(C) 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/status.h>
+
+
+struct wm831x_status {
+ struct led_classdev cdev;
+ struct wm831x *wm831x;
+ struct work_struct work;
+ struct mutex mutex;
+
+ spinlock_t value_lock;
+ int reg; /* Control register */
+ int reg_val; /* Control register value */
+
+ int blink;
+ int blink_time;
+ int blink_cyc;
+ int src;
+ enum led_brightness brightness;
+};
+
+#define to_wm831x_status(led_cdev) \
+ container_of(led_cdev, struct wm831x_status, cdev)
+
+static void wm831x_status_work(struct work_struct *work)
+{
+ struct wm831x_status *led = container_of(work, struct wm831x_status,
+ work);
+ unsigned long flags;
+
+ mutex_lock(&led->mutex);
+
+ led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK |
+ WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK);
+
+ spin_lock_irqsave(&led->value_lock, flags);
+
+ led->reg_val |= led->src << WM831X_LED_SRC_SHIFT;
+ if (led->blink) {
+ led->reg_val |= 2 << WM831X_LED_MODE_SHIFT;
+ led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT;
+ led->reg_val |= led->blink_cyc;
+ } else {
+ if (led->brightness != LED_OFF)
+ led->reg_val |= 1 << WM831X_LED_MODE_SHIFT;
+ }
+
+ spin_unlock_irqrestore(&led->value_lock, flags);
+
+ wm831x_reg_write(led->wm831x, led->reg, led->reg_val);
+
+ mutex_unlock(&led->mutex);
+}
+
+static void wm831x_status_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&led->value_lock, flags);
+ led->brightness = value;
+ if (value == LED_OFF)
+ led->blink = 0;
+ schedule_work(&led->work);
+ spin_unlock_irqrestore(&led->value_lock, flags);
+}
+
+static int wm831x_status_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ unsigned long flags;
+ int ret = 0;
+
+ /* Pick some defaults if we've not been given times */
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 250;
+ *delay_off = 250;
+ }
+
+ spin_lock_irqsave(&led->value_lock, flags);
+
+ /* We only have a limited selection of settings, see if we can
+ * support the configuration we're being given */
+ switch (*delay_on) {
+ case 1000:
+ led->blink_time = 0;
+ break;
+ case 250:
+ led->blink_time = 1;
+ break;
+ case 125:
+ led->blink_time = 2;
+ break;
+ case 62:
+ case 63:
+ /* Actually 62.5ms */
+ led->blink_time = 3;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ if (ret == 0) {
+ switch (*delay_off / *delay_on) {
+ case 1:
+ led->blink_cyc = 0;
+ break;
+ case 3:
+ led->blink_cyc = 1;
+ break;
+ case 4:
+ led->blink_cyc = 2;
+ break;
+ case 8:
+ led->blink_cyc = 3;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ }
+
+ if (ret == 0)
+ led->blink = 1;
+ else
+ led->blink = 0;
+
+ /* Always update; if we fail turn off blinking since we expect
+ * a software fallback. */
+ schedule_work(&led->work);
+
+ spin_unlock_irqrestore(&led->value_lock, flags);
+
+ return ret;
+}
+
+static const char *led_src_texts[] = {
+ "otp",
+ "power",
+ "charger",
+ "soft",
+};
+
+static ssize_t wm831x_status_src_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ int i;
+ ssize_t ret = 0;
+
+ mutex_lock(&led->mutex);
+
+ for (i = 0; i < ARRAY_SIZE(led_src_texts); i++)
+ if (i == led->src)
+ ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]);
+ else
+ ret += sprintf(&buf[ret], "%s ", led_src_texts[i]);
+
+ mutex_unlock(&led->mutex);
+
+ ret += sprintf(&buf[ret], "\n");
+
+ return ret;
+}
+
+static ssize_t wm831x_status_src_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ char name[20];
+ int i;
+ size_t len;
+
+ name[sizeof(name) - 1] = '\0';
+ strncpy(name, buf, sizeof(name) - 1);
+ len = strlen(name);
+
+ if (len && name[len - 1] == '\n')
+ name[len - 1] = '\0';
+
+ for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) {
+ if (!strcmp(name, led_src_texts[i])) {
+ mutex_lock(&led->mutex);
+
+ led->src = i;
+ schedule_work(&led->work);
+
+ mutex_unlock(&led->mutex);
+ }
+ }
+
+ return size;
+}
+
+static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store);
+
+static int wm831x_status_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *chip_pdata;
+ struct wm831x_status_pdata pdata;
+ struct wm831x_status *drvdata;
+ struct resource *res;
+ int id = pdev->id % ARRAY_SIZE(chip_pdata->status);
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+ dev_set_drvdata(&pdev->dev, drvdata);
+
+ drvdata->wm831x = wm831x;
+ drvdata->reg = res->start;
+
+ if (wm831x->dev->platform_data)
+ chip_pdata = wm831x->dev->platform_data;
+ else
+ chip_pdata = NULL;
+
+ memset(&pdata, 0, sizeof(pdata));
+ if (chip_pdata && chip_pdata->status[id])
+ memcpy(&pdata, chip_pdata->status[id], sizeof(pdata));
+ else
+ pdata.name = dev_name(&pdev->dev);
+
+ mutex_init(&drvdata->mutex);
+ INIT_WORK(&drvdata->work, wm831x_status_work);
+ spin_lock_init(&drvdata->value_lock);
+
+ /* We cache the configuration register and read startup values
+ * from it. */
+ drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg);
+
+ if (drvdata->reg_val & WM831X_LED_MODE_MASK)
+ drvdata->brightness = LED_FULL;
+ else
+ drvdata->brightness = LED_OFF;
+
+ /* Set a default source if configured, otherwise leave the
+ * current hardware setting.
+ */
+ if (pdata.default_src == WM831X_STATUS_PRESERVE) {
+ drvdata->src = drvdata->reg_val;
+ drvdata->src &= WM831X_LED_SRC_MASK;
+ drvdata->src >>= WM831X_LED_SRC_SHIFT;
+ } else {
+ drvdata->src = pdata.default_src - 1;
+ }
+
+ drvdata->cdev.name = pdata.name;
+ drvdata->cdev.default_trigger = pdata.default_trigger;
+ drvdata->cdev.brightness_set = wm831x_status_set;
+ drvdata->cdev.blink_set = wm831x_status_blink_set;
+
+ ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
+ goto err_led;
+ }
+
+ ret = device_create_file(drvdata->cdev.dev, &dev_attr_src);
+ if (ret != 0)
+ dev_err(&pdev->dev,
+ "No source control for LED: %d\n", ret);
+
+ return 0;
+
+err_led:
+ led_classdev_unregister(&drvdata->cdev);
+ kfree(drvdata);
+err:
+ return ret;
+}
+
+static int wm831x_status_remove(struct platform_device *pdev)
+{
+ struct wm831x_status *drvdata = platform_get_drvdata(pdev);
+
+ device_remove_file(drvdata->cdev.dev, &dev_attr_src);
+ led_classdev_unregister(&drvdata->cdev);
+ kfree(drvdata);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_status_driver = {
+ .driver = {
+ .name = "wm831x-status",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_status_probe,
+ .remove = wm831x_status_remove,
+};
+
+static int __devinit wm831x_status_init(void)
+{
+ return platform_driver_register(&wm831x_status_driver);
+}
+module_init(wm831x_status_init);
+
+static void wm831x_status_exit(void)
+{
+ platform_driver_unregister(&wm831x_status_driver);
+}
+module_exit(wm831x_status_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x status LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-status");
diff --git a/include/linux/mfd/wm831x/status.h b/include/linux/mfd/wm831x/status.h
new file mode 100644
index 0000000..6bc090d
--- /dev/null
+++ b/include/linux/mfd/wm831x/status.h
@@ -0,0 +1,34 @@
+/*
+ * include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_STATUS_H__
+#define __MFD_WM831X_STATUS_H__
+
+#define WM831X_LED_SRC_MASK 0xC000 /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_SHIFT 14 /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_WIDTH 2 /* LED_SRC - [15:14] */
+#define WM831X_LED_MODE_MASK 0x0300 /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_SHIFT 8 /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_WIDTH 2 /* LED_MODE - [9:8] */
+#define WM831X_LED_SEQ_LEN_MASK 0x0030 /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_SHIFT 4 /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_WIDTH 2 /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_DUR_MASK 0x000C /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_SHIFT 2 /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_WIDTH 2 /* LED_DUR - [3:2] */
+#define WM831X_LED_DUTY_CYC_MASK 0x0003 /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_SHIFT 0 /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_WIDTH 2 /* LED_DUTY_CYC - [1:0] */
+
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 15/22] power_supply: Add driver for the PMU on WM831x PMICs
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (13 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 14/22] leds: Add WM831x status LED driver Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-27 13:46 ` [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support Mark Brown
` (7 subsequent siblings)
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Anton Vorontsov
The WM831x PMICs provide power path management from three sources:
a wall supply, USB and a battery with integrated charger. They also
provide an additional backup supply with integrated for maintaining
always on functionality such as the RTC and monitoring of power
switches.
After some initial configuration at startup the device operates
autonomously, the driver simply provides reporting of the current
state.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Anton Vorontsov <cbouatmailru@gmail.com>
---
drivers/power/Kconfig | 7 +
drivers/power/Makefile | 1 +
drivers/power/wm831x_power.c | 779 ++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/pmu.h | 189 ++++++++++
4 files changed, 976 insertions(+), 0 deletions(-)
create mode 100644 drivers/power/wm831x_power.c
create mode 100644 include/linux/mfd/wm831x/pmu.h
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index bdbc4f7..343194c 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -29,6 +29,13 @@ config APM_POWER
Say Y here to enable support APM status emulation using
battery class devices.
+config WM831X_POWER
+ tristate "WM831X PMU support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the power management unit
+ provided by Wolfson Microelectronics WM831x PMICs.
+
config WM8350_POWER
tristate "WM8350 PMU support"
depends on MFD_WM8350
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 380d17c..b96f29d 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
obj-$(CONFIG_PDA_POWER) += pda_power.o
obj-$(CONFIG_APM_POWER) += apm_power.o
+obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
diff --git a/drivers/power/wm831x_power.c b/drivers/power/wm831x_power.c
new file mode 100644
index 0000000..2a4c8b0
--- /dev/null
+++ b/drivers/power/wm831x_power.c
@@ -0,0 +1,779 @@
+/*
+ * PMU driver for Wolfson Microelectronics wm831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pmu.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+struct wm831x_power {
+ struct wm831x *wm831x;
+ struct power_supply wall;
+ struct power_supply backup;
+ struct power_supply usb;
+ struct power_supply battery;
+};
+
+static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & supply)
+ val->intval = 1;
+ else
+ val->intval = 0;
+
+ return 0;
+}
+
+static int wm831x_power_read_voltage(struct wm831x *wm831x,
+ enum wm831x_auxadc src,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(wm831x, src);
+ if (ret >= 0)
+ val->intval = ret;
+
+ return ret;
+}
+
+/*********************************************************************
+ * WALL Power
+ *********************************************************************/
+static int wm831x_wall_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_wall_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ * USB Power
+ *********************************************************************/
+static int wm831x_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ * Battery properties
+ *********************************************************************/
+
+struct chg_map {
+ int val;
+ int reg_val;
+};
+
+static struct chg_map trickle_ilims[] = {
+ { 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT },
+};
+
+static struct chg_map vsels[] = {
+ { 4050, 0 << WM831X_CHG_VSEL_SHIFT },
+ { 4100, 1 << WM831X_CHG_VSEL_SHIFT },
+ { 4150, 2 << WM831X_CHG_VSEL_SHIFT },
+ { 4200, 3 << WM831X_CHG_VSEL_SHIFT },
+};
+
+static struct chg_map fast_ilims[] = {
+ { 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT },
+};
+
+static struct chg_map eoc_iterms[] = {
+ { 20, 0 << WM831X_CHG_ITERM_SHIFT },
+ { 30, 1 << WM831X_CHG_ITERM_SHIFT },
+ { 40, 2 << WM831X_CHG_ITERM_SHIFT },
+ { 50, 3 << WM831X_CHG_ITERM_SHIFT },
+ { 60, 4 << WM831X_CHG_ITERM_SHIFT },
+ { 70, 5 << WM831X_CHG_ITERM_SHIFT },
+ { 80, 6 << WM831X_CHG_ITERM_SHIFT },
+ { 90, 7 << WM831X_CHG_ITERM_SHIFT },
+};
+
+static struct chg_map chg_times[] = {
+ { 60, 0 << WM831X_CHG_TIME_SHIFT },
+ { 90, 1 << WM831X_CHG_TIME_SHIFT },
+ { 120, 2 << WM831X_CHG_TIME_SHIFT },
+ { 150, 3 << WM831X_CHG_TIME_SHIFT },
+ { 180, 4 << WM831X_CHG_TIME_SHIFT },
+ { 210, 5 << WM831X_CHG_TIME_SHIFT },
+ { 240, 6 << WM831X_CHG_TIME_SHIFT },
+ { 270, 7 << WM831X_CHG_TIME_SHIFT },
+ { 300, 8 << WM831X_CHG_TIME_SHIFT },
+ { 330, 9 << WM831X_CHG_TIME_SHIFT },
+ { 360, 10 << WM831X_CHG_TIME_SHIFT },
+ { 390, 11 << WM831X_CHG_TIME_SHIFT },
+ { 420, 12 << WM831X_CHG_TIME_SHIFT },
+ { 450, 13 << WM831X_CHG_TIME_SHIFT },
+ { 480, 14 << WM831X_CHG_TIME_SHIFT },
+ { 510, 15 << WM831X_CHG_TIME_SHIFT },
+};
+
+static void wm831x_battey_apply_config(struct wm831x *wm831x,
+ struct chg_map *map, int count, int val,
+ int *reg, const char *name,
+ const char *units)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ if (val == map[i].val)
+ break;
+ if (i == count) {
+ dev_err(wm831x->dev, "Invalid %s %d%s\n",
+ name, val, units);
+ } else {
+ *reg |= map[i].reg_val;
+ dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units);
+ }
+}
+
+static void wm831x_config_battery(struct wm831x *wm831x)
+{
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_battery_pdata *pdata;
+ int ret, reg1, reg2;
+
+ if (!wm831x_pdata || !wm831x_pdata->battery) {
+ dev_warn(wm831x->dev,
+ "No battery charger configuration\n");
+ return;
+ }
+
+ pdata = wm831x_pdata->battery;
+
+ reg1 = 0;
+ reg2 = 0;
+
+ if (!pdata->enable) {
+ dev_info(wm831x->dev, "Battery charger disabled\n");
+ return;
+ }
+
+ reg1 |= WM831X_CHG_ENA;
+ if (pdata->off_mask)
+ reg2 |= WM831X_CHG_OFF_MSK;
+ if (pdata->fast_enable)
+ reg1 |= WM831X_CHG_FAST;
+
+ wm831x_battey_apply_config(wm831x, trickle_ilims,
+ ARRAY_SIZE(trickle_ilims),
+ pdata->trickle_ilim, ®2,
+ "trickle charge current limit", "mA");
+
+ wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels),
+ pdata->vsel, ®2,
+ "target voltage", "mV");
+
+ wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims),
+ pdata->fast_ilim, ®2,
+ "fast charge current limit", "mA");
+
+ wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms),
+ pdata->eoc_iterm, ®1,
+ "end of charge current threshold", "mA");
+
+ wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times),
+ pdata->timeout, ®2,
+ "charger timeout", "min");
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
+ WM831X_CHG_ENA_MASK |
+ WM831X_CHG_FAST_MASK |
+ WM831X_CHG_ITERM_MASK |
+ WM831X_CHG_ITERM_MASK,
+ reg1);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to set charger control 1: %d\n",
+ ret);
+
+ ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2,
+ WM831X_CHG_OFF_MSK |
+ WM831X_CHG_TIME_MASK |
+ WM831X_CHG_FAST_ILIM_MASK |
+ WM831X_CHG_TRKL_ILIM_MASK |
+ WM831X_CHG_VSEL_MASK,
+ reg2);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to set charger control 2: %d\n",
+ ret);
+
+ wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_bat_check_status(struct wm831x *wm831x, int *status)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & WM831X_PWR_SRC_BATT) {
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_OFF:
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case WM831X_CHG_STATE_TRICKLE:
+ case WM831X_CHG_STATE_FAST:
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+
+ default:
+ *status = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_check_type(struct wm831x *wm831x, int *type)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_TRICKLE:
+ case WM831X_CHG_STATE_TRICKLE_OT:
+ *type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case WM831X_CHG_STATE_FAST:
+ case WM831X_CHG_STATE_FAST_OT:
+ *type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ default:
+ *type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_check_health(struct wm831x *wm831x, int *health)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & WM831X_BATT_HOT_STS) {
+ *health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ return 0;
+ }
+
+ if (ret & WM831X_BATT_COLD_STS) {
+ *health = POWER_SUPPLY_HEALTH_COLD;
+ return 0;
+ }
+
+ if (ret & WM831X_BATT_OV_STS) {
+ *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ return 0;
+ }
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_TRICKLE_OT:
+ case WM831X_CHG_STATE_FAST_OT:
+ *health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ case WM831X_CHG_STATE_DEFECTIVE:
+ *health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ *health = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = wm831x_bat_check_status(wm831x, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT,
+ val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = wm831x_bat_check_health(wm831x, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = wm831x_bat_check_type(wm831x, &val->intval);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static const char *wm831x_bat_irqs[] = {
+ "BATT HOT",
+ "BATT COLD",
+ "BATT FAIL",
+ "OV",
+ "END",
+ "TO",
+ "MODE",
+ "START",
+};
+
+static irqreturn_t wm831x_bat_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq);
+
+ /* The battery charger is autonomous so we don't need to do
+ * anything except kick user space */
+ power_supply_changed(&wm831x_power->battery);
+
+ return IRQ_HANDLED;
+}
+
+
+/*********************************************************************
+ * Backup supply properties
+ *********************************************************************/
+
+static void wm831x_config_backup(struct wm831x *wm831x)
+{
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_backup_pdata *pdata;
+ int ret, reg;
+
+ if (!wm831x_pdata || !wm831x_pdata->backup) {
+ dev_warn(wm831x->dev,
+ "No backup battery charger configuration\n");
+ return;
+ }
+
+ pdata = wm831x_pdata->backup;
+
+ reg = 0;
+
+ if (pdata->charger_enable)
+ reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
+ if (pdata->no_constant_voltage)
+ reg |= WM831X_BKUP_CHG_MODE;
+
+ switch (pdata->vlim) {
+ case 2500:
+ break;
+ case 3100:
+ reg |= WM831X_BKUP_CHG_VLIM;
+ break;
+ default:
+ dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
+ pdata->vlim);
+ }
+
+ switch (pdata->ilim) {
+ case 100:
+ break;
+ case 200:
+ reg |= 1;
+ break;
+ case 300:
+ reg |= 2;
+ break;
+ case 400:
+ reg |= 3;
+ break;
+ default:
+ dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
+ pdata->ilim);
+ }
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
+ WM831X_BKUP_CHG_ENA_MASK |
+ WM831X_BKUP_CHG_MODE_MASK |
+ WM831X_BKUP_BATT_DET_ENA_MASK |
+ WM831X_BKUP_CHG_VLIM_MASK |
+ WM831X_BKUP_CHG_ILIM_MASK,
+ reg);
+ if (ret != 0)
+ dev_err(wm831x->dev,
+ "Failed to set backup charger config: %d\n", ret);
+
+ wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_backup_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (ret & WM831X_BKUP_CHG_STS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
+ val);
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ if (ret & WM831X_BKUP_CHG_STS)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_backup_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+/*********************************************************************
+ * Initialisation
+ *********************************************************************/
+
+static irqreturn_t wm831x_syslo_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ /* Not much we can actually *do* but tell people for
+ * posterity, we're probably about to run out of power. */
+ dev_crit(wm831x->dev, "SYSVDD under voltage\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ dev_dbg(wm831x->dev, "Power source changed\n");
+
+ /* Just notify for everything - little harm in overnotifying.
+ * The backup battery is not a power source while the system
+ * is running so skip that.
+ */
+ power_supply_changed(&wm831x_power->battery);
+ power_supply_changed(&wm831x_power->usb);
+ power_supply_changed(&wm831x_power->wall);
+
+ return IRQ_HANDLED;
+}
+
+static __devinit int wm831x_power_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_power *power;
+ struct power_supply *usb;
+ struct power_supply *battery;
+ struct power_supply *wall;
+ struct power_supply *backup;
+ int ret, irq, i;
+
+ power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL);
+ if (power == NULL)
+ return -ENOMEM;
+
+ power->wm831x = wm831x;
+ platform_set_drvdata(pdev, power);
+
+ usb = &power->usb;
+ battery = &power->battery;
+ wall = &power->wall;
+ backup = &power->backup;
+
+ /* We ignore configuration failures since we can still read back
+ * the status without enabling either of the chargers.
+ */
+ wm831x_config_battery(wm831x);
+ wm831x_config_backup(wm831x);
+
+ wall->name = "wm831x-wall";
+ wall->type = POWER_SUPPLY_TYPE_MAINS;
+ wall->properties = wm831x_wall_props;
+ wall->num_properties = ARRAY_SIZE(wm831x_wall_props);
+ wall->get_property = wm831x_wall_get_prop;
+ ret = power_supply_register(&pdev->dev, wall);
+ if (ret)
+ goto err_kmalloc;
+
+ battery->name = "wm831x-battery";
+ battery->properties = wm831x_bat_props;
+ battery->num_properties = ARRAY_SIZE(wm831x_bat_props);
+ battery->get_property = wm831x_bat_get_prop;
+ battery->use_for_apm = 1;
+ ret = power_supply_register(&pdev->dev, battery);
+ if (ret)
+ goto err_wall;
+
+ usb->name = "wm831x-usb",
+ usb->type = POWER_SUPPLY_TYPE_USB;
+ usb->properties = wm831x_usb_props;
+ usb->num_properties = ARRAY_SIZE(wm831x_usb_props);
+ usb->get_property = wm831x_usb_get_prop;
+ ret = power_supply_register(&pdev->dev, usb);
+ if (ret)
+ goto err_battery;
+
+ backup->name = "wm831x-backup";
+ backup->type = POWER_SUPPLY_TYPE_BATTERY;
+ backup->properties = wm831x_backup_props;
+ backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
+ backup->get_property = wm831x_backup_get_prop;
+ ret = power_supply_register(&pdev->dev, backup);
+ if (ret)
+ goto err_usb;
+
+ irq = platform_get_irq_byname(pdev, "SYSLO");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq,
+ IRQF_TRIGGER_RISING, "SYSLO",
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
+ irq, ret);
+ goto err_backup;
+ }
+
+ irq = platform_get_irq_byname(pdev, "PWR SRC");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_pwr_src_irq,
+ IRQF_TRIGGER_RISING, "Power source",
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
+ irq, ret);
+ goto err_syslo;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+ ret = wm831x_request_irq(wm831x, irq, wm831x_bat_irq,
+ IRQF_TRIGGER_RISING,
+ wm831x_bat_irqs[i],
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to request %s IRQ %d: %d\n",
+ wm831x_bat_irqs[i], irq, ret);
+ goto err_bat_irq;
+ }
+ }
+
+ return ret;
+
+err_bat_irq:
+ for (; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+ wm831x_free_irq(wm831x, irq, power);
+ }
+ irq = platform_get_irq_byname(pdev, "PWR SRC");
+ wm831x_free_irq(wm831x, irq, power);
+err_syslo:
+ irq = platform_get_irq_byname(pdev, "SYSLO");
+ wm831x_free_irq(wm831x, irq, power);
+err_backup:
+ power_supply_unregister(backup);
+err_usb:
+ power_supply_unregister(usb);
+err_battery:
+ power_supply_unregister(battery);
+err_wall:
+ power_supply_unregister(wall);
+err_kmalloc:
+ kfree(power);
+ return ret;
+}
+
+static __devexit int wm831x_power_remove(struct platform_device *pdev)
+{
+ struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int irq, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+ wm831x_free_irq(wm831x, irq, wm831x_power);
+ }
+
+ irq = platform_get_irq_byname(pdev, "PWR SRC");
+ wm831x_free_irq(wm831x, irq, wm831x_power);
+
+ irq = platform_get_irq_byname(pdev, "SYSLO");
+ wm831x_free_irq(wm831x, irq, wm831x_power);
+
+ power_supply_unregister(&wm831x_power->backup);
+ power_supply_unregister(&wm831x_power->battery);
+ power_supply_unregister(&wm831x_power->wall);
+ power_supply_unregister(&wm831x_power->usb);
+ return 0;
+}
+
+static struct platform_driver wm831x_power_driver = {
+ .probe = wm831x_power_probe,
+ .remove = __devexit_p(wm831x_power_remove),
+ .driver = {
+ .name = "wm831x-power",
+ },
+};
+
+static int __init wm831x_power_init(void)
+{
+ return platform_driver_register(&wm831x_power_driver);
+}
+module_init(wm831x_power_init);
+
+static void __exit wm831x_power_exit(void)
+{
+ platform_driver_unregister(&wm831x_power_driver);
+}
+module_exit(wm831x_power_exit);
+
+MODULE_DESCRIPTION("Power supply driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-power");
diff --git a/include/linux/mfd/wm831x/pmu.h b/include/linux/mfd/wm831x/pmu.h
new file mode 100644
index 0000000..b18cbb0
--- /dev/null
+++ b/include/linux/mfd/wm831x/pmu.h
@@ -0,0 +1,189 @@
+/*
+ * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PMU_H__
+#define __MFD_WM831X_PMU_H__
+
+/*
+ * R16387 (0x4003) - Power State
+ */
+#define WM831X_CHIP_ON 0x8000 /* CHIP_ON */
+#define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */
+#define WM831X_CHIP_ON_SHIFT 15 /* CHIP_ON */
+#define WM831X_CHIP_ON_WIDTH 1 /* CHIP_ON */
+#define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */
+#define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */
+#define WM831X_CHIP_SLP_SHIFT 14 /* CHIP_SLP */
+#define WM831X_CHIP_SLP_WIDTH 1 /* CHIP_SLP */
+#define WM831X_REF_LP 0x1000 /* REF_LP */
+#define WM831X_REF_LP_MASK 0x1000 /* REF_LP */
+#define WM831X_REF_LP_SHIFT 12 /* REF_LP */
+#define WM831X_REF_LP_WIDTH 1 /* REF_LP */
+#define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_SHIFT 10 /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_WIDTH 2 /* PWRSTATE_DLY - [11:10] */
+#define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */
+#define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */
+#define WM831X_SWRST_DLY_SHIFT 9 /* SWRST_DLY */
+#define WM831X_SWRST_DLY_WIDTH 1 /* SWRST_DLY */
+#define WM831X_USB100MA_STARTUP_MASK 0x0030 /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_SHIFT 4 /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_WIDTH 2 /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB_CURR_STS 0x0008 /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_MASK 0x0008 /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_SHIFT 3 /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_WIDTH 1 /* USB_CURR_STS */
+#define WM831X_USB_ILIM_MASK 0x0007 /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_SHIFT 0 /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_WIDTH 3 /* USB_ILIM - [2:0] */
+
+/*
+ * R16397 (0x400D) - System Status
+ */
+#define WM831X_THW_STS 0x8000 /* THW_STS */
+#define WM831X_THW_STS_MASK 0x8000 /* THW_STS */
+#define WM831X_THW_STS_SHIFT 15 /* THW_STS */
+#define WM831X_THW_STS_WIDTH 1 /* THW_STS */
+#define WM831X_PWR_SRC_BATT 0x0400 /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_MASK 0x0400 /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_SHIFT 10 /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_WIDTH 1 /* PWR_SRC_BATT */
+#define WM831X_PWR_WALL 0x0200 /* PWR_WALL */
+#define WM831X_PWR_WALL_MASK 0x0200 /* PWR_WALL */
+#define WM831X_PWR_WALL_SHIFT 9 /* PWR_WALL */
+#define WM831X_PWR_WALL_WIDTH 1 /* PWR_WALL */
+#define WM831X_PWR_USB 0x0100 /* PWR_USB */
+#define WM831X_PWR_USB_MASK 0x0100 /* PWR_USB */
+#define WM831X_PWR_USB_SHIFT 8 /* PWR_USB */
+#define WM831X_PWR_USB_WIDTH 1 /* PWR_USB */
+#define WM831X_MAIN_STATE_MASK 0x001F /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_SHIFT 0 /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_WIDTH 5 /* MAIN_STATE - [4:0] */
+
+/*
+ * R16456 (0x4048) - Charger Control 1
+ */
+#define WM831X_CHG_ENA 0x8000 /* CHG_ENA */
+#define WM831X_CHG_ENA_MASK 0x8000 /* CHG_ENA */
+#define WM831X_CHG_ENA_SHIFT 15 /* CHG_ENA */
+#define WM831X_CHG_ENA_WIDTH 1 /* CHG_ENA */
+#define WM831X_CHG_FRC 0x4000 /* CHG_FRC */
+#define WM831X_CHG_FRC_MASK 0x4000 /* CHG_FRC */
+#define WM831X_CHG_FRC_SHIFT 14 /* CHG_FRC */
+#define WM831X_CHG_FRC_WIDTH 1 /* CHG_FRC */
+#define WM831X_CHG_ITERM_MASK 0x1C00 /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_SHIFT 10 /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_WIDTH 3 /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_FAST 0x0020 /* CHG_FAST */
+#define WM831X_CHG_FAST_MASK 0x0020 /* CHG_FAST */
+#define WM831X_CHG_FAST_SHIFT 5 /* CHG_FAST */
+#define WM831X_CHG_FAST_WIDTH 1 /* CHG_FAST */
+#define WM831X_CHG_IMON_ENA 0x0002 /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_MASK 0x0002 /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_SHIFT 1 /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_WIDTH 1 /* CHG_IMON_ENA */
+#define WM831X_CHG_CHIP_TEMP_MON 0x0001 /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_MASK 0x0001 /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_SHIFT 0 /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_WIDTH 1 /* CHG_CHIP_TEMP_MON */
+
+/*
+ * R16457 (0x4049) - Charger Control 2
+ */
+#define WM831X_CHG_OFF_MSK 0x4000 /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_MASK 0x4000 /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_SHIFT 14 /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_WIDTH 1 /* CHG_OFF_MSK */
+#define WM831X_CHG_TIME_MASK 0x0F00 /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_SHIFT 8 /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_WIDTH 4 /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TRKL_ILIM_MASK 0x00C0 /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_SHIFT 6 /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_WIDTH 2 /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_VSEL_MASK 0x0030 /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_SHIFT 4 /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_WIDTH 2 /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_FAST_ILIM_MASK 0x000F /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_SHIFT 0 /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_WIDTH 4 /* CHG_FAST_ILIM - [3:0] */
+
+/*
+ * R16458 (0x404A) - Charger Status
+ */
+#define WM831X_BATT_OV_STS 0x8000 /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_MASK 0x8000 /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_SHIFT 15 /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_WIDTH 1 /* BATT_OV_STS */
+#define WM831X_CHG_STATE_MASK 0x7000 /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_SHIFT 12 /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_WIDTH 3 /* CHG_STATE - [14:12] */
+#define WM831X_BATT_HOT_STS 0x0800 /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_MASK 0x0800 /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_SHIFT 11 /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_WIDTH 1 /* BATT_HOT_STS */
+#define WM831X_BATT_COLD_STS 0x0400 /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_MASK 0x0400 /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_SHIFT 10 /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_WIDTH 1 /* BATT_COLD_STS */
+#define WM831X_CHG_TOPOFF 0x0200 /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_MASK 0x0200 /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_SHIFT 9 /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_WIDTH 1 /* CHG_TOPOFF */
+#define WM831X_CHG_ACTIVE 0x0100 /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_MASK 0x0100 /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_SHIFT 8 /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_WIDTH 1 /* CHG_ACTIVE */
+#define WM831X_CHG_TIME_ELAPSED_MASK 0x00FF /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_SHIFT 0 /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_WIDTH 8 /* CHG_TIME_ELAPSED - [7:0] */
+
+#define WM831X_CHG_STATE_OFF (0 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE (1 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST (2 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE_OT (3 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST_OT (4 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_DEFECTIVE (5 << WM831X_CHG_STATE_SHIFT)
+
+/*
+ * R16459 (0x404B) - Backup Charger Control
+ */
+#define WM831X_BKUP_CHG_ENA 0x8000 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_MASK 0x8000 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_SHIFT 15 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_WIDTH 1 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_STS 0x4000 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_MASK 0x4000 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_SHIFT 14 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_WIDTH 1 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_MODE 0x1000 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_MASK 0x1000 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_SHIFT 12 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_WIDTH 1 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_BATT_DET_ENA 0x0800 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_MASK 0x0800 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_SHIFT 11 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_WIDTH 1 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_STS 0x0400 /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_MASK 0x0400 /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_SHIFT 10 /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_WIDTH 1 /* BKUP_BATT_STS */
+#define WM831X_BKUP_CHG_VLIM 0x0010 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_MASK 0x0010 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_SHIFT 4 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_WIDTH 1 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_ILIM_MASK 0x0003 /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_SHIFT 0 /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_WIDTH 2 /* BKUP_CHG_ILIM - [1:0] */
+
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (14 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 15/22] power_supply: Add driver for the PMU on WM831x PMICs Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-28 14:21 ` [PATCH 17/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 17/22] regulator: Add WM831x LDO support Mark Brown
` (6 subsequent siblings)
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of devices all have 3 DC-DC buck convertors. This
driver implements software control for these regulators via the
regulator API. Use with split hardware/software control of individual
regulators is not supported, though regulators not controlled by
software may be controlled via the hardware control interfaces.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/wm831x-dcdc.c | 643 ++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/regulator.h | 571 ++++++++++++++++++++++++++++++
4 files changed, 1222 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/wm831x-dcdc.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index da7483e..38ea5dc 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -82,6 +82,13 @@ config REGULATOR_TWL4030
This driver supports the voltage regulators provided by
this family of companion chips.
+config REGULATOR_WM831X
+ tristate "Wolfson Microelcronics WM831x PMIC regulators"
+ depends on MFD_WM831X
+ help
+ Support the voltage and current regulators of the WM831x series
+ of PMIC devices.
+
config REGULATOR_WM8350
tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
depends on MFD_WM8350
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3a9748f..b1d2b82 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
new file mode 100644
index 0000000..97a7877
--- /dev/null
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -0,0 +1,643 @@
+/*
+ * wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_BUCKV_MAX_SELECTOR 0x68
+#define WM831X_BUCKP_MAX_SELECTOR 0x66
+
+#define WM831X_DCDC_MODE_FAST 0
+#define WM831X_DCDC_MODE_NORMAL 1
+#define WM831X_DCDC_MODE_IDLE 2
+#define WM831X_DCDC_MODE_STANDBY 3
+
+#define WM831X_DCDC_MAX_NAME 6
+
+/* Register offsets in control block */
+#define WM831X_DCDC_CONTROL_1 0
+#define WM831X_DCDC_CONTROL_2 1
+#define WM831X_DCDC_ON_CONFIG 2
+#define WM831X_DCDC_SLEEP_CONTROL 3
+
+/*
+ * Shared
+ */
+
+struct wm831x_dcdc {
+ char name[WM831X_DCDC_MAX_NAME];
+ struct regulator_desc desc;
+ int base;
+ struct wm831x *wm831x;
+ struct regulator_dev *regulator;
+};
+
+static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int reg;
+
+ reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE);
+ if (reg < 0)
+ return reg;
+
+ if (reg & mask)
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_dcdc_enable(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask);
+}
+
+static int wm831x_dcdc_disable(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0);
+}
+
+static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev)
+
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT;
+
+ switch (val) {
+ case WM831X_DCDC_MODE_FAST:
+ return REGULATOR_MODE_FAST;
+ case WM831X_DCDC_MODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case WM831X_DCDC_MODE_STANDBY:
+ return REGULATOR_MODE_STANDBY;
+ case WM831X_DCDC_MODE_IDLE:
+ return REGULATOR_MODE_IDLE;
+ default:
+ BUG();
+ }
+}
+
+static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg,
+ unsigned int mode)
+{
+ int val;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = WM831X_DCDC_MODE_FAST;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = WM831X_DCDC_MODE_NORMAL;
+ break;
+ case REGULATOR_MODE_STANDBY:
+ val = WM831X_DCDC_MODE_STANDBY;
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = WM831X_DCDC_MODE_IDLE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK,
+ val << WM831X_DC1_ON_MODE_SHIFT);
+}
+
+static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+ return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+ return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int ret;
+
+ /* First, check for errors */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & (1 << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+
+ /* DCDC1 and DCDC2 can additionally detect high voltage/current */
+ if (rdev_get_id(rdev) < 2) {
+ if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d over voltage\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+
+ if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d over current\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+ }
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+ if (ret < 0)
+ return ret;
+ if (!(ret & (1 << rdev_get_id(rdev))))
+ return REGULATOR_STATUS_OFF;
+
+ /* TODO: When we handle hardware control modes so we can report the
+ * current mode. */
+ return REGULATOR_STATUS_ON;
+}
+
+static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data)
+{
+ struct wm831x_dcdc *dcdc = data;
+
+ regulator_notifier_call_chain(dcdc->regulator,
+ REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
+{
+ struct wm831x_dcdc *dcdc = data;
+
+ regulator_notifier_call_chain(dcdc->regulator,
+ REGULATOR_EVENT_OVER_CURRENT,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * BUCKV specifics
+ */
+
+static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ if (selector <= 0x8)
+ return 600000;
+ if (selector <= WM831X_BUCKV_MAX_SELECTOR)
+ return 600000 + ((selector - 0x8) * 12500);
+ return -EINVAL;
+}
+
+static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 vsel;
+
+ if (min_uV < 600000)
+ vsel = 0;
+ else if (min_uV <= 1800000)
+ vsel = ((min_uV - 600000) / 12500) + 8;
+ else
+ return -EINVAL;
+
+ if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+ return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+ return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);
+}
+
+/* Current limit options */
+static u16 wm831x_dcdc_ilim[] = {
+ 125, 250, 375, 500, 625, 750, 875, 1000
+};
+
+static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) {
+ if (max_uA <= wm831x_dcdc_ilim[i])
+ break;
+ }
+ if (i == ARRAY_SIZE(wm831x_dcdc_ilim))
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i);
+}
+
+static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK];
+}
+
+static struct regulator_ops wm831x_buckv_ops = {
+ .set_voltage = wm831x_buckv_set_voltage,
+ .get_voltage = wm831x_buckv_get_voltage,
+ .list_voltage = wm831x_buckv_list_voltage,
+ .set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
+ .set_current_limit = wm831x_buckv_set_current_limit,
+ .get_current_limit = wm831x_buckv_get_current_limit,
+
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+ .get_status = wm831x_dcdc_get_status,
+ .get_mode = wm831x_dcdc_get_mode,
+ .set_mode = wm831x_dcdc_set_mode,
+ .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+ struct wm831x_dcdc *dcdc;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+ if (pdata->dcdc[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ dcdc->base = res->start;
+
+ snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
+ dcdc->desc.ops = &wm831x_buckv_ops;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->dcdc[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ irq = platform_get_irq_byname(pdev, "HC");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
+ irq, ret);
+ goto err_uv;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err_uv:
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+err_regulator:
+ regulator_unregister(dcdc->regulator);
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_buckv_driver = {
+ .probe = wm831x_buckv_probe,
+ .remove = __devexit_p(wm831x_buckv_remove),
+ .driver = {
+ .name = "wm831x-buckv",
+ },
+};
+
+/*
+ * BUCKP specifics
+ */
+
+static int wm831x_buckp_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ if (selector <= WM831X_BUCKP_MAX_SELECTOR)
+ return 850000 + (selector * 25000);
+ else
+ return -EINVAL;
+}
+
+static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 vsel;
+
+ if (min_uV <= 34000000)
+ vsel = (min_uV - 850000) / 25000;
+ else
+ return -EINVAL;
+
+ if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckp_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+ return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+ return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK);
+}
+
+static struct regulator_ops wm831x_buckp_ops = {
+ .set_voltage = wm831x_buckp_set_voltage,
+ .get_voltage = wm831x_buckp_get_voltage,
+ .list_voltage = wm831x_buckp_list_voltage,
+ .set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
+
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+ .get_status = wm831x_dcdc_get_status,
+ .get_mode = wm831x_dcdc_get_mode,
+ .set_mode = wm831x_dcdc_set_mode,
+ .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+ struct wm831x_dcdc *dcdc;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+ if (pdata->dcdc[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ dcdc->base = res->start;
+
+ snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;
+ dcdc->desc.ops = &wm831x_buckp_ops;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->dcdc[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(dcdc->regulator);
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_buckp_driver = {
+ .probe = wm831x_buckp_probe,
+ .remove = __devexit_p(wm831x_buckp_remove),
+ .driver = {
+ .name = "wm831x-buckp",
+ },
+};
+
+static int __init wm831x_dcdc_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&wm831x_buckv_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x BUCKV driver: %d\n", ret);
+
+ ret = platform_driver_register(&wm831x_buckp_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+
+ return 0;
+}
+subsys_initcall(wm831x_dcdc_init);
+
+static void __exit wm831x_dcdc_exit(void)
+{
+ platform_driver_unregister(&wm831x_buckp_driver);
+ platform_driver_unregister(&wm831x_buckv_driver);
+}
+module_exit(wm831x_dcdc_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-buckv");
+MODULE_ALIAS("platform:wm831x-buckp");
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
index b5d58fb..c74d6aa 100644
--- a/include/linux/mfd/wm831x/regulator.h
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -15,6 +15,577 @@
#ifndef __MFD_WM831X_REGULATOR_H__
#define __MFD_WM831X_REGULATOR_H__
+/*
+ * R16462 (0x404E) - Current Sink 1
+ */
+#define WM831X_CS1_ENA 0x8000 /* CS1_ENA */
+#define WM831X_CS1_ENA_MASK 0x8000 /* CS1_ENA */
+#define WM831X_CS1_ENA_SHIFT 15 /* CS1_ENA */
+#define WM831X_CS1_ENA_WIDTH 1 /* CS1_ENA */
+#define WM831X_CS1_DRIVE 0x4000 /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_MASK 0x4000 /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_SHIFT 14 /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_WIDTH 1 /* CS1_DRIVE */
+#define WM831X_CS1_SLPENA 0x1000 /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_MASK 0x1000 /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_SHIFT 12 /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_WIDTH 1 /* CS1_SLPENA */
+#define WM831X_CS1_OFF_RAMP_MASK 0x0C00 /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_SHIFT 10 /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_WIDTH 2 /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_ON_RAMP_MASK 0x0300 /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_SHIFT 8 /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_WIDTH 2 /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ISEL_MASK 0x003F /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_SHIFT 0 /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_WIDTH 6 /* CS1_ISEL - [5:0] */
+
+/*
+ * R16463 (0x404F) - Current Sink 2
+ */
+#define WM831X_CS2_ENA 0x8000 /* CS2_ENA */
+#define WM831X_CS2_ENA_MASK 0x8000 /* CS2_ENA */
+#define WM831X_CS2_ENA_SHIFT 15 /* CS2_ENA */
+#define WM831X_CS2_ENA_WIDTH 1 /* CS2_ENA */
+#define WM831X_CS2_DRIVE 0x4000 /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_MASK 0x4000 /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_SHIFT 14 /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_WIDTH 1 /* CS2_DRIVE */
+#define WM831X_CS2_SLPENA 0x1000 /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_MASK 0x1000 /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_SHIFT 12 /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_WIDTH 1 /* CS2_SLPENA */
+#define WM831X_CS2_OFF_RAMP_MASK 0x0C00 /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_SHIFT 10 /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_WIDTH 2 /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_ON_RAMP_MASK 0x0300 /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_SHIFT 8 /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_WIDTH 2 /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ISEL_MASK 0x003F /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_SHIFT 0 /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_WIDTH 6 /* CS2_ISEL - [5:0] */
+
+/*
+ * R16464 (0x4050) - DCDC Enable
+ */
+#define WM831X_EPE2_ENA 0x0080 /* EPE2_ENA */
+#define WM831X_EPE2_ENA_MASK 0x0080 /* EPE2_ENA */
+#define WM831X_EPE2_ENA_SHIFT 7 /* EPE2_ENA */
+#define WM831X_EPE2_ENA_WIDTH 1 /* EPE2_ENA */
+#define WM831X_EPE1_ENA 0x0040 /* EPE1_ENA */
+#define WM831X_EPE1_ENA_MASK 0x0040 /* EPE1_ENA */
+#define WM831X_EPE1_ENA_SHIFT 6 /* EPE1_ENA */
+#define WM831X_EPE1_ENA_WIDTH 1 /* EPE1_ENA */
+#define WM831X_DC4_ENA 0x0008 /* DC4_ENA */
+#define WM831X_DC4_ENA_MASK 0x0008 /* DC4_ENA */
+#define WM831X_DC4_ENA_SHIFT 3 /* DC4_ENA */
+#define WM831X_DC4_ENA_WIDTH 1 /* DC4_ENA */
+#define WM831X_DC3_ENA 0x0004 /* DC3_ENA */
+#define WM831X_DC3_ENA_MASK 0x0004 /* DC3_ENA */
+#define WM831X_DC3_ENA_SHIFT 2 /* DC3_ENA */
+#define WM831X_DC3_ENA_WIDTH 1 /* DC3_ENA */
+#define WM831X_DC2_ENA 0x0002 /* DC2_ENA */
+#define WM831X_DC2_ENA_MASK 0x0002 /* DC2_ENA */
+#define WM831X_DC2_ENA_SHIFT 1 /* DC2_ENA */
+#define WM831X_DC2_ENA_WIDTH 1 /* DC2_ENA */
+#define WM831X_DC1_ENA 0x0001 /* DC1_ENA */
+#define WM831X_DC1_ENA_MASK 0x0001 /* DC1_ENA */
+#define WM831X_DC1_ENA_SHIFT 0 /* DC1_ENA */
+#define WM831X_DC1_ENA_WIDTH 1 /* DC1_ENA */
+
+/*
+ * R16465 (0x4051) - LDO Enable
+ */
+#define WM831X_LDO11_ENA 0x0400 /* LDO11_ENA */
+#define WM831X_LDO11_ENA_MASK 0x0400 /* LDO11_ENA */
+#define WM831X_LDO11_ENA_SHIFT 10 /* LDO11_ENA */
+#define WM831X_LDO11_ENA_WIDTH 1 /* LDO11_ENA */
+#define WM831X_LDO10_ENA 0x0200 /* LDO10_ENA */
+#define WM831X_LDO10_ENA_MASK 0x0200 /* LDO10_ENA */
+#define WM831X_LDO10_ENA_SHIFT 9 /* LDO10_ENA */
+#define WM831X_LDO10_ENA_WIDTH 1 /* LDO10_ENA */
+#define WM831X_LDO9_ENA 0x0100 /* LDO9_ENA */
+#define WM831X_LDO9_ENA_MASK 0x0100 /* LDO9_ENA */
+#define WM831X_LDO9_ENA_SHIFT 8 /* LDO9_ENA */
+#define WM831X_LDO9_ENA_WIDTH 1 /* LDO9_ENA */
+#define WM831X_LDO8_ENA 0x0080 /* LDO8_ENA */
+#define WM831X_LDO8_ENA_MASK 0x0080 /* LDO8_ENA */
+#define WM831X_LDO8_ENA_SHIFT 7 /* LDO8_ENA */
+#define WM831X_LDO8_ENA_WIDTH 1 /* LDO8_ENA */
+#define WM831X_LDO7_ENA 0x0040 /* LDO7_ENA */
+#define WM831X_LDO7_ENA_MASK 0x0040 /* LDO7_ENA */
+#define WM831X_LDO7_ENA_SHIFT 6 /* LDO7_ENA */
+#define WM831X_LDO7_ENA_WIDTH 1 /* LDO7_ENA */
+#define WM831X_LDO6_ENA 0x0020 /* LDO6_ENA */
+#define WM831X_LDO6_ENA_MASK 0x0020 /* LDO6_ENA */
+#define WM831X_LDO6_ENA_SHIFT 5 /* LDO6_ENA */
+#define WM831X_LDO6_ENA_WIDTH 1 /* LDO6_ENA */
+#define WM831X_LDO5_ENA 0x0010 /* LDO5_ENA */
+#define WM831X_LDO5_ENA_MASK 0x0010 /* LDO5_ENA */
+#define WM831X_LDO5_ENA_SHIFT 4 /* LDO5_ENA */
+#define WM831X_LDO5_ENA_WIDTH 1 /* LDO5_ENA */
+#define WM831X_LDO4_ENA 0x0008 /* LDO4_ENA */
+#define WM831X_LDO4_ENA_MASK 0x0008 /* LDO4_ENA */
+#define WM831X_LDO4_ENA_SHIFT 3 /* LDO4_ENA */
+#define WM831X_LDO4_ENA_WIDTH 1 /* LDO4_ENA */
+#define WM831X_LDO3_ENA 0x0004 /* LDO3_ENA */
+#define WM831X_LDO3_ENA_MASK 0x0004 /* LDO3_ENA */
+#define WM831X_LDO3_ENA_SHIFT 2 /* LDO3_ENA */
+#define WM831X_LDO3_ENA_WIDTH 1 /* LDO3_ENA */
+#define WM831X_LDO2_ENA 0x0002 /* LDO2_ENA */
+#define WM831X_LDO2_ENA_MASK 0x0002 /* LDO2_ENA */
+#define WM831X_LDO2_ENA_SHIFT 1 /* LDO2_ENA */
+#define WM831X_LDO2_ENA_WIDTH 1 /* LDO2_ENA */
+#define WM831X_LDO1_ENA 0x0001 /* LDO1_ENA */
+#define WM831X_LDO1_ENA_MASK 0x0001 /* LDO1_ENA */
+#define WM831X_LDO1_ENA_SHIFT 0 /* LDO1_ENA */
+#define WM831X_LDO1_ENA_WIDTH 1 /* LDO1_ENA */
+
+/*
+ * R16466 (0x4052) - DCDC Status
+ */
+#define WM831X_EPE2_STS 0x0080 /* EPE2_STS */
+#define WM831X_EPE2_STS_MASK 0x0080 /* EPE2_STS */
+#define WM831X_EPE2_STS_SHIFT 7 /* EPE2_STS */
+#define WM831X_EPE2_STS_WIDTH 1 /* EPE2_STS */
+#define WM831X_EPE1_STS 0x0040 /* EPE1_STS */
+#define WM831X_EPE1_STS_MASK 0x0040 /* EPE1_STS */
+#define WM831X_EPE1_STS_SHIFT 6 /* EPE1_STS */
+#define WM831X_EPE1_STS_WIDTH 1 /* EPE1_STS */
+#define WM831X_DC4_STS 0x0008 /* DC4_STS */
+#define WM831X_DC4_STS_MASK 0x0008 /* DC4_STS */
+#define WM831X_DC4_STS_SHIFT 3 /* DC4_STS */
+#define WM831X_DC4_STS_WIDTH 1 /* DC4_STS */
+#define WM831X_DC3_STS 0x0004 /* DC3_STS */
+#define WM831X_DC3_STS_MASK 0x0004 /* DC3_STS */
+#define WM831X_DC3_STS_SHIFT 2 /* DC3_STS */
+#define WM831X_DC3_STS_WIDTH 1 /* DC3_STS */
+#define WM831X_DC2_STS 0x0002 /* DC2_STS */
+#define WM831X_DC2_STS_MASK 0x0002 /* DC2_STS */
+#define WM831X_DC2_STS_SHIFT 1 /* DC2_STS */
+#define WM831X_DC2_STS_WIDTH 1 /* DC2_STS */
+#define WM831X_DC1_STS 0x0001 /* DC1_STS */
+#define WM831X_DC1_STS_MASK 0x0001 /* DC1_STS */
+#define WM831X_DC1_STS_SHIFT 0 /* DC1_STS */
+#define WM831X_DC1_STS_WIDTH 1 /* DC1_STS */
+
+/*
+ * R16467 (0x4053) - LDO Status
+ */
+#define WM831X_LDO11_STS 0x0400 /* LDO11_STS */
+#define WM831X_LDO11_STS_MASK 0x0400 /* LDO11_STS */
+#define WM831X_LDO11_STS_SHIFT 10 /* LDO11_STS */
+#define WM831X_LDO11_STS_WIDTH 1 /* LDO11_STS */
+#define WM831X_LDO10_STS 0x0200 /* LDO10_STS */
+#define WM831X_LDO10_STS_MASK 0x0200 /* LDO10_STS */
+#define WM831X_LDO10_STS_SHIFT 9 /* LDO10_STS */
+#define WM831X_LDO10_STS_WIDTH 1 /* LDO10_STS */
+#define WM831X_LDO9_STS 0x0100 /* LDO9_STS */
+#define WM831X_LDO9_STS_MASK 0x0100 /* LDO9_STS */
+#define WM831X_LDO9_STS_SHIFT 8 /* LDO9_STS */
+#define WM831X_LDO9_STS_WIDTH 1 /* LDO9_STS */
+#define WM831X_LDO8_STS 0x0080 /* LDO8_STS */
+#define WM831X_LDO8_STS_MASK 0x0080 /* LDO8_STS */
+#define WM831X_LDO8_STS_SHIFT 7 /* LDO8_STS */
+#define WM831X_LDO8_STS_WIDTH 1 /* LDO8_STS */
+#define WM831X_LDO7_STS 0x0040 /* LDO7_STS */
+#define WM831X_LDO7_STS_MASK 0x0040 /* LDO7_STS */
+#define WM831X_LDO7_STS_SHIFT 6 /* LDO7_STS */
+#define WM831X_LDO7_STS_WIDTH 1 /* LDO7_STS */
+#define WM831X_LDO6_STS 0x0020 /* LDO6_STS */
+#define WM831X_LDO6_STS_MASK 0x0020 /* LDO6_STS */
+#define WM831X_LDO6_STS_SHIFT 5 /* LDO6_STS */
+#define WM831X_LDO6_STS_WIDTH 1 /* LDO6_STS */
+#define WM831X_LDO5_STS 0x0010 /* LDO5_STS */
+#define WM831X_LDO5_STS_MASK 0x0010 /* LDO5_STS */
+#define WM831X_LDO5_STS_SHIFT 4 /* LDO5_STS */
+#define WM831X_LDO5_STS_WIDTH 1 /* LDO5_STS */
+#define WM831X_LDO4_STS 0x0008 /* LDO4_STS */
+#define WM831X_LDO4_STS_MASK 0x0008 /* LDO4_STS */
+#define WM831X_LDO4_STS_SHIFT 3 /* LDO4_STS */
+#define WM831X_LDO4_STS_WIDTH 1 /* LDO4_STS */
+#define WM831X_LDO3_STS 0x0004 /* LDO3_STS */
+#define WM831X_LDO3_STS_MASK 0x0004 /* LDO3_STS */
+#define WM831X_LDO3_STS_SHIFT 2 /* LDO3_STS */
+#define WM831X_LDO3_STS_WIDTH 1 /* LDO3_STS */
+#define WM831X_LDO2_STS 0x0002 /* LDO2_STS */
+#define WM831X_LDO2_STS_MASK 0x0002 /* LDO2_STS */
+#define WM831X_LDO2_STS_SHIFT 1 /* LDO2_STS */
+#define WM831X_LDO2_STS_WIDTH 1 /* LDO2_STS */
+#define WM831X_LDO1_STS 0x0001 /* LDO1_STS */
+#define WM831X_LDO1_STS_MASK 0x0001 /* LDO1_STS */
+#define WM831X_LDO1_STS_SHIFT 0 /* LDO1_STS */
+#define WM831X_LDO1_STS_WIDTH 1 /* LDO1_STS */
+
+/*
+ * R16468 (0x4054) - DCDC UV Status
+ */
+#define WM831X_DC2_OV_STS 0x2000 /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_MASK 0x2000 /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_SHIFT 13 /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_WIDTH 1 /* DC2_OV_STS */
+#define WM831X_DC1_OV_STS 0x1000 /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_MASK 0x1000 /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_SHIFT 12 /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_WIDTH 1 /* DC1_OV_STS */
+#define WM831X_DC2_HC_STS 0x0200 /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_MASK 0x0200 /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_SHIFT 9 /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_WIDTH 1 /* DC2_HC_STS */
+#define WM831X_DC1_HC_STS 0x0100 /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_MASK 0x0100 /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_SHIFT 8 /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_WIDTH 1 /* DC1_HC_STS */
+#define WM831X_DC4_UV_STS 0x0008 /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_MASK 0x0008 /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_SHIFT 3 /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_WIDTH 1 /* DC4_UV_STS */
+#define WM831X_DC3_UV_STS 0x0004 /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_MASK 0x0004 /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_SHIFT 2 /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_WIDTH 1 /* DC3_UV_STS */
+#define WM831X_DC2_UV_STS 0x0002 /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_MASK 0x0002 /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_SHIFT 1 /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_WIDTH 1 /* DC2_UV_STS */
+#define WM831X_DC1_UV_STS 0x0001 /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_MASK 0x0001 /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_SHIFT 0 /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_WIDTH 1 /* DC1_UV_STS */
+
+/*
+ * R16469 (0x4055) - LDO UV Status
+ */
+#define WM831X_INTLDO_UV_STS 0x8000 /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_MASK 0x8000 /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_SHIFT 15 /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_WIDTH 1 /* INTLDO_UV_STS */
+#define WM831X_LDO10_UV_STS 0x0200 /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_MASK 0x0200 /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_SHIFT 9 /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_WIDTH 1 /* LDO10_UV_STS */
+#define WM831X_LDO9_UV_STS 0x0100 /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_MASK 0x0100 /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_SHIFT 8 /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_WIDTH 1 /* LDO9_UV_STS */
+#define WM831X_LDO8_UV_STS 0x0080 /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_MASK 0x0080 /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_SHIFT 7 /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_WIDTH 1 /* LDO8_UV_STS */
+#define WM831X_LDO7_UV_STS 0x0040 /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_MASK 0x0040 /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_SHIFT 6 /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_WIDTH 1 /* LDO7_UV_STS */
+#define WM831X_LDO6_UV_STS 0x0020 /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_MASK 0x0020 /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_SHIFT 5 /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_WIDTH 1 /* LDO6_UV_STS */
+#define WM831X_LDO5_UV_STS 0x0010 /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_MASK 0x0010 /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_SHIFT 4 /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_WIDTH 1 /* LDO5_UV_STS */
+#define WM831X_LDO4_UV_STS 0x0008 /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_MASK 0x0008 /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_SHIFT 3 /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_WIDTH 1 /* LDO4_UV_STS */
+#define WM831X_LDO3_UV_STS 0x0004 /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_MASK 0x0004 /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_SHIFT 2 /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_WIDTH 1 /* LDO3_UV_STS */
+#define WM831X_LDO2_UV_STS 0x0002 /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_MASK 0x0002 /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_SHIFT 1 /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_WIDTH 1 /* LDO2_UV_STS */
+#define WM831X_LDO1_UV_STS 0x0001 /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_MASK 0x0001 /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_SHIFT 0 /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_WIDTH 1 /* LDO1_UV_STS */
+
+/*
+ * R16470 (0x4056) - DC1 Control 1
+ */
+#define WM831X_DC1_RATE_MASK 0xC000 /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_SHIFT 14 /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_WIDTH 2 /* DC1_RATE - [15:14] */
+#define WM831X_DC1_PHASE 0x1000 /* DC1_PHASE */
+#define WM831X_DC1_PHASE_MASK 0x1000 /* DC1_PHASE */
+#define WM831X_DC1_PHASE_SHIFT 12 /* DC1_PHASE */
+#define WM831X_DC1_PHASE_WIDTH 1 /* DC1_PHASE */
+#define WM831X_DC1_FREQ_MASK 0x0300 /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_SHIFT 8 /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_WIDTH 2 /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FLT 0x0080 /* DC1_FLT */
+#define WM831X_DC1_FLT_MASK 0x0080 /* DC1_FLT */
+#define WM831X_DC1_FLT_SHIFT 7 /* DC1_FLT */
+#define WM831X_DC1_FLT_WIDTH 1 /* DC1_FLT */
+#define WM831X_DC1_SOFT_START_MASK 0x0030 /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_SHIFT 4 /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_WIDTH 2 /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_CAP_MASK 0x0003 /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_SHIFT 0 /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_WIDTH 2 /* DC1_CAP - [1:0] */
+
+/*
+ * R16471 (0x4057) - DC1 Control 2
+ */
+#define WM831X_DC1_ERR_ACT_MASK 0xC000 /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_SHIFT 14 /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_WIDTH 2 /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_HWC_SRC_MASK 0x1800 /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_SHIFT 11 /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_WIDTH 2 /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_VSEL 0x0400 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_MASK 0x0400 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_SHIFT 10 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_WIDTH 1 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_MODE_MASK 0x0300 /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_SHIFT 8 /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_WIDTH 2 /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HC_THR_MASK 0x0070 /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_SHIFT 4 /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_WIDTH 3 /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_IND_ENA 0x0001 /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_MASK 0x0001 /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_SHIFT 0 /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_WIDTH 1 /* DC1_HC_IND_ENA */
+
+/*
+ * R16472 (0x4058) - DC1 ON Config
+ */
+#define WM831X_DC1_ON_SLOT_MASK 0xE000 /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_SHIFT 13 /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_WIDTH 3 /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_MODE_MASK 0x0300 /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_SHIFT 8 /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_WIDTH 2 /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_VSEL_MASK 0x007F /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_SHIFT 0 /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_WIDTH 7 /* DC1_ON_VSEL - [6:0] */
+
+/*
+ * R16473 (0x4059) - DC1 SLEEP Control
+ */
+#define WM831X_DC1_SLP_SLOT_MASK 0xE000 /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_SHIFT 13 /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_WIDTH 3 /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_MODE_MASK 0x0300 /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_SHIFT 8 /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_WIDTH 2 /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_VSEL_MASK 0x007F /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_SHIFT 0 /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_WIDTH 7 /* DC1_SLP_VSEL - [6:0] */
+
+/*
+ * R16474 (0x405A) - DC1 DVS Control
+ */
+#define WM831X_DC1_DVS_SRC_MASK 0x1800 /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_SHIFT 11 /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_WIDTH 2 /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_VSEL_MASK 0x007F /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_SHIFT 0 /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_WIDTH 7 /* DC1_DVS_VSEL - [6:0] */
+
+/*
+ * R16475 (0x405B) - DC2 Control 1
+ */
+#define WM831X_DC2_RATE_MASK 0xC000 /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_SHIFT 14 /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_WIDTH 2 /* DC2_RATE - [15:14] */
+#define WM831X_DC2_PHASE 0x1000 /* DC2_PHASE */
+#define WM831X_DC2_PHASE_MASK 0x1000 /* DC2_PHASE */
+#define WM831X_DC2_PHASE_SHIFT 12 /* DC2_PHASE */
+#define WM831X_DC2_PHASE_WIDTH 1 /* DC2_PHASE */
+#define WM831X_DC2_FREQ_MASK 0x0300 /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_SHIFT 8 /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_WIDTH 2 /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FLT 0x0080 /* DC2_FLT */
+#define WM831X_DC2_FLT_MASK 0x0080 /* DC2_FLT */
+#define WM831X_DC2_FLT_SHIFT 7 /* DC2_FLT */
+#define WM831X_DC2_FLT_WIDTH 1 /* DC2_FLT */
+#define WM831X_DC2_SOFT_START_MASK 0x0030 /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_SHIFT 4 /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_WIDTH 2 /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_CAP_MASK 0x0003 /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_SHIFT 0 /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_WIDTH 2 /* DC2_CAP - [1:0] */
+
+/*
+ * R16476 (0x405C) - DC2 Control 2
+ */
+#define WM831X_DC2_ERR_ACT_MASK 0xC000 /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_SHIFT 14 /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_WIDTH 2 /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_HWC_SRC_MASK 0x1800 /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_SHIFT 11 /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_WIDTH 2 /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_VSEL 0x0400 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_MASK 0x0400 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_SHIFT 10 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_WIDTH 1 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_MODE_MASK 0x0300 /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_SHIFT 8 /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_WIDTH 2 /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HC_THR_MASK 0x0070 /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_SHIFT 4 /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_WIDTH 3 /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_IND_ENA 0x0001 /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_MASK 0x0001 /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_SHIFT 0 /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_WIDTH 1 /* DC2_HC_IND_ENA */
+
+/*
+ * R16477 (0x405D) - DC2 ON Config
+ */
+#define WM831X_DC2_ON_SLOT_MASK 0xE000 /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_SHIFT 13 /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_WIDTH 3 /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_MODE_MASK 0x0300 /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_SHIFT 8 /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_WIDTH 2 /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_VSEL_MASK 0x007F /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_SHIFT 0 /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_WIDTH 7 /* DC2_ON_VSEL - [6:0] */
+
+/*
+ * R16478 (0x405E) - DC2 SLEEP Control
+ */
+#define WM831X_DC2_SLP_SLOT_MASK 0xE000 /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_SHIFT 13 /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_WIDTH 3 /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_MODE_MASK 0x0300 /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_SHIFT 8 /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_WIDTH 2 /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_VSEL_MASK 0x007F /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_SHIFT 0 /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_WIDTH 7 /* DC2_SLP_VSEL - [6:0] */
+
+/*
+ * R16479 (0x405F) - DC2 DVS Control
+ */
+#define WM831X_DC2_DVS_SRC_MASK 0x1800 /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_SHIFT 11 /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_WIDTH 2 /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_VSEL_MASK 0x007F /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_SHIFT 0 /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_WIDTH 7 /* DC2_DVS_VSEL - [6:0] */
+
+/*
+ * R16480 (0x4060) - DC3 Control 1
+ */
+#define WM831X_DC3_PHASE 0x1000 /* DC3_PHASE */
+#define WM831X_DC3_PHASE_MASK 0x1000 /* DC3_PHASE */
+#define WM831X_DC3_PHASE_SHIFT 12 /* DC3_PHASE */
+#define WM831X_DC3_PHASE_WIDTH 1 /* DC3_PHASE */
+#define WM831X_DC3_FLT 0x0080 /* DC3_FLT */
+#define WM831X_DC3_FLT_MASK 0x0080 /* DC3_FLT */
+#define WM831X_DC3_FLT_SHIFT 7 /* DC3_FLT */
+#define WM831X_DC3_FLT_WIDTH 1 /* DC3_FLT */
+#define WM831X_DC3_SOFT_START_MASK 0x0030 /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_SHIFT 4 /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_WIDTH 2 /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_STNBY_LIM_MASK 0x000C /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_SHIFT 2 /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_WIDTH 2 /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_CAP_MASK 0x0003 /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_SHIFT 0 /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_WIDTH 2 /* DC3_CAP - [1:0] */
+
+/*
+ * R16481 (0x4061) - DC3 Control 2
+ */
+#define WM831X_DC3_ERR_ACT_MASK 0xC000 /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_SHIFT 14 /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_WIDTH 2 /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_HWC_SRC_MASK 0x1800 /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_SHIFT 11 /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_WIDTH 2 /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_VSEL 0x0400 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_MASK 0x0400 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_SHIFT 10 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_WIDTH 1 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_MODE_MASK 0x0300 /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_SHIFT 8 /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_WIDTH 2 /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_OVP 0x0080 /* DC3_OVP */
+#define WM831X_DC3_OVP_MASK 0x0080 /* DC3_OVP */
+#define WM831X_DC3_OVP_SHIFT 7 /* DC3_OVP */
+#define WM831X_DC3_OVP_WIDTH 1 /* DC3_OVP */
+
+/*
+ * R16482 (0x4062) - DC3 ON Config
+ */
+#define WM831X_DC3_ON_SLOT_MASK 0xE000 /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_SHIFT 13 /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_WIDTH 3 /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_MODE_MASK 0x0300 /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_SHIFT 8 /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_WIDTH 2 /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_VSEL_MASK 0x007F /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_SHIFT 0 /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_WIDTH 7 /* DC3_ON_VSEL - [6:0] */
+
+/*
+ * R16483 (0x4063) - DC3 SLEEP Control
+ */
+#define WM831X_DC3_SLP_SLOT_MASK 0xE000 /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_SHIFT 13 /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_WIDTH 3 /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_MODE_MASK 0x0300 /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_SHIFT 8 /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_WIDTH 2 /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_VSEL_MASK 0x007F /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_SHIFT 0 /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_WIDTH 7 /* DC3_SLP_VSEL - [6:0] */
+
+/*
+ * R16484 (0x4064) - DC4 Control
+ */
+#define WM831X_DC4_ERR_ACT_MASK 0xC000 /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_SHIFT 14 /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_WIDTH 2 /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_HWC_SRC_MASK 0x1800 /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_SHIFT 11 /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_WIDTH 2 /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_MODE 0x0100 /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_MASK 0x0100 /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_SHIFT 8 /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_WIDTH 1 /* DC4_HWC_MODE */
+#define WM831X_DC4_RANGE_MASK 0x000C /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_SHIFT 2 /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_WIDTH 2 /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_FBSRC 0x0001 /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_MASK 0x0001 /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_SHIFT 0 /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_WIDTH 1 /* DC4_FBSRC */
+
+/*
+ * R16485 (0x4065) - DC4 SLEEP Control
+ */
+#define WM831X_DC4_SLPENA 0x0100 /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_MASK 0x0100 /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_SHIFT 8 /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_WIDTH 1 /* DC4_SLPENA */
+
+/*
+ * R16526 (0x408E) - Power Good Source 1
+ */
+#define WM831X_DC4_OK 0x0008 /* DC4_OK */
+#define WM831X_DC4_OK_MASK 0x0008 /* DC4_OK */
+#define WM831X_DC4_OK_SHIFT 3 /* DC4_OK */
+#define WM831X_DC4_OK_WIDTH 1 /* DC4_OK */
+#define WM831X_DC3_OK 0x0004 /* DC3_OK */
+#define WM831X_DC3_OK_MASK 0x0004 /* DC3_OK */
+#define WM831X_DC3_OK_SHIFT 2 /* DC3_OK */
+#define WM831X_DC3_OK_WIDTH 1 /* DC3_OK */
+#define WM831X_DC2_OK 0x0002 /* DC2_OK */
+#define WM831X_DC2_OK_MASK 0x0002 /* DC2_OK */
+#define WM831X_DC2_OK_SHIFT 1 /* DC2_OK */
+#define WM831X_DC2_OK_WIDTH 1 /* DC2_OK */
+#define WM831X_DC1_OK 0x0001 /* DC1_OK */
+#define WM831X_DC1_OK_MASK 0x0001 /* DC1_OK */
+#define WM831X_DC1_OK_SHIFT 0 /* DC1_OK */
+#define WM831X_DC1_OK_WIDTH 1 /* DC1_OK */
+
#define WM831X_ISINK_MAX_ISEL 56
extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 17/22] regulator: Add WM831x LDO support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (15 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-28 14:22 ` [PATCH 18/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 18/22] regulator: Add WM831x EPE support Mark Brown
` (5 subsequent siblings)
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of devices provide three types of LDO:
- General purpose LDOs supporting voltages from 0.9-3.3V
- High performance analogue LDOs supporting voltages from 1-3.5V
- Very low power consumption LDOs intended to support always on
functionality.
This patch adds support for all three kinds of LDO. Each regulator
is probed as an individual platform device with resources used to
provide the register map location of the regulator. Mixed hardware
and software control of regulators is not current supported.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
drivers/regulator/Makefile | 1 +
drivers/regulator/wm831x-ldo.c | 852 ++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/regulator.h | 626 +++++++++++++++++++++++++
3 files changed, 1479 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/wm831x-ldo.c
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b1d2b82..a0a635f 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
new file mode 100644
index 0000000..f2577b1
--- /dev/null
+++ b/drivers/regulator/wm831x-ldo.c
@@ -0,0 +1,852 @@
+/*
+ * wm831x-ldo.c -- LDO driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_LDO_MAX_NAME 6
+
+#define WM831X_LDO_CONTROL 0
+#define WM831X_LDO_ON_CONTROL 1
+#define WM831X_LDO_SLEEP_CONTROL 2
+
+#define WM831X_ALIVE_LDO_ON_CONTROL 0
+#define WM831X_ALIVE_LDO_SLEEP_CONTROL 1
+
+struct wm831x_ldo {
+ char name[WM831X_LDO_MAX_NAME];
+ struct regulator_desc desc;
+ int base;
+ struct wm831x *wm831x;
+ struct regulator_dev *regulator;
+};
+
+/*
+ * Shared
+ */
+
+static int wm831x_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int reg;
+
+ reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE);
+ if (reg < 0)
+ return reg;
+
+ if (reg & mask)
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_ldo_enable(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask);
+}
+
+static int wm831x_ldo_disable(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0);
+}
+
+static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
+{
+ struct wm831x_ldo *ldo = data;
+
+ regulator_notifier_call_chain(ldo->regulator,
+ REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * General purpose LDOs
+ */
+
+#define WM831X_GP_LDO_SELECTOR_LOW 0xe
+#define WM831X_GP_LDO_MAX_SELECTOR 0x1f
+
+static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ /* 0.9-1.6V in 50mV steps */
+ if (selector <= WM831X_GP_LDO_SELECTOR_LOW)
+ return 900000 + (selector * 50000);
+ /* 1.7-3.3V in 50mV steps */
+ if (selector <= WM831X_GP_LDO_MAX_SELECTOR)
+ return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW)
+ * 100000);
+ return -EINVAL;
+}
+
+static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int vsel, ret;
+
+ if (min_uV < 900000)
+ vsel = 0;
+ else if (min_uV < 1700000)
+ vsel = ((min_uV - 900000) / 50000);
+ else
+ vsel = ((min_uV - 1700000) / 100000)
+ + WM831X_GP_LDO_SELECTOR_LOW + 1;
+
+ ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
+ if (ret < 0)
+ return ret;
+ if (ret < min_uV || ret > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+ return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+ return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_LDO1_ON_VSEL_MASK;
+
+ return wm831x_gp_ldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ unsigned int ret;
+
+ ret = wm831x_reg_read(wm831x, on_reg);
+ if (ret < 0)
+ return 0;
+
+ if (!(ret & WM831X_LDO1_ON_MODE))
+ return REGULATOR_MODE_NORMAL;
+
+ ret = wm831x_reg_read(wm831x, ctrl_reg);
+ if (ret < 0)
+ return 0;
+
+ if (ret & WM831X_LDO1_LP_MODE)
+ return REGULATOR_MODE_STANDBY;
+ else
+ return REGULATOR_MODE_IDLE;
+}
+
+static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO1_ON_MODE, 0);
+ if (ret < 0)
+ return ret;
+ break;
+
+ case REGULATOR_MODE_IDLE:
+ ret = wm831x_set_bits(wm831x, ctrl_reg,
+ WM831X_LDO1_LP_MODE,
+ WM831X_LDO1_LP_MODE);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO1_ON_MODE,
+ WM831X_LDO1_ON_MODE);
+ if (ret < 0)
+ return ret;
+
+ case REGULATOR_MODE_STANDBY:
+ ret = wm831x_set_bits(wm831x, ctrl_reg,
+ WM831X_LDO1_LP_MODE, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO1_ON_MODE,
+ WM831X_LDO1_ON_MODE);
+ if (ret < 0)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int ret;
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+ if (ret < 0)
+ return ret;
+ if (!(ret & mask))
+ return REGULATOR_STATUS_OFF;
+
+ /* Is it reporting under voltage? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+ if (ret & mask)
+ return REGULATOR_STATUS_ERROR;
+
+ ret = wm831x_gp_ldo_get_mode(rdev);
+ if (ret < 0)
+ return ret;
+ else
+ return regulator_mode_to_status(ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
+ int input_uV,
+ int output_uV, int load_uA)
+{
+ if (load_uA < 20000)
+ return REGULATOR_MODE_STANDBY;
+ if (load_uA < 50000)
+ return REGULATOR_MODE_IDLE;
+ return REGULATOR_MODE_NORMAL;
+}
+
+
+static struct regulator_ops wm831x_gp_ldo_ops = {
+ .list_voltage = wm831x_gp_ldo_list_voltage,
+ .get_voltage = wm831x_gp_ldo_get_voltage,
+ .set_voltage = wm831x_gp_ldo_set_voltage,
+ .set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
+ .get_mode = wm831x_gp_ldo_get_mode,
+ .set_mode = wm831x_gp_ldo_set_mode,
+ .get_status = wm831x_gp_ldo_get_status,
+ .get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
+
+ .is_enabled = wm831x_ldo_is_enabled,
+ .enable = wm831x_ldo_enable,
+ .disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+ struct wm831x_ldo *ldo;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+ if (pdata->ldo[id] == NULL)
+ return -ENODEV;
+
+ ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+ if (ldo == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ ldo->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ldo->base = res->start;
+
+ snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+ ldo->desc.name = ldo->name;
+ ldo->desc.id = id;
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
+ ldo->desc.ops = &wm831x_gp_ldo_ops;
+ ldo->desc.owner = THIS_MODULE;
+
+ ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+ pdata->ldo[id], ldo);
+ if (IS_ERR(ldo->regulator)) {
+ ret = PTR_ERR(ldo->regulator);
+ dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+ IRQF_TRIGGER_RISING, ldo->name,
+ ldo);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(ldo->regulator);
+err:
+ kfree(ldo);
+ return ret;
+}
+
+static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
+{
+ struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = ldo->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+ regulator_unregister(ldo->regulator);
+ kfree(ldo);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_gp_ldo_driver = {
+ .probe = wm831x_gp_ldo_probe,
+ .remove = __devexit_p(wm831x_gp_ldo_remove),
+ .driver = {
+ .name = "wm831x-ldo",
+ },
+};
+
+/*
+ * Analogue LDOs
+ */
+
+
+#define WM831X_ALDO_SELECTOR_LOW 0xc
+#define WM831X_ALDO_MAX_SELECTOR 0x1f
+
+static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ /* 1-1.6V in 50mV steps */
+ if (selector <= WM831X_ALDO_SELECTOR_LOW)
+ return 1000000 + (selector * 50000);
+ /* 1.7-3.5V in 50mV steps */
+ if (selector <= WM831X_ALDO_MAX_SELECTOR)
+ return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW)
+ * 100000);
+ return -EINVAL;
+}
+
+static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int vsel, ret;
+
+ if (min_uV < 1000000)
+ vsel = 0;
+ else if (min_uV < 1700000)
+ vsel = ((min_uV - 1000000) / 50000);
+ else
+ vsel = ((min_uV - 1700000) / 100000)
+ + WM831X_ALDO_SELECTOR_LOW + 1;
+
+ ret = wm831x_aldo_list_voltage(rdev, vsel);
+ if (ret < 0)
+ return ret;
+ if (ret < min_uV || ret > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+ return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+ return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_LDO7_ON_VSEL_MASK;
+
+ return wm831x_aldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ unsigned int ret;
+
+ ret = wm831x_reg_read(wm831x, on_reg);
+ if (ret < 0)
+ return 0;
+
+ if (ret & WM831X_LDO7_ON_MODE)
+ return REGULATOR_MODE_IDLE;
+ else
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int wm831x_aldo_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO7_ON_MODE, 0);
+ if (ret < 0)
+ return ret;
+ break;
+
+ case REGULATOR_MODE_IDLE:
+ ret = wm831x_set_bits(wm831x, ctrl_reg,
+ WM831X_LDO7_ON_MODE,
+ WM831X_LDO7_ON_MODE);
+ if (ret < 0)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm831x_aldo_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int ret;
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+ if (ret < 0)
+ return ret;
+ if (!(ret & mask))
+ return REGULATOR_STATUS_OFF;
+
+ /* Is it reporting under voltage? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+ if (ret & mask)
+ return REGULATOR_STATUS_ERROR;
+
+ ret = wm831x_aldo_get_mode(rdev);
+ if (ret < 0)
+ return ret;
+ else
+ return regulator_mode_to_status(ret);
+}
+
+static struct regulator_ops wm831x_aldo_ops = {
+ .list_voltage = wm831x_aldo_list_voltage,
+ .get_voltage = wm831x_aldo_get_voltage,
+ .set_voltage = wm831x_aldo_set_voltage,
+ .set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
+ .get_mode = wm831x_aldo_get_mode,
+ .set_mode = wm831x_aldo_set_mode,
+ .get_status = wm831x_aldo_get_status,
+
+ .is_enabled = wm831x_ldo_is_enabled,
+ .enable = wm831x_ldo_enable,
+ .disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+ struct wm831x_ldo *ldo;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+ if (pdata->ldo[id] == NULL)
+ return -ENODEV;
+
+ ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+ if (ldo == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ ldo->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ldo->base = res->start;
+
+ snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+ ldo->desc.name = ldo->name;
+ ldo->desc.id = id;
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
+ ldo->desc.ops = &wm831x_aldo_ops;
+ ldo->desc.owner = THIS_MODULE;
+
+ ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+ pdata->ldo[id], ldo);
+ if (IS_ERR(ldo->regulator)) {
+ ret = PTR_ERR(ldo->regulator);
+ dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+ IRQF_TRIGGER_RISING, ldo->name,
+ ldo);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(ldo->regulator);
+err:
+ kfree(ldo);
+ return ret;
+}
+
+static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
+{
+ struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = ldo->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+ regulator_unregister(ldo->regulator);
+ kfree(ldo);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_aldo_driver = {
+ .probe = wm831x_aldo_probe,
+ .remove = __devexit_p(wm831x_aldo_remove),
+ .driver = {
+ .name = "wm831x-aldo",
+ },
+};
+
+/*
+ * Alive LDO
+ */
+
+#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
+
+static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ /* 0.8-1.55V in 50mV steps */
+ if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR)
+ return 800000 + (selector * 50000);
+ return -EINVAL;
+}
+
+static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
+ int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int vsel, ret;
+
+ vsel = (min_uV - 800000) / 50000;
+
+ ret = wm831x_alive_ldo_list_voltage(rdev, vsel);
+ if (ret < 0)
+ return ret;
+ if (ret < min_uV || ret > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+
+ return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
+
+ return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_LDO11_ON_VSEL_MASK;
+
+ return wm831x_alive_ldo_list_voltage(rdev, ret);
+}
+
+static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int ret;
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+ if (ret < 0)
+ return ret;
+ if (ret & mask)
+ return REGULATOR_STATUS_ON;
+ else
+ return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_alive_ldo_ops = {
+ .list_voltage = wm831x_alive_ldo_list_voltage,
+ .get_voltage = wm831x_alive_ldo_get_voltage,
+ .set_voltage = wm831x_alive_ldo_set_voltage,
+ .set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
+ .get_status = wm831x_alive_ldo_get_status,
+
+ .is_enabled = wm831x_ldo_is_enabled,
+ .enable = wm831x_ldo_enable,
+ .disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+ struct wm831x_ldo *ldo;
+ struct resource *res;
+ int ret;
+
+ dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+ if (pdata->ldo[id] == NULL)
+ return -ENODEV;
+
+ ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+ if (ldo == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ ldo->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ldo->base = res->start;
+
+ snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+ ldo->desc.name = ldo->name;
+ ldo->desc.id = id;
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1;
+ ldo->desc.ops = &wm831x_alive_ldo_ops;
+ ldo->desc.owner = THIS_MODULE;
+
+ ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+ pdata->ldo[id], ldo);
+ if (IS_ERR(ldo->regulator)) {
+ ret = PTR_ERR(ldo->regulator);
+ dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+
+err:
+ kfree(ldo);
+ return ret;
+}
+
+static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev)
+{
+ struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+
+ regulator_unregister(ldo->regulator);
+ kfree(ldo);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_alive_ldo_driver = {
+ .probe = wm831x_alive_ldo_probe,
+ .remove = __devexit_p(wm831x_alive_ldo_remove),
+ .driver = {
+ .name = "wm831x-alive-ldo",
+ },
+};
+
+static int __init wm831x_ldo_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&wm831x_gp_ldo_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x GP LDO driver: %d\n", ret);
+
+ ret = platform_driver_register(&wm831x_aldo_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x ALDO driver: %d\n", ret);
+
+ ret = platform_driver_register(&wm831x_alive_ldo_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x alive LDO driver: %d\n",
+ ret);
+
+ return 0;
+}
+subsys_initcall(wm831x_ldo_init);
+
+static void __exit wm831x_ldo_exit(void)
+{
+ platform_driver_unregister(&wm831x_alive_ldo_driver);
+ platform_driver_unregister(&wm831x_aldo_driver);
+ platform_driver_unregister(&wm831x_gp_ldo_driver);
+}
+module_exit(wm831x_ldo_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x LDO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-ldo");
+MODULE_ALIAS("platform:wm831x-aldo");
+MODULE_ALIAS("platform:wm831x-aliveldo");
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
index c74d6aa..f954663 100644
--- a/include/linux/mfd/wm831x/regulator.h
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -567,6 +567,588 @@
#define WM831X_DC4_SLPENA_WIDTH 1 /* DC4_SLPENA */
/*
+ * R16488 (0x4068) - LDO1 Control
+ */
+#define WM831X_LDO1_ERR_ACT_MASK 0xC000 /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_SHIFT 14 /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_WIDTH 2 /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_HWC_SRC_MASK 0x1800 /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_SHIFT 11 /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_WIDTH 2 /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_VSEL 0x0400 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_MASK 0x0400 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_SHIFT 10 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_WIDTH 1 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_MODE_MASK 0x0300 /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_SHIFT 8 /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_WIDTH 2 /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_FLT 0x0080 /* LDO1_FLT */
+#define WM831X_LDO1_FLT_MASK 0x0080 /* LDO1_FLT */
+#define WM831X_LDO1_FLT_SHIFT 7 /* LDO1_FLT */
+#define WM831X_LDO1_FLT_WIDTH 1 /* LDO1_FLT */
+#define WM831X_LDO1_SWI 0x0040 /* LDO1_SWI */
+#define WM831X_LDO1_SWI_MASK 0x0040 /* LDO1_SWI */
+#define WM831X_LDO1_SWI_SHIFT 6 /* LDO1_SWI */
+#define WM831X_LDO1_SWI_WIDTH 1 /* LDO1_SWI */
+#define WM831X_LDO1_LP_MODE 0x0001 /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_MASK 0x0001 /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_SHIFT 0 /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_WIDTH 1 /* LDO1_LP_MODE */
+
+/*
+ * R16489 (0x4069) - LDO1 ON Control
+ */
+#define WM831X_LDO1_ON_SLOT_MASK 0xE000 /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_SHIFT 13 /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_WIDTH 3 /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_MODE 0x0100 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_MASK 0x0100 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_SHIFT 8 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_WIDTH 1 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_VSEL_MASK 0x001F /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_SHIFT 0 /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_WIDTH 5 /* LDO1_ON_VSEL - [4:0] */
+
+/*
+ * R16490 (0x406A) - LDO1 SLEEP Control
+ */
+#define WM831X_LDO1_SLP_SLOT_MASK 0xE000 /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_SHIFT 13 /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_WIDTH 3 /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_MODE 0x0100 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_MASK 0x0100 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_SHIFT 8 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_WIDTH 1 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_VSEL_MASK 0x001F /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_SHIFT 0 /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_WIDTH 5 /* LDO1_SLP_VSEL - [4:0] */
+
+/*
+ * R16491 (0x406B) - LDO2 Control
+ */
+#define WM831X_LDO2_ERR_ACT_MASK 0xC000 /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_SHIFT 14 /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_WIDTH 2 /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_HWC_SRC_MASK 0x1800 /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_SHIFT 11 /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_WIDTH 2 /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_VSEL 0x0400 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_MASK 0x0400 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_SHIFT 10 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_WIDTH 1 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_MODE_MASK 0x0300 /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_SHIFT 8 /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_WIDTH 2 /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_FLT 0x0080 /* LDO2_FLT */
+#define WM831X_LDO2_FLT_MASK 0x0080 /* LDO2_FLT */
+#define WM831X_LDO2_FLT_SHIFT 7 /* LDO2_FLT */
+#define WM831X_LDO2_FLT_WIDTH 1 /* LDO2_FLT */
+#define WM831X_LDO2_SWI 0x0040 /* LDO2_SWI */
+#define WM831X_LDO2_SWI_MASK 0x0040 /* LDO2_SWI */
+#define WM831X_LDO2_SWI_SHIFT 6 /* LDO2_SWI */
+#define WM831X_LDO2_SWI_WIDTH 1 /* LDO2_SWI */
+#define WM831X_LDO2_LP_MODE 0x0001 /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_MASK 0x0001 /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_SHIFT 0 /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_WIDTH 1 /* LDO2_LP_MODE */
+
+/*
+ * R16492 (0x406C) - LDO2 ON Control
+ */
+#define WM831X_LDO2_ON_SLOT_MASK 0xE000 /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_SHIFT 13 /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_WIDTH 3 /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_MODE 0x0100 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_MASK 0x0100 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_SHIFT 8 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_WIDTH 1 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_VSEL_MASK 0x001F /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_SHIFT 0 /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_WIDTH 5 /* LDO2_ON_VSEL - [4:0] */
+
+/*
+ * R16493 (0x406D) - LDO2 SLEEP Control
+ */
+#define WM831X_LDO2_SLP_SLOT_MASK 0xE000 /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_SHIFT 13 /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_WIDTH 3 /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_MODE 0x0100 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_MASK 0x0100 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_SHIFT 8 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_WIDTH 1 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_VSEL_MASK 0x001F /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_SHIFT 0 /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_WIDTH 5 /* LDO2_SLP_VSEL - [4:0] */
+
+/*
+ * R16494 (0x406E) - LDO3 Control
+ */
+#define WM831X_LDO3_ERR_ACT_MASK 0xC000 /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_SHIFT 14 /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_WIDTH 2 /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_HWC_SRC_MASK 0x1800 /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_SHIFT 11 /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_WIDTH 2 /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_VSEL 0x0400 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_MASK 0x0400 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_SHIFT 10 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_WIDTH 1 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_MODE_MASK 0x0300 /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_SHIFT 8 /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_WIDTH 2 /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_FLT 0x0080 /* LDO3_FLT */
+#define WM831X_LDO3_FLT_MASK 0x0080 /* LDO3_FLT */
+#define WM831X_LDO3_FLT_SHIFT 7 /* LDO3_FLT */
+#define WM831X_LDO3_FLT_WIDTH 1 /* LDO3_FLT */
+#define WM831X_LDO3_SWI 0x0040 /* LDO3_SWI */
+#define WM831X_LDO3_SWI_MASK 0x0040 /* LDO3_SWI */
+#define WM831X_LDO3_SWI_SHIFT 6 /* LDO3_SWI */
+#define WM831X_LDO3_SWI_WIDTH 1 /* LDO3_SWI */
+#define WM831X_LDO3_LP_MODE 0x0001 /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_MASK 0x0001 /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_SHIFT 0 /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_WIDTH 1 /* LDO3_LP_MODE */
+
+/*
+ * R16495 (0x406F) - LDO3 ON Control
+ */
+#define WM831X_LDO3_ON_SLOT_MASK 0xE000 /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_SHIFT 13 /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_WIDTH 3 /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_MODE 0x0100 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_MASK 0x0100 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_SHIFT 8 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_WIDTH 1 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_VSEL_MASK 0x001F /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_SHIFT 0 /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_WIDTH 5 /* LDO3_ON_VSEL - [4:0] */
+
+/*
+ * R16496 (0x4070) - LDO3 SLEEP Control
+ */
+#define WM831X_LDO3_SLP_SLOT_MASK 0xE000 /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_SHIFT 13 /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_WIDTH 3 /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_MODE 0x0100 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_MASK 0x0100 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_SHIFT 8 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_WIDTH 1 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_VSEL_MASK 0x001F /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_SHIFT 0 /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_WIDTH 5 /* LDO3_SLP_VSEL - [4:0] */
+
+/*
+ * R16497 (0x4071) - LDO4 Control
+ */
+#define WM831X_LDO4_ERR_ACT_MASK 0xC000 /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_SHIFT 14 /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_WIDTH 2 /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_HWC_SRC_MASK 0x1800 /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_SHIFT 11 /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_WIDTH 2 /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_VSEL 0x0400 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_MASK 0x0400 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_SHIFT 10 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_WIDTH 1 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_MODE_MASK 0x0300 /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_SHIFT 8 /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_WIDTH 2 /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_FLT 0x0080 /* LDO4_FLT */
+#define WM831X_LDO4_FLT_MASK 0x0080 /* LDO4_FLT */
+#define WM831X_LDO4_FLT_SHIFT 7 /* LDO4_FLT */
+#define WM831X_LDO4_FLT_WIDTH 1 /* LDO4_FLT */
+#define WM831X_LDO4_SWI 0x0040 /* LDO4_SWI */
+#define WM831X_LDO4_SWI_MASK 0x0040 /* LDO4_SWI */
+#define WM831X_LDO4_SWI_SHIFT 6 /* LDO4_SWI */
+#define WM831X_LDO4_SWI_WIDTH 1 /* LDO4_SWI */
+#define WM831X_LDO4_LP_MODE 0x0001 /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_MASK 0x0001 /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_SHIFT 0 /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_WIDTH 1 /* LDO4_LP_MODE */
+
+/*
+ * R16498 (0x4072) - LDO4 ON Control
+ */
+#define WM831X_LDO4_ON_SLOT_MASK 0xE000 /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_SHIFT 13 /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_WIDTH 3 /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_MODE 0x0100 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_MASK 0x0100 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_SHIFT 8 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_WIDTH 1 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_VSEL_MASK 0x001F /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_SHIFT 0 /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_WIDTH 5 /* LDO4_ON_VSEL - [4:0] */
+
+/*
+ * R16499 (0x4073) - LDO4 SLEEP Control
+ */
+#define WM831X_LDO4_SLP_SLOT_MASK 0xE000 /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_SHIFT 13 /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_WIDTH 3 /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_MODE 0x0100 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_MASK 0x0100 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_SHIFT 8 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_WIDTH 1 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_VSEL_MASK 0x001F /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_SHIFT 0 /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_WIDTH 5 /* LDO4_SLP_VSEL - [4:0] */
+
+/*
+ * R16500 (0x4074) - LDO5 Control
+ */
+#define WM831X_LDO5_ERR_ACT_MASK 0xC000 /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_SHIFT 14 /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_WIDTH 2 /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_HWC_SRC_MASK 0x1800 /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_SHIFT 11 /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_WIDTH 2 /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_VSEL 0x0400 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_MASK 0x0400 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_SHIFT 10 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_WIDTH 1 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_MODE_MASK 0x0300 /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_SHIFT 8 /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_WIDTH 2 /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_FLT 0x0080 /* LDO5_FLT */
+#define WM831X_LDO5_FLT_MASK 0x0080 /* LDO5_FLT */
+#define WM831X_LDO5_FLT_SHIFT 7 /* LDO5_FLT */
+#define WM831X_LDO5_FLT_WIDTH 1 /* LDO5_FLT */
+#define WM831X_LDO5_SWI 0x0040 /* LDO5_SWI */
+#define WM831X_LDO5_SWI_MASK 0x0040 /* LDO5_SWI */
+#define WM831X_LDO5_SWI_SHIFT 6 /* LDO5_SWI */
+#define WM831X_LDO5_SWI_WIDTH 1 /* LDO5_SWI */
+#define WM831X_LDO5_LP_MODE 0x0001 /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_MASK 0x0001 /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_SHIFT 0 /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_WIDTH 1 /* LDO5_LP_MODE */
+
+/*
+ * R16501 (0x4075) - LDO5 ON Control
+ */
+#define WM831X_LDO5_ON_SLOT_MASK 0xE000 /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_SHIFT 13 /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_WIDTH 3 /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_MODE 0x0100 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_MASK 0x0100 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_SHIFT 8 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_WIDTH 1 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_VSEL_MASK 0x001F /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_SHIFT 0 /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_WIDTH 5 /* LDO5_ON_VSEL - [4:0] */
+
+/*
+ * R16502 (0x4076) - LDO5 SLEEP Control
+ */
+#define WM831X_LDO5_SLP_SLOT_MASK 0xE000 /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_SHIFT 13 /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_WIDTH 3 /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_MODE 0x0100 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_MASK 0x0100 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_SHIFT 8 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_WIDTH 1 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_VSEL_MASK 0x001F /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_SHIFT 0 /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_WIDTH 5 /* LDO5_SLP_VSEL - [4:0] */
+
+/*
+ * R16503 (0x4077) - LDO6 Control
+ */
+#define WM831X_LDO6_ERR_ACT_MASK 0xC000 /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_SHIFT 14 /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_WIDTH 2 /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_HWC_SRC_MASK 0x1800 /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_SHIFT 11 /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_WIDTH 2 /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_VSEL 0x0400 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_MASK 0x0400 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_SHIFT 10 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_WIDTH 1 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_MODE_MASK 0x0300 /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_SHIFT 8 /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_WIDTH 2 /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_FLT 0x0080 /* LDO6_FLT */
+#define WM831X_LDO6_FLT_MASK 0x0080 /* LDO6_FLT */
+#define WM831X_LDO6_FLT_SHIFT 7 /* LDO6_FLT */
+#define WM831X_LDO6_FLT_WIDTH 1 /* LDO6_FLT */
+#define WM831X_LDO6_SWI 0x0040 /* LDO6_SWI */
+#define WM831X_LDO6_SWI_MASK 0x0040 /* LDO6_SWI */
+#define WM831X_LDO6_SWI_SHIFT 6 /* LDO6_SWI */
+#define WM831X_LDO6_SWI_WIDTH 1 /* LDO6_SWI */
+#define WM831X_LDO6_LP_MODE 0x0001 /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_MASK 0x0001 /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_SHIFT 0 /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_WIDTH 1 /* LDO6_LP_MODE */
+
+/*
+ * R16504 (0x4078) - LDO6 ON Control
+ */
+#define WM831X_LDO6_ON_SLOT_MASK 0xE000 /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_SHIFT 13 /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_WIDTH 3 /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_MODE 0x0100 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_MASK 0x0100 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_SHIFT 8 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_WIDTH 1 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_VSEL_MASK 0x001F /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_SHIFT 0 /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_WIDTH 5 /* LDO6_ON_VSEL - [4:0] */
+
+/*
+ * R16505 (0x4079) - LDO6 SLEEP Control
+ */
+#define WM831X_LDO6_SLP_SLOT_MASK 0xE000 /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_SHIFT 13 /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_WIDTH 3 /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_MODE 0x0100 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_MASK 0x0100 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_SHIFT 8 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_WIDTH 1 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_VSEL_MASK 0x001F /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_SHIFT 0 /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_WIDTH 5 /* LDO6_SLP_VSEL - [4:0] */
+
+/*
+ * R16506 (0x407A) - LDO7 Control
+ */
+#define WM831X_LDO7_ERR_ACT_MASK 0xC000 /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_SHIFT 14 /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_WIDTH 2 /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_HWC_SRC_MASK 0x1800 /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_SHIFT 11 /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_WIDTH 2 /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_VSEL 0x0400 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_MASK 0x0400 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_SHIFT 10 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_WIDTH 1 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_MODE_MASK 0x0300 /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_SHIFT 8 /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_WIDTH 2 /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_FLT 0x0080 /* LDO7_FLT */
+#define WM831X_LDO7_FLT_MASK 0x0080 /* LDO7_FLT */
+#define WM831X_LDO7_FLT_SHIFT 7 /* LDO7_FLT */
+#define WM831X_LDO7_FLT_WIDTH 1 /* LDO7_FLT */
+#define WM831X_LDO7_SWI 0x0040 /* LDO7_SWI */
+#define WM831X_LDO7_SWI_MASK 0x0040 /* LDO7_SWI */
+#define WM831X_LDO7_SWI_SHIFT 6 /* LDO7_SWI */
+#define WM831X_LDO7_SWI_WIDTH 1 /* LDO7_SWI */
+
+/*
+ * R16507 (0x407B) - LDO7 ON Control
+ */
+#define WM831X_LDO7_ON_SLOT_MASK 0xE000 /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_SHIFT 13 /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_WIDTH 3 /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_MODE 0x0100 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_MASK 0x0100 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_SHIFT 8 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_WIDTH 1 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_VSEL_MASK 0x001F /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_SHIFT 0 /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_WIDTH 5 /* LDO7_ON_VSEL - [4:0] */
+
+/*
+ * R16508 (0x407C) - LDO7 SLEEP Control
+ */
+#define WM831X_LDO7_SLP_SLOT_MASK 0xE000 /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_SHIFT 13 /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_WIDTH 3 /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_MODE 0x0100 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_MASK 0x0100 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_SHIFT 8 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_WIDTH 1 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_VSEL_MASK 0x001F /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_SHIFT 0 /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_WIDTH 5 /* LDO7_SLP_VSEL - [4:0] */
+
+/*
+ * R16509 (0x407D) - LDO8 Control
+ */
+#define WM831X_LDO8_ERR_ACT_MASK 0xC000 /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_SHIFT 14 /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_WIDTH 2 /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_HWC_SRC_MASK 0x1800 /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_SHIFT 11 /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_WIDTH 2 /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_VSEL 0x0400 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_MASK 0x0400 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_SHIFT 10 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_WIDTH 1 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_MODE_MASK 0x0300 /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_SHIFT 8 /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_WIDTH 2 /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_FLT 0x0080 /* LDO8_FLT */
+#define WM831X_LDO8_FLT_MASK 0x0080 /* LDO8_FLT */
+#define WM831X_LDO8_FLT_SHIFT 7 /* LDO8_FLT */
+#define WM831X_LDO8_FLT_WIDTH 1 /* LDO8_FLT */
+#define WM831X_LDO8_SWI 0x0040 /* LDO8_SWI */
+#define WM831X_LDO8_SWI_MASK 0x0040 /* LDO8_SWI */
+#define WM831X_LDO8_SWI_SHIFT 6 /* LDO8_SWI */
+#define WM831X_LDO8_SWI_WIDTH 1 /* LDO8_SWI */
+
+/*
+ * R16510 (0x407E) - LDO8 ON Control
+ */
+#define WM831X_LDO8_ON_SLOT_MASK 0xE000 /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_SHIFT 13 /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_WIDTH 3 /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_MODE 0x0100 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_MASK 0x0100 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_SHIFT 8 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_WIDTH 1 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_VSEL_MASK 0x001F /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_SHIFT 0 /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_WIDTH 5 /* LDO8_ON_VSEL - [4:0] */
+
+/*
+ * R16511 (0x407F) - LDO8 SLEEP Control
+ */
+#define WM831X_LDO8_SLP_SLOT_MASK 0xE000 /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_SHIFT 13 /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_WIDTH 3 /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_MODE 0x0100 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_MASK 0x0100 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_SHIFT 8 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_WIDTH 1 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_VSEL_MASK 0x001F /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_SHIFT 0 /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_WIDTH 5 /* LDO8_SLP_VSEL - [4:0] */
+
+/*
+ * R16512 (0x4080) - LDO9 Control
+ */
+#define WM831X_LDO9_ERR_ACT_MASK 0xC000 /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_SHIFT 14 /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_WIDTH 2 /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_HWC_SRC_MASK 0x1800 /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_SHIFT 11 /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_WIDTH 2 /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_VSEL 0x0400 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_MASK 0x0400 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_SHIFT 10 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_WIDTH 1 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_MODE_MASK 0x0300 /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_SHIFT 8 /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_WIDTH 2 /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_FLT 0x0080 /* LDO9_FLT */
+#define WM831X_LDO9_FLT_MASK 0x0080 /* LDO9_FLT */
+#define WM831X_LDO9_FLT_SHIFT 7 /* LDO9_FLT */
+#define WM831X_LDO9_FLT_WIDTH 1 /* LDO9_FLT */
+#define WM831X_LDO9_SWI 0x0040 /* LDO9_SWI */
+#define WM831X_LDO9_SWI_MASK 0x0040 /* LDO9_SWI */
+#define WM831X_LDO9_SWI_SHIFT 6 /* LDO9_SWI */
+#define WM831X_LDO9_SWI_WIDTH 1 /* LDO9_SWI */
+
+/*
+ * R16513 (0x4081) - LDO9 ON Control
+ */
+#define WM831X_LDO9_ON_SLOT_MASK 0xE000 /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_SHIFT 13 /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_WIDTH 3 /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_MODE 0x0100 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_MASK 0x0100 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_SHIFT 8 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_WIDTH 1 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_VSEL_MASK 0x001F /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_SHIFT 0 /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_WIDTH 5 /* LDO9_ON_VSEL - [4:0] */
+
+/*
+ * R16514 (0x4082) - LDO9 SLEEP Control
+ */
+#define WM831X_LDO9_SLP_SLOT_MASK 0xE000 /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_SHIFT 13 /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_WIDTH 3 /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_MODE 0x0100 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_MASK 0x0100 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_SHIFT 8 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_WIDTH 1 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_VSEL_MASK 0x001F /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_SHIFT 0 /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_WIDTH 5 /* LDO9_SLP_VSEL - [4:0] */
+
+/*
+ * R16515 (0x4083) - LDO10 Control
+ */
+#define WM831X_LDO10_ERR_ACT_MASK 0xC000 /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_SHIFT 14 /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_WIDTH 2 /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_HWC_SRC_MASK 0x1800 /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_SHIFT 11 /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_WIDTH 2 /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_VSEL 0x0400 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_MASK 0x0400 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_SHIFT 10 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_WIDTH 1 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_MODE_MASK 0x0300 /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_SHIFT 8 /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_WIDTH 2 /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_FLT 0x0080 /* LDO10_FLT */
+#define WM831X_LDO10_FLT_MASK 0x0080 /* LDO10_FLT */
+#define WM831X_LDO10_FLT_SHIFT 7 /* LDO10_FLT */
+#define WM831X_LDO10_FLT_WIDTH 1 /* LDO10_FLT */
+#define WM831X_LDO10_SWI 0x0040 /* LDO10_SWI */
+#define WM831X_LDO10_SWI_MASK 0x0040 /* LDO10_SWI */
+#define WM831X_LDO10_SWI_SHIFT 6 /* LDO10_SWI */
+#define WM831X_LDO10_SWI_WIDTH 1 /* LDO10_SWI */
+
+/*
+ * R16516 (0x4084) - LDO10 ON Control
+ */
+#define WM831X_LDO10_ON_SLOT_MASK 0xE000 /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_SHIFT 13 /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_WIDTH 3 /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_MODE 0x0100 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_MASK 0x0100 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_SHIFT 8 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_WIDTH 1 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_VSEL_MASK 0x001F /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_SHIFT 0 /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_WIDTH 5 /* LDO10_ON_VSEL - [4:0] */
+
+/*
+ * R16517 (0x4085) - LDO10 SLEEP Control
+ */
+#define WM831X_LDO10_SLP_SLOT_MASK 0xE000 /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_SHIFT 13 /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_WIDTH 3 /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_MODE 0x0100 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_MASK 0x0100 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_SHIFT 8 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_WIDTH 1 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_VSEL_MASK 0x001F /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_SHIFT 0 /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_WIDTH 5 /* LDO10_SLP_VSEL - [4:0] */
+
+/*
+ * R16519 (0x4087) - LDO11 ON Control
+ */
+#define WM831X_LDO11_ON_SLOT_MASK 0xE000 /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_SHIFT 13 /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_WIDTH 3 /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_OFFENA 0x1000 /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_MASK 0x1000 /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_SHIFT 12 /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_WIDTH 1 /* LDO11_OFFENA */
+#define WM831X_LDO11_VSEL_SRC 0x0080 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_MASK 0x0080 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_SHIFT 7 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_WIDTH 1 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_ON_VSEL_MASK 0x000F /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_SHIFT 0 /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_WIDTH 4 /* LDO11_ON_VSEL - [3:0] */
+
+/*
+ * R16520 (0x4088) - LDO11 SLEEP Control
+ */
+#define WM831X_LDO11_SLP_SLOT_MASK 0xE000 /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_SHIFT 13 /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_WIDTH 3 /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_VSEL_MASK 0x000F /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_SHIFT 0 /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_WIDTH 4 /* LDO11_SLP_VSEL - [3:0] */
+
+/*
* R16526 (0x408E) - Power Good Source 1
*/
#define WM831X_DC4_OK 0x0008 /* DC4_OK */
@@ -586,6 +1168,50 @@
#define WM831X_DC1_OK_SHIFT 0 /* DC1_OK */
#define WM831X_DC1_OK_WIDTH 1 /* DC1_OK */
+/*
+ * R16527 (0x408F) - Power Good Source 2
+ */
+#define WM831X_LDO10_OK 0x0200 /* LDO10_OK */
+#define WM831X_LDO10_OK_MASK 0x0200 /* LDO10_OK */
+#define WM831X_LDO10_OK_SHIFT 9 /* LDO10_OK */
+#define WM831X_LDO10_OK_WIDTH 1 /* LDO10_OK */
+#define WM831X_LDO9_OK 0x0100 /* LDO9_OK */
+#define WM831X_LDO9_OK_MASK 0x0100 /* LDO9_OK */
+#define WM831X_LDO9_OK_SHIFT 8 /* LDO9_OK */
+#define WM831X_LDO9_OK_WIDTH 1 /* LDO9_OK */
+#define WM831X_LDO8_OK 0x0080 /* LDO8_OK */
+#define WM831X_LDO8_OK_MASK 0x0080 /* LDO8_OK */
+#define WM831X_LDO8_OK_SHIFT 7 /* LDO8_OK */
+#define WM831X_LDO8_OK_WIDTH 1 /* LDO8_OK */
+#define WM831X_LDO7_OK 0x0040 /* LDO7_OK */
+#define WM831X_LDO7_OK_MASK 0x0040 /* LDO7_OK */
+#define WM831X_LDO7_OK_SHIFT 6 /* LDO7_OK */
+#define WM831X_LDO7_OK_WIDTH 1 /* LDO7_OK */
+#define WM831X_LDO6_OK 0x0020 /* LDO6_OK */
+#define WM831X_LDO6_OK_MASK 0x0020 /* LDO6_OK */
+#define WM831X_LDO6_OK_SHIFT 5 /* LDO6_OK */
+#define WM831X_LDO6_OK_WIDTH 1 /* LDO6_OK */
+#define WM831X_LDO5_OK 0x0010 /* LDO5_OK */
+#define WM831X_LDO5_OK_MASK 0x0010 /* LDO5_OK */
+#define WM831X_LDO5_OK_SHIFT 4 /* LDO5_OK */
+#define WM831X_LDO5_OK_WIDTH 1 /* LDO5_OK */
+#define WM831X_LDO4_OK 0x0008 /* LDO4_OK */
+#define WM831X_LDO4_OK_MASK 0x0008 /* LDO4_OK */
+#define WM831X_LDO4_OK_SHIFT 3 /* LDO4_OK */
+#define WM831X_LDO4_OK_WIDTH 1 /* LDO4_OK */
+#define WM831X_LDO3_OK 0x0004 /* LDO3_OK */
+#define WM831X_LDO3_OK_MASK 0x0004 /* LDO3_OK */
+#define WM831X_LDO3_OK_SHIFT 2 /* LDO3_OK */
+#define WM831X_LDO3_OK_WIDTH 1 /* LDO3_OK */
+#define WM831X_LDO2_OK 0x0002 /* LDO2_OK */
+#define WM831X_LDO2_OK_MASK 0x0002 /* LDO2_OK */
+#define WM831X_LDO2_OK_SHIFT 1 /* LDO2_OK */
+#define WM831X_LDO2_OK_WIDTH 1 /* LDO2_OK */
+#define WM831X_LDO1_OK 0x0001 /* LDO1_OK */
+#define WM831X_LDO1_OK_MASK 0x0001 /* LDO1_OK */
+#define WM831X_LDO1_OK_SHIFT 0 /* LDO1_OK */
+#define WM831X_LDO1_OK_WIDTH 1 /* LDO1_OK */
+
#define WM831X_ISINK_MAX_ISEL 56
extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 18/22] regulator: Add WM831x EPE support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (16 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 17/22] regulator: Add WM831x LDO support Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-28 14:22 ` [PATCH 19/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support Mark Brown
` (4 subsequent siblings)
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of PMICs provide two optional outputs for
controlling external devices during power sequencing, for example
an external regulator. While in essence these are GPIOs the
hardware presents them as DCDCs with very little control so
provide support via the regulator API in that fashion.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
drivers/regulator/wm831x-dcdc.c | 88 +++++++++++++++++++++++++++++++++++++++
1 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 97a7877..97ae40f 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -613,6 +613,89 @@ static struct platform_driver wm831x_buckp_driver = {
},
};
+/*
+ * External Power Enable
+ *
+ * These aren't actually DCDCs but look like them in hardware so share
+ * code.
+ */
+
+#define WM831X_EPE_BASE 6
+
+static struct regulator_ops wm831x_epe_ops = {
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+ .get_status = wm831x_dcdc_get_status,
+};
+
+static __devinit int wm831x_epe_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->epe);
+ struct wm831x_dcdc *dcdc;
+ int ret;
+
+ dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
+
+ if (pdata->epe[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ /* For current parts this is correct; probably need to revisit
+ * in future.
+ */
+ snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
+ dcdc->desc.ops = &wm831x_epe_ops;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->epe[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_epe_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_epe_driver = {
+ .probe = wm831x_epe_probe,
+ .remove = __devexit_p(wm831x_epe_remove),
+ .driver = {
+ .name = "wm831x-epe",
+ },
+};
+
static int __init wm831x_dcdc_init(void)
{
int ret;
@@ -624,12 +707,17 @@ static int __init wm831x_dcdc_init(void)
if (ret != 0)
pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+ ret = platform_driver_register(&wm831x_epe_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x EPE driver: %d\n", ret);
+
return 0;
}
subsys_initcall(wm831x_dcdc_init);
static void __exit wm831x_dcdc_exit(void)
{
+ platform_driver_unregister(&wm831x_epe_driver);
platform_driver_unregister(&wm831x_buckp_driver);
platform_driver_unregister(&wm831x_buckv_driver);
}
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (17 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 18/22] regulator: Add WM831x EPE support Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 20/22] regulator: Add WM831x ISINK support Mark Brown
` (3 subsequent siblings)
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of PMICs include a single DC-DC boost convertor.
This adds basic support for this convertor.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
drivers/regulator/wm831x-dcdc.c | 131 +++++++++++++++++++++++++++++++++++++++
1 files changed, 131 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 97ae40f..3251e22 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -614,6 +614,132 @@ static struct platform_driver wm831x_buckp_driver = {
};
/*
+ * DCDC boost convertors
+ */
+
+static int wm831x_boostp_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int ret;
+
+ /* First, check for errors */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & (1 << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+ if (ret < 0)
+ return ret;
+ if (ret & (1 << rdev_get_id(rdev)))
+ return REGULATOR_STATUS_ON;
+ else
+ return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_boostp_ops = {
+ .get_status = wm831x_boostp_get_status,
+
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+};
+
+static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+ struct wm831x_dcdc *dcdc;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+ if (pdata->dcdc[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ dcdc->base = res->start;
+
+ snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.ops = &wm831x_boostp_ops;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->dcdc[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(dcdc->regulator);
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_boostp_driver = {
+ .probe = wm831x_boostp_probe,
+ .remove = __devexit_p(wm831x_boostp_remove),
+ .driver = {
+ .name = "wm831x-boostp",
+ },
+};
+
+/*
* External Power Enable
*
* These aren't actually DCDCs but look like them in hardware so share
@@ -707,6 +833,10 @@ static int __init wm831x_dcdc_init(void)
if (ret != 0)
pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+ ret = platform_driver_register(&wm831x_boostp_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x BOOST driver: %d\n", ret);
+
ret = platform_driver_register(&wm831x_epe_driver);
if (ret != 0)
pr_err("Failed to register WM831x EPE driver: %d\n", ret);
@@ -718,6 +848,7 @@ subsys_initcall(wm831x_dcdc_init);
static void __exit wm831x_dcdc_exit(void)
{
platform_driver_unregister(&wm831x_epe_driver);
+ platform_driver_unregister(&wm831x_boostp_driver);
platform_driver_unregister(&wm831x_buckp_driver);
platform_driver_unregister(&wm831x_buckv_driver);
}
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 20/22] regulator: Add WM831x ISINK support
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (18 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices Mark Brown
` (2 subsequent siblings)
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of PMICs provide two constant current sinks
designed to drive strings of serially connected LEDs for applications
such as backlights. This driver adds support for those regulators.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
drivers/regulator/Makefile | 1 +
drivers/regulator/wm831x-isink.c | 260 ++++++++++++++++++++++++++++++++++++++
2 files changed, 261 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/wm831x-isink.c
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index a0a635f..3a4cdf5 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
new file mode 100644
index 0000000..64c407d
--- /dev/null
+++ b/drivers/regulator/wm831x-isink.c
@@ -0,0 +1,260 @@
+/*
+ * wm831x-isink.c -- Current sink driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_ISINK_MAX_NAME 7
+
+struct wm831x_isink {
+ char name[WM831X_ISINK_MAX_NAME];
+ struct regulator_desc desc;
+ int reg;
+ struct wm831x *wm831x;
+ struct regulator_dev *regulator;
+};
+
+static int wm831x_isink_enable(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ /* We have a two stage enable: first start the ISINK... */
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA,
+ WM831X_CS1_ENA);
+ if (ret != 0)
+ return ret;
+
+ /* ...then enable drive */
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE,
+ WM831X_CS1_DRIVE);
+ if (ret != 0)
+ wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+
+ return ret;
+
+}
+
+static int wm831x_isink_disable(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+
+}
+
+static int wm831x_isink_is_enabled(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, isink->reg);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) ==
+ (WM831X_CS1_ENA | WM831X_CS1_DRIVE))
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_isink_set_current(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) {
+ int val = wm831x_isinkv_values[i];
+ if (min_uA >= val && val <= max_uA) {
+ ret = wm831x_set_bits(wm831x, isink->reg,
+ WM831X_CS1_ISEL_MASK, i);
+ return ret;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int wm831x_isink_get_current(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, isink->reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_CS1_ISEL_MASK;
+ if (ret > WM831X_ISINK_MAX_ISEL)
+ ret = WM831X_ISINK_MAX_ISEL;
+
+ return wm831x_isinkv_values[ret];
+}
+
+static struct regulator_ops wm831x_isink_ops = {
+ .is_enabled = wm831x_isink_is_enabled,
+ .enable = wm831x_isink_enable,
+ .disable = wm831x_isink_disable,
+ .set_current_limit = wm831x_isink_set_current,
+ .get_current_limit = wm831x_isink_get_current,
+};
+
+static irqreturn_t wm831x_isink_irq(int irq, void *data)
+{
+ struct wm831x_isink *isink = data;
+
+ regulator_notifier_call_chain(isink->regulator,
+ REGULATOR_EVENT_OVER_CURRENT,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+
+static __devinit int wm831x_isink_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ struct wm831x_isink *isink;
+ int id = pdev->id % ARRAY_SIZE(pdata->isink);
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1);
+
+ if (pdata->isink[id] == NULL)
+ return -ENODEV;
+
+ isink = kzalloc(sizeof(struct wm831x_isink), GFP_KERNEL);
+ if (isink == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ isink->reg = res->start;
+
+ /* For current parts this is correct; probably need to revisit
+ * in future.
+ */
+ snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1);
+ isink->desc.name = isink->name;
+ isink->desc.id = id;
+ isink->desc.ops = &wm831x_isink_ops;
+ isink->desc.type = REGULATOR_CURRENT;
+ isink->desc.owner = THIS_MODULE;
+
+ isink->regulator = regulator_register(&isink->desc, &pdev->dev,
+ pdata->isink[id], isink);
+ if (IS_ERR(isink->regulator)) {
+ ret = PTR_ERR(isink->regulator);
+ dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq,
+ IRQF_TRIGGER_RISING, isink->name,
+ isink);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, isink);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(isink->regulator);
+err:
+ kfree(isink);
+ return ret;
+}
+
+static __devexit int wm831x_isink_remove(struct platform_device *pdev)
+{
+ struct wm831x_isink *isink = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = isink->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink);
+
+ regulator_unregister(isink->regulator);
+ kfree(isink);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_isink_driver = {
+ .probe = wm831x_isink_probe,
+ .remove = __devexit_p(wm831x_isink_remove),
+ .driver = {
+ .name = "wm831x-isink",
+ },
+};
+
+static int __init wm831x_isink_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&wm831x_isink_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x ISINK driver: %d\n", ret);
+
+ return ret;
+}
+subsys_initcall(wm831x_isink_init);
+
+static void __exit wm831x_isink_exit(void)
+{
+ platform_driver_unregister(&wm831x_isink_driver);
+}
+module_exit(wm831x_isink_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x current sink driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-isink");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (19 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 20/22] regulator: Add WM831x ISINK support Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-07-28 14:18 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 22/22] [WATCHDOG] Add support for WM831x watchdog Mark Brown
2009-08-04 11:35 ` [PATCH 0/22] WM831x drivers Samuel Ortiz
22 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Alessandro Zummo, rtc-linux
The WM831x series of PMICs contain RTC functionality. The hardware
provides a 32 bit counter incrementing at 1Hz together with a per
tick interrupt and an alarm value. For simplicity the driver chooses
to define the epoch for the counter as the Unix epoch - if required
platform data can be used in future to customise this.
When powered on from a completely cold state the RTC reports that it
has not been configured - when this happens an error is returned
when attempting to read the RTC in order to avoid use of values we
know to be invalid.
The hardware also provides security features which mean that it can
ignore attempts to set the RTC time in certain circumstances, most
notably if the RTC is written to too often. These errors are detected
by verifying the written RTC value.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
---
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-wm831x.c | 538 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 549 insertions(+), 0 deletions(-)
create mode 100644 drivers/rtc/rtc-wm831x.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 139b783..f595113 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -537,6 +537,16 @@ config RTC_DRV_V3020
This driver can also be built as a module. If so, the module
will be called rtc-v3020.
+config RTC_DRV_WM831X
+ tristate "Wolfson Microelectronics WM831x RTC"
+ depends on MFD_WM831X
+ help
+ If you say yes here you will get support for the RTC subsystem
+ of the Wolfson Microelectronics WM831X series PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-wm831x".
+
config RTC_DRV_WM8350
tristate "Wolfson Microelectronics WM8350 RTC"
depends on MFD_WM8350
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2a565f8..61d5600 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o
obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o
obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c
new file mode 100644
index 0000000..50ab440
--- /dev/null
+++ b/drivers/rtc/rtc-wm831x.c
@@ -0,0 +1,538 @@
+/*
+ * Real Time Clock driver for Wolfson Microelectronics WM831x
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+
+/*
+ * R16416 (0x4020) - RTC Write Counter
+ */
+#define WM831X_RTC_WR_CNT_MASK 0xFFFF /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_SHIFT 0 /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_WIDTH 16 /* RTC_WR_CNT - [15:0] */
+
+/*
+ * R16417 (0x4021) - RTC Time 1
+ */
+#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */
+
+/*
+ * R16418 (0x4022) - RTC Time 2
+ */
+#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */
+
+/*
+ * R16419 (0x4023) - RTC Alarm 1
+ */
+#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */
+
+/*
+ * R16420 (0x4024) - RTC Alarm 2
+ */
+#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */
+
+/*
+ * R16421 (0x4025) - RTC Control
+ */
+#define WM831X_RTC_VALID 0x8000 /* RTC_VALID */
+#define WM831X_RTC_VALID_MASK 0x8000 /* RTC_VALID */
+#define WM831X_RTC_VALID_SHIFT 15 /* RTC_VALID */
+#define WM831X_RTC_VALID_WIDTH 1 /* RTC_VALID */
+#define WM831X_RTC_SYNC_BUSY 0x4000 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_MASK 0x4000 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_SHIFT 14 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_WIDTH 1 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_ALM_ENA 0x0400 /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_MASK 0x0400 /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_SHIFT 10 /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_WIDTH 1 /* RTC_ALM_ENA */
+#define WM831X_RTC_PINT_FREQ_MASK 0x0070 /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_SHIFT 4 /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_WIDTH 3 /* RTC_PINT_FREQ - [6:4] */
+
+/*
+ * R16422 (0x4026) - RTC Trim
+ */
+#define WM831X_RTC_TRIM_MASK 0x03FF /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_SHIFT 0 /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_WIDTH 10 /* RTC_TRIM - [9:0] */
+
+#define WM831X_SET_TIME_RETRIES 5
+#define WM831X_GET_TIME_RETRIES 5
+
+struct wm831x_rtc {
+ struct wm831x *wm831x;
+ struct rtc_device *rtc;
+ int alarm_enabled;
+ int per_irq;
+};
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ struct wm831x *wm831x = wm831x_rtc->wm831x;
+ u16 time1[2], time2[2];
+ int ret;
+ int count = 0;
+
+ /* Has the RTC been programmed? */
+ ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read RTC control: %d\n", ret);
+ return ret;
+ }
+ if (!(ret & WM831X_RTC_VALID)) {
+ dev_dbg(dev, "RTC not yet configured\n");
+ return -EINVAL;
+ }
+
+ /* Read twice to make sure we don't read a corrupt, partially
+ * incremented, value.
+ */
+ do {
+ ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+ 2, time1);
+ if (ret != 0)
+ continue;
+
+ ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+ 2, time2);
+ if (ret != 0)
+ continue;
+
+ if (memcmp(time1, time2, sizeof(time1)) == 0) {
+ u32 time = (time1[0] << 16) | time1[1];
+
+ rtc_time_to_tm(time, tm);
+ return 0;
+ }
+
+ } while (++count < WM831X_GET_TIME_RETRIES);
+
+ dev_err(dev, "Timed out reading current time\n");
+
+ return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm831x_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ struct wm831x *wm831x = wm831x_rtc->wm831x;
+ struct rtc_time new_tm;
+ unsigned long time, new_time;
+ int ret;
+ int count = 0;
+
+ ret = rtc_tm_to_time(tm, &time);
+ if (ret < 0) {
+ dev_err(dev, "Failed to convert time: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1,
+ (time >> 16) & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write TIME_1: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write TIME_2: %d\n", ret);
+ return ret;
+ }
+
+ /* Wait for the update to complete - should happen first time
+ * round but be conservative.
+ */
+ do {
+ msleep(1);
+
+ ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0)
+ ret = WM831X_RTC_SYNC_BUSY;
+ } while (!(ret & WM831X_RTC_SYNC_BUSY) &&
+ ++count < WM831X_SET_TIME_RETRIES);
+
+ if (ret & WM831X_RTC_SYNC_BUSY) {
+ dev_err(dev, "Timed out writing RTC update\n");
+ return -EIO;
+ }
+
+ /* Check that the update was accepted; security features may
+ * have caused the update to be ignored.
+ */
+ ret = wm831x_rtc_readtime(dev, &new_tm);
+ if (ret < 0)
+ return ret;
+
+ ret = rtc_tm_to_time(&new_tm, &new_time);
+ if (ret < 0) {
+ dev_err(dev, "Failed to convert time: %d\n", ret);
+ return ret;
+ }
+
+ /* Allow a second of change in case of tick */
+ if (new_time - time > 1) {
+ dev_err(dev, "RTC update not permitted by hardware\n");
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ int ret;
+ u16 data[2];
+ u32 time;
+
+ ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1,
+ 2, data);
+ if (ret != 0) {
+ dev_err(dev, "Failed to read alarm time: %d\n", ret);
+ return ret;
+ }
+
+ time = (data[0] << 16) | data[1];
+
+ rtc_time_to_tm(time, &alrm->time);
+
+ ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read RTC control: %d\n", ret);
+ return ret;
+ }
+
+ if (ret & WM831X_RTC_ALM_ENA)
+ alrm->enabled = 1;
+ else
+ alrm->enabled = 0;
+
+ return 0;
+}
+
+static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+ wm831x_rtc->alarm_enabled = 0;
+
+ return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, 0);
+}
+
+static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+ wm831x_rtc->alarm_enabled = 1;
+
+ return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA);
+}
+
+static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ struct wm831x *wm831x = wm831x_rtc->wm831x;
+ int ret;
+ unsigned long time;
+
+ ret = rtc_tm_to_time(&alrm->time, &time);
+ if (ret < 0) {
+ dev_err(dev, "Failed to convert time: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_rtc_stop_alarm(wm831x_rtc);
+ if (ret < 0) {
+ dev_err(dev, "Failed to stop alarm: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1,
+ (time >> 16) & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write ALARM_1: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write ALARM_2: %d\n", ret);
+ return ret;
+ }
+
+ if (alrm->enabled) {
+ ret = wm831x_rtc_start_alarm(wm831x_rtc);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start alarm: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int wm831x_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+
+ if (enabled)
+ return wm831x_rtc_start_alarm(wm831x_rtc);
+ else
+ return wm831x_rtc_stop_alarm(wm831x_rtc);
+}
+
+static int wm831x_rtc_update_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ int val;
+
+ if (enabled)
+ val = 1 << WM831X_RTC_PINT_FREQ_SHIFT;
+ else
+ val = 0;
+
+ return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_PINT_FREQ_MASK, val);
+}
+
+static irqreturn_t wm831x_alm_irq(int irq, void *data)
+{
+ struct wm831x_rtc *wm831x_rtc = data;
+
+ rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_per_irq(int irq, void *data)
+{
+ struct wm831x_rtc *wm831x_rtc = data;
+
+ rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_UF);
+
+ return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops wm831x_rtc_ops = {
+ .read_time = wm831x_rtc_readtime,
+ .set_time = wm831x_rtc_settime,
+ .read_alarm = wm831x_rtc_readalarm,
+ .set_alarm = wm831x_rtc_setalarm,
+ .alarm_irq_enable = wm831x_rtc_alarm_irq_enable,
+ .update_irq_enable = wm831x_rtc_update_irq_enable,
+};
+
+#ifdef CONFIG_PM
+/* Turn off the alarm if it should not be a wake source. */
+static int wm831x_rtc_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+ int ret, enable;
+
+ if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev))
+ enable = WM831X_RTC_ENA;
+ else
+ enable = 0;
+
+ ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, enable);
+ if (ret != 0)
+ dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret);
+
+ return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int wm831x_rtc_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+ int ret;
+
+ if (wm831x_rtc->alarm_enabled) {
+ ret = wm831x_rtc_start_alarm(wm831x_rtc);
+ if (ret != 0)
+ dev_err(&pdev->dev,
+ "Failed to restart RTC alarm: %d\n", ret);
+ }
+
+ return 0;
+}
+
+/* Unconditionally disable the alarm */
+static int wm831x_rtc_freeze(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+ int ret, enable;
+
+ ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, 0);
+ if (ret != 0)
+ dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret);
+
+ return 0;
+}
+#else
+#define wm831x_rtc_suspend NULL
+#define wm831x_rtc_resume NULL
+#define wm831x_rtc_freeze NULL
+#endif
+
+static int wm831x_rtc_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_rtc *wm831x_rtc;
+ int per_irq = platform_get_irq_byname(pdev, "PER");
+ int alm_irq = platform_get_irq_byname(pdev, "ALM");
+ int ret = 0;
+
+ wm831x_rtc = kzalloc(sizeof(*wm831x_rtc), GFP_KERNEL);
+ if (wm831x_rtc == NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, wm831x_rtc);
+ wm831x_rtc->wm831x = wm831x;
+ wm831x_rtc->per_irq = per_irq;
+
+ ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret);
+ goto err;
+ }
+ if (ret & WM831X_RTC_ALM_ENA)
+ wm831x_rtc->alarm_enabled = 1;
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ wm831x_rtc->rtc = rtc_device_register("wm831x", &pdev->dev,
+ &wm831x_rtc_ops, THIS_MODULE);
+ if (IS_ERR(wm831x_rtc->rtc)) {
+ ret = PTR_ERR(wm831x_rtc->rtc);
+ dev_err(&pdev->dev, "Failed to register RTC: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm831x_request_irq(wm831x, per_irq, wm831x_per_irq,
+ IRQF_TRIGGER_RISING, "wm831x_rtc_per",
+ wm831x_rtc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request periodic IRQ %d: %d\n",
+ per_irq, ret);
+ goto err_rtc;
+ }
+
+ ret = wm831x_request_irq(wm831x, alm_irq, wm831x_alm_irq,
+ IRQF_TRIGGER_RISING, "wm831x_rtc_alm",
+ wm831x_rtc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+ alm_irq, ret);
+ goto err_per;
+ }
+
+ return 0;
+
+err_per:
+ wm831x_free_irq(wm831x, per_irq, wm831x_rtc);
+err_rtc:
+ rtc_device_unregister(wm831x_rtc->rtc);
+err:
+ kfree(wm831x_rtc);
+ return ret;
+}
+
+static int __devexit wm831x_rtc_remove(struct platform_device *pdev)
+{
+ struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev);
+ int per_irq = platform_get_irq(pdev, 0);
+ int alm_irq = platform_get_irq(pdev, 1);
+
+ wm831x_free_irq(wm831x_rtc->wm831x, alm_irq, wm831x_rtc);
+ wm831x_free_irq(wm831x_rtc->wm831x, per_irq, wm831x_rtc);
+ rtc_device_unregister(wm831x_rtc->rtc);
+ kfree(wm831x_rtc);
+
+ return 0;
+}
+
+static struct dev_pm_ops wm831x_rtc_pm_ops = {
+ .suspend = wm831x_rtc_suspend,
+ .resume = wm831x_rtc_resume,
+
+ .freeze = wm831x_rtc_freeze,
+ .thaw = wm831x_rtc_resume,
+ .restore = wm831x_rtc_resume,
+
+ .poweroff = wm831x_rtc_suspend,
+};
+
+static struct platform_driver wm831x_rtc_driver = {
+ .probe = wm831x_rtc_probe,
+ .remove = __devexit_p(wm831x_rtc_remove),
+ .driver = {
+ .name = "wm831x-rtc",
+ .pm = &wm831x_rtc_pm_ops,
+ },
+};
+
+static int __init wm831x_rtc_init(void)
+{
+ return platform_driver_register(&wm831x_rtc_driver);
+}
+module_init(wm831x_rtc_init);
+
+static void __exit wm831x_rtc_exit(void)
+{
+ platform_driver_unregister(&wm831x_rtc_driver);
+}
+module_exit(wm831x_rtc_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-rtc");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 22/22] [WATCHDOG] Add support for WM831x watchdog
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (20 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices Mark Brown
@ 2009-07-27 13:46 ` Mark Brown
2009-08-04 11:35 ` [PATCH 0/22] WM831x drivers Samuel Ortiz
22 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 13:46 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Wim Van Sebroeck
The WM831x series of devices provide a watchdog with configurable
behaviour on timer expiry.
Currently this driver support refreshes via a register or GPIO line and
autonomous refreshes from a hardware source (eg, a clock).
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Wim Van Sebroeck <wim@iguana.be>
---
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/wm831x_wdt.c | 441 +++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/watchdog.h | 52 ++++
4 files changed, 501 insertions(+), 0 deletions(-)
create mode 100644 drivers/watchdog/wm831x_wdt.c
create mode 100644 include/linux/mfd/wm831x/watchdog.h
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b1ccc04..2d22ab6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -55,6 +55,13 @@ config SOFT_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called softdog.
+config WM831X_WATCHDOG
+ tristate "WM831x watchdog"
+ depends on MFD_WM831X
+ help
+ Support for the watchdog in the WM831x AudioPlus PMICs. When
+ the watchdog triggers the system will be reset.
+
config WM8350_WATCHDOG
tristate "WM8350 watchdog"
depends on MFD_WM8350
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 3d77429..244be98 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -139,5 +139,6 @@ obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
# XTENSA Architecture
# Architecture Independant
+obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
new file mode 100644
index 0000000..775bcd8
--- /dev/null
+++ b/drivers/watchdog/wm831x_wdt.c
@@ -0,0 +1,441 @@
+/*
+ * Watchdog driver for the wm831x PMICs
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/watchdog.h>
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static unsigned long wm831x_wdt_users;
+static struct miscdevice wm831x_wdt_miscdev;
+static int wm831x_wdt_expect_close;
+static DEFINE_MUTEX(wdt_mutex);
+static struct wm831x *wm831x;
+static unsigned int update_gpio;
+static unsigned int update_state;
+
+/* We can't use the sub-second values here but they're included
+ * for completeness. */
+static struct {
+ int time; /* Seconds */
+ u16 val; /* WDOG_TO value */
+} wm831x_wdt_cfgs[] = {
+ { 1, 2 },
+ { 2, 3 },
+ { 4, 4 },
+ { 8, 5 },
+ { 16, 6 },
+ { 32, 7 },
+ { 33, 7 }, /* Actually 32.768s so include both, others round down */
+};
+
+static int wm831x_wdt_set_timeout(struct wm831x *wm831x, u16 value)
+{
+ int ret;
+
+ mutex_lock(&wdt_mutex);
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret == 0) {
+ ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+ WM831X_WDOG_TO_MASK, value);
+ wm831x_reg_lock(wm831x);
+ } else {
+ dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+ ret);
+ }
+
+ mutex_unlock(&wdt_mutex);
+
+ return ret;
+}
+
+static int wm831x_wdt_start(struct wm831x *wm831x)
+{
+ int ret;
+
+ mutex_lock(&wdt_mutex);
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret == 0) {
+ ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+ WM831X_WDOG_ENA, WM831X_WDOG_ENA);
+ wm831x_reg_lock(wm831x);
+ } else {
+ dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+ ret);
+ }
+
+ mutex_unlock(&wdt_mutex);
+
+ return ret;
+}
+
+static int wm831x_wdt_stop(struct wm831x *wm831x)
+{
+ int ret;
+
+ mutex_lock(&wdt_mutex);
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret == 0) {
+ ret = wm831x_set_bits(wm831x, WM831X_WATCHDOG,
+ WM831X_WDOG_ENA, 0);
+ wm831x_reg_lock(wm831x);
+ } else {
+ dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+ ret);
+ }
+
+ mutex_unlock(&wdt_mutex);
+
+ return ret;
+}
+
+static int wm831x_wdt_kick(struct wm831x *wm831x)
+{
+ int ret;
+ u16 reg;
+
+ mutex_lock(&wdt_mutex);
+
+ if (update_gpio) {
+ gpio_set_value_cansleep(update_gpio, update_state);
+ update_state = !update_state;
+ ret = 0;
+ goto out;
+ }
+
+
+ reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+
+ if (!(reg & WM831X_WDOG_RST_SRC)) {
+ dev_err(wm831x->dev, "Hardware watchdog update unsupported\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ reg |= WM831X_WDOG_RESET;
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret == 0) {
+ ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
+ wm831x_reg_lock(wm831x);
+ } else {
+ dev_err(wm831x->dev, "Failed to unlock security key: %d\n",
+ ret);
+ }
+
+out:
+ mutex_unlock(&wdt_mutex);
+
+ return ret;
+}
+
+static int wm831x_wdt_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ if (!wm831x)
+ return -ENODEV;
+
+ if (test_and_set_bit(0, &wm831x_wdt_users))
+ return -EBUSY;
+
+ ret = wm831x_wdt_start(wm831x);
+ if (ret != 0)
+ return ret;
+
+ return nonseekable_open(inode, file);
+}
+
+static int wm831x_wdt_release(struct inode *inode, struct file *file)
+{
+ if (wm831x_wdt_expect_close)
+ wm831x_wdt_stop(wm831x);
+ else {
+ dev_warn(wm831x->dev, "Watchdog device closed uncleanly\n");
+ wm831x_wdt_kick(wm831x);
+ }
+
+ clear_bit(0, &wm831x_wdt_users);
+
+ return 0;
+}
+
+static ssize_t wm831x_wdt_write(struct file *file,
+ const char __user *data, size_t count,
+ loff_t *ppos)
+{
+ size_t i;
+
+ if (count) {
+ wm831x_wdt_kick(wm831x);
+
+ if (!nowayout) {
+ /* In case it was set long ago */
+ wm831x_wdt_expect_close = 0;
+
+ /* scan to see whether or not we got the magic
+ character */
+ for (i = 0; i != count; i++) {
+ char c;
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V')
+ wm831x_wdt_expect_close = 42;
+ }
+ }
+ }
+ return count;
+}
+
+static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "WM831x Watchdog",
+};
+
+static long wm831x_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret = -ENOTTY, time, i;
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ u16 reg;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ ret = copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ ret = put_user(0, p);
+ break;
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options;
+
+ if (get_user(options, p))
+ return -EFAULT;
+
+ ret = -EINVAL;
+
+ /* Setting both simultaneously means at least one must fail */
+ if (options == WDIOS_DISABLECARD)
+ ret = wm831x_wdt_start(wm831x);
+
+ if (options == WDIOS_ENABLECARD)
+ ret = wm831x_wdt_stop(wm831x);
+ break;
+ }
+
+ case WDIOC_KEEPALIVE:
+ ret = wm831x_wdt_kick(wm831x);
+ break;
+
+ case WDIOC_SETTIMEOUT:
+ ret = get_user(time, p);
+ if (ret)
+ break;
+
+ if (time == 0) {
+ if (nowayout)
+ ret = -EINVAL;
+ else
+ wm831x_wdt_stop(wm831x);
+ break;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+ if (wm831x_wdt_cfgs[i].time == time)
+ break;
+ if (i == ARRAY_SIZE(wm831x_wdt_cfgs))
+ ret = -EINVAL;
+ else
+ ret = wm831x_wdt_set_timeout(wm831x,
+ wm831x_wdt_cfgs[i].val);
+ break;
+
+ case WDIOC_GETTIMEOUT:
+ reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+ reg &= WM831X_WDOG_TO_MASK;
+ for (i = 0; i < ARRAY_SIZE(wm831x_wdt_cfgs); i++)
+ if (wm831x_wdt_cfgs[i].val == reg)
+ break;
+ if (i == ARRAY_SIZE(wm831x_wdt_cfgs)) {
+ dev_warn(wm831x->dev,
+ "Unknown watchdog configuration: %x\n", reg);
+ ret = -EINVAL;
+ } else
+ ret = put_user(wm831x_wdt_cfgs[i].time, p);
+
+ }
+
+ return ret;
+}
+
+static const struct file_operations wm831x_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = wm831x_wdt_write,
+ .unlocked_ioctl = wm831x_wdt_ioctl,
+ .open = wm831x_wdt_open,
+ .release = wm831x_wdt_release,
+};
+
+static struct miscdevice wm831x_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &wm831x_wdt_fops,
+};
+
+static int __devinit wm831x_wdt_probe(struct platform_device *pdev)
+{
+ struct wm831x_pdata *chip_pdata;
+ struct wm831x_watchdog_pdata *pdata;
+ int reg, ret;
+
+ wm831x = dev_get_drvdata(pdev->dev.parent);
+
+ ret = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
+ if (ret < 0) {
+ dev_err(wm831x->dev, "Failed to read watchdog status: %d\n",
+ ret);
+ goto err;
+ }
+ reg = ret;
+
+ if (reg & WM831X_WDOG_DEBUG)
+ dev_warn(wm831x->dev, "Watchdog is paused\n");
+
+ /* Apply any configuration */
+ if (pdev->dev.parent->platform_data) {
+ chip_pdata = pdev->dev.parent->platform_data;
+ pdata = chip_pdata->watchdog;
+ } else {
+ pdata = NULL;
+ }
+
+ if (pdata) {
+ reg &= ~(WM831X_WDOG_SECACT_MASK | WM831X_WDOG_PRIMACT_MASK |
+ WM831X_WDOG_RST_SRC);
+
+ reg |= pdata->primary << WM831X_WDOG_PRIMACT_SHIFT;
+ reg |= pdata->secondary << WM831X_WDOG_SECACT_SHIFT;
+ reg |= pdata->software << WM831X_WDOG_RST_SRC_SHIFT;
+
+ if (pdata->update_gpio) {
+ ret = gpio_request(pdata->update_gpio,
+ "Watchdog update");
+ if (ret < 0) {
+ dev_err(wm831x->dev,
+ "Failed to request update GPIO: %d\n",
+ ret);
+ goto err;
+ }
+
+ ret = gpio_direction_output(pdata->update_gpio, 0);
+ if (ret != 0) {
+ dev_err(wm831x->dev,
+ "gpio_direction_output returned: %d\n",
+ ret);
+ goto err_gpio;
+ }
+
+ update_gpio = pdata->update_gpio;
+
+ /* Make sure the watchdog takes hardware updates */
+ reg |= WM831X_WDOG_RST_SRC;
+ }
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret == 0) {
+ ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
+ wm831x_reg_lock(wm831x);
+ } else {
+ dev_err(wm831x->dev,
+ "Failed to unlock security key: %d\n", ret);
+ goto err_gpio;
+ }
+ }
+
+ wm831x_wdt_miscdev.parent = &pdev->dev;
+
+ ret = misc_register(&wm831x_wdt_miscdev);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to register miscdev: %d\n", ret);
+ goto err_gpio;
+ }
+
+ return 0;
+
+err_gpio:
+ if (update_gpio) {
+ gpio_free(update_gpio);
+ update_gpio = 0;
+ }
+err:
+ return ret;
+}
+
+static int __devexit wm831x_wdt_remove(struct platform_device *pdev)
+{
+ if (update_gpio) {
+ gpio_free(update_gpio);
+ update_gpio = 0;
+ }
+
+ misc_deregister(&wm831x_wdt_miscdev);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_wdt_driver = {
+ .probe = wm831x_wdt_probe,
+ .remove = __devexit_p(wm831x_wdt_remove),
+ .driver = {
+ .name = "wm831x-watchdog",
+ },
+};
+
+static int __init wm831x_wdt_init(void)
+{
+ return platform_driver_register(&wm831x_wdt_driver);
+}
+module_init(wm831x_wdt_init);
+
+static void __exit wm831x_wdt_exit(void)
+{
+ platform_driver_unregister(&wm831x_wdt_driver);
+}
+module_exit(wm831x_wdt_exit);
+
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x Watchdog");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-watchdog");
diff --git a/include/linux/mfd/wm831x/watchdog.h b/include/linux/mfd/wm831x/watchdog.h
new file mode 100644
index 0000000..97a99b5
--- /dev/null
+++ b/include/linux/mfd/wm831x/watchdog.h
@@ -0,0 +1,52 @@
+/*
+ * include/linux/mfd/wm831x/watchdog.h -- Watchdog for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_WATCHDOG_H__
+#define __MFD_WM831X_WATCHDOG_H__
+
+
+/*
+ * R16388 (0x4004) - Watchdog
+ */
+#define WM831X_WDOG_ENA 0x8000 /* WDOG_ENA */
+#define WM831X_WDOG_ENA_MASK 0x8000 /* WDOG_ENA */
+#define WM831X_WDOG_ENA_SHIFT 15 /* WDOG_ENA */
+#define WM831X_WDOG_ENA_WIDTH 1 /* WDOG_ENA */
+#define WM831X_WDOG_DEBUG 0x4000 /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_MASK 0x4000 /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_SHIFT 14 /* WDOG_DEBUG */
+#define WM831X_WDOG_DEBUG_WIDTH 1 /* WDOG_DEBUG */
+#define WM831X_WDOG_RST_SRC 0x2000 /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_MASK 0x2000 /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_SHIFT 13 /* WDOG_RST_SRC */
+#define WM831X_WDOG_RST_SRC_WIDTH 1 /* WDOG_RST_SRC */
+#define WM831X_WDOG_SLPENA 0x1000 /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_MASK 0x1000 /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_SHIFT 12 /* WDOG_SLPENA */
+#define WM831X_WDOG_SLPENA_WIDTH 1 /* WDOG_SLPENA */
+#define WM831X_WDOG_RESET 0x0800 /* WDOG_RESET */
+#define WM831X_WDOG_RESET_MASK 0x0800 /* WDOG_RESET */
+#define WM831X_WDOG_RESET_SHIFT 11 /* WDOG_RESET */
+#define WM831X_WDOG_RESET_WIDTH 1 /* WDOG_RESET */
+#define WM831X_WDOG_SECACT_MASK 0x0300 /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_SECACT_SHIFT 8 /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_SECACT_WIDTH 2 /* WDOG_SECACT - [9:8] */
+#define WM831X_WDOG_PRIMACT_MASK 0x0030 /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_PRIMACT_SHIFT 4 /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_PRIMACT_WIDTH 2 /* WDOG_PRIMACT - [5:4] */
+#define WM831X_WDOG_TO_MASK 0x0007 /* WDOG_TO - [2:0] */
+#define WM831X_WDOG_TO_SHIFT 0 /* WDOG_TO - [2:0] */
+#define WM831X_WDOG_TO_WIDTH 3 /* WDOG_TO - [2:0] */
+
+#endif
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH] mfd: Fix comment cut'n'paste in register lock code
2009-07-27 13:45 ` [PATCH 02/22] mfd: Initial core support for WM831x series devices Mark Brown
@ 2009-07-27 15:00 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 15:00 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/mfd/wm831x-core.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c
index 49b7885..05e5724 100644
--- a/drivers/mfd/wm831x-core.c
+++ b/drivers/mfd/wm831x-core.c
@@ -115,11 +115,11 @@ static int wm831x_reg_locked(struct wm831x *wm831x, unsigned short reg)
}
/**
- * wm831x_reg_unlock: Unlock user keyed registers
+ * wm831x_reg_lock: Unlock user keyed registers
*
* The WM831x has a user key preventing writes to particularly
* critical registers. This function locks those registers,
- * allowing writes to them.
+ * disallowing writes to them.
*/
void wm831x_reg_lock(struct wm831x *wm831x)
{
@@ -145,7 +145,7 @@ EXPORT_SYMBOL_GPL(wm831x_reg_lock);
*
* The WM831x has a user key preventing writes to particularly
* critical registers. This function locks those registers,
- * preventing spurious writes.
+ * allowing writes to them.
*/
int wm831x_reg_unlock(struct wm831x *wm831x)
{
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH 13/22] Input: Add support for the WM831x ON pin
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
@ 2009-07-27 15:38 ` Dmitry Torokhov
2009-07-27 15:41 ` Mark Brown
2009-07-28 14:13 ` [PATCH] " Mark Brown
1 sibling, 1 reply; 46+ messages in thread
From: Dmitry Torokhov @ 2009-07-27 15:38 UTC (permalink / raw)
To: Mark Brown; +Cc: Samuel Ortiz, linux-kernel, linux-input
Hi Mark,
On Mon, Jul 27, 2009 at 02:46:03PM +0100, Mark Brown wrote:
> --- /dev/null
> +++ b/drivers/input/misc/wm831x-on.c
> @@ -0,0 +1,163 @@
> +/**
> + * wm831x-on.c - WM831X ON pind river
> + *
"Pind river"? ;)
> +
> +static irqreturn_t wm831x_on_irq(int irq, void *data)
> +{
> + struct wm831x_on *wm831x_on = data;
> +
> + schedule_work(&wm831x_on->work.work);
schedule_delayed_work(&wm831x_on->work, 0); - I prefer not to expose
delayed work implementation details.
Other than that:
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Freel free to push this with the rest of the series. If that does not
work out let me know and I will get this driver into my tree.
Thanks!
--
Dmitry
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH 13/22] Input: Add support for the WM831x ON pin
2009-07-27 15:38 ` Dmitry Torokhov
@ 2009-07-27 15:41 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-27 15:41 UTC (permalink / raw)
To: Dmitry Torokhov; +Cc: Samuel Ortiz, linux-kernel, linux-input
On Mon, Jul 27, 2009 at 08:38:05AM -0700, Dmitry Torokhov wrote:
> On Mon, Jul 27, 2009 at 02:46:03PM +0100, Mark Brown wrote:
> > + * wm831x-on.c - WM831X ON pind river
> "Pind river"? ;)
Err, yes. Highly innovative new technology!
> > +static irqreturn_t wm831x_on_irq(int irq, void *data)
> > +{
> > + struct wm831x_on *wm831x_on = data;
> > +
> > + schedule_work(&wm831x_on->work.work);
> schedule_delayed_work(&wm831x_on->work, 0); - I prefer not to expose
> delayed work implementation details.
> Other than that:
> Acked-by: Dmitry Torokhov <dtor@mail.ru>
> Freel free to push this with the rest of the series. If that does not
> work out let me know and I will get this driver into my tree.
OK, I'll fix that when I resend. Thanks.
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] [PATCH 12/22] hwmon: WM831x PMIC hardware monitoring driver
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
@ 2009-07-27 19:44 ` Jean Delvare
2009-07-27 20:46 ` Mark Brown
2009-07-28 14:11 ` [PATCH] " Mark Brown
1 sibling, 1 reply; 46+ messages in thread
From: Jean Delvare @ 2009-07-27 19:44 UTC (permalink / raw)
To: Mark Brown; +Cc: Samuel Ortiz, linux-kernel, lm-sensors
Hi Mark,
On Mon, 27 Jul 2009 14:46:02 +0100, Mark Brown wrote:
> This driver adds support for the hardware monitoring features of
> the WM831x PMICs to the hwmon API. Monitoring is provided for
> the system voltages supported natively by the WM831x, the chip
> temperature, the battery temperature and the auxiliary inputs
> of the WM831x.
>
> Currently no alarms are supported, though digital comparators on
> the WM831x devices would allow these to be provided.
>
> Since the auxiliary and battery temperature input scaling depends
> on the system configuration raw ADC values are reported with scaling
> left to userspace.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: lm-sensors@lm-sensors.org
> ---
> Documentation/hwmon/wm831x | 37 +++++++
> drivers/hwmon/Kconfig | 11 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/wm831x-hwmon.c | 236 ++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 285 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/hwmon/wm831x
> create mode 100644 drivers/hwmon/wm831x-hwmon.c
Quick review:
> diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
> new file mode 100644
> index 0000000..999e525
> --- /dev/null
> +++ b/Documentation/hwmon/wm831x
> @@ -0,0 +1,37 @@
> +Kernel driver wm831x-hwmon
> +==========================
> +
> +Supported chips:
> + * Wolfson Microelectronics WM831x PMICs
> + Prefix: 'wm831x'
> + Datasheet:
> + http://www.wolfsonmicro.com/products/WM8310
> + http://www.wolfsonmicro.com/products/WM8311
> + http://www.wolfsonmicro.com/products/WM8312
> +
> +Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
> +
> +Description
> +-----------
> +
> +The WM831x series of PMICs include an AUXADC which can be used to
> +monitor a range of system operating parameters, including the voltages
> +of the major supplies within the system. Currently the driver provides
> +reporting of all the input values but does not provide any alarms.
> +
> +Voltage Monitoring
> +------------------
> +
> +Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465
> +times the ADC value.
> +
> +Temperature Monitoring
> +----------------------
> +
> +Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
> +are available. The chip temperature is calculated as:
> +
> + Degrees celsius = (512.8 - data) / 1.0983
The driver code says 512.18.
> +
> +while the battery temperature calculation will depend on the NTC
> +termistor component.
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8d17135..6a680e2 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -930,6 +930,17 @@ config SENSORS_W83627EHF
> This driver can also be built as a module. If so, the module
> will be called w83627ehf.
>
> +config SENSORS_WM831X
> + tristate "WM831x PMICs"
> + depends on MFD_WM831X
> + help
> + If you say yes here you get support for the hardware
> + monitoring functionality of the Wolfson Microelectronics
> + WM831x series of PMICs.
> +
> + This driver can also be built as a module. If so, the module
> + will be called wm831x-hwmon.
> +
> config SENSORS_WM8350
> tristate "Wolfson Microelectronics WM835x"
> depends on MFD_WM8350
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 6126257..a7e7eb7 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
> obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
> obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
> obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
> +obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
FWIW, I tend to dislike "x" for digits in driver names. What if a
WM8315 chip is ever released and is incompatible with the WM8310 as far
as hardware monitoring is concerned? The driver name suggests the new
chip is supported while it isn't.
Additionally it is inconsistent with the naming of the WM8350 driver
below.
> obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
>
> ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
> diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
> new file mode 100644
> index 0000000..0dd9973
> --- /dev/null
> +++ b/drivers/hwmon/wm831x-hwmon.c
> @@ -0,0 +1,236 @@
> +/*
> + * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
> + * hardware monitoring features.
> + *
> + * Copyright (C) 2009 Wolfson Microelectronics plc
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License v2 as published by the
> + * Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#include <linux/mfd/wm831x/core.h>
> +#include <linux/mfd/wm831x/auxadc.h>
> +
> +struct wm831x_hwmon {
> + struct wm831x *wm831x;
> + struct device *classdev;
> +};
> +
> +static ssize_t show_name(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "wm831x\n");
> +}
> +
> +static const char *input_names[] = {
> + [WM831X_AUX_SYSVDD] = "SYSVDD" ,
> + [WM831X_AUX_USB] = "USB" ,
Stray spaces before commas.
> + [WM831X_AUX_BKUP_BATT] = "Backup battery",
This one isn't used anywhere?
> + [WM831X_AUX_BATT] = "Battery",
> + [WM831X_AUX_WALL] = "WALL",
> + [WM831X_AUX_CHIP_TEMP] = "PMIC",
> + [WM831X_AUX_BATT_TEMP] = "Battery",
> +};
> +
> +
> +static ssize_t show_voltage(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(attr)->index;
> + int ret;
> +
> + ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
> +}
> +
> +static ssize_t show_chip_temp(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(attr)->index;
> + int ret;
> +
> + ret = wm831x_auxadc_read(hwmon->wm831x, channel);
> + if (ret < 0)
> + return ret;
> +
> + /* Degrees celsius = (512.18-ret) / 1.0983 */
> + ret = 512180 - (ret * 1000);
> + ret = (ret * 10000) / 10983;
DIV_ROUND_CLOSEST() would give you a more accurate result.
> +
> + return sprintf(buf, "%d\n", ret);
> +}
> +
> +static ssize_t show_batt_temp(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(attr)->index;
> + int ret;
> +
> + ret = wm831x_auxadc_read(hwmon->wm831x, channel);
> + if (ret < 0)
> + return ret;
> +
> + /* The conversion depends on the battery, leave to userspace */
> + return sprintf(buf, "%d\n", ret);
> +}
This is a problem. You are not supposed to return raw register values through
the sysfs interface. Returning the voltage reading at the chip's pin is
OK because you still return a voltage value. But a raw register value is
not something the user should see. I agree that technically speaking, a
good sensors.conf configuration file would work it out, but
conceptually this is wrong.
Can you say more about these batteries and how temperature measurement
is different between them? If you can export a voltage reading to
userspace than that would be OK (as I recall, we have at least one
driver doing that already.)
> +
> +static ssize_t show_label(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int channel = to_sensor_dev_attr(attr)->index;
> +
> + return sprintf(buf, "%s\n", input_names[channel]);
> +}
> +
> +#define WM831X_VOLTAGE(id, name) \
> + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
> + NULL, name);
Trailing semi-colon not needed.
> +
> +#define WM831X_NAMED_VOLTAGE(id, name) \
> + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
> + NULL, name); \
I guess you could just call WM831X_VOLTAGE(id, name).
> + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
> + NULL, name)
> +
> +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
> +
> +WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
> +WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
> +WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
> +WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
> +
> +WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
> +WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
> +WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
> +WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
> +
> +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
> + WM831X_AUX_CHIP_TEMP);
> +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
> + WM831X_AUX_CHIP_TEMP);
> +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_batt_temp, NULL,
> + WM831X_AUX_BATT_TEMP);
> +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
> + WM831X_AUX_BATT_TEMP);
> +
> +static struct attribute *wm831x_attributes[] = {
> + &dev_attr_name.attr,
> +
> + &sensor_dev_attr_in0_input.dev_attr.attr,
> + &sensor_dev_attr_in1_input.dev_attr.attr,
> + &sensor_dev_attr_in2_input.dev_attr.attr,
> + &sensor_dev_attr_in3_input.dev_attr.attr,
> +
> + &sensor_dev_attr_in4_input.dev_attr.attr,
> + &sensor_dev_attr_in4_label.dev_attr.attr,
> + &sensor_dev_attr_in5_input.dev_attr.attr,
> + &sensor_dev_attr_in5_label.dev_attr.attr,
> + &sensor_dev_attr_in6_input.dev_attr.attr,
> + &sensor_dev_attr_in6_label.dev_attr.attr,
> + &sensor_dev_attr_in7_input.dev_attr.attr,
> + &sensor_dev_attr_in7_label.dev_attr.attr,
> +
> + &sensor_dev_attr_temp1_input.dev_attr.attr,
> + &sensor_dev_attr_temp1_label.dev_attr.attr,
> + &sensor_dev_attr_temp2_input.dev_attr.attr,
> + &sensor_dev_attr_temp2_label.dev_attr.attr,
> +
> + NULL,
Trailing comma unneeded, you're never going to add something after this
NULL.
> +};
> +
> +static const struct attribute_group wm831x_attr_group = {
> + .attrs = wm831x_attributes,
> +};
> +
> +static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
> +{
> + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
> + struct wm831x_hwmon *hwmon;
> + int ret;
> +
> + hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
> + if (!hwmon)
> + return -ENOMEM;
> +
> + hwmon->wm831x = wm831x;
> +
> + ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
> + if (ret)
> + goto err;
> +
> + hwmon->classdev = hwmon_device_register(&pdev->dev);
> + if (IS_ERR(hwmon->classdev)) {
> + ret = PTR_ERR(hwmon->classdev);
> + goto err_sysfs;
> + }
> +
> + platform_set_drvdata(pdev, hwmon);
> +
> + return 0;
> +
> +err_sysfs:
> + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
> +err:
> + kfree(hwmon);
> + return ret;
> +}
> +
> +static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
> +{
> + struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
> +
May I suggest adding:
platform_set_drvdata(pdev, NULL);
to avoid leaving a dangling pointer behind?
> + hwmon_device_unregister(hwmon->classdev);
> + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
> + kfree(hwmon);
> +
> + return 0;
> +}
> +
> +static struct platform_driver wm831x_hwmon_driver = {
> + .probe = wm831x_hwmon_probe,
> + .remove = __devexit_p(wm831x_hwmon_remove),
> + .driver = {
> + .name = "wm831x-hwmon",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init wm831x_hwmon_init(void)
> +{
> + return platform_driver_register(&wm831x_hwmon_driver);
> +}
> +module_init(wm831x_hwmon_init);
> +
> +static void __exit wm831x_hwmon_exit(void)
> +{
> + platform_driver_unregister(&wm831x_hwmon_driver);
> +}
> +module_exit(wm831x_hwmon_exit);
> +
> +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
> +MODULE_DESCRIPTION("WM831x Hardware Monitoring");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:wm831x-hwmon");
The rest looks good to me.
--
Jean Delvare
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH 10/22] gpio: Add WM831X GPIO driver
2009-07-27 13:46 ` [PATCH 10/22] gpio: Add WM831X GPIO driver Mark Brown
@ 2009-07-27 20:27 ` David Brownell
0 siblings, 0 replies; 46+ messages in thread
From: David Brownell @ 2009-07-27 20:27 UTC (permalink / raw)
To: Mark Brown; +Cc: Samuel Ortiz, linux-kernel
On Monday 27 July 2009, Mark Brown wrote:
> Add support for the GPIO pins on the WM831x. No direct support is
> currently supplied for configuring non-gpiolib functionality such
> as pull configuration and alternate functions, soft configuration
> of these will be provided in a future patch.
>
> Currently use of these pins as interrupts is not supported due to
> the ongoing issues with generic irq not support interrupt controllers
> on interrupt driven buses. Users can directly request the interrupts
> with the wm831x-specific APIs currently provided if required.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
> ---
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/wm831x-gpio.c | 252 +++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/wm831x/gpio.h | 55 +++++++++
> 4 files changed, 315 insertions(+), 0 deletions(-)
> create mode 100644 drivers/gpio/wm831x-gpio.c
> create mode 100644 include/linux/mfd/wm831x/gpio.h
>
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 96dda81..6b4c484 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -155,6 +155,13 @@ config GPIO_TWL4030
> Say yes here to access the GPIO signals of various multi-function
> power management chips from Texas Instruments.
>
> +config GPIO_WM831X
> + tristate "WM831x GPIOs"
> + depends on MFD_WM831X
> + help
> + Say yes here to access the GPIO signals of WM831x power management
> + chips from Wolfson Microelectronics.
> +
> comment "PCI GPIO expanders:"
>
> config GPIO_BT8XX
> diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> index 9244c6f..ea7c745 100644
> --- a/drivers/gpio/Makefile
> +++ b/drivers/gpio/Makefile
> @@ -14,3 +14,4 @@ obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o
> obj-$(CONFIG_GPIO_XILINX) += xilinx_gpio.o
> obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o
> obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o
> +obj-$(CONFIG_GPIO_WM831X) += wm831x-gpio.o
> diff --git a/drivers/gpio/wm831x-gpio.c b/drivers/gpio/wm831x-gpio.c
> new file mode 100644
> index 0000000..f9c09a5
> --- /dev/null
> +++ b/drivers/gpio/wm831x-gpio.c
> @@ -0,0 +1,252 @@
> +/*
> + * wm831x-gpio.c -- gpiolib support for Wolfson WM831x PMICs
> + *
> + * Copyright 2009 Wolfson Microelectronics PLC.
> + *
> + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/gpio.h>
> +#include <linux/mfd/core.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +
> +#include <linux/mfd/wm831x/core.h>
> +#include <linux/mfd/wm831x/pdata.h>
> +#include <linux/mfd/wm831x/gpio.h>
> +
> +#define WM831X_GPIO_MAX 16
> +
> +struct wm831x_gpio {
> + struct wm831x *wm831x;
> + struct gpio_chip gpio_chip;
> +};
> +
> +static inline struct wm831x_gpio *to_wm831x_gpio(struct gpio_chip *chip)
> +{
> + return container_of(chip, struct wm831x_gpio, gpio_chip);
> +}
> +
> +static int wm831x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
> +{
> + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
> + struct wm831x *wm831x = wm831x_gpio->wm831x;
> +
> + return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
> + WM831X_GPN_DIR | WM831X_GPN_TRI,
> + WM831X_GPN_DIR);
> +}
> +
> +static int wm831x_gpio_get(struct gpio_chip *chip, unsigned offset)
> +{
> + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
> + struct wm831x *wm831x = wm831x_gpio->wm831x;
> + int ret;
> +
> + ret = wm831x_reg_read(wm831x, WM831X_GPIO_LEVEL);
> + if (ret < 0)
> + return ret;
> +
> + if (ret & 1 << offset)
> + return 1;
> + else
> + return 0;
> +}
> +
> +static int wm831x_gpio_direction_out(struct gpio_chip *chip,
> + unsigned offset, int value)
> +{
> + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
> + struct wm831x *wm831x = wm831x_gpio->wm831x;
> +
> + return wm831x_set_bits(wm831x, WM831X_GPIO1_CONTROL + offset,
> + WM831X_GPN_DIR | WM831X_GPN_TRI, 0);
> +}
> +
> +static void wm831x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
> +{
> + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
> + struct wm831x *wm831x = wm831x_gpio->wm831x;
> +
> + wm831x_set_bits(wm831x, WM831X_GPIO_LEVEL, 1 << offset,
> + value << offset);
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +static void wm831x_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
> +{
> + struct wm831x_gpio *wm831x_gpio = to_wm831x_gpio(chip);
> + struct wm831x *wm831x = wm831x_gpio->wm831x;
> + int i;
> +
> + for (i = 0; i < chip->ngpio; i++) {
> + int gpio = i + chip->base;
> + int reg;
> + const char *label, *pull, *powerdomain;
> +
> + /* We report the GPIO even if it's not requested since
> + * we're also reporting things like alternate
> + * functions which apply even when the GPIO is not in
> + * use as a GPIO.
> + */
> + label = gpiochip_is_requested(chip, i);
> + if (!label)
> + label = "Unrequested";
> +
> + seq_printf(s, " gpio-%-3d (%-20.20s) ", gpio, label);
> +
> + reg = wm831x_reg_read(wm831x, WM831X_GPIO1_CONTROL + i);
> + if (reg < 0) {
> + dev_err(wm831x->dev,
> + "GPIO control %d read failed: %d\n",
> + gpio, reg);
> + seq_printf(s, "\n");
> + continue;
> + }
> +
> + switch (reg & WM831X_GPN_PULL_MASK) {
> + case WM831X_GPIO_PULL_NONE:
> + pull = "nopull";
> + break;
> + case WM831X_GPIO_PULL_DOWN:
> + pull = "pulldown";
> + break;
> + case WM831X_GPIO_PULL_UP:
> + pull = "pullup";
> + default:
> + pull = "INVALID PULL";
> + break;
> + }
> +
> + switch (i + 1) {
> + case 1 ... 3:
> + case 7 ... 9:
> + if (reg & WM831X_GPN_PWR_DOM)
> + powerdomain = "VPMIC";
> + else
> + powerdomain = "DBVDD";
> + break;
> +
> + case 4 ... 6:
> + case 10 ... 12:
> + if (reg & WM831X_GPN_PWR_DOM)
> + powerdomain = "SYSVDD";
> + else
> + powerdomain = "DBVDD";
> + break;
> +
> + case 13 ... 16:
> + powerdomain = "TPVDD";
> + break;
> +
> + default:
> + BUG();
> + break;
> + }
> +
> + seq_printf(s, " %s %s %s %s%s\n"
> + " %s%s (0x%4x)\n",
> + reg & WM831X_GPN_DIR ? "in" : "out",
> + wm831x_gpio_get(chip, i) ? "high" : "low",
> + pull,
> + powerdomain,
> + reg & WM831X_GPN_POL ? " inverted" : "",
> + reg & WM831X_GPN_OD ? "open-drain" : "CMOS",
> + reg & WM831X_GPN_TRI ? " tristated" : "",
> + reg);
> + }
> +}
> +#else
> +#define wm831x_gpio_dbg_show NULL
> +#endif
> +
> +static struct gpio_chip template_chip = {
> + .label = "wm831x",
> + .owner = THIS_MODULE,
> + .direction_input = wm831x_gpio_direction_in,
> + .get = wm831x_gpio_get,
> + .direction_output = wm831x_gpio_direction_out,
> + .set = wm831x_gpio_set,
> + .dbg_show = wm831x_gpio_dbg_show,
> + .can_sleep = 1,
> +};
> +
> +static int __devinit wm831x_gpio_probe(struct platform_device *pdev)
> +{
> + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
> + struct wm831x_pdata *pdata = wm831x->dev->platform_data;
> + struct wm831x_gpio *wm831x_gpio;
> + int ret;
> +
> + wm831x_gpio = kzalloc(sizeof(*wm831x_gpio), GFP_KERNEL);
> + if (wm831x_gpio == NULL)
> + return -ENOMEM;
> +
> + wm831x_gpio->wm831x = wm831x;
> + wm831x_gpio->gpio_chip = template_chip;
> + wm831x_gpio->gpio_chip.ngpio = WM831X_GPIO_MAX;
> + wm831x_gpio->gpio_chip.dev = &pdev->dev;
> + if (pdata && pdata->gpio_base)
> + wm831x_gpio->gpio_chip.base = pdata->gpio_base;
> + else
> + wm831x_gpio->gpio_chip.base = -1;
> +
> + ret = gpiochip_add(&wm831x_gpio->gpio_chip);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
> + ret);
> + goto err;
> + }
> +
> + platform_set_drvdata(pdev, wm831x_gpio);
> +
> + return ret;
> +
> +err:
> + kfree(wm831x_gpio);
> + return ret;
> +}
> +
> +static int __devexit wm831x_gpio_remove(struct platform_device *pdev)
> +{
> + struct wm831x_gpio *wm831x_gpio = platform_get_drvdata(pdev);
> + int ret;
> +
> + ret = gpiochip_remove(&wm831x_gpio->gpio_chip);
> + if (ret == 0)
> + kfree(wm831x_gpio);
> +
> + return ret;
> +}
> +
> +static struct platform_driver wm831x_gpio_driver = {
> + .driver.name = "wm831x-gpio",
> + .driver.owner = THIS_MODULE,
> + .probe = wm831x_gpio_probe,
> + .remove = __devexit_p(wm831x_gpio_remove),
> +};
> +
> +static int __init wm831x_gpio_init(void)
> +{
> + return platform_driver_register(&wm831x_gpio_driver);
> +}
> +subsys_initcall(wm831x_gpio_init);
> +
> +static void __exit wm831x_gpio_exit(void)
> +{
> + platform_driver_unregister(&wm831x_gpio_driver);
> +}
> +module_exit(wm831x_gpio_exit);
> +
> +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
> +MODULE_DESCRIPTION("GPIO interface for WM831x PMICs");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:wm831x-gpio");
> diff --git a/include/linux/mfd/wm831x/gpio.h b/include/linux/mfd/wm831x/gpio.h
> new file mode 100644
> index 0000000..2835614
> --- /dev/null
> +++ b/include/linux/mfd/wm831x/gpio.h
> @@ -0,0 +1,55 @@
> +/*
> + * include/linux/mfd/wm831x/gpio.h -- GPIO for WM831x
> + *
> + * Copyright 2009 Wolfson Microelectronics PLC.
> + *
> + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + */
> +
> +#ifndef __MFD_WM831X_GPIO_H__
> +#define __MFD_WM831X_GPIO_H__
> +
> +/*
> + * R16440-16455 (0x4038-0x4047) - GPIOx Control
> + */
> +#define WM831X_GPN_DIR 0x8000 /* GPN_DIR */
> +#define WM831X_GPN_DIR_MASK 0x8000 /* GPN_DIR */
> +#define WM831X_GPN_DIR_SHIFT 15 /* GPN_DIR */
> +#define WM831X_GPN_DIR_WIDTH 1 /* GPN_DIR */
> +#define WM831X_GPN_PULL_MASK 0x6000 /* GPN_PULL - [14:13] */
> +#define WM831X_GPN_PULL_SHIFT 13 /* GPN_PULL - [14:13] */
> +#define WM831X_GPN_PULL_WIDTH 2 /* GPN_PULL - [14:13] */
> +#define WM831X_GPN_INT_MODE 0x1000 /* GPN_INT_MODE */
> +#define WM831X_GPN_INT_MODE_MASK 0x1000 /* GPN_INT_MODE */
> +#define WM831X_GPN_INT_MODE_SHIFT 12 /* GPN_INT_MODE */
> +#define WM831X_GPN_INT_MODE_WIDTH 1 /* GPN_INT_MODE */
> +#define WM831X_GPN_PWR_DOM 0x0800 /* GPN_PWR_DOM */
> +#define WM831X_GPN_PWR_DOM_MASK 0x0800 /* GPN_PWR_DOM */
> +#define WM831X_GPN_PWR_DOM_SHIFT 11 /* GPN_PWR_DOM */
> +#define WM831X_GPN_PWR_DOM_WIDTH 1 /* GPN_PWR_DOM */
> +#define WM831X_GPN_POL 0x0400 /* GPN_POL */
> +#define WM831X_GPN_POL_MASK 0x0400 /* GPN_POL */
> +#define WM831X_GPN_POL_SHIFT 10 /* GPN_POL */
> +#define WM831X_GPN_POL_WIDTH 1 /* GPN_POL */
> +#define WM831X_GPN_OD 0x0200 /* GPN_OD */
> +#define WM831X_GPN_OD_MASK 0x0200 /* GPN_OD */
> +#define WM831X_GPN_OD_SHIFT 9 /* GPN_OD */
> +#define WM831X_GPN_OD_WIDTH 1 /* GPN_OD */
> +#define WM831X_GPN_TRI 0x0080 /* GPN_TRI */
> +#define WM831X_GPN_TRI_MASK 0x0080 /* GPN_TRI */
> +#define WM831X_GPN_TRI_SHIFT 7 /* GPN_TRI */
> +#define WM831X_GPN_TRI_WIDTH 1 /* GPN_TRI */
> +#define WM831X_GPN_FN_MASK 0x000F /* GPN_FN - [3:0] */
> +#define WM831X_GPN_FN_SHIFT 0 /* GPN_FN - [3:0] */
> +#define WM831X_GPN_FN_WIDTH 4 /* GPN_FN - [3:0] */
> +
> +#define WM831X_GPIO_PULL_NONE (0 << WM831X_GPN_PULL_SHIFT)
> +#define WM831X_GPIO_PULL_DOWN (1 << WM831X_GPN_PULL_SHIFT)
> +#define WM831X_GPIO_PULL_UP (2 << WM831X_GPN_PULL_SHIFT)
> +#endif
> --
> 1.6.3.3
>
>
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] [PATCH 12/22] hwmon: WM831x PMIC hardware monitoring driver
2009-07-27 19:44 ` [lm-sensors] " Jean Delvare
@ 2009-07-27 20:46 ` Mark Brown
2009-07-28 7:26 ` Jean Delvare
0 siblings, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-27 20:46 UTC (permalink / raw)
To: Jean Delvare; +Cc: Samuel Ortiz, linux-kernel, lm-sensors
On Mon, Jul 27, 2009 at 09:44:19PM +0200, Jean Delvare wrote:
> On Mon, 27 Jul 2009 14:46:02 +0100, Mark Brown wrote:
> > +Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
> > +are available. The chip temperature is calculated as:
> > + Degrees celsius = (512.8 - data) / 1.0983
> The driver code says 512.18.
The code is correct, will update.
> > obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
> > +obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
> FWIW, I tend to dislike "x" for digits in driver names. What if a
Neither naming convention is entirely satisfactory; whatever is chosen
will cause hassle or confusion or some point. It's one of those things
where I do find myself wishing for code names.
> Additionally it is inconsistent with the naming of the WM8350 driver
> below.
Yes, the WM8350 drivers (well, most of it) predate the WM8351 and
WM8352.
> > + /* The conversion depends on the battery, leave to userspace */
> > + return sprintf(buf, "%d\n", ret);
> > +}
> This is a problem. You are not supposed to return raw register values through
> the sysfs interface. Returning the voltage reading at the chip's pin is
> OK because you still return a voltage value. But a raw register value is
> not something the user should see. I agree that technically speaking, a
> good sensors.conf configuration file would work it out, but
> conceptually this is wrong.
Hrm, OK. There's a potential small loss of accuracy from converting to
a voltage since the voltages are reported as milivolts but it is just a
simple multiplier.
> Can you say more about these batteries and how temperature measurement
> is different between them? If you can export a voltage reading to
> userspace than that would be OK (as I recall, we have at least one
> driver doing that already.)
Not really; it's intended to be a NTC thermistor but the driver is
rather at the mercy of the battery and any other external components
that the board has added. I'll convert to reporting as a voltage for
consistency with the ABI.
> > +#define WM831X_NAMED_VOLTAGE(id, name) \
> > + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
> > + NULL, name); \
>
> I guess you could just call WM831X_VOLTAGE(id, name).
That clashes with the unnamed voltage above. I could also call them
_NAMED and _UNNAMED, I suppose.
I've fixed all your other issues, will repost tomorrow.
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [lm-sensors] [PATCH 12/22] hwmon: WM831x PMIC hardware monitoring driver
2009-07-27 20:46 ` Mark Brown
@ 2009-07-28 7:26 ` Jean Delvare
0 siblings, 0 replies; 46+ messages in thread
From: Jean Delvare @ 2009-07-28 7:26 UTC (permalink / raw)
To: Mark Brown; +Cc: Samuel Ortiz, linux-kernel, lm-sensors
On Mon, 27 Jul 2009 21:46:14 +0100, Mark Brown wrote:
> On Mon, Jul 27, 2009 at 09:44:19PM +0200, Jean Delvare wrote:
> > On Mon, 27 Jul 2009 14:46:02 +0100, Mark Brown wrote:
> > > +#define WM831X_NAMED_VOLTAGE(id, name) \
> > > + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage,\
> > > + NULL, name); \
> >
> > I guess you could just call WM831X_VOLTAGE(id, name).
>
> That clashes with the unnamed voltage above. I could also call them
> _NAMED and _UNNAMED, I suppose.
Sorry for not being clear. I simply meant you could write the following:
define WM831X_VOLTAGE(id, name) \
static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
NULL, name)
#define WM831X_NAMED_VOLTAGE(id, name) \
WM831X_VOLTAGE(id, name); \
static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
NULL, name)
Which makes it more obvious that WM831X_NAMED_VOLTAGE is WM831X_VOLTAGE
+ label. But it's really up to you which way you prefer.
--
Jean Delvare
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH] hwmon: WM831x PMIC hardware monitoring driver
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
2009-07-27 19:44 ` [lm-sensors] " Jean Delvare
@ 2009-07-28 14:11 ` Mark Brown
2009-07-28 14:26 ` Jean Delvare
1 sibling, 1 reply; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:11 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, lm-sensors, Mark Brown, Jean Delvare
This driver adds support for the hardware monitoring features of
the WM831x PMICs to the hwmon API. Monitoring is provided for
the system voltages supported natively by the WM831x, the chip
temperature, the battery temperature and the auxiliary inputs
of the WM831x.
Currently no alarms are supported, though digital comparators on
the WM831x devices would allow these to be provided.
Since the auxiliary and battery temperature input scaling depends
on the system configuration the value is reported as a voltage to
userspace.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: lm-sensors@lm-sensors.org
---
Changes from review from Jean:
- Hook up backup battery monitoring.
- Use DIV_ROUND_CLOSEST().
- Report battery temperature as a voltage.
- Various formatting cleanups.
Documentation/hwmon/wm831x | 37 +++++++
drivers/hwmon/Kconfig | 11 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/wm831x-hwmon.c | 240 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 289 insertions(+), 0 deletions(-)
create mode 100644 Documentation/hwmon/wm831x
create mode 100644 drivers/hwmon/wm831x-hwmon.c
diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
new file mode 100644
index 0000000..ab10068
--- /dev/null
+++ b/Documentation/hwmon/wm831x
@@ -0,0 +1,37 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+ * Wolfson Microelectronics WM831x PMICs
+ Prefix: 'wm831x'
+ Datasheet:
+ http://www.wolfsonmicro.com/products/WM8310
+ http://www.wolfsonmicro.com/products/WM8311
+ http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system. Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
+are available. The chip temperature is calculated as:
+
+ Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+termistor component.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8d17135..ed85909 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -930,6 +930,17 @@ config SENSORS_W83627EHF
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_WM831X
+ tristate "WM831x PMICs"
+ depends on MFD_WM831X
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Wolfson Microelectronics
+ WM831x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm831x-hwmon.
+
config SENSORS_WM8350
tristate "Wolfson Microelectronics WM835x"
depends on MFD_WM8350
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6126257..a7e7eb7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
+obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
new file mode 100644
index 0000000..a3a9b78
--- /dev/null
+++ b/drivers/hwmon/wm831x-hwmon.c
@@ -0,0 +1,240 @@
+/*
+ * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
+ * hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+
+struct wm831x_hwmon {
+ struct wm831x *wm831x;
+ struct device *classdev;
+};
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "wm831x\n");
+}
+
+static const char *input_names[] = {
+ [WM831X_AUX_SYSVDD] = "SYSVDD",
+ [WM831X_AUX_USB] = "USB",
+ [WM831X_AUX_BKUP_BATT] = "Backup battery",
+ [WM831X_AUX_BATT] = "Battery",
+ [WM831X_AUX_WALL] = "WALL",
+ [WM831X_AUX_CHIP_TEMP] = "PMIC",
+ [WM831X_AUX_BATT_TEMP] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
+}
+
+static ssize_t show_chip_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ /* Degrees celsius = (512.18-ret) / 1.0983 */
+ ret = 512180 - (ret * 1000);
+ ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t show_batt_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ /* The conversion depends on the battery, leave to userspace but
+ * report as voltage for ABI reasons. */
+ return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM831X_VOLTAGE(id, name) \
+ static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
+ NULL, name)
+
+#define WM831X_NAMED_VOLTAGE(id, name) \
+ WM831X_VOLTAGE(id, name); \
+ static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
+ NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
+WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
+WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
+WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
+
+WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
+WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
+WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
+WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
+WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
+ WM831X_AUX_CHIP_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+ WM831X_AUX_CHIP_TEMP);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_batt_temp, NULL,
+ WM831X_AUX_BATT_TEMP);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+ WM831X_AUX_BATT_TEMP);
+
+static struct attribute *wm831x_attributes[] = {
+ &dev_attr_name.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_label.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_label.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_label.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_label.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in8_label.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+
+ NULL
+};
+
+static const struct attribute_group wm831x_attr_group = {
+ .attrs = wm831x_attributes,
+};
+
+static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_hwmon *hwmon;
+ int ret;
+
+ hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ hwmon->wm831x = wm831x;
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
+ if (ret)
+ goto err;
+
+ hwmon->classdev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon->classdev)) {
+ ret = PTR_ERR(hwmon->classdev);
+ goto err_sysfs;
+ }
+
+ platform_set_drvdata(pdev, hwmon);
+
+ return 0;
+
+err_sysfs:
+ sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+err:
+ kfree(hwmon);
+ return ret;
+}
+
+static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
+{
+ struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(hwmon->classdev);
+ sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+ kfree(hwmon);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_hwmon_driver = {
+ .probe = wm831x_hwmon_probe,
+ .remove = __devexit_p(wm831x_hwmon_remove),
+ .driver = {
+ .name = "wm831x-hwmon",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wm831x_hwmon_init(void)
+{
+ return platform_driver_register(&wm831x_hwmon_driver);
+}
+module_init(wm831x_hwmon_init);
+
+static void __exit wm831x_hwmon_exit(void)
+{
+ platform_driver_unregister(&wm831x_hwmon_driver);
+}
+module_exit(wm831x_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-hwmon");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH] Input: Add support for the WM831x ON pin
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
2009-07-27 15:38 ` Dmitry Torokhov
@ 2009-07-28 14:13 ` Mark Brown
1 sibling, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:13 UTC (permalink / raw)
To: Samuel Ortiz
Cc: linux-kernel, Dmitry Torokhov, Mark Brown, Dmitry Torokhov,
linux-input
The WM831x series of PMICs support control of initial power on
through the ON pin on the device with soft control of the pin
at other times. Represent this to userspace as KEY_POWER.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org
---
- Typo fix.
- Use schedule_delayed_work(work, 0) rather than schedule_work().
drivers/input/misc/Kconfig | 10 +++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/wm831x-on.c | 163 +++++++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/core.h | 19 +++++
4 files changed, 193 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/wm831x-on.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index cbe21bc..852941d 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -279,4 +279,14 @@ config INPUT_BFIN_ROTARY
To compile this driver as a module, choose M here: the
module will be called bfin-rotary.
+config INPUT_WM831X_ON
+ tristate "WM831X ON pin"
+ depends on MFD_WM831X
+ help
+ Support the ON pin of WM831X PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the module
+ will be called wm831x_on.
+
endif
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 79c1e9a..c97533f 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -26,4 +26,5 @@ obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o
obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON) += twl4030-pwrbutton.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
+obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o
obj-$(CONFIG_INPUT_YEALINK) += yealink.o
diff --git a/drivers/input/misc/wm831x-on.c b/drivers/input/misc/wm831x-on.c
new file mode 100644
index 0000000..ba4f5dd
--- /dev/null
+++ b/drivers/input/misc/wm831x-on.c
@@ -0,0 +1,163 @@
+/**
+ * wm831x-on.c - WM831X ON pin driver
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/wm831x/core.h>
+
+struct wm831x_on {
+ struct input_dev *dev;
+ struct delayed_work work;
+ struct wm831x *wm831x;
+};
+
+/*
+ * The chip gives us an interrupt when the ON pin is asserted but we
+ * then need to poll to see when the pin is deasserted.
+ */
+static void wm831x_poll_on(struct work_struct *work)
+{
+ struct wm831x_on *wm831x_on = container_of(work, struct wm831x_on,
+ work.work);
+ struct wm831x *wm831x = wm831x_on->wm831x;
+ int poll, ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_ON_PIN_CONTROL);
+ if (ret >= 0) {
+ poll = !(ret & WM831X_ON_PIN_STS);
+
+ input_report_key(wm831x_on->dev, KEY_POWER, poll);
+ input_sync(wm831x_on->dev);
+ } else {
+ dev_err(wm831x->dev, "Failed to read ON status: %d\n", ret);
+ poll = 1;
+ }
+
+ if (poll)
+ schedule_delayed_work(&wm831x_on->work, 100);
+}
+
+static irqreturn_t wm831x_on_irq(int irq, void *data)
+{
+ struct wm831x_on *wm831x_on = data;
+
+ schedule_delayed_work(&wm831x_on->work, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit wm831x_on_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_on *wm831x_on;
+ int irq = platform_get_irq(pdev, 0);
+ int ret;
+
+ wm831x_on = kzalloc(sizeof(struct wm831x_on), GFP_KERNEL);
+ if (!wm831x_on) {
+ dev_err(&pdev->dev, "Can't allocate data\n");
+ return -ENOMEM;
+ }
+
+ wm831x_on->wm831x = wm831x;
+ INIT_DELAYED_WORK(&wm831x_on->work, wm831x_poll_on);
+
+ wm831x_on->dev = input_allocate_device();
+ if (!wm831x_on->dev) {
+ dev_err(&pdev->dev, "Can't allocate input dev\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ wm831x_on->dev->evbit[0] = BIT_MASK(EV_KEY);
+ wm831x_on->dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ wm831x_on->dev->name = "wm831x_on";
+ wm831x_on->dev->phys = "wm831x_on/input0";
+ wm831x_on->dev->dev.parent = &pdev->dev;
+
+ ret = wm831x_request_irq(wm831x, irq, wm831x_on_irq,
+ IRQF_TRIGGER_RISING, "wm831x_on", wm831x_on);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Unable to request IRQ: %d\n", ret);
+ goto err_input_dev;
+ }
+ ret = input_register_device(wm831x_on->dev);
+ if (ret) {
+ dev_dbg(&pdev->dev, "Can't register input device: %d\n", ret);
+ goto err_irq;
+ }
+
+ platform_set_drvdata(pdev, wm831x_on);
+
+ return 0;
+
+err_irq:
+ wm831x_free_irq(wm831x, irq, NULL);
+err_input_dev:
+ input_free_device(wm831x_on->dev);
+err:
+ kfree(wm831x_on);
+ return ret;
+}
+
+static int __devexit wm831x_on_remove(struct platform_device *pdev)
+{
+ struct wm831x_on *wm831x_on = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ wm831x_free_irq(wm831x_on->wm831x, irq, wm831x_on);
+ cancel_delayed_work_sync(&wm831x_on->work);
+ input_unregister_device(wm831x_on->dev);
+ kfree(wm831x_on);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_on_driver = {
+ .probe = wm831x_on_probe,
+ .remove = __devexit_p(wm831x_on_remove),
+ .driver = {
+ .name = "wm831x-on",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wm831x_on_init(void)
+{
+ return platform_driver_register(&wm831x_on_driver);
+}
+module_init(wm831x_on_init);
+
+static void __exit wm831x_on_exit(void)
+{
+ platform_driver_unregister(&wm831x_on_driver);
+}
+module_exit(wm831x_on_exit);
+
+MODULE_ALIAS("platform:wm831x-on");
+MODULE_DESCRIPTION("WM831x ON pin");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index d7134df..91eb493 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -216,6 +216,25 @@
#define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */
#define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */
+/*
+ * R16389 (0x4005) - ON Pin Control
+ */
+#define WM831X_ON_PIN_SECACT_MASK 0x0300 /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_SHIFT 8 /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_SECACT_WIDTH 2 /* ON_PIN_SECACT - [9:8] */
+#define WM831X_ON_PIN_PRIMACT_MASK 0x0030 /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_SHIFT 4 /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_PRIMACT_WIDTH 2 /* ON_PIN_PRIMACT - [5:4] */
+#define WM831X_ON_PIN_STS 0x0008 /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_MASK 0x0008 /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_SHIFT 3 /* ON_PIN_STS */
+#define WM831X_ON_PIN_STS_WIDTH 1 /* ON_PIN_STS */
+#define WM831X_ON_PIN_TO_MASK 0x0003 /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_SHIFT 0 /* ON_PIN_TO - [1:0] */
+#define WM831X_ON_PIN_TO_WIDTH 2 /* ON_PIN_TO - [1:0] */
+
+struct regulator_dev;
+
struct wm831x {
struct mutex io_lock;
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH] RTC: Add support for RTCs on Wolfson WM831x devices
2009-07-27 13:46 ` [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices Mark Brown
@ 2009-07-28 14:18 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:18 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Alessandro Zummo, rtc-linux
The WM831x series of PMICs contain RTC functionality. The hardware
provides a 32 bit counter incrementing at 1Hz together with a per
tick interrupt and an alarm value. For simplicity the driver chooses
to define the epoch for the counter as the Unix epoch - if required
platform data can be used in future to customise this.
When powered on from a completely cold state the RTC reports that it
has not been configured - when this happens an error is returned
when attempting to read the RTC in order to avoid use of values we
know to be invalid.
The hardware also provides security features which mean that it can
ignore attempts to set the RTC time in certain circumstances, most
notably if the RTC is written to too often. These errors are detected
by verifying the written RTC value.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: rtc-linux@googlegroups.com
---
Fix some cut'n'paste errors that crept in squashing things down to
release.
drivers/rtc/Kconfig | 10 +
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-wm831x.c | 538 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 549 insertions(+), 0 deletions(-)
create mode 100644 drivers/rtc/rtc-wm831x.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 139b783..f595113 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -537,6 +537,16 @@ config RTC_DRV_V3020
This driver can also be built as a module. If so, the module
will be called rtc-v3020.
+config RTC_DRV_WM831X
+ tristate "Wolfson Microelectronics WM831x RTC"
+ depends on MFD_WM831X
+ help
+ If you say yes here you will get support for the RTC subsystem
+ of the Wolfson Microelectronics WM831X series PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called "rtc-wm831x".
+
config RTC_DRV_WM8350
tristate "Wolfson Microelectronics WM8350 RTC"
depends on MFD_WM8350
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2a565f8..61d5600 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -76,6 +76,7 @@ obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o
obj-$(CONFIG_RTC_DRV_TX4939) += rtc-tx4939.o
obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o
obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o
+obj-$(CONFIG_RTC_DRV_WM831X) += rtc-wm831x.o
obj-$(CONFIG_RTC_DRV_WM8350) += rtc-wm8350.o
obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
obj-$(CONFIG_RTC_DRV_PCF50633) += rtc-pcf50633.o
diff --git a/drivers/rtc/rtc-wm831x.c b/drivers/rtc/rtc-wm831x.c
new file mode 100644
index 0000000..99e7845
--- /dev/null
+++ b/drivers/rtc/rtc-wm831x.c
@@ -0,0 +1,538 @@
+/*
+ * Real Time Clock driver for Wolfson Microelectronics WM831x
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/completion.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+
+/*
+ * R16416 (0x4020) - RTC Write Counter
+ */
+#define WM831X_RTC_WR_CNT_MASK 0xFFFF /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_SHIFT 0 /* RTC_WR_CNT - [15:0] */
+#define WM831X_RTC_WR_CNT_WIDTH 16 /* RTC_WR_CNT - [15:0] */
+
+/*
+ * R16417 (0x4021) - RTC Time 1
+ */
+#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */
+
+/*
+ * R16418 (0x4022) - RTC Time 2
+ */
+#define WM831X_RTC_TIME_MASK 0xFFFF /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_SHIFT 0 /* RTC_TIME - [15:0] */
+#define WM831X_RTC_TIME_WIDTH 16 /* RTC_TIME - [15:0] */
+
+/*
+ * R16419 (0x4023) - RTC Alarm 1
+ */
+#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */
+
+/*
+ * R16420 (0x4024) - RTC Alarm 2
+ */
+#define WM831X_RTC_ALM_MASK 0xFFFF /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_SHIFT 0 /* RTC_ALM - [15:0] */
+#define WM831X_RTC_ALM_WIDTH 16 /* RTC_ALM - [15:0] */
+
+/*
+ * R16421 (0x4025) - RTC Control
+ */
+#define WM831X_RTC_VALID 0x8000 /* RTC_VALID */
+#define WM831X_RTC_VALID_MASK 0x8000 /* RTC_VALID */
+#define WM831X_RTC_VALID_SHIFT 15 /* RTC_VALID */
+#define WM831X_RTC_VALID_WIDTH 1 /* RTC_VALID */
+#define WM831X_RTC_SYNC_BUSY 0x4000 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_MASK 0x4000 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_SHIFT 14 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_SYNC_BUSY_WIDTH 1 /* RTC_SYNC_BUSY */
+#define WM831X_RTC_ALM_ENA 0x0400 /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_MASK 0x0400 /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_SHIFT 10 /* RTC_ALM_ENA */
+#define WM831X_RTC_ALM_ENA_WIDTH 1 /* RTC_ALM_ENA */
+#define WM831X_RTC_PINT_FREQ_MASK 0x0070 /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_SHIFT 4 /* RTC_PINT_FREQ - [6:4] */
+#define WM831X_RTC_PINT_FREQ_WIDTH 3 /* RTC_PINT_FREQ - [6:4] */
+
+/*
+ * R16422 (0x4026) - RTC Trim
+ */
+#define WM831X_RTC_TRIM_MASK 0x03FF /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_SHIFT 0 /* RTC_TRIM - [9:0] */
+#define WM831X_RTC_TRIM_WIDTH 10 /* RTC_TRIM - [9:0] */
+
+#define WM831X_SET_TIME_RETRIES 5
+#define WM831X_GET_TIME_RETRIES 5
+
+struct wm831x_rtc {
+ struct wm831x *wm831x;
+ struct rtc_device *rtc;
+ int alarm_enabled;
+ int per_irq;
+};
+
+/*
+ * Read current time and date in RTC
+ */
+static int wm831x_rtc_readtime(struct device *dev, struct rtc_time *tm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ struct wm831x *wm831x = wm831x_rtc->wm831x;
+ u16 time1[2], time2[2];
+ int ret;
+ int count = 0;
+
+ /* Has the RTC been programmed? */
+ ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read RTC control: %d\n", ret);
+ return ret;
+ }
+ if (!(ret & WM831X_RTC_VALID)) {
+ dev_dbg(dev, "RTC not yet configured\n");
+ return -EINVAL;
+ }
+
+ /* Read twice to make sure we don't read a corrupt, partially
+ * incremented, value.
+ */
+ do {
+ ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+ 2, time1);
+ if (ret != 0)
+ continue;
+
+ ret = wm831x_bulk_read(wm831x, WM831X_RTC_TIME_1,
+ 2, time2);
+ if (ret != 0)
+ continue;
+
+ if (memcmp(time1, time2, sizeof(time1)) == 0) {
+ u32 time = (time1[0] << 16) | time1[1];
+
+ rtc_time_to_tm(time, tm);
+ return 0;
+ }
+
+ } while (++count < WM831X_GET_TIME_RETRIES);
+
+ dev_err(dev, "Timed out reading current time\n");
+
+ return -EIO;
+}
+
+/*
+ * Set current time and date in RTC
+ */
+static int wm831x_rtc_settime(struct device *dev, struct rtc_time *tm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ struct wm831x *wm831x = wm831x_rtc->wm831x;
+ struct rtc_time new_tm;
+ unsigned long time, new_time;
+ int ret;
+ int count = 0;
+
+ ret = rtc_tm_to_time(tm, &time);
+ if (ret < 0) {
+ dev_err(dev, "Failed to convert time: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_1,
+ (time >> 16) & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write TIME_1: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_TIME_2, time & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write TIME_2: %d\n", ret);
+ return ret;
+ }
+
+ /* Wait for the update to complete - should happen first time
+ * round but be conservative.
+ */
+ do {
+ msleep(1);
+
+ ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0)
+ ret = WM831X_RTC_SYNC_BUSY;
+ } while (!(ret & WM831X_RTC_SYNC_BUSY) &&
+ ++count < WM831X_SET_TIME_RETRIES);
+
+ if (ret & WM831X_RTC_SYNC_BUSY) {
+ dev_err(dev, "Timed out writing RTC update\n");
+ return -EIO;
+ }
+
+ /* Check that the update was accepted; security features may
+ * have caused the update to be ignored.
+ */
+ ret = wm831x_rtc_readtime(dev, &new_tm);
+ if (ret < 0)
+ return ret;
+
+ ret = rtc_tm_to_time(&new_tm, &new_time);
+ if (ret < 0) {
+ dev_err(dev, "Failed to convert time: %d\n", ret);
+ return ret;
+ }
+
+ /* Allow a second of change in case of tick */
+ if (new_time - time > 1) {
+ dev_err(dev, "RTC update not permitted by hardware\n");
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+/*
+ * Read alarm time and date in RTC
+ */
+static int wm831x_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ int ret;
+ u16 data[2];
+ u32 time;
+
+ ret = wm831x_bulk_read(wm831x_rtc->wm831x, WM831X_RTC_ALARM_1,
+ 2, data);
+ if (ret != 0) {
+ dev_err(dev, "Failed to read alarm time: %d\n", ret);
+ return ret;
+ }
+
+ time = (data[0] << 16) | data[1];
+
+ rtc_time_to_tm(time, &alrm->time);
+
+ ret = wm831x_reg_read(wm831x_rtc->wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0) {
+ dev_err(dev, "Failed to read RTC control: %d\n", ret);
+ return ret;
+ }
+
+ if (ret & WM831X_RTC_ALM_ENA)
+ alrm->enabled = 1;
+ else
+ alrm->enabled = 0;
+
+ return 0;
+}
+
+static int wm831x_rtc_stop_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+ wm831x_rtc->alarm_enabled = 0;
+
+ return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, 0);
+}
+
+static int wm831x_rtc_start_alarm(struct wm831x_rtc *wm831x_rtc)
+{
+ wm831x_rtc->alarm_enabled = 1;
+
+ return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, WM831X_RTC_ALM_ENA);
+}
+
+static int wm831x_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ struct wm831x *wm831x = wm831x_rtc->wm831x;
+ int ret;
+ unsigned long time;
+
+ ret = rtc_tm_to_time(&alrm->time, &time);
+ if (ret < 0) {
+ dev_err(dev, "Failed to convert time: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_rtc_stop_alarm(wm831x_rtc);
+ if (ret < 0) {
+ dev_err(dev, "Failed to stop alarm: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_1,
+ (time >> 16) & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write ALARM_1: %d\n", ret);
+ return ret;
+ }
+
+ ret = wm831x_reg_write(wm831x, WM831X_RTC_ALARM_2, time & 0xffff);
+ if (ret < 0) {
+ dev_err(dev, "Failed to write ALARM_2: %d\n", ret);
+ return ret;
+ }
+
+ if (alrm->enabled) {
+ ret = wm831x_rtc_start_alarm(wm831x_rtc);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start alarm: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int wm831x_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+
+ if (enabled)
+ return wm831x_rtc_start_alarm(wm831x_rtc);
+ else
+ return wm831x_rtc_stop_alarm(wm831x_rtc);
+}
+
+static int wm831x_rtc_update_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(dev);
+ int val;
+
+ if (enabled)
+ val = 1 << WM831X_RTC_PINT_FREQ_SHIFT;
+ else
+ val = 0;
+
+ return wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_PINT_FREQ_MASK, val);
+}
+
+static irqreturn_t wm831x_alm_irq(int irq, void *data)
+{
+ struct wm831x_rtc *wm831x_rtc = data;
+
+ rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_per_irq(int irq, void *data)
+{
+ struct wm831x_rtc *wm831x_rtc = data;
+
+ rtc_update_irq(wm831x_rtc->rtc, 1, RTC_IRQF | RTC_UF);
+
+ return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops wm831x_rtc_ops = {
+ .read_time = wm831x_rtc_readtime,
+ .set_time = wm831x_rtc_settime,
+ .read_alarm = wm831x_rtc_readalarm,
+ .set_alarm = wm831x_rtc_setalarm,
+ .alarm_irq_enable = wm831x_rtc_alarm_irq_enable,
+ .update_irq_enable = wm831x_rtc_update_irq_enable,
+};
+
+#ifdef CONFIG_PM
+/* Turn off the alarm if it should not be a wake source. */
+static int wm831x_rtc_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+ int ret, enable;
+
+ if (wm831x_rtc->alarm_enabled && device_may_wakeup(&pdev->dev))
+ enable = WM831X_RTC_ALM_ENA;
+ else
+ enable = 0;
+
+ ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, enable);
+ if (ret != 0)
+ dev_err(&pdev->dev, "Failed to update RTC alarm: %d\n", ret);
+
+ return 0;
+}
+
+/* Enable the alarm if it should be enabled (in case it was disabled to
+ * prevent use as a wake source).
+ */
+static int wm831x_rtc_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+ int ret;
+
+ if (wm831x_rtc->alarm_enabled) {
+ ret = wm831x_rtc_start_alarm(wm831x_rtc);
+ if (ret != 0)
+ dev_err(&pdev->dev,
+ "Failed to restart RTC alarm: %d\n", ret);
+ }
+
+ return 0;
+}
+
+/* Unconditionally disable the alarm */
+static int wm831x_rtc_freeze(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct wm831x_rtc *wm831x_rtc = dev_get_drvdata(&pdev->dev);
+ int ret;
+
+ ret = wm831x_set_bits(wm831x_rtc->wm831x, WM831X_RTC_CONTROL,
+ WM831X_RTC_ALM_ENA, 0);
+ if (ret != 0)
+ dev_err(&pdev->dev, "Failed to stop RTC alarm: %d\n", ret);
+
+ return 0;
+}
+#else
+#define wm831x_rtc_suspend NULL
+#define wm831x_rtc_resume NULL
+#define wm831x_rtc_freeze NULL
+#endif
+
+static int wm831x_rtc_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_rtc *wm831x_rtc;
+ int per_irq = platform_get_irq_byname(pdev, "PER");
+ int alm_irq = platform_get_irq_byname(pdev, "ALM");
+ int ret = 0;
+
+ wm831x_rtc = kzalloc(sizeof(*wm831x_rtc), GFP_KERNEL);
+ if (wm831x_rtc == NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, wm831x_rtc);
+ wm831x_rtc->wm831x = wm831x;
+ wm831x_rtc->per_irq = per_irq;
+
+ ret = wm831x_reg_read(wm831x, WM831X_RTC_CONTROL);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to read RTC control: %d\n", ret);
+ goto err;
+ }
+ if (ret & WM831X_RTC_ALM_ENA)
+ wm831x_rtc->alarm_enabled = 1;
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ wm831x_rtc->rtc = rtc_device_register("wm831x", &pdev->dev,
+ &wm831x_rtc_ops, THIS_MODULE);
+ if (IS_ERR(wm831x_rtc->rtc)) {
+ ret = PTR_ERR(wm831x_rtc->rtc);
+ dev_err(&pdev->dev, "Failed to register RTC: %d\n", ret);
+ goto err;
+ }
+
+ ret = wm831x_request_irq(wm831x, per_irq, wm831x_per_irq,
+ IRQF_TRIGGER_RISING, "wm831x_rtc_per",
+ wm831x_rtc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request periodic IRQ %d: %d\n",
+ per_irq, ret);
+ goto err_rtc;
+ }
+
+ ret = wm831x_request_irq(wm831x, alm_irq, wm831x_alm_irq,
+ IRQF_TRIGGER_RISING, "wm831x_rtc_alm",
+ wm831x_rtc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+ alm_irq, ret);
+ goto err_per;
+ }
+
+ return 0;
+
+err_per:
+ wm831x_free_irq(wm831x, per_irq, wm831x_rtc);
+err_rtc:
+ rtc_device_unregister(wm831x_rtc->rtc);
+err:
+ kfree(wm831x_rtc);
+ return ret;
+}
+
+static int __devexit wm831x_rtc_remove(struct platform_device *pdev)
+{
+ struct wm831x_rtc *wm831x_rtc = platform_get_drvdata(pdev);
+ int per_irq = platform_get_irq(pdev, 0);
+ int alm_irq = platform_get_irq(pdev, 1);
+
+ wm831x_free_irq(wm831x_rtc->wm831x, alm_irq, wm831x_rtc);
+ wm831x_free_irq(wm831x_rtc->wm831x, per_irq, wm831x_rtc);
+ rtc_device_unregister(wm831x_rtc->rtc);
+ kfree(wm831x_rtc);
+
+ return 0;
+}
+
+static struct dev_pm_ops wm831x_rtc_pm_ops = {
+ .suspend = wm831x_rtc_suspend,
+ .resume = wm831x_rtc_resume,
+
+ .freeze = wm831x_rtc_freeze,
+ .thaw = wm831x_rtc_resume,
+ .restore = wm831x_rtc_resume,
+
+ .poweroff = wm831x_rtc_suspend,
+};
+
+static struct platform_driver wm831x_rtc_driver = {
+ .probe = wm831x_rtc_probe,
+ .remove = __devexit_p(wm831x_rtc_remove),
+ .driver = {
+ .name = "wm831x-rtc",
+ .pm = &wm831x_rtc_pm_ops,
+ },
+};
+
+static int __init wm831x_rtc_init(void)
+{
+ return platform_driver_register(&wm831x_rtc_driver);
+}
+module_init(wm831x_rtc_init);
+
+static void __exit wm831x_rtc_exit(void)
+{
+ platform_driver_unregister(&wm831x_rtc_driver);
+}
+module_exit(wm831x_rtc_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("RTC driver for the WM831x series PMICs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-rtc");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 17/23] regulator: Add WM831x DC-DC buck convertor support
2009-07-27 13:46 ` [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support Mark Brown
@ 2009-07-28 14:21 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:21 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of devices all have 3 DC-DC buck convertors. This
driver implements software control for these regulators via the
regulator API. Use with split hardware/software control of individual
regulators is not supported, though regulators not controlled by
software may be controlled via the hardware control interfaces.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
Support missing platform data for the main chip.
drivers/regulator/Kconfig | 7 +
drivers/regulator/Makefile | 1 +
drivers/regulator/wm831x-dcdc.c | 643 ++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/regulator.h | 571 ++++++++++++++++++++++++++++++
4 files changed, 1222 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/wm831x-dcdc.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index da7483e..38ea5dc 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -82,6 +82,13 @@ config REGULATOR_TWL4030
This driver supports the voltage regulators provided by
this family of companion chips.
+config REGULATOR_WM831X
+ tristate "Wolfson Microelcronics WM831x PMIC regulators"
+ depends on MFD_WM831X
+ help
+ Support the voltage and current regulators of the WM831x series
+ of PMIC devices.
+
config REGULATOR_WM8350
tristate "Wolfson Microelectroncis WM8350 AudioPlus PMIC"
depends on MFD_WM8350
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 3a9748f..b1d2b82 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
new file mode 100644
index 0000000..fa5126e
--- /dev/null
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -0,0 +1,643 @@
+/*
+ * wm831x-dcdc.c -- DC-DC buck convertor driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_BUCKV_MAX_SELECTOR 0x68
+#define WM831X_BUCKP_MAX_SELECTOR 0x66
+
+#define WM831X_DCDC_MODE_FAST 0
+#define WM831X_DCDC_MODE_NORMAL 1
+#define WM831X_DCDC_MODE_IDLE 2
+#define WM831X_DCDC_MODE_STANDBY 3
+
+#define WM831X_DCDC_MAX_NAME 6
+
+/* Register offsets in control block */
+#define WM831X_DCDC_CONTROL_1 0
+#define WM831X_DCDC_CONTROL_2 1
+#define WM831X_DCDC_ON_CONFIG 2
+#define WM831X_DCDC_SLEEP_CONTROL 3
+
+/*
+ * Shared
+ */
+
+struct wm831x_dcdc {
+ char name[WM831X_DCDC_MAX_NAME];
+ struct regulator_desc desc;
+ int base;
+ struct wm831x *wm831x;
+ struct regulator_dev *regulator;
+};
+
+static int wm831x_dcdc_is_enabled(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int reg;
+
+ reg = wm831x_reg_read(wm831x, WM831X_DCDC_ENABLE);
+ if (reg < 0)
+ return reg;
+
+ if (reg & mask)
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_dcdc_enable(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, mask);
+}
+
+static int wm831x_dcdc_disable(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, mask, 0);
+}
+
+static unsigned int wm831x_dcdc_get_mode(struct regulator_dev *rdev)
+
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ val = (val & WM831X_DC1_ON_MODE_MASK) >> WM831X_DC1_ON_MODE_SHIFT;
+
+ switch (val) {
+ case WM831X_DCDC_MODE_FAST:
+ return REGULATOR_MODE_FAST;
+ case WM831X_DCDC_MODE_NORMAL:
+ return REGULATOR_MODE_NORMAL;
+ case WM831X_DCDC_MODE_STANDBY:
+ return REGULATOR_MODE_STANDBY;
+ case WM831X_DCDC_MODE_IDLE:
+ return REGULATOR_MODE_IDLE;
+ default:
+ BUG();
+ }
+}
+
+static int wm831x_dcdc_set_mode_int(struct wm831x *wm831x, int reg,
+ unsigned int mode)
+{
+ int val;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = WM831X_DCDC_MODE_FAST;
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = WM831X_DCDC_MODE_NORMAL;
+ break;
+ case REGULATOR_MODE_STANDBY:
+ val = WM831X_DCDC_MODE_STANDBY;
+ break;
+ case REGULATOR_MODE_IDLE:
+ val = WM831X_DCDC_MODE_IDLE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_MODE_MASK,
+ val << WM831X_DC1_ON_MODE_SHIFT);
+}
+
+static int wm831x_dcdc_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+ return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+ return wm831x_dcdc_set_mode_int(wm831x, reg, mode);
+}
+
+static int wm831x_dcdc_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int ret;
+
+ /* First, check for errors */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & (1 << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+
+ /* DCDC1 and DCDC2 can additionally detect high voltage/current */
+ if (rdev_get_id(rdev) < 2) {
+ if (ret & (WM831X_DC1_OV_STS << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d over voltage\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+
+ if (ret & (WM831X_DC1_HC_STS << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d over current\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+ }
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+ if (ret < 0)
+ return ret;
+ if (!(ret & (1 << rdev_get_id(rdev))))
+ return REGULATOR_STATUS_OFF;
+
+ /* TODO: When we handle hardware control modes so we can report the
+ * current mode. */
+ return REGULATOR_STATUS_ON;
+}
+
+static irqreturn_t wm831x_dcdc_uv_irq(int irq, void *data)
+{
+ struct wm831x_dcdc *dcdc = data;
+
+ regulator_notifier_call_chain(dcdc->regulator,
+ REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_dcdc_oc_irq(int irq, void *data)
+{
+ struct wm831x_dcdc *dcdc = data;
+
+ regulator_notifier_call_chain(dcdc->regulator,
+ REGULATOR_EVENT_OVER_CURRENT,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * BUCKV specifics
+ */
+
+static int wm831x_buckv_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ if (selector <= 0x8)
+ return 600000;
+ if (selector <= WM831X_BUCKV_MAX_SELECTOR)
+ return 600000 + ((selector - 0x8) * 12500);
+ return -EINVAL;
+}
+
+static int wm831x_buckv_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 vsel;
+
+ if (min_uV < 600000)
+ vsel = 0;
+ else if (min_uV <= 1800000)
+ vsel = ((min_uV - 600000) / 12500) + 8;
+ else
+ return -EINVAL;
+
+ if (wm831x_buckv_list_voltage(rdev, vsel) > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckv_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+ return wm831x_buckv_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckv_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+ return wm831x_buckv_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckv_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ return wm831x_buckv_list_voltage(rdev, val & WM831X_DC1_ON_VSEL_MASK);
+}
+
+/* Current limit options */
+static u16 wm831x_dcdc_ilim[] = {
+ 125, 250, 375, 500, 625, 750, 875, 1000
+};
+
+static int wm831x_buckv_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_dcdc_ilim); i++) {
+ if (max_uA <= wm831x_dcdc_ilim[i])
+ break;
+ }
+ if (i == ARRAY_SIZE(wm831x_dcdc_ilim))
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC1_HC_THR_MASK, i);
+}
+
+static int wm831x_buckv_get_current_limit(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_CONTROL_2;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ return wm831x_dcdc_ilim[val & WM831X_DC1_HC_THR_MASK];
+}
+
+static struct regulator_ops wm831x_buckv_ops = {
+ .set_voltage = wm831x_buckv_set_voltage,
+ .get_voltage = wm831x_buckv_get_voltage,
+ .list_voltage = wm831x_buckv_list_voltage,
+ .set_suspend_voltage = wm831x_buckv_set_suspend_voltage,
+ .set_current_limit = wm831x_buckv_set_current_limit,
+ .get_current_limit = wm831x_buckv_get_current_limit,
+
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+ .get_status = wm831x_dcdc_get_status,
+ .get_mode = wm831x_dcdc_get_mode,
+ .set_mode = wm831x_dcdc_set_mode,
+ .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckv_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+ struct wm831x_dcdc *dcdc;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+ if (pdata == NULL || pdata->dcdc[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ dcdc->base = res->start;
+
+ snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.n_voltages = WM831X_BUCKV_MAX_SELECTOR + 1;
+ dcdc->desc.ops = &wm831x_buckv_ops;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->dcdc[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ irq = platform_get_irq_byname(pdev, "HC");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_oc_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request HC IRQ %d: %d\n",
+ irq, ret);
+ goto err_uv;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err_uv:
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+err_regulator:
+ regulator_unregister(dcdc->regulator);
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_buckv_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "HC"), dcdc);
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_buckv_driver = {
+ .probe = wm831x_buckv_probe,
+ .remove = __devexit_p(wm831x_buckv_remove),
+ .driver = {
+ .name = "wm831x-buckv",
+ },
+};
+
+/*
+ * BUCKP specifics
+ */
+
+static int wm831x_buckp_list_voltage(struct regulator_dev *rdev,
+ unsigned selector)
+{
+ if (selector <= WM831X_BUCKP_MAX_SELECTOR)
+ return 850000 + (selector * 25000);
+ else
+ return -EINVAL;
+}
+
+static int wm831x_buckp_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 vsel;
+
+ if (min_uV <= 34000000)
+ vsel = (min_uV - 850000) / 25000;
+ else
+ return -EINVAL;
+
+ if (wm831x_buckp_list_voltage(rdev, vsel) > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_DC3_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_buckp_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+
+ return wm831x_buckp_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_buckp_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ u16 reg = dcdc->base + WM831X_DCDC_SLEEP_CONTROL;
+
+ return wm831x_buckp_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_buckp_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ u16 reg = dcdc->base + WM831X_DCDC_ON_CONFIG;
+ int val;
+
+ val = wm831x_reg_read(wm831x, reg);
+ if (val < 0)
+ return val;
+
+ return wm831x_buckp_list_voltage(rdev, val & WM831X_DC3_ON_VSEL_MASK);
+}
+
+static struct regulator_ops wm831x_buckp_ops = {
+ .set_voltage = wm831x_buckp_set_voltage,
+ .get_voltage = wm831x_buckp_get_voltage,
+ .list_voltage = wm831x_buckp_list_voltage,
+ .set_suspend_voltage = wm831x_buckp_set_suspend_voltage,
+
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+ .get_status = wm831x_dcdc_get_status,
+ .get_mode = wm831x_dcdc_get_mode,
+ .set_mode = wm831x_dcdc_set_mode,
+ .set_suspend_mode = wm831x_dcdc_set_suspend_mode,
+};
+
+static __devinit int wm831x_buckp_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+ struct wm831x_dcdc *dcdc;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+ if (pdata == NULL || pdata->dcdc[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ dcdc->base = res->start;
+
+ snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.n_voltages = WM831X_BUCKP_MAX_SELECTOR + 1;
+ dcdc->desc.ops = &wm831x_buckp_ops;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->dcdc[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(dcdc->regulator);
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_buckp_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_buckp_driver = {
+ .probe = wm831x_buckp_probe,
+ .remove = __devexit_p(wm831x_buckp_remove),
+ .driver = {
+ .name = "wm831x-buckp",
+ },
+};
+
+static int __init wm831x_dcdc_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&wm831x_buckv_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x BUCKV driver: %d\n", ret);
+
+ ret = platform_driver_register(&wm831x_buckp_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+
+ return 0;
+}
+subsys_initcall(wm831x_dcdc_init);
+
+static void __exit wm831x_dcdc_exit(void)
+{
+ platform_driver_unregister(&wm831x_buckp_driver);
+ platform_driver_unregister(&wm831x_buckv_driver);
+}
+module_exit(wm831x_dcdc_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x DC-DC convertor driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-buckv");
+MODULE_ALIAS("platform:wm831x-buckp");
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
index b5d58fb..c74d6aa 100644
--- a/include/linux/mfd/wm831x/regulator.h
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -15,6 +15,577 @@
#ifndef __MFD_WM831X_REGULATOR_H__
#define __MFD_WM831X_REGULATOR_H__
+/*
+ * R16462 (0x404E) - Current Sink 1
+ */
+#define WM831X_CS1_ENA 0x8000 /* CS1_ENA */
+#define WM831X_CS1_ENA_MASK 0x8000 /* CS1_ENA */
+#define WM831X_CS1_ENA_SHIFT 15 /* CS1_ENA */
+#define WM831X_CS1_ENA_WIDTH 1 /* CS1_ENA */
+#define WM831X_CS1_DRIVE 0x4000 /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_MASK 0x4000 /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_SHIFT 14 /* CS1_DRIVE */
+#define WM831X_CS1_DRIVE_WIDTH 1 /* CS1_DRIVE */
+#define WM831X_CS1_SLPENA 0x1000 /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_MASK 0x1000 /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_SHIFT 12 /* CS1_SLPENA */
+#define WM831X_CS1_SLPENA_WIDTH 1 /* CS1_SLPENA */
+#define WM831X_CS1_OFF_RAMP_MASK 0x0C00 /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_SHIFT 10 /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_OFF_RAMP_WIDTH 2 /* CS1_OFF_RAMP - [11:10] */
+#define WM831X_CS1_ON_RAMP_MASK 0x0300 /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_SHIFT 8 /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ON_RAMP_WIDTH 2 /* CS1_ON_RAMP - [9:8] */
+#define WM831X_CS1_ISEL_MASK 0x003F /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_SHIFT 0 /* CS1_ISEL - [5:0] */
+#define WM831X_CS1_ISEL_WIDTH 6 /* CS1_ISEL - [5:0] */
+
+/*
+ * R16463 (0x404F) - Current Sink 2
+ */
+#define WM831X_CS2_ENA 0x8000 /* CS2_ENA */
+#define WM831X_CS2_ENA_MASK 0x8000 /* CS2_ENA */
+#define WM831X_CS2_ENA_SHIFT 15 /* CS2_ENA */
+#define WM831X_CS2_ENA_WIDTH 1 /* CS2_ENA */
+#define WM831X_CS2_DRIVE 0x4000 /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_MASK 0x4000 /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_SHIFT 14 /* CS2_DRIVE */
+#define WM831X_CS2_DRIVE_WIDTH 1 /* CS2_DRIVE */
+#define WM831X_CS2_SLPENA 0x1000 /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_MASK 0x1000 /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_SHIFT 12 /* CS2_SLPENA */
+#define WM831X_CS2_SLPENA_WIDTH 1 /* CS2_SLPENA */
+#define WM831X_CS2_OFF_RAMP_MASK 0x0C00 /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_SHIFT 10 /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_OFF_RAMP_WIDTH 2 /* CS2_OFF_RAMP - [11:10] */
+#define WM831X_CS2_ON_RAMP_MASK 0x0300 /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_SHIFT 8 /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ON_RAMP_WIDTH 2 /* CS2_ON_RAMP - [9:8] */
+#define WM831X_CS2_ISEL_MASK 0x003F /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_SHIFT 0 /* CS2_ISEL - [5:0] */
+#define WM831X_CS2_ISEL_WIDTH 6 /* CS2_ISEL - [5:0] */
+
+/*
+ * R16464 (0x4050) - DCDC Enable
+ */
+#define WM831X_EPE2_ENA 0x0080 /* EPE2_ENA */
+#define WM831X_EPE2_ENA_MASK 0x0080 /* EPE2_ENA */
+#define WM831X_EPE2_ENA_SHIFT 7 /* EPE2_ENA */
+#define WM831X_EPE2_ENA_WIDTH 1 /* EPE2_ENA */
+#define WM831X_EPE1_ENA 0x0040 /* EPE1_ENA */
+#define WM831X_EPE1_ENA_MASK 0x0040 /* EPE1_ENA */
+#define WM831X_EPE1_ENA_SHIFT 6 /* EPE1_ENA */
+#define WM831X_EPE1_ENA_WIDTH 1 /* EPE1_ENA */
+#define WM831X_DC4_ENA 0x0008 /* DC4_ENA */
+#define WM831X_DC4_ENA_MASK 0x0008 /* DC4_ENA */
+#define WM831X_DC4_ENA_SHIFT 3 /* DC4_ENA */
+#define WM831X_DC4_ENA_WIDTH 1 /* DC4_ENA */
+#define WM831X_DC3_ENA 0x0004 /* DC3_ENA */
+#define WM831X_DC3_ENA_MASK 0x0004 /* DC3_ENA */
+#define WM831X_DC3_ENA_SHIFT 2 /* DC3_ENA */
+#define WM831X_DC3_ENA_WIDTH 1 /* DC3_ENA */
+#define WM831X_DC2_ENA 0x0002 /* DC2_ENA */
+#define WM831X_DC2_ENA_MASK 0x0002 /* DC2_ENA */
+#define WM831X_DC2_ENA_SHIFT 1 /* DC2_ENA */
+#define WM831X_DC2_ENA_WIDTH 1 /* DC2_ENA */
+#define WM831X_DC1_ENA 0x0001 /* DC1_ENA */
+#define WM831X_DC1_ENA_MASK 0x0001 /* DC1_ENA */
+#define WM831X_DC1_ENA_SHIFT 0 /* DC1_ENA */
+#define WM831X_DC1_ENA_WIDTH 1 /* DC1_ENA */
+
+/*
+ * R16465 (0x4051) - LDO Enable
+ */
+#define WM831X_LDO11_ENA 0x0400 /* LDO11_ENA */
+#define WM831X_LDO11_ENA_MASK 0x0400 /* LDO11_ENA */
+#define WM831X_LDO11_ENA_SHIFT 10 /* LDO11_ENA */
+#define WM831X_LDO11_ENA_WIDTH 1 /* LDO11_ENA */
+#define WM831X_LDO10_ENA 0x0200 /* LDO10_ENA */
+#define WM831X_LDO10_ENA_MASK 0x0200 /* LDO10_ENA */
+#define WM831X_LDO10_ENA_SHIFT 9 /* LDO10_ENA */
+#define WM831X_LDO10_ENA_WIDTH 1 /* LDO10_ENA */
+#define WM831X_LDO9_ENA 0x0100 /* LDO9_ENA */
+#define WM831X_LDO9_ENA_MASK 0x0100 /* LDO9_ENA */
+#define WM831X_LDO9_ENA_SHIFT 8 /* LDO9_ENA */
+#define WM831X_LDO9_ENA_WIDTH 1 /* LDO9_ENA */
+#define WM831X_LDO8_ENA 0x0080 /* LDO8_ENA */
+#define WM831X_LDO8_ENA_MASK 0x0080 /* LDO8_ENA */
+#define WM831X_LDO8_ENA_SHIFT 7 /* LDO8_ENA */
+#define WM831X_LDO8_ENA_WIDTH 1 /* LDO8_ENA */
+#define WM831X_LDO7_ENA 0x0040 /* LDO7_ENA */
+#define WM831X_LDO7_ENA_MASK 0x0040 /* LDO7_ENA */
+#define WM831X_LDO7_ENA_SHIFT 6 /* LDO7_ENA */
+#define WM831X_LDO7_ENA_WIDTH 1 /* LDO7_ENA */
+#define WM831X_LDO6_ENA 0x0020 /* LDO6_ENA */
+#define WM831X_LDO6_ENA_MASK 0x0020 /* LDO6_ENA */
+#define WM831X_LDO6_ENA_SHIFT 5 /* LDO6_ENA */
+#define WM831X_LDO6_ENA_WIDTH 1 /* LDO6_ENA */
+#define WM831X_LDO5_ENA 0x0010 /* LDO5_ENA */
+#define WM831X_LDO5_ENA_MASK 0x0010 /* LDO5_ENA */
+#define WM831X_LDO5_ENA_SHIFT 4 /* LDO5_ENA */
+#define WM831X_LDO5_ENA_WIDTH 1 /* LDO5_ENA */
+#define WM831X_LDO4_ENA 0x0008 /* LDO4_ENA */
+#define WM831X_LDO4_ENA_MASK 0x0008 /* LDO4_ENA */
+#define WM831X_LDO4_ENA_SHIFT 3 /* LDO4_ENA */
+#define WM831X_LDO4_ENA_WIDTH 1 /* LDO4_ENA */
+#define WM831X_LDO3_ENA 0x0004 /* LDO3_ENA */
+#define WM831X_LDO3_ENA_MASK 0x0004 /* LDO3_ENA */
+#define WM831X_LDO3_ENA_SHIFT 2 /* LDO3_ENA */
+#define WM831X_LDO3_ENA_WIDTH 1 /* LDO3_ENA */
+#define WM831X_LDO2_ENA 0x0002 /* LDO2_ENA */
+#define WM831X_LDO2_ENA_MASK 0x0002 /* LDO2_ENA */
+#define WM831X_LDO2_ENA_SHIFT 1 /* LDO2_ENA */
+#define WM831X_LDO2_ENA_WIDTH 1 /* LDO2_ENA */
+#define WM831X_LDO1_ENA 0x0001 /* LDO1_ENA */
+#define WM831X_LDO1_ENA_MASK 0x0001 /* LDO1_ENA */
+#define WM831X_LDO1_ENA_SHIFT 0 /* LDO1_ENA */
+#define WM831X_LDO1_ENA_WIDTH 1 /* LDO1_ENA */
+
+/*
+ * R16466 (0x4052) - DCDC Status
+ */
+#define WM831X_EPE2_STS 0x0080 /* EPE2_STS */
+#define WM831X_EPE2_STS_MASK 0x0080 /* EPE2_STS */
+#define WM831X_EPE2_STS_SHIFT 7 /* EPE2_STS */
+#define WM831X_EPE2_STS_WIDTH 1 /* EPE2_STS */
+#define WM831X_EPE1_STS 0x0040 /* EPE1_STS */
+#define WM831X_EPE1_STS_MASK 0x0040 /* EPE1_STS */
+#define WM831X_EPE1_STS_SHIFT 6 /* EPE1_STS */
+#define WM831X_EPE1_STS_WIDTH 1 /* EPE1_STS */
+#define WM831X_DC4_STS 0x0008 /* DC4_STS */
+#define WM831X_DC4_STS_MASK 0x0008 /* DC4_STS */
+#define WM831X_DC4_STS_SHIFT 3 /* DC4_STS */
+#define WM831X_DC4_STS_WIDTH 1 /* DC4_STS */
+#define WM831X_DC3_STS 0x0004 /* DC3_STS */
+#define WM831X_DC3_STS_MASK 0x0004 /* DC3_STS */
+#define WM831X_DC3_STS_SHIFT 2 /* DC3_STS */
+#define WM831X_DC3_STS_WIDTH 1 /* DC3_STS */
+#define WM831X_DC2_STS 0x0002 /* DC2_STS */
+#define WM831X_DC2_STS_MASK 0x0002 /* DC2_STS */
+#define WM831X_DC2_STS_SHIFT 1 /* DC2_STS */
+#define WM831X_DC2_STS_WIDTH 1 /* DC2_STS */
+#define WM831X_DC1_STS 0x0001 /* DC1_STS */
+#define WM831X_DC1_STS_MASK 0x0001 /* DC1_STS */
+#define WM831X_DC1_STS_SHIFT 0 /* DC1_STS */
+#define WM831X_DC1_STS_WIDTH 1 /* DC1_STS */
+
+/*
+ * R16467 (0x4053) - LDO Status
+ */
+#define WM831X_LDO11_STS 0x0400 /* LDO11_STS */
+#define WM831X_LDO11_STS_MASK 0x0400 /* LDO11_STS */
+#define WM831X_LDO11_STS_SHIFT 10 /* LDO11_STS */
+#define WM831X_LDO11_STS_WIDTH 1 /* LDO11_STS */
+#define WM831X_LDO10_STS 0x0200 /* LDO10_STS */
+#define WM831X_LDO10_STS_MASK 0x0200 /* LDO10_STS */
+#define WM831X_LDO10_STS_SHIFT 9 /* LDO10_STS */
+#define WM831X_LDO10_STS_WIDTH 1 /* LDO10_STS */
+#define WM831X_LDO9_STS 0x0100 /* LDO9_STS */
+#define WM831X_LDO9_STS_MASK 0x0100 /* LDO9_STS */
+#define WM831X_LDO9_STS_SHIFT 8 /* LDO9_STS */
+#define WM831X_LDO9_STS_WIDTH 1 /* LDO9_STS */
+#define WM831X_LDO8_STS 0x0080 /* LDO8_STS */
+#define WM831X_LDO8_STS_MASK 0x0080 /* LDO8_STS */
+#define WM831X_LDO8_STS_SHIFT 7 /* LDO8_STS */
+#define WM831X_LDO8_STS_WIDTH 1 /* LDO8_STS */
+#define WM831X_LDO7_STS 0x0040 /* LDO7_STS */
+#define WM831X_LDO7_STS_MASK 0x0040 /* LDO7_STS */
+#define WM831X_LDO7_STS_SHIFT 6 /* LDO7_STS */
+#define WM831X_LDO7_STS_WIDTH 1 /* LDO7_STS */
+#define WM831X_LDO6_STS 0x0020 /* LDO6_STS */
+#define WM831X_LDO6_STS_MASK 0x0020 /* LDO6_STS */
+#define WM831X_LDO6_STS_SHIFT 5 /* LDO6_STS */
+#define WM831X_LDO6_STS_WIDTH 1 /* LDO6_STS */
+#define WM831X_LDO5_STS 0x0010 /* LDO5_STS */
+#define WM831X_LDO5_STS_MASK 0x0010 /* LDO5_STS */
+#define WM831X_LDO5_STS_SHIFT 4 /* LDO5_STS */
+#define WM831X_LDO5_STS_WIDTH 1 /* LDO5_STS */
+#define WM831X_LDO4_STS 0x0008 /* LDO4_STS */
+#define WM831X_LDO4_STS_MASK 0x0008 /* LDO4_STS */
+#define WM831X_LDO4_STS_SHIFT 3 /* LDO4_STS */
+#define WM831X_LDO4_STS_WIDTH 1 /* LDO4_STS */
+#define WM831X_LDO3_STS 0x0004 /* LDO3_STS */
+#define WM831X_LDO3_STS_MASK 0x0004 /* LDO3_STS */
+#define WM831X_LDO3_STS_SHIFT 2 /* LDO3_STS */
+#define WM831X_LDO3_STS_WIDTH 1 /* LDO3_STS */
+#define WM831X_LDO2_STS 0x0002 /* LDO2_STS */
+#define WM831X_LDO2_STS_MASK 0x0002 /* LDO2_STS */
+#define WM831X_LDO2_STS_SHIFT 1 /* LDO2_STS */
+#define WM831X_LDO2_STS_WIDTH 1 /* LDO2_STS */
+#define WM831X_LDO1_STS 0x0001 /* LDO1_STS */
+#define WM831X_LDO1_STS_MASK 0x0001 /* LDO1_STS */
+#define WM831X_LDO1_STS_SHIFT 0 /* LDO1_STS */
+#define WM831X_LDO1_STS_WIDTH 1 /* LDO1_STS */
+
+/*
+ * R16468 (0x4054) - DCDC UV Status
+ */
+#define WM831X_DC2_OV_STS 0x2000 /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_MASK 0x2000 /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_SHIFT 13 /* DC2_OV_STS */
+#define WM831X_DC2_OV_STS_WIDTH 1 /* DC2_OV_STS */
+#define WM831X_DC1_OV_STS 0x1000 /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_MASK 0x1000 /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_SHIFT 12 /* DC1_OV_STS */
+#define WM831X_DC1_OV_STS_WIDTH 1 /* DC1_OV_STS */
+#define WM831X_DC2_HC_STS 0x0200 /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_MASK 0x0200 /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_SHIFT 9 /* DC2_HC_STS */
+#define WM831X_DC2_HC_STS_WIDTH 1 /* DC2_HC_STS */
+#define WM831X_DC1_HC_STS 0x0100 /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_MASK 0x0100 /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_SHIFT 8 /* DC1_HC_STS */
+#define WM831X_DC1_HC_STS_WIDTH 1 /* DC1_HC_STS */
+#define WM831X_DC4_UV_STS 0x0008 /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_MASK 0x0008 /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_SHIFT 3 /* DC4_UV_STS */
+#define WM831X_DC4_UV_STS_WIDTH 1 /* DC4_UV_STS */
+#define WM831X_DC3_UV_STS 0x0004 /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_MASK 0x0004 /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_SHIFT 2 /* DC3_UV_STS */
+#define WM831X_DC3_UV_STS_WIDTH 1 /* DC3_UV_STS */
+#define WM831X_DC2_UV_STS 0x0002 /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_MASK 0x0002 /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_SHIFT 1 /* DC2_UV_STS */
+#define WM831X_DC2_UV_STS_WIDTH 1 /* DC2_UV_STS */
+#define WM831X_DC1_UV_STS 0x0001 /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_MASK 0x0001 /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_SHIFT 0 /* DC1_UV_STS */
+#define WM831X_DC1_UV_STS_WIDTH 1 /* DC1_UV_STS */
+
+/*
+ * R16469 (0x4055) - LDO UV Status
+ */
+#define WM831X_INTLDO_UV_STS 0x8000 /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_MASK 0x8000 /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_SHIFT 15 /* INTLDO_UV_STS */
+#define WM831X_INTLDO_UV_STS_WIDTH 1 /* INTLDO_UV_STS */
+#define WM831X_LDO10_UV_STS 0x0200 /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_MASK 0x0200 /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_SHIFT 9 /* LDO10_UV_STS */
+#define WM831X_LDO10_UV_STS_WIDTH 1 /* LDO10_UV_STS */
+#define WM831X_LDO9_UV_STS 0x0100 /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_MASK 0x0100 /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_SHIFT 8 /* LDO9_UV_STS */
+#define WM831X_LDO9_UV_STS_WIDTH 1 /* LDO9_UV_STS */
+#define WM831X_LDO8_UV_STS 0x0080 /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_MASK 0x0080 /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_SHIFT 7 /* LDO8_UV_STS */
+#define WM831X_LDO8_UV_STS_WIDTH 1 /* LDO8_UV_STS */
+#define WM831X_LDO7_UV_STS 0x0040 /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_MASK 0x0040 /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_SHIFT 6 /* LDO7_UV_STS */
+#define WM831X_LDO7_UV_STS_WIDTH 1 /* LDO7_UV_STS */
+#define WM831X_LDO6_UV_STS 0x0020 /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_MASK 0x0020 /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_SHIFT 5 /* LDO6_UV_STS */
+#define WM831X_LDO6_UV_STS_WIDTH 1 /* LDO6_UV_STS */
+#define WM831X_LDO5_UV_STS 0x0010 /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_MASK 0x0010 /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_SHIFT 4 /* LDO5_UV_STS */
+#define WM831X_LDO5_UV_STS_WIDTH 1 /* LDO5_UV_STS */
+#define WM831X_LDO4_UV_STS 0x0008 /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_MASK 0x0008 /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_SHIFT 3 /* LDO4_UV_STS */
+#define WM831X_LDO4_UV_STS_WIDTH 1 /* LDO4_UV_STS */
+#define WM831X_LDO3_UV_STS 0x0004 /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_MASK 0x0004 /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_SHIFT 2 /* LDO3_UV_STS */
+#define WM831X_LDO3_UV_STS_WIDTH 1 /* LDO3_UV_STS */
+#define WM831X_LDO2_UV_STS 0x0002 /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_MASK 0x0002 /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_SHIFT 1 /* LDO2_UV_STS */
+#define WM831X_LDO2_UV_STS_WIDTH 1 /* LDO2_UV_STS */
+#define WM831X_LDO1_UV_STS 0x0001 /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_MASK 0x0001 /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_SHIFT 0 /* LDO1_UV_STS */
+#define WM831X_LDO1_UV_STS_WIDTH 1 /* LDO1_UV_STS */
+
+/*
+ * R16470 (0x4056) - DC1 Control 1
+ */
+#define WM831X_DC1_RATE_MASK 0xC000 /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_SHIFT 14 /* DC1_RATE - [15:14] */
+#define WM831X_DC1_RATE_WIDTH 2 /* DC1_RATE - [15:14] */
+#define WM831X_DC1_PHASE 0x1000 /* DC1_PHASE */
+#define WM831X_DC1_PHASE_MASK 0x1000 /* DC1_PHASE */
+#define WM831X_DC1_PHASE_SHIFT 12 /* DC1_PHASE */
+#define WM831X_DC1_PHASE_WIDTH 1 /* DC1_PHASE */
+#define WM831X_DC1_FREQ_MASK 0x0300 /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_SHIFT 8 /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FREQ_WIDTH 2 /* DC1_FREQ - [9:8] */
+#define WM831X_DC1_FLT 0x0080 /* DC1_FLT */
+#define WM831X_DC1_FLT_MASK 0x0080 /* DC1_FLT */
+#define WM831X_DC1_FLT_SHIFT 7 /* DC1_FLT */
+#define WM831X_DC1_FLT_WIDTH 1 /* DC1_FLT */
+#define WM831X_DC1_SOFT_START_MASK 0x0030 /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_SHIFT 4 /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_SOFT_START_WIDTH 2 /* DC1_SOFT_START - [5:4] */
+#define WM831X_DC1_CAP_MASK 0x0003 /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_SHIFT 0 /* DC1_CAP - [1:0] */
+#define WM831X_DC1_CAP_WIDTH 2 /* DC1_CAP - [1:0] */
+
+/*
+ * R16471 (0x4057) - DC1 Control 2
+ */
+#define WM831X_DC1_ERR_ACT_MASK 0xC000 /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_SHIFT 14 /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_ERR_ACT_WIDTH 2 /* DC1_ERR_ACT - [15:14] */
+#define WM831X_DC1_HWC_SRC_MASK 0x1800 /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_SHIFT 11 /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_SRC_WIDTH 2 /* DC1_HWC_SRC - [12:11] */
+#define WM831X_DC1_HWC_VSEL 0x0400 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_MASK 0x0400 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_SHIFT 10 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_VSEL_WIDTH 1 /* DC1_HWC_VSEL */
+#define WM831X_DC1_HWC_MODE_MASK 0x0300 /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_SHIFT 8 /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HWC_MODE_WIDTH 2 /* DC1_HWC_MODE - [9:8] */
+#define WM831X_DC1_HC_THR_MASK 0x0070 /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_SHIFT 4 /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_THR_WIDTH 3 /* DC1_HC_THR - [6:4] */
+#define WM831X_DC1_HC_IND_ENA 0x0001 /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_MASK 0x0001 /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_SHIFT 0 /* DC1_HC_IND_ENA */
+#define WM831X_DC1_HC_IND_ENA_WIDTH 1 /* DC1_HC_IND_ENA */
+
+/*
+ * R16472 (0x4058) - DC1 ON Config
+ */
+#define WM831X_DC1_ON_SLOT_MASK 0xE000 /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_SHIFT 13 /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_SLOT_WIDTH 3 /* DC1_ON_SLOT - [15:13] */
+#define WM831X_DC1_ON_MODE_MASK 0x0300 /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_SHIFT 8 /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_MODE_WIDTH 2 /* DC1_ON_MODE - [9:8] */
+#define WM831X_DC1_ON_VSEL_MASK 0x007F /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_SHIFT 0 /* DC1_ON_VSEL - [6:0] */
+#define WM831X_DC1_ON_VSEL_WIDTH 7 /* DC1_ON_VSEL - [6:0] */
+
+/*
+ * R16473 (0x4059) - DC1 SLEEP Control
+ */
+#define WM831X_DC1_SLP_SLOT_MASK 0xE000 /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_SHIFT 13 /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_SLOT_WIDTH 3 /* DC1_SLP_SLOT - [15:13] */
+#define WM831X_DC1_SLP_MODE_MASK 0x0300 /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_SHIFT 8 /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_MODE_WIDTH 2 /* DC1_SLP_MODE - [9:8] */
+#define WM831X_DC1_SLP_VSEL_MASK 0x007F /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_SHIFT 0 /* DC1_SLP_VSEL - [6:0] */
+#define WM831X_DC1_SLP_VSEL_WIDTH 7 /* DC1_SLP_VSEL - [6:0] */
+
+/*
+ * R16474 (0x405A) - DC1 DVS Control
+ */
+#define WM831X_DC1_DVS_SRC_MASK 0x1800 /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_SHIFT 11 /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_SRC_WIDTH 2 /* DC1_DVS_SRC - [12:11] */
+#define WM831X_DC1_DVS_VSEL_MASK 0x007F /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_SHIFT 0 /* DC1_DVS_VSEL - [6:0] */
+#define WM831X_DC1_DVS_VSEL_WIDTH 7 /* DC1_DVS_VSEL - [6:0] */
+
+/*
+ * R16475 (0x405B) - DC2 Control 1
+ */
+#define WM831X_DC2_RATE_MASK 0xC000 /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_SHIFT 14 /* DC2_RATE - [15:14] */
+#define WM831X_DC2_RATE_WIDTH 2 /* DC2_RATE - [15:14] */
+#define WM831X_DC2_PHASE 0x1000 /* DC2_PHASE */
+#define WM831X_DC2_PHASE_MASK 0x1000 /* DC2_PHASE */
+#define WM831X_DC2_PHASE_SHIFT 12 /* DC2_PHASE */
+#define WM831X_DC2_PHASE_WIDTH 1 /* DC2_PHASE */
+#define WM831X_DC2_FREQ_MASK 0x0300 /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_SHIFT 8 /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FREQ_WIDTH 2 /* DC2_FREQ - [9:8] */
+#define WM831X_DC2_FLT 0x0080 /* DC2_FLT */
+#define WM831X_DC2_FLT_MASK 0x0080 /* DC2_FLT */
+#define WM831X_DC2_FLT_SHIFT 7 /* DC2_FLT */
+#define WM831X_DC2_FLT_WIDTH 1 /* DC2_FLT */
+#define WM831X_DC2_SOFT_START_MASK 0x0030 /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_SHIFT 4 /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_SOFT_START_WIDTH 2 /* DC2_SOFT_START - [5:4] */
+#define WM831X_DC2_CAP_MASK 0x0003 /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_SHIFT 0 /* DC2_CAP - [1:0] */
+#define WM831X_DC2_CAP_WIDTH 2 /* DC2_CAP - [1:0] */
+
+/*
+ * R16476 (0x405C) - DC2 Control 2
+ */
+#define WM831X_DC2_ERR_ACT_MASK 0xC000 /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_SHIFT 14 /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_ERR_ACT_WIDTH 2 /* DC2_ERR_ACT - [15:14] */
+#define WM831X_DC2_HWC_SRC_MASK 0x1800 /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_SHIFT 11 /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_SRC_WIDTH 2 /* DC2_HWC_SRC - [12:11] */
+#define WM831X_DC2_HWC_VSEL 0x0400 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_MASK 0x0400 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_SHIFT 10 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_VSEL_WIDTH 1 /* DC2_HWC_VSEL */
+#define WM831X_DC2_HWC_MODE_MASK 0x0300 /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_SHIFT 8 /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HWC_MODE_WIDTH 2 /* DC2_HWC_MODE - [9:8] */
+#define WM831X_DC2_HC_THR_MASK 0x0070 /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_SHIFT 4 /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_THR_WIDTH 3 /* DC2_HC_THR - [6:4] */
+#define WM831X_DC2_HC_IND_ENA 0x0001 /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_MASK 0x0001 /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_SHIFT 0 /* DC2_HC_IND_ENA */
+#define WM831X_DC2_HC_IND_ENA_WIDTH 1 /* DC2_HC_IND_ENA */
+
+/*
+ * R16477 (0x405D) - DC2 ON Config
+ */
+#define WM831X_DC2_ON_SLOT_MASK 0xE000 /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_SHIFT 13 /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_SLOT_WIDTH 3 /* DC2_ON_SLOT - [15:13] */
+#define WM831X_DC2_ON_MODE_MASK 0x0300 /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_SHIFT 8 /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_MODE_WIDTH 2 /* DC2_ON_MODE - [9:8] */
+#define WM831X_DC2_ON_VSEL_MASK 0x007F /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_SHIFT 0 /* DC2_ON_VSEL - [6:0] */
+#define WM831X_DC2_ON_VSEL_WIDTH 7 /* DC2_ON_VSEL - [6:0] */
+
+/*
+ * R16478 (0x405E) - DC2 SLEEP Control
+ */
+#define WM831X_DC2_SLP_SLOT_MASK 0xE000 /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_SHIFT 13 /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_SLOT_WIDTH 3 /* DC2_SLP_SLOT - [15:13] */
+#define WM831X_DC2_SLP_MODE_MASK 0x0300 /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_SHIFT 8 /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_MODE_WIDTH 2 /* DC2_SLP_MODE - [9:8] */
+#define WM831X_DC2_SLP_VSEL_MASK 0x007F /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_SHIFT 0 /* DC2_SLP_VSEL - [6:0] */
+#define WM831X_DC2_SLP_VSEL_WIDTH 7 /* DC2_SLP_VSEL - [6:0] */
+
+/*
+ * R16479 (0x405F) - DC2 DVS Control
+ */
+#define WM831X_DC2_DVS_SRC_MASK 0x1800 /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_SHIFT 11 /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_SRC_WIDTH 2 /* DC2_DVS_SRC - [12:11] */
+#define WM831X_DC2_DVS_VSEL_MASK 0x007F /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_SHIFT 0 /* DC2_DVS_VSEL - [6:0] */
+#define WM831X_DC2_DVS_VSEL_WIDTH 7 /* DC2_DVS_VSEL - [6:0] */
+
+/*
+ * R16480 (0x4060) - DC3 Control 1
+ */
+#define WM831X_DC3_PHASE 0x1000 /* DC3_PHASE */
+#define WM831X_DC3_PHASE_MASK 0x1000 /* DC3_PHASE */
+#define WM831X_DC3_PHASE_SHIFT 12 /* DC3_PHASE */
+#define WM831X_DC3_PHASE_WIDTH 1 /* DC3_PHASE */
+#define WM831X_DC3_FLT 0x0080 /* DC3_FLT */
+#define WM831X_DC3_FLT_MASK 0x0080 /* DC3_FLT */
+#define WM831X_DC3_FLT_SHIFT 7 /* DC3_FLT */
+#define WM831X_DC3_FLT_WIDTH 1 /* DC3_FLT */
+#define WM831X_DC3_SOFT_START_MASK 0x0030 /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_SHIFT 4 /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_SOFT_START_WIDTH 2 /* DC3_SOFT_START - [5:4] */
+#define WM831X_DC3_STNBY_LIM_MASK 0x000C /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_SHIFT 2 /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_STNBY_LIM_WIDTH 2 /* DC3_STNBY_LIM - [3:2] */
+#define WM831X_DC3_CAP_MASK 0x0003 /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_SHIFT 0 /* DC3_CAP - [1:0] */
+#define WM831X_DC3_CAP_WIDTH 2 /* DC3_CAP - [1:0] */
+
+/*
+ * R16481 (0x4061) - DC3 Control 2
+ */
+#define WM831X_DC3_ERR_ACT_MASK 0xC000 /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_SHIFT 14 /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_ERR_ACT_WIDTH 2 /* DC3_ERR_ACT - [15:14] */
+#define WM831X_DC3_HWC_SRC_MASK 0x1800 /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_SHIFT 11 /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_SRC_WIDTH 2 /* DC3_HWC_SRC - [12:11] */
+#define WM831X_DC3_HWC_VSEL 0x0400 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_MASK 0x0400 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_SHIFT 10 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_VSEL_WIDTH 1 /* DC3_HWC_VSEL */
+#define WM831X_DC3_HWC_MODE_MASK 0x0300 /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_SHIFT 8 /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_HWC_MODE_WIDTH 2 /* DC3_HWC_MODE - [9:8] */
+#define WM831X_DC3_OVP 0x0080 /* DC3_OVP */
+#define WM831X_DC3_OVP_MASK 0x0080 /* DC3_OVP */
+#define WM831X_DC3_OVP_SHIFT 7 /* DC3_OVP */
+#define WM831X_DC3_OVP_WIDTH 1 /* DC3_OVP */
+
+/*
+ * R16482 (0x4062) - DC3 ON Config
+ */
+#define WM831X_DC3_ON_SLOT_MASK 0xE000 /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_SHIFT 13 /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_SLOT_WIDTH 3 /* DC3_ON_SLOT - [15:13] */
+#define WM831X_DC3_ON_MODE_MASK 0x0300 /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_SHIFT 8 /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_MODE_WIDTH 2 /* DC3_ON_MODE - [9:8] */
+#define WM831X_DC3_ON_VSEL_MASK 0x007F /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_SHIFT 0 /* DC3_ON_VSEL - [6:0] */
+#define WM831X_DC3_ON_VSEL_WIDTH 7 /* DC3_ON_VSEL - [6:0] */
+
+/*
+ * R16483 (0x4063) - DC3 SLEEP Control
+ */
+#define WM831X_DC3_SLP_SLOT_MASK 0xE000 /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_SHIFT 13 /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_SLOT_WIDTH 3 /* DC3_SLP_SLOT - [15:13] */
+#define WM831X_DC3_SLP_MODE_MASK 0x0300 /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_SHIFT 8 /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_MODE_WIDTH 2 /* DC3_SLP_MODE - [9:8] */
+#define WM831X_DC3_SLP_VSEL_MASK 0x007F /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_SHIFT 0 /* DC3_SLP_VSEL - [6:0] */
+#define WM831X_DC3_SLP_VSEL_WIDTH 7 /* DC3_SLP_VSEL - [6:0] */
+
+/*
+ * R16484 (0x4064) - DC4 Control
+ */
+#define WM831X_DC4_ERR_ACT_MASK 0xC000 /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_SHIFT 14 /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_ERR_ACT_WIDTH 2 /* DC4_ERR_ACT - [15:14] */
+#define WM831X_DC4_HWC_SRC_MASK 0x1800 /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_SHIFT 11 /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_SRC_WIDTH 2 /* DC4_HWC_SRC - [12:11] */
+#define WM831X_DC4_HWC_MODE 0x0100 /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_MASK 0x0100 /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_SHIFT 8 /* DC4_HWC_MODE */
+#define WM831X_DC4_HWC_MODE_WIDTH 1 /* DC4_HWC_MODE */
+#define WM831X_DC4_RANGE_MASK 0x000C /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_SHIFT 2 /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_RANGE_WIDTH 2 /* DC4_RANGE - [3:2] */
+#define WM831X_DC4_FBSRC 0x0001 /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_MASK 0x0001 /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_SHIFT 0 /* DC4_FBSRC */
+#define WM831X_DC4_FBSRC_WIDTH 1 /* DC4_FBSRC */
+
+/*
+ * R16485 (0x4065) - DC4 SLEEP Control
+ */
+#define WM831X_DC4_SLPENA 0x0100 /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_MASK 0x0100 /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_SHIFT 8 /* DC4_SLPENA */
+#define WM831X_DC4_SLPENA_WIDTH 1 /* DC4_SLPENA */
+
+/*
+ * R16526 (0x408E) - Power Good Source 1
+ */
+#define WM831X_DC4_OK 0x0008 /* DC4_OK */
+#define WM831X_DC4_OK_MASK 0x0008 /* DC4_OK */
+#define WM831X_DC4_OK_SHIFT 3 /* DC4_OK */
+#define WM831X_DC4_OK_WIDTH 1 /* DC4_OK */
+#define WM831X_DC3_OK 0x0004 /* DC3_OK */
+#define WM831X_DC3_OK_MASK 0x0004 /* DC3_OK */
+#define WM831X_DC3_OK_SHIFT 2 /* DC3_OK */
+#define WM831X_DC3_OK_WIDTH 1 /* DC3_OK */
+#define WM831X_DC2_OK 0x0002 /* DC2_OK */
+#define WM831X_DC2_OK_MASK 0x0002 /* DC2_OK */
+#define WM831X_DC2_OK_SHIFT 1 /* DC2_OK */
+#define WM831X_DC2_OK_WIDTH 1 /* DC2_OK */
+#define WM831X_DC1_OK 0x0001 /* DC1_OK */
+#define WM831X_DC1_OK_MASK 0x0001 /* DC1_OK */
+#define WM831X_DC1_OK_SHIFT 0 /* DC1_OK */
+#define WM831X_DC1_OK_WIDTH 1 /* DC1_OK */
+
#define WM831X_ISINK_MAX_ISEL 56
extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 18/23] regulator: Add WM831x LDO support
2009-07-27 13:46 ` [PATCH 17/22] regulator: Add WM831x LDO support Mark Brown
@ 2009-07-28 14:22 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:22 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of devices provide three types of LDO:
- General purpose LDOs supporting voltages from 0.9-3.3V
- High performance analogue LDOs supporting voltages from 1-3.5V
- Very low power consumption LDOs intended to support always on
functionality.
This patch adds support for all three kinds of LDO. Each regulator
is probed as an individual platform device with resources used to
provide the register map location of the regulator. Mixed hardware
and software control of regulators is not current supported.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
Support missing platform data for the chip as a whole.
drivers/regulator/Makefile | 1 +
drivers/regulator/wm831x-ldo.c | 852 ++++++++++++++++++++++++++++++++++
include/linux/mfd/wm831x/regulator.h | 626 +++++++++++++++++++++++++
3 files changed, 1479 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/wm831x-ldo.c
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index b1d2b82..a0a635f 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
diff --git a/drivers/regulator/wm831x-ldo.c b/drivers/regulator/wm831x-ldo.c
new file mode 100644
index 0000000..bb61aed
--- /dev/null
+++ b/drivers/regulator/wm831x-ldo.c
@@ -0,0 +1,852 @@
+/*
+ * wm831x-ldo.c -- LDO driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_LDO_MAX_NAME 6
+
+#define WM831X_LDO_CONTROL 0
+#define WM831X_LDO_ON_CONTROL 1
+#define WM831X_LDO_SLEEP_CONTROL 2
+
+#define WM831X_ALIVE_LDO_ON_CONTROL 0
+#define WM831X_ALIVE_LDO_SLEEP_CONTROL 1
+
+struct wm831x_ldo {
+ char name[WM831X_LDO_MAX_NAME];
+ struct regulator_desc desc;
+ int base;
+ struct wm831x *wm831x;
+ struct regulator_dev *regulator;
+};
+
+/*
+ * Shared
+ */
+
+static int wm831x_ldo_is_enabled(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int reg;
+
+ reg = wm831x_reg_read(wm831x, WM831X_LDO_ENABLE);
+ if (reg < 0)
+ return reg;
+
+ if (reg & mask)
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_ldo_enable(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, mask);
+}
+
+static int wm831x_ldo_disable(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+
+ return wm831x_set_bits(wm831x, WM831X_LDO_ENABLE, mask, 0);
+}
+
+static irqreturn_t wm831x_ldo_uv_irq(int irq, void *data)
+{
+ struct wm831x_ldo *ldo = data;
+
+ regulator_notifier_call_chain(ldo->regulator,
+ REGULATOR_EVENT_UNDER_VOLTAGE,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * General purpose LDOs
+ */
+
+#define WM831X_GP_LDO_SELECTOR_LOW 0xe
+#define WM831X_GP_LDO_MAX_SELECTOR 0x1f
+
+static int wm831x_gp_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ /* 0.9-1.6V in 50mV steps */
+ if (selector <= WM831X_GP_LDO_SELECTOR_LOW)
+ return 900000 + (selector * 50000);
+ /* 1.7-3.3V in 50mV steps */
+ if (selector <= WM831X_GP_LDO_MAX_SELECTOR)
+ return 1600000 + ((selector - WM831X_GP_LDO_SELECTOR_LOW)
+ * 100000);
+ return -EINVAL;
+}
+
+static int wm831x_gp_ldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int vsel, ret;
+
+ if (min_uV < 900000)
+ vsel = 0;
+ else if (min_uV < 1700000)
+ vsel = ((min_uV - 900000) / 50000);
+ else
+ vsel = ((min_uV - 1700000) / 100000)
+ + WM831X_GP_LDO_SELECTOR_LOW + 1;
+
+ ret = wm831x_gp_ldo_list_voltage(rdev, vsel);
+ if (ret < 0)
+ return ret;
+ if (ret < min_uV || ret > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO1_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_gp_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+ return wm831x_gp_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_gp_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+ return wm831x_gp_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_gp_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_LDO1_ON_VSEL_MASK;
+
+ return wm831x_gp_ldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_mode(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ unsigned int ret;
+
+ ret = wm831x_reg_read(wm831x, on_reg);
+ if (ret < 0)
+ return 0;
+
+ if (!(ret & WM831X_LDO1_ON_MODE))
+ return REGULATOR_MODE_NORMAL;
+
+ ret = wm831x_reg_read(wm831x, ctrl_reg);
+ if (ret < 0)
+ return 0;
+
+ if (ret & WM831X_LDO1_LP_MODE)
+ return REGULATOR_MODE_STANDBY;
+ else
+ return REGULATOR_MODE_IDLE;
+}
+
+static int wm831x_gp_ldo_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO1_ON_MODE, 0);
+ if (ret < 0)
+ return ret;
+ break;
+
+ case REGULATOR_MODE_IDLE:
+ ret = wm831x_set_bits(wm831x, ctrl_reg,
+ WM831X_LDO1_LP_MODE,
+ WM831X_LDO1_LP_MODE);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO1_ON_MODE,
+ WM831X_LDO1_ON_MODE);
+ if (ret < 0)
+ return ret;
+
+ case REGULATOR_MODE_STANDBY:
+ ret = wm831x_set_bits(wm831x, ctrl_reg,
+ WM831X_LDO1_LP_MODE, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO1_ON_MODE,
+ WM831X_LDO1_ON_MODE);
+ if (ret < 0)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm831x_gp_ldo_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int ret;
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+ if (ret < 0)
+ return ret;
+ if (!(ret & mask))
+ return REGULATOR_STATUS_OFF;
+
+ /* Is it reporting under voltage? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+ if (ret & mask)
+ return REGULATOR_STATUS_ERROR;
+
+ ret = wm831x_gp_ldo_get_mode(rdev);
+ if (ret < 0)
+ return ret;
+ else
+ return regulator_mode_to_status(ret);
+}
+
+static unsigned int wm831x_gp_ldo_get_optimum_mode(struct regulator_dev *rdev,
+ int input_uV,
+ int output_uV, int load_uA)
+{
+ if (load_uA < 20000)
+ return REGULATOR_MODE_STANDBY;
+ if (load_uA < 50000)
+ return REGULATOR_MODE_IDLE;
+ return REGULATOR_MODE_NORMAL;
+}
+
+
+static struct regulator_ops wm831x_gp_ldo_ops = {
+ .list_voltage = wm831x_gp_ldo_list_voltage,
+ .get_voltage = wm831x_gp_ldo_get_voltage,
+ .set_voltage = wm831x_gp_ldo_set_voltage,
+ .set_suspend_voltage = wm831x_gp_ldo_set_suspend_voltage,
+ .get_mode = wm831x_gp_ldo_get_mode,
+ .set_mode = wm831x_gp_ldo_set_mode,
+ .get_status = wm831x_gp_ldo_get_status,
+ .get_optimum_mode = wm831x_gp_ldo_get_optimum_mode,
+
+ .is_enabled = wm831x_ldo_is_enabled,
+ .enable = wm831x_ldo_enable,
+ .disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_gp_ldo_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+ struct wm831x_ldo *ldo;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+ if (pdata == NULL || pdata->ldo[id] == NULL)
+ return -ENODEV;
+
+ ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+ if (ldo == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ ldo->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ldo->base = res->start;
+
+ snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+ ldo->desc.name = ldo->name;
+ ldo->desc.id = id;
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.n_voltages = WM831X_GP_LDO_MAX_SELECTOR + 1;
+ ldo->desc.ops = &wm831x_gp_ldo_ops;
+ ldo->desc.owner = THIS_MODULE;
+
+ ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+ pdata->ldo[id], ldo);
+ if (IS_ERR(ldo->regulator)) {
+ ret = PTR_ERR(ldo->regulator);
+ dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+ IRQF_TRIGGER_RISING, ldo->name,
+ ldo);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(ldo->regulator);
+err:
+ kfree(ldo);
+ return ret;
+}
+
+static __devexit int wm831x_gp_ldo_remove(struct platform_device *pdev)
+{
+ struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = ldo->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+ regulator_unregister(ldo->regulator);
+ kfree(ldo);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_gp_ldo_driver = {
+ .probe = wm831x_gp_ldo_probe,
+ .remove = __devexit_p(wm831x_gp_ldo_remove),
+ .driver = {
+ .name = "wm831x-ldo",
+ },
+};
+
+/*
+ * Analogue LDOs
+ */
+
+
+#define WM831X_ALDO_SELECTOR_LOW 0xc
+#define WM831X_ALDO_MAX_SELECTOR 0x1f
+
+static int wm831x_aldo_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ /* 1-1.6V in 50mV steps */
+ if (selector <= WM831X_ALDO_SELECTOR_LOW)
+ return 1000000 + (selector * 50000);
+ /* 1.7-3.5V in 50mV steps */
+ if (selector <= WM831X_ALDO_MAX_SELECTOR)
+ return 1600000 + ((selector - WM831X_ALDO_SELECTOR_LOW)
+ * 100000);
+ return -EINVAL;
+}
+
+static int wm831x_aldo_set_voltage_int(struct regulator_dev *rdev, int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int vsel, ret;
+
+ if (min_uV < 1000000)
+ vsel = 0;
+ else if (min_uV < 1700000)
+ vsel = ((min_uV - 1000000) / 50000);
+ else
+ vsel = ((min_uV - 1700000) / 100000)
+ + WM831X_ALDO_SELECTOR_LOW + 1;
+
+ ret = wm831x_aldo_list_voltage(rdev, vsel);
+ if (ret < 0)
+ return ret;
+ if (ret < min_uV || ret > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO7_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_aldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+
+ return wm831x_aldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_aldo_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_LDO_SLEEP_CONTROL;
+
+ return wm831x_aldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_aldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_LDO7_ON_VSEL_MASK;
+
+ return wm831x_aldo_list_voltage(rdev, ret);
+}
+
+static unsigned int wm831x_aldo_get_mode(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ unsigned int ret;
+
+ ret = wm831x_reg_read(wm831x, on_reg);
+ if (ret < 0)
+ return 0;
+
+ if (ret & WM831X_LDO7_ON_MODE)
+ return REGULATOR_MODE_IDLE;
+ else
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int wm831x_aldo_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int ctrl_reg = ldo->base + WM831X_LDO_CONTROL;
+ int on_reg = ldo->base + WM831X_LDO_ON_CONTROL;
+ int ret;
+
+
+ switch (mode) {
+ case REGULATOR_MODE_NORMAL:
+ ret = wm831x_set_bits(wm831x, on_reg,
+ WM831X_LDO7_ON_MODE, 0);
+ if (ret < 0)
+ return ret;
+ break;
+
+ case REGULATOR_MODE_IDLE:
+ ret = wm831x_set_bits(wm831x, ctrl_reg,
+ WM831X_LDO7_ON_MODE,
+ WM831X_LDO7_ON_MODE);
+ if (ret < 0)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int wm831x_aldo_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int ret;
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+ if (ret < 0)
+ return ret;
+ if (!(ret & mask))
+ return REGULATOR_STATUS_OFF;
+
+ /* Is it reporting under voltage? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_UV_STATUS);
+ if (ret & mask)
+ return REGULATOR_STATUS_ERROR;
+
+ ret = wm831x_aldo_get_mode(rdev);
+ if (ret < 0)
+ return ret;
+ else
+ return regulator_mode_to_status(ret);
+}
+
+static struct regulator_ops wm831x_aldo_ops = {
+ .list_voltage = wm831x_aldo_list_voltage,
+ .get_voltage = wm831x_aldo_get_voltage,
+ .set_voltage = wm831x_aldo_set_voltage,
+ .set_suspend_voltage = wm831x_aldo_set_suspend_voltage,
+ .get_mode = wm831x_aldo_get_mode,
+ .set_mode = wm831x_aldo_set_mode,
+ .get_status = wm831x_aldo_get_status,
+
+ .is_enabled = wm831x_ldo_is_enabled,
+ .enable = wm831x_ldo_enable,
+ .disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_aldo_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+ struct wm831x_ldo *ldo;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+ if (pdata == NULL || pdata->ldo[id] == NULL)
+ return -ENODEV;
+
+ ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+ if (ldo == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ ldo->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ldo->base = res->start;
+
+ snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+ ldo->desc.name = ldo->name;
+ ldo->desc.id = id;
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.n_voltages = WM831X_ALDO_MAX_SELECTOR + 1;
+ ldo->desc.ops = &wm831x_aldo_ops;
+ ldo->desc.owner = THIS_MODULE;
+
+ ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+ pdata->ldo[id], ldo);
+ if (IS_ERR(ldo->regulator)) {
+ ret = PTR_ERR(ldo->regulator);
+ dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_ldo_uv_irq,
+ IRQF_TRIGGER_RISING, ldo->name,
+ ldo);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(ldo->regulator);
+err:
+ kfree(ldo);
+ return ret;
+}
+
+static __devexit int wm831x_aldo_remove(struct platform_device *pdev)
+{
+ struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = ldo->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), ldo);
+ regulator_unregister(ldo->regulator);
+ kfree(ldo);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_aldo_driver = {
+ .probe = wm831x_aldo_probe,
+ .remove = __devexit_p(wm831x_aldo_remove),
+ .driver = {
+ .name = "wm831x-aldo",
+ },
+};
+
+/*
+ * Alive LDO
+ */
+
+#define WM831X_ALIVE_LDO_MAX_SELECTOR 0xf
+
+static int wm831x_alive_ldo_list_voltage(struct regulator_dev *rdev,
+ unsigned int selector)
+{
+ /* 0.8-1.55V in 50mV steps */
+ if (selector <= WM831X_ALIVE_LDO_MAX_SELECTOR)
+ return 800000 + (selector * 50000);
+ return -EINVAL;
+}
+
+static int wm831x_alive_ldo_set_voltage_int(struct regulator_dev *rdev,
+ int reg,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int vsel, ret;
+
+ vsel = (min_uV - 800000) / 50000;
+
+ ret = wm831x_alive_ldo_list_voltage(rdev, vsel);
+ if (ret < 0)
+ return ret;
+ if (ret < min_uV || ret > max_uV)
+ return -EINVAL;
+
+ return wm831x_set_bits(wm831x, reg, WM831X_LDO11_ON_VSEL_MASK, vsel);
+}
+
+static int wm831x_alive_ldo_set_voltage(struct regulator_dev *rdev,
+ int min_uV, int max_uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+
+ return wm831x_alive_ldo_set_voltage_int(rdev, reg, min_uV, max_uV);
+}
+
+static int wm831x_alive_ldo_set_suspend_voltage(struct regulator_dev *rdev,
+ int uV)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ int reg = ldo->base + WM831X_ALIVE_LDO_SLEEP_CONTROL;
+
+ return wm831x_alive_ldo_set_voltage_int(rdev, reg, uV, uV);
+}
+
+static int wm831x_alive_ldo_get_voltage(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int reg = ldo->base + WM831X_ALIVE_LDO_ON_CONTROL;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_LDO11_ON_VSEL_MASK;
+
+ return wm831x_alive_ldo_list_voltage(rdev, ret);
+}
+
+static int wm831x_alive_ldo_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_ldo *ldo = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = ldo->wm831x;
+ int mask = 1 << rdev_get_id(rdev);
+ int ret;
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_LDO_STATUS);
+ if (ret < 0)
+ return ret;
+ if (ret & mask)
+ return REGULATOR_STATUS_ON;
+ else
+ return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_alive_ldo_ops = {
+ .list_voltage = wm831x_alive_ldo_list_voltage,
+ .get_voltage = wm831x_alive_ldo_get_voltage,
+ .set_voltage = wm831x_alive_ldo_set_voltage,
+ .set_suspend_voltage = wm831x_alive_ldo_set_suspend_voltage,
+ .get_status = wm831x_alive_ldo_get_status,
+
+ .is_enabled = wm831x_ldo_is_enabled,
+ .enable = wm831x_ldo_enable,
+ .disable = wm831x_ldo_disable,
+};
+
+static __devinit int wm831x_alive_ldo_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->ldo);
+ struct wm831x_ldo *ldo;
+ struct resource *res;
+ int ret;
+
+ dev_dbg(&pdev->dev, "Probing LDO%d\n", id + 1);
+
+ if (pdata == NULL || pdata->ldo[id] == NULL)
+ return -ENODEV;
+
+ ldo = kzalloc(sizeof(struct wm831x_ldo), GFP_KERNEL);
+ if (ldo == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ ldo->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ ldo->base = res->start;
+
+ snprintf(ldo->name, sizeof(ldo->name), "LDO%d", id + 1);
+ ldo->desc.name = ldo->name;
+ ldo->desc.id = id;
+ ldo->desc.type = REGULATOR_VOLTAGE;
+ ldo->desc.n_voltages = WM831X_ALIVE_LDO_MAX_SELECTOR + 1;
+ ldo->desc.ops = &wm831x_alive_ldo_ops;
+ ldo->desc.owner = THIS_MODULE;
+
+ ldo->regulator = regulator_register(&ldo->desc, &pdev->dev,
+ pdata->ldo[id], ldo);
+ if (IS_ERR(ldo->regulator)) {
+ ret = PTR_ERR(ldo->regulator);
+ dev_err(wm831x->dev, "Failed to register LDO%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, ldo);
+
+ return 0;
+
+err:
+ kfree(ldo);
+ return ret;
+}
+
+static __devexit int wm831x_alive_ldo_remove(struct platform_device *pdev)
+{
+ struct wm831x_ldo *ldo = platform_get_drvdata(pdev);
+
+ regulator_unregister(ldo->regulator);
+ kfree(ldo);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_alive_ldo_driver = {
+ .probe = wm831x_alive_ldo_probe,
+ .remove = __devexit_p(wm831x_alive_ldo_remove),
+ .driver = {
+ .name = "wm831x-alive-ldo",
+ },
+};
+
+static int __init wm831x_ldo_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&wm831x_gp_ldo_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x GP LDO driver: %d\n", ret);
+
+ ret = platform_driver_register(&wm831x_aldo_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x ALDO driver: %d\n", ret);
+
+ ret = platform_driver_register(&wm831x_alive_ldo_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x alive LDO driver: %d\n",
+ ret);
+
+ return 0;
+}
+subsys_initcall(wm831x_ldo_init);
+
+static void __exit wm831x_ldo_exit(void)
+{
+ platform_driver_unregister(&wm831x_alive_ldo_driver);
+ platform_driver_unregister(&wm831x_aldo_driver);
+ platform_driver_unregister(&wm831x_gp_ldo_driver);
+}
+module_exit(wm831x_ldo_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x LDO driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-ldo");
+MODULE_ALIAS("platform:wm831x-aldo");
+MODULE_ALIAS("platform:wm831x-aliveldo");
diff --git a/include/linux/mfd/wm831x/regulator.h b/include/linux/mfd/wm831x/regulator.h
index c74d6aa..f954663 100644
--- a/include/linux/mfd/wm831x/regulator.h
+++ b/include/linux/mfd/wm831x/regulator.h
@@ -567,6 +567,588 @@
#define WM831X_DC4_SLPENA_WIDTH 1 /* DC4_SLPENA */
/*
+ * R16488 (0x4068) - LDO1 Control
+ */
+#define WM831X_LDO1_ERR_ACT_MASK 0xC000 /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_SHIFT 14 /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_ERR_ACT_WIDTH 2 /* LDO1_ERR_ACT - [15:14] */
+#define WM831X_LDO1_HWC_SRC_MASK 0x1800 /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_SHIFT 11 /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_SRC_WIDTH 2 /* LDO1_HWC_SRC - [12:11] */
+#define WM831X_LDO1_HWC_VSEL 0x0400 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_MASK 0x0400 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_SHIFT 10 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_VSEL_WIDTH 1 /* LDO1_HWC_VSEL */
+#define WM831X_LDO1_HWC_MODE_MASK 0x0300 /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_SHIFT 8 /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_HWC_MODE_WIDTH 2 /* LDO1_HWC_MODE - [9:8] */
+#define WM831X_LDO1_FLT 0x0080 /* LDO1_FLT */
+#define WM831X_LDO1_FLT_MASK 0x0080 /* LDO1_FLT */
+#define WM831X_LDO1_FLT_SHIFT 7 /* LDO1_FLT */
+#define WM831X_LDO1_FLT_WIDTH 1 /* LDO1_FLT */
+#define WM831X_LDO1_SWI 0x0040 /* LDO1_SWI */
+#define WM831X_LDO1_SWI_MASK 0x0040 /* LDO1_SWI */
+#define WM831X_LDO1_SWI_SHIFT 6 /* LDO1_SWI */
+#define WM831X_LDO1_SWI_WIDTH 1 /* LDO1_SWI */
+#define WM831X_LDO1_LP_MODE 0x0001 /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_MASK 0x0001 /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_SHIFT 0 /* LDO1_LP_MODE */
+#define WM831X_LDO1_LP_MODE_WIDTH 1 /* LDO1_LP_MODE */
+
+/*
+ * R16489 (0x4069) - LDO1 ON Control
+ */
+#define WM831X_LDO1_ON_SLOT_MASK 0xE000 /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_SHIFT 13 /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_SLOT_WIDTH 3 /* LDO1_ON_SLOT - [15:13] */
+#define WM831X_LDO1_ON_MODE 0x0100 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_MASK 0x0100 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_SHIFT 8 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_MODE_WIDTH 1 /* LDO1_ON_MODE */
+#define WM831X_LDO1_ON_VSEL_MASK 0x001F /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_SHIFT 0 /* LDO1_ON_VSEL - [4:0] */
+#define WM831X_LDO1_ON_VSEL_WIDTH 5 /* LDO1_ON_VSEL - [4:0] */
+
+/*
+ * R16490 (0x406A) - LDO1 SLEEP Control
+ */
+#define WM831X_LDO1_SLP_SLOT_MASK 0xE000 /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_SHIFT 13 /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_SLOT_WIDTH 3 /* LDO1_SLP_SLOT - [15:13] */
+#define WM831X_LDO1_SLP_MODE 0x0100 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_MASK 0x0100 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_SHIFT 8 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_MODE_WIDTH 1 /* LDO1_SLP_MODE */
+#define WM831X_LDO1_SLP_VSEL_MASK 0x001F /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_SHIFT 0 /* LDO1_SLP_VSEL - [4:0] */
+#define WM831X_LDO1_SLP_VSEL_WIDTH 5 /* LDO1_SLP_VSEL - [4:0] */
+
+/*
+ * R16491 (0x406B) - LDO2 Control
+ */
+#define WM831X_LDO2_ERR_ACT_MASK 0xC000 /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_SHIFT 14 /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_ERR_ACT_WIDTH 2 /* LDO2_ERR_ACT - [15:14] */
+#define WM831X_LDO2_HWC_SRC_MASK 0x1800 /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_SHIFT 11 /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_SRC_WIDTH 2 /* LDO2_HWC_SRC - [12:11] */
+#define WM831X_LDO2_HWC_VSEL 0x0400 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_MASK 0x0400 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_SHIFT 10 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_VSEL_WIDTH 1 /* LDO2_HWC_VSEL */
+#define WM831X_LDO2_HWC_MODE_MASK 0x0300 /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_SHIFT 8 /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_HWC_MODE_WIDTH 2 /* LDO2_HWC_MODE - [9:8] */
+#define WM831X_LDO2_FLT 0x0080 /* LDO2_FLT */
+#define WM831X_LDO2_FLT_MASK 0x0080 /* LDO2_FLT */
+#define WM831X_LDO2_FLT_SHIFT 7 /* LDO2_FLT */
+#define WM831X_LDO2_FLT_WIDTH 1 /* LDO2_FLT */
+#define WM831X_LDO2_SWI 0x0040 /* LDO2_SWI */
+#define WM831X_LDO2_SWI_MASK 0x0040 /* LDO2_SWI */
+#define WM831X_LDO2_SWI_SHIFT 6 /* LDO2_SWI */
+#define WM831X_LDO2_SWI_WIDTH 1 /* LDO2_SWI */
+#define WM831X_LDO2_LP_MODE 0x0001 /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_MASK 0x0001 /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_SHIFT 0 /* LDO2_LP_MODE */
+#define WM831X_LDO2_LP_MODE_WIDTH 1 /* LDO2_LP_MODE */
+
+/*
+ * R16492 (0x406C) - LDO2 ON Control
+ */
+#define WM831X_LDO2_ON_SLOT_MASK 0xE000 /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_SHIFT 13 /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_SLOT_WIDTH 3 /* LDO2_ON_SLOT - [15:13] */
+#define WM831X_LDO2_ON_MODE 0x0100 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_MASK 0x0100 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_SHIFT 8 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_MODE_WIDTH 1 /* LDO2_ON_MODE */
+#define WM831X_LDO2_ON_VSEL_MASK 0x001F /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_SHIFT 0 /* LDO2_ON_VSEL - [4:0] */
+#define WM831X_LDO2_ON_VSEL_WIDTH 5 /* LDO2_ON_VSEL - [4:0] */
+
+/*
+ * R16493 (0x406D) - LDO2 SLEEP Control
+ */
+#define WM831X_LDO2_SLP_SLOT_MASK 0xE000 /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_SHIFT 13 /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_SLOT_WIDTH 3 /* LDO2_SLP_SLOT - [15:13] */
+#define WM831X_LDO2_SLP_MODE 0x0100 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_MASK 0x0100 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_SHIFT 8 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_MODE_WIDTH 1 /* LDO2_SLP_MODE */
+#define WM831X_LDO2_SLP_VSEL_MASK 0x001F /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_SHIFT 0 /* LDO2_SLP_VSEL - [4:0] */
+#define WM831X_LDO2_SLP_VSEL_WIDTH 5 /* LDO2_SLP_VSEL - [4:0] */
+
+/*
+ * R16494 (0x406E) - LDO3 Control
+ */
+#define WM831X_LDO3_ERR_ACT_MASK 0xC000 /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_SHIFT 14 /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_ERR_ACT_WIDTH 2 /* LDO3_ERR_ACT - [15:14] */
+#define WM831X_LDO3_HWC_SRC_MASK 0x1800 /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_SHIFT 11 /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_SRC_WIDTH 2 /* LDO3_HWC_SRC - [12:11] */
+#define WM831X_LDO3_HWC_VSEL 0x0400 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_MASK 0x0400 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_SHIFT 10 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_VSEL_WIDTH 1 /* LDO3_HWC_VSEL */
+#define WM831X_LDO3_HWC_MODE_MASK 0x0300 /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_SHIFT 8 /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_HWC_MODE_WIDTH 2 /* LDO3_HWC_MODE - [9:8] */
+#define WM831X_LDO3_FLT 0x0080 /* LDO3_FLT */
+#define WM831X_LDO3_FLT_MASK 0x0080 /* LDO3_FLT */
+#define WM831X_LDO3_FLT_SHIFT 7 /* LDO3_FLT */
+#define WM831X_LDO3_FLT_WIDTH 1 /* LDO3_FLT */
+#define WM831X_LDO3_SWI 0x0040 /* LDO3_SWI */
+#define WM831X_LDO3_SWI_MASK 0x0040 /* LDO3_SWI */
+#define WM831X_LDO3_SWI_SHIFT 6 /* LDO3_SWI */
+#define WM831X_LDO3_SWI_WIDTH 1 /* LDO3_SWI */
+#define WM831X_LDO3_LP_MODE 0x0001 /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_MASK 0x0001 /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_SHIFT 0 /* LDO3_LP_MODE */
+#define WM831X_LDO3_LP_MODE_WIDTH 1 /* LDO3_LP_MODE */
+
+/*
+ * R16495 (0x406F) - LDO3 ON Control
+ */
+#define WM831X_LDO3_ON_SLOT_MASK 0xE000 /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_SHIFT 13 /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_SLOT_WIDTH 3 /* LDO3_ON_SLOT - [15:13] */
+#define WM831X_LDO3_ON_MODE 0x0100 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_MASK 0x0100 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_SHIFT 8 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_MODE_WIDTH 1 /* LDO3_ON_MODE */
+#define WM831X_LDO3_ON_VSEL_MASK 0x001F /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_SHIFT 0 /* LDO3_ON_VSEL - [4:0] */
+#define WM831X_LDO3_ON_VSEL_WIDTH 5 /* LDO3_ON_VSEL - [4:0] */
+
+/*
+ * R16496 (0x4070) - LDO3 SLEEP Control
+ */
+#define WM831X_LDO3_SLP_SLOT_MASK 0xE000 /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_SHIFT 13 /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_SLOT_WIDTH 3 /* LDO3_SLP_SLOT - [15:13] */
+#define WM831X_LDO3_SLP_MODE 0x0100 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_MASK 0x0100 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_SHIFT 8 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_MODE_WIDTH 1 /* LDO3_SLP_MODE */
+#define WM831X_LDO3_SLP_VSEL_MASK 0x001F /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_SHIFT 0 /* LDO3_SLP_VSEL - [4:0] */
+#define WM831X_LDO3_SLP_VSEL_WIDTH 5 /* LDO3_SLP_VSEL - [4:0] */
+
+/*
+ * R16497 (0x4071) - LDO4 Control
+ */
+#define WM831X_LDO4_ERR_ACT_MASK 0xC000 /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_SHIFT 14 /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_ERR_ACT_WIDTH 2 /* LDO4_ERR_ACT - [15:14] */
+#define WM831X_LDO4_HWC_SRC_MASK 0x1800 /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_SHIFT 11 /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_SRC_WIDTH 2 /* LDO4_HWC_SRC - [12:11] */
+#define WM831X_LDO4_HWC_VSEL 0x0400 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_MASK 0x0400 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_SHIFT 10 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_VSEL_WIDTH 1 /* LDO4_HWC_VSEL */
+#define WM831X_LDO4_HWC_MODE_MASK 0x0300 /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_SHIFT 8 /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_HWC_MODE_WIDTH 2 /* LDO4_HWC_MODE - [9:8] */
+#define WM831X_LDO4_FLT 0x0080 /* LDO4_FLT */
+#define WM831X_LDO4_FLT_MASK 0x0080 /* LDO4_FLT */
+#define WM831X_LDO4_FLT_SHIFT 7 /* LDO4_FLT */
+#define WM831X_LDO4_FLT_WIDTH 1 /* LDO4_FLT */
+#define WM831X_LDO4_SWI 0x0040 /* LDO4_SWI */
+#define WM831X_LDO4_SWI_MASK 0x0040 /* LDO4_SWI */
+#define WM831X_LDO4_SWI_SHIFT 6 /* LDO4_SWI */
+#define WM831X_LDO4_SWI_WIDTH 1 /* LDO4_SWI */
+#define WM831X_LDO4_LP_MODE 0x0001 /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_MASK 0x0001 /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_SHIFT 0 /* LDO4_LP_MODE */
+#define WM831X_LDO4_LP_MODE_WIDTH 1 /* LDO4_LP_MODE */
+
+/*
+ * R16498 (0x4072) - LDO4 ON Control
+ */
+#define WM831X_LDO4_ON_SLOT_MASK 0xE000 /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_SHIFT 13 /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_SLOT_WIDTH 3 /* LDO4_ON_SLOT - [15:13] */
+#define WM831X_LDO4_ON_MODE 0x0100 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_MASK 0x0100 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_SHIFT 8 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_MODE_WIDTH 1 /* LDO4_ON_MODE */
+#define WM831X_LDO4_ON_VSEL_MASK 0x001F /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_SHIFT 0 /* LDO4_ON_VSEL - [4:0] */
+#define WM831X_LDO4_ON_VSEL_WIDTH 5 /* LDO4_ON_VSEL - [4:0] */
+
+/*
+ * R16499 (0x4073) - LDO4 SLEEP Control
+ */
+#define WM831X_LDO4_SLP_SLOT_MASK 0xE000 /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_SHIFT 13 /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_SLOT_WIDTH 3 /* LDO4_SLP_SLOT - [15:13] */
+#define WM831X_LDO4_SLP_MODE 0x0100 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_MASK 0x0100 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_SHIFT 8 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_MODE_WIDTH 1 /* LDO4_SLP_MODE */
+#define WM831X_LDO4_SLP_VSEL_MASK 0x001F /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_SHIFT 0 /* LDO4_SLP_VSEL - [4:0] */
+#define WM831X_LDO4_SLP_VSEL_WIDTH 5 /* LDO4_SLP_VSEL - [4:0] */
+
+/*
+ * R16500 (0x4074) - LDO5 Control
+ */
+#define WM831X_LDO5_ERR_ACT_MASK 0xC000 /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_SHIFT 14 /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_ERR_ACT_WIDTH 2 /* LDO5_ERR_ACT - [15:14] */
+#define WM831X_LDO5_HWC_SRC_MASK 0x1800 /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_SHIFT 11 /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_SRC_WIDTH 2 /* LDO5_HWC_SRC - [12:11] */
+#define WM831X_LDO5_HWC_VSEL 0x0400 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_MASK 0x0400 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_SHIFT 10 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_VSEL_WIDTH 1 /* LDO5_HWC_VSEL */
+#define WM831X_LDO5_HWC_MODE_MASK 0x0300 /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_SHIFT 8 /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_HWC_MODE_WIDTH 2 /* LDO5_HWC_MODE - [9:8] */
+#define WM831X_LDO5_FLT 0x0080 /* LDO5_FLT */
+#define WM831X_LDO5_FLT_MASK 0x0080 /* LDO5_FLT */
+#define WM831X_LDO5_FLT_SHIFT 7 /* LDO5_FLT */
+#define WM831X_LDO5_FLT_WIDTH 1 /* LDO5_FLT */
+#define WM831X_LDO5_SWI 0x0040 /* LDO5_SWI */
+#define WM831X_LDO5_SWI_MASK 0x0040 /* LDO5_SWI */
+#define WM831X_LDO5_SWI_SHIFT 6 /* LDO5_SWI */
+#define WM831X_LDO5_SWI_WIDTH 1 /* LDO5_SWI */
+#define WM831X_LDO5_LP_MODE 0x0001 /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_MASK 0x0001 /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_SHIFT 0 /* LDO5_LP_MODE */
+#define WM831X_LDO5_LP_MODE_WIDTH 1 /* LDO5_LP_MODE */
+
+/*
+ * R16501 (0x4075) - LDO5 ON Control
+ */
+#define WM831X_LDO5_ON_SLOT_MASK 0xE000 /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_SHIFT 13 /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_SLOT_WIDTH 3 /* LDO5_ON_SLOT - [15:13] */
+#define WM831X_LDO5_ON_MODE 0x0100 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_MASK 0x0100 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_SHIFT 8 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_MODE_WIDTH 1 /* LDO5_ON_MODE */
+#define WM831X_LDO5_ON_VSEL_MASK 0x001F /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_SHIFT 0 /* LDO5_ON_VSEL - [4:0] */
+#define WM831X_LDO5_ON_VSEL_WIDTH 5 /* LDO5_ON_VSEL - [4:0] */
+
+/*
+ * R16502 (0x4076) - LDO5 SLEEP Control
+ */
+#define WM831X_LDO5_SLP_SLOT_MASK 0xE000 /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_SHIFT 13 /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_SLOT_WIDTH 3 /* LDO5_SLP_SLOT - [15:13] */
+#define WM831X_LDO5_SLP_MODE 0x0100 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_MASK 0x0100 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_SHIFT 8 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_MODE_WIDTH 1 /* LDO5_SLP_MODE */
+#define WM831X_LDO5_SLP_VSEL_MASK 0x001F /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_SHIFT 0 /* LDO5_SLP_VSEL - [4:0] */
+#define WM831X_LDO5_SLP_VSEL_WIDTH 5 /* LDO5_SLP_VSEL - [4:0] */
+
+/*
+ * R16503 (0x4077) - LDO6 Control
+ */
+#define WM831X_LDO6_ERR_ACT_MASK 0xC000 /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_SHIFT 14 /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_ERR_ACT_WIDTH 2 /* LDO6_ERR_ACT - [15:14] */
+#define WM831X_LDO6_HWC_SRC_MASK 0x1800 /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_SHIFT 11 /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_SRC_WIDTH 2 /* LDO6_HWC_SRC - [12:11] */
+#define WM831X_LDO6_HWC_VSEL 0x0400 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_MASK 0x0400 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_SHIFT 10 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_VSEL_WIDTH 1 /* LDO6_HWC_VSEL */
+#define WM831X_LDO6_HWC_MODE_MASK 0x0300 /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_SHIFT 8 /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_HWC_MODE_WIDTH 2 /* LDO6_HWC_MODE - [9:8] */
+#define WM831X_LDO6_FLT 0x0080 /* LDO6_FLT */
+#define WM831X_LDO6_FLT_MASK 0x0080 /* LDO6_FLT */
+#define WM831X_LDO6_FLT_SHIFT 7 /* LDO6_FLT */
+#define WM831X_LDO6_FLT_WIDTH 1 /* LDO6_FLT */
+#define WM831X_LDO6_SWI 0x0040 /* LDO6_SWI */
+#define WM831X_LDO6_SWI_MASK 0x0040 /* LDO6_SWI */
+#define WM831X_LDO6_SWI_SHIFT 6 /* LDO6_SWI */
+#define WM831X_LDO6_SWI_WIDTH 1 /* LDO6_SWI */
+#define WM831X_LDO6_LP_MODE 0x0001 /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_MASK 0x0001 /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_SHIFT 0 /* LDO6_LP_MODE */
+#define WM831X_LDO6_LP_MODE_WIDTH 1 /* LDO6_LP_MODE */
+
+/*
+ * R16504 (0x4078) - LDO6 ON Control
+ */
+#define WM831X_LDO6_ON_SLOT_MASK 0xE000 /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_SHIFT 13 /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_SLOT_WIDTH 3 /* LDO6_ON_SLOT - [15:13] */
+#define WM831X_LDO6_ON_MODE 0x0100 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_MASK 0x0100 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_SHIFT 8 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_MODE_WIDTH 1 /* LDO6_ON_MODE */
+#define WM831X_LDO6_ON_VSEL_MASK 0x001F /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_SHIFT 0 /* LDO6_ON_VSEL - [4:0] */
+#define WM831X_LDO6_ON_VSEL_WIDTH 5 /* LDO6_ON_VSEL - [4:0] */
+
+/*
+ * R16505 (0x4079) - LDO6 SLEEP Control
+ */
+#define WM831X_LDO6_SLP_SLOT_MASK 0xE000 /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_SHIFT 13 /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_SLOT_WIDTH 3 /* LDO6_SLP_SLOT - [15:13] */
+#define WM831X_LDO6_SLP_MODE 0x0100 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_MASK 0x0100 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_SHIFT 8 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_MODE_WIDTH 1 /* LDO6_SLP_MODE */
+#define WM831X_LDO6_SLP_VSEL_MASK 0x001F /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_SHIFT 0 /* LDO6_SLP_VSEL - [4:0] */
+#define WM831X_LDO6_SLP_VSEL_WIDTH 5 /* LDO6_SLP_VSEL - [4:0] */
+
+/*
+ * R16506 (0x407A) - LDO7 Control
+ */
+#define WM831X_LDO7_ERR_ACT_MASK 0xC000 /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_SHIFT 14 /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_ERR_ACT_WIDTH 2 /* LDO7_ERR_ACT - [15:14] */
+#define WM831X_LDO7_HWC_SRC_MASK 0x1800 /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_SHIFT 11 /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_SRC_WIDTH 2 /* LDO7_HWC_SRC - [12:11] */
+#define WM831X_LDO7_HWC_VSEL 0x0400 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_MASK 0x0400 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_SHIFT 10 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_VSEL_WIDTH 1 /* LDO7_HWC_VSEL */
+#define WM831X_LDO7_HWC_MODE_MASK 0x0300 /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_SHIFT 8 /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_HWC_MODE_WIDTH 2 /* LDO7_HWC_MODE - [9:8] */
+#define WM831X_LDO7_FLT 0x0080 /* LDO7_FLT */
+#define WM831X_LDO7_FLT_MASK 0x0080 /* LDO7_FLT */
+#define WM831X_LDO7_FLT_SHIFT 7 /* LDO7_FLT */
+#define WM831X_LDO7_FLT_WIDTH 1 /* LDO7_FLT */
+#define WM831X_LDO7_SWI 0x0040 /* LDO7_SWI */
+#define WM831X_LDO7_SWI_MASK 0x0040 /* LDO7_SWI */
+#define WM831X_LDO7_SWI_SHIFT 6 /* LDO7_SWI */
+#define WM831X_LDO7_SWI_WIDTH 1 /* LDO7_SWI */
+
+/*
+ * R16507 (0x407B) - LDO7 ON Control
+ */
+#define WM831X_LDO7_ON_SLOT_MASK 0xE000 /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_SHIFT 13 /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_SLOT_WIDTH 3 /* LDO7_ON_SLOT - [15:13] */
+#define WM831X_LDO7_ON_MODE 0x0100 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_MASK 0x0100 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_SHIFT 8 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_MODE_WIDTH 1 /* LDO7_ON_MODE */
+#define WM831X_LDO7_ON_VSEL_MASK 0x001F /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_SHIFT 0 /* LDO7_ON_VSEL - [4:0] */
+#define WM831X_LDO7_ON_VSEL_WIDTH 5 /* LDO7_ON_VSEL - [4:0] */
+
+/*
+ * R16508 (0x407C) - LDO7 SLEEP Control
+ */
+#define WM831X_LDO7_SLP_SLOT_MASK 0xE000 /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_SHIFT 13 /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_SLOT_WIDTH 3 /* LDO7_SLP_SLOT - [15:13] */
+#define WM831X_LDO7_SLP_MODE 0x0100 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_MASK 0x0100 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_SHIFT 8 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_MODE_WIDTH 1 /* LDO7_SLP_MODE */
+#define WM831X_LDO7_SLP_VSEL_MASK 0x001F /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_SHIFT 0 /* LDO7_SLP_VSEL - [4:0] */
+#define WM831X_LDO7_SLP_VSEL_WIDTH 5 /* LDO7_SLP_VSEL - [4:0] */
+
+/*
+ * R16509 (0x407D) - LDO8 Control
+ */
+#define WM831X_LDO8_ERR_ACT_MASK 0xC000 /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_SHIFT 14 /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_ERR_ACT_WIDTH 2 /* LDO8_ERR_ACT - [15:14] */
+#define WM831X_LDO8_HWC_SRC_MASK 0x1800 /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_SHIFT 11 /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_SRC_WIDTH 2 /* LDO8_HWC_SRC - [12:11] */
+#define WM831X_LDO8_HWC_VSEL 0x0400 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_MASK 0x0400 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_SHIFT 10 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_VSEL_WIDTH 1 /* LDO8_HWC_VSEL */
+#define WM831X_LDO8_HWC_MODE_MASK 0x0300 /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_SHIFT 8 /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_HWC_MODE_WIDTH 2 /* LDO8_HWC_MODE - [9:8] */
+#define WM831X_LDO8_FLT 0x0080 /* LDO8_FLT */
+#define WM831X_LDO8_FLT_MASK 0x0080 /* LDO8_FLT */
+#define WM831X_LDO8_FLT_SHIFT 7 /* LDO8_FLT */
+#define WM831X_LDO8_FLT_WIDTH 1 /* LDO8_FLT */
+#define WM831X_LDO8_SWI 0x0040 /* LDO8_SWI */
+#define WM831X_LDO8_SWI_MASK 0x0040 /* LDO8_SWI */
+#define WM831X_LDO8_SWI_SHIFT 6 /* LDO8_SWI */
+#define WM831X_LDO8_SWI_WIDTH 1 /* LDO8_SWI */
+
+/*
+ * R16510 (0x407E) - LDO8 ON Control
+ */
+#define WM831X_LDO8_ON_SLOT_MASK 0xE000 /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_SHIFT 13 /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_SLOT_WIDTH 3 /* LDO8_ON_SLOT - [15:13] */
+#define WM831X_LDO8_ON_MODE 0x0100 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_MASK 0x0100 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_SHIFT 8 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_MODE_WIDTH 1 /* LDO8_ON_MODE */
+#define WM831X_LDO8_ON_VSEL_MASK 0x001F /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_SHIFT 0 /* LDO8_ON_VSEL - [4:0] */
+#define WM831X_LDO8_ON_VSEL_WIDTH 5 /* LDO8_ON_VSEL - [4:0] */
+
+/*
+ * R16511 (0x407F) - LDO8 SLEEP Control
+ */
+#define WM831X_LDO8_SLP_SLOT_MASK 0xE000 /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_SHIFT 13 /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_SLOT_WIDTH 3 /* LDO8_SLP_SLOT - [15:13] */
+#define WM831X_LDO8_SLP_MODE 0x0100 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_MASK 0x0100 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_SHIFT 8 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_MODE_WIDTH 1 /* LDO8_SLP_MODE */
+#define WM831X_LDO8_SLP_VSEL_MASK 0x001F /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_SHIFT 0 /* LDO8_SLP_VSEL - [4:0] */
+#define WM831X_LDO8_SLP_VSEL_WIDTH 5 /* LDO8_SLP_VSEL - [4:0] */
+
+/*
+ * R16512 (0x4080) - LDO9 Control
+ */
+#define WM831X_LDO9_ERR_ACT_MASK 0xC000 /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_SHIFT 14 /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_ERR_ACT_WIDTH 2 /* LDO9_ERR_ACT - [15:14] */
+#define WM831X_LDO9_HWC_SRC_MASK 0x1800 /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_SHIFT 11 /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_SRC_WIDTH 2 /* LDO9_HWC_SRC - [12:11] */
+#define WM831X_LDO9_HWC_VSEL 0x0400 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_MASK 0x0400 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_SHIFT 10 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_VSEL_WIDTH 1 /* LDO9_HWC_VSEL */
+#define WM831X_LDO9_HWC_MODE_MASK 0x0300 /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_SHIFT 8 /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_HWC_MODE_WIDTH 2 /* LDO9_HWC_MODE - [9:8] */
+#define WM831X_LDO9_FLT 0x0080 /* LDO9_FLT */
+#define WM831X_LDO9_FLT_MASK 0x0080 /* LDO9_FLT */
+#define WM831X_LDO9_FLT_SHIFT 7 /* LDO9_FLT */
+#define WM831X_LDO9_FLT_WIDTH 1 /* LDO9_FLT */
+#define WM831X_LDO9_SWI 0x0040 /* LDO9_SWI */
+#define WM831X_LDO9_SWI_MASK 0x0040 /* LDO9_SWI */
+#define WM831X_LDO9_SWI_SHIFT 6 /* LDO9_SWI */
+#define WM831X_LDO9_SWI_WIDTH 1 /* LDO9_SWI */
+
+/*
+ * R16513 (0x4081) - LDO9 ON Control
+ */
+#define WM831X_LDO9_ON_SLOT_MASK 0xE000 /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_SHIFT 13 /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_SLOT_WIDTH 3 /* LDO9_ON_SLOT - [15:13] */
+#define WM831X_LDO9_ON_MODE 0x0100 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_MASK 0x0100 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_SHIFT 8 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_MODE_WIDTH 1 /* LDO9_ON_MODE */
+#define WM831X_LDO9_ON_VSEL_MASK 0x001F /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_SHIFT 0 /* LDO9_ON_VSEL - [4:0] */
+#define WM831X_LDO9_ON_VSEL_WIDTH 5 /* LDO9_ON_VSEL - [4:0] */
+
+/*
+ * R16514 (0x4082) - LDO9 SLEEP Control
+ */
+#define WM831X_LDO9_SLP_SLOT_MASK 0xE000 /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_SHIFT 13 /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_SLOT_WIDTH 3 /* LDO9_SLP_SLOT - [15:13] */
+#define WM831X_LDO9_SLP_MODE 0x0100 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_MASK 0x0100 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_SHIFT 8 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_MODE_WIDTH 1 /* LDO9_SLP_MODE */
+#define WM831X_LDO9_SLP_VSEL_MASK 0x001F /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_SHIFT 0 /* LDO9_SLP_VSEL - [4:0] */
+#define WM831X_LDO9_SLP_VSEL_WIDTH 5 /* LDO9_SLP_VSEL - [4:0] */
+
+/*
+ * R16515 (0x4083) - LDO10 Control
+ */
+#define WM831X_LDO10_ERR_ACT_MASK 0xC000 /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_SHIFT 14 /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_ERR_ACT_WIDTH 2 /* LDO10_ERR_ACT - [15:14] */
+#define WM831X_LDO10_HWC_SRC_MASK 0x1800 /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_SHIFT 11 /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_SRC_WIDTH 2 /* LDO10_HWC_SRC - [12:11] */
+#define WM831X_LDO10_HWC_VSEL 0x0400 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_MASK 0x0400 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_SHIFT 10 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_VSEL_WIDTH 1 /* LDO10_HWC_VSEL */
+#define WM831X_LDO10_HWC_MODE_MASK 0x0300 /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_SHIFT 8 /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_HWC_MODE_WIDTH 2 /* LDO10_HWC_MODE - [9:8] */
+#define WM831X_LDO10_FLT 0x0080 /* LDO10_FLT */
+#define WM831X_LDO10_FLT_MASK 0x0080 /* LDO10_FLT */
+#define WM831X_LDO10_FLT_SHIFT 7 /* LDO10_FLT */
+#define WM831X_LDO10_FLT_WIDTH 1 /* LDO10_FLT */
+#define WM831X_LDO10_SWI 0x0040 /* LDO10_SWI */
+#define WM831X_LDO10_SWI_MASK 0x0040 /* LDO10_SWI */
+#define WM831X_LDO10_SWI_SHIFT 6 /* LDO10_SWI */
+#define WM831X_LDO10_SWI_WIDTH 1 /* LDO10_SWI */
+
+/*
+ * R16516 (0x4084) - LDO10 ON Control
+ */
+#define WM831X_LDO10_ON_SLOT_MASK 0xE000 /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_SHIFT 13 /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_SLOT_WIDTH 3 /* LDO10_ON_SLOT - [15:13] */
+#define WM831X_LDO10_ON_MODE 0x0100 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_MASK 0x0100 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_SHIFT 8 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_MODE_WIDTH 1 /* LDO10_ON_MODE */
+#define WM831X_LDO10_ON_VSEL_MASK 0x001F /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_SHIFT 0 /* LDO10_ON_VSEL - [4:0] */
+#define WM831X_LDO10_ON_VSEL_WIDTH 5 /* LDO10_ON_VSEL - [4:0] */
+
+/*
+ * R16517 (0x4085) - LDO10 SLEEP Control
+ */
+#define WM831X_LDO10_SLP_SLOT_MASK 0xE000 /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_SHIFT 13 /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_SLOT_WIDTH 3 /* LDO10_SLP_SLOT - [15:13] */
+#define WM831X_LDO10_SLP_MODE 0x0100 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_MASK 0x0100 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_SHIFT 8 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_MODE_WIDTH 1 /* LDO10_SLP_MODE */
+#define WM831X_LDO10_SLP_VSEL_MASK 0x001F /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_SHIFT 0 /* LDO10_SLP_VSEL - [4:0] */
+#define WM831X_LDO10_SLP_VSEL_WIDTH 5 /* LDO10_SLP_VSEL - [4:0] */
+
+/*
+ * R16519 (0x4087) - LDO11 ON Control
+ */
+#define WM831X_LDO11_ON_SLOT_MASK 0xE000 /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_SHIFT 13 /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_ON_SLOT_WIDTH 3 /* LDO11_ON_SLOT - [15:13] */
+#define WM831X_LDO11_OFFENA 0x1000 /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_MASK 0x1000 /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_SHIFT 12 /* LDO11_OFFENA */
+#define WM831X_LDO11_OFFENA_WIDTH 1 /* LDO11_OFFENA */
+#define WM831X_LDO11_VSEL_SRC 0x0080 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_MASK 0x0080 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_SHIFT 7 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_VSEL_SRC_WIDTH 1 /* LDO11_VSEL_SRC */
+#define WM831X_LDO11_ON_VSEL_MASK 0x000F /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_SHIFT 0 /* LDO11_ON_VSEL - [3:0] */
+#define WM831X_LDO11_ON_VSEL_WIDTH 4 /* LDO11_ON_VSEL - [3:0] */
+
+/*
+ * R16520 (0x4088) - LDO11 SLEEP Control
+ */
+#define WM831X_LDO11_SLP_SLOT_MASK 0xE000 /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_SHIFT 13 /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_SLOT_WIDTH 3 /* LDO11_SLP_SLOT - [15:13] */
+#define WM831X_LDO11_SLP_VSEL_MASK 0x000F /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_SHIFT 0 /* LDO11_SLP_VSEL - [3:0] */
+#define WM831X_LDO11_SLP_VSEL_WIDTH 4 /* LDO11_SLP_VSEL - [3:0] */
+
+/*
* R16526 (0x408E) - Power Good Source 1
*/
#define WM831X_DC4_OK 0x0008 /* DC4_OK */
@@ -586,6 +1168,50 @@
#define WM831X_DC1_OK_SHIFT 0 /* DC1_OK */
#define WM831X_DC1_OK_WIDTH 1 /* DC1_OK */
+/*
+ * R16527 (0x408F) - Power Good Source 2
+ */
+#define WM831X_LDO10_OK 0x0200 /* LDO10_OK */
+#define WM831X_LDO10_OK_MASK 0x0200 /* LDO10_OK */
+#define WM831X_LDO10_OK_SHIFT 9 /* LDO10_OK */
+#define WM831X_LDO10_OK_WIDTH 1 /* LDO10_OK */
+#define WM831X_LDO9_OK 0x0100 /* LDO9_OK */
+#define WM831X_LDO9_OK_MASK 0x0100 /* LDO9_OK */
+#define WM831X_LDO9_OK_SHIFT 8 /* LDO9_OK */
+#define WM831X_LDO9_OK_WIDTH 1 /* LDO9_OK */
+#define WM831X_LDO8_OK 0x0080 /* LDO8_OK */
+#define WM831X_LDO8_OK_MASK 0x0080 /* LDO8_OK */
+#define WM831X_LDO8_OK_SHIFT 7 /* LDO8_OK */
+#define WM831X_LDO8_OK_WIDTH 1 /* LDO8_OK */
+#define WM831X_LDO7_OK 0x0040 /* LDO7_OK */
+#define WM831X_LDO7_OK_MASK 0x0040 /* LDO7_OK */
+#define WM831X_LDO7_OK_SHIFT 6 /* LDO7_OK */
+#define WM831X_LDO7_OK_WIDTH 1 /* LDO7_OK */
+#define WM831X_LDO6_OK 0x0020 /* LDO6_OK */
+#define WM831X_LDO6_OK_MASK 0x0020 /* LDO6_OK */
+#define WM831X_LDO6_OK_SHIFT 5 /* LDO6_OK */
+#define WM831X_LDO6_OK_WIDTH 1 /* LDO6_OK */
+#define WM831X_LDO5_OK 0x0010 /* LDO5_OK */
+#define WM831X_LDO5_OK_MASK 0x0010 /* LDO5_OK */
+#define WM831X_LDO5_OK_SHIFT 4 /* LDO5_OK */
+#define WM831X_LDO5_OK_WIDTH 1 /* LDO5_OK */
+#define WM831X_LDO4_OK 0x0008 /* LDO4_OK */
+#define WM831X_LDO4_OK_MASK 0x0008 /* LDO4_OK */
+#define WM831X_LDO4_OK_SHIFT 3 /* LDO4_OK */
+#define WM831X_LDO4_OK_WIDTH 1 /* LDO4_OK */
+#define WM831X_LDO3_OK 0x0004 /* LDO3_OK */
+#define WM831X_LDO3_OK_MASK 0x0004 /* LDO3_OK */
+#define WM831X_LDO3_OK_SHIFT 2 /* LDO3_OK */
+#define WM831X_LDO3_OK_WIDTH 1 /* LDO3_OK */
+#define WM831X_LDO2_OK 0x0002 /* LDO2_OK */
+#define WM831X_LDO2_OK_MASK 0x0002 /* LDO2_OK */
+#define WM831X_LDO2_OK_SHIFT 1 /* LDO2_OK */
+#define WM831X_LDO2_OK_WIDTH 1 /* LDO2_OK */
+#define WM831X_LDO1_OK 0x0001 /* LDO1_OK */
+#define WM831X_LDO1_OK_MASK 0x0001 /* LDO1_OK */
+#define WM831X_LDO1_OK_SHIFT 0 /* LDO1_OK */
+#define WM831X_LDO1_OK_WIDTH 1 /* LDO1_OK */
+
#define WM831X_ISINK_MAX_ISEL 56
extern int wm831x_isinkv_values[WM831X_ISINK_MAX_ISEL];
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH 19/23] regulator: Add WM831x EPE support
2009-07-27 13:46 ` [PATCH 18/22] regulator: Add WM831x EPE support Mark Brown
@ 2009-07-28 14:22 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:22 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of PMICs provide two optional outputs for
controlling external devices during power sequencing, for example
an external regulator. While in essence these are GPIOs the
hardware presents them as DCDCs with very little control so
provide support via the regulator API in that fashion.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
Support missing platform data for the chip as a whole.
drivers/regulator/wm831x-dcdc.c | 88 +++++++++++++++++++++++++++++++++++++++
1 files changed, 88 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index fa5126e..88a7dba 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -613,6 +613,89 @@ static struct platform_driver wm831x_buckp_driver = {
},
};
+/*
+ * External Power Enable
+ *
+ * These aren't actually DCDCs but look like them in hardware so share
+ * code.
+ */
+
+#define WM831X_EPE_BASE 6
+
+static struct regulator_ops wm831x_epe_ops = {
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+ .get_status = wm831x_dcdc_get_status,
+};
+
+static __devinit int wm831x_epe_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->epe);
+ struct wm831x_dcdc *dcdc;
+ int ret;
+
+ dev_dbg(&pdev->dev, "Probing EPE%d\n", id + 1);
+
+ if (pdata == NULL || pdata->epe[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ /* For current parts this is correct; probably need to revisit
+ * in future.
+ */
+ snprintf(dcdc->name, sizeof(dcdc->name), "EPE%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id + WM831X_EPE_BASE; /* Offset in DCDC registers */
+ dcdc->desc.ops = &wm831x_epe_ops;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->epe[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register EPE%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_epe_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_epe_driver = {
+ .probe = wm831x_epe_probe,
+ .remove = __devexit_p(wm831x_epe_remove),
+ .driver = {
+ .name = "wm831x-epe",
+ },
+};
+
static int __init wm831x_dcdc_init(void)
{
int ret;
@@ -624,12 +707,17 @@ static int __init wm831x_dcdc_init(void)
if (ret != 0)
pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+ ret = platform_driver_register(&wm831x_epe_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x EPE driver: %d\n", ret);
+
return 0;
}
subsys_initcall(wm831x_dcdc_init);
static void __exit wm831x_dcdc_exit(void)
{
+ platform_driver_unregister(&wm831x_epe_driver);
platform_driver_unregister(&wm831x_buckp_driver);
platform_driver_unregister(&wm831x_buckv_driver);
}
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH] regulator: Add WM831x DC-DC boost convertor support
2009-07-27 13:46 ` [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support Mark Brown
@ 2009-07-28 14:23 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:23 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of PMICs include a single DC-DC boost convertor.
This adds basic support for this convertor.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
Support missing platform data for the chip as a whole.
drivers/regulator/wm831x-dcdc.c | 131 +++++++++++++++++++++++++++++++++++++++
1 files changed, 131 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c
index 88a7dba..2eefc1a 100644
--- a/drivers/regulator/wm831x-dcdc.c
+++ b/drivers/regulator/wm831x-dcdc.c
@@ -614,6 +614,132 @@ static struct platform_driver wm831x_buckp_driver = {
};
/*
+ * DCDC boost convertors
+ */
+
+static int wm831x_boostp_get_status(struct regulator_dev *rdev)
+{
+ struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+ int ret;
+
+ /* First, check for errors */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_UV_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & (1 << rdev_get_id(rdev))) {
+ dev_dbg(wm831x->dev, "DCDC%d under voltage\n",
+ rdev_get_id(rdev) + 1);
+ return REGULATOR_STATUS_ERROR;
+ }
+
+ /* Is the regulator on? */
+ ret = wm831x_reg_read(wm831x, WM831X_DCDC_STATUS);
+ if (ret < 0)
+ return ret;
+ if (ret & (1 << rdev_get_id(rdev)))
+ return REGULATOR_STATUS_ON;
+ else
+ return REGULATOR_STATUS_OFF;
+}
+
+static struct regulator_ops wm831x_boostp_ops = {
+ .get_status = wm831x_boostp_get_status,
+
+ .is_enabled = wm831x_dcdc_is_enabled,
+ .enable = wm831x_dcdc_enable,
+ .disable = wm831x_dcdc_disable,
+};
+
+static __devinit int wm831x_boostp_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ int id = pdev->id % ARRAY_SIZE(pdata->dcdc);
+ struct wm831x_dcdc *dcdc;
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing DCDC%d\n", id + 1);
+
+ if (pdata == NULL || pdata->dcdc[id] == NULL)
+ return -ENODEV;
+
+ dcdc = kzalloc(sizeof(struct wm831x_dcdc), GFP_KERNEL);
+ if (dcdc == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ dcdc->wm831x = wm831x;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ dcdc->base = res->start;
+
+ snprintf(dcdc->name, sizeof(dcdc->name), "DCDC%d", id + 1);
+ dcdc->desc.name = dcdc->name;
+ dcdc->desc.id = id;
+ dcdc->desc.type = REGULATOR_VOLTAGE;
+ dcdc->desc.ops = &wm831x_boostp_ops;
+ dcdc->desc.owner = THIS_MODULE;
+
+ dcdc->regulator = regulator_register(&dcdc->desc, &pdev->dev,
+ pdata->dcdc[id], dcdc);
+ if (IS_ERR(dcdc->regulator)) {
+ ret = PTR_ERR(dcdc->regulator);
+ dev_err(wm831x->dev, "Failed to register DCDC%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq_byname(pdev, "UV");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_dcdc_uv_irq,
+ IRQF_TRIGGER_RISING, dcdc->name,
+ dcdc);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request UV IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, dcdc);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(dcdc->regulator);
+err:
+ kfree(dcdc);
+ return ret;
+}
+
+static __devexit int wm831x_boostp_remove(struct platform_device *pdev)
+{
+ struct wm831x_dcdc *dcdc = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = dcdc->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq_byname(pdev, "UV"), dcdc);
+ regulator_unregister(dcdc->regulator);
+ kfree(dcdc);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_boostp_driver = {
+ .probe = wm831x_boostp_probe,
+ .remove = __devexit_p(wm831x_boostp_remove),
+ .driver = {
+ .name = "wm831x-boostp",
+ },
+};
+
+/*
* External Power Enable
*
* These aren't actually DCDCs but look like them in hardware so share
@@ -707,6 +833,10 @@ static int __init wm831x_dcdc_init(void)
if (ret != 0)
pr_err("Failed to register WM831x BUCKP driver: %d\n", ret);
+ ret = platform_driver_register(&wm831x_boostp_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x BOOST driver: %d\n", ret);
+
ret = platform_driver_register(&wm831x_epe_driver);
if (ret != 0)
pr_err("Failed to register WM831x EPE driver: %d\n", ret);
@@ -718,6 +848,7 @@ subsys_initcall(wm831x_dcdc_init);
static void __exit wm831x_dcdc_exit(void)
{
platform_driver_unregister(&wm831x_epe_driver);
+ platform_driver_unregister(&wm831x_boostp_driver);
platform_driver_unregister(&wm831x_buckp_driver);
platform_driver_unregister(&wm831x_buckv_driver);
}
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH] regulator: Add WM831x ISINK support
2009-07-27 13:46 ` [PATCH 20/22] regulator: Add WM831x ISINK support Mark Brown
@ 2009-07-28 14:23 ` Mark Brown
0 siblings, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:23 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: linux-kernel, Mark Brown, Liam Girdwood
The WM831x series of PMICs provide two constant current sinks
designed to drive strings of serially connected LEDs for applications
such as backlights. This driver adds support for those regulators.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
---
Support missing platform data for the core chip.
drivers/regulator/Makefile | 1 +
drivers/regulator/wm831x-isink.c | 260 ++++++++++++++++++++++++++++++++++++++
2 files changed, 261 insertions(+), 0 deletions(-)
create mode 100644 drivers/regulator/wm831x-isink.c
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index a0a635f..3a4cdf5 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_TWL4030) += twl4030-regulator.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
diff --git a/drivers/regulator/wm831x-isink.c b/drivers/regulator/wm831x-isink.c
new file mode 100644
index 0000000..1d8d987
--- /dev/null
+++ b/drivers/regulator/wm831x-isink.c
@@ -0,0 +1,260 @@
+/*
+ * wm831x-isink.c -- Current sink driver for the WM831x series
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/regulator.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+#define WM831X_ISINK_MAX_NAME 7
+
+struct wm831x_isink {
+ char name[WM831X_ISINK_MAX_NAME];
+ struct regulator_desc desc;
+ int reg;
+ struct wm831x *wm831x;
+ struct regulator_dev *regulator;
+};
+
+static int wm831x_isink_enable(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ /* We have a two stage enable: first start the ISINK... */
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA,
+ WM831X_CS1_ENA);
+ if (ret != 0)
+ return ret;
+
+ /* ...then enable drive */
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE,
+ WM831X_CS1_DRIVE);
+ if (ret != 0)
+ wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+
+ return ret;
+
+}
+
+static int wm831x_isink_disable(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_DRIVE, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, isink->reg, WM831X_CS1_ENA, 0);
+ if (ret < 0)
+ return ret;
+
+ return ret;
+
+}
+
+static int wm831x_isink_is_enabled(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, isink->reg);
+ if (ret < 0)
+ return ret;
+
+ if ((ret & (WM831X_CS1_ENA | WM831X_CS1_DRIVE)) ==
+ (WM831X_CS1_ENA | WM831X_CS1_DRIVE))
+ return 1;
+ else
+ return 0;
+}
+
+static int wm831x_isink_set_current(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_isinkv_values); i++) {
+ int val = wm831x_isinkv_values[i];
+ if (min_uA >= val && val <= max_uA) {
+ ret = wm831x_set_bits(wm831x, isink->reg,
+ WM831X_CS1_ISEL_MASK, i);
+ return ret;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int wm831x_isink_get_current(struct regulator_dev *rdev)
+{
+ struct wm831x_isink *isink = rdev_get_drvdata(rdev);
+ struct wm831x *wm831x = isink->wm831x;
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, isink->reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= WM831X_CS1_ISEL_MASK;
+ if (ret > WM831X_ISINK_MAX_ISEL)
+ ret = WM831X_ISINK_MAX_ISEL;
+
+ return wm831x_isinkv_values[ret];
+}
+
+static struct regulator_ops wm831x_isink_ops = {
+ .is_enabled = wm831x_isink_is_enabled,
+ .enable = wm831x_isink_enable,
+ .disable = wm831x_isink_disable,
+ .set_current_limit = wm831x_isink_set_current,
+ .get_current_limit = wm831x_isink_get_current,
+};
+
+static irqreturn_t wm831x_isink_irq(int irq, void *data)
+{
+ struct wm831x_isink *isink = data;
+
+ regulator_notifier_call_chain(isink->regulator,
+ REGULATOR_EVENT_OVER_CURRENT,
+ NULL);
+
+ return IRQ_HANDLED;
+}
+
+
+static __devinit int wm831x_isink_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *pdata = wm831x->dev->platform_data;
+ struct wm831x_isink *isink;
+ int id = pdev->id % ARRAY_SIZE(pdata->isink);
+ struct resource *res;
+ int ret, irq;
+
+ dev_dbg(&pdev->dev, "Probing ISINK%d\n", id + 1);
+
+ if (pdata == NULL || pdata->isink[id] == NULL)
+ return -ENODEV;
+
+ isink = kzalloc(sizeof(struct wm831x_isink), GFP_KERNEL);
+ if (isink == NULL) {
+ dev_err(&pdev->dev, "Unable to allocate private data\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+ isink->reg = res->start;
+
+ /* For current parts this is correct; probably need to revisit
+ * in future.
+ */
+ snprintf(isink->name, sizeof(isink->name), "ISINK%d", id + 1);
+ isink->desc.name = isink->name;
+ isink->desc.id = id;
+ isink->desc.ops = &wm831x_isink_ops;
+ isink->desc.type = REGULATOR_CURRENT;
+ isink->desc.owner = THIS_MODULE;
+
+ isink->regulator = regulator_register(&isink->desc, &pdev->dev,
+ pdata->isink[id], isink);
+ if (IS_ERR(isink->regulator)) {
+ ret = PTR_ERR(isink->regulator);
+ dev_err(wm831x->dev, "Failed to register ISINK%d: %d\n",
+ id + 1, ret);
+ goto err;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ ret = wm831x_request_irq(wm831x, irq, wm831x_isink_irq,
+ IRQF_TRIGGER_RISING, isink->name,
+ isink);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request ISINK IRQ %d: %d\n",
+ irq, ret);
+ goto err_regulator;
+ }
+
+ platform_set_drvdata(pdev, isink);
+
+ return 0;
+
+err_regulator:
+ regulator_unregister(isink->regulator);
+err:
+ kfree(isink);
+ return ret;
+}
+
+static __devexit int wm831x_isink_remove(struct platform_device *pdev)
+{
+ struct wm831x_isink *isink = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = isink->wm831x;
+
+ wm831x_free_irq(wm831x, platform_get_irq(pdev, 0), isink);
+
+ regulator_unregister(isink->regulator);
+ kfree(isink);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_isink_driver = {
+ .probe = wm831x_isink_probe,
+ .remove = __devexit_p(wm831x_isink_remove),
+ .driver = {
+ .name = "wm831x-isink",
+ },
+};
+
+static int __init wm831x_isink_init(void)
+{
+ int ret;
+ ret = platform_driver_register(&wm831x_isink_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM831x ISINK driver: %d\n", ret);
+
+ return ret;
+}
+subsys_initcall(wm831x_isink_init);
+
+static void __exit wm831x_isink_exit(void)
+{
+ platform_driver_unregister(&wm831x_isink_driver);
+}
+module_exit(wm831x_isink_exit);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown");
+MODULE_DESCRIPTION("WM831x current sink driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-isink");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH] hwmon: WM831x PMIC hardware monitoring driver
2009-07-28 14:11 ` [PATCH] " Mark Brown
@ 2009-07-28 14:26 ` Jean Delvare
2009-07-28 14:50 ` Mark Brown
0 siblings, 1 reply; 46+ messages in thread
From: Jean Delvare @ 2009-07-28 14:26 UTC (permalink / raw)
To: Mark Brown; +Cc: Samuel Ortiz, linux-kernel, lm-sensors
Hi Mark,
On Tue, 28 Jul 2009 15:11:00 +0100, Mark Brown wrote:
> This driver adds support for the hardware monitoring features of
> the WM831x PMICs to the hwmon API. Monitoring is provided for
> the system voltages supported natively by the WM831x, the chip
> temperature, the battery temperature and the auxiliary inputs
> of the WM831x.
>
> Currently no alarms are supported, though digital comparators on
> the WM831x devices would allow these to be provided.
>
> Since the auxiliary and battery temperature input scaling depends
> on the system configuration the value is reported as a voltage to
> userspace.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> Cc: Jean Delvare <khali@linux-fr.org>
> Cc: lm-sensors@lm-sensors.org
> ---
>
> Changes from review from Jean:
> - Hook up backup battery monitoring.
> - Use DIV_ROUND_CLOSEST().
> - Report battery temperature as a voltage.
> - Various formatting cleanups.
>
> Documentation/hwmon/wm831x | 37 +++++++
> drivers/hwmon/Kconfig | 11 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/wm831x-hwmon.c | 240 ++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 289 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/hwmon/wm831x
> create mode 100644 drivers/hwmon/wm831x-hwmon.c
>
> diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
> new file mode 100644
> index 0000000..ab10068
> --- /dev/null
> +++ b/Documentation/hwmon/wm831x
> @@ -0,0 +1,37 @@
> +Kernel driver wm831x-hwmon
> +==========================
> +
> +Supported chips:
> + * Wolfson Microelectronics WM831x PMICs
> + Prefix: 'wm831x'
> + Datasheet:
> + http://www.wolfsonmicro.com/products/WM8310
> + http://www.wolfsonmicro.com/products/WM8311
> + http://www.wolfsonmicro.com/products/WM8312
> +
> +Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
> +
> +Description
> +-----------
> +
> +The WM831x series of PMICs include an AUXADC which can be used to
> +monitor a range of system operating parameters, including the voltages
> +of the major supplies within the system. Currently the driver provides
> +reporting of all the input values but does not provide any alarms.
> +
> +Voltage Monitoring
> +------------------
> +
> +Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465
> +times the ADC value.
> +
> +Temperature Monitoring
> +----------------------
> +
> +Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
> +are available. The chip temperature is calculated as:
> +
> + Degrees celsius = (512.18 - data) / 1.0983
> +
> +while the battery temperature calculation will depend on the NTC
> +termistor component.
I think the correct spelling is thermistor.
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8d17135..ed85909 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -930,6 +930,17 @@ config SENSORS_W83627EHF
> This driver can also be built as a module. If so, the module
> will be called w83627ehf.
>
> +config SENSORS_WM831X
> + tristate "WM831x PMICs"
> + depends on MFD_WM831X
> + help
> + If you say yes here you get support for the hardware
> + monitoring functionality of the Wolfson Microelectronics
> + WM831x series of PMICs.
> +
> + This driver can also be built as a module. If so, the module
> + will be called wm831x-hwmon.
> +
> config SENSORS_WM8350
> tristate "Wolfson Microelectronics WM835x"
> depends on MFD_WM8350
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 6126257..a7e7eb7 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
> obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
> obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
> obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
> +obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
> obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
>
> ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
> diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
> new file mode 100644
> index 0000000..a3a9b78
> --- /dev/null
> +++ b/drivers/hwmon/wm831x-hwmon.c
> @@ -0,0 +1,240 @@
> +/*
> + * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
> + * hardware monitoring features.
> + *
> + * Copyright (C) 2009 Wolfson Microelectronics plc
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License v2 as published by the
> + * Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program; if not, write to the Free Software Foundation, Inc.,
> + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +
> +#include <linux/mfd/wm831x/core.h>
> +#include <linux/mfd/wm831x/auxadc.h>
> +
> +struct wm831x_hwmon {
> + struct wm831x *wm831x;
> + struct device *classdev;
> +};
> +
> +static ssize_t show_name(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + return sprintf(buf, "wm831x\n");
> +}
> +
> +static const char *input_names[] = {
> + [WM831X_AUX_SYSVDD] = "SYSVDD",
> + [WM831X_AUX_USB] = "USB",
> + [WM831X_AUX_BKUP_BATT] = "Backup battery",
> + [WM831X_AUX_BATT] = "Battery",
> + [WM831X_AUX_WALL] = "WALL",
> + [WM831X_AUX_CHIP_TEMP] = "PMIC",
> + [WM831X_AUX_BATT_TEMP] = "Battery",
> +};
> +
> +
> +static ssize_t show_voltage(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(attr)->index;
> + int ret;
> +
> + ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
> + if (ret < 0)
> + return ret;
> +
> + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
> +}
> +
> +static ssize_t show_chip_temp(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(attr)->index;
> + int ret;
> +
> + ret = wm831x_auxadc_read(hwmon->wm831x, channel);
> + if (ret < 0)
> + return ret;
> +
> + /* Degrees celsius = (512.18-ret) / 1.0983 */
> + ret = 512180 - (ret * 1000);
> + ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
> +
> + return sprintf(buf, "%d\n", ret);
> +}
> +
> +static ssize_t show_batt_temp(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
> + int channel = to_sensor_dev_attr(attr)->index;
> + int ret;
> +
> + ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
> + if (ret < 0)
> + return ret;
> +
> + /* The conversion depends on the battery, leave to userspace but
> + * report as voltage for ABI reasons. */
> + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
> +}
If I am not mistaken, the above function is an exact copy of
show_voltage(), so you might as well use it?
> +
> +static ssize_t show_label(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + int channel = to_sensor_dev_attr(attr)->index;
> +
> + return sprintf(buf, "%s\n", input_names[channel]);
> +}
> +
> +#define WM831X_VOLTAGE(id, name) \
> + static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
> + NULL, name)
> +
> +#define WM831X_NAMED_VOLTAGE(id, name) \
> + WM831X_VOLTAGE(id, name); \
> + static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
> + NULL, name)
> +
> +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
> +
> +WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
> +WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
> +WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
> +WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
> +
> +WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
> +WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
> +WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
> +WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
> +WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT);
> +
> +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
> + WM831X_AUX_CHIP_TEMP);
> +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
> + WM831X_AUX_CHIP_TEMP);
> +static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_batt_temp, NULL,
> + WM831X_AUX_BATT_TEMP);
> +static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
> + WM831X_AUX_BATT_TEMP);
> +
> +static struct attribute *wm831x_attributes[] = {
> + &dev_attr_name.attr,
> +
> + &sensor_dev_attr_in0_input.dev_attr.attr,
> + &sensor_dev_attr_in1_input.dev_attr.attr,
> + &sensor_dev_attr_in2_input.dev_attr.attr,
> + &sensor_dev_attr_in3_input.dev_attr.attr,
> +
> + &sensor_dev_attr_in4_input.dev_attr.attr,
> + &sensor_dev_attr_in4_label.dev_attr.attr,
> + &sensor_dev_attr_in5_input.dev_attr.attr,
> + &sensor_dev_attr_in5_label.dev_attr.attr,
> + &sensor_dev_attr_in6_input.dev_attr.attr,
> + &sensor_dev_attr_in6_label.dev_attr.attr,
> + &sensor_dev_attr_in7_input.dev_attr.attr,
> + &sensor_dev_attr_in7_label.dev_attr.attr,
> + &sensor_dev_attr_in8_input.dev_attr.attr,
> + &sensor_dev_attr_in8_label.dev_attr.attr,
> +
> + &sensor_dev_attr_temp1_input.dev_attr.attr,
> + &sensor_dev_attr_temp1_label.dev_attr.attr,
> + &sensor_dev_attr_temp2_input.dev_attr.attr,
> + &sensor_dev_attr_temp2_label.dev_attr.attr,
> +
> + NULL
> +};
> +
> +static const struct attribute_group wm831x_attr_group = {
> + .attrs = wm831x_attributes,
> +};
> +
> +static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
> +{
> + struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
> + struct wm831x_hwmon *hwmon;
> + int ret;
> +
> + hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
> + if (!hwmon)
> + return -ENOMEM;
> +
> + hwmon->wm831x = wm831x;
> +
> + ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
> + if (ret)
> + goto err;
> +
> + hwmon->classdev = hwmon_device_register(&pdev->dev);
> + if (IS_ERR(hwmon->classdev)) {
> + ret = PTR_ERR(hwmon->classdev);
> + goto err_sysfs;
> + }
> +
> + platform_set_drvdata(pdev, hwmon);
> +
> + return 0;
> +
> +err_sysfs:
> + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
> +err:
> + kfree(hwmon);
> + return ret;
> +}
> +
> +static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
> +{
> + struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
> +
> + hwmon_device_unregister(hwmon->classdev);
> + sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
> + kfree(hwmon);
> + platform_set_drvdata(pdev, NULL);
Preferably the other way around (yes I am nitpicking ;))
> +
> + return 0;
> +}
> +
> +static struct platform_driver wm831x_hwmon_driver = {
> + .probe = wm831x_hwmon_probe,
> + .remove = __devexit_p(wm831x_hwmon_remove),
> + .driver = {
> + .name = "wm831x-hwmon",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init wm831x_hwmon_init(void)
> +{
> + return platform_driver_register(&wm831x_hwmon_driver);
> +}
> +module_init(wm831x_hwmon_init);
> +
> +static void __exit wm831x_hwmon_exit(void)
> +{
> + platform_driver_unregister(&wm831x_hwmon_driver);
> +}
> +module_exit(wm831x_hwmon_exit);
> +
> +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
> +MODULE_DESCRIPTION("WM831x Hardware Monitoring");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:wm831x-hwmon");
All the rest looks good to me now, so:
Acked-by: Jean Delvare <khali@linux-fr.org>
And as I said before for the wm8350-hwmon driver: I can pick this patch
and push it to Linux in 2.6.32 if you want, but if you want it to take
a different route this is equally fine with me. Just tell me if you
want me to pick it.
--
Jean Delvare
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH] hwmon: WM831x PMIC hardware monitoring driver
2009-07-28 14:26 ` Jean Delvare
@ 2009-07-28 14:50 ` Mark Brown
2009-07-28 14:52 ` Mark Brown
2009-08-04 11:33 ` Samuel Ortiz
0 siblings, 2 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:50 UTC (permalink / raw)
To: Jean Delvare; +Cc: Samuel Ortiz, linux-kernel, lm-sensors
On Tue, Jul 28, 2009 at 04:26:58PM +0200, Jean Delvare wrote:
> On Tue, 28 Jul 2009 15:11:00 +0100, Mark Brown wrote:
> > +static ssize_t show_batt_temp(struct device *dev,
> > + struct device_attribute *attr, char *buf)
> > +{
...
> > + /* The conversion depends on the battery, leave to userspace but
> > + * report as voltage for ABI reasons. */
> > + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
> > +}
> If I am not mistaken, the above function is an exact copy of
> show_voltage(), so you might as well use it?
It is now, yes, except for the comment explaining why we're reporting as
a voltage.
> All the rest looks good to me now, so:
> Acked-by: Jean Delvare <khali@linux-fr.org>
> And as I said before for the wm8350-hwmon driver: I can pick this patch
> and push it to Linux in 2.6.32 if you want, but if you want it to take
> a different route this is equally fine with me. Just tell me if you
> want me to pick it.
I'm more than happy for you to take both - the only reason that I asked
you to hold off on the wm8350 patch originally was that I knew I was
going to be releasing this driver and there would be collisions with the
Kconfig stuff which was due to be released very soon.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH] hwmon: WM831x PMIC hardware monitoring driver
2009-07-28 14:50 ` Mark Brown
@ 2009-07-28 14:52 ` Mark Brown
2009-08-04 11:33 ` Samuel Ortiz
1 sibling, 0 replies; 46+ messages in thread
From: Mark Brown @ 2009-07-28 14:52 UTC (permalink / raw)
To: Jean Delvare
Cc: Samuel Ortiz, linux-kernel, Mark Brown, Jean Delvare, lm-sensors
This driver adds support for the hardware monitoring features of
the WM831x PMICs to the hwmon API. Monitoring is provided for
the system voltages supported natively by the WM831x, the chip
temperature, the battery temperature and the auxiliary inputs
of the WM831x.
Currently no alarms are supported, though digital comparators on
the WM831x devices would allow these to be provided.
Since the auxiliary and battery temperature input scaling depends
on the system configuration the value is reported as a voltage to
userspace.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: lm-sensors@lm-sensors.org
---
Fix typo, ordering of NULL of driver data and factor out battery
temperature report.
Documentation/hwmon/wm831x | 37 +++++++
drivers/hwmon/Kconfig | 11 ++
drivers/hwmon/Makefile | 1 +
drivers/hwmon/wm831x-hwmon.c | 226 ++++++++++++++++++++++++++++++++++++++++++
4 files changed, 275 insertions(+), 0 deletions(-)
create mode 100644 Documentation/hwmon/wm831x
create mode 100644 drivers/hwmon/wm831x-hwmon.c
diff --git a/Documentation/hwmon/wm831x b/Documentation/hwmon/wm831x
new file mode 100644
index 0000000..24f47d8
--- /dev/null
+++ b/Documentation/hwmon/wm831x
@@ -0,0 +1,37 @@
+Kernel driver wm831x-hwmon
+==========================
+
+Supported chips:
+ * Wolfson Microelectronics WM831x PMICs
+ Prefix: 'wm831x'
+ Datasheet:
+ http://www.wolfsonmicro.com/products/WM8310
+ http://www.wolfsonmicro.com/products/WM8311
+ http://www.wolfsonmicro.com/products/WM8312
+
+Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
+
+Description
+-----------
+
+The WM831x series of PMICs include an AUXADC which can be used to
+monitor a range of system operating parameters, including the voltages
+of the major supplies within the system. Currently the driver provides
+reporting of all the input values but does not provide any alarms.
+
+Voltage Monitoring
+------------------
+
+Voltages are sampled by a 12 bit ADC. Voltages in milivolts are 1.465
+times the ADC value.
+
+Temperature Monitoring
+----------------------
+
+Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
+are available. The chip temperature is calculated as:
+
+ Degrees celsius = (512.18 - data) / 1.0983
+
+while the battery temperature calculation will depend on the NTC
+thermistor component.
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 8d17135..ed85909 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -930,6 +930,17 @@ config SENSORS_W83627EHF
This driver can also be built as a module. If so, the module
will be called w83627ehf.
+config SENSORS_WM831X
+ tristate "WM831x PMICs"
+ depends on MFD_WM831X
+ help
+ If you say yes here you get support for the hardware
+ monitoring functionality of the Wolfson Microelectronics
+ WM831x series of PMICs.
+
+ This driver can also be built as a module. If so, the module
+ will be called wm831x-hwmon.
+
config SENSORS_WM8350
tristate "Wolfson Microelectronics WM835x"
depends on MFD_WM8350
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 6126257..a7e7eb7 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -90,6 +90,7 @@ obj-$(CONFIG_SENSORS_VT8231) += vt8231.o
obj-$(CONFIG_SENSORS_W83627EHF) += w83627ehf.o
obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o
obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o
+obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
ifeq ($(CONFIG_HWMON_DEBUG_CHIP),y)
diff --git a/drivers/hwmon/wm831x-hwmon.c b/drivers/hwmon/wm831x-hwmon.c
new file mode 100644
index 0000000..c16e9e7
--- /dev/null
+++ b/drivers/hwmon/wm831x-hwmon.c
@@ -0,0 +1,226 @@
+/*
+ * drivers/hwmon/wm831x-hwmon.c - Wolfson Microelectronics WM831x PMIC
+ * hardware monitoring features.
+ *
+ * Copyright (C) 2009 Wolfson Microelectronics plc
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License v2 as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+
+struct wm831x_hwmon {
+ struct wm831x *wm831x;
+ struct device *classdev;
+};
+
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "wm831x\n");
+}
+
+static const char *input_names[] = {
+ [WM831X_AUX_SYSVDD] = "SYSVDD",
+ [WM831X_AUX_USB] = "USB",
+ [WM831X_AUX_BKUP_BATT] = "Backup battery",
+ [WM831X_AUX_BATT] = "Battery",
+ [WM831X_AUX_WALL] = "WALL",
+ [WM831X_AUX_CHIP_TEMP] = "PMIC",
+ [WM831X_AUX_BATT_TEMP] = "Battery",
+};
+
+
+static ssize_t show_voltage(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
+}
+
+static ssize_t show_chip_temp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm831x_hwmon *hwmon = dev_get_drvdata(dev);
+ int channel = to_sensor_dev_attr(attr)->index;
+ int ret;
+
+ ret = wm831x_auxadc_read(hwmon->wm831x, channel);
+ if (ret < 0)
+ return ret;
+
+ /* Degrees celsius = (512.18-ret) / 1.0983 */
+ ret = 512180 - (ret * 1000);
+ ret = DIV_ROUND_CLOSEST(ret * 10000, 10983);
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t show_label(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int channel = to_sensor_dev_attr(attr)->index;
+
+ return sprintf(buf, "%s\n", input_names[channel]);
+}
+
+#define WM831X_VOLTAGE(id, name) \
+ static SENSOR_DEVICE_ATTR(in##id##_input, S_IRUGO, show_voltage, \
+ NULL, name)
+
+#define WM831X_NAMED_VOLTAGE(id, name) \
+ WM831X_VOLTAGE(id, name); \
+ static SENSOR_DEVICE_ATTR(in##id##_label, S_IRUGO, show_label, \
+ NULL, name)
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+
+WM831X_VOLTAGE(0, WM831X_AUX_AUX1);
+WM831X_VOLTAGE(1, WM831X_AUX_AUX2);
+WM831X_VOLTAGE(2, WM831X_AUX_AUX3);
+WM831X_VOLTAGE(3, WM831X_AUX_AUX4);
+
+WM831X_NAMED_VOLTAGE(4, WM831X_AUX_SYSVDD);
+WM831X_NAMED_VOLTAGE(5, WM831X_AUX_USB);
+WM831X_NAMED_VOLTAGE(6, WM831X_AUX_BATT);
+WM831X_NAMED_VOLTAGE(7, WM831X_AUX_WALL);
+WM831X_NAMED_VOLTAGE(8, WM831X_AUX_BKUP_BATT);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_chip_temp, NULL,
+ WM831X_AUX_CHIP_TEMP);
+static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_label, NULL,
+ WM831X_AUX_CHIP_TEMP);
+/* Report as a voltage since conversion depends on external components
+ * and that's what the ABI wants. */
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_voltage, NULL,
+ WM831X_AUX_BATT_TEMP);
+static SENSOR_DEVICE_ATTR(temp2_label, S_IRUGO, show_label, NULL,
+ WM831X_AUX_BATT_TEMP);
+
+static struct attribute *wm831x_attributes[] = {
+ &dev_attr_name.attr,
+
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in3_input.dev_attr.attr,
+
+ &sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_label.dev_attr.attr,
+ &sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_label.dev_attr.attr,
+ &sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_label.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_label.dev_attr.attr,
+ &sensor_dev_attr_in8_input.dev_attr.attr,
+ &sensor_dev_attr_in8_label.dev_attr.attr,
+
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_label.dev_attr.attr,
+ &sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_label.dev_attr.attr,
+
+ NULL
+};
+
+static const struct attribute_group wm831x_attr_group = {
+ .attrs = wm831x_attributes,
+};
+
+static int __devinit wm831x_hwmon_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_hwmon *hwmon;
+ int ret;
+
+ hwmon = kzalloc(sizeof(struct wm831x_hwmon), GFP_KERNEL);
+ if (!hwmon)
+ return -ENOMEM;
+
+ hwmon->wm831x = wm831x;
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &wm831x_attr_group);
+ if (ret)
+ goto err;
+
+ hwmon->classdev = hwmon_device_register(&pdev->dev);
+ if (IS_ERR(hwmon->classdev)) {
+ ret = PTR_ERR(hwmon->classdev);
+ goto err_sysfs;
+ }
+
+ platform_set_drvdata(pdev, hwmon);
+
+ return 0;
+
+err_sysfs:
+ sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+err:
+ kfree(hwmon);
+ return ret;
+}
+
+static int __devexit wm831x_hwmon_remove(struct platform_device *pdev)
+{
+ struct wm831x_hwmon *hwmon = platform_get_drvdata(pdev);
+
+ hwmon_device_unregister(hwmon->classdev);
+ sysfs_remove_group(&pdev->dev.kobj, &wm831x_attr_group);
+ platform_set_drvdata(pdev, NULL);
+ kfree(hwmon);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_hwmon_driver = {
+ .probe = wm831x_hwmon_probe,
+ .remove = __devexit_p(wm831x_hwmon_remove),
+ .driver = {
+ .name = "wm831x-hwmon",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init wm831x_hwmon_init(void)
+{
+ return platform_driver_register(&wm831x_hwmon_driver);
+}
+module_init(wm831x_hwmon_init);
+
+static void __exit wm831x_hwmon_exit(void)
+{
+ platform_driver_unregister(&wm831x_hwmon_driver);
+}
+module_exit(wm831x_hwmon_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x Hardware Monitoring");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-hwmon");
--
1.6.3.3
^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH] hwmon: WM831x PMIC hardware monitoring driver
2009-07-28 14:50 ` Mark Brown
2009-07-28 14:52 ` Mark Brown
@ 2009-08-04 11:33 ` Samuel Ortiz
2009-08-04 11:53 ` Jean Delvare
1 sibling, 1 reply; 46+ messages in thread
From: Samuel Ortiz @ 2009-08-04 11:33 UTC (permalink / raw)
To: Mark Brown; +Cc: Jean Delvare, linux-kernel, lm-sensors
Hi Jean, Mark,
On Tue, Jul 28, 2009 at 03:50:49PM +0100, Mark Brown wrote:
> On Tue, Jul 28, 2009 at 04:26:58PM +0200, Jean Delvare wrote:
> > On Tue, 28 Jul 2009 15:11:00 +0100, Mark Brown wrote:
>
> > > +static ssize_t show_batt_temp(struct device *dev,
> > > + struct device_attribute *attr, char *buf)
> > > +{
>
> ...
>
> > > + /* The conversion depends on the battery, leave to userspace but
> > > + * report as voltage for ABI reasons. */
> > > + return sprintf(buf, "%d\n", DIV_ROUND_CLOSEST(ret, 1000));
> > > +}
>
> > If I am not mistaken, the above function is an exact copy of
> > show_voltage(), so you might as well use it?
>
> It is now, yes, except for the comment explaining why we're reporting as
> a voltage.
>
> > All the rest looks good to me now, so:
>
> > Acked-by: Jean Delvare <khali@linux-fr.org>
>
> > And as I said before for the wm8350-hwmon driver: I can pick this patch
> > and push it to Linux in 2.6.32 if you want, but if you want it to take
> > a different route this is equally fine with me. Just tell me if you
> > want me to pick it.
>
> I'm more than happy for you to take both - the only reason that I asked
> you to hold off on the wm8350 patch originally was that I knew I was
> going to be releasing this driver and there would be collisions with the
> Kconfig stuff which was due to be released very soon.
I applied both patches to my for-next branch. Jean, if you prefer them to go
through your tree, please go ahead and I'll remove them from mine.
Cheers,
Samuel.
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH 0/22] WM831x drivers
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
` (21 preceding siblings ...)
2009-07-27 13:46 ` [PATCH 22/22] [WATCHDOG] Add support for WM831x watchdog Mark Brown
@ 2009-08-04 11:35 ` Samuel Ortiz
2009-08-04 11:44 ` Liam Girdwood
22 siblings, 1 reply; 46+ messages in thread
From: Samuel Ortiz @ 2009-08-04 11:35 UTC (permalink / raw)
To: Mark Brown
Cc: Richard Purdie, David Brownell, Dmitry Torokhov, Dmitry Torokhov,
Jean Delvare, Anton Vorontsov, Liam Girdwood, Alessandro Zummo,
Wim Van Sebroeck, linux-kernel, lm-sensors, linux-input,
rtc-linux
Hi Mark,
On Mon, Jul 27, 2009 at 02:45:27PM +0100, Mark Brown wrote:
> The following patch series adds initial support for the WM813x series of
> PMICs.
>
> Since these devices have functionality that crosses many subsystems the
> patches cross many kernel trees. For clarity I'm presenting this
> initial submission as a single series but I have endeavoured to split
> things up so that the patches can be applied separately to the various
> subsystems. In order to avoid merge issues as patches are applied the
> platform data for the devices is included in the core patches.
>
> Due to Kconfig and Makefile collisons I've also included the patch adding
> hwmon support for the WM835x series of PMICs to the series. Other than
> the build system updates there is no interdependence between those two
> patches.
I applied patches [1-8], the gpio one, the 2 hwmon ones and the input one.
I'll now wait for some more feedback for the remaining patches.
Thanks for your work.
Cheers,
Samuel.
> Mark Brown (22):
> mfd: Allow multiple MFD cells with the same name
> mfd: Initial core support for WM831x series devices
> mfd: Add WM831x interrupt support
> mfd: Add WM831x AUXADC support
> mfd: Conditionally add WM831x backlight subdevice
> mfd: Add basic WM831x OTP support
> mfd: Export ISEL values from WM831x core
> mfd: Hook WM831x into build system
> backlight: Add WM831x backlight driver
> gpio: Add WM831X GPIO driver
> hwmon: Add WM835x PMIC hardware monitoring driver
> hwmon: WM831x PMIC hardware monitoring driver
> Input: Add support for the WM831x ON pin
> leds: Add WM831x status LED driver
> power_supply: Add driver for the PMU on WM831x PMICs
> regulator: Add WM831x DC-DC buck convertor support
> regulator: Add WM831x LDO support
> regulator: Add WM831x EPE support
> regulator: Add WM831x DC-DC boost convertor support
> regulator: Add WM831x ISINK support
> RTC: Add support for RTCs on Wolfson WM831x devices
> [WATCHDOG] Add support for WM831x watchdog
>
> Documentation/hwmon/wm831x | 37 +
> Documentation/hwmon/wm8350 | 26 +
> drivers/gpio/Kconfig | 7 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/wm831x-gpio.c | 252 ++++++
> drivers/hwmon/Kconfig | 21 +
> drivers/hwmon/Makefile | 2 +
> drivers/hwmon/wm831x-hwmon.c | 236 ++++++
> drivers/hwmon/wm8350-hwmon.c | 151 ++++
> drivers/input/misc/Kconfig | 10 +
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/wm831x-on.c | 163 ++++
> drivers/leds/Kconfig | 7 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-wm831x-status.c | 341 ++++++++
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/mfd-core.c | 2 +-
> drivers/mfd/wm831x-core.c | 1549 ++++++++++++++++++++++++++++++++++
> drivers/mfd/wm831x-irq.c | 559 ++++++++++++
> drivers/mfd/wm831x-otp.c | 83 ++
> drivers/mfd/wm8350-core.c | 3 +
> drivers/power/Kconfig | 7 +
> drivers/power/Makefile | 1 +
> drivers/power/wm831x_power.c | 779 +++++++++++++++++
> drivers/regulator/Kconfig | 7 +
> drivers/regulator/Makefile | 3 +
> drivers/regulator/wm831x-dcdc.c | 862 +++++++++++++++++++
> drivers/regulator/wm831x-isink.c | 260 ++++++
> drivers/regulator/wm831x-ldo.c | 852 +++++++++++++++++++
> drivers/rtc/Kconfig | 10 +
> drivers/rtc/Makefile | 1 +
> drivers/rtc/rtc-wm831x.c | 538 ++++++++++++
> drivers/video/backlight/Kconfig | 7 +
> drivers/video/backlight/Makefile | 1 +
> drivers/video/backlight/wm831x_bl.c | 250 ++++++
> drivers/watchdog/Kconfig | 7 +
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/wm831x_wdt.c | 441 ++++++++++
> include/linux/mfd/core.h | 1 +
> include/linux/mfd/wm831x/auxadc.h | 216 +++++
> include/linux/mfd/wm831x/core.h | 289 +++++++
> include/linux/mfd/wm831x/gpio.h | 55 ++
> include/linux/mfd/wm831x/irq.h | 764 +++++++++++++++++
> include/linux/mfd/wm831x/otp.h | 162 ++++
> include/linux/mfd/wm831x/pdata.h | 113 +++
> include/linux/mfd/wm831x/pmu.h | 189 +++++
> include/linux/mfd/wm831x/regulator.h | 1218 ++++++++++++++++++++++++++
> include/linux/mfd/wm831x/status.h | 34 +
> include/linux/mfd/wm831x/watchdog.h | 52 ++
> include/linux/mfd/wm8350/core.h | 6 +
> 51 files changed, 10589 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/hwmon/wm831x
> create mode 100644 Documentation/hwmon/wm8350
> create mode 100644 drivers/gpio/wm831x-gpio.c
> create mode 100644 drivers/hwmon/wm831x-hwmon.c
> create mode 100644 drivers/hwmon/wm8350-hwmon.c
> create mode 100644 drivers/input/misc/wm831x-on.c
> create mode 100644 drivers/leds/leds-wm831x-status.c
> create mode 100644 drivers/mfd/wm831x-core.c
> create mode 100644 drivers/mfd/wm831x-irq.c
> create mode 100644 drivers/mfd/wm831x-otp.c
> create mode 100644 drivers/power/wm831x_power.c
> create mode 100644 drivers/regulator/wm831x-dcdc.c
> create mode 100644 drivers/regulator/wm831x-isink.c
> create mode 100644 drivers/regulator/wm831x-ldo.c
> create mode 100644 drivers/rtc/rtc-wm831x.c
> create mode 100644 drivers/video/backlight/wm831x_bl.c
> create mode 100644 drivers/watchdog/wm831x_wdt.c
> create mode 100644 include/linux/mfd/wm831x/auxadc.h
> create mode 100644 include/linux/mfd/wm831x/core.h
> create mode 100644 include/linux/mfd/wm831x/gpio.h
> create mode 100644 include/linux/mfd/wm831x/irq.h
> create mode 100644 include/linux/mfd/wm831x/otp.h
> create mode 100644 include/linux/mfd/wm831x/pdata.h
> create mode 100644 include/linux/mfd/wm831x/pmu.h
> create mode 100644 include/linux/mfd/wm831x/regulator.h
> create mode 100644 include/linux/mfd/wm831x/status.h
> create mode 100644 include/linux/mfd/wm831x/watchdog.h
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH 0/22] WM831x drivers
2009-08-04 11:35 ` [PATCH 0/22] WM831x drivers Samuel Ortiz
@ 2009-08-04 11:44 ` Liam Girdwood
2009-08-04 14:07 ` Samuel Ortiz
0 siblings, 1 reply; 46+ messages in thread
From: Liam Girdwood @ 2009-08-04 11:44 UTC (permalink / raw)
To: Samuel Ortiz
Cc: Mark Brown, Richard Purdie, David Brownell, Dmitry Torokhov,
Dmitry Torokhov, Jean Delvare, Anton Vorontsov, Alessandro Zummo,
Wim Van Sebroeck, linux-kernel, lm-sensors, linux-input,
rtc-linux
On Tue, 2009-08-04 at 13:35 +0200, Samuel Ortiz wrote:
> Hi Mark,
>
> On Mon, Jul 27, 2009 at 02:45:27PM +0100, Mark Brown wrote:
> > The following patch series adds initial support for the WM813x series of
> > PMICs.
> >
> > Since these devices have functionality that crosses many subsystems the
> > patches cross many kernel trees. For clarity I'm presenting this
> > initial submission as a single series but I have endeavoured to split
> > things up so that the patches can be applied separately to the various
> > subsystems. In order to avoid merge issues as patches are applied the
> > platform data for the devices is included in the core patches.
> >
> > Due to Kconfig and Makefile collisons I've also included the patch adding
> > hwmon support for the WM835x series of PMICs to the series. Other than
> > the build system updates there is no interdependence between those two
> > patches.
> I applied patches [1-8], the gpio one, the 2 hwmon ones and the input one.
> I'll now wait for some more feedback for the remaining patches.
>
Regulator patches :-
Acked-by Liam Girdwood <lrg@slimlogic.co.uk>
Thanks
Liam
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH] hwmon: WM831x PMIC hardware monitoring driver
2009-08-04 11:33 ` Samuel Ortiz
@ 2009-08-04 11:53 ` Jean Delvare
0 siblings, 0 replies; 46+ messages in thread
From: Jean Delvare @ 2009-08-04 11:53 UTC (permalink / raw)
To: Samuel Ortiz; +Cc: Mark Brown, linux-kernel, lm-sensors
Hi Samuel,
On Tue, 4 Aug 2009 13:33:15 +0200, Samuel Ortiz wrote:
> Hi Jean, Mark,
>
> On Tue, Jul 28, 2009 at 03:50:49PM +0100, Mark Brown wrote:
> > On Tue, Jul 28, 2009 at 04:26:58PM +0200, Jean Delvare wrote:
> > > Acked-by: Jean Delvare <khali@linux-fr.org>
> > >
> > > And as I said before for the wm8350-hwmon driver: I can pick this patch
> > > and push it to Linux in 2.6.32 if you want, but if you want it to take
> > > a different route this is equally fine with me. Just tell me if you
> > > want me to pick it.
> >
> > I'm more than happy for you to take both - the only reason that I asked
> > you to hold off on the wm8350 patch originally was that I knew I was
> > going to be releasing this driver and there would be collisions with the
> > Kconfig stuff which was due to be released very soon.
>
> I applied both patches to my for-next branch. Jean, if you prefer them to go
> through your tree, please go ahead and I'll remove them from mine.
This is totally fine with me, thanks for picking them. I've just moved
to a new place and my backlog is big, so I am grateful for any work
others may offload from me :)
--
Jean Delvare
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH 0/22] WM831x drivers
2009-08-04 11:44 ` Liam Girdwood
@ 2009-08-04 14:07 ` Samuel Ortiz
0 siblings, 0 replies; 46+ messages in thread
From: Samuel Ortiz @ 2009-08-04 14:07 UTC (permalink / raw)
To: Liam Girdwood
Cc: Mark Brown, Richard Purdie, David Brownell, Dmitry Torokhov,
Dmitry Torokhov, Jean Delvare, Anton Vorontsov, Alessandro Zummo,
Wim Van Sebroeck, linux-kernel, lm-sensors, linux-input,
rtc-linux
Hi Liam
On Tue, Aug 04, 2009 at 12:44:09PM +0100, Liam Girdwood wrote:
> On Tue, 2009-08-04 at 13:35 +0200, Samuel Ortiz wrote:
> > Hi Mark,
> >
> > On Mon, Jul 27, 2009 at 02:45:27PM +0100, Mark Brown wrote:
> > > The following patch series adds initial support for the WM813x series of
> > > PMICs.
> > >
> > > Since these devices have functionality that crosses many subsystems the
> > > patches cross many kernel trees. For clarity I'm presenting this
> > > initial submission as a single series but I have endeavoured to split
> > > things up so that the patches can be applied separately to the various
> > > subsystems. In order to avoid merge issues as patches are applied the
> > > platform data for the devices is included in the core patches.
> > >
> > > Due to Kconfig and Makefile collisons I've also included the patch adding
> > > hwmon support for the WM835x series of PMICs to the series. Other than
> > > the build system updates there is no interdependence between those two
> > > patches.
> > I applied patches [1-8], the gpio one, the 2 hwmon ones and the input one.
> > I'll now wait for some more feedback for the remaining patches.
> >
>
> Regulator patches :-
>
> Acked-by Liam Girdwood <lrg@slimlogic.co.uk>
Thanks Liam, I applied all 5 of them to my for-next branch
Cheers,
Samuel.
> Thanks
>
> Liam
>
>
--
Intel Open Source Technology Centre
http://oss.intel.com/
^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2009-08-04 14:05 UTC | newest]
Thread overview: 46+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-07-27 13:45 [PATCH 0/22] WM831x drivers Mark Brown
2009-07-27 13:45 ` [PATCH 01/22] mfd: Allow multiple MFD cells with the same name Mark Brown
2009-07-27 13:45 ` [PATCH 02/22] mfd: Initial core support for WM831x series devices Mark Brown
2009-07-27 15:00 ` [PATCH] mfd: Fix comment cut'n'paste in register lock code Mark Brown
2009-07-27 13:45 ` [PATCH 03/22] mfd: Add WM831x interrupt support Mark Brown
2009-07-27 13:45 ` [PATCH 04/22] mfd: Add WM831x AUXADC support Mark Brown
2009-07-27 13:45 ` [PATCH 05/22] mfd: Conditionally add WM831x backlight subdevice Mark Brown
2009-07-27 13:45 ` [PATCH 06/22] mfd: Add basic WM831x OTP support Mark Brown
2009-07-27 13:45 ` [PATCH 07/22] mfd: Export ISEL values from WM831x core Mark Brown
2009-07-27 13:45 ` [PATCH 08/22] mfd: Hook WM831x into build system Mark Brown
2009-07-27 13:45 ` [PATCH 09/22] backlight: Add WM831x backlight driver Mark Brown
2009-07-27 13:46 ` [PATCH 10/22] gpio: Add WM831X GPIO driver Mark Brown
2009-07-27 20:27 ` David Brownell
2009-07-27 13:46 ` [PATCH 11/22] hwmon: Add WM835x PMIC hardware monitoring driver Mark Brown
2009-07-27 13:46 ` [PATCH 12/22] hwmon: WM831x " Mark Brown
2009-07-27 19:44 ` [lm-sensors] " Jean Delvare
2009-07-27 20:46 ` Mark Brown
2009-07-28 7:26 ` Jean Delvare
2009-07-28 14:11 ` [PATCH] " Mark Brown
2009-07-28 14:26 ` Jean Delvare
2009-07-28 14:50 ` Mark Brown
2009-07-28 14:52 ` Mark Brown
2009-08-04 11:33 ` Samuel Ortiz
2009-08-04 11:53 ` Jean Delvare
2009-07-27 13:46 ` [PATCH 13/22] Input: Add support for the WM831x ON pin Mark Brown
2009-07-27 15:38 ` Dmitry Torokhov
2009-07-27 15:41 ` Mark Brown
2009-07-28 14:13 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 14/22] leds: Add WM831x status LED driver Mark Brown
2009-07-27 13:46 ` [PATCH 15/22] power_supply: Add driver for the PMU on WM831x PMICs Mark Brown
2009-07-27 13:46 ` [PATCH 16/22] regulator: Add WM831x DC-DC buck convertor support Mark Brown
2009-07-28 14:21 ` [PATCH 17/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 17/22] regulator: Add WM831x LDO support Mark Brown
2009-07-28 14:22 ` [PATCH 18/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 18/22] regulator: Add WM831x EPE support Mark Brown
2009-07-28 14:22 ` [PATCH 19/23] " Mark Brown
2009-07-27 13:46 ` [PATCH 19/22] regulator: Add WM831x DC-DC boost convertor support Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 20/22] regulator: Add WM831x ISINK support Mark Brown
2009-07-28 14:23 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 21/22] RTC: Add support for RTCs on Wolfson WM831x devices Mark Brown
2009-07-28 14:18 ` [PATCH] " Mark Brown
2009-07-27 13:46 ` [PATCH 22/22] [WATCHDOG] Add support for WM831x watchdog Mark Brown
2009-08-04 11:35 ` [PATCH 0/22] WM831x drivers Samuel Ortiz
2009-08-04 11:44 ` Liam Girdwood
2009-08-04 14:07 ` Samuel Ortiz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox