Re: [PATCH v3] x86: clear incorrectly forced X86_FEATURE_LAHF_LM flag

[Borislav Petkov <borislav.petkov@amd.com>]

On Tue, Aug 11, 2009 at 12:55:03PM -0300, Kevin Winchester wrote:
> 2009/8/11 Borislav Petkov <borislav.petkov@amd.com>:
> > On Tue, Aug 11, 2009 at 04:37:56PM +0200, Mikael Pettersson wrote:
> >> Since the BIOS apparently wrote some MSR to get LAHF_LM incorrectly
> >> reported by CPUID, would it be possible to also correct that MSR so
> >> that applications that execute CPUID get the correct feature flags?
> >
> > That's a good catch, actually. We have to turn off that bit in the cpuid
> > leaf too if the CPU doesn't support the instructions so that cpuid info
> > is consistent. LAHF/SAHF support in 64bit mode has to be cpuid-checked
> > prior to using them so that info has to be correct.
> >
> > @Kevin: willing to try a patch or two?
> >
> 
> Sure, I'll give it a try this evening.  I assume that since Erratum 110 says:
> 
> --------------------------
> Suggested Workaround
> For processors which support the feature (as determined by the
> processor revision ID), BIOS should
> write a one to:
> • MSR C001_100Dh, bit 32 for revision D silicon.
> • MSR C001_1005h, bit 32 for revision E and later silicon.
> This will cause the extended feature flag in ECX[0] to be set.
> --------------------------
> 
> That writing a zero to those same MSRs would clear the feature flag?

Yep :). Patch coming up...

-- 
Regards/Gruss,
Boris.

Operating | Advanced Micro Devices GmbH
  System  | Karl-Hammerschmidt-Str. 34, 85609 Dornach b. München, Germany
 Research | Geschäftsführer: Thomas M. McCoy, Giuliano Meroni
  Center  | Sitz: Dornach, Gemeinde Aschheim, Landkreis München
  (OSRC)  | Registergericht München, HRB Nr. 43632