From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755618AbZHUORF (ORCPT ); Fri, 21 Aug 2009 10:17:05 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754692AbZHUORE (ORCPT ); Fri, 21 Aug 2009 10:17:04 -0400 Received: from cpsmtpm-eml102.kpnxchange.com ([195.121.3.6]:56827 "EHLO CPSMTPM-EML102.kpnxchange.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754644AbZHUORE (ORCPT ); Fri, 21 Aug 2009 10:17:04 -0400 From: Frans Pop To: linux-acpi@vger.kernel.org Subject: [PATCH] acpi: thermal: display forced passive trip points in proc Date: Fri, 21 Aug 2009 16:17:02 +0200 User-Agent: KMail/1.9.9 Cc: Zhang Rui , linux-kernel@vger.kernel.org MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200908211617.03574.elendil@planet.nl> X-OriginalArrivalTime: 21 Aug 2009 14:17:04.0209 (UTC) FILETIME=[0EB4D410:01CA226A] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Users can force a passive trip point for a thermal zone that does not have _PSV defined in ACPI by setting the passive attribute in sysfs. It's useful to display such trip points in /proc/acpi/thermal_zone. .../TZ1/cooling_mode: .../TZ1/polling_frequency:polling frequency: 10 seconds .../TZ1/state:state: ok .../TZ1/temperature:temperature: 56 C .../TZ1/trip_points:critical (S5): 110 C .../TZ1/trip_points:passive: 95 C: forced Signed-off-by: Frans Pop Cc: Zhang Rui --- Now that I've got this set on my notebook, I also want to see that it's set :-) Cheers, FJP diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 564ea14..c64cfa9 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -1050,6 +1050,10 @@ static int acpi_thermal_trip_seq_show(struct seq_file *seq, void *offset) acpi_device_bid(device)); } seq_puts(seq, "\n"); + } else if (tz->thermal_zone->forced_passive) { + seq_printf(seq, + "passive: %i C: forced", + tz->thermal_zone->forced_passive / 1000); } for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {