From: Ingo Molnar <mingo@elte.hu>
To: Jason Wessel <jason.wessel@windriver.com>, Len Brown <lenb@kernel.org>
Cc: Greg KH <gregkh@suse.de>,
Linus Torvalds <torvalds@linux-foundation.org>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: Re: [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan one early console"
Date: Wed, 23 Sep 2009 21:02:39 +0200 [thread overview]
Message-ID: <20090923190239.GC24251@elte.hu> (raw)
In-Reply-To: <4ABA6182.1000106@windriver.com>
* Jason Wessel <jason.wessel@windriver.com> wrote:
> Ingo Molnar wrote:
> >> early_printk: Allow more than one early console
> >>
> >
> > this patch broke things pretty badly on x86, with pretty much any
> > config, as long as the early console is used - which most of my
> > test-systems do :-(
> >
>
> Ingo,
>
> Can you send me the boot args and kernel config you are using? I'd
> like to figure out which part was at fault and fix it up.
will do. Will take some time though - trying to track down a new boot
crash as well:
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
initcall acpiphp_init+0x0/0x83 returned -19 after 16410 usecs
calling ibm_acpiphp_init+0x0/0x190 @ 1
BUG: unable to handle kernel NULL pointer dereference at 0000000000000003
IP: [<ffffffff82b07130>] ibm_find_acpi_device+0x5c/0xf5
PGD 0
Oops: 0002 [#1] SMP DEBUG_PAGEALLOC
last sysfs file:
CPU 0
Pid: 1, comm: swapper Not tainted 2.6.31-tip #16786 System Product Name
RIP: 0010:[<ffffffff82b07130>] [<ffffffff82b07130>] ibm_find_acpi_device+0x5c/0xf5
RSP: 0018:ffff88003f2d1d60 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88003f2d1d68 RSI: 00000000000001e4 RDI: 0000000000000000
RBP: ffff88003f2d1d90 R08: 0000000000000001 R09: ffffffff824b645b
R10: 000000002d0ef63b R11: ffff88003f2d1a80 R12: ffff88003fa780d0
R13: ffffffff83940dc8 R14: 0000000000000001 R15: ffffffff83942e10
FS: 0000000000000000(0000) GS:ffff880005800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000003 CR3: 0000000001001000 CR4: 00000000000006b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88003f2d0000, task ffff88003f2c8000)
Stack:
ffff88003f2c8000 ffff88003cfbb690 000000002d0ef63b 0000000000000000
<0> 0000000000000000 ffff88003fa780d0 ffff88003f2d1e10 ffffffff8156b6b6
<0> 0000000000000001 0000000100000000 0000000000000000 ffffffff83940dc8
Call Trace:
[<ffffffff8156b6b6>] acpi_ns_walk_namespace+0x11d/0x234
[<ffffffff82b070d4>] ? ibm_find_acpi_device+0x0/0xf5
[<ffffffff8157b159>] ? acpi_ut_acquire_mutex+0xd9/0x12e
[<ffffffff82b070d4>] ? ibm_find_acpi_device+0x0/0xf5
[<ffffffff81566dfa>] acpi_walk_namespace+0x105/0x162
[<ffffffff81d067bf>] ? acpi_pm_read+0xd/0x3e
[<ffffffff82b06f44>] ? ibm_acpiphp_init+0x0/0x190
[<ffffffff82b06fa8>] ibm_acpiphp_init+0x64/0x190
[<ffffffff810090b4>] do_one_initcall+0x82/0x1a6
[<ffffffff810edecc>] ? init_irq_proc+0x77/0x9a
[<ffffffff82ad8975>] do_basic_setup+0x5e/0x87
[<ffffffff82ad8a26>] kernel_init+0x88/0xe2
[<ffffffff8103ddfa>] child_rip+0xa/0x20
[<ffffffff8103d7bc>] ? restore_args+0x0/0x30
[<ffffffff82ad899e>] ? kernel_init+0x0/0xe2
[<ffffffff8103ddf0>] ? child_rip+0x0/0x20
Code: 48 c7 c2 c0 7b 0b 82 48 c7 c6 95 39 4a 82 48 c7 c7 1a 3c 4a 82 31 c0 e8 02 84 4b ff 31 c0 e9 82 00 00 00 48 8b 45 d8 48 8b 40 30 <c6> 40 03 00 48 8b 45 d8 83 78 18 00 74 5f f6 40 0d 04 74 59 48
RIP [<ffffffff82b07130>] ibm_find_acpi_device+0x5c/0xf5
RSP <ffff88003f2d1d60>
CR2: 0000000000000003
---[ end trace 5a5d197966b56a2e ]---
Kernel panic - not syncing: Fatal exception
Pid: 1, comm: swapper Tainted: G D 2.6.31-tip #16786
/me looks in the general direction of Len ;-)
Ingo
next prev parent reply other threads:[~2009-09-23 19:02 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-23 13:55 [GIT PATCH] USB patches for 2.6.31-git Greg KH
2009-09-23 17:24 ` [origin tree build failure] [PATCH] USB sierra: Fix build if !CONFIG_PM Ingo Molnar
2009-09-23 17:32 ` Randy Dunlap
2009-09-23 17:39 ` Ingo Molnar
2009-09-23 17:34 ` Greg KH
2009-09-23 17:37 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow more than one early console" Ingo Molnar
2009-09-23 17:57 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allow morethan " Jason Wessel
2009-09-23 19:02 ` Ingo Molnar [this message]
2009-09-23 19:17 ` Ingo Molnar
2009-09-23 21:05 ` Ingo Molnar
2009-09-23 21:19 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan " Jason Wessel
2009-09-23 21:39 ` Ingo Molnar
2009-09-23 22:39 ` [origin tree boot hang] [PATCH] Revert "early_printk:Allowmorethan " Jason Wessel
2009-09-23 22:56 ` Linus Torvalds
2009-09-23 23:13 ` Jason Wessel
2009-09-24 11:48 ` [tip:x86/urgent] x86: early_printk: Protect against using the same device twice tip-bot for Jason Wessel
2009-09-24 12:22 ` [origin tree boot hang] [PATCH] Revert "early_printk: Allowmorethan one early console" Johannes Weiner
2009-09-24 14:08 ` Jason Wessel
2009-10-01 8:34 ` Ingo Molnar
2009-10-01 9:58 ` [tip:x86/urgent] x86: earlyprintk: Fix regression to handle serial,ttySn as 1 arg tip-bot for Jason Wessel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090923190239.GC24251@elte.hu \
--to=mingo@elte.hu \
--cc=akpm@linux-foundation.org \
--cc=gregkh@suse.de \
--cc=jason.wessel@windriver.com \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox