From: Greg KH <gregkh@suse.de>
To: linux-kernel@vger.kernel.org, stable@kernel.org
Cc: stable-review@kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Hugh Dickins <hugh.dickins@tiscali.co.uk>,
Rik van Riel <riel@redhat.com>,
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>,
Nick Piggin <npiggin@suse.de>, Mel Gorman <mel@csn.ul.ie>
Subject: [120/136] mm: munlock use follow_page
Date: Thu, 01 Oct 2009 18:17:48 -0700 [thread overview]
Message-ID: <20091002012426.002095979@mini.kroah.org> (raw)
In-Reply-To: <20091002012911.GA18542@kroah.com>
[-- Attachment #1: mm-munlock-use-follow_page.patch --]
[-- Type: text/plain, Size: 7296 bytes --]
2.6.31-stable review patch. If anyone has any objections, please let us know.
------------------
From: Hugh Dickins <hugh.dickins@tiscali.co.uk>
commit 408e82b78bcc9f1b47c76e833c3df97f675947de upstream.
Hiroaki Wakabayashi points out that when mlock() has been interrupted
by SIGKILL, the subsequent munlock() takes unnecessarily long because
its use of __get_user_pages() insists on faulting in all the pages
which mlock() never reached.
It's worse than slowness if mlock() is terminated by Out Of Memory kill:
the munlock_vma_pages_all() in exit_mmap() insists on faulting in all the
pages which mlock() could not find memory for; so innocent bystanders are
killed too, and perhaps the system hangs.
__get_user_pages() does a lot that's silly for munlock(): so remove the
munlock option from __mlock_vma_pages_range(), and use a simple loop of
follow_page()s in munlock_vma_pages_range() instead; ignoring absent
pages, and not marking present pages as accessed or dirty.
(Change munlock() to only go so far as mlock() reached? That does not
work out, given the convention that mlock() claims complete success even
when it has to give up early - in part so that an underlying file can be
extended later, and those pages locked which earlier would give SIGBUS.)
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Acked-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Hiroaki Wakabayashi <primulaelatior@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
mm/mlock.c | 99 ++++++++++++++++++++++++-------------------------------------
1 file changed, 40 insertions(+), 59 deletions(-)
--- a/mm/mlock.c
+++ b/mm/mlock.c
@@ -139,49 +139,36 @@ static void munlock_vma_page(struct page
}
/**
- * __mlock_vma_pages_range() - mlock/munlock a range of pages in the vma.
+ * __mlock_vma_pages_range() - mlock a range of pages in the vma.
* @vma: target vma
* @start: start address
* @end: end address
- * @mlock: 0 indicate munlock, otherwise mlock.
*
- * If @mlock == 0, unlock an mlocked range;
- * else mlock the range of pages. This takes care of making the pages present ,
- * too.
+ * This takes care of making the pages present too.
*
* return 0 on success, negative error code on error.
*
* vma->vm_mm->mmap_sem must be held for at least read.
*/
static long __mlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end,
- int mlock)
+ unsigned long start, unsigned long end)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long addr = start;
struct page *pages[16]; /* 16 gives a reasonable batch */
int nr_pages = (end - start) / PAGE_SIZE;
int ret = 0;
- int gup_flags = 0;
+ int gup_flags;
VM_BUG_ON(start & ~PAGE_MASK);
VM_BUG_ON(end & ~PAGE_MASK);
VM_BUG_ON(start < vma->vm_start);
VM_BUG_ON(end > vma->vm_end);
- VM_BUG_ON((!rwsem_is_locked(&mm->mmap_sem)) &&
- (atomic_read(&mm->mm_users) != 0));
-
- /*
- * mlock: don't page populate if vma has PROT_NONE permission.
- * munlock: always do munlock although the vma has PROT_NONE
- * permission, or SIGKILL is pending.
- */
- if (!mlock)
- gup_flags |= GUP_FLAGS_IGNORE_VMA_PERMISSIONS |
- GUP_FLAGS_IGNORE_SIGKILL;
+ VM_BUG_ON(!rwsem_is_locked(&mm->mmap_sem));
+ gup_flags = 0;
if (vma->vm_flags & VM_WRITE)
- gup_flags |= GUP_FLAGS_WRITE;
+ gup_flags = GUP_FLAGS_WRITE;
while (nr_pages > 0) {
int i;
@@ -201,19 +188,10 @@ static long __mlock_vma_pages_range(stru
* This can happen for, e.g., VM_NONLINEAR regions before
* a page has been allocated and mapped at a given offset,
* or for addresses that map beyond end of a file.
- * We'll mlock the the pages if/when they get faulted in.
+ * We'll mlock the pages if/when they get faulted in.
*/
if (ret < 0)
break;
- if (ret == 0) {
- /*
- * We know the vma is there, so the only time
- * we cannot get a single page should be an
- * error (ret < 0) case.
- */
- WARN_ON(1);
- break;
- }
lru_add_drain(); /* push cached pages to LRU */
@@ -224,28 +202,22 @@ static long __mlock_vma_pages_range(stru
/*
* Because we lock page here and migration is blocked
* by the elevated reference, we need only check for
- * page truncation (file-cache only).
+ * file-cache page truncation. This page->mapping
+ * check also neatly skips over the ZERO_PAGE(),
+ * though if that's common we'd prefer not to lock it.
*/
- if (page->mapping) {
- if (mlock)
- mlock_vma_page(page);
- else
- munlock_vma_page(page);
- }
+ if (page->mapping)
+ mlock_vma_page(page);
unlock_page(page);
- put_page(page); /* ref from get_user_pages() */
-
- /*
- * here we assume that get_user_pages() has given us
- * a list of virtually contiguous pages.
- */
- addr += PAGE_SIZE; /* for next get_user_pages() */
- nr_pages--;
+ put_page(page); /* ref from get_user_pages() */
}
+
+ addr += ret * PAGE_SIZE;
+ nr_pages -= ret;
ret = 0;
}
- return ret; /* count entire vma as locked_vm */
+ return ret; /* 0 or negative error code */
}
/*
@@ -289,7 +261,7 @@ long mlock_vma_pages_range(struct vm_are
is_vm_hugetlb_page(vma) ||
vma == get_gate_vma(current))) {
- __mlock_vma_pages_range(vma, start, end, 1);
+ __mlock_vma_pages_range(vma, start, end);
/* Hide errors from mmap() and other callers */
return 0;
@@ -310,7 +282,6 @@ no_mlock:
return nr_pages; /* error or pages NOT mlocked */
}
-
/*
* munlock_vma_pages_range() - munlock all pages in the vma range.'
* @vma - vma containing range to be munlock()ed.
@@ -330,10 +301,24 @@ no_mlock:
* free them. This will result in freeing mlocked pages.
*/
void munlock_vma_pages_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
+ unsigned long start, unsigned long end)
{
+ unsigned long addr;
+
+ lru_add_drain();
vma->vm_flags &= ~VM_LOCKED;
- __mlock_vma_pages_range(vma, start, end, 0);
+
+ for (addr = start; addr < end; addr += PAGE_SIZE) {
+ struct page *page = follow_page(vma, addr, FOLL_GET);
+ if (page) {
+ lock_page(page);
+ if (page->mapping)
+ munlock_vma_page(page);
+ unlock_page(page);
+ put_page(page);
+ }
+ cond_resched();
+ }
}
/*
@@ -400,18 +385,14 @@ success:
* It's okay if try_to_unmap_one unmaps a page just after we
* set VM_LOCKED, __mlock_vma_pages_range will bring it back.
*/
- vma->vm_flags = newflags;
if (lock) {
- ret = __mlock_vma_pages_range(vma, start, end, 1);
-
- if (ret > 0) {
- mm->locked_vm -= ret;
- ret = 0;
- } else
- ret = __mlock_posix_error_return(ret); /* translate if needed */
+ vma->vm_flags = newflags;
+ ret = __mlock_vma_pages_range(vma, start, end);
+ if (ret < 0)
+ ret = __mlock_posix_error_return(ret);
} else {
- __mlock_vma_pages_range(vma, start, end, 0);
+ munlock_vma_pages_range(vma, start, end);
}
out:
next prev parent reply other threads:[~2009-10-02 1:34 UTC|newest]
Thread overview: 155+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20091002011548.335611824@mini.kroah.org>
2009-10-02 1:29 ` [000/136] 2.6.31.2-stable review Greg KH
2009-10-02 1:15 ` [001/136] KVM: VMX: Fix EPT with WP bit change during paging Greg KH
2009-10-02 1:15 ` [002/136] pata_amd: do not filter out valid modes in nv_mode_filter Greg KH
2009-10-02 1:15 ` [003/136] p54usb: add Zcomax XG-705A usbid Greg KH
2009-10-02 1:15 ` [004/136] x86: Increase MIN_GAP to include randomized stack Greg KH
2009-10-02 1:15 ` [005/136] serial: bfin_5xx: fix building as module when early printk is enabled Greg KH
2009-10-02 1:15 ` [006/136] USB: option.c Add support for ZTE AC2726 EVDO modem Greg KH
2009-10-02 1:15 ` [007/136] USB: option: TELIT UC864G support Greg KH
2009-10-02 1:15 ` [008/136] video: s3c_fb.c: fix build with CONFIG_HOTPLUG=n Greg KH
2009-10-02 1:15 ` [009/136] kbuild: fix cc1 options check to ensure we do not use -fPIC when compiling Greg KH
2009-10-02 1:15 ` [010/136] drivers/mfd/ab3100-core.c: fix powerpc build error Greg KH
2009-10-02 1:15 ` [011/136] thinkpad-acpi: dont ask about brightness_mode for fw. 1V and 1R Greg KH
2009-10-02 1:16 ` [012/136] ACPI: pci_slot.ko wants a 64-bit _SUN Greg KH
2009-10-02 1:16 ` [013/136] fbcon: only unbind from console if successfully registered Greg KH
2009-10-02 1:16 ` [014/136] kallsyms: fix segfault in prefix_underscores_count() Greg KH
2009-10-02 1:16 ` [015/136] sisfb: change SiS_DDC_Port type to SISIOADDRESS Greg KH
2009-10-02 1:16 ` [016/136] mmc_spi: fail gracefully if host or card do not support the switch command Greg KH
2009-10-02 1:16 ` [017/136] alpha: AGP update (fixes compile failure) Greg KH
2009-10-02 1:16 ` [018/136] fs: make sure data stored into inode is properly seen before unlocking new inode Greg KH
2009-10-02 1:16 ` [019/136] eCryptfs: Handle unrecognized tag 3 cipher codes Greg KH
2009-10-02 1:16 ` [020/136] eCryptfs: Check for O_RDONLY lower inodes when opening lower files Greg KH
2009-10-02 1:16 ` [021/136] eCryptfs: Filename encryption only supports password auth tokens Greg KH
2009-10-02 1:16 ` [022/136] eCryptfs: Validate global auth tok keys Greg KH
2009-10-02 1:16 ` [023/136] eCryptfs: Prevent lower dentry from going negative during unlink Greg KH
2009-10-02 1:16 ` [024/136] [CIFS] Re-enable Lanman security Greg KH
2009-10-02 1:16 ` [025/136] xen: make -fstack-protector work under Xen Greg KH
2009-10-02 1:16 ` [026/136] xen: only enable interrupts while actually blocking for spinlock Greg KH
2009-10-02 1:16 ` [027/136] xen: use stronger barrier after unlocking lock Greg KH
2009-10-02 1:16 ` [028/136] xen: check EFER for NX before setting up GDT mapping Greg KH
2009-10-02 1:16 ` [029/136] perf_counter: Fix perf_copy_attr() pointer arithmetic Greg KH
2009-10-02 1:16 ` [030/136] perf tools: Fix buffer allocation Greg KH
2009-10-02 1:16 ` [031/136] tty: serial/pcmcia: add ID for Advantech card Greg KH
2009-10-02 1:16 ` [032/136] PM / PCMCIA: Drop second argument of pcmcia_socket_dev_suspend() Greg KH
2009-10-02 1:16 ` [033/136] PM / yenta: Fix cardbus suspend/resume regression Greg KH
2009-10-02 1:16 ` [034/136] sony-laptop: check for rfkill hard block at load time Greg KH
2009-10-02 1:16 ` [035/136] nilfs2: fix missing zero-fill initialization of btree node cache Greg KH
2009-10-02 1:16 ` [036/136] ar9170usb: add usbid for TP-Link TL-WN821N v2 Greg KH
2009-10-02 1:16 ` [037/136] mtd: nand: fix ECC Correction bug for SMC ordering for NDFC driver Greg KH
2009-10-02 1:16 ` [038/136] mtd: ofpart: Check availability of reg property instead of name property Greg KH
2009-10-02 1:16 ` [039/136] mtd: cfi_cmdset_0002: add 0xFF intolerance for M29W128G Greg KH
2009-10-02 1:16 ` [040/136] USB: serial: ftdi_sio: new hardware support - hameg power supply Greg KH
2009-10-02 1:16 ` [041/136] USB: add PIDs for FTDI based OpenDCC hardware Greg KH
2009-10-02 1:16 ` [042/136] USB: serial: ftdi: handle gnICE+ JTAG adaptors Greg KH
2009-10-02 1:16 ` [043/136] USB: CDC WDM driver doesnt support non-blocking reads Greg KH
2009-10-02 1:16 ` [044/136] USB: fix cdc-acm regression in open Greg KH
2009-10-02 1:16 ` [045/136] cdc_acm: Fix to use modern speed interfaces Greg KH
2009-10-02 1:16 ` [046/136] tty: remove dtr/rts use from the driver open methods Greg KH
2009-10-02 1:16 ` [047/136] tty: gigaset: really fix chars_in_buffer Greg KH
2009-10-02 1:16 ` [048/136] kaweth: Fix memory leak in kaweth_control() Greg KH
2009-10-02 1:16 ` [049/136] x86: SGI UV: Fix IPI macros Greg KH
2009-10-02 1:16 ` [050/136] USB: serial: pl2303: new hardware support - sanwa multimeter Greg KH
2009-10-02 1:16 ` [051/136] USB: storage: fix a resume path GFP_NOIO must be used Greg KH
2009-10-02 1:16 ` [052/136] USB: usb-storage fails to attach to Huawei Datacard cdrom device Greg KH
2009-10-02 1:16 ` [053/136] USB: usbtmc: sanity checks for DEV_DEP_MSG_IN urbs Greg KH
2009-10-02 1:16 ` [054/136] USB: sl811-hcd: Fix device disconnect: Greg KH
2009-10-02 1:16 ` [055/136] drm/i915: remove restore in resume Greg KH
2009-10-02 1:16 ` [056/136] drm/i915: Only destroy a constructed mmap offset Greg KH
2009-10-02 1:16 ` [057/136] drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks Greg KH
2009-10-02 1:16 ` [058/136] drm/i915: Add buffer to inactive list immediately during fault Greg KH
2009-10-02 1:16 ` [059/136] drm/i915: Check that the relocation points to within the target Greg KH
2009-10-02 1:16 ` [060/136] drm/i915: Fix typo for wrong LVDS clock setting on IGDNG Greg KH
2009-10-02 1:16 ` [061/136] drm/i915: Fix SSC frequence for IGDNG Greg KH
2009-10-02 1:16 ` [062/136] drm/i915: Remove DAC disable in CRT force detect on IGDNG Greg KH
2009-10-02 1:16 ` [063/136] drm/i915: Fix LVDS panel fitting on Arrandale Greg KH
2009-10-02 1:16 ` [064/136] drm/I915: Use the CRT DDC to get the EDID for DVI-connector on Mac Greg KH
2009-10-02 1:16 ` [065/136] drm/i915: fix tiling on IGDNG Greg KH
2009-10-02 1:16 ` [066/136] agp/intel: Fix the pre-9xx chipset flush Greg KH
2009-10-02 1:16 ` [067/136] nfsd4: fix null dereference creating nfsv4 callback client Greg KH
2009-10-02 1:16 ` [068/136] can: fix NOHZ local_softirq_pending 08 warning Greg KH
2009-10-02 1:16 ` [069/136] ahci: restore pci_intx() handling Greg KH
2009-10-02 1:16 ` [070/136] [ARM] pxa/sharpsl_pm: zaurus c3000 aka spitz: fix resume Greg KH
2009-10-02 1:16 ` [071/136] net ax25: Fix signed comparison in the sockopt handler Greg KH
2009-10-02 1:17 ` [072/136] net: Make the copy length in af_packet sockopt handler unsigned Greg KH
2009-10-02 1:17 ` [073/136] pty_write: dont do a tty_wakeup() when the buffers are full Greg KH
2009-10-02 1:17 ` [074/136] KVM: fix cpuid E2BIG handling for extended request types Greg KH
2009-10-02 1:17 ` [075/136] KVM: MMU: fix missing locking in alloc_mmu_pages Greg KH
2009-10-02 1:17 ` [076/136] KVM: MMU: fix bogus alloc_mmu_pages assignment Greg KH
2009-10-02 1:17 ` [077/136] KVM: Protect update_cr8_intercept() when running without an apic Greg KH
2009-10-02 1:17 ` [078/136] Revert "KVM: x86: check for cr3 validity in ioctl_set_sregs" Greg KH
2009-10-02 1:17 ` [079/136] [CPUFREQ] Fix NULL ptr regression in powernow-k8 Greg KH
2009-10-03 15:19 ` Herton Ronaldo Krzesinski
2009-10-05 16:08 ` [Stable-review] " Greg KH
2009-10-02 1:17 ` [080/136] perf tools: do not complain if root is owning perf.data Greg KH
2009-10-02 1:17 ` [081/136] netfilter: nf_nat: fix inverted logic for persistent NAT mappings Greg KH
2009-10-02 1:17 ` [082/136] netfilter: nf_conntrack: netns fix re reliable conntrack event delivery Greg KH
2009-10-02 1:17 ` [083/136] netfilter: bridge: refcount fix Greg KH
2009-10-02 1:17 ` [084/136] netfilter: ebt_ulog: fix checkentry return value Greg KH
2009-10-02 1:17 ` [085/136] ath5k: Wakeup fixes Greg KH
2009-10-02 1:17 ` [086/136] ath5k: do not release irq across suspend/resume Greg KH
2009-10-02 1:17 ` [087/136] Driver core: add new device to buss list before probing Greg KH
2009-10-02 1:17 ` [088/136] tty: Add a full port_close function Greg KH
2009-10-02 1:17 ` [089/136] tty: USB hangup is racy Greg KH
2009-10-02 1:17 ` [090/136] tty: USB can now use the shutdown method for kref based freeing of ports Greg KH
2009-10-02 1:17 ` [091/136] hwmon: (asus_atk0110) Add maintainer information Greg KH
2009-10-02 1:17 ` [092/136] tty: USB serial termios bits Greg KH
2009-10-02 1:17 ` [093/136] usb-serial: change referencing of port and serial structures Greg KH
2009-10-02 1:17 ` [094/136] usb-serial: put subroutines in logical order Greg KH
2009-10-02 1:17 ` [095/136] usb-serial: change logic of serial lookups Greg KH
2009-10-02 1:17 ` [096/136] usb-serial: acquire references when a new tty is installed Greg KH
2009-10-02 1:17 ` [097/136] usb-serial: fix termios initialization logic Greg KH
2009-10-02 1:17 ` [098/136] usb-serial: rename subroutines Greg KH
2009-10-02 1:17 ` [099/136] usb-serial: add missing tests and debug lines Greg KH
2009-10-02 1:17 ` [100/136] usb-serial: straighten out serial_open Greg KH
2009-10-02 1:17 ` [101/136] USB serial: update the console driver Greg KH
2009-10-02 1:17 ` [102/136] USB: xhci: Work around for chain bit in link TRBs Greg KH
2009-10-02 1:17 ` [103/136] USB: xhci: Fix slot and endpoint context debugging Greg KH
2009-10-02 1:17 ` [104/136] USB: xhci: Configure endpoint code refactoring Greg KH
2009-10-02 1:17 ` [105/136] USB: xhci: Set correct max packet size for HS/FS control endpoints Greg KH
2009-10-02 1:17 ` [106/136] USB: xhci: Support full speed devices Greg KH
2009-10-02 1:17 ` [107/136] USB: xhci: Handle stalled control endpoints Greg KH
2009-10-02 1:17 ` [108/136] USB: xhci: Add quirk for Fresco Logic xHCI hardware Greg KH
2009-10-02 1:17 ` [109/136] USB: xhci: Make TRB completion code comparison readable Greg KH
2009-10-02 16:38 ` David Vrabel
2009-10-02 16:53 ` [stable] " Greg KH
2009-10-02 17:23 ` David Vrabel
2009-10-02 17:35 ` Greg KH
2009-10-02 1:17 ` [110/136] USB: xhci: Handle babbling endpoints correctly Greg KH
2009-10-02 1:17 ` [111/136] USB: xhci: Dont touch xhci_td after its freed Greg KH
2009-10-02 1:17 ` [112/136] USB: xhci: Check URBs actual transfer buffer size Greg KH
2009-10-02 1:17 ` [113/136] USB: xhci: Check URB_SHORT_NOT_OK before setting short packet status Greg KH
2009-10-02 1:17 ` [114/136] USB: xhci: Set -EREMOTEIO when xHC gives bad transfer length Greg KH
2009-10-02 1:17 ` [115/136] USB: xhci: Support interrupt transfers Greg KH
2009-10-02 1:17 ` [116/136] USB: Fix SS endpoint companion descriptor parsing Greg KH
2009-10-02 1:17 ` [117/136] /proc/kcore: work around a BUG() Greg KH
2009-10-02 1:17 ` [118/136] hugetlb: restore interleaving of bootmem huge pages (2.6.31) Greg KH
2009-10-02 1:17 ` [119/136] page-allocator: limit the number of MIGRATE_RESERVE pageblocks per zone Greg KH
2009-10-02 1:17 ` Greg KH [this message]
2009-10-02 16:46 ` [120/136] mm: munlock use follow_page Hugh Dickins
2009-10-02 16:54 ` Greg KH
2009-10-02 1:17 ` [121/136] mm: fix anonymous dirtying Greg KH
2009-10-02 16:34 ` Hugh Dickins
2009-10-02 16:55 ` Greg KH
2009-10-02 1:17 ` [122/136] mmap: avoid unnecessary anon_vma lock acquisition in vma_adjust() Greg KH
2009-10-02 16:36 ` Hugh Dickins
2009-10-02 16:54 ` Greg KH
2009-10-02 1:17 ` [123/136] Fix idle time field in /proc/uptime Greg KH
2009-10-02 1:17 ` [124/136] drm/i915: Handle ERESTARTSYS during page fault Greg KH
2009-10-02 1:17 ` [125/136] em28xx: ir-kbd-i2c init data needs a persistent object Greg KH
2009-10-02 1:17 ` [126/136] saa7134: " Greg KH
2009-10-02 1:17 ` [127/136] powerpc/8xx: Fix regression introduced by cache coherency rewrite Greg KH
2009-10-02 1:17 ` [128/136] powerpc: Fix incorrect setting of __HAVE_ARCH_PTE_SPECIAL Greg KH
2009-10-02 1:17 ` [129/136] HID: completely remove apple mightymouse from blacklist Greg KH
2009-10-02 1:17 ` [130/136] [SCSI] mptsas : PAE Kernel more than 4 GB kernel panic Greg KH
2009-10-02 1:17 ` [131/136] NOMMU: Fix MAP_PRIVATE mmap() of objects where the data can be mapped directly Greg KH
2009-10-02 1:18 ` [132/136] iwlwifi: Handle new firmware file with ucode build number in header Greg KH
2009-10-02 1:18 ` [133/136] iwlwifi: update 1000 series API version to match firmware Greg KH
2009-10-02 1:18 ` [134/136] iwlagn: modify digital SVR for 1000 Greg KH
2009-10-02 1:18 ` [135/136] iwlwifi: traverse linklist to find the valid OTP block Greg KH
2009-10-02 1:18 ` [136/136] iwlwifi: fix unloading driver while scanning Greg KH
2009-10-02 5:01 ` [000/136] 2.6.31.2-stable review Eric W. Biederman
2009-10-02 5:10 ` Greg KH
2009-10-02 5:34 ` Eric W. Biederman
2009-10-02 6:06 ` Eric W. Biederman
2009-10-06 0:12 ` Daisuke Nishimura
2009-10-09 22:30 ` [Stable-review] " Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091002012426.002095979@mini.kroah.org \
--to=gregkh@suse.de \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=hugh.dickins@tiscali.co.uk \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=kosaki.motohiro@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mel@csn.ul.ie \
--cc=npiggin@suse.de \
--cc=riel@redhat.com \
--cc=stable-review@kernel.org \
--cc=stable@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox