* ATA related kernel warning after resume with 2.6.32-rc4
@ 2009-10-14 6:55 Tino Keitel
2009-10-14 7:29 ` Jeff Garzik
0 siblings, 1 reply; 3+ messages in thread
From: Tino Keitel @ 2009-10-14 6:55 UTC (permalink / raw)
To: linux-kernel
Hi,
I get this warning after resume from suspend to RAM:
ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/33
firewire_core: rediscovered device fw0
sd 2:0:1:0: [sda] Starting disk
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
------------[ cut here ]------------
WARNING: at drivers/ata/libata-core.c:5039
ata_qc_complete+0x1ec/0x260()
Hardware name: Macmini2,1
Modules linked in: ipv6 fbcon font bitblit softcursor i915
drm_kms_helper drm fb i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect
loop btusb bluetooth firewire_sbp2 snd_hda_codec_idt dvb_usb dvb_core
video backlight output snd_hda_intel firewire_ohci usblp firewire_core
sky2 snd_hda_codec evdev crc_itu_t snd_pcm snd_timer snd_page_alloc
[last unloaded: dvb_usb_vp7045]
Pid: 254, comm: ata/0 Not tainted 2.6.32-rc4-00001-gd93a8f8 #24
Call Trace:
[<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
[<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
[<ffffffff8103ceb4>] ? warn_slowpath_common+0x74/0xd0
[<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
[<ffffffff81318100>] ? ata_do_link_abort+0xa0/0xe0
[<ffffffff8131b01f>] ? ata_hsm_qc_complete+0x15f/0x170
[<ffffffff8131b1ca>] ? ata_sff_hsm_move+0x19a/0x700
[<ffffffff8131bacf>] ? ata_pio_task+0x2f/0x110
[<ffffffff8131baa0>] ? ata_pio_task+0x0/0x110
[<ffffffff8104eb8b>] ? worker_thread+0x12b/0x1f0
[<ffffffff81052ee0>] ? autoremove_wake_function+0x0/0x30
[<ffffffff8104ea60>] ? worker_thread+0x0/0x1f0
[<ffffffff81052b56>] ? kthread+0x96/0xa0
[<ffffffff8100cc1a>] ? child_rip+0xa/0x20
[<ffffffff81052ac0>] ? kthread+0x0/0xa0
[<ffffffff8100cc10>] ? child_rip+0x0/0x20
---[ end trace 158461bf60ae353f ]---
ata3.01: NODEV after polling detection
ata3.01: revalidation failed (errno=-2)
Regards,
Tino
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ATA related kernel warning after resume with 2.6.32-rc4
2009-10-14 6:55 ATA related kernel warning after resume with 2.6.32-rc4 Tino Keitel
@ 2009-10-14 7:29 ` Jeff Garzik
2009-10-14 7:40 ` Tino Keitel
0 siblings, 1 reply; 3+ messages in thread
From: Jeff Garzik @ 2009-10-14 7:29 UTC (permalink / raw)
To: tino.keitel; +Cc: linux-kernel, Linux IDE mailing list
On 10/14/2009 02:55 AM, Tino Keitel wrote:
> Hi,
>
> I get this warning after resume from suspend to RAM:
>
> ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
> ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out
> ata1.00: configured for UDMA/33
> firewire_core: rediscovered device fw0
> sd 2:0:1:0: [sda] Starting disk
> firewire_core: phy config: card 0, new root=ffc1, gap_count=5
> ------------[ cut here ]------------
> WARNING: at drivers/ata/libata-core.c:5039
> ata_qc_complete+0x1ec/0x260()
> Hardware name: Macmini2,1
> Modules linked in: ipv6 fbcon font bitblit softcursor i915
> drm_kms_helper drm fb i2c_algo_bit cfbcopyarea cfbimgblt cfbfillrect
> loop btusb bluetooth firewire_sbp2 snd_hda_codec_idt dvb_usb dvb_core
> video backlight output snd_hda_intel firewire_ohci usblp firewire_core
> sky2 snd_hda_codec evdev crc_itu_t snd_pcm snd_timer snd_page_alloc
> [last unloaded: dvb_usb_vp7045]
> Pid: 254, comm: ata/0 Not tainted 2.6.32-rc4-00001-gd93a8f8 #24
> Call Trace:
> [<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
> [<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
> [<ffffffff8103ceb4>] ? warn_slowpath_common+0x74/0xd0
> [<ffffffff8130b5ac>] ? ata_qc_complete+0x1ec/0x260
> [<ffffffff81318100>] ? ata_do_link_abort+0xa0/0xe0
> [<ffffffff8131b01f>] ? ata_hsm_qc_complete+0x15f/0x170
> [<ffffffff8131b1ca>] ? ata_sff_hsm_move+0x19a/0x700
> [<ffffffff8131bacf>] ? ata_pio_task+0x2f/0x110
> [<ffffffff8131baa0>] ? ata_pio_task+0x0/0x110
> [<ffffffff8104eb8b>] ? worker_thread+0x12b/0x1f0
> [<ffffffff81052ee0>] ? autoremove_wake_function+0x0/0x30
> [<ffffffff8104ea60>] ? worker_thread+0x0/0x1f0
> [<ffffffff81052b56>] ? kthread+0x96/0xa0
> [<ffffffff8100cc1a>] ? child_rip+0xa/0x20
> [<ffffffff81052ac0>] ? kthread+0x0/0xa0
> [<ffffffff8100cc10>] ? child_rip+0x0/0x20
> ---[ end trace 158461bf60ae353f ]---
> ata3.01: NODEV after polling detection
> ata3.01: revalidation failed (errno=-2)
Can you email your full dmesg and lspci?
Also, note that linux-ide was added to CC.
Jeff
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: ATA related kernel warning after resume with 2.6.32-rc4
2009-10-14 7:29 ` Jeff Garzik
@ 2009-10-14 7:40 ` Tino Keitel
0 siblings, 0 replies; 3+ messages in thread
From: Tino Keitel @ 2009-10-14 7:40 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-kernel, Linux IDE mailing list
[-- Attachment #1: Type: text/plain, Size: 254 bytes --]
On Wed, Oct 14, 2009 at 03:29:33 -0400, Jeff Garzik wrote:
[...]
> Can you email your full dmesg and lspci?
>
> Also, note that linux-ide was added to CC.
OK. I gzipped dmesg because I don't know if there are any related size
limits.
Regards,
Tino
[-- Attachment #2: dmesg.gz --]
[-- Type: application/x-gzip, Size: 11326 bytes --]
[-- Attachment #3: lspci --]
[-- Type: text/plain, Size: 2116 bytes --]
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
00:07.0 Performance counters [1101]: Intel Corporation Device [8086:27a3] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
01:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 22)
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
03:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 61)
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-10-14 7:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-14 6:55 ATA related kernel warning after resume with 2.6.32-rc4 Tino Keitel
2009-10-14 7:29 ` Jeff Garzik
2009-10-14 7:40 ` Tino Keitel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox