From: Jens Axboe <jens.axboe@oracle.com>
To: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
jbarnes@virtuousgeek.org, linux-pci@vger.kernel.org
Subject: Re: pci-express hotplug
Date: Wed, 14 Oct 2009 10:47:14 +0200 [thread overview]
Message-ID: <20091014084713.GO9228@kernel.dk> (raw)
In-Reply-To: <4AD5611F.6010907@jp.fujitsu.com>
[-- Attachment #1: Type: text/plain, Size: 6019 bytes --]
On Wed, Oct 14 2009, Kenji Kaneshige wrote:
> Jens Axboe wrote:
>> On Tue, Oct 13 2009, Kenji Kaneshige wrote:
>>> Jens Axboe wrote:
>>>> On Tue, Oct 13 2009, Kenji Kaneshige wrote:
>>>>> Jens Axboe wrote:
>>>>>> Hi,
>>>>>>
>>>>>> I'm trying to get pci-express hotplug working in a box here. I don't
>>>>>> really care about the hotplug aspect, I just want the darn pci-e slots
>>>>>> that are designated hotplug slots to actually WORK. When I load pciehp,
>>>>>> I get:
>>>>>>
>>>>>> Firmware did not grant requested _OSC control
>>>>>> Firmware did not grant requested _OSC control
>>>>>> Firmware did not grant requested _OSC control
>>>>>> Firmware did not grant requested _OSC control
>>>>>> pciehp 0000:00:05.0:pcie04: HPC vendor_id 8086 device_id 340c ss_vid 0 ss_did 0
>>>>>> pciehp 0000:00:05.0:pcie04: service driver pciehp loaded
>>>>>> Firmware did not grant requested _OSC control
>>>>>> pciehp 0000:00:07.0:pcie04: HPC vendor_id 8086 device_id 340e ss_vid 0 ss_did 0
>>>>>> pciehp 0000:00:07.0:pcie04: service driver pciehp loaded
>>>>>> Firmware did not grant requested _OSC control
>>>>>> pciehp 0000:80:07.0:pcie04: HPC vendor_id 8086 device_id 340e ss_vid 0 ss_did 0
>>>>>> pciehp 0000:80:07.0:pcie04: service driver pciehp loaded
>>>>>> pciehp 0000:80:09.0:pcie04: HPC vendor_id 8086 device_id 3410 ss_vid 0 ss_did 0
>>>>>> pciehp 0000:80:09.0:pcie04: service driver pciehp loaded
>>>>>> pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>>>>>>
>>>>>> and the devices in the hotplug slots stay off. Is this an ACPI/bios
>>>>>> issue? How can I debug this?
>>>>>>
>>>>> Could you give me the result of "ls -lR /sys/bus/pci/slots/"
>>>>> after loading pciehp?
>>>> I have attached the result of that ls prior to loading pciehp/acpiphp
>>>> (pre-load), after loading pciehp (pciehp-load), and with acpiphp loaded
>>>> only as well (acpiphp-load).
>>>>
>>> Thank you for the info. From the information, I confirmed that hotplug
>>> slots are detected by pciehp even though _OSC evaluation failed. There
>>> are two ways to take control from the firmware through ACPI control
>>> method. One is _OSC control method, and the other is OSHP control method.
>>> I guess your ACPI fimware has both _OSC and OSHP on DSDT (ACPI Namespace),
>>> and pciehp assumes that it took control through OSHP after the _OSC
>>> evaluation failure. I think this pciehp's behavior is wrong because of
>>> the following reasons and I think pciehp driver mis-detected the hotplug
>>> slots on your environment because of this.
>>>
>>> - According to the PCI firmware specification, pciehp driver must use the
>>> result of _OSC, if the platform implements both _OSC and OSHP.
>>> - OSHP control method seems only for SHPC, not for PCI Express native hot-
>>> plug. So pciehp must not evaluate OSHP to take control from firmware.
>>>
>>> To confirm this, could you send me the dmesg output after loading pciehp
>>> with 'debug_acpi' of pci_hotplug (PCI hotplug core driver) enabled?
>>> For example,
>>>
>>> $ su
>>> # echo Y > /sys/module/pci_hotplug/parameters/debug_acpi
>>> # modprobe pciehp
>>> # dmesg
>>
>> See below.
>>
>>> And if it is possible, could you send me DSDT of your platform?
>>
>> Not sure I can do that, I'll check.
>>
>>> Anyway, my recommendation is using acpiphp on your environment because
>>> your firmware didn't grant control over hotplug control through _OSC.
>>> From the information, acpiphp also detects the hotplug slots successfully.
>>> Please try "echo 1 > /sys/bus/pci/slots/<slot#>/power". It would turn on
>>> the slot and initialize adapter card on the slot.
>>
>> It does find the 4 slots correctly. But if I try to turn on the power,
>> nothing happens and 'power' stays at 0. If I do the same with pciehp, I
>> get the same hang as described when using pciehp with pciehp_force=1.
>> But apparently this machine is getting a board replacement very soon, so
>> it may solve itself. Unless you think it should work and there's
>> something I can try to check, then lets just leave this issue until I
>> get it upgraded and return from kernel summit / JLS.
>>
>
> Could you try pciehp with "pciehp_debug" option enabled(*), and give me
> the following information?
I've attached the output of loading pciehp with the debug option
enabled.
> - "cat /sys/bus/pci/slots/*/*" output
Attached as slots
> - dmesg output after "echo 1 > /sys/bus/pci/slots/<slot#>/power"
# echo 1 > /sys/bus/pci/slots/1/power
pciehp 0000:00:05.0:pcie04: Power fault on Slot(1)
pciehp 0000:00:05.0:pcie04: Power fault bit 0 set
pciehp 0000:00:05.0:pcie04: pcie_isr: intr_loc 2
[...]
That last line repeats infinitely.
> (*) you can enable "pciehp_debug" option as follows
>
> # modprobe pciehp pciehp_debug
>
> I'm not sure, but I think one of the possibility is that your hot-plug
> controller doesn't support power controller. On such slot, the slot is
> usually turned on automatically at adapter card insertion. So card
> re-insertion might make some difference.
The dmesg seems to suggest it has a power controller. I also tried
removing and replugging the card, which is detected:
pciehp 0000:00:05.0:pcie04: pcie_isr: intr_loc 8
pciehp 0000:00:05.0:pcie04: Presence/Notify input change
pciehp 0000:00:05.0:pcie04: Card not present on Slot(1)
pciehp 0000:00:05.0:pcie04: pcie_isr: intr_loc 8
pciehp 0000:00:05.0:pcie04: Presence/Notify input change
pciehp 0000:00:05.0:pcie04: Card present on Slot(1)
but the slot isn't powered on still.
> By the way, I would like to know if your system has SHPC based hotplug
> slots. Could you load shpchp driver and send me the
> "ls -lR /sys/bus/pci/slots/" output? And I would like to see the dmesg
> output with "debug_acpi" of pci_hotplug enabled. For example,
>
> $ su
> # echo Y > /sys/module/pci_hotplug/parameters/debug_acpi
> # modprobe shpchp
This doesn't dump anything but:
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> # ls -lR /sys/bus/pci/slots
> # dmesg
Attached.
--
Jens Axboe
[-- Attachment #2: ls-lr-slots --]
[-- Type: text/plain, Size: 2610 bytes --]
^[[0m/sys/bus/pci/slots/:
total 0
drwxr-xr-x 2 root root 0 2009-10-14 10:44 ^[[01;34m1^[[0m/
drwxr-xr-x 2 root root 0 2009-10-14 10:44 ^[[01;34m2^[[0m/
drwxr-xr-x 2 root root 0 2009-10-14 10:44 ^[[01;34m6^[[0m/
drwxr-xr-x 2 root root 0 2009-10-14 10:44 ^[[01;34m7^[[0m/
/sys/bus/pci/slots/1:
total 0
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0madapter^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0maddress^[[0m
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mattention^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mcur_bus_speed^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mlatch^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mmax_bus_speed^[[0m
lrwxrwxrwx 1 root root 0 2009-10-14 10:44 ^[[01;36mmodule^[[0m -> ^[[01;34m../../../../module/pciehp^[[0m/
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mpower^[[0m
/sys/bus/pci/slots/2:
total 0
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0madapter^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0maddress^[[0m
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mattention^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mcur_bus_speed^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mlatch^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mmax_bus_speed^[[0m
lrwxrwxrwx 1 root root 0 2009-10-14 10:44 ^[[01;36mmodule^[[0m -> ^[[01;34m../../../../module/pciehp^[[0m/
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mpower^[[0m
/sys/bus/pci/slots/6:
total 0
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0madapter^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0maddress^[[0m
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mattention^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mcur_bus_speed^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mlatch^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mmax_bus_speed^[[0m
lrwxrwxrwx 1 root root 0 2009-10-14 10:44 ^[[01;36mmodule^[[0m -> ^[[01;34m../../../../module/pciehp^[[0m/
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mpower^[[0m
/sys/bus/pci/slots/7:
total 0
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0madapter^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0maddress^[[0m
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mattention^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mcur_bus_speed^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mlatch^[[0m
-r--r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mmax_bus_speed^[[0m
lrwxrwxrwx 1 root root 0 2009-10-14 10:44 ^[[01;36mmodule^[[0m -> ^[[01;34m../../../../module/pciehp^[[0m/
-rw-r--r-- 1 root root 4096 2009-10-14 10:44 ^[[0mpower^[[0m
^[[m
[-- Attachment #3: slots --]
[-- Type: text/plain, Size: 196 bytes --]
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
pciehp 0000:
[-- Attachment #4: pciehp-load-debug --]
[-- Type: text/plain, Size: 9400 bytes --]
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
Firmware did not grant requested _OSC control
pciehp 0000:00:05.0:pcie04: Hotplug Controller:
pciehp 0000:00:05.0:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:05.0 IRQ 75
pciehp 0000:00:05.0:pcie04: Vendor ID : 0x8086
pciehp 0000:00:05.0:pcie04: Device ID : 0x340c
pciehp 0000:00:05.0:pcie04: Subsystem ID : 0x0000
pciehp 0000:00:05.0:pcie04: Subsystem Vendor ID : 0x0000
pciehp 0000:00:05.0:pcie04: PCIe Cap offset : 0x90
pciehp 0000:00:05.0:pcie04: PCI resource [7] : 0x1000@0x2000
pciehp 0000:00:05.0:pcie04: PCI resource [8] : 0x1000000@0x92900000
pciehp 0000:00:05.0:pcie04: PCI resource [9] : 0x4000000@0xc7f00000
pciehp 0000:00:05.0:pcie04: Slot Capabilities : 0x0008005b
pciehp 0000:00:05.0:pcie04: Physical Slot Number : 1
pciehp 0000:00:05.0:pcie04: Attention Button : yes
pciehp 0000:00:05.0:pcie04: Power Controller : yes
pciehp 0000:00:05.0:pcie04: MRL Sensor : no
pciehp 0000:00:05.0:pcie04: Attention Indicator : yes
pciehp 0000:00:05.0:pcie04: Power Indicator : yes
pciehp 0000:00:05.0:pcie04: Hot-Plug Surprise : no
pciehp 0000:00:05.0:pcie04: EMI Present : no
pciehp 0000:00:05.0:pcie04: Command Completed : yes
pciehp 0000:00:05.0:pcie04: Slot Status : 0x0040
pciehp 0000:00:05.0:pcie04: Slot Control : 0x07cf
pciehp 0000:00:05.0:pcie04: Link Active Reporting supported
pciehp 0000:00:05.0:pcie04: Command not completed in 1000 msec
pciehp 0000:00:05.0:pcie04: HPC vendor_id 8086 device_id 340c ss_vid 0 ss_did 0
pciehp 0000:00:05.0:pcie04: Registering domain:bus:dev=0000:08:00 sun=1
pciehp 0000:00:05.0:pcie04: get_power_status: physical_slot = 1
pciehp 0000:00:05.0:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 7c0
pciehp 0000:00:05.0:pcie04: get_attention_status: physical_slot = 1
pciehp 0000:00:05.0:pcie04: pciehp_get_attention_status: SLOTCTRL a8, value read 7c0
pciehp 0000:00:05.0:pcie04: get_latch_status: physical_slot = 1
pciehp 0000:00:05.0:pcie04: get_adapter_status: physical_slot = 1
pciehp 0000:00:05.0:pcie04: Command not completed in 1000 msec
pciehp 0000:00:05.0:pcie04: service driver pciehp loaded
Firmware did not grant requested _OSC control
pciehp 0000:00:07.0:pcie04: Hotplug Controller:
pciehp 0000:00:07.0:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:00:07.0 IRQ 76
pciehp 0000:00:07.0:pcie04: Vendor ID : 0x8086
pciehp 0000:00:07.0:pcie04: Device ID : 0x340e
pciehp 0000:00:07.0:pcie04: Subsystem ID : 0x0000
pciehp 0000:00:07.0:pcie04: Subsystem Vendor ID : 0x0000
pciehp 0000:00:07.0:pcie04: PCIe Cap offset : 0x90
pciehp 0000:00:07.0:pcie04: PCI resource [7] : 0x1000@0x1000
pciehp 0000:00:07.0:pcie04: PCI resource [8] : 0x1000000@0x91900000
pciehp 0000:00:07.0:pcie04: PCI resource [9] : 0x4000000@0xcbf00000
pciehp 0000:00:07.0:pcie04: Slot Capabilities : 0x0010005b
pciehp 0000:00:07.0:pcie04: Physical Slot Number : 2
pciehp 0000:00:07.0:pcie04: Attention Button : yes
pciehp 0000:00:07.0:pcie04: Power Controller : yes
pciehp 0000:00:07.0:pcie04: MRL Sensor : no
pciehp 0000:00:07.0:pcie04: Attention Indicator : yes
pciehp 0000:00:07.0:pcie04: Power Indicator : yes
pciehp 0000:00:07.0:pcie04: Hot-Plug Surprise : no
pciehp 0000:00:07.0:pcie04: EMI Present : no
pciehp 0000:00:07.0:pcie04: Command Completed : yes
pciehp 0000:00:07.0:pcie04: Slot Status : 0x0000
pciehp 0000:00:07.0:pcie04: Slot Control : 0x07cf
pciehp 0000:00:07.0:pcie04: Link Active Reporting supported
pciehp 0000:00:07.0:pcie04: Command not completed in 1000 msec
pciehp 0000:00:07.0:pcie04: HPC vendor_id 8086 device_id 340e ss_vid 0 ss_did 0
pciehp 0000:00:07.0:pcie04: Registering domain:bus:dev=0000:0b:00 sun=2
pciehp 0000:00:07.0:pcie04: get_power_status: physical_slot = 2
pciehp 0000:00:07.0:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 7c0
pciehp 0000:00:07.0:pcie04: get_attention_status: physical_slot = 2
pciehp 0000:00:07.0:pcie04: pciehp_get_attention_status: SLOTCTRL a8, value read 7c0
pciehp 0000:00:07.0:pcie04: get_latch_status: physical_slot = 2
pciehp 0000:00:07.0:pcie04: get_adapter_status: physical_slot = 2
pciehp 0000:00:07.0:pcie04: Command not completed in 1000 msec
pciehp 0000:00:07.0:pcie04: Command not completed in 1000 msec
pciehp 0000:00:07.0:pcie04: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400
pciehp 0000:00:07.0:pcie04: service driver pciehp loaded
Firmware did not grant requested _OSC control
pciehp 0000:80:07.0:pcie04: Hotplug Controller:
pciehp 0000:80:07.0:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:80:07.0 IRQ 84
pciehp 0000:80:07.0:pcie04: Vendor ID : 0x8086
pciehp 0000:80:07.0:pcie04: Device ID : 0x340e
pciehp 0000:80:07.0:pcie04: Subsystem ID : 0x0000
pciehp 0000:80:07.0:pcie04: Subsystem Vendor ID : 0x0000
pciehp 0000:80:07.0:pcie04: PCIe Cap offset : 0x90
pciehp 0000:80:07.0:pcie04: PCI resource [7] : 0x1000@0x9000
pciehp 0000:80:07.0:pcie04: PCI resource [8] : 0x1000000@0xd1000000
pciehp 0000:80:07.0:pcie04: PCI resource [9] : 0x4000000@0xf3f00000
pciehp 0000:80:07.0:pcie04: Slot Capabilities : 0x0030005b
pciehp 0000:80:07.0:pcie04: Physical Slot Number : 6
pciehp 0000:80:07.0:pcie04: Attention Button : yes
pciehp 0000:80:07.0:pcie04: Power Controller : yes
pciehp 0000:80:07.0:pcie04: MRL Sensor : no
pciehp 0000:80:07.0:pcie04: Attention Indicator : yes
pciehp 0000:80:07.0:pcie04: Power Indicator : yes
pciehp 0000:80:07.0:pcie04: Hot-Plug Surprise : no
pciehp 0000:80:07.0:pcie04: EMI Present : no
pciehp 0000:80:07.0:pcie04: Command Completed : yes
pciehp 0000:80:07.0:pcie04: Slot Status : 0x0000
pciehp 0000:80:07.0:pcie04: Slot Control : 0x07cf
pciehp 0000:80:07.0:pcie04: Link Active Reporting supported
pciehp 0000:80:07.0:pcie04: Command not completed in 1000 msec
pciehp 0000:80:07.0:pcie04: HPC vendor_id 8086 device_id 340e ss_vid 0 ss_did 0
pciehp 0000:80:07.0:pcie04: Registering domain:bus:dev=0000:84:00 sun=6
pciehp 0000:80:07.0:pcie04: get_power_status: physical_slot = 6
pciehp 0000:80:07.0:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 7c0
pciehp 0000:80:07.0:pcie04: get_attention_status: physical_slot = 6
pciehp 0000:80:07.0:pcie04: pciehp_get_attention_status: SLOTCTRL a8, value read 7c0
pciehp 0000:80:07.0:pcie04: get_latch_status: physical_slot = 6
pciehp 0000:80:07.0:pcie04: get_adapter_status: physical_slot = 6
pciehp 0000:80:07.0:pcie04: Command not completed in 1000 msec
pciehp 0000:80:07.0:pcie04: Command not completed in 1000 msec
pciehp 0000:80:07.0:pcie04: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400
pciehp 0000:80:07.0:pcie04: service driver pciehp loaded
pciehp 0000:80:09.0:pcie04: Hotplug Controller:
pciehp 0000:80:09.0:pcie04: Seg/Bus/Dev/Func/IRQ : 0000:80:09.0 IRQ 85
pciehp 0000:80:09.0:pcie04: Vendor ID : 0x8086
pciehp 0000:80:09.0:pcie04: Device ID : 0x3410
pciehp 0000:80:09.0:pcie04: Subsystem ID : 0x0000
pciehp 0000:80:09.0:pcie04: Subsystem Vendor ID : 0x0000
pciehp 0000:80:09.0:pcie04: PCIe Cap offset : 0x90
pciehp 0000:80:09.0:pcie04: PCI resource [7] : 0x1000@0x8000
pciehp 0000:80:09.0:pcie04: PCI resource [8] : 0x1000000@0xd0000000
pciehp 0000:80:09.0:pcie04: PCI resource [9] : 0x4000000@0xf7f00000
pciehp 0000:80:09.0:pcie04: Slot Capabilities : 0x0038005b
pciehp 0000:80:09.0:pcie04: Physical Slot Number : 7
pciehp 0000:80:09.0:pcie04: Attention Button : yes
pciehp 0000:80:09.0:pcie04: Power Controller : yes
pciehp 0000:80:09.0:pcie04: MRL Sensor : no
pciehp 0000:80:09.0:pcie04: Attention Indicator : yes
pciehp 0000:80:09.0:pcie04: Power Indicator : yes
pciehp 0000:80:09.0:pcie04: Hot-Plug Surprise : no
pciehp 0000:80:09.0:pcie04: EMI Present : no
pciehp 0000:80:09.0:pcie04: Command Completed : yes
pciehp 0000:80:09.0:pcie04: Slot Status : 0x0000
pciehp 0000:80:09.0:pcie04: Slot Control : 0x07cf
pciehp 0000:80:09.0:pcie04: Link Active Reporting supported
pciehp 0000:80:09.0:pcie04: Command not completed in 1000 msec
pciehp 0000:80:09.0:pcie04: HPC vendor_id 8086 device_id 3410 ss_vid 0 ss_did 0
pciehp 0000:80:09.0:pcie04: Registering domain:bus:dev=0000:87:00 sun=7
pciehp 0000:80:09.0:pcie04: get_power_status: physical_slot = 7
pciehp 0000:80:09.0:pcie04: pciehp_get_power_status: SLOTCTRL a8 value read 7c0
pciehp 0000:80:09.0:pcie04: get_attention_status: physical_slot = 7
pciehp 0000:80:09.0:pcie04: pciehp_get_attention_status: SLOTCTRL a8, value read 7c0
pciehp 0000:80:09.0:pcie04: get_latch_status: physical_slot = 7
pciehp 0000:80:09.0:pcie04: get_adapter_status: physical_slot = 7
pciehp 0000:80:09.0:pcie04: Command not completed in 1000 msec
pciehp 0000:80:09.0:pcie04: Command not completed in 1000 msec
pciehp 0000:80:09.0:pcie04: pciehp_power_off_slot: SLOTCTRL a8 write cmd 400
pciehp 0000:80:09.0:pcie04: service driver pciehp loaded
pciehp: pcie_port_service_register = 0
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
next prev parent reply other threads:[~2009-10-14 8:47 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-12 12:06 pci-express hotplug Jens Axboe
2009-10-12 14:52 ` Greg KH
2009-10-12 14:57 ` Jens Axboe
2009-10-12 15:00 ` Mark Lord
2009-10-12 15:06 ` Jens Axboe
2009-10-12 21:48 ` Alex Chiang
2009-10-13 8:29 ` Jens Axboe
2009-10-13 17:27 ` Alex Chiang
2009-10-14 8:13 ` Jens Axboe
2009-10-20 19:07 ` Alex Chiang
2009-10-26 10:54 ` Jens Axboe
2009-10-27 2:48 ` Alex Chiang
2009-10-27 8:26 ` Jens Axboe
2009-10-27 8:34 ` Jens Axboe
2009-10-27 15:15 ` Alex Chiang
2009-10-28 9:18 ` Jens Axboe
2009-10-28 19:55 ` Alex Chiang
2009-10-29 18:55 ` Jens Axboe
2009-10-28 20:46 ` Alex Chiang
2009-10-28 21:39 ` Alex Chiang
2009-10-29 8:57 ` Jens Axboe
2009-10-27 6:31 ` Kenji Kaneshige
2009-10-27 8:27 ` Jens Axboe
2009-10-27 8:36 ` Jens Axboe
2009-10-27 8:46 ` Kenji Kaneshige
2009-10-28 6:15 ` Kenji Kaneshige
2009-10-28 9:23 ` Jens Axboe
2009-10-29 7:44 ` Kenji Kaneshige
2009-10-29 8:58 ` Jens Axboe
2009-10-29 9:23 ` Kenji Kaneshige
2009-10-29 9:24 ` Jens Axboe
2009-11-02 5:27 ` Kenji Kaneshige
2009-10-13 3:19 ` Kenji Kaneshige
2009-10-13 8:31 ` Jens Axboe
2009-10-13 10:48 ` Kenji Kaneshige
2009-10-13 11:25 ` Jens Axboe
2009-10-14 5:26 ` Kenji Kaneshige
2009-10-14 8:47 ` Jens Axboe [this message]
2009-10-15 5:41 ` Kenji Kaneshige
2009-10-15 9:42 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091014084713.GO9228@kernel.dk \
--to=jens.axboe@oracle.com \
--cc=jbarnes@virtuousgeek.org \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox