Re: [lm-sensors] lm-sensors 3.1.1-3 not detecting sensors on Intel DP55KG motherboard? (chip ID: 0xb473)

[Jean Delvare <khali@linux-fr.org>]

Hi Justin,

On 13/14 Oct 2009, Justin Piszcz wrote:
> # uname -a
> Linux box 2.6.31.3 #2 SMP Wed Oct 14 04:55:36 EDT 2009 x86_64 GNU/Linux
> 
> I have a DP55KG motherboard, it says Ibex support was added here:
> http://www.lm-sensors.org/changeset/5375
> 
> # sensors
> No sensors found!
> Make sure you loaded all the kernel drivers you need.
> Try sensors-detect to find out which these are.
> 
> I have all of the modules compiled into the kernel and sensors-detect does 
> not find anything.
> 
> 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05)
> 
> Any ideas?

The "Ibex support" in question only refers to the SMBus controller, not
to sensors directly.

> I tried w83627ehf, to no avail:
>
> # modprobe w83627ehf
> FATAL: Error inserting w83627ehf 
> (/lib/modules/2.6.31.3/kernel/drivers/hwmon/w83627ehf.ko): No such device
>
> (...)
> With debugging enabled:
> 
> [56208.376451] w83627ehf: unsupported chip ID: 0xb473
> 
> Is there anything else needed from me/info about the board or once this ID 
> is added into the kernel/src/etc it will work properly?

We have never heard of this chip ID. This must be a brand new
Winbond/Nuvoton Super-I/O chip. Please look at the motherboard, search
for the Super-I/O and report the top marking. You may also find its
name in the user manual (but the top marking is even more reliable.)

-- 
Jean Delvare