From: Alex Chiang <achiang@hp.com>
To: Jens Axboe <jens.axboe@oracle.com>
Cc: Mark Lord <lkml@rtr.ca>, Greg KH <greg@kroah.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
jbarnes@virtuousgeek.org, linux-pci@vger.kernel.org
Subject: Re: pci-express hotplug
Date: Tue, 20 Oct 2009 13:07:07 -0600 [thread overview]
Message-ID: <20091020190707.GA25615@ldl.fc.hp.com> (raw)
In-Reply-To: <20091014081309.GM9228@kernel.dk>
* Jens Axboe <jens.axboe@oracle.com>:
> On Tue, Oct 13 2009, Alex Chiang wrote:
> > > > Can you modprobe acpiphp with debug=1? And send the output?
> > >
> > > acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> > > acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:00:05.0
> > > acpiphp_glue: found ACPI PCI Hotplug slot 1 at PCI 0000:08:00
> > > acpiphp: Slot [1] registered
> > > acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:00:07.0
> > > acpiphp_glue: found ACPI PCI Hotplug slot 2 at PCI 0000:0b:00
> > > acpiphp: Slot [2] registered
> > > acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:80:07.0
> > > acpiphp_glue: found ACPI PCI Hotplug slot 6 at PCI 0000:84:00
> > > acpiphp: Slot [6] registered
> > > acpiphp_glue: found PCI-to-PCI bridge at PCI 0000:80:09.0
> > > acpiphp_glue: found ACPI PCI Hotplug slot 7 at PCI 0000:87:00
> > > acpiphp: Slot [7] registered
> > > acpiphp_glue: Bus 0000:87 has 1 slot
> > > acpiphp_glue: Bus 0000:84 has 1 slot
> > > acpiphp_glue: Bus 0000:0b has 1 slot
> > > acpiphp_glue: Bus 0000:08 has 1 slot
> > > acpiphp_glue: Total 4 slots
> >
> > You mentioned in another mail that you echoed 1 into the various
> > slots' power files.
> >
> > Did you do that after modprobing acpiphp with debug=1?
> >
> > If so, there should be debug output when you try and turn them
> > on.
>
> It produces:
>
> acpiphp: enable_slot - physical_slot = 1
> acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
> acpiphp: enable_slot - physical_slot = 2
> acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
> acpiphp: enable_slot - physical_slot = 6
> acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
> acpiphp: enable_slot - physical_slot = 7
> acpiphp_glue: acpiphp_enable_slot: Slot status is not ACPI_STA_ALL
Hm, so for some reason, firmware on your machine is telling us
that it doesn't think cards are present and/or enabled.
Unfortunately, I don't know why your firmware would be saying
that. We could add some more debug printks to see what firmware
thinks about your system... Or we could just wait and see what
happens after you get your hardware replaced.
> I have a card in one of the slots only this time.
>
> > Also, quick dummy check, you are trying to power on populated
> > slots, right? :)
>
> Yes :-)
>
> > Can you send the output of lspci -vv? And I like the output of
> > lspci -vt as well... Both before and after loading acpiphp
> > please.
>
> Send privately.
No difference in before and after. Odd.
If you want to poke us again after your hardware swap, please do
so. Sorry for being not so helpful. :-/
/ac
next prev parent reply other threads:[~2009-10-20 19:07 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-12 12:06 pci-express hotplug Jens Axboe
2009-10-12 14:52 ` Greg KH
2009-10-12 14:57 ` Jens Axboe
2009-10-12 15:00 ` Mark Lord
2009-10-12 15:06 ` Jens Axboe
2009-10-12 21:48 ` Alex Chiang
2009-10-13 8:29 ` Jens Axboe
2009-10-13 17:27 ` Alex Chiang
2009-10-14 8:13 ` Jens Axboe
2009-10-20 19:07 ` Alex Chiang [this message]
2009-10-26 10:54 ` Jens Axboe
2009-10-27 2:48 ` Alex Chiang
2009-10-27 8:26 ` Jens Axboe
2009-10-27 8:34 ` Jens Axboe
2009-10-27 15:15 ` Alex Chiang
2009-10-28 9:18 ` Jens Axboe
2009-10-28 19:55 ` Alex Chiang
2009-10-29 18:55 ` Jens Axboe
2009-10-28 20:46 ` Alex Chiang
2009-10-28 21:39 ` Alex Chiang
2009-10-29 8:57 ` Jens Axboe
2009-10-27 6:31 ` Kenji Kaneshige
2009-10-27 8:27 ` Jens Axboe
2009-10-27 8:36 ` Jens Axboe
2009-10-27 8:46 ` Kenji Kaneshige
2009-10-28 6:15 ` Kenji Kaneshige
2009-10-28 9:23 ` Jens Axboe
2009-10-29 7:44 ` Kenji Kaneshige
2009-10-29 8:58 ` Jens Axboe
2009-10-29 9:23 ` Kenji Kaneshige
2009-10-29 9:24 ` Jens Axboe
2009-11-02 5:27 ` Kenji Kaneshige
2009-10-13 3:19 ` Kenji Kaneshige
2009-10-13 8:31 ` Jens Axboe
2009-10-13 10:48 ` Kenji Kaneshige
2009-10-13 11:25 ` Jens Axboe
2009-10-14 5:26 ` Kenji Kaneshige
2009-10-14 8:47 ` Jens Axboe
2009-10-15 5:41 ` Kenji Kaneshige
2009-10-15 9:42 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091020190707.GA25615@ldl.fc.hp.com \
--to=achiang@hp.com \
--cc=greg@kroah.com \
--cc=jbarnes@virtuousgeek.org \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lkml@rtr.ca \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox