From: Sukadev Bhattiprolu <sukadev@us.ibm.com>
To: linux-kernel@vger.kernel.org
Cc: arnd@arndb.de, Containers <containers@lists.linux-foundation.org>,
"Eric W. Biederman" <ebiederm@xmission.com>,
hpa@zytor.com, Alexey Dobriyan <adobriyan@gmail.com>,
roland@redhat.com, Pavel Emelyanov <xemul@openvz.org>,
serue@us.ibm.com, Oren Laadan <orenl@cs.columbia.edu>
Subject: [v11][PATCH 3/9] Define set_pidmap() function
Date: Wed, 4 Nov 2009 21:38:15 -0800 [thread overview]
Message-ID: <20091105053815.GC16142@us.ibm.com> (raw)
In-Reply-To: <20091105053053.GA11289@us.ibm.com>
From: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Subject: [v11][PATCH 3/9] Define set_pidmap() function
Define a set_pidmap() interface which is like alloc_pidmap() only that
caller specifies the pid number to be assigned.
Changelog[v9]:
- Completely rewrote this patch based on Eric Biederman's code.
Changelog[v7]:
- [Eric Biederman] Generalize alloc_pidmap() to take a range of pids.
Changelog[v6]:
- Separate target_pid > 0 case to minimize the number of checks needed.
Changelog[v3]:
- (Eric Biederman): Avoid set_pidmap() function. Added couple of
checks for target_pid in alloc_pidmap() itself.
Changelog[v2]:
- (Serge Hallyn) Check for 'pid < 0' in set_pidmap().(Code
actually checks for 'pid <= 0' for completeness).
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Acked-by: Oren Laadan <orenl@cs.columbia.edu>
---
kernel/pid.c | 41 +++++++++++++++++++++++++++++++++--------
1 files changed, 33 insertions(+), 8 deletions(-)
diff --git a/kernel/pid.c b/kernel/pid.c
index c4d9914..c849327 100644
--- a/kernel/pid.c
+++ b/kernel/pid.c
@@ -147,18 +147,19 @@ static int alloc_pidmap_page(struct pidmap *map)
return 0;
}
-static int alloc_pidmap(struct pid_namespace *pid_ns)
+static int do_alloc_pidmap(struct pid_namespace *pid_ns, int last, int min,
+ int max)
{
- int i, offset, max_scan, pid, last = pid_ns->last_pid;
+ int i, offset, max_scan, pid;
int rc = -EAGAIN;
struct pidmap *map;
pid = last + 1;
if (pid >= pid_max)
- pid = RESERVED_PIDS;
+ pid = min;
offset = pid & BITS_PER_PAGE_MASK;
map = &pid_ns->pidmap[pid/BITS_PER_PAGE];
- max_scan = (pid_max + BITS_PER_PAGE - 1)/BITS_PER_PAGE - !offset;
+ max_scan = (max + BITS_PER_PAGE - 1)/BITS_PER_PAGE - !offset;
for (i = 0; i <= max_scan; ++i) {
rc = alloc_pidmap_page(map);
if (rc)
@@ -168,7 +169,6 @@ static int alloc_pidmap(struct pid_namespace *pid_ns)
do {
if (!test_and_set_bit(offset, map->page)) {
atomic_dec(&map->nr_free);
- pid_ns->last_pid = pid;
return pid;
}
offset = find_next_offset(map, offset);
@@ -179,16 +179,16 @@ static int alloc_pidmap(struct pid_namespace *pid_ns)
* bitmap block and the final block was the same
* as the starting point, pid is before last_pid.
*/
- } while (offset < BITS_PER_PAGE && pid < pid_max &&
+ } while (offset < BITS_PER_PAGE && pid < max &&
(i != max_scan || pid < last ||
!((last+1) & BITS_PER_PAGE_MASK)));
}
- if (map < &pid_ns->pidmap[(pid_max-1)/BITS_PER_PAGE]) {
+ if (map < &pid_ns->pidmap[(max-1)/BITS_PER_PAGE]) {
++map;
offset = 0;
} else {
map = &pid_ns->pidmap[0];
- offset = RESERVED_PIDS;
+ offset = min;
if (unlikely(last == offset)) {
rc = -EAGAIN;
break;
@@ -199,6 +199,31 @@ static int alloc_pidmap(struct pid_namespace *pid_ns)
return rc;
}
+static int alloc_pidmap(struct pid_namespace *pid_ns)
+{
+ int nr;
+
+ nr = do_alloc_pidmap(pid_ns, pid_ns->last_pid, RESERVED_PIDS, pid_max);
+ if (nr >= 0)
+ pid_ns->last_pid = nr;
+ return nr;
+}
+
+static int set_pidmap(struct pid_namespace *pid_ns, int target)
+{
+ if (!target)
+ return alloc_pidmap(pid_ns);
+
+ if (target >= pid_max)
+ return -EINVAL;
+
+ if ((target < 0) || (target < RESERVED_PIDS &&
+ pid_ns->last_pid >= RESERVED_PIDS))
+ return -EINVAL;
+
+ return do_alloc_pidmap(pid_ns, target - 1, target, target + 1);
+}
+
int next_pidmap(struct pid_namespace *pid_ns, int last)
{
int offset;
--
1.6.0.4
next prev parent reply other threads:[~2009-11-05 5:37 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-05 5:30 [v11][PATCH 0/9] Implement clone_with_pids() system call Sukadev Bhattiprolu
2009-11-05 5:36 ` [v11][PATCH 1/9] Factor out code to allocate pidmap page Sukadev Bhattiprolu
2009-11-05 5:37 ` [v11][PATCH 2/9] Have alloc_pidmap() return actual error code Sukadev Bhattiprolu
2009-11-05 5:38 ` Sukadev Bhattiprolu [this message]
2009-11-05 5:38 ` [v11][PATCH 4/9] Add target_pids parameter to alloc_pid() Sukadev Bhattiprolu
2009-11-05 5:39 ` [v11][PATCH 5/9] Add target_pids parameter to copy_process() Sukadev Bhattiprolu
2009-11-05 5:40 ` [v11][PATCH 6/9] Check invalid clone flags Sukadev Bhattiprolu
2009-11-05 5:40 ` [v11][PATCH 7/9] Define do_fork_with_pids() Sukadev Bhattiprolu
2009-11-05 5:41 ` [v11][PATCH 8/9] Define clone_with_pids() syscall Sukadev Bhattiprolu
2009-11-06 18:02 ` Serge E. Hallyn
2009-11-07 20:18 ` Sukadev Bhattiprolu
2009-11-09 20:37 ` Serge E. Hallyn
2009-11-05 5:42 ` [v11][PATCH 9/9] Document " Sukadev Bhattiprolu
2009-11-06 18:39 ` Serge E. Hallyn
2009-11-06 20:18 ` Matt Helsley
2009-11-06 21:45 ` Matt Helsley
2009-11-07 2:26 ` Sukadev Bhattiprolu
2009-11-07 21:56 ` Oren Laadan
2009-11-08 15:09 ` Serge E. Hallyn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091105053815.GC16142@us.ibm.com \
--to=sukadev@us.ibm.com \
--cc=adobriyan@gmail.com \
--cc=arnd@arndb.de \
--cc=containers@lists.linux-foundation.org \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=orenl@cs.columbia.edu \
--cc=roland@redhat.com \
--cc=serue@us.ibm.com \
--cc=xemul@openvz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox