From: Andrew Morton <akpm@linux-foundation.org>
To: Miao Xie <miaox@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Ingo Molnar <mingo@elte.hu>,
Linux-Kernel <linux-kernel@vger.kernel.org>,
containers@lists.linux-foundation.org
Subject: Re: [BUG] cpu controller can't provide fair CPU time for each group
Date: Mon, 9 Nov 2009 16:22:58 -0800 [thread overview]
Message-ID: <20091109162258.25d3f202.akpm@linux-foundation.org> (raw)
In-Reply-To: <4AF23EC0.2070606@cn.fujitsu.com>
(cc containers@lists.linux-foundation.org)
On Thu, 05 Nov 2009 11:56:00 +0900
Miao Xie <miaox@cn.fujitsu.com> wrote:
> Hi, Ingo
>
> Could you see the following problems?
>
> Regards
> Miao
>
> on 2009-11-3 11:26, Miao Xie wrote:
> > Hi, Peter.
> >
> > I found two problems about cpu controller:
> > 1) cpu controller didn't provide fair CPU time to groups when the tasks
> > attached into those groups were bound to the same logic CPU.
> > 2) cpu controller didn't provide fair CPU time to groups when shares of
> > each group <= 2 * nr_cpus.
> >
> > The detail is following:
> > 1) The first one is that cpu controller didn't provide fair CPU time to
> > groups when the tasks attached into those groups were bound to the
> > same logic CPU.
> >
> > The reason is that there is something with the computing of the per
> > cpu shares.
> >
> > on my test box with 16 logic CPU, I did the following manipulation:
> > a. create 2 cpu controller groups.
> > b. attach a task into one group and 2 tasks into the other.
> > c. bind three tasks to the same logic cpu.
> > +--------+ +--------+
> > | group1 | | group2 |
> > +--------+ +--------+
> > | |
> > CPU0 Task A Task B & Task C
> >
> > The following is the reproduce steps:
> > # mkdir /dev/cpuctl
> > # mount -t cgroup -o cpu,noprefix cpuctl /dev/cpuctl
> > # mkdir /dev/cpuctl/1
> > # mkdir /dev/cpuctl/2
> > # cat /dev/zero > /dev/null &
> > # pid1=$!
> > # echo $pid1 > /dev/cpuctl/1/tasks
> > # taskset -p -c 0 $pid1
> > # cat /dev/zero > /dev/null &
> > # pid2=$!
> > # echo $pid2 > /dev/cpuctl/2/tasks
> > # taskset -p -c 0 $pid2
> > # cat /dev/zero > /dev/null &
> > # pid3=$!
> > # echo $pid3 > /dev/cpuctl/2/tasks
> > # taskset -p -c 0 $pid3
> >
> > some time later, I found the the task in the group1 got the 35% CPU
> > time not
> > 50% CPU time. It was very strange that this result against the expected.
> >
> > this problem was caused by the wrong computing of the per cpu shares.
> > According to the design of the cpu controller, the shares of each cpu
> > controller group will be divided for every CPU by the workload of each
> > logic CPU.
> > cpu[i] shares = group shares * CPU[i] workload / sum(CPU workload)
> >
> > But if the CPU has no task, cpu controller will pretend there is one of
> > average load, usually this average load is 1024, the load of the task
> > whose
> > nice is zero. So in the test, the shares of group1 on CPU0 is:
> > 1024 * (1 * 1024) / ((1 * 1024 + 15 * 1024)) = 64
> > and the shares of group2 on CPU0 is:
> > 1024 * (2 * 1024) / ((2 * 1024 + 15 * 1024)) = 120
> > The scheduler of the CPU0 provided CPU time to each group by the shares
> > above. The bug occured.
> >
> > 2) The second problem is that cpu controller didn't provide fair CPU
> > time to
> > groups when shares of each group <= 2 * nr_cpus
> >
> > The reason is that per cpu shares was set to MIN_SHARES(=2) if shares of
> > each group <= 2 * nr_cpus.
> >
> > on the test box with 16 logic CPU, we do the following test:
> > a. create two cpu controller groups
> > b. attach 32 tasks into each group
> > c. set shares of the first group to 16, the other to 32
> > +--------+ +--------+
> > | group1 | | group2 |
> > +--------+ +--------+
> > |shares=16 |shares=32
> > | |
> > 16 Tasks 32 Tasks
> >
> > some time later, the first group got 50% CPU time, not 33%. It also
> > was very
> > strange that this result against the expected.
> >
> > It is because the shares of cpuctl group was small, and there is many
> > logic
> > CPU. So per cpu shares that was computed was less than MIN_SHARES,
> > and then
> > was set to MIN_SHARES.
> >
> > Maybe 16 and 32 is not used usually. We can set a usual number(such
> > as 1024)
> > to avoid this problem on my box. But the number of CPU on a machine will
> > become more and more in the future. If the number of CPU is greater
> > than 512,
> > this bug will occur even we set shares of group to 1024. This is a usual
> > number. At this rate, the usual user will feel strange.
> >
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
> >
> >
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2009-11-10 0:23 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-03 2:26 [BUG] cpu controller can't provide fair CPU time for each group Miao Xie
2009-11-05 2:56 ` Miao Xie
2009-11-10 0:22 ` Andrew Morton [this message]
2009-11-10 9:48 ` Peter Zijlstra
2009-11-11 6:21 ` Yasunori Goto
2009-11-11 7:20 ` Peter Zijlstra
2009-11-11 9:59 ` Yasunori Goto
2009-11-11 20:39 ` Chris Friesen
2009-11-11 20:51 ` Peter Zijlstra
2009-11-11 10:07 ` Peter Zijlstra
2009-11-12 1:12 ` Yasunori Goto
2009-11-19 7:09 ` Yasunori Goto
2009-12-09 9:55 ` [tip:sched/urgent] sched: cgroup: Implement different treatment for idle shares tip-bot for Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091109162258.25d3f202.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=a.p.zijlstra@chello.nl \
--cc=containers@lists.linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miaox@cn.fujitsu.com \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox