From: Peter Feuerer <peter@piie.net>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
Borislav Petkov <petkovbb@googlemail.com>,
lenb@kernel.org, Andreas Mohr <andi@lisas.de>,
Peter Feuerer <peter@piie.net>
Subject: [PATCH 2/2] acerhdf: Added new BIOS versions
Date: Mon, 9 Nov 2009 18:53:35 +0100 [thread overview]
Message-ID: <20091109185335.26836808.peter@piie.net> (raw)
In-Reply-To: <20091109185105.6028c057.peter@piie.net>
Added new BIOS versions for following netbooks: Acer 1410, Gateway LT31,
Packard Bell DOA150. As the Gateway LT31 machines have different
register values for setting and checking the off-state, the "cmd_off"
variable has been splitted up to "cmd_off" and "chk_off".
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Borislav Petkov <petkovbb@gmail.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Len Brown <lenb@kernel.org>
---
drivers/platform/x86/acerhdf.c | 63 +++++++++++++++++++++++----------------
1 files changed, 37 insertions(+), 26 deletions(-)
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index ab64522..d8b4229 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -52,7 +52,7 @@
*/
#undef START_IN_KERNEL_MODE
-#define DRV_VER "0.5.18"
+#define DRV_VER "0.5.20"
/*
* According to the Atom N270 datasheet,
@@ -112,12 +112,14 @@ module_param_string(force_product, force_product, 16, 0);
MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check");
/*
- * cmd_off: to switch the fan completely off / to check if the fan is off
+ * cmd_off: to switch the fan completely off
+ * chk_off: to check if the fan is off
* cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
* the fan speed depending on the temperature
*/
struct fancmd {
u8 cmd_off;
+ u8 chk_off;
u8 cmd_auto;
};
@@ -134,32 +136,41 @@ struct bios_settings_t {
/* Register addresses and values for different BIOS versions */
static const struct bios_settings_t bios_tbl[] = {
/* AOA110 */
- {"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
- {"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
- {"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
- {"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
- {"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
- {"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0x00} },
- {"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
- {"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
- {"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+ {"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x1f, 0x00} },
+ {"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x1f, 0x00} },
+ {"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3307", 0x55, 0x58, {0xaf, 0xaf, 0x00} },
+ {"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x21, 0x00} },
+ {"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x21, 0x00} },
+ {"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x21, 0x00} },
/* AOA150 */
- {"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x20, 0x00} },
- {"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x00} },
- {"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00} },
- {"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00} },
- {"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x00} },
- {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} },
- {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} },
- {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3301", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3307", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ /* Acer 1410 */
+ {"Acer", "Aspire 1410", "v0.3120", 0x55, 0x58, {0x9e, 0x9e, 0x00} },
/* special BIOS / other */
- {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
- {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} },
- {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} },
- {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
- {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} },
+ {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x21, 0x00} },
+ {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Gateway ", "LT31 ", "v1.3103 ", 0x55, 0x58,
+ {0x10, 0x0f, 0x00} },
+ {"Gateway ", "LT31 ", "v1.3201 ", 0x55, 0x58,
+ {0x10, 0x0f, 0x00} },
+ {"Gateway ", "LT31 ", "v1.3302 ", 0x55, 0x58,
+ {0x10, 0x0f, 0x00} },
+ {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x21, 0x00} },
+ {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} },
+ {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x21, 0x00} },
+ {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x20, 0x00} },
/* pewpew-terminator */
- {"", "", "", 0, 0, {0, 0} }
+ {"", "", "", 0, 0, {0, 0, 0} }
};
static const struct bios_settings_t *bios_cfg __read_mostly;
@@ -183,7 +194,7 @@ static int acerhdf_get_fanstate(int *state)
if (ec_read(bios_cfg->fanreg, &fan))
return -EINVAL;
- if (fan != bios_cfg->cmd.cmd_off)
+ if (fan != bios_cfg->cmd.chk_off)
*state = ACERHDF_FAN_AUTO;
else
*state = ACERHDF_FAN_OFF;
--
1.6.5.2
next prev parent reply other threads:[~2009-11-09 17:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-09 17:51 [PATCH 1/2] acerhdf: Return temperature in milidegree instead of degree Peter Feuerer
2009-11-09 17:53 ` Peter Feuerer [this message]
2009-11-11 23:29 ` [PATCH 2/2] acerhdf: Added new BIOS versions Andrew Morton
2009-11-25 21:43 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091109185335.26836808.peter@piie.net \
--to=peter@piie.net \
--cc=akpm@linux-foundation.org \
--cc=andi@lisas.de \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=petkovbb@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox