From: Andreas Herrmann <herrmann.der.user@googlemail.com>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: linux-kernel@vger.kernel.org, dimm <dmitry.adamushko@gmail.com>
Subject: [PATCH 3/3] x86, ucode-amd: printk(KERN_* to pr_* conversion
Date: Tue, 10 Nov 2009 12:09:20 +0100 [thread overview]
Message-ID: <20091110110920.GJ30802@alberich.amd.com> (raw)
In-Reply-To: <20091110110601.GG30802@alberich.amd.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
---
arch/x86/kernel/microcode_amd.c | 34 +++++++++++++++-------------------
1 files changed, 15 insertions(+), 19 deletions(-)
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 9f13324..26e33bd 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -78,12 +78,12 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
memset(csig, 0, sizeof(*csig));
if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) {
- printk(KERN_WARNING "microcode: CPU%d: AMD CPU family 0x%x not "
- "supported\n", cpu, c->x86);
+ pr_warning("microcode: CPU%d: AMD CPU family 0x%x not "
+ "supported\n", cpu, c->x86);
return -1;
}
rdmsr(MSR_AMD64_PATCH_LEVEL, csig->rev, dummy);
- printk(KERN_INFO "microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev);
+ pr_info("microcode: CPU%d: patch_level=0x%x\n", cpu, csig->rev);
return 0;
}
@@ -113,7 +113,7 @@ static int get_matching_microcode(int cpu, void *mc, int rev)
/* ucode might be chipset specific -- currently we don't support this */
if (mc_header->nb_dev_id || mc_header->sb_dev_id) {
- printk(KERN_ERR "microcode: CPU%d: loading of chipset "
+ pr_err(KERN_ERR "microcode: CPU%d: loading of chipset "
"specific code not yet supported\n", cpu);
return 0;
}
@@ -143,14 +143,12 @@ static int apply_microcode_amd(int cpu)
/* check current patch id and patch's id for match */
if (rev != mc_amd->hdr.patch_id) {
- printk(KERN_ERR "microcode: CPU%d: update failed "
+ pr_err("microcode: CPU%d: update failed "
"(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id);
return -1;
}
- printk(KERN_INFO "microcode: CPU%d: updated (new patch_level=0x%x)\n",
- cpu, rev);
-
+ pr_info("microcode: CPU%d: updated (new patch_level=0x%x)\n", cpu, rev);
uci->cpu_sig.rev = rev;
return 0;
@@ -173,7 +171,7 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
return NULL;
if (section_hdr[0] != UCODE_UCODE_TYPE) {
- printk(KERN_ERR "microcode: error: invalid type field in "
+ pr_err("microcode: error: invalid type field in "
"container file section header\n");
return NULL;
}
@@ -181,7 +179,7 @@ get_next_ucode(const u8 *buf, unsigned int size, unsigned int *mc_size)
total_size = (unsigned long) (section_hdr[4] + (section_hdr[5] << 8));
if (total_size > size || total_size > UCODE_MAX_SIZE) {
- printk(KERN_ERR "microcode: error: size mismatch\n");
+ pr_err("microcode: error: size mismatch\n");
return NULL;
}
@@ -210,15 +208,14 @@ static int install_equiv_cpu_table(const u8 *buf)
size = buf_pos[2];
if (buf_pos[1] != UCODE_EQUIV_CPU_TABLE_TYPE || !size) {
- printk(KERN_ERR "microcode: error: invalid type field in "
+ pr_err("microcode: error: invalid type field in "
"container file section header\n");
return 0;
}
equiv_cpu_table = (struct equiv_cpu_entry *) vmalloc(size);
if (!equiv_cpu_table) {
- printk(KERN_ERR "microcode: failed to allocate "
- "equivalent CPU table\n");
+ pr_err("microcode: failed to allocate equivalent CPU table\n");
return 0;
}
@@ -251,8 +248,7 @@ generic_load_microcode(int cpu, const u8 *data, size_t size)
offset = install_equiv_cpu_table(ucode_ptr);
if (!offset) {
- printk(KERN_ERR "microcode: failed to create "
- "equivalent cpu table\n");
+ pr_err("microcode: failed to create equivalent cpu table\n");
return UCODE_ERROR;
}
@@ -306,7 +302,7 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device)
return UCODE_NFOUND;
if (*(u32 *)firmware->data != UCODE_MAGIC) {
- printk(KERN_ERR "microcode: invalid UCODE_MAGIC (0x%08x)\n",
+ pr_err("microcode: invalid UCODE_MAGIC (0x%08x)\n",
*(u32 *)firmware->data);
return UCODE_ERROR;
}
@@ -319,8 +315,8 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device)
static enum ucode_state
request_microcode_user(int cpu, const void __user *buf, size_t size)
{
- printk(KERN_INFO "microcode: AMD microcode update via "
- "/dev/cpu/microcode not supported\n");
+ pr_info("microcode: AMD microcode update via "
+ "/dev/cpu/microcode not supported\n");
return UCODE_ERROR;
}
@@ -336,7 +332,7 @@ void init_microcode_amd(struct device *device)
{
const char *fw_name = "amd-ucode/microcode_amd.bin";
if (request_firmware(&firmware, fw_name, device))
- printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
+ pr_err("microcode: failed to load file %s\n", fw_name);
}
void fini_microcode_amd(void)
--
1.6.5.2
next prev parent reply other threads:[~2009-11-10 11:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-10 11:06 [PATCH 0/3] x86, ucode-amd: trim verbosity Andreas Herrmann
2009-11-10 11:07 ` [PATCH 1/3] x86, ucode-amd: Load ucode-patches once and not separately fo each CPU Andreas Herrmann
2009-11-10 12:02 ` Dmitry Adamushko
2009-11-11 7:51 ` Clemens Ladisch
2009-11-11 11:27 ` Andreas Herrmann
2009-11-12 15:05 ` Andreas Herrmann
2009-11-10 13:21 ` [tip:x86/microcode] x86: ucode-amd: Load ucode-patches once and not separately of " tip-bot for Andreas Herrmann
2009-11-10 11:08 ` [PATCH 2/3] x86, ucode-amd: Don't warn when no ucode is available for a CPU revision Andreas Herrmann
2009-11-10 13:22 ` [tip:x86/microcode] x86: " tip-bot for Andreas Herrmann
2009-11-10 11:09 ` Andreas Herrmann [this message]
2009-11-10 13:22 ` [tip:x86/microcode] x86: ucode-amd: Convert printk(KERN_*...) to pr_*(...) tip-bot for Andreas Herrmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091110110920.GJ30802@alberich.amd.com \
--to=herrmann.der.user@googlemail.com \
--cc=dmitry.adamushko@gmail.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox