public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
To: akpm@linux-foundation.org, James.Bottomley@HansenPartnership.com
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
	scameron@beardog.cce.hp.com, mikem@beardog.cce.hp.com
Subject: [PATCH 14/17] hpsa: Flush cache with interrupts still enabled.
Date: Wed, 11 Nov 2009 10:51:34 -0600	[thread overview]
Message-ID: <20091111165134.17754.56407.stgit@beardog.cce.hp.com> (raw)
In-Reply-To: <20091111164803.17754.11900.stgit@beardog.cce.hp.com>

hpsa: Flush cache with interrupts still enabled.  It's not
necessary to disable interrupts prior to flushing the cache
on driver unload.  Also, don't dma from the stack.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
---

 drivers/scsi/hpsa.c |   39 ++++++++++++++++++++++++++++++---------
 1 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index e3b80fa..d171a55 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -3581,24 +3581,45 @@ clean1:
 	return -1;
 }
 
+static void hpsa_flush_cache(struct ctlr_info *h)
+{
+	char *flush_buf;
+	struct CommandList *c;
+	int rc;
+
+	flush_buf = kzalloc(4, GFP_KERNEL);
+	if (!flush_buf)
+		return;
+
+	c = cmd_special_alloc(h);
+	if (!c) {
+		dev_warn(&h->pdev->dev, "cmd_special_alloc returned NULL!\n");
+		goto out_of_memory;
+	}
+	rc = fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
+		RAID_CTLR_LUNID, TYPE_CMD);
+	if (rc == 0) {
+		hpsa_scsi_do_simple_cmd_with_retry(h, c, PCI_DMA_TODEVICE);
+		if (c->err_info->CommandStatus != 0)
+			dev_warn(&h->pdev->dev,
+				"error flushing cache on controller\n");
+	}
+	cmd_special_free(h, c);
+out_of_memory:
+	kfree(flush_buf);
+}
+
 static void hpsa_shutdown(struct pci_dev *pdev)
 {
 	struct ctlr_info *h;
-	char flush_buf[4];
-	int return_code;
 
 	h = pci_get_drvdata(pdev);
 	/* Turn board interrupts off  and send the flush cache command
 	 * sendcmd will turn off interrupt, and send the flush...
 	 * To write all data in the battery backed cache to disks
 	 */
-	memset(flush_buf, 0, 4);
-	return_code = sendcmd(HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
-				RAID_CTLR_LUNID, TYPE_CMD);
-	if (return_code != IO_OK) {
-		dev_warn(&pdev->dev, "error flushing cache on controller %d\n",
-		       h->ctlr);
-	}
+	hpsa_flush_cache(h);
+	h->access.set_intr_mask(h, HPSA_INTR_OFF);
 	free_irq(h->intr[2], h);
 #ifdef CONFIG_PCI_MSI
 	if (h->msix_vector)


  parent reply	other threads:[~2009-11-11 16:50 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-11 16:50 [PATCH 00/17] hpsa driver updates Stephen M. Cameron
2009-11-11 16:50 ` [PATCH 01/17] Add hpsa driver for HP Smart Array controllers Stephen M. Cameron
2009-11-11 16:50 ` [PATCH 02/17] avoid helpful cleanup patches Stephen M. Cameron
2009-11-11 16:50 ` [PATCH 03/17] hpsa: Fix vendor id check Stephen M. Cameron
2009-11-11 16:50 ` [PATCH 04/17] Fix use of unallocated memory for MSA2xxx enclosure device data Stephen M. Cameron
2009-11-12 22:45   ` Andrew Morton
2009-11-11 16:50 ` [PATCH 05/17] hpsa: Allocate the correct amount of extra space for the scsi host Stephen M. Cameron
2009-11-11 16:50 ` [PATCH 06/17] hpsa: Use shost_priv instead of accessing host->hostdata[0] directly Stephen M. Cameron
2009-11-11 16:50 ` [PATCH 07/17] hpsa: Factor out command submission sequence Stephen M. Cameron
2009-11-11 16:51 ` [PATCH 08/17] hpsa: Factor out some pci_unmap code Stephen M. Cameron
2009-11-11 16:51 ` [PATCH 09/17] Add thread to allow controllers to register for rescan for new devices Stephen M. Cameron
2009-11-12 22:50   ` Andrew Morton
2009-11-11 16:51 ` [PATCH 10/17] hpsa: Allow device rescan to be triggered via sysfs Stephen M. Cameron
2009-11-12 22:51   ` Andrew Morton
2009-11-11 16:51 ` [PATCH 11/17] hpsa: Make hpsa_sdev_attrs static Stephen M. Cameron
2009-11-11 16:51 ` [PATCH 12/17] hpsa: decode unit attention condition and retry commands Stephen M. Cameron
2009-11-11 16:51 ` [PATCH 13/17] hpsa: Retry driver initiated commands on unit attention Stephen M. Cameron
2009-11-12 22:52   ` Andrew Morton
2009-11-11 16:51 ` Stephen M. Cameron [this message]
2009-11-11 16:51 ` [PATCH 15/17] hpsa: Remove sendcmd, in no case are we required to poll for completions Stephen M. Cameron
2009-11-11 16:51 ` [PATCH 16/17] hpsa: Make fill_cmd() return void Stephen M. Cameron
2009-11-11 16:51 ` [PATCH 17/17] hpsa: fix typo that causes scsi status to be lost Stephen M. Cameron
2009-11-16 21:06 ` [PATCH 00/17] hpsa driver updates James Bottomley
2009-11-16 21:32   ` Andrew Morton
2009-11-16 21:54   ` scameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091111165134.17754.56407.stgit@beardog.cce.hp.com \
    --to=scameron@beardog.cce.hp.com \
    --cc=James.Bottomley@HansenPartnership.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=mikem@beardog.cce.hp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox