From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751103AbZKPVVJ (ORCPT ); Mon, 16 Nov 2009 16:21:09 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750905AbZKPVVI (ORCPT ); Mon, 16 Nov 2009 16:21:08 -0500 Received: from g1t0029.austin.hp.com ([15.216.28.36]:11122 "EHLO g1t0029.austin.hp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750814AbZKPVVH (ORCPT ); Mon, 16 Nov 2009 16:21:07 -0500 Date: Mon, 16 Nov 2009 14:21:13 -0700 From: Alex Chiang To: Jesse Barnes Cc: linux-pci , linux-kernel Subject: [PATCH] x86/pci: remove early PCI pr_debug statements Message-ID: <20091116212113.GF21242@ldl.fc.hp.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.5.18 (2008-05-17) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org commit db635adc turned -DDEBUG for x86/pci on when CONFIG_PCI_DEBUG is set. In general, I agree with that change. However, it exposes a bunch of very low level PCI debugging in the early x86 path, such as: 0 reading 2 from a: ffff 1 reading 2 from a: ffff 2 reading 2 from a: ffff 3 reading 2 from a: 300 3 reading 2 from 0: 1002 3 reading 2 from 2: 515e These statements add a lot of noise to the boot and aren't likely to be necessary even when handling random upstream bug reports. [In contrast, statements such as these: pci 0000:02:04.0: found [14e4:164a] class 000200 header type 00 pci 0000:02:04.0: reg 10: [mem 0xf8000000-0xf9ffffff 64bit] pci 0000:02:04.0: reg 30: [mem 0x00000000-0x0001ffff pref] are indeed useful when remote debugging users' machines] Remove the noisy printks and save electrons everywhere. Cc: Bjorn Helgaas Cc: Yinghai Lu Cc: Andi Kleen Cc: Ingo Molnar Signed-off-by: Alex Chiang --- diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c index aaf26ae..d1067d5 100644 --- a/arch/x86/pci/early.c +++ b/arch/x86/pci/early.c @@ -12,8 +12,6 @@ u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset) u32 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inl(0xcfc); - if (v != 0xffffffff) - pr_debug("%x reading 4 from %x: %x\n", slot, offset, v); return v; } @@ -22,7 +20,6 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset) u8 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inb(0xcfc + (offset&3)); - pr_debug("%x reading 1 from %x: %x\n", slot, offset, v); return v; } @@ -31,28 +28,24 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset) u16 v; outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); v = inw(0xcfc + (offset&2)); - pr_debug("%x reading 2 from %x: %x\n", slot, offset, v); return v; } void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset, u32 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outl(val, 0xcfc); } void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outb(val, 0xcfc + (offset&3)); } void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val) { - pr_debug("%x writing to %x: %x\n", slot, offset, val); outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8); outw(val, 0xcfc + (offset&2)); }