public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Alan Cox <alan@linux.intel.com>
To: greg@kroah.com, linux-kernel@vger.kernel.org
Subject: [PATCH 07/12] moxa: rework the locking a bit
Date: Wed, 18 Nov 2009 14:15:56 +0000	[thread overview]
Message-ID: <20091118141551.3346.76915.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091118141354.3346.16910.stgit@localhost.localdomain>

Introduce a lock for moxafunc() to protect the cases where were get collisions
between two function requests at the same time.

Signed-off-by: Alan Cox <alan@linux.intel.com>
---

 drivers/char/moxa.c |   27 ++++++++++++++++++++++-----
 1 files changed, 22 insertions(+), 5 deletions(-)


diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c
index 96b2985..ba84c4d 100644
--- a/drivers/char/moxa.c
+++ b/drivers/char/moxa.c
@@ -248,9 +248,25 @@ static void moxa_wait_finish(void __iomem *ofsAddr)
 
 static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg)
 {
+        unsigned long flags;
+        spin_lock_irqsave(&moxafunc_lock, flags);
 	writew(arg, ofsAddr + FuncArg);
 	writew(cmd, ofsAddr + FuncCode);
 	moxa_wait_finish(ofsAddr);
+	spin_unlock_irqrestore(&moxafunc_lock, flags);
+}
+
+static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg)
+{
+        unsigned long flags;
+        u16 ret;
+        spin_lock_irqsave(&moxafunc_lock, flags);
+	writew(arg, ofsAddr + FuncArg);
+	writew(cmd, ofsAddr + FuncCode);
+	moxa_wait_finish(ofsAddr);
+	ret = readw(ofsAddr + FuncArg);
+	spin_unlock_irqrestore(&moxafunc_lock, flags);
+	return ret;
 }
 
 static void moxa_low_water_check(void __iomem *ofsAddr)
@@ -417,6 +433,7 @@ static const struct tty_port_operations moxa_port_ops = {
 static struct tty_driver *moxaDriver;
 static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0);
 static DEFINE_SPINLOCK(moxa_lock);
+static DEFINE_SPINLOCK(moxafunc_lock);
 
 /*
  * HW init
@@ -1823,10 +1840,12 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio,
 	baud = MoxaPortSetBaud(port, baud);
 
 	if (termio->c_iflag & (IXON | IXOFF | IXANY)) {
+	        spin_lock_irq(&moxafunc_lock);
 		writeb(termio->c_cc[VSTART], ofsAddr + FuncArg);
 		writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1);
 		writeb(FC_SetXonXoff, ofsAddr + FuncCode);
 		moxa_wait_finish(ofsAddr);
+		spin_unlock_irqrestore(&moxafunc_lock);
 
 	}
 	return baud;
@@ -1879,12 +1898,10 @@ static int MoxaPortLineStatus(struct moxa_port *port)
 	int val;
 
 	ofsAddr = port->tableAddr;
-	if (MOXA_IS_320(port->board)) {
-		moxafunc(ofsAddr, FC_LineStatus, 0);
-		val = readw(ofsAddr + FuncArg);
-	} else {
+	if (MOXA_IS_320(port->board))
+		val = moxafuncret(ofsAddr, FC_LineStatus, 0);
+	else
 		val = readw(ofsAddr + FlagStat) >> 4;
-	}
 	val &= 0x0B;
 	if (val & 8)
 		val |= 4;


  parent reply	other threads:[~2009-11-18 14:32 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-18 14:14 [PATCH 00/12] Series short description Alan Cox
2009-11-18 14:14 ` [PATCH 01/12] isicom: switch to the new tty_port_open helper Alan Cox
2009-11-18 14:14 ` [PATCH 02/12] isicom: sort out the board init logic Alan Cox
2009-11-18 14:15 ` [PATCH 03/12] mxser: use the tty_port_open method Alan Cox
2009-11-18 14:15 ` [PATCH 04/12] mxser: Use the new locking rules to fix setserial properly Alan Cox
2009-11-20 12:08   ` Dan Carpenter
2009-11-18 14:15 ` [PATCH 05/12] isicom: fix deadlock on shutdown Alan Cox
2009-11-18 14:15 ` [PATCH 06/12] moxa: Use more tty_port ops Alan Cox
2009-11-18 14:15 ` Alan Cox [this message]
2009-11-18 14:16 ` [PATCH 08/12] Locking clean up Alan Cox
2009-11-18 14:16 ` [PATCH 09/12] moxa: Kill off the throttle method Alan Cox
2009-11-18 14:16 ` [PATCH 10/12] moxa: Fix modem op locking Alan Cox
2009-11-18 14:16 ` [PATCH 11/12] moxa: Kill the use of lock_kernel Alan Cox
2009-11-18 14:17 ` [PATCH 12/12] moxa: split open lock Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091118141551.3346.76915.stgit@localhost.localdomain \
    --to=alan@linux.intel.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox