From: "Michael S. Tsirkin" <mst@redhat.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>,
Paul Mackerras <paulus@samba.org>,
Frederic Weisbecker <fweisbec@gmail.com>,
Arnaldo Carvalho de Melo <acme@redhat.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] perf tools: support static build
Date: Sun, 22 Nov 2009 13:27:27 +0200 [thread overview]
Message-ID: <20091122112726.GC13644@redhat.com> (raw)
In-Reply-To: <20091117092331.GA23585@elte.hu>
On Tue, Nov 17, 2009 at 10:23:31AM +0100, Ingo Molnar wrote:
>
> * Ingo Molnar <mingo@elte.hu> wrote:
>
> > * Michael S. Tsirkin <mst@redhat.com> wrote:
> >
> > > This makes it possible to build perf statically, by performing make
> > > LDFLAGS=-static
> > >
> > > Since static libraries are only searched in the order they are
> > > specified, move library list from LDFLAGS to EXTLIBS, so that they are
> > > put at the end of linker command line.
> > >
> > > Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
> > > ---
> > >
> > > Changes in v2: updated to latest tip.
> >
> > The Makefile changed again so your v2 patch is conflicting too - mind
> > updating it to latest -tip?
>
> i've applied your patch to latest -tip and resolved the conflicts
> manually. Normal build works, but static one does not yet:
>
> aldebaran:~/linux/linux/tools/perf> make -j LDFLAGS=-static
> Makefile:484: *** No libelf.h/libelf found, please install
> libelf-dev/elfutils-libelf-devel and glibc-dev[el]. Stop.
>
> mind double checking my changes in
>
> http://people.redhat.com/mingo/tip.git/README
>
> Thanks,
>
> Ingo
Looking at it.
For now, here's a patch that shows what went
wrong with configure.
--->
From: Michael S. Tsirkin <mst@redhat.com>
Subject: perf: add V=2 option to help debug config issues
Make standard error show up on console
when V=2 is set.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
--
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 4ec86da..d0bdaf2 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -2,6 +2,7 @@
all::
# Define V=1 to have a more verbose compile.
+# Define V=2 to have an even more verbose compile.
#
# Define SNPRINTF_RETURNS_BOGUS if your are on a system which snprintf()
# or vsnprintf() return -1 instead of number of characters which would
@@ -263,7 +264,7 @@ PTHREAD_LIBS = -lpthread
# explicitly what architecture to check for. Fix this up for yours..
SPARSE_FLAGS = -D__BIG_ENDIAN__ -D__powerpc__
-ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null >/dev/null 2>&1 && echo y"), y)
+ifeq ($(shell sh -c "echo 'int foo(void) {char X[2]; return 3;}' | $(CC) -x c -c -Werror -fstack-protector-all - -o /dev/null "$(QUIET_STDERR)" && echo y"), y)
CFLAGS := $(CFLAGS) -fstack-protector-all
endif
@@ -449,6 +450,11 @@ BUILTIN_OBJS += builtin-kmem.o
PERFLIBS = $(LIB_FILE)
+ifeq ($(V), 2)
+ QUIET_STDERR = ">/dev/null"
+else
+ QUIET_STDERR = ">/dev/null 2>&1"
+endif
#
# Platform specific tweaks
#
@@ -476,19 +482,19 @@ ifeq ($(uname_S),Darwin)
PTHREAD_LIBS =
endif
-ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
-ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <gnu/libc-version.h>'; echo 'int main(void) { const char * version = gnu_get_libc_version(); return (long)version; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
endif
- ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
+ ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
BASIC_CFLAGS += -DLIBELF_NO_MMAP
endif
else
msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
endif
-ifneq ($(shell sh -c "(echo '\#include <libdwarf/dwarf.h>'; echo '\#include <libdwarf/libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) > /dev/null 2>&1 && echo y"), y)
+ifneq ($(shell sh -c "(echo '\#include <libdwarf/dwarf.h>'; echo '\#include <libdwarf/libdwarf.h>'; echo 'int main(void) { Dwarf_Debug dbg; Dwarf_Error err; Dwarf_Ranges *rng; dwarf_init(0, DW_DLC_READ, 0, 0, &dbg, &err); dwarf_get_ranges(dbg, 0, &rng, 0, 0, &err); return (long)dbg; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -ldwarf -lelf -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) "$(QUIET_STDERR)" && echo y"), y)
msg := $(warning No libdwarf.h found or old libdwarf.h found, disables dwarf support. Please install libdwarf-dev/libdwarf-devel >= 20081231);
BASIC_CFLAGS += -DNO_LIBDWARF
else
@@ -500,20 +506,20 @@ endif
ifdef NO_DEMANGLE
BASIC_CFLAGS += -DNO_DEMANGLE
else
- has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd > /dev/null 2>&1 && echo y")
+ has_bfd := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd),y)
EXTLIBS += -lbfd
else
- has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty > /dev/null 2>&1 && echo y")
+ has_bfd_iberty := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty),y)
EXTLIBS += -lbfd -liberty
else
- has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz > /dev/null 2>&1 && echo y")
+ has_bfd_iberty_z := $(shell sh -c "(echo '\#include <bfd.h>'; echo 'int main(void) { bfd_demangle(0, 0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -lbfd -liberty -lz "$(QUIET_STDERR)" && echo y")
ifeq ($(has_bfd_iberty_z),y)
EXTLIBS += -lbfd -liberty -lz
else
- has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty > /dev/null 2>&1 && echo y")
+ has_cplus_demangle := $(shell sh -c "(echo 'extern char *cplus_demangle(const char *, int);'; echo 'int main(void) { cplus_demangle(0, 0); return 0; }') | $(CC) -x c - $(ALL_CFLAGS) -o /dev/null $(ALL_LDFLAGS) $(EXTLIBS) -liberty "$(QUIET_STDERR)" && echo y")
ifeq ($(has_cplus_demangle),y)
EXTLIBS += -liberty
BASIC_CFLAGS += -DHAVE_CPLUS_DEMANGLE
next prev parent reply other threads:[~2009-11-22 11:32 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-29 15:20 [PATCH] perf tools: support static build Michael S. Tsirkin
2009-11-04 11:06 ` Ingo Molnar
2009-11-17 9:23 ` Ingo Molnar
2009-11-22 11:27 ` Michael S. Tsirkin [this message]
2009-11-22 11:39 ` Michael S. Tsirkin
2009-11-22 12:02 ` Ingo Molnar
2009-11-22 12:11 ` Michael S. Tsirkin
2009-11-22 13:02 ` Ingo Molnar
2009-11-22 22:40 ` Paul Mackerras
2009-11-23 8:45 ` Ingo Molnar
2009-11-22 12:06 ` [tip:perf/core] perf tools: Add V=2 option to help debug config issues tip-bot for Michael S. Tsirkin
2009-11-17 9:24 ` [tip:perf/core] perf tools: Support static build tip-bot for Michael S. Tsirkin
-- strict thread matches above, loose matches on Subject: below --
2009-10-28 7:04 [PATCH] perf tools: support " Michael S. Tsirkin
2009-10-29 8:06 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091122112726.GC13644@redhat.com \
--to=mst@redhat.com \
--cc=a.p.zijlstra@chello.nl \
--cc=acme@redhat.com \
--cc=fweisbec@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=paulus@samba.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox