From: Pavel Machek <pavel@ucw.cz>
To: linux-bluetooth@vger.kernel.org,
Marcel Holtmann <marcel@holtmann.org>,
kernel list <linux-kernel@vger.kernel.org>
Subject: bluetooth cf slow (10KB/sec), lots of dmesg spam
Date: Sun, 29 Nov 2009 16:58:01 +0100 [thread overview]
Message-ID: <20091129155801.GA1634@ucw.cz> (raw)
Hi!
I'm using CF bluetooth card:
toy:~# setserial -av /dev/ttyS0
/dev/ttyS0, Line 0, UART: 16950/954, Port: 0xc48202f8, IRQ: 201
Baud_base: 921600, close_delay: 50, divisor: 0
closing_wait: 3000
Flags: spd_normal skip_test
toy:~# hciconfig
hci0: Type: UART
BD Address: 00:10:60:AB:25:9A ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1612262 acl:5084 sco:0 events:3602 errors:0
TX bytes:507156 acl:3779 sco:0 commands:28 errors:0
...and it mostly works, but slowly, and with tons of complains. Card
is:
toy:~# lspcmcia -v
Socket 0 Bridge: [pxa2xx-pcmcia] (bus ID: pxa2xx-pcmcia)
Configuration: state: on ready: yes
Voltage: 3.3V Vcc: 3.3V Vpp: 0.0V
Socket 0 Device 0: [serial_cs] (bus ID: 0.0)
Configuration: state: on
Product Name: Compact Flash Bluetooth Card
Identification: manf_id: 0x0279 card_id: 0x950b
function: 2 (serial)
prod_id(1): "Compact Flash" (0x95521410)
prod_id(2): "Bluetooth Card" (0x7664fb1d)
prod_id(3): --- (---)
prod_id(4): --- (---)
I believe the problem is 115200 bitrate between system and CF serial;
I did setserial baud_base 921600, but that does not seem to speed it
up. Do I need to do some special magic to enable high speed?
Any ideas?
Pavel
PM: Adding info for No Bus:hci0
bcsp_recv: Out-of-order packet arrived, got 1 expected 0
PM: Adding info for No Bus:rfcomm1
PM: Adding info for No Bus:hci0:41
PM: Adding info for No Bus:bnep0
bcsp_recv: Short BCSP packet
bcsp_recv: Out-of-order packet arrived, got 5 expected 4
bcsp_recv: Out-of-order packet arrived, got 6 expected 4
SysRq : Changing Loglevel
Loglevel set to 1
bcsp_recv: Short BCSP packet
bcsp_recv: Out-of-order packet arrived, got 1 expected 0
bcsp_recv: Out-of-order packet arrived, got 2 expected 0
bcsp_recv: Out-of-order packet arrived, got 3 expected 0
bcsp_recv: Short BCSP packet
...
bcsp_recv: Out-of-order packet arrived, got 2 expected 7
bcsp_recv: Short BCSP packet
bcsp_recv: Out-of-order packet arrived, got 7 expected 6
bcsp_recv: Out-of-order packet arrived, got 0 expected 6
bcsp_recv: Out-of-order packet arrived, got 1 expected 6
bcsp_recv: Short BCSP packet
bcsp_recv: Error in BCSP hdr checksum
bcsp_recv: Out-of-order packet arrived, got 4 expected 2
bcsp_recv: Out-of-order packet arrived, got 5 expected 2
bcsp_recv: Short BCSP packet
bcsp_recv: Out-of-order packet arrived, got 2 expected 1
bcsp_recv: Out-of-order packet arrived, got 3 expected 1
bcsp_recv: Out-of-order packet arrived, got 4 expected 1
bcsp_unslip_one_byte: Invalid byte 00 after esc byte
bcsp_recv: Out-of-order packet arrived, got 4 expected 3
bcsp_recv: Out-of-order packet arrived, got 5 expected 3
bcsp_recv: Out-of-order packet arrived, got 6 expected 3
bcsp_recv: Short BCSP packet
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
next reply other threads:[~2009-11-30 13:56 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-29 15:58 Pavel Machek [this message]
2009-11-30 15:39 ` bluetooth cf slow (10KB/sec), lots of dmesg spam Alan Cox
2009-11-29 16:44 ` Pavel Machek
2009-11-30 23:57 ` Alan Cox
2009-12-01 12:37 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091129155801.GA1634@ucw.cz \
--to=pavel@ucw.cz \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox