From: "Bruno Prémont" <bonbons@linux-vserver.org>
To: netdev@vger.kernel.org, Michael Chan <mchan@broadcom.com>
Cc: linux-kernel@vger.kernel.org
Subject: BNX2: Kernel crashes with 2.6.31 and 2.6.31.9
Date: Tue, 29 Dec 2009 08:49:29 +0100 [thread overview]
Message-ID: <20091229084929.54912c0c@pluto.restena.lu> (raw)
On a system that was running 2.6.31 since last September I got two
crashes this December at night (cause unknown), yesterday after second
crash I updated kernel to 2.6.31.9 and enabled netconsole in the hope
to get some information about the cause of the crash.
Today system crashed once again and all I got is the following
incomplete trace on the receiving side of netconsole:
[24701.841185] BUG: unable to handle kernel NULL pointer dereference at (null)
[24701.841188] IP: [<ffffffffa00610fc>] bnx2_poll_work+0x2c/0x12d0 [bnx2]
[24701.841197] PGD 16509067 PUD 4e776067 PMD 0
[24701.841199] Oops: 0000 [#1] SMP
[24701.841202] last sysfs file: /sys/kernel/uevent_seqnum
[24701.841204] CPU 0
[24701.841205] Modules linked in: ipmi_devintf squashfs ext2
zlib_inflate netconsole configfs loop dm_round_robin scsi_dh_rdac
dm_multipath scsi_dh dm_mod sg sr_mod cdrom ata_piix i pmi_si
ipmi_msghandler qla2xxx ahci bnx2 hpwdt uhci_hcd ehci_hcd libata
[24701.841218] Pid: 11273, comm: php-cgi Not tainted 2.6.31.9-x86_64 #1 ProLiant DL360 G5
[24701.841220] RIP: 0010:[<ffffffffa00610fc>] [<ffffffffa00610fc>] bnx2_poll_work+0x2c/0x12d0 [bnx2]
Running objdump on the bnx2.ko module I get the following:
000000000000a0d0 <bnx2_poll_work>:
a0d0: 41 57 push %r15
a0d2: 41 56 push %r14
a0d4: 41 55 push %r13
a0d6: 41 54 push %r12
a0d8: 55 push %rbp
a0d9: 53 push %rbx
a0da: 48 81 ec 28 01 00 00 sub $0x128,%rsp
a0e1: 48 89 7c 24 18 mov %rdi,0x18(%rsp)
a0e6: 48 89 74 24 10 mov %rsi,0x10(%rsp)
a0eb: 89 54 24 0c mov %edx,0xc(%rsp)
a0ef: 89 4c 24 08 mov %ecx,0x8(%rsp)
a0f3: 48 8b 54 24 10 mov 0x10(%rsp),%rdx
a0f8: 48 8b 42 70 mov 0x70(%rdx),%rax
a0fc: 0f b7 10 movzwl (%rax),%edx
a0ff: 31 c0 xor %eax,%eax
a101: 48 8b 4c 24 10 mov 0x10(%rsp),%rcx
a106: 80 fa ff cmp $0xff,%dl
a109: 0f 94 c0 sete %al
a10c: 01 c2 add %eax,%edx
a10e: 66 39 91 1a 02 00 00 cmp %dx,0x21a(%rcx)
a115: 0f 84 78 01 00 00 je a293 <bnx2_poll_work+0x1c3>
a11b: 48 8b 57 08 mov 0x8(%rdi),%rdx
a11f: 48 89 f8 mov %rdi,%rax
a122: 48 8b 9a 00 03 00 00 mov 0x300(%rdx),%rbx
a129: 48 83 c0 40 add $0x40,%rax
a12d: 48 29 c1 sub %rax,%rcx
a130: 48 89 c8 mov %rcx,%rax
a133: 48 c1 f8 06 sar $0x6,%rax
a137: 69 c0 39 8e e3 38 imul $0x38e38e39,%eax,%eax
a13d: 48 c1 e0 07 shl $0x7,%rax
a141: 48 01 d8 add %rbx,%rax
a144: 48 89 44 24 20 mov %rax,0x20(%rsp)
a149: 48 8b 7c 24 10 mov 0x10(%rsp),%rdi
a14e: 48 8b 47 70 mov 0x70(%rdi),%rax
a152: 44 0f b7 30 movzwl (%rax),%r14d
a156: 31 c0 xor %eax,%eax
a158: 0f b7 9f 18 02 00 00 movzwl 0x218(%rdi),%ebx
a15f: 41 80 fe ff cmp $0xff,%r14b
a163: 0f 94 c0 sete %al
a166: 45 31 ff xor %r15d,%r15d
a169: 41 01 c6 add %eax,%r14d
a16c: 66 44 39 f3 cmp %r14w,%bx
a170: 0f 84 ee 00 00 00 je a264 <bnx2_poll_work+0x194>
a176: 66 2e 0f 1f 84 00 00 nopw %cs:0x0(%rax,%rax,1)
a17d: 00 00 00
a180: 0f b6 cb movzbl %bl,%ecx
a183: 48 8b 44 24 10 mov 0x10(%rsp),%rax
a188: 44 0f b7 e1 movzwl %cx,%r12d
a18c: 49 c1 e4 04 shl $0x4,%r12
a190: 4c 03 a0 10 02 00 00 add 0x210(%rax),%r12
a197: 4d 8b 2c 24 mov (%r12),%r13
a19b: 66 41 83 7c 24 08 00 cmpw $0x0,0x8(%r12)
a1a2: 41 0f 18 8d bc 00 00 prefetcht0 0xbc(%r13)
a1a9: 00
...
Kernel is compiled on Gentoo (64bit):
Linux version 2.6.31.9-x86_64 () (gcc version 4.3.4 (Gentoo 4.3.4 p1.0, pie-10.1.5) ) #1 SMP Mon Dec 28 15:49:16 CET 2009
The affected server (HP DL360 G5) is running OpenSuSE-11.1,
32bit userspace
Any idea if there is a recent patch that could fix this issue? At the
crashing time the server was not specifically loaded and had around
200 packets/s network traffic.
Regards,
Bruno
next reply other threads:[~2009-12-29 8:00 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-29 7:49 Bruno Prémont [this message]
2009-12-29 9:05 ` BNX2: Kernel crashes with 2.6.31 and 2.6.31.9 Benjamin Li
2009-12-29 9:33 ` Bruno Prémont
2009-12-29 13:54 ` Bruno Prémont
2009-12-30 5:08 ` Benjamin Li
2010-02-19 8:10 ` Bruno Prémont
2010-02-19 19:57 ` Benjamin Li
2010-02-19 21:03 ` Brian Haley
2010-02-19 21:47 ` Benjamin Li
2010-02-23 12:15 ` Bruno Prémont
2010-03-02 1:26 ` Benjamin Li
2010-03-02 7:10 ` Bruno Prémont
2010-03-02 8:20 ` Bruno Prémont
2010-03-02 22:12 ` Michael Chan
2010-03-04 20:31 ` Brian Haley
2010-03-10 23:09 ` Brian Haley
2010-03-10 23:32 ` Michael Chan
2010-03-11 2:09 ` Brian Haley
2010-03-11 17:49 ` Michael Chan
2010-03-11 18:05 ` David Miller
2010-03-11 18:38 ` Michael Chan
2010-03-11 19:40 ` Brian Haley
2010-03-11 19:47 ` Michael Chan
2010-03-11 21:57 ` Brian Haley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091229084929.54912c0c@pluto.restena.lu \
--to=bonbons@linux-vserver.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mchan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox