kernel "OOPS: SMP" on remount EXT4, kernel 2.6.31.8-0.1-vanilla from openSUSE 11.2

Michael Monnerie
2010-01-22T07:28:56Z

[-- Attachment #1.1: Type: text/plain, Size: 1301 bytes --]

(as I got no feedback from my first post on Jan 19, here a re-post)

I just had a kernel oops (but system didn't crash). I created an ext4
with

mkfs.ext4 -L saturnwork -O extent,uninit_bg -E lazy_itable_init
/dev/sdc3

and then mounted it with

mount /dev/sdc3 /1/disks/work/ -o
barrier,delalloc,auto_da_alloc,noatime,acl,user_xattr

then a remount:

mount -o remount,relatime /1/disks/work/

The disk is SATA and was hot-plugged before, and contained an old linux
reiserfs. I attach the full dmesg log for review. You can contact me
personally, I'm not on this list.

The kernel is from openSUSE 11.2, but vanilla, as with the "desktop"
kernel from openSUSE 11.2 my system crashed a lot (hardware seems OK,
running memtest for 14 hours showed no problems. Also no problems since
I use the vanilla kernel, except this ext4 problem now).

Problem seems SMP related, hardware is a quad-core AMD Phenom.

After that oops, I couldn't unmount the device anymore, had to reboot
the machine.

--
mit freundlichen Grüssen,
Michael Monnerie, Ing. BSc

it-management Internet Services
http://it-management.at
Tel: 0660 / 415 65 31

// Wir haben zwei Häuser zu verkaufen:
// http://zmi.at/langegg/
// http://willhaben.at/iad/realestate/object?adId=15923011

[-- Attachment #1.2: dmesg.txt --]
[-- Type: text/plain, Size: 64435 bytes --]

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.8-0.1-vanilla (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2009-12-15 23:55:40 +0100
[ 0.000000] Command line: root=/dev/sda2 resume=/dev/disk/by-id/ata-WDC_WD1500HLFS-01G6U0_WD-WXJ608AR0429-part1 splash=silent quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009ec00 (usable)
[ 0.000000] modified: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000cff90000 (usable)
[ 0.000000] modified: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[ 0.000000] modified: 00000000cffa8000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] modified: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] modified: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff90000 page 4k
[ 0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 12000-14000
[ 0.000000] RAMDISK: 379ee000 - 37fef916
[ 0.000000] ACPI: RSDP 00000000000fb4f0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff90100 00054 (v01 091009 XSDT1614 20090910 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff90290 000F4 (v03 091009 FACP1614 20090910 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 20090521 tbfadt-558
[ 0.000000] ACPI: DSDT 00000000cff90450 0D60E (v01 A1392 A1392001 00000001 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cffa8000 00040
[ 0.000000] ACPI: APIC 00000000cff90390 0007C (v01 091009 APIC1614 20090910 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 091009 OEMMCFG 20090910 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cffa8040 00072 (v01 091009 OEMB1614 20090910 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff9f450 00038 (v01 091009 OEMHPET 20090910 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff9f490 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000013000 - 000000000002afff]
[ 0.000000] bootmap [000000000002b000 - 0000000000070fff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a76730] TEXT DATA BSS ==> [0001000000 - 0001a76730]
[ 0.000000] #3 [00379ee000 - 0037fef916] RAMDISK ==> [00379ee000 - 0037fef916]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [0001a77000 - 0001a77340] BRK ==> [0001a77000 - 0001a77340]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cff90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2096926
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3823 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833480 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[ 0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000
[ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages at ffff880028034000, static data 82912 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065463
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda2 resume=/dev/disk/by-id/ata-WDC_WD1500HLFS-01G6U0_WD-WXJ608AR0429-part1 splash=silent quiet
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 8187504k/9175040k available (5221k kernel code, 787336k absent, 200200k reserved, 2616k data, 1620k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:456
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2812.538 MHz processor.
[ 0.000956] Console: colour VGA+ 80x25
[ 0.000958] console [tty0] enabled
[ 0.004000] allocated 83886080 bytes of page_cgroup
[ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.004000] hpet clockevent registered
[ 0.004000] alloc irq_desc for 24 on node 0
[ 0.004000] alloc kstat_irqs on node 0
[ 0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.06 BogoMIPS (lpj=11250136)
[ 0.004065] Security Framework initialized
[ 0.004073] SELinux: Disabled at boot.
[ 0.004599] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006744] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007657] Mount-cache hash table entries: 256
[ 0.007764] Initializing cgroup subsys ns
[ 0.007767] Initializing cgroup subsys cpuacct
[ 0.007770] Initializing cgroup subsys memory
[ 0.007780] Initializing cgroup subsys devices
[ 0.007782] Initializing cgroup subsys freezer
[ 0.007783] Initializing cgroup subsys net_cls
[ 0.007803] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.007805] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.007807] CPU 0/0x0 -> Node 0
[ 0.007809] tseg: 0000000000
[ 0.007819] CPU: Physical Processor ID: 0
[ 0.007820] CPU: Processor Core ID: 0
[ 0.007822] mce: CPU supports 6 MCE banks
[ 0.007829] using C1E aware idle routine
[ 0.007831] Performance Counters: AMD PMU driver.
[ 0.007834] ... version: 0
[ 0.007835] ... bit width: 48
[ 0.007836] ... generic counters: 4
[ 0.007838] ... value mask: 0000ffffffffffff
[ 0.007839] ... max period: 00007fffffffffff
[ 0.007840] ... fixed-purpose counters: 0
[ 0.007842] ... counter mask: 000000000000000f
[ 0.008960] ACPI: Core revision 20090521
[ 0.028051] Setting APIC routing to flat
[ 0.028346] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070984] CPU0: AMD Phenom(tm) II X4 925 Processor stepping 02
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5625.13 BogoMIPS (lpj=11250275)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.156913] CPU1: AMD Phenom(tm) II X4 925 Processor stepping 02
[ 0.156920] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160078] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 5625.13 BogoMIPS (lpj=11250278)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 2/0x2 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.248960] CPU2: AMD Phenom(tm) II X4 925 Processor stepping 02
[ 0.248967] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.252074] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 5625.12 BogoMIPS (lpj=11250249)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 3/0x3 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.340909] CPU3: AMD Phenom(tm) II X4 925 Processor stepping 02
[ 0.340915] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.344012] Brought up 4 CPUs
[ 0.344014] Total of 4 processors activated (22500.46 BogoMIPS).
[ 0.344075] CPU0 attaching sched-domain:
[ 0.344078] domain 0: span 0-3 level MC
[ 0.344080] groups: 0 1 2 3
[ 0.344085] CPU1 attaching sched-domain:
[ 0.344087] domain 0: span 0-3 level MC
[ 0.344089] groups: 1 2 3 0
[ 0.344093] CPU2 attaching sched-domain:
[ 0.344094] domain 0: span 0-3 level MC
[ 0.344096] groups: 2 3 0 1
[ 0.344100] CPU3 attaching sched-domain:
[ 0.344101] domain 0: span 0-3 level MC
[ 0.344103] groups: 3 0 1 2
[ 0.344167] Booting paravirtualized kernel on bare hardware
[ 0.344167] regulator: core version 0.5
[ 0.344167] Time: 10:26:23 Date: 01/18/10
[ 0.344167] NET: Registered protocol family 16
[ 0.344199] node 0 link 0: io port [1000, ffffff]
[ 0.344202] TOM: 00000000d0000000 aka 3328M
[ 0.344203] Fam 10h mmconf [e0000000, efffffff]
[ 0.344206] node 0 link 0: mmio [a0000, bffff]
[ 0.344208] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.344210] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.344212] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.344214] TOM2: 0000000230000000 aka 8960M
[ 0.344216] bus: [00,07] on node 0 link 0
[ 0.344218] bus: 00 index 0 io port: [0, ffff]
[ 0.344219] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.344221] bus: 00 index 2 mmio: [d0000000, dfffffff]
[ 0.344223] bus: 00 index 3 mmio: [f0000000, ffffffff]
[ 0.344224] bus: 00 index 4 mmio: [230000000, fcffffffff]
[ 0.344233] ACPI: bus type pci registered
[ 0.344289] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.344291] PCI: Not using MMCONFIG.
[ 0.344292] PCI: Using configuration type 1 for base access
[ 0.344294] PCI: Using configuration type 1 for extended access
[ 0.344775] bio: create slab <bio-0> at 0
[ 0.344948] ACPI: EC: Look up EC in DSDT
[ 0.411745] ACPI: Interpreter enabled
[ 0.411749] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.411776] ACPI: Using IOAPIC for interrupt routing
[ 0.411833] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.418569] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.424782] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.434145] ACPI Warning: Incorrect checksum in table [OEMB] - F2, should be ED 20090521 tbutils-246
[ 0.434277] ACPI: No dock devices found.
[ 0.434456] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.434546] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.434548] pci 0000:00:02.0: PME# disabled
[ 0.434583] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[ 0.434586] pci 0000:00:0a.0: PME# disabled
[ 0.434632] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007]
[ 0.434638] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003]
[ 0.434645] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007]
[ 0.434651] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003]
[ 0.434657] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f]
[ 0.434663] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe8ffc00-0xfe8fffff]
[ 0.434712] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe8fe000-0xfe8fefff]
[ 0.434762] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe8fd000-0xfe8fdfff]
[ 0.434829] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe8ff800-0xfe8ff8ff]
[ 0.434878] pci 0000:00:12.2: supports D1 D2
[ 0.434879] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.434883] pci 0000:00:12.2: PME# disabled
[ 0.434912] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe8fc000-0xfe8fcfff]
[ 0.434963] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe8fb000-0xfe8fbfff]
[ 0.435030] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe8ff400-0xfe8ff4ff]
[ 0.435078] pci 0000:00:13.2: supports D1 D2
[ 0.435079] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.435083] pci 0000:00:13.2: PME# disabled
[ 0.435192] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.435198] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.435204] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.435210] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.435216] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.435276] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe8f4000-0xfe8f7fff]
[ 0.435316] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.435320] pci 0000:00:14.2: PME# disabled
[ 0.435417] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe8fa000-0xfe8fafff]
[ 0.435542] pci 0000:01:00.0: reg 10 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.435550] pci 0000:01:00.0: reg 18 64bit mmio: [0xfe9f0000-0xfe9fffff]
[ 0.435554] pci 0000:01:00.0: reg 20 io port: [0xc000-0xc0ff]
[ 0.435562] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9c0000-0xfe9dffff]
[ 0.435577] pci 0000:01:00.0: supports D1 D2
[ 0.435605] pci 0000:01:00.1: reg 10 64bit mmio: [0xfe9ec000-0xfe9effff]
[ 0.435634] pci 0000:01:00.1: supports D1 D2
[ 0.440071] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff]
[ 0.440074] pci 0000:00:02.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.440078] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.440115] pci 0000:02:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.440129] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
[ 0.440139] pci 0000:02:00.0: reg 20 64bit mmio: [0xfdff8000-0xfdffbfff]
[ 0.440145] pci 0000:02:00.0: reg 30 32bit mmio: [0xfeaf0000-0xfeafffff]
[ 0.440174] pci 0000:02:00.0: supports D1 D2
[ 0.440175] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.440179] pci 0000:02:00.0: PME# disabled
[ 0.448078] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff]
[ 0.448082] pci 0000:00:0a.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.448085] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.448142] pci 0000:03:08.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.448150] pci 0000:03:08.0: reg 14 io port: [0xec00-0xec7f]
[ 0.448206] pci 0000:03:08.0: supports D2
[ 0.448208] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
[ 0.448213] pci 0000:03:08.0: PME# disabled
[ 0.448256] pci 0000:00:14.4: transparent bridge
[ 0.448259] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.448263] pci 0000:00:14.4: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.448282] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.448514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.448594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[ 0.448671] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.453387] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
[ 0.453511] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
[ 0.453632] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.453752] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
[ 0.453872] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.453992] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.454113] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.454233] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.454416] SCSI subsystem initialized
[ 0.454437] libata version 3.00 loaded.
[ 0.454437] usbcore: registered new interface driver usbfs
[ 0.454437] usbcore: registered new interface driver hub
[ 0.454437] usbcore: registered new device driver usb
[ 0.454437] PCI: Using ACPI for IRQ routing
[ 0.464147] PCI-DMA: Disabling AGP.
[ 0.464224] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.464225] PCI-DMA: using GART IOMMU.
[ 0.464228] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.465749] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.465755] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.468028] hpet: hpet2 irq 24 for MSI
[ 0.484022] pnp: PnP ACPI init
[ 0.484041] ACPI: bus type pnp registered
[ 0.489998] pnp: PnP ACPI: found 14 devices
[ 0.490000] ACPI: ACPI bus type pnp unregistered
[ 0.490012] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.490015] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.490020] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.490022] system 00:0a: ioport range 0x40b-0x40b has been reserved
[ 0.490024] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
[ 0.490026] system 00:0a: ioport range 0xc00-0xc01 has been reserved
[ 0.490028] system 00:0a: ioport range 0xc14-0xc14 has been reserved
[ 0.490030] system 00:0a: ioport range 0xc50-0xc51 has been reserved
[ 0.490033] system 00:0a: ioport range 0xc52-0xc52 has been reserved
[ 0.490035] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
[ 0.490037] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
[ 0.490039] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
[ 0.490041] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
[ 0.490043] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
[ 0.490045] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
[ 0.490047] system 00:0a: ioport range 0xcd8-0xcdf has been reserved
[ 0.490050] system 00:0a: ioport range 0xb00-0xb3f has been reserved
[ 0.490052] system 00:0a: ioport range 0x800-0x89f has been reserved
[ 0.490054] system 00:0a: ioport range 0xb00-0xb0f has been reserved
[ 0.490056] system 00:0a: ioport range 0xb20-0xb3f has been reserved
[ 0.490058] system 00:0a: ioport range 0x900-0x90f has been reserved
[ 0.490060] system 00:0a: ioport range 0x910-0x91f has been reserved
[ 0.490063] system 00:0a: ioport range 0xfe00-0xfefe has been reserved
[ 0.490065] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.490068] system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.490070] system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.490075] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.490077] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.490079] system 00:0b: ioport range 0x300-0x30f has been reserved
[ 0.490081] system 00:0b: ioport range 0xa30-0xa3f has been reserved
[ 0.490085] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.490089] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.490092] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.490094] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.490096] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.490098] system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.494820] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.494823] pci 0000:00:02.0: IO window: 0xc000-0xcfff
[ 0.494826] pci 0000:00:02.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.494829] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.494832] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
[ 0.494835] pci 0000:00:0a.0: IO window: 0xd000-0xdfff
[ 0.494837] pci 0000:00:0a.0: MEM window: 0xfea00000-0xfeafffff
[ 0.494840] pci 0000:00:0a.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.494843] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.494846] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.494851] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff
[ 0.494855] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.494864] alloc irq_desc for 18 on node 0
[ 0.494866] alloc kstat_irqs on node 0
[ 0.494870] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.494874] pci 0000:00:02.0: setting latency timer to 64
[ 0.494879] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.494881] pci 0000:00:0a.0: setting latency timer to 64
[ 0.494888] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.494890] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.494893] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.494895] pci_bus 0000:01: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.494897] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.494899] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.494901] pci_bus 0000:02: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.494903] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.494905] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.494906] pci_bus 0000:03: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.494908] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.494910] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.494996] NET: Registered protocol family 2
[ 0.495204] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.496273] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.498200] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.498441] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.498443] TCP reno registered
[ 0.498574] NET: Registered protocol family 1
[ 0.498623] Unpacking initramfs...
[ 0.500901] Switched to high resolution mode on CPU 3
[ 0.500904] Switched to high resolution mode on CPU 1
[ 0.500945] Switched to high resolution mode on CPU 2
[ 0.504018] Switched to high resolution mode on CPU 0
[ 0.593504] Freeing initrd memory: 6150k freed
[ 0.595206] Scanning for low memory corruption every 60 seconds
[ 0.595340] audit: initializing netlink socket (disabled)
[ 0.595350] type=2000 audit(1263810382.592:1): initialized
[ 0.601000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.601147] VFS: Disk quotas dquot_6.5.2
[ 0.601176] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.601309] msgmni has been set to 16003
[ 0.601383] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.601385] io scheduler noop registered
[ 0.601386] io scheduler anticipatory registered
[ 0.601388] io scheduler deadline registered
[ 0.601406] io scheduler cfq registered (default)
[ 0.764041] pci 0000:01:00.0: Boot video device
[ 0.764171] alloc irq_desc for 25 on node 0
[ 0.764173] alloc kstat_irqs on node 0
[ 0.764180] pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
[ 0.764185] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.764271] alloc irq_desc for 26 on node 0
[ 0.764272] alloc kstat_irqs on node 0
[ 0.764277] pcieport-driver 0000:00:0a.0: irq 26 for MSI/MSI-X
[ 0.764280] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.765246] Non-volatile memory driver v1.3
[ 0.765248] Linux agpgart interface v0.103
[ 0.765251] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.765347] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.765617] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.765751] ahci 0000:00:11.0: version 3.0
[ 0.765763] alloc irq_desc for 22 on node 0
[ 0.765764] alloc kstat_irqs on node 0
[ 0.765769] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.765890] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.765893] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 0.766185] scsi0 : ahci
[ 0.766259] scsi1 : ahci
[ 0.766297] scsi2 : ahci
[ 0.766334] scsi3 : ahci
[ 0.766372] scsi4 : ahci
[ 0.766408] scsi5 : ahci
[ 0.766521] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
[ 0.766525] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
[ 0.766528] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
[ 0.766531] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
[ 0.766534] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 22
[ 0.766537] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 22
[ 0.766612] Fixed MDIO Bus: probed
[ 0.766618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.766669] alloc irq_desc for 17 on node 0
[ 0.766670] alloc kstat_irqs on node 0
[ 0.766674] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.766685] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.766704] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.766738] ehci_hcd 0000:00:12.2: debug port 1
[ 0.766752] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
[ 0.776023] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.776047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.776049] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.776051] usb usb1: Product: EHCI Host Controller
[ 0.776053] usb usb1: Manufacturer: Linux 2.6.31.8-0.1-vanilla ehci_hcd
[ 0.776054] usb usb1: SerialNumber: 0000:00:12.2
[ 0.776093] usb usb1: configuration #1 chosen from 1 choice
[ 0.776113] hub 1-0:1.0: USB hub found
[ 0.776119] hub 1-0:1.0: 6 ports detected
[ 0.776208] alloc irq_desc for 19 on node 0
[ 0.776209] alloc kstat_irqs on node 0
[ 0.776215] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.776225] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.776233] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.776262] ehci_hcd 0000:00:13.2: debug port 1
[ 0.776275] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
[ 0.788023] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.788045] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.788046] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.788048] usb usb2: Product: EHCI Host Controller
[ 0.788050] usb usb2: Manufacturer: Linux 2.6.31.8-0.1-vanilla ehci_hcd
[ 0.788051] usb usb2: SerialNumber: 0000:00:13.2
[ 0.788086] usb usb2: configuration #1 chosen from 1 choice
[ 0.788103] hub 2-0:1.0: USB hub found
[ 0.788108] hub 2-0:1.0: 6 ports detected
[ 0.788166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.788206] alloc irq_desc for 16 on node 0
[ 0.788208] alloc kstat_irqs on node 0
[ 0.788212] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.788224] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.788230] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.788251] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
[ 0.848022] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.848025] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.848027] usb usb3: Product: OHCI Host Controller
[ 0.848029] usb usb3: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd
[ 0.848030] usb usb3: SerialNumber: 0000:00:12.0
[ 0.848065] usb usb3: configuration #1 chosen from 1 choice
[ 0.848086] hub 3-0:1.0: USB hub found
[ 0.848095] hub 3-0:1.0: 3 ports detected
[ 0.848171] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.848182] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.848188] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 0.848204] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
[ 0.908020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.908022] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.908024] usb usb4: Product: OHCI Host Controller
[ 0.908026] usb usb4: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd
[ 0.908027] usb usb4: SerialNumber: 0000:00:12.1
[ 0.908064] usb usb4: configuration #1 chosen from 1 choice
[ 0.908083] hub 4-0:1.0: USB hub found
[ 0.908090] hub 4-0:1.0: 3 ports detected
[ 0.908167] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.908179] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.908184] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 0.908206] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
[ 0.968018] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.968021] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.968023] usb usb5: Product: OHCI Host Controller
[ 0.968024] usb usb5: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd
[ 0.968026] usb usb5: SerialNumber: 0000:00:13.0
[ 0.968063] usb usb5: configuration #1 chosen from 1 choice
[ 0.968080] hub 5-0:1.0: USB hub found
[ 0.968088] hub 5-0:1.0: 3 ports detected
[ 0.968167] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.968177] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.968183] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 0.968199] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8fb000
[ 1.028020] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.028022] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.028024] usb usb6: Product: OHCI Host Controller
[ 1.028026] usb usb6: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd
[ 1.028027] usb usb6: SerialNumber: 0000:00:13.1
[ 1.028067] usb usb6: configuration #1 chosen from 1 choice
[ 1.028085] hub 6-0:1.0: USB hub found
[ 1.028092] hub 6-0:1.0: 3 ports detected
[ 1.028170] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.028182] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.028188] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.028203] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8fa000
[ 1.084369] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.084451] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.084475] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.088020] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.088023] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.088024] usb usb7: Product: OHCI Host Controller
[ 1.088026] usb usb7: Manufacturer: Linux 2.6.31.8-0.1-vanilla ohci_hcd
[ 1.088027] usb usb7: SerialNumber: 0000:00:14.5
[ 1.088062] usb usb7: configuration #1 chosen from 1 choice
[ 1.088080] hub 7-0:1.0: USB hub found
[ 1.088088] hub 7-0:1.0: 2 ports detected
[ 1.088135] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.088179] Initializing USB Mass Storage driver...
[ 1.088206] usbcore: registered new interface driver usb-storage
[ 1.088208] USB Mass Storage support registered.
[ 1.088232] usbcore: registered new interface driver libusual
[ 1.088240] usbcore: registered new interface driver ums-alauda
[ 1.088248] usbcore: registered new interface driver ums-cypress
[ 1.088256] usbcore: registered new interface driver ums-datafab
[ 1.088264] usbcore: registered new interface driver ums-freecom
[ 1.088272] usbcore: registered new interface driver ums-isd200
[ 1.088279] usbcore: registered new interface driver ums-jumpshot
[ 1.088288] usbcore: registered new interface driver ums-karma
[ 1.088296] usbcore: registered new interface driver ums-onetouch
[ 1.088304] usbcore: registered new interface driver ums-sddr09
[ 1.088312] usbcore: registered new interface driver ums-sddr55
[ 1.088320] usbcore: registered new interface driver ums-usbat
[ 1.088348] PNP: No PS/2 controller found. Probing ports directly.
[ 1.088643] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.088649] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.088703] mice: PS/2 mouse device common for all mice
[ 1.088781] rtc_cmos 00:03: RTC can wake from S4
[ 1.088806] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.088829] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.088840] cpuidle: using governor ladder
[ 1.088841] cpuidle: using governor menu
[ 1.089026] usbcore: registered new interface driver hiddev
[ 1.089038] usbcore: registered new interface driver usbhid
[ 1.089039] usbhid: v2.6:USB HID core driver
[ 1.089282] TCP cubic registered
[ 1.089336] NET: Registered protocol family 10
[ 1.089669] lo: Disabled Privacy Extensions
[ 1.089896] lib80211: common routines for IEEE802.11 drivers
[ 1.089898] lib80211_crypt: registered algorithm 'NULL'
[ 1.089951] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD1500HLFS-01G6U0_WD-WXJ608AR0429-part1
[ 1.248032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.248056] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.248074] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.250684] ata2.00: ATAPI: HL-DT-ST DVDRAM GH20NS15, IL00, max UDMA/100
[ 1.250998] ata1.00: ATA-8: WDC WD1500HLFS-01G6U0, 04.04V01, max UDMA/133
[ 1.251000] ata1.00: 293046768 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.251100] ata3.00: ATA-8: WDC WD2002FYPS-01U1B0, 04.05G04, max UDMA/133
[ 1.251102] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.253943] ata3.00: configured for UDMA/133
[ 1.254141] ata1.00: configured for UDMA/133
[ 1.254512] ata2.00: configured for UDMA/100
[ 1.268104] scsi 0:0:0:0: Direct-Access ATA WDC WD1500HLFS-0 04.0 PQ: 0 ANSI: 5
[ 1.268217] sd 0:0:0:0: [sda] 293046768 512-byte logical blocks: (150 GB/139 GiB)
[ 1.268245] sd 0:0:0:0: [sda] Write Protect is off
[ 1.268247] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.268261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.268344] sda: sda1 sda2 sda3
[ 1.273572] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.382858] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS15 IL00 PQ: 0 ANSI: 5
[ 1.382976] scsi 2:0:0:0: Direct-Access ATA WDC WD2002FYPS-0 04.0 PQ: 0 ANSI: 5
[ 1.383067] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.383094] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.383096] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.383110] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.383176] sdb:
[ 1.408020] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 1.434262] sdb1
[ 1.434413] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.434417] PM: Resume from disk failed.
[ 1.434425] registered taskstats version 1
[ 1.434527] Magic number: 10:753:426
[ 1.434584] rtc_cmos 00:03: setting system clock to 2010-01-18 10:26:24 UTC (1263810384)
[ 1.434633] Freeing unused kernel memory: 1620k freed
[ 1.434968] Write protecting the kernel read-only data: 7332k
[ 1.459951] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.459975] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.460043] scsi6 : pata_atiixp
[ 1.460094] scsi7 : pata_atiixp
[ 1.461366] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.461368] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.577066] usb 3-2: New USB device found, idVendor=046d, idProduct=c047
[ 1.577069] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.577071] usb 3-2: Product: USB Optical Mouse
[ 1.577072] usb 3-2: Manufacturer: Logitech
[ 1.577122] usb 3-2: configuration #1 chosen from 1 choice
[ 1.586202] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input0
[ 1.586244] generic-usb 0003:046D:C047.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.0-2/input0
[ 1.696021] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 1.792637] Uniform Multi-Platform E-IDE driver
[ 1.798616] processor LNXCPU:00: registered as cooling_device0
[ 1.798620] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.798975] processor LNXCPU:01: registered as cooling_device1
[ 1.799316] processor LNXCPU:02: registered as cooling_device2
[ 1.799658] processor LNXCPU:03: registered as cooling_device3
[ 1.803696] udev: starting version 146
[ 1.830403] usb 2-5: New USB device found, idVendor=05e3, idProduct=0608
[ 1.830407] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.830409] usb 2-5: Product: USB2.0 Hub
[ 1.830471] usb 2-5: configuration #1 chosen from 1 choice
[ 1.830795] hub 2-5:1.0: USB hub found
[ 1.831025] hub 2-5:1.0: 4 ports detected
[ 2.030465] PM: Marking nosave pages: 000000000009e000 - 0000000000100000
[ 2.030469] PM: Marking nosave pages: 00000000cff90000 - 0000000100000000
[ 2.030962] PM: Marking nosave pages: 0000000020000000 - 0000000024000000
[ 2.031191] PM: Basic memory bitmaps created
[ 2.062474] PM: Basic memory bitmaps freed
[ 2.068131] PM: Starting manual resume from disk
[ 2.068134] PM: Resume from partition 259:524288
[ 2.068135] PM: Checking hibernation image.
[ 2.068245] PM: Resume from disk failed.
[ 2.093020] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 2.110443] EXT4-fs (sda2): barriers enabled
[ 2.113161] kjournald2 starting: pid 320, dev sda2:8, commit interval 5 seconds
[ 2.121789] EXT4-fs (sda2): internal journal on sda2:8
[ 2.121793] EXT4-fs (sda2): delayed allocation enabled
[ 2.121795] EXT4-fs: file extents enabled
[ 2.121842] EXT4-fs: mballoc enabled
[ 2.121852] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 2.263052] usb 4-2: New USB device found, idVendor=046a, idProduct=0001
[ 2.263055] usb 4-2: New USB device strings: Mfr=1, Product=0, SerialNumber=0
[ 2.263057] usb 4-2: Manufacturer: Cherry GmbH
[ 2.263119] usb 4-2: configuration #1 chosen from 1 choice
[ 2.272205] input: Cherry GmbH as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input1
[ 2.272244] generic-usb 0003:046A:0001.0002: input,hidraw1: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:12.1-2/input0
[ 2.533020] usb 4-3: new low speed USB device using ohci_hcd and address 3
[ 2.711063] usb 4-3: New USB device found, idVendor=051d, idProduct=0002
[ 2.711067] usb 4-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.711069] usb 4-3: Product: Smart-UPS 1500 FW:653.13.I USB FW:7.3
[ 2.711071] usb 4-3: Manufacturer: American Power Conversion
[ 2.711072] usb 4-3: SerialNumber: AS0717131457
[ 2.711129] usb 4-3: configuration #1 chosen from 1 choice
[ 4.226127] generic-usb 0003:051D:0002.0003: hiddev0,hidraw2: USB HID v1.10 Device [American Power Conversion Smart-UPS 1500 FW:653.13.I USB FW:7.3] on usb-0000:00:12.1-3/input0
[ 4.971898] udev: starting version 146
[ 5.042863] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.042883] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.042901] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 5.043867] ACPI: WMI: Mapper loaded
[ 5.044593] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.044613] ACPI: Power Button [PWRF]
[ 5.044656] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 5.044675] ACPI: Power Button [PWRB]
[ 5.143383] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.143386] Uniform CD-ROM driver Revision: 3.20
[ 5.143455] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.175673] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.183230] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 5.183315] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 5.197954] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.197971] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.198035] r8169 0000:02:00.0: setting latency timer to 64
[ 5.198066] alloc irq_desc for 27 on node 0
[ 5.198067] alloc kstat_irqs on node 0
[ 5.198079] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 5.198509] eth0: RTL8168d/8111d at 0xffffc90011a90000, 90:e6:ba:c9:f4:c8, XID 283000c0 IRQ 27
[ 5.275780] EDAC MC: Ver: 2.1.0 Dec 18 2009
[ 5.366829] IT8712 SuperIO detected.
[ 5.367167] parport_pc 00:06: reported by Plug and Play ACPI
[ 5.367232] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 5.372892] alloc irq_desc for 23 on node 0
[ 5.372894] alloc kstat_irqs on node 0
[ 5.372901] ohci1394 0000:03:08.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.388663] EDAC amd64_edac: Ver: 3.2.0 Dec 18 2009
[ 5.388828] EDAC amd64: This node reports that Memory ECC is currently disabled.
[ 5.388831] EDAC amd64: bit 0x400000 in register F3x44 of the MISC_CONTROL device (0000:00:18.3) should be enabled
[ 5.388834] EDAC amd64: WARNING: ECC is NOT currently enabled by the BIOS. Module will NOT be loaded.
[ 5.388835] Either Enable ECC in the BIOS, or use the 'ecc_enable_override' parameter.
[ 5.388836] Might be a BIOS bug, if BIOS says ECC is enabled
[ 5.388837] Use of the override can cause unknown side effects.
[ 5.388847] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 5.430050] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 5.510135] ppdev: user-space parallel port driver
[ 5.562242] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.643905] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2.6.31/sound/pci/hda/hda_codec.c:3857: autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0)
[ 5.643909] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2.6.31/sound/pci/hda/hda_codec.c:3861: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.643913] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2.6.31/sound/pci/hda/hda_codec.c:3865: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 5.643916] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2.6.31/sound/pci/hda/hda_codec.c:3866: mono: mono_out=0x0
[ 5.643919] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2.6.31/sound/pci/hda/hda_codec.c:3869: dig-out=0x20/0x21
[ 5.643921] ALSA /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2.6.31/sound/pci/hda/hda_codec.c:3877: inputs: mic=0x1a, fmic=0x1e, line=0x1b, fline=0x0, cd=0x0, aux=0x0
[ 5.645999] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.646030] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 5.842169] Adding 8393920k swap on /dev/sda1. Priority:-1 extents:1 across:8393920k
[ 6.046847] device-mapper: uevent: version 1.0.3
[ 6.046923] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 6.283334] loop: module loaded
[ 6.291875] EXT4-fs (sda3): barriers enabled
[ 6.292244] kjournald2 starting: pid 756, dev sda3:8, commit interval 5 seconds
[ 6.299111] EXT4-fs (sda3): internal journal on sda3:8
[ 6.299114] EXT4-fs (sda3): delayed allocation enabled
[ 6.299117] EXT4-fs: file extents enabled
[ 6.308987] EXT4-fs: mballoc enabled
[ 6.308998] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 6.414812] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 6.415239] SGI XFS Quota Management subsystem
[ 6.437009] XFS mounting filesystem sdb1
[ 6.593332] Ending clean XFS mount for filesystem: sdb1
[ 6.708140] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1e00000000008c00]
[ 6.786157] fuse init (API version 7.12)
[ 8.647097] powernow-k8: Found 1 AMD Phenom(tm) II X4 925 Processor processors (4 cpu cores) (version 2.20.00)
[ 8.647141] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 8.647144] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 8.647146] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 8.647149] powernow-k8: 3 : pstate 3 (800 MHz)
[ 9.551024] [drm] Initialized drm 1.1.0 20060810
[ 9.566972] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.566991] pci 0000:01:00.0: setting latency timer to 64
[ 9.567261] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 9.707903] [drm] Setting GART location based on new memory map
[ 9.722890] [drm] Loading RV710 PFP Microcode
[ 9.722901] [drm] Loading RV710 CP Microcode
[ 9.737813] [drm] Resetting GPU
[ 9.737870] [drm] writeback test succeeded in 1 usecs
[ 10.267031] r8169: eth0: link up
[ 10.267048] r8169: eth0: link up
[ 11.252552] RPC: Registered udp transport module.
[ 11.252556] RPC: Registered tcp transport module.
[ 11.297919] Slow work thread pool: Starting up
[ 11.298337] Slow work thread pool: Ready
[ 11.298419] FS-Cache: Loaded
[ 11.357982] FS-Cache: Netfs 'nfs' registered for caching
[ 12.650405] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 13.298721] [drm] Resetting GPU
[ 21.036033] eth0: no IPv6 routers present
[ 146.826813] [drm] Loading RV710 PFP Microcode
[ 146.826842] [drm] Loading RV710 CP Microcode
[ 146.841772] [drm] Resetting GPU
[ 154.130762] CPU0 attaching NULL sched-domain.
[ 154.130774] CPU1 attaching NULL sched-domain.
[ 154.130780] CPU2 attaching NULL sched-domain.
[ 154.130786] CPU3 attaching NULL sched-domain.
[ 154.148532] CPU0 attaching sched-domain:
[ 154.148543] domain 0: span 0-3 level MC
[ 154.148550] groups: 0 1 2 3
[ 154.148568] CPU1 attaching sched-domain:
[ 154.148573] domain 0: span 0-3 level MC
[ 154.148579] groups: 1 2 3 0
[ 154.148592] CPU2 attaching sched-domain:
[ 154.148597] domain 0: span 0-3 level MC
[ 154.148602] groups: 2 3 0 1
[ 154.148615] CPU3 attaching sched-domain:
[ 154.148619] domain 0: span 0-3 level MC
[ 154.148624] groups: 3 0 1 2
[ 195.325191] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 195.343931] ISO 9660 Extensions: RRIP_1991A
[79634.944656] ata1: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
[79634.944676] ata1: irq_stat 0x00400000, PHY RDY changed
[79634.944691] ata1: SError: { RecovComm Persist PHYRdyChg 10B8B }
[79634.944708] ata1: hard resetting link
[79634.944735] ata3: exception Emask 0x50 SAct 0x0 SErr 0x90a02 action 0xe frozen
[79634.944748] ata3: irq_stat 0x00400000, PHY RDY changed
[79634.944760] ata3: SError: { RecovComm Persist HostInt PHYRdyChg 10B8B }
[79634.944774] ata3: hard resetting link
[79635.836086] ata1: SATA link down (SStatus 0 SControl 300)
[79635.861391] ata1: hard resetting link
[79639.313061] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[79639.341815] ata1.00: configured for UDMA/133
[79639.341850] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[79639.341862] ata1: irq_stat 0x00400040, connection status changed
[79639.349060] ata1.00: configured for UDMA/133
[79639.349078] ata1: EH complete
[79641.656076] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[79641.688909] ata3.00: configured for UDMA/133
[79641.688929] ata3: EH complete
[79644.477353] ata6: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xe frozen
[79644.477372] ata6: irq_stat 0x00400040, connection status changed
[79644.477387] ata6: SError: { PHYRdyChg CommWake 10B8B DevExch }
[79644.477406] ata6: hard resetting link
[79645.364077] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[79645.407969] ata6.00: ATA-7: ST3320620NS, 3.AEG, max UDMA/133
[79645.407986] ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[79645.466302] ata6.00: configured for UDMA/133
[79645.466329] ata6: EH complete
[79645.466522] scsi 5:0:0:0: Direct-Access ATA ST3320620NS 3.AE PQ: 0 ANSI: 5
[79645.466859] sd 5:0:0:0: Attached scsi generic sg3 type 0
[79645.467379] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[79645.467529] sd 5:0:0:0: [sdc] Write Protect is off
[79645.467542] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[79645.467593] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[79645.467898] sdc: sdc1 sdc2 sdc3
[79645.506961] sd 5:0:0:0: [sdc] Attached SCSI disk
[80391.082414] REISERFS (device sdc2): found reiserfs format "3.6" with standard journal
[80391.082453] REISERFS (device sdc2): using ordered data mode
[80391.089544] REISERFS (device sdc2): journal params: device sdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[80391.090610] REISERFS (device sdc2): checking transaction log (sdc2)
[80391.523508] REISERFS (device sdc2): Using r5 hash to sort names
[80391.523581] REISERFS (device sdc2): Created .reiserfs_priv - reserved for xattr storage.
[80400.398697] REISERFS (device sdc2): found reiserfs format "3.6" with standard journal
[80400.398742] REISERFS (device sdc2): using ordered data mode
[80400.402876] REISERFS (device sdc2): journal params: device sdc2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[80400.403935] REISERFS (device sdc2): checking transaction log (sdc2)
[80400.411892] REISERFS (device sdc2): Using r5 hash to sort names
[80765.236856] EXT4-fs (sdc3): barriers enabled
[80765.251127] kjournald2 starting: pid 14574, dev sdc3:8, commit interval 5 seconds
[80765.251586] EXT4-fs (sdc3): internal journal on sdc3:8
[80765.251607] EXT4-fs (sdc3): delayed allocation enabled
[80765.251620] EXT4-fs: file extents enabled
[80765.341889] EXT4-fs: mballoc enabled
[80765.341931] EXT4-fs (sdc3): mounted filesystem with ordered data mode
[80808.306719] EXT4-fs: mballoc: 0 blocks 0 reqs (0 success)
[80808.306736] EXT4-fs: mballoc: 0 extents scanned, 0 goal hits, 0 2^N hits, 0 breaks, 0 lost
[80808.306752] EXT4-fs: mballoc: 0 generated and it took 0
[80808.306761] EXT4-fs: mballoc: 0 preallocated, 0 discarded
[80835.571895] EXT4-fs (sdc3): barriers enabled
[80835.586163] kjournald2 starting: pid 14587, dev sdc3:8, commit interval 5 seconds
[80835.586582] EXT4-fs (sdc3): internal journal on sdc3:8
[80835.586603] EXT4-fs (sdc3): delayed allocation enabled
[80835.586616] EXT4-fs: file extents enabled
[80835.676777] EXT4-fs: mballoc enabled
[80835.676818] EXT4-fs (sdc3): mounted filesystem with ordered data mode
[80852.449414] BUG: unable to handle kernel NULL pointer dereference at (null)
[80852.449439] IP: [<ffffffff81274ac0>] memcpy_c+0x10/0x20
[80852.449462] PGD 17cdae067 PUD 2188dc067 PMD 0
[80852.449477] Oops: 0000 [#1] SMP
[80852.449488] last sysfs file: /sys/devices/pci0000:00/0000:00:11.0/host5/target5:0:0/5:0:0:0/block/sdc/sdc3/start
[80852.449505] CPU 3
[80852.449512] Modules linked in: reiserfs nls_utf8 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd nfs lockd fscache nfs_acl auth_rpcgss sunrpc radeon drm cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 fuse xfs exportfs loop dm_mod snd_hda_codec_atihdmi snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ppdev snd_timer amd64_edac_mod ohci1394 parport_pc snd parport edac_core snd_page_alloc ieee1394 r8169 i2c_piix4 pcspkr sr_mod cdrom serio_raw asus_atk0110 button wmi sg ext4 jbd2 crc16 fan processor ide_pci_generic atiixp ide_core ata_generic pata_marvell pata_atiixp thermal thermal_sys
[80852.449677] Pid: 14593, comm: mount Not tainted 2.6.31.8-0.1-vanilla #1 System Product Name
[80852.449692] RIP: 0010:[<ffffffff81274ac0>] [<ffffffff81274ac0>] memcpy_c+0x10/0x20
[80852.449712] RSP: 0018:ffff880225053c20 EFLAGS: 00010202
[80852.449722] RAX: ffff880204d847e0 RBX: ffff880225053ce8 RCX: 0000000000000001
[80852.449734] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff880204d847e0
[80852.449746] RBP: ffff880225053c68 R08: fffffffffffffffa R09: ffff880131061007
[80852.449758] R10: 000000000000002c R11: 0000000000000202 R12: ffff880204d847e0
[80852.449770] R13: ffff880225053ce4 R14: 0000000000000000 R15: 00000000ffffffea
[80852.449783] FS: 00007f6ba3d1b7d0(0000) GS:ffff880028088000(0000) knlGS:00000000f6937970
[80852.449797] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[80852.449808] CR2: 0000000000000000 CR3: 00000001985f7000 CR4: 00000000000006e0
[80852.449820] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[80852.449832] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[80852.449844] Process mount (pid: 14593, threadinfo ffff880225052000, task ffff88019814a440)
[80852.449857] Stack:
[80852.449863] ffffffff812757ec ffff880225053ce8 000000003b3945e5 ffff88017c0fbc00
[80852.449878] <0> ffff880224580c00 ffff880131061000 ffff880225053cd0 ffff88017c0fbc00
[80852.449897] <0> ffff880225053ce8 ffff880225053c88 ffffffff812758ee ffff880131061000
[80852.449917] Call Trace:
[80852.449929] [<ffffffff812757ec>] ? match_number+0x6c/0xd0
[80852.449945] [<ffffffff812758ee>] match_int+0x1e/0x40
[80852.449992] [<ffffffffa00b6d7b>] parse_options+0x1ab/0x8b0 [ext4]
[80852.450010] [<ffffffff8110603b>] ? __filemap_fdatawrite_range+0x5b/0x80
[80852.450057] [<ffffffffa00be436>] ext4_remount+0xe6/0x4d0 [ext4]
[80852.450073] [<ffffffff81156bea>] do_remount_sb+0x7a/0x180
[80852.450086] [<ffffffff81172ffe>] do_remount+0x14e/0x170
[80852.450098] [<ffffffff811761e2>] do_mount+0x1f2/0x240
[80852.450110] [<ffffffff811732d2>] ? copy_mount_options+0x102/0x1b0
[80852.450123] [<ffffffff811762ce>] sys_mount+0x9e/0x100
[80852.450138] [<ffffffff8100c602>] system_call_fastpath+0x16/0x1b
[80852.450148] Code: 00 48 3b 42 20 73 07 48 8b 50 f9 31 c0 c3 31 d2 48 c7 c0 f2 ff ff ff c3 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 f3 48 a5 89 d1 <f3> a4 c3 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 eb de f8 89 d1
[80852.450247] RIP [<ffffffff81274ac0>] memcpy_c+0x10/0x20
[80852.450261] RSP <ffff880225053c20>
[80852.450269] CR2: 0000000000000000
[80852.450279] ---[ end trace af3c39f272f308bf ]---
[80852.450287] ------------[ cut here ]------------
[80852.450301] WARNING: at /usr/src/packages/BUILD/kernel-vanilla-2.6.31.8/linux-2.6.31/kernel/exit.c:895 do_exit+0x36a/0x370()
[80852.450317] Hardware name: System Product Name
[80852.450325] Modules linked in: reiserfs nls_utf8 snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device edd nfs lockd fscache nfs_acl auth_rpcgss sunrpc radeon drm cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 fuse xfs exportfs loop dm_mod snd_hda_codec_atihdmi snd_hda_codec_via snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ppdev snd_timer amd64_edac_mod ohci1394 parport_pc snd parport edac_core snd_page_alloc ieee1394 r8169 i2c_piix4 pcspkr sr_mod cdrom serio_raw asus_atk0110 button wmi sg ext4 jbd2 crc16 fan processor ide_pci_generic atiixp ide_core ata_generic pata_marvell pata_atiixp thermal thermal_sys
[80852.450477] Pid: 14593, comm: mount Tainted: G D 2.6.31.8-0.1-vanilla #1
[80852.450489] Call Trace:
[80852.450501] [<ffffffff8106c450>] warn_slowpath_common+0x80/0xd0
[80852.450514] [<ffffffff8106c4c2>] warn_slowpath_null+0x22/0x40
[80852.450528] [<ffffffff810718ca>] do_exit+0x36a/0x370
[80852.450540] [<ffffffff8106c0f1>] ? print_oops_end_marker+0x31/0x50
[80852.450556] [<ffffffff81512893>] oops_end+0xd3/0x130
[80852.450570] [<ffffffff810433ab>] no_context+0x10b/0x1a0
[80852.450583] [<ffffffff810435bd>] __bad_area_nosemaphore+0x17d/0x230
[80852.450597] [<ffffffff81131dfd>] ? page_add_new_anon_rmap+0x6d/0x80
[80852.450613] [<ffffffff81039646>] ? default_spin_lock_flags+0x26/0x50
[80852.450627] [<ffffffff8126ffd9>] ? __up_read+0xa9/0xf0
[80852.450640] [<ffffffff8104370d>] __bad_area+0x5d/0x90
[80852.450653] [<ffffffff81043761>] bad_area+0x21/0x40
[80852.450664] [<ffffffff815149d9>] do_page_fault+0x399/0x3b0
[80852.450678] [<ffffffff81511985>] page_fault+0x25/0x30
[80852.450692] [<ffffffff81274ac0>] ? memcpy_c+0x10/0x20
[80852.450705] [<ffffffff812757ec>] ? match_number+0x6c/0xd0
[80852.450718] [<ffffffff812758ee>] match_int+0x1e/0x40
[80852.450758] [<ffffffffa00b6d7b>] parse_options+0x1ab/0x8b0 [ext4]
[80852.450774] [<ffffffff8110603b>] ? __filemap_fdatawrite_range+0x5b/0x80
[80852.450816] [<ffffffffa00be436>] ext4_remount+0xe6/0x4d0 [ext4]
[80852.450831] [<ffffffff81156bea>] do_remount_sb+0x7a/0x180
[80852.450842] [<ffffffff81172ffe>] do_remount+0x14e/0x170
[80852.450854] [<ffffffff811761e2>] do_mount+0x1f2/0x240
[80852.450866] [<ffffffff811732d2>] ? copy_mount_options+0x102/0x1b0
[80852.450879] [<ffffffff811762ce>] sys_mount+0x9e/0x100
[80852.450892] [<ffffffff8100c602>] system_call_fastpath+0x16/0x1b
[80852.450903] ---[ end trace af3c39f272f308c0 ]---
[80853.547291] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]